ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/branches/8.2.x/doc/reference.conf

Comparing:
ircd-hybrid/trunk/doc/reference.conf (file contents), Revision 1825 by michael, Sun Apr 14 19:54:48 2013 UTC vs.
ircd-hybrid/branches/8.2.x/doc/reference.conf (file contents), Revision 4253 by michael, Fri Jul 18 19:05:01 2014 UTC

#	Line 1 | Line 1
1	<	/* ircd-hybrid reference configuration file
2	<	* Copyright (C) 2000-2013 Hybrid Development Team
1	>	/*
2	>	* This is an example configuration file for ircd-hybrid
3		*
4	<	* Written by ejb, wcampbel, db, leeh and others
4	>	* Copyright (c) 2000-2014 ircd-hybrid development team
5		*
6		* $Id$
7		*/
8
9		/*
10		* ########################################################################
11	<	* IMPORTANT NOTES:
11	>	* IMPORTANT NOTE:
12		*
13	<	* auth {} blocks MUST be specified in order of precedence.  The first one
14	<	* that matches a user will be used.  So place spoofs first, then specials,
13	>	* auth {} blocks MUST be specified in order of precedence. The first one
14	>	* that matches a user will be used. So place spoofs first, then specials,
15		* then general access.
16		* ########################################################################
17		*
#	Line 23 | Line 23
23		*
24		* Times/durations are written as:
25		*        12 hours 30 minutes 1 second
26	<	*
26	>	*
27		* Valid units of time:
28		*        year, month, week, day, hour, minute, second
29		*
30		* Valid units of size:
31		*        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
32		*
33	<	* Sizes and times may be singular or plural.
34	<	*/
33	>	* Sizes and times may be singular or plural.
34	>	*/
35
36
37		/*
#	Line 39 | Line 39
39		*/
40		serverinfo {
41		/*
42	<	* name: the name of this server.  This cannot be changed at runtime.
42	>	* name: the name of this server. This cannot be changed at runtime.
43		*/
44		name = "hades.arpa";
45
46		/*
47	<	* sid: a server's unique ID.  This is three characters long and must
48	<	* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
47	>	* sid: a server's unique ID. This is three characters long and must
48	>	* be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	<	* NOTE: The letters must be capitalized.  This cannot be changed at runtime.
50	>	*
51	>	* NOTE: The letters must be capitalized. This cannot be changed at runtime.
52		*/
53		sid = "0HY";
54
#	Line 58 | Line 59 | serverinfo {
59
60		/*
61		* network info: the name and description of the network this server
62	<	* is on.  Shown in the 005 reply and used with serverhiding.
62	>	* is on. Shown in the 005 reply and used with serverhiding.
63		*/
64		network_name = "MyNet";
65		network_desc = "This is My Network";
#	Line 73 | Line 74 | serverinfo {
74		* vhost: the IP to bind to when we connect outward to ipv4 servers.
75		* This should be an ipv4 IP only, or "*" for INADDR_ANY.
76		*/
77	<	#vhost = "192.169.0.1";
77	>	#       vhost = "192.169.0.1";
78
79		/*
80	<	* vhost6: the IP to bind to when we connect outward to ipv6 servers.
81	<	* This should be an ipv6 IP only, or "*" for INADDR_ANY.
80	>	* vhost6: the address to bind to when we make outgoing connections
81	>	* to IPv6 servers. This should be an IPv6 address, or "*" for INADDR_ANY.
82		*/
83	<	#vhost6 = "3ffe:80e8:546::2";
83	>	#       vhost6 = "3ffe:80e8:546::2";
84
85	<	/* max_clients: the maximum number of clients allowed to connect */
85	>	/* max_clients: the maximum number of clients allowed to connect. */
86		max_clients = 512;
87
88		/*
#	Line 98 | Line 99 | serverinfo {
99		max_topic_length = 160;
100
101		/*
102	<	* rsa_private_key_file: the path to the file containing our
103	<	* rsa key for cryptlink.
102	>	* rsa_private_key_file: the path to the file containing the
103	>	* RSA key.
104	>	*
105	>	* Example commands to store a 2048 bit RSA key in rsa.key:
106		*
104	–	* Example command to store a 2048 bit RSA keypair in
105	–	* rsa.key, and the public key in rsa.pub:
106	–	*
107		*      openssl genrsa -out rsa.key 2048
108	<	*      openssl rsa -in rsa.key -pubout -out rsa.pub
109	<	*      chown <ircd-user>.<ircd.group> rsa.key rsa.pub
108	>	*      chown <ircd-user>.<ircd.group> rsa.key
109		*      chmod 0600 rsa.key
111	–	*      chmod 0644 rsa.pub
110		*/
111	<	#rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
111	>	#       rsa_private_key_file = "etc/rsa.key";
112
113		/*
114		* ssl_certificate_file: the path to the file containing our
115	<	* ssl certificate for encrypted client connection.
115	>	* SSL certificate for encrypted client connection.
116		*
117		* This assumes your private RSA key is stored in rsa.key. You
118	<	* MUST have an RSA key in order to generate the certificate
118	>	* MUST have an RSA key in order to generate the certificate.
119	>	*
120	>	* Example command:
121		*
122		*      openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
123		*
#	Line 130 | Line 130 | serverinfo {
130		*      Common Name: irc.someirc.net
131		*      E-mail: you@domain.com
132		*/
133	<	#ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
133	>	#       ssl_certificate_file = "etc/cert.pem";
134
135		/*
136	<	* ssl_dh_param_file:
137	<	*
138	<	* Path to the PEM encoded Diffie-Hellman parameter file.
139	<	* DH parameters are strictly required when using ciphers
140	<	* with EDH (ephemeral Diffie-Hellman) key exchange.
136	>	* ssl_dh_param_file: path to the PEM encoded Diffie-Hellman
137	>	* parameter file. DH parameters are required when using
138	>	* ciphers with EDH (ephemeral Diffie-Hellman) key exchange.
139		*
140		* A DH parameter file can be created by running:
141		*
142	<	*      openssl dhparam -out dhparam.pem 1024
142	>	*      openssl dhparam -out dhparam.pem 2048
143		*
144		* Prime size must be at least 1024 bits. Further information
145		* regarding specific OpenSSL dhparam command-line options
146		* can be found in the OpenSSL manual.
147		*/
148	<	#ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
148	>	#       ssl_dh_param_file = "etc/dhparam.pem";
149
150		/*
151	<	* ssl_cipher_list:
151	>	* ssl_dh_elliptic_curve: defines the curve to use for the
152	>	* Elliptic Curve Diffie-Hellman (ECDH) algorithm.
153	>	*
154	>	* A list of supported curves by OpenSSL can be obtained by running:
155		*
156	<	* List of ciphers that are supported by _this_ server. Can be used to
157	<	* enforce specific ciphers for incoming SSL/TLS connections.
