| 1 |
-- Noteworthy changes in version 8.2.38 (2021-??-??) |
| 2 |
* Backwards compatibility mode for ircd-hybrid 8.2.22 and below has been removed |
| 3 |
* Minimum supported version of the Anope IRC services is now 2.0.8 |
| 4 |
|
| 5 |
|
| 6 |
-- Noteworthy changes in version 8.2.37 (2020-12-26) |
| 7 |
* Implemented IRCv3 `CAP 302` |
| 8 |
* Implemented IRCv3 `cap-notify` capability |
| 9 |
* In case a client sends multiple `PASS` messages, ircd only accepts the password |
| 10 |
sent in the first `PASS` message instead of the last one |
| 11 |
* Missing help file for `MONITOR` has been added |
| 12 |
* Fixed slightly off memory count for motds in `STATS z` |
| 13 |
* For a full list of all changes in this release, see <https://git.io/JLMnk> |
| 14 |
|
| 15 |
|
| 16 |
-- Noteworthy changes in version 8.2.36 (2020-12-04) |
| 17 |
* The old WATCH implementation has been replaced with IRCv3.2 MONITOR. For this, |
| 18 |
the `general::max_watch` configuration directive has been renamed to |
| 19 |
`general::max_monitor`. |
| 20 |
* User mode `B` has been implemented. Clients with that mode set are marked as a |
| 21 |
bot in both `WHOIS` and `WHO`. This mode can only be set by IRC operators (as |
| 22 |
long as the `bot` directive is set in `general::oper_only_umodes`), servers, |
| 23 |
and services. |
| 24 |
This mode can for example be used to mark HOPM as official network bot. |
| 25 |
* For a full list of all changes in this release, see <https://git.io/JLMnJ> |
| 26 |
|
| 27 |
|
| 28 |
-- Noteworthy changes in version 8.2.35 (2020-11-14) |
| 29 |
* Fixed issue where servers could propagate truncated ban masks during net-join |
| 30 |
* For a full list of all changes in this release, see <https://git.io/JIUa6> |
| 31 |
|
| 32 |
|
| 33 |
-- Noteworthy changes in version 8.2.34 (2020-11-01) |
| 34 |
* Re-implement backwards compatibility mode for old ircd-hybrid 8.2.23 and below. |
| 35 |
Final removal is scheduled for early 2021. |
| 36 |
* For consistency, the `general::network_desc` configuration directive has been |
| 37 |
renamed to `general::network_description` |
| 38 |
* Server notices that previously have been sent to user modes +f and +u are now |
| 39 |
sent to user mode +j (reject notices) instead. Due to this change, `unauth` and |
| 40 |
`full` have been removed from `general::oper_only_umodes`, `general::oper_umodes`, |
| 41 |
and `operator::umodes`. |
| 42 |
* User mode +b (bots) has been replaced with +f (flood). Spam/flood notices are now |
| 43 |
sent to this user mode. For this, `bots` has been removed from |
| 44 |
`general::oper_only_umodes`, `general::oper_umodes`, and `operator::umodes`. |
| 45 |
`flood` has been added instead to these configuration directives. |
| 46 |
* Stricten server/user ID validation. IDs have to be all uppercase everywhere now. |
| 47 |
* For a full list of all changes in this release, see <https://git.io/JkeID> |
| 48 |
|
| 49 |
|
| 50 |
-- Noteworthy changes in version 8.2.33 (2020-09-07) |
| 51 |
* Added `client` option to `listener::flags` |
| 52 |
* Added `defer` option to `listener::flags` |
| 53 |
* IRC operators may now use CIDR notation in `WHO` |
| 54 |
* For a full list of all changes in this release, see <https://git.io/JTftW> |
| 55 |
|
| 56 |
|
| 57 |
-- Noteworthy changes in version 8.2.32 (2020-08-16) |
| 58 |
* `RESV` couldn't be issued in case no reason has been supplied. This has been fixed. |
| 59 |
* Fixed possible `RPL_WHOISCHANNELS` line truncation of remote replies |
| 60 |
* Extban $t of type `matching` has been implemented. This extban allows matching |
| 61 |
based on TLS protocol version and/or cipher suite |
| 62 |
* Implemented channel mode `K`. `KNOCK` cannot be used on channels with that mode set |
| 63 |
* `STATS ?` is now oper-only |
| 64 |
* For a full list of all changes in this release, see <https://git.io/JUZa1> |
| 65 |
|
| 66 |
|
| 67 |
-- Noteworthy changes in version 8.2.31 (2020-05-03) |
| 68 |
* macOS compatibility fixes |
| 69 |
* Removed `spoof_notice` from `auth::flags`. With vhosts now this notice doesn't make |
| 70 |
much sense anymore |
| 71 |
* Fixed issue where ban masks might become malformed if set by remote clients/servers |
| 72 |
* Fixed issue with channel mode +c where high ascii characters can be erroneously |
| 73 |
detected as control characters |
| 74 |
* For a full list of all changes in this release, see <https://git.io/JUZa6> |
| 75 |
|
| 76 |
|
| 77 |
-- Noteworthy changes in version 8.2.30 (2020-03-01) |
| 78 |
* `QUOTE HELP extban` didn't work because the extban help file hasn't been |
| 79 |
installed properly during `make install` |
| 80 |
* Fixed broken libcrypto detection which caused the ircd not to work with |
| 81 |
OpenSSL under certain circumstances |
| 82 |
* Extban $n of type `acting` has been implemented. This extban prevents |
| 83 |
matching users from changing their nick while in the channel. Users |
| 84 |
with voice or above are not affected. |
| 85 |
* Channel mode +N has been changed so channel members with +v can change |
| 86 |
their nick name as well |
| 87 |
* For a full list of all changes in this release, see <https://git.io/JfOyF> |
| 88 |
|
| 89 |
|
| 90 |
-- Noteworthy changes in version 8.2.29 (2020-02-19) |
| 91 |
* Extbans have been implemented. Currently supported extbans: |
| 92 |
|
| 93 |
Matching: |
| 94 |
|
| 95 |
* `$a:<account>` Matches users logged into a matching account. |
| 96 |
* `$c:<channel>` Matches users that are on the given channel. An additional |
| 97 |
prefix of either @, %, or + can be specified to test for |
| 98 |
certain channel privileges. |
| 99 |
* `$o:<class>` Matches IRC operators that have joined a class |
| 100 |
matching the mask. |
| 101 |
* `$r:<realname>` Matches users with a matching realname. |
| 102 |
* `$s:<server>` Matches users that are connected to a server matching the mask. |
| 103 |
* `$u:<modes>` Matches users having the specified user modes set or not set. |
| 104 |
* `$z:<certfp>` Matches users having the given TLS certificate fingerprint. |
| 105 |
|
| 106 |
Acting: |
| 107 |
|
| 108 |
* `$j:<banmask>` Prevents matching users from joining the channel. |
| 109 |
* `$m:<banmask>` Blocks messages from matching users. Users with voice |
| 110 |
or above are not affected. |
| 111 |
|
| 112 |
For more details, see `help/extban`. |
| 113 |
* Added `channel::enable_extbans` configuration option. See `doc/reference.conf` |
| 114 |
for more information. |
| 115 |
* For a full list of all changes in this release, see <https://git.io/JvgAL> |
| 116 |
|
| 117 |
|
| 118 |
-- Noteworthy changes in version 8.2.28 (2020-01-26) |
| 119 |
* Fixed issue with topics set by `TBURST` not being propagated properly to clients |
| 120 |
* Allow IRC operators to search for real hosts in `WHO` |
| 121 |
* Ban/exempt/invex masks are now also tested against realhosts to prevent clients |
| 122 |
from bypassing channel bans by activating a fakehost |
| 123 |
