/[svn]/ircd-hybrid-8/doc/example.conf
ViewVC logotype

Contents of /ircd-hybrid-8/doc/example.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1310 - (show annotations)
Mon Mar 26 15:45:02 2012 UTC (10 years, 3 months ago) by michael
File size: 34822 byte(s)
- move example configuration files to doc/ folder

1 /* doc/example.conf - ircd-hybrid-7 Example configuration file
2 * Copyright (C) 2000-2011 Hybrid Development Team
3 *
4 * Written by ejb, wcampbel, db, leeh and others
5 * Other example configurations can be found in the source dir under
6 * etc/.
7 *
8 * $Id$
9 */
10
11 /* IMPORTANT NOTES:
12 *
13 * auth {} blocks MUST be specified in order of precedence. The first one
14 * that matches a user will be used. So place spoofs first, then specials,
15 * then general access.
16 *
17 * Shell style (#), C++ style (//) and C style comments are supported.
18 *
19 * Files may be included by either:
20 * .include "filename"
21 * .include <filename>
22 *
23 * Times/durations are written as:
24 * 12 hours 30 minutes 1 second
25 *
26 * Valid units of time:
27 * month, week, day, hour, minute, second
28 *
29 * Valid units of size:
30 * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31 *
32 * Sizes and times may be singular or plural.
33 */
34
35 /* EFNET NOTE:
36 *
37 * This config file is NOT suitable for EFNet. EFNet admins should use
38 * example.efnet.conf
39 */
40
41 /*
42 * serverinfo {}: contains information about the server. (OLD M:)
43 */
44 serverinfo {
45 /*
46 * name: the name of this server. This cannot be changed at runtime.
47 */
48 name = "hades.arpa";
49
50 /*
51 * sid: a server's unique ID. This is three characters long and must
52 * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
53 * a digit, followed by 2 alpha-numerical letters.
54 * NOTE: The letters must be capitalized. This cannot be changed at runtime.
55 */
56 sid = "_CHANGE_ME_";
57
58 /*
59 * description: the description of the server. '[' and ']' may not
60 * be used here for compatibility with older servers.
61 */
62 description = "hybrid-7 test server";
63
64 /*
65 * network info: the name and description of the network this server
66 * is on. Shown in the 005 reply and used with serverhiding.
67 */
68 network_name = "MyNet";
69 network_desc = "This is My Network";
70
71 /*
72 * hub: allow this server to act as a hub and have multiple servers
73 * connected to it.
74 */
75 hub = no;
76
77 /*
78 * vhost: the IP to bind to when we connect outward to ipv4 servers.
79 * This should be an ipv4 IP only, or "*" for INADDR_ANY.
80 */
81 #vhost = "192.169.0.1";
82
83 /*
84 * vhost6: the IP to bind to when we connect outward to ipv6 servers.
85 * This should be an ipv6 IP only, or "*" for INADDR_ANY.
86 */
87 #vhost6 = "3ffe:80e8:546::2";
88
89 /* max_clients: the maximum number of clients allowed to connect */
90 max_clients = 512;
91
92 /*
93 * rsa_private_key_file: the path to the file containing our
94 * rsa key for cryptlink.
95 *
96 * Example command to store a 2048 bit RSA keypair in
97 * rsa.key, and the public key in rsa.pub:
98 *
99 * openssl genrsa -out rsa.key 2048
100 * openssl rsa -in rsa.key -pubout -out rsa.pub
101 * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
102 * chmod 0600 rsa.key
103 * chmod 0644 rsa.pub
104 */
105 #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
106
107 /*
108 * ssl_certificate_file: the path to the file containing our
109 * ssl certificate for encrypted client connection.
110 *
111 * This assumes your private RSA key is stored in rsa.key. You
112 * MUST have an RSA key in order to generate the certificate
113 *
114 * openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
115 *
116 * See http://www.openssl.org/docs/HOWTO/certificates.txt
117 *
118 * Please use the following values when generating the cert
119 *
120 * Organization Name: Network Name
121 * Organization Unit Name: changme.someirc.net
122 * Common Name: irc.someirc.net
123 * E-mail: you@domain.com
124 */
125 #ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
126
127
128 #ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
129
130 /*
131 * ssl_cipher_list:
132 *
133 * List of ciphers that are supported by _this_ server. Can be used to enforce
134 * specific ciphers for incoming SSL/TLS connections.
135 * If a client (which also includes incoming server connections) isn't capable
136 * of any cipher listed below, the connection will be simply rejected.
137 *
138 * A list of supported ciphers can be obtained by running:
139 *
140 * openssl ciphers -ssl3 -tls1 -v
141 *
142 * Multiple ciphers are separated by colons. The order of preference is from
143 * left to right.
