ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/branches/8.2.x/doc/reference.conf

Comparing:
ircd-hybrid/trunk/doc/example.conf (file contents), Revision 1817 by michael, Fri Apr 12 10:54:39 2013 UTC vs.
ircd-hybrid/trunk/doc/reference.conf (file contents), Revision 2012 by michael, Sun May 12 14:47:26 2013 UTC

#	Line 1 | Line 1
1	<	/* doc/example.conf - ircd-hybrid-8 Example configuration file
1	>	/* ircd-hybrid reference configuration file
2		* Copyright (C) 2000-2013 Hybrid Development Team
3		*
4		* Written by ejb, wcampbel, db, leeh and others
5	–	* Other example configurations can be found in the source dir under
6	–	* doc/.
5		*
6		* $Id$
7		*/
8
9	<	/* IMPORTANT NOTES:
9	>	/*
10	>	* ########################################################################
11	>	* IMPORTANT NOTES:
12		*
13		* auth {} blocks MUST be specified in order of precedence.  The first one
14		* that matches a user will be used.  So place spoofs first, then specials,
15		* then general access.
16	+	* ########################################################################
17		*
18		* Shell style (#), C++ style (//) and C style comments are supported.
19		*
#	Line 32 | Line 33
33		* Sizes and times may be singular or plural.
34		*/
35
36	<	/* EFNET NOTE:
36	<	*
37	<	* This config file is NOT suitable for EFNet.  EFNet admins should use
38	<	* example.efnet.conf
39	<	*/
40	<
36	>
37		/*
38		* serverinfo {}:  contains information about the server
39		*/
#	Line 51 | Line 47 | serverinfo {
47		* sid: a server's unique ID.  This is three characters long and must
48		* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	<	* NOTE: The letters must be capitalized.  This cannot be changed at runtime.
50	>	* NOTE: The letters must be capitalized. This cannot be changed at runtime.
51		*/
52		sid = "0HY";
53
#	Line 62 | Line 58 | serverinfo {
58
59		/*
60		* network info: the name and description of the network this server
61	<	* is on.  Shown in the 005 reply and used with serverhiding.
61	>	* is on. Shown in the 005 reply and used with serverhiding.
62		*/
63		network_name = "MyNet";
64		network_desc = "This is My Network";
#	Line 85 | Line 81 | serverinfo {
81		*/
82		#vhost6 = "3ffe:80e8:546::2";
83
84	<	/* max_clients: the maximum number of clients allowed to connect */
84	>	/* max_clients: the maximum number of clients allowed to connect. */
85		max_clients = 512;
86
87		/*
#	Line 121 | Line 117 | serverinfo {
117		* ssl certificate for encrypted client connection.
118		*
119		* This assumes your private RSA key is stored in rsa.key. You
120	<	* MUST have an RSA key in order to generate the certificate
120	>	* MUST have an RSA key in order to generate the certificate.
121	>	*
122	>	* Example command:
123		*
124		*      openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
125		*
#	Line 196 | Line 194 | admin {
194		* class {}:  contains information about classes for users
195		*/
196		class {
197	<	/* name: the name of the class */
197	>	/* name: the name of the class. */
198		name = "users";
199
200		/*
#	Line 229 | Line 227 | class {
227
228		/*
229		* the following lines are optional and allow you to define
230	<	* how many users can connect from one /NN subnet
230	>	* how many users can connect from one /NN subnet.
231		*/
232		cidr_bitlen_ipv4 = 24;
233		cidr_bitlen_ipv6 = 120;
#	Line 257 | Line 255 | class {
255		sendq = 100 kbytes;
256
257		/*
258	<	* min_idle: minimum idle time that is shown in /whois
258	>	* min_idle: minimum idle time that is shown in /whois.
259		*/
260		min_idle = 3 hours;
261
262		/*
263	<	* max_idle: maximum idle time that is shown in /whois
263	>	* max_idle: maximum idle time that is shown in /whois.
264		*/
265		max_idle = 8 hours;
266
#	Line 281 | Line 279 | class {
279		ping_time = 90 seconds;
280
281		/*
282	<	* connectfreq: only used in server classes.  Specifies the delay
282	>	* connectfreq: only used in server classes. Specifies the delay
283		* between autoconnecting to servers.