* For a full list of all changes in this release, see <https://git.io/Jv37M> |
| 124 |
|
| 125 |
|
| 126 |
-- Noteworthy changes in version 8.2.27 (2020-01-22) |
| 127 |
* Experimental support for wolfSSL has been implemented. Minimum supported version is 4.3.0 |
| 128 |
* The `--enable-openssl`, `--enable-gnutls` switches, and their disabling counterparts |
| 129 |
`--disable-openssl` and `--disable-gnutls`, have been replaced with the `--with-tls` |
| 130 |
switch which takes one of the following options: `openssl`, `wolfssl`, `gnutls`, |
| 131 |
and `none`. |
| 132 |
If nothing has been specified, configure tries to autodetect in the following order: |
| 133 |
OpenSSL/LibreSSL -> GnuTLS -> wolfSSL. |
| 134 |
* Fixed segfault with GnuTLS/libgmp in case there's no DH parameters file |
| 135 |
defined in `serverinfo::ssl_dh_param_file` or if that file is missing |
| 136 |
* The connection timeout for connect{} blocks can now be configured via |
| 137 |
the `connect::timeout` configuration directive |
| 138 |
* Minimum supported OpenSSL version is 1.1.1 now |
| 139 |
* Minimum supported GnuTLS version is 3.6.5 now |
| 140 |
* Supported TLSv1.3 cipher suites can now be configured explicitely via the |
| 141 |
new `serverinfo::tls_cipher_suites` configuration directive |
| 142 |
* In the serverinfo {} block, the following configuration directives have been renamed: |
| 143 |
`ssl_certificate_file` -> `tls_certificate_file` |
| 144 |
`ssl_dh_param_file` -> `tls_dh_param_file` |
| 145 |
`ssl_dh_elliptic_curve` -> `tls_supported_groups` |
| 146 |
`ssl_cipher_list` -> `tls_cipher_list` |
| 147 |
`ssl_message_digest_algorithm` -> `tls_message_digest_algorithm` |
| 148 |
* In the operator {} block, the following configuration directives have been renamed: |
| 149 |
`ssl_certificate_fingerprint -> `tls_certificate_fingerprint` |
| 150 |
`ssl_connection_required -> `tls_connection_required` |
| 151 |
* In the connect {} block, the following configuration directives have been renamed: |
| 152 |
`ssl_cipher_list -> `tls_cipher_list` |
| 153 |
`ssl_certificate_fingerprint -> `tls_certificate_fingerprint` |
| 154 |
* For a full list of all changes in this release, see <https://git.io/Jvq9g> |
| 155 |
|
| 156 |
|
| 157 |
-- Noteworthy changes in version 8.2.26 (2019-05-31) |
| 158 |
* The `general::tkline_expire_notices` configuration directive has been |
| 159 |
replaced with user mode `X`. *LINE expiration notices are sent to IRC |
| 160 |
operators with that mode set |
| 161 |
* Fixed issue with `/rehash conf` creating duplicated class entries |
| 162 |
instead of updating existing ones that are already in use |
| 163 |
* For a full list of all changes in this release, see <https://git.io/fjEbq> |
| 164 |
|
| 165 |
|
| 166 |
-- Noteworthy changes in version 8.2.25 (2019-04-24) |
| 167 |
* The `class::number_per_ip`, `class::max_local` and `class::max_global` |
| 168 |
configuration directives have been replaced with just `class::number_per_ip_local` |
| 169 |
and `class::number_per_ip_global`. The `class::max_local` basically was |
| 170 |
redundant as it had the same functionality as `class::number_per_ip` |
| 171 |
* Adding RESVs with wildcards no longer requires administrator privileges |
| 172 |
* The `general::ignore_bogus_ts` configuration option has been deprecated |
| 173 |
* TLSv1.1 and TLSv1.0 are no longer supported and have been disabled in |
| 174 |
the OpenSSL and GnuTLS module |
| 175 |
* Minimum supported OpenSSL version is 1.0.1f now |
| 176 |
* Minimum supported GnuTLS version is 3.5.8 now |
| 177 |
* The `serverinfo::vhost` and `serverinfo:vhost6` configuration directives have |
| 178 |
been deprecated. If you need to bind() a specific address you can specify one |
| 179 |
in the connect {} block |
| 180 |
* The `connect::vhost` configuration directive has been renamed to `connect::bind` |
| 181 |
* For a full list of all changes in this release, see <https://git.io/fjRVk> |
| 182 |
|
| 183 |
|
| 184 |
-- Noteworthy changes in version 8.2.24 (2018-04-05) |
| 185 |
* Added `STATS s` to show configured pseudo {} blocks |
| 186 |
* Implemented channel mode `N` which prevents users from changing their |
| 187 |
nick while in a channel with that mode set |
| 188 |
* Services clients are now shown with `is a Network Service` in `WHOIS` |
| 189 |
* For a full list of all changes in this release, see <https://git.io/fjRVt> |
| 190 |
|
| 191 |
|
| 192 |
-- Noteworthy changes in version 8.2.23 (2018-03-26) |
| 193 |
* IRC operators are now able to see a user's resolved hostname in `WHOWAS`, |
| 194 |
and `WHOIS` even if the user has a fakehost/vhost |
| 195 |
* `RPL_WELCOME` now does use the rfc2812 style nick!user@host format |
| 196 |
* Removed rudimentary libgeoip support |
| 197 |
* Added `--enable-efence` switch to allow easy linking with the |
| 198 |
electric fence memory debugger library |
| 199 |
* `JOIN 0` is no longer supported |
| 200 |
* Fixed bug where ircd would not remove `RPL_WHOISOPERATOR` based svstags |
| 201 |
when deoppering |
| 202 |
* Fixed `unknown closes` statistic in `STATS t` showing invalid values sometimes |
| 203 |
* For a full list of all changes in this release, see <https://git.io/fjRVq> |
| 204 |
|
| 205 |
|
| 206 |
-- Noteworthy changes in version 8.2.22 (2017-03-26) |
| 207 |
* Implemented channel mode `L`. Channels with that mode set can make use of an |
| 208 |
extended ban list size specified with the new `channel::max_bans_large` |
| 209 |
configuraton option. This mode can be set only by IRC operators or servers. |
| 210 |
* Implemented channel mode `u` which hides bmask (+b/+e/+I) lists and mode changes |
| 211 |
to non-chanops everywhere |
| 212 |
* Fixed an issue with `TRACE` where remote servers would reply with `RPL_TRACEUSER` |
| 213 |
numerics containing UIDs |
| 214 |
* `STATS z` now shows simple memory stats of servers linked to the network |
| 215 |
* Added support for remote `ETRACE` |
| 216 |
* For a full list of all changes in this release, see <https://git.io/fjRVO> |
| 217 |
|
| 218 |
|
| 219 |
-- Noteworthy changes in version 8.2.21 (2016-11-27) |
| 220 |
* The `general::default_floodtime` configuration option has been added |
| 221 |
along with the `SET FLOODTIME` command. These allow to fine-tune the |
| 222 |
message throttling better |
| 223 |
* Fixed an issue with `INVITE` not showing the list of channels the |
| 224 |
sender is invited to |
| 225 |
* For a full list of all changes in this release, see <https://git.io/fjRVG> |
| 226 |
|
| 227 |
|
| 228 |
-- Noteworthy changes in version 8.2.20 (2016-11-05) |
| 229 |
* `INFO` now shows GnuTLS/OpenSSL library/header versions |
| 230 |
* Added `channel::max_invites` configuration option. See `doc/reference.conf` |
| 231 |
for more information. |
| 232 |
* `INVITE` expirations have been implemented. Expire time can be adjusted with |
| 233 |
the `channel::invite_expire_time` configuration directive |
| 234 |
* `WHOIS` notices to IRC operators have been re-added. User mode +y is required |