144 */
145 #ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
146
147 /*
148 * ssl_server_protocol:
149 * SSL/TLS protocols we provide for incoming secure connections.
150 * This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
151 * SSLv2 is not suppported. This cannot be changed at runtime.
152 */
153 #ssl_server_protocol = sslv3, tlsv1;
154 };
155
156 /*
157 * admin {}: contains admin information about the server
158 */
159 admin {
160 name = "Smurf target";
161 description = "Main Server Administrator";
162 email = "<syn@packets.r.us>";
163 };
164
165 /*
166 * class {}: contains information about classes for users
167 */
168 class {
169 /* name: the name of the class. classes are text now */
170 name = "users";
171
172 /*
173 * ping_time: how often a client must reply to a PING from the
174 * server before they are dropped.
175 */
176 ping_time = 90 seconds;
177
178 /*
179 * number_per_ip: how many local users are allowed to connect
180 * from one IP (optional)
181 */
182 number_per_ip = 2;
183
184 /*
185 * max_local: how many local users are allowed to connect
186 * from one ident@host (optional)
187 */
188 max_local = 2;
189
190 /*
191 * max_global: network-wide limit of users per ident@host (optional)
192 */
193 max_global = 10;
194
195 /*
196 * max_number: the maximum number of users allowed in this class (optional)
197 */
198 max_number = 100;
199
200 /*
201 * the following lines are optional and allow you to define
202 * how many users can connect from one /NN subnet
203 */
204 cidr_bitlen_ipv4 = 24;
205 cidr_bitlen_ipv6 = 120;
206 number_per_cidr = 16;
207
208 /*
209 * sendq: the amount of data allowed in a clients queue before
210 * they are dropped.
211 */
212 sendq = 100 kbytes;
213 };
214
215 class {
216 name = "opers";
217 ping_time = 90 seconds;
218 number_per_ip = 10;
219 max_number = 100;
220 sendq = 100kbytes;
221 };
222
223 class {
224 name = "server";
225 ping_time = 90 seconds;
226
227 /*
228 * ping_warning: how fast a server must reply to a PING before
229 * a warning to opers is generated.
230 */
231 ping_warning = 15 seconds;
232
233 /*
234 * connectfreq: only used in server classes. Specifies the delay
235 * between autoconnecting to servers.
236 */
237 connectfreq = 5 minutes;
238
239 /* max number: the amount of servers to autoconnect to */
240 max_number = 1;
241
242 /* sendq: servers need a higher sendq as they send more data */
243 sendq = 2 megabytes;
244 };
245
246 /*
247 * listen {}: contains information about the ports ircd listens on
248 */
249 listen {
250 /*
251 * port: the specific port to listen on. If no host is specified
252 * before, it will listen on all available IPs.
253 *
254 * Ports are separated via a comma, a range may be specified using ".."
255 */
256
257 /* port: listen on all available IPs, ports 6665 to 6669 */
258 port = 6665 .. 6669;
259
260 /*
261 * Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
262 * unless you are an administrator.
263 *
264 * NOTE: The "flags" directive has to come before "port". Always!
265 *
266 * Currently available flags are:
267 *
268 * ssl - Port is for SSL client connections only
269 * server - Only server connections are permitted
270 * hidden - Port is hidden from /stats P, unless you're an admin
271 */
272 flags = hidden, ssl;
273 host = "192.168.0.1";
274 port = 6697;
275
276 /*
277 * host: set a specific IP/host the ports after the line will listen
278 * on. This may be ipv4 or ipv6.
279 */
280 host = "1.2.3.4";
281 port = 7000, 7001;
282
283 host = "3ffe:1234:a:b:c::d";
284 port = 7002;
285 };
286
287 /*
288 * auth {}: allow users to connect to the ircd
289 */
290 auth {
291 /*
292 * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
293 * lines are permitted per auth block.
294 */
295 user = "*@172.16.0.0/12";
296 user = "*test@123D:B567:*";
297
298 /* password: an optional password that is required to use this block */
299 password = "letmein";
300
301 /*
302 * encrypted: controls whether the auth password above has been
303 * encrypted.
304 */
305 encrypted = yes;
306
307 /*
308 * spoof: fake the users host to this. This is free-form,
309 * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
310 */
311 spoof = "I.still.hate.packets";
312
313 /* class: the class the user is placed in */
314 class = "opers";
315
316 /*
317 * need_password - don't allow users who haven't supplied the correct
318 * password to connect using another auth{} block
319 * ('&' prefix on /stats I if disabled)
320 * need_ident - require the user to have identd to connect ('+' prefix on /stats I)
321 * spoof_notice - enable spoofing notification to admins
322 * exceed_limit - allow a user to exceed class limits ('>' prefix on /stats I)
323 * kline_exempt - exempt this user from k/glines ('^' prefix on /stats I)
324 * gline_exempt - exempt this user from glines ('_' prefix on /stats I)
325 * resv_exempt - exempt this user from resvs ('$' prefix on /stats I)
326 * no_tilde - remove ~ from a user with no ident ('-' prefix on /stats I)
327 * can_flood - allow this user to exceed flood limits ('|' prefix on /stats I)
328 */
329 flags = need_password, spoof_notice, exceed_limit, kline_exempt,
330 gline_exempt, resv_exempt, no_tilde, can_flood;
331 };
332
333 auth {
334 /*
335 * redirect: the server and port to redirect a user to. A user does
336 * not have to obey the redirection, the ircd just suggests an alternative
337 * server for them.