158	<	* If a client (which also includes incoming server connections) isn't
159	<	* capable of any cipher listed below, the connection will simply be
160	<	* rejected.
156	>	*      openssl ecparam -list_curves
157	>	*/
158	>	#       ssl_dh_elliptic_curve = "secp521r1";
159	>
160	>	/*
161	>	* ssl_cipher_list: list of ciphers to support on _this_ server.
162	>	* Can be used to enforce specific ciphers for incoming SSL/TLS
163	>	* connections. If a client (which also includes incoming server connections)
164	>	* is not capable of using any of the ciphers listed here, the connection will
165	>	* simply be rejected.
166		*
167	<	* A list of supported ciphers can be obtained by running:
167	>	* A list of supported ciphers by OpenSSL can be obtained by running:
168		*
169		*      openssl ciphers -ssl3 -tls1 -v
170		*
171		* Multiple ciphers are separated by colons. The order of preference is
172		* from left to right.
173		*/
174	<	#ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
174	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
175
176		/*
177	<	* ssl_server_method:
178	<	* ssl_client_method:
177	>	* ssl_message_digest_algorithm: defines what cryptographic hash function
178	>	* to use for generating fingerprint hashes of X.509 certificates.
179	>	* Default is SHA-256 if nothing else is specified.
180	>	*
181	>	* A list of supported message digest algorithms by OpenSSL can be obtained by running:
182		*
183	<	* SSL/TLS methods we provide for incoming (server method) and
175	<	* outgoing (client method) SSL/TLS connections.
176	<	* This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
183	>	*      openssl list-message-digest-algorithms
184		*/
185	<	#ssl_server_method = tlsv1, sslv3;
179	<	#ssl_client_method = tlsv1;
185	>	#       ssl_message_digest_algorithm = "sha256";
186		};
187
188		/*
#	Line 192 | Line 198 | admin {
198		* class {}:  contains information about classes for users
199		*/
200		class {
201	<	/* name: the name of the class */
201	>	/* name: the name of the class. */
202		name = "users";
203
204		/*
#	Line 203 | Line 209 | class {
209
210		/*
211		* number_per_ip: how many local users are allowed to connect
212	<	* from one IP  (optional)
212	>	* from a single IP address (optional)
213		*/
214		number_per_ip = 2;
215
216		/*
217		* max_local: how many local users are allowed to connect
218	<	* from one ident@host  (optional)
218	>	* from a single ident@host (optional)
219		*/
220		max_local = 2;
221
222		/*
223	<	* max_global: network-wide limit of users per ident@host  (optional)
223	>	* max_global: network-wide limit of users per ident@host (optional)
224		*/
225		max_global = 10;
226
#	Line 224 | Line 230 | class {
230		max_number = 100;
231
232		/*
233	<	* the following lines are optional and allow you to define
234	<	* how many users can connect from one /NN subnet
233	>	* The following lines are optional and allow you to define
234	>	* how many users can connect from one /NN subnet.
235		*/
236		cidr_bitlen_ipv4 = 24;
237		cidr_bitlen_ipv6 = 120;
238		number_per_cidr = 16;
239
240		/*
241	<	* sendq: the amount of data allowed in a clients send queue before
241	>	* sendq: the amount of data allowed in a client's send queue before
242		* they are dropped.
243		*/
244		sendq = 100 kbytes;
245
246		/*
247	<	* recvq: maximum amount of data in a clients receive queue before
247	>	* recvq: the amount of data allowed in a client's receive queue before
248		* they are dropped for flooding. Defaults to 2560 if the chosen
249		* value isn't within the range of 512 to 8000.
250		*/
#	Line 252 | Line 258 | class {
258		max_number = 100;
259		sendq = 100 kbytes;
260
261	+
262	+	/*
263	+	* max_channels: maximum number of channels users in this class can join.
264	+	*/
265	+	max_channels = 60;
266	+
267		/*
268	<	* min_idle: minimum idle time that is shown in /whois
268	>	* min_idle: minimum idle time that is shown in /whois.
269		*/
270		min_idle = 3 hours;
271
272		/*
273	<	* max_idle: maximum idle time that is shown in /whois
273	>	* max_idle: maximum idle time that is shown in /whois.
274		*/
275		max_idle = 8 hours;
276
277		/*
278		* flags:
279		*
280	<	* random_idle          - idle time is randomly selected within the
281	<	*                        range of min_idle to max_idle
282	<	* hide_idle_from_opers - fake idle time will be shown to operators, too
280	>	* random_idle          - a fake idle time is set randomly between
281	>	*                        min_idle and max_idle
282	>	* hide_idle_from_opers - the fake idle time will also be shown to operators
283		*/
284		flags = random_idle, hide_idle_from_opers;
285		};
#	Line 277 | Line 289 | class {
289		ping_time = 90 seconds;
290
291		/*
292	<	* connectfreq: only used in server classes.  Specifies the delay
292	>	* connectfreq: only used in server classes. Specifies the delay
293		* between autoconnecting to servers.
294		*/
295		connectfreq = 5 minutes;
296
297	<	/* max number: the amount of servers to autoconnect to */
297	>	/* max number: the number of servers to autoconnect to. */
298		max_number = 1;
299
300	<	/* sendq: servers need a higher sendq as they send more data */
300	>	/* sendq: servers need a higher sendq as they send more data. */
301		sendq = 2 megabytes;
302		};
303
304		/*
305	+	* motd {}: Allows the display of a different MOTD to a client
306	+	* depending on its origin. Applies to local users only.
307	+	*/
308	+	motd {
309	+	/*
310	+	* mask: multiple mask entries are permitted. Mask can either be
311	+	* a class name or a hostname. CIDR is supported.
312	+	*/
313	+	mask = "*.at";
314	+	mask = "*.de";
315	+	mask = "*.ch";
316	+
317	+	/*
318	+	* file: path to the actual motd file.
319	+	*/
320	+	file = "etc/german.motd";
321	+	};
322	+
323	+	/*
324		* listen {}:  contains information about the ports ircd listens on
325		*/
326		listen {
327		/*
328	<	* port: the specific port to listen on.  If no host is specified
329	<	* before, it will listen on all available IPs.
328	>	* port: the port to listen on. If no host is specified earlier
329	>	* in the listen {} block, it will listen on all available IPs.
330		*
331	<	* Ports are separated via a comma, a range may be specified using ".."
331	>	* Ports are separated by commas; a range may be specified using ".."
332		*/
333	<
334	<	/* port: listen on all available IPs, ports 6665 to 6669 */
333	>
334	>	/* port: listen on all available IP addresses, ports 6665 to 6669 */
335		port = 6665 .. 6669;
336
337		/*
338	<	* Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
338	>	* Listen on 192.168.0.1/6697 with SSL enabled and hidden from STATS P
339		* unless you are an administrator.
340		*
341	<	* NOTE: The "flags" directive has to come before "port".  Always!
341	>	* NOTE: The "flags" directive always has to come before "port".