| 235 |
to see them |
| 236 |
* The maximum line length for motd files has been increased to 320 bytes to |
| 237 |
support multibyte encodings better |
| 238 |
* For a full list of all changes in this release, see <https://git.io/fjRVZ> |
| 239 |
|
| 240 |
|
| 241 |
-- Noteworthy changes in version 8.2.19 (2016-08-21) |
| 242 |
* Fixed a possible server name leak in `WHO` with server hiding enabled |
| 243 |
* `WHO` now allows IRC operators to search by IP address |
| 244 |
* Admins no longer can see IP addresses in `STATS P` with |
| 245 |
`serverhide::hide_server_ips` enabled |
| 246 |
* User mode `n` now shows nick name changes from remote clients, too |
| 247 |
* For a full list of all changes in this release, see <https://git.io/fjRVC> |
| 248 |
|
| 249 |
|
| 250 |
-- Noteworthy changes in version 8.2.18 (2016-06-22) |
| 251 |
* Fixed an assert when a client sends invalid `LIST` options |
| 252 |
* Fixed invalid memory stats of channel invites in `STATS z` |
| 253 |
* For a full list of all changes in this release, see <https://git.io/fjRSx> |
| 254 |
|
| 255 |
|
| 256 |
-- Noteworthy changes in version 8.2.17 (2016-04-21) |
| 257 |
* Fixed core on `REHASH CONF` with `general::whowas_history_length` |
| 258 |
set to 0 |
| 259 |
* Fixed possible core on `INVITE` with `channel::max_channels` set to 0 |
| 260 |
* For a full list of all changes in this release, see <https://git.io/fjRSp> |
| 261 |
|
| 262 |
|
| 263 |
-- Noteworthy changes in version 8.2.16 (2016-03-20) |
| 264 |
* Added `general::whowas_history_length` configuration option which |
| 265 |
allows to define the maximum length of the `WHOWAS` nickname history |
| 266 |
* Services are now allowed to override `general::min_nonwildcard`, |
| 267 |
and `general::min_nonwildcard_simple` settings |
| 268 |
* Minor updates to help files |
| 269 |
* For a full list of all changes in this release, see <https://git.io/fjRSj> |
| 270 |
|
| 271 |
|
| 272 |
-- Noteworthy changes in version 8.2.15 (2016-02-24) |
| 273 |
* Added proper support for Raspbian/ARM. Gracias to Beave/2600.net |
| 274 |
for providing a box for testing purposes. |
| 275 |
* Fixed an assert with empty `user = ""` directives in auth {} blocks |
| 276 |
* `STATS z` now shows allocated listeners |
| 277 |
* Fixed bug where `can_flood` auth {} flags did not work on channels |
| 278 |
* For a full list of all changes in this release, see <https://git.io/fjR9v> |
| 279 |
|
| 280 |
|
| 281 |
-- Noteworthy changes in version 8.2.14 (2016-02-09) |
| 282 |
* Fixed server clustering |
| 283 |
* Major cleanups to the configuration subsystem |
| 284 |
* Improvements to libGeoIP support: |
| 285 |
- Works now with IPv6 addresses |
| 286 |
- Added `libgeoip_database_options`, `libgeoip_ipv4_database_file`, |
| 287 |
and `libgeoip_ipv6_database_file` configuration directives to the |
| 288 |
serverinfo {} block |
| 289 |
* Further improvements to GnuTLS support |
| 290 |
* For a full list of all changes in this release, see <https://git.io/fjR9f> |
| 291 |
|
| 292 |
|
| 293 |
-- Noteworthy changes in version 8.2.13 (2016-02-02) |
| 294 |
* Implemented support for GnuTLS. Currently ./configure's autodetection |
| 295 |
intentionally prefers OpenSSL over GnuTLS, so OpenSSL detection needs |
| 296 |
to be disabled explicitely by using the `--disable-openssl` switch. |
| 297 |
* Minimum supported GnuTLS version is 3.3.8 now |
| 298 |
* Minimum supported OpenSSL version is 1.0.1d now |
| 299 |
* Added support for remote `REHASH`: `REHASH <server> <option>` |
| 300 |
* Added `rehash:remote` IRC operator privilege flag |
| 301 |
* Added `rehash` type to shared {} blocks |
| 302 |
* Fixed minor memory leak with shared {} and cluster {} blocks |
| 303 |
* For a full list of all changes in this release, see <https://git.io/fjR9J> |
| 304 |
|
| 305 |
|
| 306 |
-- Noteworthy changes in version 8.2.12 (2016-01-05) |
| 307 |
* **IMPORTANT:** Character case mapping is `ascii` now. It is recommended |
| 308 |
to update all servers on the network to prevent possible channel |
| 309 |
desynchronizations and nick name collision kills |
| 310 |
* Added channel mode `T` which forbids `NOTICE` to be sent to a channel |
| 311 |
* Fixed minor `SVSTAG` memory leak |
| 312 |
* Fixed broken `PART` message blocking mechanism |
| 313 |
* ircd now makes use of up to 8 name servers that are specified in |
| 314 |
`/etc/resolv.conf` |
| 315 |
* The `-klinefile`, `-dlinefile`, etc. switches didn't work at all |
| 316 |
* Fixed possible core on ident lookups if ircd is out of file descriptors |
| 317 |
* Far client exit notices (+F) now show IP addresses, too |
| 318 |
* Made idle time look nicer in `STATS v|p` by using a formatted time string |
| 319 |
* `general::ts_warn_delta`, and `general::ts_max_delta` can be set to 0 now |
| 320 |
* For a full list of all changes in this release, see <https://git.io/JvLtj> |
| 321 |
|
| 322 |
|
| 323 |
-- Noteworthy changes in version 8.2.11 (2015-11-19) |
| 324 |
* Implemented IRCv3.2 `invite-notify` extension |
| 325 |
* Implemented IRCv3.2 `chghost` extension |
| 326 |
* Added `channel::invite_delay_channel` configuration option |
| 327 |
* For a full list of all changes in this release, see <https://git.io/JvLqe> |
| 328 |
|
| 329 |
|
| 330 |
-- Noteworthy changes in version 8.2.10 (2015-11-06) |
| 331 |
* **IMPORTANT:** renamed `serverhide::links_delay` configuration directive |
| 332 |
to `serverhide::flatten_links_delay` |
| 333 |
* Added `serverhide::flatten_links_file` configuration option |
| 334 |
* Fixed bug where changing `serverhide::flatten_links_delay` on runtime |
| 335 |
would not have any effect |
| 336 |
* mkpasswd (tools): fixed broken bcrypt support on *BSD in conjunction with |
| 337 |
the `-s` and `-l` switches. Dropped MD5, DES and Extended DES support. |
| 338 |
* Removed `CHALLENGE` in favor of ssl certificate fingerprint enabled |
| 339 |
operator {} blocks |
| 340 |
* RSA keys with less than 2048 bits are no longer supported; same applies |
| 341 |
to the DH param file |
| 342 |
* Added missing IRC operator privilege flags to `STATS o`. For a full list |
| 343 |
of flags see `doc/reference.conf` |
| 344 |
* For a full list of all changes in this release, see <https://git.io/JvLqJ> |
| 345 |
|
| 346 |
|
| 347 |
-- Noteworthy changes in version 8.2.9 (2015-09-13) |
| 348 |
* **IMPORTANT:** database files and links.txt are now stored in `/var/lib` |
| 349 |
instead of `/etc`, so make sure to move your k/d/x-line database files |
| 350 |
to the new path before (re)starting the ircd |
| 351 |
* **IMPORTANT:** the splitmode logic has been removed along with the |
| 352 |
following channel {} block configuration directives: |
| 353 |
`default_split_user_count`, `default_split_server_count`, |
| 354 |
`no_create_on_split`, `no_join_on_split` |
| 355 |
* Added `xline_exempt` to auth {} block flags |
| 356 |
* `serverinfo::sid` is now optional. A unique SID is now automatically |