338 */
339 redirserv = "this.is.not.a.real.server";
340 redirport = 6667;
341
342 user = "*.server";
343
344 /* class: a class is required even though it is not used */
345 class = "users";
346 };
347
348 auth {
349 user = "*@*";
350 class = "users";
351 flags = need_ident;
352 };
353
354 /*
355 * operator {}: defines ircd operators
356 *
357 * ircd-hybrid no longer supports local operators, privileges are
358 * controlled via flags.
359 */
360 operator {
361 /* name: the name of the oper */
362 name = "god";
363
364 /*
365 * user: the user@host required for this operator. Multiple
366 * user="" lines are supported.
367 */
368 user = "*god@192.168.0.0/16";
369 user = "*@127.0.0.0/8";
370
371 /*
372 * password: the password required to oper. By default this will
373 * need to be encrypted by using the provided mkpasswd tool.
374 * Several password hash algorithms are available depending
375 * on your system's crypt() implementation. For example, a modern
376 * glibc already has support for SHA-256/512, and MD5 encryption
377 * algorithms.
378 */
379 password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
380
381 /*
382 * encrypted: controls whether the oper password above has been
383 * encrypted.
384 */
385 encrypted = yes;
386
387 /*
388 * rsa_public_key_file: the public key for this oper when using Challenge.
389 * A password should not be defined when this is used, see
390 * doc/challenge.txt for more information.
391 */
392 # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
393
394 /* class: the class the oper joins when they successfully /oper */
395 class = "opers";
396
397 /*
398 * umodes: default usermodes opers get when they /oper. If defined,
399 * it will override oper_umodes settings in general {}.
400 * Available usermodes:
401 *
402 * +b - bots - See bot and drone flooding notices
403 * +c - cconn - Client connection/quit notices
404 * +C - cconn_full - Client connection/quit notices full
405 * +D - deaf - Don't receive channel messages
406 * +d - debug - See debugging notices
407 * +f - full - See I: line full notices
408 * +G - softcallerid - Server Side Ignore for users not on your channels
409 * +g - callerid - Server Side Ignore (for privmsgs etc)
410 * +H - hidden - Hides operator status to other users
411 * +i - invisible - Not shown in NAMES or WHO unless you share a
412 * a channel
413 * +j - rej - See rejected client notices
414 * +k - skill - See server generated KILL messages
415 * +l - locops - See LOCOPS messages
416 * +n - nchange - See client nick changes
417 * +s - servnotice - See general server notices
418 * +u - unauth - See unauthorized client notices
419 * +w - wallop - See server generated WALLOPS
420 * +x - external - See remote server connection and split notices
421 * +y - spy - See LINKS, STATS, TRACE notices etc.
422 * +z - operwall - See oper generated WALLOPS
423 */
424 # umodes = locops, servnotice, operwall, wallop;
425
426 /*
427 * privileges: controls the activities and commands an oper is
428 * allowed to do on the server. All options default to no.
429 * Available options:
430 *
431 * module - allows MODLIST, MODRESTART, MODLOAD, MODUNLOAD
432 * global_kill - allows remote users to be /KILL'd
433 * remote - allows remote SQUIT and CONNECT
434 * remoteban - allows remote KLINE/UNKLINE
435 * dline - allows DLINE
436 * undline - allows UNDLINE
437 * kline - allows KILL and KLINE
438 * unkline - allows UNKLINE
439 * gline - allows GLINE
440 * xline - allows XLINE
441 * globops - allows GLOBOPS
442 * operwall - allows OPERWALL
443 * nick_changes - allows oper to see nickchanges via usermode +n
444 * rehash - allows oper to REHASH config
445 * die - allows DIE
446 * restart - allows RESTART
447 * admin - gives admin privileges. admins for example,
448 * may see the real IP addresses of servers.
449 */
450 flags = global_kill, remote, kline, unkline, xline, globops, restart,
451 die, rehash, nick_changes, admin, operwall, module;
452 };
453
454 service {
455 name = "service.someserver";
456 name = "stats.someserver";
457 };
458
459 /*
460 * connect {}: controls servers we connect to
461 */
462 connect {
463 /* name: the name of the server */
464 name = "irc.uplink.com";
465
466 /*
467 * host: the host or IP to connect to. If a hostname is used it
468 * must match the reverse dns of the server.