284		*/
285		connectfreq = 5 minutes;
286
287	<	/* max number: the amount of servers to autoconnect to */
287	>	/* max number: the amount of servers to autoconnect to. */
288		max_number = 1;
289
290	<	/* sendq: servers need a higher sendq as they send more data */
290	>	/* sendq: servers need a higher sendq as they send more data. */
291		sendq = 2 megabytes;
292		};
293
#	Line 298 | Line 296 | class {
296		*/
297		listen {
298		/*
299	<	* port: the specific port to listen on.  If no host is specified
299	>	* port: the specific port to listen on. If no host is specified
300		* before, it will listen on all available IPs.
301		*
302		* Ports are separated via a comma, a range may be specified using ".."
#	Line 311 | Line 309 | listen {
309		* Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
310		* unless you are an administrator.
311		*
312	<	* NOTE: The "flags" directive has to come before "port".  Always!
312	>	* NOTE: The "flags" directive has to come before "port". Always!
313		*
314		* Currently available flags are:
315		*
#	Line 325 | Line 323 | listen {
323
324		/*
325		* host: set a specific IP/host the ports after the line will listen
326	<	* on.  This may be ipv4 or ipv6.
326	>	* on. This may be ipv4 or ipv6.
327		*/
328		host = "1.2.3.4";
329		port = 7000, 7001;
#	Line 355 | Line 353 | auth {
353		encrypted = yes;
354
355		/*
356	<	* spoof: fake the users host to this.  This is free-form,
357	<	* just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
356	>	* spoof: fake the users host to this. This is free-form, just do
357	>	* everyone a favor and don't abuse it. ('=' prefix on /stats I)
358		*/
359		spoof = "I.still.hate.packets";
360
#	Line 375 | Line 373 | auth {
373		* resv_exempt   - exempt this user from resvs ('$' prefix on /stats I)
374		* no_tilde      - remove ~ from a user with no ident ('-' prefix on /stats I)
375		* can_flood     - allow this user to exceed flood limits ('|' prefix on /stats I)
376	<	* webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
376	>	* webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
377		*                 ('<' prefix on /stats I)
378		*/
379		flags = need_password, spoof_notice, exceed_limit, kline_exempt,
#	Line 384 | Line 382 | auth {
382
383		auth {
384		/*
385	<	* redirect: the server and port to redirect a user to.  A user does
386	<	* not have to obey the redirection, the ircd just suggests an alternative
385	>	* redirect: the server and port to redirect a user to. A user does not
386	>	* have to obey the redirection, the ircd just suggests an alternative
387		* server for them.
388		*/
389		redirserv = "this.is.not.a.real.server";
#	Line 405 | Line 403 | auth {
403
404		/*
405		* operator {}:  defines ircd operators
408	–	*
409	–	* ircd-hybrid no longer supports local operators, privileges are
410	–	* controlled via flags.
406		*/
407		operator {
408		/* name: the name of the oper */
#	Line 421 | Line 416 | operator {
416		user = "*@127.0.0.0/8";
417
418		/*
419	<	* password: the password required to oper.  By default this will
419	>	* password: the password required to oper. By default this will
420		* need to be encrypted by using the provided mkpasswd tool.
421		* Several password hash algorithms are available depending
422		* on your system's crypt() implementation. For example, a modern
#	Line 447 | Line 442 | operator {
442		class = "opers";
443
444		/*
445	<	* umodes: default usermodes opers get when they /oper.  If defined,
445	>	* umodes: default usermodes opers get when they /oper. If defined,
446		* it will override oper_umodes settings in general {}.
447		* Available usermodes:
448		*
#	Line 456 | Line 451 | operator {
451		* +C - cconn_full   - Client connection/quit notices full
452		* +D - deaf         - Don't receive channel messages
453		* +d - debug        - See debugging notices
454	+	* +e - external     - See remote server connection and split notices
455	+	* +F - farconnect   - Remote client connection/quit notices
456		* +f - full         - See auth{} block full notices
457		* +G - softcallerid - Server Side Ignore for users not on your channels
458		* +g - callerid     - Server Side Ignore (for privmsgs etc)
#	Line 466 | Line 463 | operator {
463		* +k - skill        - See server generated KILL messages
464		* +l - locops       - See LOCOPS messages
465		* +n - nchange      - See client nick changes
466	+	* +R - nononreg     - Only receive private messages from registered clients
467		* +s - servnotice   - See general server notices
468		* +u - unauth       - See unauthorized client notices
469		* +w - wallop       - See server generated WALLOPS
472	–	* +x - external     - See remote server connection and split notices
470		* +y - spy          - See LINKS, STATS, TRACE notices etc.