342		*
343		* Currently available flags are:
344		*
#	Line 320 | Line 351 | listen {
351		port = 6697;
352
353		/*
354	<	* host: set a specific IP/host the ports after the line will listen
355	<	* on.  This may be ipv4 or ipv6.
354	>	* host: set a specific IP address/host to listen on using the
355	>	* subsequent port definitions. This may be IPv4 or IPv6.
356		*/
357		host = "1.2.3.4";
358		port = 7000, 7001;
#	Line 336 | Line 367 | listen {
367		auth {
368		/*
369		* user: the user@host allowed to connect. Multiple user
370	<	* lines are permitted per auth block.
370	>	* lines are permitted within each auth block.
371		*/
372		user = "*@172.16.0.0/12";
373		user = "*test@123D:B567:*";
374
375	<	/* password: an optional password that is required to use this block */
375	>	/* password: an optional password that is required to use this block. */
376		password = "letmein";
377
378		/*
#	Line 351 | Line 382 | auth {
382		encrypted = yes;
383
384		/*
385	<	* spoof: fake the users host to this.  This is free-form,
386	<	* just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
385	>	* spoof: fake the user's host to this. This is free-form, just do
386	>	* everyone a favor and don't abuse it. ('=' prefix on /stats I)
387		*/
388		spoof = "I.still.hate.packets";
389
390	<	/* class: the class the user is placed in */
390	>	/* class: the class the user is placed in. */
391		class = "opers";
392
393		/*
#	Line 371 | Line 402 | auth {
402		* resv_exempt   - exempt this user from resvs ('$' prefix on /stats I)
403		* no_tilde      - remove ~ from a user with no ident ('-' prefix on /stats I)
404		* can_flood     - allow this user to exceed flood limits ('|' prefix on /stats I)
405	<	* webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
405	>	* webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
406		*                 ('<' prefix on /stats I)
407		*/
408		flags = need_password, spoof_notice, exceed_limit, kline_exempt,
#	Line 380 | Line 411 | auth {
411
412		auth {
413		/*
414	<	* redirect: the server and port to redirect a user to.  A user does
415	<	* not have to obey the redirection, the ircd just suggests an alternative
414	>	* redirect: the server and port to redirect a user to. A user does not
415	>	* have to obey the redirection; the ircd just suggests an alternative
416		* server for them.
417		*/
418		redirserv = "this.is.not.a.real.server";
419		redirport = 6667;
420	<
420	>
421		user = "*.server";
422
423	<	/* class: a class is required even though it is not used */
423	>	/* class: a class is required even though it is not used. */
424		class = "users";
425		};
426
#	Line 401 | Line 432 | auth {
432
433		/*
434		* operator {}:  defines ircd operators
404	–	*
405	–	* ircd-hybrid no longer supports local operators, privileges are
406	–	* controlled via flags.
435		*/
436		operator {
437		/* name: the name of the oper */
438		name = "sheep";
439
440		/*
441	<	* user: the user@host required for this operator. Multiple
442	<	* user="" lines are supported.
441	>	* user: the user@host required for this operator. Multiple user
442	>	* lines are permitted within each operator block.
443		*/
444		user = "*sheep@192.168.0.0/16";
445		user = "*@127.0.0.0/8";
446
447		/*
448	<	* password: the password required to oper.  By default this will
448	>	* password: the password required to oper. By default this will
449		* need to be encrypted by using the provided mkpasswd tool.
450		* Several password hash algorithms are available depending
451		* on your system's crypt() implementation. For example, a modern
452	<	* glibc already has support for SHA-256/512, and MD5 encryption
452	>	* glibc already has support for the SHA-256/512 and MD5 encryption
453		* algorithms.
454		*/
455		password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
#	Line 434 | Line 462 | operator {
462
463		/*
464		* rsa_public_key_file: the public key for this oper when using Challenge.
465	<	* A password should not be defined when this is used, see
465	>	* A password should not be defined when this is used; see
466		* doc/challenge.txt for more information.
467		*/
468	<	#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
468	>	#       rsa_public_key_file = "etc/oper.pub";
469	>
470	>	/*
471	>	* ssl_certificate_fingerprint: enhances security by additionally checking
472	>	* the oper's client certificate fingerprint against the specified
473	>	* fingerprint below.
474	>	*
475	>	* Hint: your users can use the following command to obtain a SHA-256 hash
476	>	* of their ssl certificate:
477	>	*
478	>	*      openssl x509 -sha256 -noout -fingerprint -in cert.pem | sed -e 's/^.*=//;s/://g'
479	>	*/
480	>	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
481	>
482	>	/*
483	>	* ssl_connection_required: client must be connected over SSL/TLS
484	>	* in order to be able to use this oper{} block.
485	>	* Default is 'no' if nothing else is specified.
486	>	*/
487	>	ssl_connection_required = no;
488
489	<	/* class: the class the oper joins when they successfully /oper */
489	>	/* class: the class the oper joins when they successfully /oper or /challenge. */
490		class = "opers";
491
492		/*
493	<	* umodes: default usermodes opers get when they /oper.  If defined,
494	<	* it will override oper_umodes settings in general {}.
493	>	* umodes: the default usermodes opers get when they /oper or /challenge.
494	>	* If defined, it will override oper_umodes settings in general {}.
495		* Available usermodes:
496		*
497		* +b - bots         - See bot and drone flooding notices
498		* +c - cconn        - Client connection/quit notices
452	–	* +C - cconn_full   - Client connection/quit notices full
499		* +D - deaf         - Don't receive channel messages
500		* +d - debug        - See debugging notices
501		* +e - external     - See remote server connection and split notices
502	+	* +F - farconnect   - Remote client connection/quit notices
503		* +f - full         - See auth{} block full notices
504		* +G - softcallerid - Server Side Ignore for users not on your channels
505		* +g - callerid     - Server Side Ignore (for privmsgs etc)
506		* +H - hidden       - Hides operator status to other users
507	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
461	<	*                     a channel
507	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
508		* +j - rej          - See rejected client notices
509		* +k - skill        - See server generated KILL messages
510		* +l - locops       - See LOCOPS messages
511		* +n - nchange      - See client nick changes
512	+	* +p - hidechans    - Hides channel list in WHOIS
513	+	* +q - hideidle     - Hides idle and signon time in WHOIS
514	+	* +R - nononreg     - Only receive private messages from registered clients
515		* +s - servnotice   - See general server notices
516		* +u - unauth       - See unauthorized client notices
517		* +w - wallop       - See server generated WALLOPS
518		* +y - spy          - See LINKS, STATS, TRACE notices etc.
470	–	* +z - operwall     - See oper generated WALLOPS
519		*/
520	<	#       umodes = locops, servnotice, operwall, wallop;
520	>	umodes = locops, servnotice, wallop;
521
522		/*
523	<	* privileges: controls the activities and commands an oper is
524	<	* allowed to do on the server. All options default to no.