| 357 |
generated based on the server's name and description |
| 358 |
* Various fixes to the mkpasswd tool |
| 359 |
* If supported by the compiler, ircd-hybrid now compiles with |
| 360 |
`-fstack-protector-strong` instead of `-fstack-protector` |
| 361 |
* Services can now add RESVs (SQLINEs) that have wildcards in it |
| 362 |
* Channel name RESVs are now sanity checked for too broad masks |
| 363 |
* `class::connectfreq` now works properly with values lower than 300 seconds |
| 364 |
* Implemented IRCv3.1 `account-notify` extension |
| 365 |
* The `general::oper_pass_resv` configuration directive has been deprecated |
| 366 |
in favor of the new `join:resv`, and `nick:resv` IRC operator flags. |
| 367 |
See `doc/reference.conf` for more information. |
| 368 |
* Added `resv`, and `unresv` IRC operator flags. Previously, all |
| 369 |
IRC operators were allowed to `RESV` and `UNRESV`, regardless of configured |
| 370 |
privileges. |
| 371 |
* Added `close` to IRC operator flags |
| 372 |
* ircd is using ISO 8601 date and time notation in most places now |
| 373 |
* For a full list of all changes in this release, see <https://git.io/JvLqI> |
| 374 |
|
| 375 |
|
| 376 |
-- Noteworthy changes in version 8.2.8 (2015-05-10) |
| 377 |
* ircd now rejects remote k-line requests for user@host mask that don't |
| 378 |
have at least `general::min_nonwildcard` non-wildcard characters in it |
| 379 |
* Configuration related server notices are now sent to admins only as |
| 380 |
they potentially could leak passwords and other sensitive data to IRC |
| 381 |
operators that don't have administrator privileges |
| 382 |
* The `GLINE`/`GUNGLINE` commands have been removed. `KLINE` in conjunction |
| 383 |
with cluster {} and/or shared {} blocks is now the recommended |
| 384 |
way to add global user@host mask based server bans |
| 385 |
* Added `dline_min_cidr`, `dline_min_cidr6`, `kline_min_cidr`, and |
| 386 |
`kline_min_cidr6` configuration options to the general {} block |
| 387 |
* Fixed bug where a `REHASH` would clear all X-Lines and RESVs that have |
| 388 |
been set with the `XLINE`/`RESV commands` |
| 389 |
* Fixed broken temporary remote XLINEs |
| 390 |
* The `general::havent_read_conf` configuration directive has been removed |
| 391 |
* For a full list of all changes in this release, see <https://git.io/JvLqq> |
| 392 |
|
| 393 |
|
| 394 |
-- Noteworthy changes in version 8.2.7 (2015-04-05) |
| 395 |
* Fixed a potential buffer overflow with the `BMASK` inter-server command |
| 396 |
* Fixed undefined behavior in the `HELP` command module which could |
| 397 |
lead to stack corruption |
| 398 |
* Removed useless help files for inter-server commands |
| 399 |
* For a full list of all changes in this release, see <https://git.io/JfOyA> |
| 400 |
|
| 401 |
|
| 402 |
-- Noteworthy changes in version 8.2.6 (2015-03-29) |
| 403 |
* `INFO` now shows configured values of `max_watch` and `stats_m_oper_only` |
| 404 |
* `WHOWAS` now shows IP addresses to IRC operators |
| 405 |
* Fixed bug that would allow remote clients to bypass the hard |
| 406 |
limit of max `WHOWAS` entries to be returned |
| 407 |
* For a full list of all changes in this release, see <https://git.io/JTTuf> |
| 408 |
|
| 409 |
|
| 410 |
-- Noteworthy changes in version 8.2.5 (2015-02-24) |
| 411 |
* Fixed core on Mac OSX 10.10 and possibly some other systems when parsing |
| 412 |
the `ircd.conf` with configured pseudo {} blocks |
| 413 |
* For a full list of all changes in this release, see <https://git.io/JTTuI> |
| 414 |
|
| 415 |
|
| 416 |
-- Noteworthy changes in version 8.2.4 (2015-02-17) |
| 417 |
* Added `SVSTAG` command which services may use to add tags to users which can |
| 418 |
be seen in `WHOIS` |
| 419 |
* Added `oper::whois` configuration option which allows to override the default |
| 420 |
`RPL_WHOISOPERATOR` numeric string shown in `WHOIS` |
| 421 |
* IRC operators may now use +O on a channel even if they are only a half-op |
| 422 |
* Fixed bug where `TOPIC` messages were not n!u@h prefixed in case of `TBURST` |
| 423 |
issued by services clients |
| 424 |
* For a full list of all changes in this release, see <https://git.io/JTTut> |
| 425 |
|
| 426 |
|
| 427 |
-- Noteworthy changes in version 8.2.3 (2015-02-11) |
| 428 |
* **IMPORTANT:** the following configuration directives have been renamed: |
| 429 |
`max_clients` -> `default_max_clients` |
| 430 |
`join_flood_count` -> `default_join_flood_count` |
| 431 |
`join_flood_time` -> `default_join_flood_time` |
| 432 |
* Fixed bug where `REHASH` would always reset the `MAX`, `JFLOODTIME`, and |
| 433 |
`JFLOODCOUNT` values that have been changed from within IRC via the `SET` |
| 434 |
command |
| 435 |
* Added channel mode `C` which prevents users from sending CTCPs to a channel |
| 436 |
* Fixes to the `NOTICE`/`PRIVMSG` anti-flood logic |
| 437 |
* Allow to disable the `NOTICE`/`PRIVMSG` anti-flood mechanism by setting the |
| 438 |
`general::default_floodcount` configuration option to 0 |
| 439 |
* Updated some help files |
| 440 |
* IRC operators may now see certificate fingerprints, user modes and hidden |
| 441 |
channels via `WHOIS` as well. This used to be admin only. |
| 442 |
* For a full list of all changes in this release, see <https://git.io/JTQP3> |
| 443 |
|
| 444 |
|
| 445 |
-- Noteworthy changes in version 8.2.2 (2015-01-20) |
| 446 |
* Implemented IRCv3.1 `extended-join` extension |
| 447 |
* Channel half-ops can now use `INVITE` as well |
| 448 |
* Fixed broken `make install -jX` |
| 449 |
* `m_opme.c` has been added to `modules/extra`. Can be used on opless channels only. |
| 450 |
* Added `opme` to IRC operator flags |
| 451 |
* Updated several help files |
| 452 |
* The `general::hide_spoof_ips` configuration option has been deprecated |
| 453 |
* The `general::true_no_oper_flood` configuration option has been deprecated. |
| 454 |
IRC operators still can have higher `flood` limits with `no_oper_flood = yes;` |
| 455 |
hoewever, they are no longer allowed to bypass RecvQ limits. |
| 456 |
* Added `general::stats_m_oper_only` configuration option |
| 457 |
* Remote client connection notices (user mode +F) now do show IP addresses, too |
| 458 |
* For a full list of all changes in this release, see <https://git.io/JTQPG> |
| 459 |
|
| 460 |
|
| 461 |
-- Noteworthy changes in version 8.2.1 (2014-10-21) |
| 462 |
* Fixed bug where `UNDLINE remote.server IP` did not work as expected |
| 463 |
* Servers are now allowed to add/remove K-/D-/X-lines and RESVs |
| 464 |
* User mode +G now no longer allows to override +g |
| 465 |
* Due to potential weakness, TLS session caching and session tickets |
| 466 |
have been disabled |
| 467 |
* Minor improvements to TS6 implementation |
| 468 |
* `WHOWAS` now shows the name of the services account a user was logged in |
| 469 |
* For a full list of all changes in this release, see <https://git.io/JTQP8> |
| 470 |
|
| 471 |
|
| 472 |