471		* +z - operwall     - See oper generated WALLOPS
472		*/
#	Line 480 | Line 477 | operator {
477		* allowed to do on the server. All options default to no.
478		* Available options:
479		*
480	<	* module       - allows MODULE
481	<	* global_kill  - allows remote users to be /KILL'd
482	<	* remote       - allows remote SQUIT and CONNECT
483	<	* remoteban    - allows remote KLINE/UNKLINE
484	<	* dline        - allows DLINE
485	<	* undline      - allows UNDLINE
486	<	* kline        - allows KILL and KLINE
487	<	* unkline      - allows UNKLINE
488	<	* gline        - allows GLINE
489	<	* xline        - allows XLINE
490	<	* globops      - allows GLOBOPS
491	<	* operwall     - allows OPERWALL
492	<	* nick_changes - allows oper to see nickchanges via usermode +n
493	<	* rehash       - allows oper to REHASH config
494	<	* die          - allows DIE
495	<	* restart      - allows RESTART
496	<	* set          - allows SET
497	<	* admin        - gives admin privileges. admins for example,
498	<	*                may see the real IP addresses of servers.
480	>	* module         - allows MODULE
481	>	* connect        - allows local CONNECT
482	>	* connect:remote - allows remote CONNECT
483	>	* squit          - allows local SQUIT
484	>	* squit:remote   - allows remote SQUIT
485	>	* kill           - allows to KILL local clients
486	>	* kill:remote    - allows remote users to be /KILL'd
487	>	* remoteban      - allows remote KLINE/UNKLINE
488	>	* dline          - allows DLINE
489	>	* undline        - allows UNDLINE
490	>	* kline          - allows KILL and KLINE
491	>	* unkline        - allows UNKLINE
492	>	* gline          - allows GLINE
493	>	* xline          - allows XLINE
494	>	* globops        - allows GLOBOPS
495	>	* operwall       - allows OPERWALL
496	>	* rehash         - allows oper to REHASH config
497	>	* die            - allows DIE
498	>	* restart        - allows RESTART
499	>	* set            - allows SET
500	>	* admin          - gives admin privileges. admins for example,
501	>	*                  may see the real IP addresses of servers.
502		*/
503	<	flags = global_kill, remote, kline, unkline, xline, globops, restart,
504	<	die, rehash, nick_changes, admin, operwall, module;
503	>	flags = kill, kill:remote, connect, connect:remote, kline, unkline,
504	>	xline, globops, restart, die, rehash, admin, operwall, module;
505		};
506
507		/*
#	Line 523 | Line 523 | connect {
523		name = "irc.uplink.com";
524
525		/*
526	<	* host: the host or IP to connect to.  If a hostname is used it
526	>	* host: the host or IP to connect to. If a hostname is used it
527		* must match the reverse dns of the server.
528		*/
529		host = "192.168.0.1";
#	Line 552 | Line 552 | connect {
552		port = 6666;
553
554		/*
555	<	* hub_mask: the mask of servers that this server may hub.  Multiple
556	<	* entries are permitted
555	>	* hub_mask: the mask of servers that this server may hub. Multiple
556	>	* entries are permitted.
557		*/
558		hub_mask = "*";
559
560		/*
561	<	* leaf_mask: the mask of servers this server may not hub.  Multiple
562	<	* entries are permitted.  Useful for forbidding EU -> US -> EU routes.
561	>	* leaf_mask: the mask of servers this server may not hub. Multiple
562	>	* entries are permitted. Useful for forbidding EU -> US -> EU routes.
563		*/
564		#       leaf_mask = "*.uk";
565
#	Line 642 | Line 642 | cluster {
642		*
643		* NOTE: This can be effectively used for remote klines.
644		*       Please note that there is no password authentication
645	<	*       for users setting remote klines.  You must also be
645	>	*       for users setting remote klines. You must also be
646		*       /oper'd in order to issue a remote kline.