523	>	* privileges: controls the activities and commands an oper is
524	>	* allowed to do on the server. All options default to 'no'.
525		* Available options:
526		*
527	<	* module       - allows MODULE
528	<	* global_kill  - allows remote users to be /KILL'd
529	<	* remote       - allows remote SQUIT and CONNECT
530	<	* remoteban    - allows remote KLINE/UNKLINE
531	<	* dline        - allows DLINE
532	<	* undline      - allows UNDLINE
533	<	* kline        - allows KILL and KLINE
534	<	* unkline      - allows UNKLINE
535	<	* gline        - allows GLINE
536	<	* xline        - allows XLINE
537	<	* globops      - allows GLOBOPS
538	<	* operwall     - allows OPERWALL
539	<	* nick_changes - allows oper to see nickchanges via usermode +n
540	<	* rehash       - allows oper to REHASH config
541	<	* die          - allows DIE
542	<	* restart      - allows RESTART
543	<	* set          - allows SET
544	<	* admin        - gives admin privileges. admins for example,
545	<	*                may see the real IP addresses of servers.
527	>	* module         - allows MODULE
528	>	* connect        - allows local CONNECT              | ('P' flag)
529	>	* connect:remote - allows remote CONNECT             | ('Q' flag)
530	>	* squit          - allows local SQUIT                | ('R' flag)
531	>	* squit:remote   - allows remote SQUIT               | ('S' flag)
532	>	* kill           - allows to KILL local clients      | ('N' flag)
533	>	* kill:remote    - allows remote users to be /KILL'd | ('O' flag)
534	>	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
535	>	* dline          - allows DLINE                      |
536	>	* undline        - allows UNDLINE                    |
537	>	* kline          - allows KLINE                      | ('K' flag)
538	>	* unkline        - allows UNKLINE                    | ('U' flag)
539	>	* gline          - allows GLINE                      | ('G' flag)
540	>	* xline          - allows XLINE                      | ('X' flag)
541	>	* unxline        - allows UNXLINE                    |
542	>	* locops         - allows LOCOPS                     |
543	>	* globops        - allows GLOBOPS                    |
544	>	* wallops        - allows WALLOPS                    |
545	>	* rehash         - allows oper to REHASH config      | ('H' flag)
546	>	* die            - allows DIE                        | ('D' flag)
547	>	* restart        - allows RESTART                    |
548	>	* set            - allows SET                        |
549	>	* admin          - gives administrator privileges    | ('A' flag)
550		*/
551	<	flags = global_kill, remote, kline, unkline, xline, globops, restart,
552	<	die, rehash, nick_changes, admin, operwall, module;
551	>	flags = kill, kill:remote, connect, connect:remote, kline, unkline,
552	>	xline, globops, restart, die, rehash, admin, module;
553		};
554
555		/*
556	<	* service {}: specifies what server may act as a network service
556	>	* service {}: specifies a server which may act as a network service
557		*
558	<	* NOTE: it is absolutely important that every single server on the network
558	>	* NOTE: it is very important that every server on the network
559		*       has the same service{} block.
560		*/
561		service {
#	Line 512 | Line 564 | service {
564		};
565
566		/*
567	<	* connect {}:  controls servers we connect to
567	>	* connect {}: define a server to connect to
568		*/
569		connect {
570	<	/* name: the name of the server */
570	>	/* name: the name of the server. */
571		name = "irc.uplink.com";
572
573		/*
574	<	* host: the host or IP to connect to.  If a hostname is used it
575	<	* must match the reverse dns of the server.
574	>	* host: the host or IP address to connect to. If a hostname is used it
575	>	* must match the reverse DNS of the server.
576		*/
577		host = "192.168.0.1";
578
579		/*
580	<	* vhost: the IP to bind to when we connect outward to servers.
580	>	* vhost: the IP address to bind to when making outgoing connections to
581	>	* servers.
582		* serverinfo::vhost and serverinfo::vhost6 will be overridden
583		* by this directive.
584		*/
585		vhost = "192.168.0.2";
586
587		/*
588	<	* passwords: the passwords we send (OLD C:) and accept (OLD N:).
589	<	* The remote server will have these passwords reversed.
588	>	* passwords: the passwords to send (OLD C:) and accept (OLD N:).
589	>	* The remote server will have these passwords swapped.
590		*/
591		send_password = "password";
592		accept_password = "anotherpassword";
#	Line 544 | Line 597 | connect {
597		*/
598		encrypted = no;
599
600	<	/* port: the port to connect to this server on */
600	>	/* port: the port to connect to this server on. */
601		port = 6666;
602
603		/*
604	<	* hub_mask: the mask of servers that this server may hub.  Multiple
605	<	* entries are permitted
604	>	* hub_mask: the mask of servers that this server may hub. Multiple
605	>	* entries are permitted.
606		*/
607		hub_mask = "*";
608
609		/*
610	<	* leaf_mask: the mask of servers this server may not hub.  Multiple
611	<	* entries are permitted.  Useful for forbidding EU -> US -> EU routes.
610	>	* leaf_mask: the mask of servers this server may not hub. Multiple
611	>	* entries are permitted. Useful for forbidding EU -> US -> EU routes.
612		*/
613		#       leaf_mask = "*.uk";
614
615	<	/* class: the class this server is in */
615	>	/* class: the class this server is in. */
616		class = "server";
617
618		/*
619	<	* ssl_cipher_list:
620	<	*
621	<	* List of ciphers that the server we are connecting to must support.
569	<	* If the server isn't capable of any cipher listed below, the
570	<	* connection will simply be rejected.
619	>	* ssl_cipher_list: list of ciphers that the server we are connecting to
620	>	* must support. If the server is not capable of using any of the ciphers
621	>	* listed below, the connection will simply be rejected.
622		* Can be used to enforce stronger ciphers, even though this option
623		* is not necessarily required to establish a SSL/TLS connection.
624		*
625		* Multiple ciphers are separated by colons. The order of preference
626		* is from left to right.
627		*/
628	<	#ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
628	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
629	>
630	>	/*
631	>	* ssl_certificate_fingerprint: enhances security by additionally checking
632	>	* the server's client certificate fingerprint against the specified
633	>	* fingerprint below.
634	>	*/
635	>	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
636
637		/*
638		* autoconn   - controls whether we autoconnect to this server or not,
#	Line 605 | Line 663 | connect {
663		*/
664		cluster {
665		/*
666	<	* name: the server to share with, this can take wildcards
666	>	* name: the server to share with; this can take wildcards
667		*
668	<	* NOTE: only local actions will be clustered, meaning if
668	>	* NOTE: only local actions will be clustered, meaning that if
669		*       the server receives a shared kline/unkline/etc, it
670		*       will not be propagated to clustered servers.