-- Noteworthy changes in version 8.2.0 (2014-08-24) |
| 473 |
* Successful IRC operator logins are now announced globally via `GLOBOPS` |
| 474 |
* Cleanups and improvements to the resolver code |
| 475 |
* Cleanups and improvements to the poll() I/O event notification support |
| 476 |
* A topic mask can now be specified within the `LIST` options |
| 477 |
* All users may now see channel modes in the `LIST` reply |
| 478 |
* Fixed bug where `NOTICE +#somechan` did allow bypassing resv {} channels, |
| 479 |
or channels that are set +c (no control codes) |
| 480 |
* pseudo {} blocks also known as service aliases have been implemented. |
| 481 |
See `doc/reference.conf` for more information. |
| 482 |
* Removed `general::services_name` configuration option. This is now no |
| 483 |
longer needed. |
| 484 |
* For a full list of all changes in this release, see <https://git.io/JTQPR> |
| 485 |
|
| 486 |
|
| 487 |
-- Noteworthy changes in version 8.2.0rc2 (2014-08-03) |
| 488 |
* Improved AWAY throttling to allow for better fine-tuning. See the |
| 489 |
newly added `away_count` and `away_time` configuration directives |
| 490 |
in the general {} block |
| 491 |
* Support for the select() I/O event notification has been dropped |
| 492 |
* For a full list of all changes in this release, see <https://git.io/JkeIF> |
| 493 |
|
| 494 |
|
| 495 |
-- Noteworthy changes in version 8.2.0rc1 (2014-07-20) |
| 496 |
* Miscellaneous code cleanups and stabilization fixes |
| 497 |
* `./configure` now requires OpenSSL 0.9.8o or above in order |
| 498 |
to enable TLS/SSL support |
| 499 |
* For a full list of all changes in this release, see <https://git.io/JkeLI> |
| 500 |
|
| 501 |
|
| 502 |
-- Noteworthy changes in version 8.2.0beta4 (2014-07-06) |
| 503 |
* **IMPORTANT:** channel halfops are now an integral part of ircd-hybrid |
| 504 |
and can't be disabled anymore |
| 505 |
* Added flood control for the `INVITE` command. See channel {} block in `reference.conf` |
| 506 |
* Changed flood control logic for the `KNOCK` command. See channel {} block in `reference.conf` |
| 507 |
* `INVITE` without any parameters now shows a list of channels a client is invited to |
| 508 |
* The `OPERWALL` command has been removed. Use `GLOBOPS` instead |
| 509 |
* Added `max_channels` to class {} blocks |
| 510 |
* Added `throttle_count` configuration option to the general {} block |
| 511 |
* Added `ssl_message_digest_algorithm` configuration option to serverinfo {} block. |
| 512 |
See `doc/reference.conf` for more information. |
| 513 |
* Added support for Elliptic Curve Diffie-Hellman (ECDH). Also an elliptic curve can be |
| 514 |
specified via the `serverinfo::ssl_dh_elliptic_curve` configuration option. |
| 515 |
* Removed `ssl_server_method` and `ssl_client_method` configuration options. |
| 516 |
ircd now only allows TLSv1, TLSv1.1 and TLSv1.2 protocols depending |
| 517 |
on the OpenSSL version. SSLv3 is no longer supported. |
| 518 |
* For a full list of all changes in this release, see <https://git.io/JkeLO> |
| 519 |
|
| 520 |
|
| 521 |
-- Noteworthy changes in version 8.2.0beta3 (2014-05-26) |
| 522 |
* Code cleanups/performance improvements |
| 523 |
* For a full list of all changes in this release, see <https://git.io/JkeLW> |
| 524 |
|
| 525 |
|
| 526 |
-- Noteworthy changes in version 8.2.0beta2 (2014-05-15) |
| 527 |
* **IMPORTANT:** renamed `general::warn_no_nline` configuration directive to |
| 528 |
`general::warn_no_connect_block` |
| 529 |
* Fixed bug with `WHOIS` not showing a list of channel names as expected |
| 530 |
* Added user mode +q which hides idle and signon time in `WHOIS` |
| 531 |
* Added user mode +p which hides channel list in `WHOIS` |
| 532 |
* For a full list of all changes in this release, see <https://git.io/JkeLB> |
| 533 |
|
| 534 |
|
| 535 |
-- Noteworthy changes in version 8.2.0beta1 (2014-04-29) |
| 536 |
* TS6 is now mandatory. ircd is no longer backwards compatible with TS5 |
| 537 |
and below. |
| 538 |
* `SVSJOIN` and `SVSPART` commands have been added |
| 539 |
* Major code cleanups and refactoring. Improved overall performance |
| 540 |
* `INFO` now also reports `MPATH` (path to main motd (Message of the Day) file) |
| 541 |
and `SPATH` (Path to server executable) |
| 542 |
* Updated several help files |
| 543 |
|
| 544 |
|
| 545 |
-- Noteworthy changes in version 8.1.20 (2014-07-20) |
| 546 |
* Fixed `XLINE` not working as expected |
| 547 |
* Fixed build with LibreSSL which hasn't compression support |
| 548 |
* Miscellaneous stabilization and cosmetical fixes |
| 549 |
* EGD support has been dropped |
| 550 |
|
| 551 |
|
| 552 |
-- Noteworthy changes in version 8.1.19 (2014-07-05) |
| 553 |
* Fixed `EOB` logic for remote servers |
| 554 |
* Fixed bug where IRC operators that have the +g/+G/+R umodes set won't receive |
| 555 |
server notices for remote CONNECT/KLINE/DLINE/XLINE/RESV attempts |
| 556 |
* Sending messages to user@server to local targets is now no longer possible, |
| 557 |
as this was an easy way to bypass +R/+G/+g user modes. |
| 558 |
* Fixed splicode logic so `SPLITNUM` now works as expected |
| 559 |
* Fixed `UNDLINE` not to require the IP address to be prepended with *@ |
| 560 |
|
| 561 |
|
| 562 |
-- Noteworthy changes in version 8.1.18 (2014-06-09) |
| 563 |
* Fixed `CAP` issue for certain clients |
| 564 |
* Fixed bug where `STATS p` would show an invalid amount of IRC operators |
| 565 |
in case there are any +H opers |
| 566 |
* IRC operators may now no longer set a channel +O if they are only halfops (%) |
| 567 |
* Channel halfops (%) may now no longer (de)halfop other channel members |
| 568 |
* Channel halfops (%) may now no longer `KICK` other channel halfops |
| 569 |
* Fixed compile warnings; code cleanups |
| 570 |
* Fixed bug where the configuration parser wouldn't truncate the network name |
| 571 |
if `general::network_name` contains spaces |
| 572 |
|
| 573 |
|
| 574 |
-- Noteworthy changes in version 8.1.17 (2014-05-01) |
| 575 |
* Fixed possible `WATCH` core |
| 576 |
* Fixed bug where the configuration parser wouldn't take time units |
| 577 |
into consideration for the `join_flood_time` and `throttle_time` |
| 578 |
configuration options |
| 579 |
* Minor `LIST` optimization |
| 580 |
|
| 581 |
|
| 582 |
-- Noteworthy changes in version 8.1.16 (2014-04-20) |
| 583 |
* Fixed undefined behaviour with crypt() returning `NULL` |
| 584 |
since glibc2.17 in certain cases |
| 585 |
* Admins may now see all channel members via `WHO #channel` |
| 586 |
regardless of channel mode +s |
| 587 |
* Fixed corrupted `STATS U` output |
| 588 |
|
| 589 |
|
| 590 |
-- Noteworthy changes in version 8.1.15 (2014-03-29) |
| 591 |
* **IMPORTANT:** ircd binary is now again placed into `bin/` instead of `sbin/` |
| 592 |
* mkpasswd in tools/ now defaults to MD5 instead of DES |
| 593 |
* The `USERS` command has been removed |
| 594 |
* Fixed issue with `SVSNICK` where clients self-collided when changing |
| 595 |