647		*/
648		shared {
649		/*
650	<	* name: the server the user must be on to set klines.  If this is not
650	>	* name: the server the user must be on to set klines. If this is not
651		* specified, the user will be allowed to kline from all servers.
652		*/
653		name = "irc2.some.server";
654
655		/*
656	<	* user: the user@host mask that is allowed to set klines.  If this is
656	>	* user: the user@host mask that is allowed to set klines. If this is
657		* not specified, all users on the server above will be allowed to set
658		* a remote kline.
659		*/
#	Line 684 | Line 684 | kill {
684		reason = "Obviously hacked account";
685		};
686
687	–	kill {
688	–	user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
689	–
690	–	/*
691	–	* NOTE: You have to set type=regex; when using a regular expression
692	–	* based user entry
693	–	*/
694	–	type = regex;
695	–	};
696	–
687		/*
688		* deny {}:  IPs that are not allowed to connect (before DNS/ident lookup)
689		* Oper issued dlines will be added to the specified dline config
#	Line 704 | Line 694 | deny {
694		};
695
696		/*
697	<	* exempt {}: IPs that are exempt from deny {} and Dlines
697	>	* exempt {}:  IPs that are exempt from deny {} and Dlines
698		*/
699		exempt {
700		ip = "192.168.0.0/16";
#	Line 713 | Line 703 | exempt {
703		/*
704		* resv {}:  nicks and channels users may not use/join
705		*/
706	+	resv { mask = "clone*"; reason = "Clone bots"; };
707	+	resv { mask = "ChanServ"; reason = "Reserved for services"; };
708	+	resv { mask = "NickServ"; reason = "Reserved for services"; };
709	+	resv { mask = "OperServ"; reason = "Reserved for services"; };
710	+	resv { mask = "MemoServ"; reason = "Reserved for services"; };
711	+	resv { mask = "BotServ"; reason = "Reserved for services"; };
712	+	resv { mask = "HelpServ"; reason = "Reserved for services"; };
713	+	resv { mask = "HostServ"; reason = "Reserved for services"; };
714	+	resv { mask = "StatServ"; reason = "Reserved for services"; };
715	+	resv { mask = "#*services*"; reason = "Reserved for services"; };
716	+
717		resv {
718	<	/* reason: the reason for the proceeding resv's */
719	<	reason = "Reserved for services";
718	>	/*
719	>	* mask: masks starting with a '#' are automatically considered
720	>	* as channel name mask.
721	>	*/
722	>	mask = "#helsinki";
723	>	reason = "Channel is reserved for finnish inhabitants";
724
725	<	/* resv: the nicks and channels users may not join/use */
726	<	nick = "Global";
727	<	nick = "DevNull";
728	<	nick = "BotServ";
729	<	nick = "Services";
730	<	nick = "StatServ";
726	<	nick = "HelpServ";
727	<	nick = "HostServ";
728	<	nick = "NickServ";
729	<	nick = "ChanServ";
730	<	nick = "MemoServ";
731	<	nick = "OperServ";
732	<	channel = "#services";
733	<
734	<	/* resv: wildcard masks are also supported in nicks only */
735	<	reason = "Clone bots";
736	<	nick = "clone*";
725	>	/*
726	>	* exempt: can be either a ISO 3166 alpha-2 two letter country
727	>	* code, or a nick!user@host mask. CIDR is supported. Exempt
728	>	* entries can be stacked.
729	>	*/
730	>	exempt = "FI";
731		};
732
733		/*
734	<	* gecos {}:  The X: replacement, used for banning users based on
741	<	* their "realname".
734	>	* gecos {}:  Used for banning users based on their "realname".
735		*/
736		gecos {
737		name = "*sex*";
#	Line 750 | Line 743 | gecos {
743		reason = "Trojan drone";
744		};
745
753	–	gecos {
754	–	name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
755	–
756	–	/*
757	–	* NOTE: You have to set type=regex; when using a regular expression
758	–	* based name entry
759	–	*/
760	–	type = regex;
761	–	};
762	–
746		/*
747		* channel {}:  The channel block contains options pertaining to channels
748		*/
#	Line 780 | Line 763 | channel {
763		disable_fake_channels = yes;
764
765		/*
783	–	* restrict_channels: reverse channel RESVs logic, only reserved
784	–	* channels are allowed
785	–	*/
786	–	restrict_channels = no;
787	–
788	–	/*
766		* knock_delay: The amount of time a user must wait between issuing
767		* the knock command.