671		*
#	Line 618 | Line 676 | cluster {
676		name = "*.arpa";
677
678		/*
679	<	* type: list of what to share, options are as follows:
679	>	* type: list of what to share; options are as follows:
680		*      dline   - share dlines
681		*      undline - share undlines
682		*      kline   - share klines
#	Line 636 | Line 694 | cluster {
694		/*
695		* shared {}: users that are allowed to remote kline
696		*
697	<	* NOTE: This can be effectively used for remote klines.
697	>	* NOTE: This can effectively be used for remote klines.
698		*       Please note that there is no password authentication
699	<	*       for users setting remote klines.  You must also be
699	>	*       for users setting remote klines. You must also be
700		*       /oper'd in order to issue a remote kline.
701		*/
702		shared {
703		/*
704	<	* name: the server the user must be on to set klines.  If this is not
705	<	* specified, the user will be allowed to kline from all servers.
704	>	* name: the server the user must be connected to in order to set klines.
705	>	* If this is not specified, the user will be allowed to kline from all
706	>	* servers.
707		*/
708		name = "irc2.some.server";
709
710		/*
711	<	* user: the user@host mask that is allowed to set klines.  If this is
711	>	* user: the user@host mask that is allowed to set klines. If this is
712		* not specified, all users on the server above will be allowed to set
713		* a remote kline.
714		*/
#	Line 680 | Line 739 | kill {
739		reason = "Obviously hacked account";
740		};
741
683	–	kill {
684	–	user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
685	–
686	–	/*
687	–	* NOTE: You have to set type=regex; when using a regular expression
688	–	* based user entry
689	–	*/
690	–	type = regex;
691	–	};
692	–
742		/*
743	<	* deny {}:  IPs that are not allowed to connect (before DNS/ident lookup)
743	>	* deny {}:  IP addresses that are not allowed to connect
744	>	* (before DNS/ident lookup)
745		* Oper issued dlines will be added to the specified dline config
746		*/
747		deny {
#	Line 700 | Line 750 | deny {
750		};
751
752		/*
753	<	* exempt {}: IPs that are exempt from deny {} and Dlines
753	>	* exempt {}:  IP addresses that are exempt from deny {} and Dlines
754		*/
755		exempt {
756		ip = "192.168.0.0/16";
#	Line 709 | Line 759 | exempt {
759		/*
760		* resv {}:  nicks and channels users may not use/join
761		*/
762	<	resv { nick = "clone*"; reason = "Clone bots"; };
763	<	resv { nick = "NickServ"; reason = "Reserved for services"; };
764	<	resv { nick = "OperServ"; reason = "Reserved for services"; };
765	<	resv { nick = "MemoServ"; reason = "Reserved for services"; };
766	<	resv { nick = "BotServ"; reason = "Reserved for services"; };
767	<	resv { nick = "HelpServ"; reason = "Reserved for services"; };
768	<	resv { nick = "HostServ"; reason = "Reserved for services"; };
769	<	resv { nick = "StatServ"; reason = "Reserved for services"; };
770	<	resv { channel = "#*services*"; reason = "Reserved for services"; };
762	>	resv { mask = "clone*"; reason = "Clone bots"; };
763	>	resv { mask = "Global"; reason = "Reserved for services"; };
764	>	resv { mask = "ChanServ"; reason = "Reserved for services"; };
765	>	resv { mask = "NickServ"; reason = "Reserved for services"; };
766	>	resv { mask = "OperServ"; reason = "Reserved for services"; };
767	>	resv { mask = "MemoServ"; reason = "Reserved for services"; };
768	>	resv { mask = "BotServ"; reason = "Reserved for services"; };
769	>	resv { mask = "HelpServ"; reason = "Reserved for services"; };
770	>	resv { mask = "HostServ"; reason = "Reserved for services"; };
771	>	resv { mask = "StatServ"; reason = "Reserved for services"; };
772	>	resv { mask = "#*services*"; reason = "Reserved for services"; };
773	>
774	>	resv {
775	>	/*
776	>	* mask: masks starting with a '#' are automatically considered
777	>	* as channel name masks.
778	>	*/
779	>	mask = "#helsinki";
780	>	reason = "Channel is reserved for Finnish inhabitants";
781	>
782	>	/*
783	>	* exempt: can be either a ISO 3166 alpha-2 two letter country
784	>	* code, or a nick!user@host mask. CIDR is supported. Exempt
785	>	* entries can be stacked.
786	>	*/
787	>	exempt = "FI";
788	>	};
789
790		/*
791	<	* gecos {}:  The X: replacement, used for banning users based on
724	<	* their "realname".
791	>	* gecos {}:  Used for banning users based on their "realname".
792		*/
793		gecos {
794		name = "*sex*";
#	Line 733 | Line 800 | gecos {
800		reason = "Trojan drone";
801		};
802
736	–	gecos {
737	–	name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
738	–
739	–	/*
740	–	* NOTE: You have to set type=regex; when using a regular expression
741	–	* based name entry
742	–	*/
743	–	type = regex;
744	–	};
745	–
803		/*
804		* channel {}:  The channel block contains options pertaining to channels
805		*/
806		channel {
807		/*
808		* disable_fake_channels: this option, if set to 'yes', will
809	<	* disallow clients to create or join channels that have one
809	>	* disallow clients from creating or joining channels that have one
810		* of the following ASCII characters in their name:
811		*
812		*   2 | bold
#	Line 763 | Line 820 | channel {
820		disable_fake_channels = yes;
821
822		/*
823	<	* restrict_channels: reverse channel RESVs logic, only reserved
824	<	* channels are allowed
823	>	* invite_client_count, invite_client_time: how many INVITE commands
824	>	* are permitted per client per invite_client_time.
825		*/
826	<	restrict_channels = no;
826	>	invite_client_count = 10;
827	>	invite_client_time = 5 minutes;
828
829		/*
830	<	* knock_delay: The amount of time a user must wait between issuing
831	<	* the knock command.
830	>	* knock_client_count, knock_client_time: how many KNOCK commands
831	>	* are permitted per client per knock_client_time.
832		*/
833	<	knock_delay = 5 minutes;
833	>	knock_client_count = 1;
834	>	knock_client_time = 5 minutes;
835
836		/*
837	<	* knock_delay_channel: How often a knock to any specific channel
838	<	* is permitted, regardless of the user sending the knock.
837	>	* knock_delay_channel: how often a KNOCK to any specific channel
838	>	* is permitted, regardless of the user sending the KNOCK.
839		*/
840		knock_delay_channel = 1 minute;
841
842		/*
843	<	* max_chans_per_user: The maximum number of channels a user can
844	<	* join/be on.
786	<	*/
787	<	max_chans_per_user = 25;
788	<
789	<	/*
790	<	* max_chans_per_oper: The maximum number of channels an oper can
791	<	* join/be on.
843	>	* max_channels: the maximum number of channels a user can join/be on.
844	>	* This is a default value which can be overriden with class{} blocks.