just the case of the nick name, i.e. somenick -> SomeNicK |
| 596 |
|
| 597 |
|
| 598 |
-- Noteworthy changes in version 8.1.14 (2014-02-25) |
| 599 |
* WHOWAS now honors `serverhide::disable_remote_commands` |
| 600 |
* Improved TS6 inter-server communication |
| 601 |
* Added `unxline` IRC operator flag |
| 602 |
* Implemented IRCv3.2 `userhost-in-names` extension |
| 603 |
* ircd now allows private RSA keys larger than 2048 bits |
| 604 |
* Fixed bug where signals stopped from working after restarting |
| 605 |
the ircd via SIGINT |
| 606 |
* Fixed bug where certain irc clients could not reconnect via TLS/SSL |
| 607 |
* Fixed long-standing bug where +p channels have been shown |
| 608 |
in the `WHOIS` reply |
| 609 |
|
| 610 |
|
| 611 |
-- Noteworthy changes in version 8.1.13 (2014-01-07) |
| 612 |
* Fixed `EOB` not working for remote servers (resulted in fake direction notices) |
| 613 |
* Fixed remote client connection notices for servers that are |
| 614 |
more than one hop away |
| 615 |
* Fixed bug where the ircd didn't timeout SSL connections that |
| 616 |
haven't finished the SSL handshake |
| 617 |
* Fixed several bugs with server hiding |
| 618 |
* Updated/fixed help files |
| 619 |
* `WHOIS` no longer sends a notice to +y operators |
| 620 |
|
| 621 |
|
| 622 |
-- Noteworthy changes in version 8.1.12 (2013-12-22) |
| 623 |
* `RPL_WHOISMODES` now uses the 379 numeric |
| 624 |
* Serial number is now shown on start up |
| 625 |
* Fixed possible channel mode desynch with services |
| 626 |
* Fixed TS6 support with `LOCOPS` |
| 627 |
* Minor code cleanups |
| 628 |
* Fixed file descriptor leak with empty help files |
| 629 |
* Fixed issue with `WEBIRC` where hostnames were not validated |
| 630 |
|
| 631 |
|
| 632 |
-- Noteworthy changes in version 8.1.11 (2013-12-06) |
| 633 |
* Administrators may now see channel modes in `LIST` |
| 634 |
* Fixed compile error on BSD systems when building with kqueue() |
| 635 |
|
| 636 |
|
| 637 |
-- Noteworthy changes in version 8.1.10 (2013-11-25) |
| 638 |
* Fixed bug with kqueue() where it occasionally dropped updates |
| 639 |
* Changed `WHOIS` to show certificate fingerprint to administrators only |
| 640 |
* The `WHO` reply now shows if a nickname has been registered |
| 641 |
with NickServ. (`r` status flag) |
| 642 |
* Fixed some flaws with server hiding |
| 643 |
* Fixed bug where `STATS P` would leak ip addresses to remotely connected |
| 644 |
administrators, even if `serverhide::hide_server_ips` was set to `yes` |
| 645 |
* Added `SVSKILL` command |
| 646 |
|
| 647 |
|
| 648 |
-- Noteworthy changes in version 8.1.9 (2013-11-08) |
| 649 |
* Added user mode +W. Users connected via a webirc gateway get this |
| 650 |
mode set by servers. |
| 651 |
* `WHOIS` now shows if a client is connected via a webirc gateway |
| 652 |
* Administrators may now see +s channels a user is in with `WHOIS`. |
| 653 |
Secret channels are prepended with a tilde in the `WHOIS` reply. |
| 654 |
* Administrators are now able to see all the user modes a user has |
| 655 |
set via `WHOIS` |
| 656 |
|
| 657 |
|
| 658 |
-- Noteworthy changes in version 8.1.8 (2013-10-25) |
| 659 |
* Fixed bug that could lead to a desynchronized nick database |
| 660 |
throughout the entire network if using services enforced |
| 661 |
nick names (`SVSNICK`) |
| 662 |
* Cleaned up/modernized build system |
| 663 |
* Add `-fstack-protector` to `CFLAGS` if available. Basically checks for |
| 664 |
buffer overflows/stack-smashing attacks |
| 665 |
* When using anope 1.9/2.0 services, `WHOIS` now shows the account name |
| 666 |
of a registered/identified client (numeric 330) |
| 667 |
* Administrators can now see +s channels in the `LIST` reply |
| 668 |
|
| 669 |
|
| 670 |
-- Noteworthy changes in version 8.1.7 (2013-08-18) |
| 671 |
* Fixed issue with channel mode +n having no functionality at all |
| 672 |
* Fixed SSL certificate fingerprint validation for outgoing server connects |
| 673 |
* Updated several documentation files |
| 674 |
|
| 675 |
|
| 676 |
-- Noteworthy changes in version 8.1.6 (2013-08-02) |
| 677 |
* Fixed possible core with empty motd files |
| 678 |
|
| 679 |
|
| 680 |
-- Noteworthy changes in version 8.1.5 (2013-07-16) |
| 681 |
* Fixed bug that would prevent servers from linking together |
| 682 |
if `connect::aftype` isn't set |
| 683 |
|
| 684 |
|
| 685 |
-- Noteworthy changes in version 8.1.4 (2013-07-05) |
| 686 |
* Added `xline` and `resv` logging types. See `doc/reference.conf` |
| 687 |
for more information |
| 688 |
* Fixed bug where remote `STATS` requests were not rate limited |
| 689 |
* Fixed core with empty `auth::spoof` entries |
| 690 |
* Increased oper/auth/connect password length limit from 20 to 128 |
| 691 |
* Minor fixes to nickflood control code |
| 692 |
|
| 693 |
|
| 694 |
-- Noteworthy changes in version 8.1.3 (2013-06-23) |
| 695 |
* Fixed possible core on `STATS z` |
| 696 |
* Revised `doc/reference.conf` |
| 697 |
* Fixed broken `--disable-libgeoip` switch |
| 698 |
|
| 699 |
|
| 700 |
-- Noteworthy changes in version 8.1.2 (2013-06-20) |
| 701 |
* Added `general::cycle_on_host_change` configuration option |
| 702 |
* Added `general::stats_u_oper_only` configuration option |
| 703 |
* Added support for SHA-256 ssl certificate fingerprint based operator {} |
| 704 |
and connect {} blocks. |
| 705 |
In conjunction with Anope 1.9/2.0 IRC-services, clients are now also able |
| 706 |
to automatically identify for their nick with ssl certificate |
| 707 |
fingerprints |
| 708 |
* Added `operator::ssl_connection_required` configuration option. See |
| 709 |
`doc/reference.conf` for more information |
| 710 |
* Added user mode +S (client is connected via SSL/TLS). Allows services |
| 711 |
to keep track of what users are connected via SSL, and allows to see |
| 712 |
ssl-status of remote clients in a `WHOIS` |
| 713 |
* Fixed a server name leak with server hiding enabled |
| 714 |
|
| 715 |
|
| 716 |
-- Noteworthy changes in version 8.1.1 (2013-06-06) |
| 717 |
* **IMPORTANT:** moved `disable_remote_command` configuration directive from |
| 718 |
general {} block to serverhide {} block |
| 719 |
* Minor code cleanups/performance improvements |
| 720 |
* Fixed bug where IRC operators could see `LOCOPS` messages even if they don't |
| 721 |
have the +l mode set |
| 722 |
* Fixed bug where non-SSL clients could join +S channels on non-SSL servers |
| 723 |
* Implemented motd {} configuration blocks. See `doc/reference.conf` for more |
| 724 |
information |
| 725 |
* `STATS T` shows configured MOTD files |
| 726 |
|
| 727 |
|
| 728 |
-- Noteworthy changes in version 8.1.0 (2013-05-23) |
| 729 |
* Minor code cleanups/performance improvements |
| 730 |
|
| 731 |
|
| 732 |
-- Noteworthy changes in version 8.1.0rc1 (2013-05-19) |
| 733 |
* Fixed broken spoofs |
| 734 |
|
| 735 |
|
| 736 |
-- Noteworthy changes in version 8.1.0beta5 (2013-05-15) |
| 737 |
* Removed `remote`, and `global_kill` oper flags, and added `connect`, |