768		*/
#	Line 809 | Line 786 | channel {
786		*/
787		max_chans_per_oper = 50;
788
812	–	/* quiet_on_ban: stop banned people talking in channels. */
813	–	quiet_on_ban = yes;
814	–
789		/* max_bans: maximum number of +b/e/I modes in a channel */
790		max_bans = 100;
791
#	Line 833 | Line 807 | channel {
807
808		/*
809		* default_split_user_count: when the usercount is lower than this level,
810	<	* consider ourselves split.  This must be set for automatic splitmode.
810	>	* consider ourselves split. This must be set for automatic splitmode.
811		*/
812		default_split_user_count = 0;
813
814		/*
815		* default_split_server_count: when the servercount is lower than this,
816	<	* consider ourselves split.  This must be set for automatic splitmode.
816	>	* consider ourselves split. This must be set for automatic splitmode.
817		*/
818		default_split_server_count = 0;
819
#	Line 857 | Line 831 | channel {
831		serverhide {
832		/*
833		* flatten_links: this option will show all servers in /links appear
834	<	* that they are linked to this current server
834	>	* that they are linked to this current server.
835		*/
836		flatten_links = no;
837
#	Line 869 | Line 843 | serverhide {
843
844		/*
845		* hidden: hide this server from a /links output on servers that
846	<	* support it.  This allows hub servers to be hidden etc.
846	>	* support it. This allows hub servers to be hidden etc.
847		*/
848		hidden = no;
849
#	Line 880 | Line 854 | serverhide {
854		hide_servers = no;
855
856		/*
857	+	* hide_services: define this if you want to hide the location of
858	+	* services servers that are specified in the service{} block.
859	+	*/
860	+	hide_services = no;
861	+
862	+	/*
863		* Use this as the servername users see if hide_servers = yes.
864		*/
865		hidden_name = "*.hidden.com";
#	Line 910 | Line 890 | general {
890		/* max_watch: maximum WATCH entries a client can have. */
891		max_watch = 60;
892
893	<	/* gline_enable: enable glines, network wide temp klines */
893	>	/* gline_enable: enable glines, network wide temp klines. */
894		gline_enable = yes;
895
896		/*
897		* gline_duration: the amount of time a gline will remain on your
898	<	* server before expiring
898	>	* server before expiring.
899		*/
900		gline_duration = 1 day;
901
902		/*
903	<	* gline_request_duration:  how long a pending G-line can be around.
904	<	* 10 minutes should be plenty
903	>	* gline_request_duration: how long a pending G-line can be around.
904	>	* 10 minutes should be plenty.
905		*/
906		gline_request_duration = 10 minutes;
907
908		/*
909		* gline_min_cidr: the minimum required length of a CIDR bitmask
910	<	* for IPv4 based glines
910	>	* for IPv4 based glines.
911		*/
912		gline_min_cidr = 16;
913
914		/*
915		* gline_min_cidr6: the minimum required length of a CIDR bitmask
916	<	* for IPv6 based glines
916	>	* for IPv6 based glines.
917		*/
918		gline_min_cidr6 = 48;
919
#	Line 943 | Line 923 | general {
923		invisible_on_connect = yes;
924
925		/*
926	<	* Max time from the nickname change that still causes KILL
927	<	* automatically to switch for the current nick of that user.
926	>	* kill_chase_time_limit: maximum time from the nickname change that
927	>	* still causes KILL automatically to switch for the current nick of
928	>	* that user.
929		*/
930		kill_chase_time_limit = 90 seconds;
931
932		/*
933	<	* If hide_spoof_ips is disabled, opers will be allowed to see the real
933	>	* hide_spoof_ips: if disabled, opers will be allowed to see the real
934		* IP of spoofed users in /trace etc. If this is defined they will be
935		* shown a masked IP.