845		*/
846	<	max_chans_per_oper = 50;
794	<
795	<	/* quiet_on_ban: stop banned people talking in channels. */
796	<	quiet_on_ban = yes;
846	>	max_channels = 25;
847
848		/* max_bans: maximum number of +b/e/I modes in a channel */
849		max_bans = 100;
850
851		/*
852	<	* how many joins in how many seconds constitute a flood, use 0 to
852	>	* how many joins in how many seconds constitute a flood. Use 0 to
853		* disable. +b opers will be notified (changeable via /set)
854		*/
855		join_flood_count = 16;
856		join_flood_time = 8 seconds;
857
858		/*
859	<	* splitcode: The ircd will now check splitmode every few seconds.
859	>	* The ircd will now check splitmode (whether a server is split from
860	>	* the network) every few seconds; this functionality is known as
861	>	* splitcode and is influenced by the options below.
862		*
863		* Either split users or split servers can activate splitmode, but
864		* both conditions must be met for the ircd to deactivate splitmode.
865	<	*
865	>	*
866		* You may force splitmode to be permanent by /quote set splitmode on
867		*/
868
869		/*
870		* default_split_user_count: when the usercount is lower than this level,
871	<	* consider ourselves split.  This must be set for automatic splitmode.
871	>	* consider ourselves split. This must be set for automatic splitmode.
872		*/
873		default_split_user_count = 0;
874
875		/*
876		* default_split_server_count: when the servercount is lower than this,
877	<	* consider ourselves split.  This must be set for automatic splitmode.
877	>	* consider ourselves split. This must be set for automatic splitmode.
878		*/
879		default_split_server_count = 0;
880
881	<	/* no_create_on_split: disallow users creating channels on split. */
881	>	/* no_create_on_split: do not allow users to create channels on split. */
882		no_create_on_split = yes;
883
884	<	/* no_join_on_split: disallow users joining channels at all on a split. */
884	>	/* no_join_on_split: do not allow users to join channels on a split. */
885		no_join_on_split = no;
886		};
887
888		/*
889		* serverhide {}:  The serverhide block contains the options regarding
890	<	* serverhiding
890	>	* to server hiding. For more information regarding server hiding,
891	>	* please see doc/serverhide.txt
892		*/
893		serverhide {
894		/*
895	+	* disable_remote_commands: disable users issuing commands
896	+	* on remote servers.
897	+	*/
898	+	disable_remote_commands = no;
899	+
900	+	/*
901		* flatten_links: this option will show all servers in /links appear
902	<	* that they are linked to this current server
902	>	* as though they are linked to this current server.
903		*/
904		flatten_links = no;
905
#	Line 852 | Line 911 | serverhide {
911
912		/*
913		* hidden: hide this server from a /links output on servers that
914	<	* support it.  This allows hub servers to be hidden etc.
914	>	* support it. This allows hub servers to be hidden etc.
915		*/
916		hidden = no;
917
#	Line 863 | Line 922 | serverhide {
922		hide_servers = no;
923
924		/*
925	+	* hide_services: define this if you want to hide the location of
926	+	* services servers that are specified in the service{} block.
927	+	*/
928	+	hide_services = no;
929	+
930	+	/*
931		* Use this as the servername users see if hide_servers = yes.
932		*/
933		hidden_name = "*.hidden.com";
934
935		/*
936		* hide_server_ips: If this is disabled, opers will be unable to see
937	<	* servers ips and will be shown a masked ip, admins will be shown the
938	<	* real ip.
937	>	* servers' IP addresses and will be shown a masked IP address; admins
938	>	* will be shown the real IP address.
939		*
940	<	* If this is enabled, nobody can see a servers ip. *This is a kludge*,
941	<	* it has the side effect of hiding the ips everywhere, including
942	<	* logfiles.
940	>	* If this is enabled, nobody can see a server's IP address.
941	>	* *This is a kludge*: it has the side effect of hiding the IP addresses
942	>	* everywhere, including logfiles.
943		*
944		* We recommend you leave this disabled, and just take care with who you
945		* give administrator privileges to.
#	Line 887 | Line 952 | serverhide {
952		* compiled in options in config.h
953		*/
954		general {
955	<	/* services_name: servername of nick/channel services */
955	>	/*
956	>	* cycle_on_host_change: sends a fake QUIT/JOIN combination
957	>	* when services change the hostname of a specific client.
958	>	*/
959	>	cycle_on_host_change = yes;
960	>
961	>	/* services_name: servername of nick/channel services. */
962		services_name = "service.someserver";
963
964		/* max_watch: maximum WATCH entries a client can have. */
965	<	max_watch = 60;
965	>	max_watch = 30;
966
967	<	/* gline_enable: enable glines, network wide temp klines */
967	>	/* max_accept: maximum allowed /accept's for +g usermode. */
968	>	max_accept = 30;
969	>
970	>	/* gline_enable: enable glines (network-wide temporary klines). */
971		gline_enable = yes;
972
973		/*
974	<	* gline_duration: the amount of time a gline will remain on your
975	<	* server before expiring
974	>	* gline_duration: the amount of time a G-line will remain on your
975	>	* server before expiring.
976		*/
977		gline_duration = 1 day;
978
979		/*
980	<	* gline_request_duration:  how long a pending G-line can be around.
981	<	* 10 minutes should be plenty
980	>	* gline_request_duration: how long a pending G-line can be around.
981	>	* 10 minutes should be plenty.
982		*/
983		gline_request_duration = 10 minutes;
984
985		/*
986		* gline_min_cidr: the minimum required length of a CIDR bitmask
987	<	* for IPv4 based glines
987	>	* for IPv4 based G-lines.
988		*/
989		gline_min_cidr = 16;
990
991		/*
992		* gline_min_cidr6: the minimum required length of a CIDR bitmask
993	<	* for IPv6 based glines
993	>	* for IPv6 based G-lines.
994		*/
995		gline_min_cidr6 = 48;
996
997		/*
998	<	* Whether to automatically set mode +i on connecting users.
998	>	* invisible_on_connect: whether to automatically set mode +i on
999	>	* connecting users.
1000		*/
1001		invisible_on_connect = yes;
1002
1003		/*
1004	<	* Max time from the nickname change that still causes KILL
1005	<	* automatically to switch for the current nick of that user.
1004	>	* kill_chase_time_limit: KILL chasing is a feature whereby a KILL
1005	>	* issued for a user who has recently changed nickname will be applied
1006	>	* automatically to the new nick. kill_chase_time_limit is the maximum
1007	>	* time following a nickname change that this chasing will apply.
1008		*/
1009	<	kill_chase_time_limit = 90 seconds;
1009	>	kill_chase_time_limit = 30 seconds;
1010
1011		/*
1012	<	* If hide_spoof_ips is disabled, opers will be allowed to see the real
1013	<	* IP of spoofed users in /trace etc. If this is defined they will be
1014	<	* shown a masked IP.