| 738 |
`squit`, and `kill` flags for better fine-tuning instead. Whether or |
| 739 |
not a specific action is allowed on a remote server can be controlled |
| 740 |
by appending the `:remote` flag. For example: `kill` allows only local |
| 741 |
clients to be killed, whereas `kill:remote` allows to issue a `KILL` for |
| 742 |
remote clients |
| 743 |
* Added `locops` and `wallops` to IRC operator flags |
| 744 |
* Improve/cleanup `HELP` system |
| 745 |
|
| 746 |
|
| 747 |
-- Noteworthy changes in version 8.1.0beta4 (2013-05-09) |
| 748 |
* Implemented channel mode +M. Clients that haven't identified their |
| 749 |
name with NickServ may not speak in a channel that has this mode set |
| 750 |
* Fixed weird idletimes shown in `TRACE` |
| 751 |
* Added `nononreg` (+R) to `general::oper_umodes` |
| 752 |
* Added user mode +F (can see remote client connect/exit notices) |
| 753 |
|
| 754 |
|
| 755 |
-- Noteworthy changes in version 8.1.0beta3 (2013-05-05) |
| 756 |
* PCRE support has been dropped |
| 757 |
* `STATS o` now shows how many times an operator {} block has been used. |
| 758 |
Similar to `STATS x|q` |
| 759 |
* Implemented channel mode +c. Known from other ircds, this mode basically |
| 760 |
prevents users from sending messages including control codes to a channel |
| 761 |
that has this mode set |
| 762 |
* Fixed bug where bans were not checked against non-channel members when |
| 763 |
sending messages to a channel |
| 764 |
* Removed `channel::quiet_on_ban` configuration option. This feature is |
| 765 |
now enabled by default |
| 766 |
|
| 767 |
|
| 768 |
-- Noteworthy changes in version 8.1.0beta2 (2013-04-28) |
| 769 |
* Fixed broken compile with libGeoIP disabled |
| 770 |
* Code cleanups; working towards stabilization and improved performance |
| 771 |
* Removed oper flag `nick_changes`. IRC operators can now set +n at will |
| 772 |
* Fixed shared {} blocks not working as expected |
| 773 |
* Fixed spoofs not working as expected |
| 774 |
|
| 775 |
|
| 776 |
-- Noteworthy changes in version 8.1.0beta1 (2013-04-25) |
| 777 |
* **IMPORTANT:** name/channel entries can't be stacked any longer within a |
| 778 |
single resv {} block. Each entry now requires its own resv {} block. |
| 779 |
Read `doc/reference.conf` for more details |
| 780 |
* Added `resv::exempt` configuration option. Exempt can be either a |
| 781 |
ISO 3166 alpha-2 two letter country code, or a nick!user@host mask. |
| 782 |
CIDR is supported |
| 783 |
* Removed `channel::restrict_channels` configuration option |
| 784 |
* Preliminary libGeoIP support. Currently only used for exempt entries |
| 785 |
in resv {} blocks |
| 786 |
* Improved WEBIRC authentication; added `webirc` to `auth::flags`. |
| 787 |
A `webirc.` spoof is now no longer required |
| 788 |
* Implemented new memory pool allocator which basically is based upon Tor's |
| 789 |
mempool allocator for Tor cells |
| 790 |
* Implemented new binary database storage for X-, D-, K-, G-Lines and RESVs. |
| 791 |
Temporary bans are now stored as well and will persist after a reboot |
| 792 |
* Channel based resv {} blocks may now contain wildcards |
| 793 |
* NICK/JOIN now shows the actual reason of reserved nick-/channelnames |
| 794 |
* contrib/ and its content has been enirely removed from the tree |
| 795 |
* Added `serverhide::hide_services` configuration option |
| 796 |
* Added `nononreg` (+R) to `oper::umodes` and `general::oper_only_modes` |
| 797 |
* Implemented IRCv3.1 `away-notify` extension |
| 798 |
|
| 799 |
|
| 800 |
-- Noteworthy changes in version 8.0.9 (2013-05-16) |
| 801 |
* Fixed bug where ircd would sometimes drop a services link because |
| 802 |
of a missing argument to the `SVSMODE` command |
| 803 |
* Fixed weird idletimes shown in `TRACE` |
| 804 |
|
| 805 |
|
| 806 |
-- Noteworthy changes in version 8.0.8 (2013-04-28) |
| 807 |
* `STATS s` now shows configured services {} blocks as well |
| 808 |
* Fixed compile warnings, minor code cleanups and optimizations |
| 809 |
* Increased nickname history length to 32768 |
| 810 |
* Unidentified/unregistered nicks may not speak in +R channels |
| 811 |
|
| 812 |
|
| 813 |
-- Noteworthy changes in version 8.0.7 (2013-04-12) |
| 814 |
* Services may now set a channel topic without joining the channel first |
| 815 |
* Fixed bug where `WHOIS` would send empty sockhost information on TS5 servers |
| 816 |
* Remote server connection and split notices now go to new user mode +e. |
| 817 |
These previously used user mode +x. |
| 818 |
* Services may now change the host of a specific user |
| 819 |
via `SVSMODE <timestamp> <target> +x <hostname>` |
| 820 |
|
| 821 |
|
| 822 |
-- Noteworthy changes in version 8.0.6 (2013-01-28) |
| 823 |
* Fix bug where idle time sometimes is 0 even if the client didn't |
| 824 |
send any private message |
| 825 |
* Fixed possible core in try_parse_v4_netmask() |
| 826 |
|
| 827 |
|
| 828 |
-- Noteworthy changes in version 8.0.5 (2013-01-24) |
| 829 |
* **IMPORTANT:** nick and topic lengths are now configurable via `ircd.conf`. |
| 830 |
A `max_nick_length`, as well as a `max_topic_length` configuration option |
| 831 |
can now be found in the serverinfo {} block |
| 832 |
* Fixed build on GNU/Hurd |
| 833 |
* Fixed log files not getting reopened after `REHASH` |
| 834 |
* Improved logging of configuration file issues |
| 835 |
* `ircd.pid` has been accidentally saved in `/var` instead of `/var/run` |
| 836 |
* Linux RT signal support for notification of socket events has been dropped |
| 837 |
* Fixed `STATS Y|y` sometimes sending weird sendq/recvq values |
| 838 |
* `INFO` now also shows configured values of `disable_fake_channels`, |
| 839 |
and `stats_e_disabled` |
| 840 |
* m_webirc.c is now officially supported, and has been moved from contrib/ |
| 841 |
to modules/ |
| 842 |
* `WHOIS`, `STATS p`, and `TRACE` may now show fake idle times depending |
| 843 |
on how the new `class::min_idle` and `class::max_idle` configuration |
| 844 |
directives have been configured. This feature basically works in the |
| 845 |
same way as it does in csircd |
| 846 |
* The configuration parser now does support `year` and `month` units |
| 847 |
|
| 848 |
|
| 849 |
-- Noteworthy changes in version 8.0.4 (2013-01-02) |
| 850 |
* Fixed possible core on `USERHOST`/`ISON` with optimization enabled |
| 851 |
* Fixed bug where `can_flood` sometimes didn't work as expected |
| 852 |
|
| 853 |
|
| 854 |
-- Noteworthy changes in version 8.0.3 (2012-12-24) |
| 855 |
* Fixed core on `UNDLINE` |
| 856 |
* `XLINE`, `KLINE`, `RESV`, `DLINE`, `SQUIT`, and `KILL` now have the |
| 857 |
same default reason if no reason has been specified |
| 858 |
|
| 859 |
|
| 860 |
-- Noteworthy changes in version 8.0.2 (2012-12-20) |
| 861 |
* Minor updates to the build system |
| 862 |
* Fixed broken `--enable-assert` configure switch |
| 863 |
* Fixed bug where timed events stopped from working if the system's |
| 864 |