936		*/
937		hide_spoof_ips = yes;
938
939		/*
940	<	* Ignore bogus timestamps from other servers.  Yes, this will desync
941	<	* the network, but it will allow chanops to resync with a valid non TS 0
940	>	* Ignore bogus timestamps from other servers. Yes, this will desync the
941	>	* network, but it will allow chanops to resync with a valid non TS 0
942		*
943		* This should be enabled network wide, or not at all.
944		*/
#	Line 969 | Line 950 | general {
950		*/
951		disable_auth = no;
952
953	<	/* disable_remote_commands: disable users doing commands on remote servers */
953	>	/* disable_remote_commands: disable users doing commands on remote servers. */
954		disable_remote_commands = no;
955
956		/*
#	Line 980 | Line 961 | general {
961
962		/*
963		* default_floodcount: the default value of floodcount that is configurable
964	<	* via /quote set floodcount.  This is the amount of lines a user
964	>	* via /quote set floodcount. This is the amount of lines a user
965		* may send to any other user/channel in one second.
966		*/
967		default_floodcount = 10;
#	Line 999 | Line 980 | general {
980
981		/*
982		* min_nonwildcard: the minimum non wildcard characters in k/d/g lines
983	<	* placed via the server.  klines hand placed are exempt from limits.
983	>	* placed via the server. K-lines hand placed are exempt from limits.
984		* wildcard chars: '.' ':' '*' '?' '@' '!' '#'
985		*/
986		min_nonwildcard = 4;
987
988		/*
989		* min_nonwildcard_simple: the minimum non wildcard characters in
990	<	* gecos bans.  wildcard chars: '*' '?' '#'
990	>	* gecos bans. wildcard chars: '*' '?' '#'
991		*/
992		min_nonwildcard_simple = 3;
993
994	<	/* max_accept: maximum allowed /accept's for +g usermode */
994	>	/* max_accept: maximum allowed /accept's for +g usermode. */
995		max_accept = 20;
996
997	<	/* anti_nick_flood: enable the nickflood control code */
997	>	/* anti_nick_flood: enable the nickflood control code. */
998		anti_nick_flood = yes;
999
1000		/* nick flood: the nick changes allowed in the specified period */
#	Line 1028 | Line 1009 | general {
1009
1010		/*
1011		* ts delta: the time delta allowed between server clocks before
1012	<	* a warning is given, or before the link is dropped.  all servers
1012	>	* a warning is given, or before the link is dropped. All servers
1013		* should run ntpdate/rdate to keep clocks in sync
1014		*/
1015		ts_warn_delta = 30 seconds;
#	Line 1036 | Line 1017 | general {
1017
1018		/*
1019		* warn_no_nline: warn opers about servers that try to connect but
1020	<	* we don't have a connect {} block for.  Twits with misconfigured
1020	>	* we don't have a connect {} block for. Twits with misconfigured
1021		* servers can get really annoying with this enabled.
1022		*/
1023		warn_no_nline = yes;
1024
1025		/*
1026		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1027	<	* operators and administrators.  Doing so is a good idea in case
1027	>	* operators and administrators. Doing so is a good idea in case
1028		* there are any exempted (exempt{}) server IPs you don't want to
1029		* see leaked.
1030		*/
#	Line 1056 | Line 1037 | general {
1037		stats_P_oper_only = yes;
1038
1039		/*
1040	<	* stats i oper only: make stats i (auth {}) oper only. set to:
1041	<	*     yes:    show users no auth blocks, made oper only.
1042	<	*     masked: show users first matching auth block
1043	<	*     no:     show users all auth blocks.
1040	>	* stats i oper only: make stats i (auth {}) oper only. Set to:
1041	>	*     yes    - show users no auth blocks, made oper only.
1042	>	*     masked - show users first matching auth block
1043	>	*     no     - show users all auth blocks.
1044		*/
1045		stats_i_oper_only = yes;
1046
1047		/*
1048	<	* stats_k_oper_only: make stats k/K (klines) oper only.  set to:
1049	<	*     yes:    show users no auth blocks, made oper only
1050	<	*     masked: show users first matching auth block
1051	<	*     no:     show users all auth blocks.
1048	>	* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1049	>	*     yes    - show users no auth blocks, made oper only
1050	>	*     masked - show users first matching auth block
1051	>	*     no     - show users all auth blocks.