1012	>	* hide_spoof_ips: if disabled, opers will be allowed to see the real
1013	>	* IP address of spoofed users in /trace etc. If this is defined they
1014	>	* will be shown a masked IP.
1015		*/
1016		hide_spoof_ips = yes;
1017
1018		/*
1019	<	* Ignore bogus timestamps from other servers.  Yes, this will desync
1020	<	* the network, but it will allow chanops to resync with a valid non TS 0
1019	>	* ignore_bogus_ts: ignore bogus timestamps from other servers.
1020	>	* Yes, this will desync the network, but it will allow chanops
1021	>	* to resync with a valid non TS 0.
1022		*
1023		* This should be enabled network wide, or not at all.
1024		*/
#	Line 952 | Line 1030 | general {
1030		*/
1031		disable_auth = no;
1032
955	–	/* disable_remote_commands: disable users doing commands on remote servers */
956	–	disable_remote_commands = no;
957	–
1033		/*
1034		* tkline_expire_notices: enables or disables temporary kline/xline
1035		* expire notices.
#	Line 963 | Line 1038 | general {
1038
1039		/*
1040		* default_floodcount: the default value of floodcount that is configurable
1041	<	* via /quote set floodcount.  This is the amount of lines a user
1042	<	* may send to any other user/channel in one second.
1041	>	* via /quote set floodcount. This is the number of lines a user may send
1042	>	* to any other user/channel in one second.
1043		*/
1044		default_floodcount = 10;
1045
1046		/*
1047	<	* failed_oper_notice: send a notice to all opers on the server when
1047	>	* failed_oper_notice: send a notice to all opers on the server when
1048		* someone tries to OPER and uses the wrong password, host or ident.
1049		*/
1050		failed_oper_notice = yes;
1051
1052		/*
1053	<	* dots_in_ident: the amount of '.' characters permitted in an ident
1053	>	* dots_in_ident: the number of '.' characters permitted in an ident
1054		* reply before the user is rejected.
1055		*/
1056		dots_in_ident = 2;
1057
1058		/*
1059	<	* min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1060	<	* placed via the server.  klines hand placed are exempt from limits.
1061	<	* wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1059	>	* min_nonwildcard: the minimum number of non-wildcard characters in
1060	>	* k/d/g lines placed via the server. K-lines hand-placed are exempt from
1061	>	* this limit.
1062	>	* Wildcard characters: '.', ':', '*', '?', '@', '!'
1063		*/
1064		min_nonwildcard = 4;
1065
1066		/*
1067	<	* min_nonwildcard_simple: the minimum non wildcard characters in
1068	<	* gecos bans.  wildcard chars: '*' '?' '#'
1067	>	* min_nonwildcard_simple: the minimum number of non-wildcard characters
1068	>	* in gecos bans. Wildcard characters: '*', '?'
1069		*/
1070		min_nonwildcard_simple = 3;
1071
1072	<	/* max_accept: maximum allowed /accept's for +g usermode */
997	<	max_accept = 20;
998	<
999	<	/* anti_nick_flood: enable the nickflood control code */
1072	>	/* anti_nick_flood: enable the nickflood control code. */
1073		anti_nick_flood = yes;
1074
1075	<	/* nick flood: the nick changes allowed in the specified period */
1075	>	/* nick flood: the number of nick changes allowed in the specified period. */
1076		max_nick_time = 20 seconds;
1077		max_nick_changes = 5;
1078
#	Line 1010 | Line 1083 | general {
1083		anti_spam_exit_message_time = 5 minutes;
1084
1085		/*
1086	<	* ts delta: the time delta allowed between server clocks before
1087	<	* a warning is given, or before the link is dropped.  all servers
1088	<	* should run ntpdate/rdate to keep clocks in sync
1086	>	* ts_warn_delta, ts_max_delta: the time delta allowed between server
1087	>	* clocks before a warning is given, or before the link is dropped.
1088	>	* All servers should run ntpdate/rdate to keep clocks in sync.
1089		*/
1090	<	ts_warn_delta = 30 seconds;
1091	<	ts_max_delta = 5 minutes;
1090	>	ts_warn_delta = 10 seconds;
1091	>	ts_max_delta = 2 minutes;
1092
1093		/*
1094	<	* warn_no_nline: warn opers about servers that try to connect but
1095	<	* we don't have a connect {} block for.  Twits with misconfigured
1096	<	* servers can get really annoying with this enabled.
1094	>	* warn_no_connect_block: warn opers about servers that try to connect
1095	>	* but for which we don't have a connect {} block. Twits with
1096	>	* misconfigured servers can become really annoying with this enabled.
1097		*/
1098	<	warn_no_nline = yes;
1098	>	warn_no_connect_block = yes;
1099
1100		/*
1101		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1102	<	* operators and administrators.  Doing so is a good idea in case
1103	<	* there are any exempted (exempt{}) server IPs you don't want to
1102	>	* operators and administrators. Doing so is a good idea in case
1103	>	* there are any exempted (exempt {}) server IPs you don't want to
1104		* see leaked.
1105		*/
1106		stats_e_disabled = no;
1107
1108	<	/* stats_o_oper only: make stats o (opers) oper only */
1108	>	/* stats_o_oper_only: make stats o (opers) oper only. */
1109		stats_o_oper_only = yes;
1110
1111	<	/* stats_P_oper_only: make stats P (ports) oper only */
1111	>	/* stats_P_oper_only: make stats P (ports) oper only. */
1112		stats_P_oper_only = yes;
1113
1114	+	/* stats_u_oper_only: make stats u (uptime) oper only. */
1115	+	stats_u_oper_only = no;
1116	+
1117		/*
1118	<	* stats i oper only: make stats i (auth {}) oper only. set to:
1119	<	*     yes:    show users no auth blocks, made oper only.
1120	<	*     masked: show users first matching auth block
1121	<	*     no:     show users all auth blocks.
1118	>	* stats_i_oper_only: make stats i (auth {}) oper only. Set to:
1119	>	*     yes    - show users no auth blocks, made oper only.
1120	>	*     masked - show users the first matching auth block
1121	>	*     no     - show users all auth blocks.
1122		*/
1123		stats_i_oper_only = yes;
1124
1125		/*
1126	<	* stats_k_oper_only: make stats k/K (klines) oper only.  set to:
1127	<	*     yes:    show users no auth blocks, made oper only
1128	<	*     masked: show users first matching auth block
1129	<	*     no:     show users all auth blocks.
1126	>	* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1127	>	*     yes    - show users no auth blocks, made oper only
1128	>	*     masked - show users the first matching auth block
1129	>	*     no     - show users all auth blocks.