469 */
470 host = "192.168.0.1";
471
472 /*
473 * vhost: the IP to bind to when we connect outward to servers.
474 * serverinfo::vhost and serverinfo::vhost6 will be overridden
475 * by this directive.
476 */
477 vhost = "192.168.0.2";
478
479 /*
480 * passwords: the passwords we send (OLD C:) and accept (OLD N:).
481 * The remote server will have these passwords reversed.
482 */
483 send_password = "password";
484 accept_password = "anotherpassword";
485
486 /*
487 * encrypted: controls whether the accept_password above has been
488 * encrypted.
489 */
490 encrypted = no;
491
492 /* port: the port to connect to this server on */
493 port = 6666;
494
495 /*
496 * hub_mask: the mask of servers that this server may hub. Multiple
497 * entries are permitted
498 */
499 hub_mask = "*";
500
501 /*
502 * leaf_mask: the mask of servers this server may not hub. Multiple
503 * entries are permitted. Useful for forbidding EU -> US -> EU routes.
504 */
505 # leaf_mask = "*.uk";
506
507 /* class: the class this server is in */
508 class = "server";
509
510 #ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
511
512 /*
513 * autoconn - controls whether we autoconnect to this server or not,
514 * dependent on class limits. By default, this is disabled.
515 * burst_away - This will send the /away string that users have set
516 * on the server burst. Note this can be a lot of data
517 * and slow down your server burst.
518 * topicburst - Send topics to this server during channel burst. Works
519 * only if the server we are connecting to is capable
520 * of TBURST/TB.
521 * ssl - Initiates a TLS/SSL connection.
522 */
523 # flags = autoconn, burst_away, topicburst;
524 };
525
526 connect {
527 name = "ipv6.some.server";
528 host = "3ffd:dead:beef::1";
529 send_password = "password";
530 accept_password = "password";
531 port = 6666;
532
533 /*
534 * aftype: controls whether the connection uses "ipv4" or "ipv6".
535 * Default is ipv4.
536 */
537 aftype = ipv6;
538 class = "server";
539 };
540
541 /*
542 * cluster {}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
543 * automatically
544 */
545 cluster {
546 /*
547 * name: the server to share with, this can take wildcards
548 *
549 * NOTE: only local actions will be clustered, meaning if
550 * the server receives a shared kline/unkline/etc, it
551 * will not be propagated to clustered servers.
552 *
553 * Remote servers are not necessarily required to accept
554 * clustered lines, they need a shared{} for *THIS* server
555 * in order to accept them.
556 */
557 name = "*.arpa";
558
559 /*
560 * type: list of what to share, options are as follows:
561 * dline - share dlines
562 * undline - share undlines
563 * kline - share klines
564 * unkline - share unklines
565 * xline - share xlines
566 * unxline - share unxlines
567 * resv - share resvs
568 * unresv - share unresvs
569 * locops - share locops
570 * all - share all of the above (default)
571 */
572 type = kline, unkline, locops, xline, resv;
573 };
574
575 /*
576 * shared {}: users that are allowed to remote kline
577 *
578 * NOTE: This can be effectively used for remote klines.
579 * Please note that there is no password authentication
580 * for users setting remote klines. You must also be
581 * /oper'd in order to issue a remote kline.
582 */
583 shared {
584 /*
585 * name: the server the user must be on to set klines. If this is not
586 * specified, the user will be allowed to kline from all servers.
587 */
588 name = "irc2.some.server";
589
590 /*
591 * user: the user@host mask that is allowed to set klines. If this is
592 * not specified, all users on the server above will be allowed to set
593 * a remote kline.