1052		*/
1053		stats_k_oper_only = yes;
1054
#	Line 1112 | Line 1093 | general {
1093
1094		/*
1095		* true_no_oper_flood: completely eliminate flood limits for opers
1096	<	* and for clients with can_flood = yes in their auth {} blocks
1096	>	* and for clients with can_flood = yes in their auth {} blocks.
1097		*/
1098		true_no_oper_flood = yes;
1099
1100	<	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1100	>	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1101		oper_pass_resv = yes;
1102
1103		/* REMOVE ME.  The following line checks you've been reading. */
#	Line 1124 | Line 1105 | general {
1105
1106		/*
1107		* max_targets: the maximum amount of targets in a single
1108	<	* PRIVMSG/NOTICE.  Set to 999 NOT 0 for unlimited.
1108	>	* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1109		*/
1110		max_targets = 4;
1111
1112		/*
1132	–	* message_locale: the default message locale
1133	–	* Use "standard" for the compiled in defaults.
1134	–	* To install the translated messages, go into messages/ in the
1135	–	* source directory and run `make install'.
1136	–	*/
1137	–	message_locale = "standard";
1138	–
1139	–	/*
1113		* usermodes configurable: a list of usermodes for the options below
1114		*
1115		* +b - bots         - See bot and drone flooding notices
#	Line 1144 | Line 1117 | general {
1117		* +C - cconn_full   - Client connection/quit notices full
1118		* +D - deaf         - Don't receive channel messages
1119		* +d - debug        - See debugging notices
1120	+	* +e - external     - See remote server connection and split notices
1121	+	* +F - farconnect   - Remote client connection/quit notices
1122		* +f - full         - See auth{} block full notices
1123		* +G - softcallerid - Server Side Ignore for users not on your channels
1124		* +g - callerid     - Server Side Ignore (for privmsgs etc)
#	Line 1154 | Line 1129 | general {
1129		* +k - skill        - See server generated KILL messages
1130		* +l - locops       - See LOCOPS messages
1131		* +n - nchange      - See client nick changes
1132	+	* +R - nononreg     - Only receive private messages from registered clients
1133		* +s - servnotice   - See general server notices
1134		* +u - unauth       - See unauthorized client notices
1135		* +w - wallop       - See server generated WALLOPS
1160	–	* +x - external     - See remote server connection and split notices
1136		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1137		* +z - operwall     - See oper generated WALLOPS
1138		*/
#	Line 1165 | Line 1140 | general {
1140		/* oper_only_umodes: usermodes only opers may set */
1141		oper_only_umodes = bots, cconn, cconn_full, debug, full, hidden, skill,
1142		nchange, rej, spy, external, operwall,
1143	<	locops, unauth;
1143	>	locops, unauth, farconnect;
1144
1145		/* oper_umodes: default usermodes opers get when they /oper */
1146		oper_umodes = bots, locops, servnotice, operwall, wallop;
1147
1148		/*
1149		* use_egd: if your system does not have *random devices yet you
1150	<	* want to use OpenSSL and encrypted links, enable this.  Beware -
1151	<	* EGD is *very* CPU intensive when gathering data for its pool
1150	>	* want to use OpenSSL and encrypted links, enable this. Beware -
1151	>	* EGD is *very* CPU intensive when gathering data for its pool.
1152		*/
1153		#       use_egd = yes;
1154
#	Line 1185 | Line 1160 | general {
1160
1161		/*
1162		* throttle_time: the minimum amount of time between connections from
1163	<	* the same ip.  exempt {} blocks are excluded from this throttling.
1164	<	* Offers protection against flooders who reconnect quickly.
1163	>	* the same ip. exempt {} blocks are excluded from this throttling.
1164	>	* Offers protection against flooders who reconnect quickly.
1165		* Set to 0 to disable.
1166		*/
1167		throttle_time = 10;
#	Line 1200 | Line 1175 | modules {
1175		path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1176		path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1177
1178	<	/* module: the name of a module to load on startup/rehash */
1178	>	/* module: the name of a module to load on startup/rehash. */
1179		#module = "some_module.la";
1180		};
1181
#	Line 1251 | Line 1226 | log {
1226		type = debug;
1227		name = "/home/ircd/var/log/debug.log";
1228		size = 50 megabytes;
1229	<	};
1229	>	};
1230		};

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)