clock is running backwards |
| 865 |
* `STATS q|Q` now shows how many times a resv {} block has been matched |
| 866 |
* Fixed contributed WEBIRC module |
| 867 |
* IRC operators may now again see server generated nick rejection notices |
| 868 |
|
| 869 |
|
| 870 |
-- Noteworthy changes in version 8.0.1 (2012-11-04) |
| 871 |
* Fixed broken CIDR support for `CHALLENGE` based IRC operator logins |
| 872 |
* Fixed class limits not properly applying to operator {} blocks |
| 873 |
* Fixed possible `TBURST` desynchronization with services |
| 874 |
* Fixed `TBURST` from leaking the server name if it's a hidden server |
| 875 |
|
| 876 |
|
| 877 |
-- Noteworthy changes in version 8.0.0 (2012-10-18) |
| 878 |
* Fixed an off-by-one with spoofs. Spoofs are now also checked for |
| 879 |
invalid characters |
| 880 |
* Removed `general::use_whois_actually` configuration directive. |
| 881 |
This is now enabled by default |
| 882 |
* Minor `SQUIT` handling fixes |
| 883 |
* Fixed bancache not being updated on `CHGHOST`/`CHGIDENT` |
| 884 |
|
| 885 |
|
| 886 |
-- Noteworthy changes in version 8.0.0rc1 (2012-09-28) |
| 887 |
* Removed `general::client_flood` configuration option and added the |
| 888 |
new `recvq` configuration directive to class {} blocks. |
| 889 |
The max size of a receive queue can be seen in `STATS Y` |
| 890 |
for each class |
| 891 |
* Allow the `[` and `]` characters in server description |
| 892 |
|
| 893 |
|
| 894 |
-- Noteworthy changes in version 8.0.0beta3 (2012-08-24) |
| 895 |
* Fixed wrong syntax in several language files |
| 896 |
* Removed &localchannels |
| 897 |
* `PRIVMSG` to opers@some.server is no longer supported |
| 898 |
* Fixed bug that could lead to topic desynchronization |
| 899 |
* Removed `serverhide::disable_hidden` configuration option |
| 900 |
* Dropped ircd-hybrid-6 `GLINE` compatibility mode |
| 901 |
* Removed `use_invex`, `use_except` and `use_knock` configuration options. |
| 902 |
These features are now enabled by default |
| 903 |
|
| 904 |
|
| 905 |
-- Noteworthy changes in version 8.0.0beta2 (2012-07-21) |
| 906 |
* `channel::disable_fake_channels` now also disables ascii 29 (mIRC italic) |
| 907 |
when set to yes |
| 908 |
* Added `channel::max_chans_per_oper` configuration directive. The old way |
| 909 |
was to let IRC operators join three times the amount of max_chans_per_user |
| 910 |
* Replaced `MODLOAD`, `MODUNLOAD`, `MODRELOAD`, `MODLIST` and `MODRESTART` |
| 911 |
commands with the new `MODULE` command which can be fed with the `LOAD,` |
| 912 |
`UNLOAD`, `RELOAD` and `LIST` parameters. |
| 913 |
`MODRESTART` has been entirely removed. Use `MODULE RELOAD *` to reload |
| 914 |
all modules |
| 915 |
* Added back server notice when a client tries to obtain a reserved nick name |
| 916 |
* Removed `OMOTD` module |
| 917 |
* Added `set` to IRC operator privilege flags. Gives access to the `SET` command |
| 918 |
* Improved TS6 support |
| 919 |
* Channel keys/passwords are now case sensitive |
| 920 |
|
| 921 |
|
| 922 |
-- Noteworthy changes in version 8.0.0beta1 (2012-05-28) |
| 923 |
* Implemented full services support, including but not limited to the |
| 924 |
following changes: |
| 925 |
- Added `SVSNICK`, and `SVSMODE` command handlers |
| 926 |
- Added service stamps to `NICK`/`UID` messages |
| 927 |
- Added SVS to server capabilities (`CAPAB`). SVS capable servers can |
| 928 |
deal with extended `NICK`/`UID` messages that contain service IDs/stamps. |
| 929 |
- Changed rejected client notices to go to new user mode +j. These |
| 930 |
previously used user mode +r. |
| 931 |
- Added user mode +r (registered nick) and channel mode +r (registered channel) |
| 932 |
- Added user mode +R (only registered clients may send a private message) |
| 933 |
- Added channel mode +R (only registered clients may join that channel) |
| 934 |
- Various services shortcuts have been added (`NS`, `CS`, `NICKSERV`, `CHANSERV`, etc.) |
| 935 |
- Added services {} block to `ircd.conf` |
| 936 |
- Added services_name directive to general {} block |
| 937 |
- Added `GLOBOPS` mainly for services compatibility, but can be used by IRC operators, too |
| 938 |
* Removed `RKLINE` and `RXLINE` commands. Regular expression based bans should |
| 939 |
only be added via `ircd.conf` |
| 940 |
* Added `globops`, `restart`, `dline`, `undline` and `module` IRC operator privilege flags. |
| 941 |
Read `doc/reference.conf` for further explanation of what these flags control |
| 942 |
* Removed Idle-time klines |
| 943 |
* Cleaned up modules API. Old modules won't work anymore |
| 944 |
* Removed `general::burst_away` configuration directive. AWAY bursts are now |
| 945 |
controlled via `connect::flags` explicitly |
| 946 |
* Introduced new logging subsystem including log rotation based on |
| 947 |
file sizes. Log timestamp format is ISO8601 now |
| 948 |
* Added support for remote D-lines |
| 949 |
* Added user mode +H which is basically a replacement for the hidden_admin and |
| 950 |
`hidden_oper` operator flags. With user mode +H, IRC operator status can now |
| 951 |
be hidden even on remote servers |
| 952 |
* Added CIDR support for operator {} blocks |
| 953 |
* Removed the servlink program. ircd-hybrid can now make use of |
| 954 |
SSL/TLS for inter-server communication. |
| 955 |
NOTE: compressed server links are of course still available, but a SSL/TLS |
| 956 |
connection is required, as compression is now handled via OpenSSL |
| 957 |
* Removed `ssl_server_protocol` configuration directive and |
| 958 |
added `ssl_client_method` and `ssl_server_method` instead. |
| 959 |
Both of these options can now be changed at runtime |
| 960 |
* IRC operator login IDs are no longer limited to NICKLEN*2 |
| 961 |
* Removed `channel::burst_topicwho` configuration option. This feature is now |
| 962 |
enabled by default |
| 963 |
* `STATS Y|y` now reports CIDR limits as well |
| 964 |
* Added `m_webirc.c` to `contrib/` |
| 965 |
* Overall code cleanup and speed improvements |
| 966 |
|
| 967 |
-------------------------------------------------------------------------------- |
| 968 |
|
| 969 |
BUG REPORTS: If you run this code and encounter problems, you must report |
| 970 |
the bug by EMAIL to bugs@ircd-hybrid.org |
| 971 |
Please include a gdb backtrace and a copy of your config.h and |
| 972 |
ircd.conf with any report (with passwords and other sensitive |
| 973 |
information masked). |
| 974 |
|
| 975 |
DISCUSSION: There is a mailing list for discussion of hybrid issues, |
| 976 |
including betas. To subscribe, use this link: |
| 977 |
https://lists.ircd-hybrid.org/mailman/listinfo/hybrid |
| 978 |
This is the proper place to discuss new features, bugs, etc. |
| 979 |
|
| 980 |
Questions/comments directed to bugs@ircd-hybrid.org |
| 981 |
|
| 982 |
Other files recommended for reading: README, INSTALL |
| 983 |
|
| 984 |
-------------------------------------------------------------------------------- |
| 985 |
$Id$ |