594 */
595 user = "oper@my.host.is.spoofed";
596
597 /*
598 * type: list of what to share, options are as follows:
599 * dline - allow oper/server to dline
600 * undline - allow oper/server to undline
601 * kline - allow oper/server to kline
602 * unkline - allow oper/server to unkline
603 * xline - allow oper/server to xline
604 * unxline - allow oper/server to unxline
605 * resv - allow oper/server to resv
606 * unresv - allow oper/server to unresv
607 * locops - allow oper/server to locops - only used for servers that cluster
608 * all - allow oper/server to do all of the above (default)
609 */
610 type = kline, unkline, resv;
611 };
612
613 /*
614 * kill {}: users that are not allowed to connect
615 * Oper issued klines will be added to the specified kline config
616 */
617 kill {
618 user = "bad@*.hacked.edu";
619 reason = "Obviously hacked account";
620 };
621
622 kill {
623 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
624
625 /*
626 * NOTE: You have to set type=regex; when using a regular expression
627 * based user entry
628 */
629 type = regex;
630 };
631
632 /*
633 * deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
634 * Oper issued dlines will be added to the specified dline config
635 */
636 deny {
637 ip = "10.0.1.0/24";
638 reason = "Reconnecting vhosted bots";
639 };
640
641 /*
642 * exempt {}: IPs that are exempt from deny {} and Dlines
643 */
644 exempt {
645 ip = "192.168.0.0/16";
646 };
647
648 /*
649 * resv {}: nicks and channels users may not use/join
650 */
651 resv {
652 /* reason: the reason for the proceeding resv's */
653 reason = "Reserved for services";
654
655 /* resv: the nicks and channels users may not join/use */
656 nick = "Global";
657 nick = "DevNull";
658 nick = "Services";
659 nick = "StatServ";
660 nick = "HostServ";
661 nick = "NickServ";
662 nick = "ChanServ";
663 nick = "MemoServ";
664 nick = "OperServ";
665 channel = "#services";
666
667 /* resv: wildcard masks are also supported in nicks only */
668 reason = "Clone bots";
669 nick = "clone*";
670 };
671
672 /*
673 * gecos {}: The X: replacement, used for banning users based on
674 * their "realname".
675 */
676 gecos {
677 name = "*sex*";
678 reason = "Possible spambot";
679 };
680
681 gecos {
682 name = "sub7server";
683 reason = "Trojan drone";
684 };
685
686 gecos {
687 name = "*http*";
688 reason = "Spambot";
689 };
690
691 gecos {
692 name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
693
694 /*
695 * NOTE: You have to set type=regex; when using a regular expression
696 * based name entry
697 */
698 type = regex;
699 };
700
701 /*
702 * channel {}: The channel block contains options pertaining to channels
703 */
704 channel {
705 /*
706 * disable_fake_channels: this option, if set to 'yes', will
707 * disallow clients to create or join channels that have one
708 * of the following ASCII characters in their name:
709 *
710 * 2 | bold
711 * 3 | mirc color
712 * 15 | plain text
713 * 22 | reverse
714 * 31 | underline
715 * 160 | non-breaking space
716 */
717 disable_fake_channels = yes;
718
719 /*
720 * restrict_channels: reverse channel RESVs logic, only reserved
721 * channels are allowed
722 */
723 restrict_channels = no;
724
725 /*
726 * disable_local_channels: prevent users from joining &channels.
727 */
728 disable_local_channels = no;
729
730 /*
731 * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
732 * that can join a +i channel without an invite.
733 */
734 use_invex = yes;
735
736 /*
737 * use_except: Enable/disable channel mode +e, a n!u@h list of masks
738 * that can join a channel through a ban (+b).
739 */
740 use_except = yes;
741
742 /*
743 * use_knock: Allows users to request an invite to a channel that
744 * is locked somehow (+ikl). If the channel is +p or you are banned
745 * the knock will not be sent.
746 */
747 use_knock = yes;
748
749 /*
750 * knock_delay: The amount of time a user must wait between issuing
751 * the knock command.
752 */
753 knock_delay = 5 minutes;
754
755 /*
756 * knock_delay_channel: How often a knock to any specific channel
757 * is permitted, regardless of the user sending the knock.
758 */
759 knock_delay_channel = 1 minute;
760
761 /*
762 * burst_topicwho: enable sending of who set topic on topicburst
763 * default is yes
764 */
765 burst_topicwho = yes;
766
767 /*
768 * max_chans_per_user: The maximum number of channels a user can
769 * join/be on.
770 */
771 max_chans_per_user = 25;
772
773 /* quiet_on_ban: stop banned people talking in channels. */
774 quiet_on_ban = yes;
775
776 /* max_bans: maximum number of +b/e/I modes in a channel */
777 max_bans = 25;
778
779 /*
780 * how many joins in how many seconds constitute a flood, use 0 to
781 * disable. +b opers will be notified (changeable via /set)
782 */
783 join_flood_count = 16;
784 join_flood_time = 8 seconds;
785
786 /*
787 * splitcode: The ircd will now check splitmode every few seconds.
788 *
789 * Either split users or split servers can activate splitmode, but
790 * both conditions must be met for the ircd to deactivate splitmode.
791 *
792 * You may force splitmode to be permanent by /quote set splitmode on
793 */
794
795 /*
796 * default_split_user_count: when the usercount is lower than this level,
797 * consider ourselves split. This must be set for automatic splitmode.
798 */
799 default_split_user_count = 0;
800
801 /*
802 * default_split_server_count: when the servercount is lower than this,
803 * consider ourselves split. This must be set for automatic splitmode.
804 */
805 default_split_server_count = 0;
806
807 /* no_create_on_split: disallow users creating channels on split. */
808 no_create_on_split = yes;
809
810 /* no_join_on_split: disallow users joining channels at all on a split. */
811 no_join_on_split = no;
812 };
813
814 /*
815 * serverhide {}: The serverhide block contains the options regarding
816 * serverhiding
817 */
818 serverhide {
819 /*
820 * flatten_links: this option will show all servers in /links appear
821 * that they are linked to this current server
822 */
823 flatten_links = no;
824
825 /*
826 * links_delay: how often to update the links file when it is
827 * flattened.
828 */
829 links_delay = 5 minutes;
830
831 /*
832 * hidden: hide this server from a /links output on servers that
833 * support it. This allows hub servers to be hidden etc.
834 */
835 hidden = no;
836
837 /*
838 * disable_hidden: prevent servers hiding themselves from a
839 * /links output.
840 */
841 disable_hidden = no;
842
843 /*
844 * hide_servers: hide remote servernames everywhere and instead use
845 * hidden_name and network_desc.
846 */
847 hide_servers = no;
848
849 /*
850 * Use this as the servername users see if hide_servers = yes.
851 */
852 hidden_name = "*.hidden.com";
853
854 /*
855 * hide_server_ips: If this is disabled, opers will be unable to see
856 * servers ips and will be shown a masked ip, admins will be shown the
857 * real ip.
858 *
859 * If this is enabled, nobody can see a servers ip. *This is a kludge*,
860 * it has the side effect of hiding the ips everywhere, including
861 * logfiles.
862 *
863 * We recommend you leave this disabled, and just take care with who you
864 * give admin=yes; to.
865 */
866 hide_server_ips = no;
867 };
868
869 /*
870 * general {}: The general block contains many of the options that were once
871 * compiled in options in config.h. The general block is read at start time.
872 */
873 general {
874 /* services_name: servername of nick/channel services */
875 services_name = "service.someserver";
876
877 /* max_watch: maximum WATCH entries a client can have. */
878 max_watch = 60;
879
880 /*
881 * gline_min_cidr: the minimum required length of a CIDR bitmask
882 * for IPv4 based glines
883 */
884 gline_min_cidr = 16;
885
886 /*
887 * gline_min_cidr6: the minimum required length of a CIDR bitmask
888 * for IPv6 based glines
889 */
890 gline_min_cidr6 = 48;
891
892 /*
893 * Whether to automatically set mode +i on connecting users.
894 */
895 invisible_on_connect = yes;
896
897 /*
898 * Show "actually using host <ip>" on /whois when possible.
899 */
900 use_whois_actually = yes;
901
902 /*
903 * Max time from the nickname change that still causes KILL
904 * automatically to switch for the current nick of that user.
905 */
906 kill_chase_time_limit = 90 seconds;
907
908 /*
909 * If hide_spoof_ips is disabled, opers will be allowed to see the real
910 * IP of spoofed users in /trace etc. If this is defined they will be
911 * shown a masked IP.
912 */
913 hide_spoof_ips = yes;
914
915 /*
916 * Ignore bogus timestamps from other servers. Yes, this will desync
917 * the network, but it will allow chanops to resync with a valid non TS 0
918 *
919 * This should be enabled network wide, or not at all.
920 */
921 ignore_bogus_ts = no;
922
923 /*
924 * disable_auth: completely disable ident lookups; if you enable this,
925 * be careful of what you set need_ident to in your auth {} blocks
926 */
927 disable_auth = no;
928
929 /* disable_remote_commands: disable users doing commands on remote servers */
930 disable_remote_commands = no;
931
932 /*
933 * tkline_expire_notices: enables or disables temporary kline/xline
934 * expire notices.
935 */
936 tkline_expire_notices = no;
937
938 /*
939 * default_floodcount: the default value of floodcount that is configurable
940 * via /quote set floodcount. This is the amount of lines a user
941 * may send to any other user/channel in one second.
942 */
943 default_floodcount = 10;
944
945 /*
946 * failed_oper_notice: send a notice to all opers on the server when
947 * someone tries to OPER and uses the wrong password, host or ident.
948 */
949 failed_oper_notice = yes;
950
951 /*
952 * dots_in_ident: the amount of '.' characters permitted in an ident
953 * reply before the user is rejected.
954 */
955 dots_in_ident = 2;
956
957 /*
958 * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
959 * placed via the server. klines hand placed are exempt from limits.
960 * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
961 */
962 min_nonwildcard = 4;
963
964 /*
965 * min_nonwildcard_simple: the minimum non wildcard characters in
966 * gecos bans. wildcard chars: '*' '?' '#'
967 */
968 min_nonwildcard_simple = 3;
969
970 /* max_accept: maximum allowed /accept's for +g usermode */
971 max_accept = 20;
972
973 /* anti_nick_flood: enable the nickflood control code */
974 anti_nick_flood = yes;
975
976 /* nick flood: the nick changes allowed in the specified period */
977 max_nick_time = 20 seconds;
978 max_nick_changes = 5;
979
980 /*
981 * anti_spam_exit_message_time: the minimum time a user must be connected
982 * before custom quit messages are allowed.
983 */
984 anti_spam_exit_message_time = 5 minutes;
985
986 /*
987 * ts delta: the time delta allowed between server clocks before
988 * a warning is given, or before the link is dropped. all servers
989 * should run ntpdate/rdate to keep clocks in sync
990 */
991 ts_warn_delta = 30 seconds;
992 ts_max_delta = 5 minutes;
993
994 /*
995 * kline_with_reason: show the user the reason why they are k/d/glined
996 * on exit. May give away who set k/dline when set via tcm.
997 */
998 kline_with_reason = yes;
999
1000 /*
1001 * kline_reason: show this message to users on channel
1002 * instead of the oper reason.
1003 */
1004 kline_reason = "Connection closed";
1005
1006 /*
1007 * reject_hold_time: wait this amount of time before disconnecting
1008 * a rejected client. Use 0 to disable.
1009 */
1010 reject_hold_time = 0;
1011
1012 /*
1013 * warn_no_nline: warn opers about servers that try to connect but
1014 * we don't have a connect {} block for. Twits with misconfigured
1015 * servers can get really annoying with this enabled.
1016 */
1017 warn_no_nline = yes;
1018
1019 /*
1020 * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1021 * operators and administrators. Doing so is a good idea in case
1022 * there are any exempted (exempt{}) server IPs you don't want to
1023 * see leaked.
1024 */
1025 stats_e_disabled = no;
1026
1027 /* stats_o_oper only: make stats o (opers) oper only */
1028 stats_o_oper_only = yes;
1029
1030 /* stats_P_oper_only: make stats P (ports) oper only */
1031 stats_P_oper_only = yes;
1032
1033 /*
1034 * stats i oper only: make stats i (auth {}) oper only. set to:
1035 * yes: show users no auth blocks, made oper only.
1036 * masked: show users first matching auth block
1037 * no: show users all auth blocks.
1038 */
1039 stats_i_oper_only = yes;
1040
1041 /*
1042 * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1043 * yes: show users no auth blocks, made oper only
1044 * masked: show users first matching auth block
1045 * no: show users all auth blocks.
1046 */
1047 stats_k_oper_only = yes;
1048
1049 /*
1050 * caller_id_wait: time between notifying a +g user that somebody
1051 * is messaging them.
1052 */
1053 caller_id_wait = 1 minute;
1054
1055 /*
1056 * opers_bypass_callerid: allows operators to bypass +g and message
1057 * anyone who has it set (useful if you use services).
1058 */
1059 opers_bypass_callerid = no;
1060
1061 /*
1062 * pace_wait_simple: time between use of less intensive commands
1063 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1064 */
1065 pace_wait_simple = 1 second;
1066
1067 /*
1068 * pace_wait: time between more intensive commands
1069 * (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1070 */
1071 pace_wait = 10 seconds;
1072
1073 /*
1074 * short_motd: send clients a notice telling them to read the motd
1075 * instead of forcing a motd to clients who may simply ignore it.
1076 */
1077 short_motd = no;
1078
1079 /*
1080 * ping_cookie: require clients to respond exactly to a ping command,
1081 * can help block certain types of drones and FTP PASV mode spoofing.
1082 */
1083 ping_cookie = no;
1084
1085 /* no_oper_flood: increase flood limits for opers. */
1086 no_oper_flood = yes;
1087
1088 /*
1089 * true_no_oper_flood: completely eliminate flood limits for opers
1090 * and for clients with can_flood = yes in their auth {} blocks
1091 */
1092 true_no_oper_flood = yes;
1093
1094 /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1095 oper_pass_resv = yes;
1096
1097 /* REMOVE ME. The following line checks you've been reading. */
1098 havent_read_conf = 1;
1099
1100 /*
1101 * max_targets: the maximum amount of targets in a single
1102 * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1103 */
1104 max_targets = 4;
1105
1106 /*
1107 * client_flood: maximum amount of data in a clients queue before
1108 * they are dropped for flooding.
1109 */
1110 client_flood = 2560 bytes;
1111
1112 /*
1113 * message_locale: the default message locale
1114 * Use "standard" for the compiled in defaults.
1115 * To install the translated messages, go into messages/ in the
1116 * source directory and run `make install'.
1117 */
1118 message_locale = "standard";
1119
1120 /*
1121 * usermodes configurable: a list of usermodes for the options below
1122 *
1123 * +b - bots - See bot and drone flooding notices
1124 * +c - cconn - Client connection/quit notices
1125 * +C - cconn_full - Client connection/quit notices full
1126 * +D - deaf - Don't receive channel messages
1127 * +d - debug - See debugging notices
1128 * +f - full - See I: line full notices
1129 * +G - softcallerid - Server Side Ignore for users not on your channels
1130 * +g - callerid - Server Side Ignore (for privmsgs etc)
1131 * +H - hidden - Hides operator status to other users
1132 * +i - invisible - Not shown in NAMES or WHO unless you share a
1133 * a channel
1134 * +j - rej - See rejected client notices
1135 * +k - skill - See server generated KILL messages
1136 * +l - locops - See LOCOPS messages
1137 * +n - nchange - See client nick changes
1138 * +s - servnotice - See general server notices
1139 * +u - unauth - See unauthorized client notices
1140 * +w - wallop - See server generated WALLOPS
1141 * +x - external - See remote server connection and split notices
1142 * +y - spy - See LINKS, STATS, TRACE notices etc.
1143 * +z - operwall - See oper generated WALLOPS
1144 */
1145
1146 /* oper_only_umodes: usermodes only opers may set */
1147 oper_only_umodes = bots, cconn, cconn_full, debug, full, hidden, skill,
1148 nchange, rej, spy, external, operwall,
1149 locops, unauth;
1150
1151 /* oper_umodes: default usermodes opers get when they /oper */
1152 oper_umodes = bots, locops, servnotice, operwall, wallop;
1153
1154 /*
1155 * use_egd: if your system does not have *random devices yet you
1156 * want to use OpenSSL and encrypted links, enable this. Beware -
1157 * EGD is *very* CPU intensive when gathering data for its pool
1158 */
1159 # use_egd = yes;
1160
1161 /*
1162 * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1163 * which automatically finds the path.
1164 */
1165 # egdpool_path = "/var/run/egd-pool";
1166
1167 /*
1168 * throttle_time: the minimum amount of time between connections from
1169 * the same ip. exempt {} blocks are excluded from this throttling.
1170 * Offers protection against flooders who reconnect quickly.
1171 * Set to 0 to disable.
1172 */
1173 throttle_time = 10;
1174 };
1175
1176 glines {
1177 /* enable: enable glines, network wide temp klines */
1178 enable = yes;
1179
1180 /*
1181 * duration: the amount of time a gline will remain on your
1182 * server before expiring
1183 */
1184 duration = 1 day;
1185
1186 /*
1187 * log: which types of rules you want to log when triggered
1188 * (choose reject or block)
1189 */
1190 log = reject, block;
1191
1192 /*
1193 * NOTE: gline ACLs can cause a desync of glines throughout the
1194 * network, meaning some servers may have a gline triggered, and
1195 * others may not. Also, you only need insert rules for glines
1196 * that you want to block and/or reject. If you want to accept and
1197 * propagate the gline, do NOT put a rule for it.
1198 */
1199
1200 /* user@host for rule to apply to */
1201 user = "god@I.still.hate.packets";
1202 /* server for rule to apply to */
1203 name = "hades.arpa";
1204
1205 /*
1206 * action: action to take when a matching gline is found. options are:
1207 * reject - do not apply the gline locally
1208 * block - do not propagate the gline
1209 */
1210 action = reject, block;
1211
1212 user = "god@*";
1213 name = "*";
1214 action = block;
1215 };
1216
1217 modules {
1218 /*
1219 * path: other paths to search for modules specified below
1220 * and in /modload.
1221 */
1222 path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1223 path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1224
1225 /* module: the name of a module to load on startup/rehash */
1226 #module = "some_module.la";
1227 };
1228
1229 /*
1230 * log {}: contains information about logfiles.
1231 */
1232 log {
1233 /* Do you want to enable logging to ircd.log? */
1234 use_logging = yes;
1235 timestamp = yes;
1236
1237 file {
1238 type = oper;
1239 name = "/home/ircd/var/log/oper.log";
1240 size = unlimited;
1241 };
1242
1243 file {
1244 type = user;
1245 name = "/home/ircd/var/log/user.log";
1246 size = 50 megabytes;
1247 };
1248
1249 file {
1250 type = kill;
1251 name = "/home/ircd/var/log/kill.log";
1252 size = 50 megabytes;
1253 };
1254
1255 file {
1256 type = kline;
1257 name = "/home/ircd/var/log/kline.log";
1258 size = 50 megabytes;
1259 };
1260
1261 file {
1262 type = dline;
1263 name = "/home/ircd/var/log/dline.log";
1264 size = 50 megabytes;
1265 };
1266
1267 file {
1268 type = gline;
1269 name = "/home/ircd/var/log/gline.log";
1270 size = 50 megabytes;
1271 };
1272
1273 file {
1274 type = debug;
1275 name = "/home/ircd/var/log/debug.log";
1276 size = 50 megabytes;
1277 };
1278 };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28