1130		*/
1131		stats_k_oper_only = yes;
1132
#	Line 1067 | Line 1143 | general {
1143		opers_bypass_callerid = no;
1144
1145		/*
1146	<	* pace_wait_simple: time between use of less intensive commands
1147	<	* (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1146	>	* pace_wait_simple: minimum time required between use of less
1147	>	* intensive commands
1148	>	* (ADMIN, HELP, LUSERS, VERSION, remote WHOIS)
1149		*/
1150		pace_wait_simple = 1 second;
1151
1152		/*
1153	<	* pace_wait: time between more intensive commands
1154	<	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1153	>	* pace_wait: minimum time required between use of more intensive commands
1154	>	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, WHOWAS)
1155		*/
1156		pace_wait = 10 seconds;
1157
1158		/*
1159	<	* short_motd: send clients a notice telling them to read the motd
1160	<	* instead of forcing a motd to clients who may simply ignore it.
1159	>	* short_motd: send clients a notice telling them to read the MOTD
1160	>	* instead of forcing an MOTD to clients who may simply ignore it.
1161		*/
1162		short_motd = no;
1163
1164		/*
1165	<	* ping_cookie: require clients to respond exactly to a ping command,
1165	>	* ping_cookie: require clients to respond exactly to a PING command,
1166		* can help block certain types of drones and FTP PASV mode spoofing.
1167		*/
1168		ping_cookie = no;
#	Line 1095 | Line 1172 | general {
1172
1173		/*
1174		* true_no_oper_flood: completely eliminate flood limits for opers
1175	<	* and for clients with can_flood = yes in their auth {} blocks
1175	>	* and for clients with 'can_flood' in their auth {} blocks.
1176		*/
1177		true_no_oper_flood = yes;
1178
1179	<	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1179	>	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1180		oper_pass_resv = yes;
1181
1182	<	/* REMOVE ME.  The following line checks you've been reading. */
1182	>	/* REMOVE ME. The following line checks that you have been reading. */
1183		havent_read_conf = 1;
1184
1185		/*
1186	<	* max_targets: the maximum amount of targets in a single
1187	<	* PRIVMSG/NOTICE.  Set to 999 NOT 0 for unlimited.
1186	>	* max_targets: the maximum number of targets in a single
1187	>	* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1188		*/
1189		max_targets = 4;
1190
1191		/*
1115	–	* message_locale: the default message locale
1116	–	* Use "standard" for the compiled in defaults.
1117	–	* To install the translated messages, go into messages/ in the
1118	–	* source directory and run `make install'.
1119	–	*/
1120	–	message_locale = "standard";
1121	–
1122	–	/*
1192		* usermodes configurable: a list of usermodes for the options below
1193		*
1194		* +b - bots         - See bot and drone flooding notices
1195		* +c - cconn        - Client connection/quit notices
1127	–	* +C - cconn_full   - Client connection/quit notices full
1196		* +D - deaf         - Don't receive channel messages
1197		* +d - debug        - See debugging notices
1198		* +e - external     - See remote server connection and split notices
1199	+	* +F - farconnect   - Remote client connection/quit notices
1200		* +f - full         - See auth{} block full notices
1201		* +G - softcallerid - Server Side Ignore for users not on your channels
1202		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1203		* +H - hidden       - Hides operator status to other users
1204	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
1136	<	*                     a channel
1204	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
1205		* +j - rej          - See rejected client notices
1206		* +k - skill        - See server generated KILL messages
1207		* +l - locops       - See LOCOPS messages
1208		* +n - nchange      - See client nick changes
1209	+	* +p - hidechans    - Hides channel list in WHOIS
1210	+	* +q - hideidle     - Hides idle and signon time in WHOIS
1211	+	* +R - nononreg     - Only receive private messages from registered clients
1212		* +s - servnotice   - See general server notices
1213		* +u - unauth       - See unauthorized client notices
1214		* +w - wallop       - See server generated WALLOPS
1215		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1145	–	* +z - operwall     - See oper generated WALLOPS
1216		*/
1217
1218	<	/* oper_only_umodes: usermodes only opers may set */
1219	<	oper_only_umodes = bots, cconn, cconn_full, debug, full, hidden, skill,
1220	<	nchange, rej, spy, external, operwall,
1221	<	locops, unauth;
1218	>	/* oper_only_umodes: usermodes only opers may set. */
1219	>	oper_only_umodes = bots, cconn, debug, full, hidden, skill,
1220	>	nchange, rej, spy, external,
1221	>	locops, unauth, farconnect;
1222
1223	<	/* oper_umodes: default usermodes opers get when they /oper */
1224	<	oper_umodes = bots, locops, servnotice, operwall, wallop;
1223	>	/* oper_umodes: default usermodes opers get when they /oper or /challenge. */
1224	>	oper_umodes = bots, locops, servnotice, wallop;
1225
1226		/*
1227	<	* use_egd: if your system does not have *random devices yet you
1228	<	* want to use OpenSSL and encrypted links, enable this.  Beware -
1159	<	* EGD is *very* CPU intensive when gathering data for its pool
1227	>	* throttle_count: the maximum number of connections from the same
1228	>	* IP address allowed in throttle_time duration.
1229		*/
1230	<	#       use_egd = yes;
1230	>	throttle_count = 1;
1231
1232		/*
1233	<	* egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1234	<	* which automatically finds the path.
1235	<	*/
1236	<	#       egdpool_path = "/var/run/egd-pool";
1168	<
1169	<	/*
1170	<	* throttle_time: the minimum amount of time between connections from
1171	<	* the same ip.  exempt {} blocks are excluded from this throttling.
1172	<	* Offers protection against flooders who reconnect quickly.
1233	>	* throttle_time: the minimum amount of time required between
1234	>	* connections from the same IP address. exempt {} blocks are
1235	>	* excluded from this throttling.
1236	>	* Offers protection against flooders who reconnect quickly.
1237		* Set to 0 to disable.
1238		*/
1239	<	throttle_time = 10;
1239	>	throttle_time = 2 seconds;
1240		};
1241
1242		modules {
#	Line 1180 | Line 1244 | modules {
1244		* path: other paths to search for modules specified below
1245		* and in "/module load".
1246		*/
1247	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1248	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1247	>	path = "lib/ircd-hybrid/modules";
1248	>	path = "lib/ircd-hybrid/modules/autoload";
1249
1250	<	/* module: the name of a module to load on startup/rehash */
1251	<	#module = "some_module.la";
1250	>	/* module: the name of a module to load on startup/rehash. */
1251	>	#       module = "some_module.la";
1252		};
1253
1254		/*
#	Line 1196 | Line 1260 | log {
1260
1261		file {
1262		type = oper;
1263	<	name = "/home/ircd/var/log/oper.log";
1263	>	name = "var/log/oper.log";
1264		size = unlimited;
1265		};
1266
1267		file {
1268		type = user;
1269	<	name = "/home/ircd/var/log/user.log";
1269	>	name = "var/log/user.log";
1270		size = 50 megabytes;
1271		};
1272
1273		file {
1274		type = kill;
1275	<	name = "/home/ircd/var/log/kill.log";
1275	>	name = "var/log/kill.log";
1276		size = 50 megabytes;
1277		};
1278
1279		file {
1280		type = kline;
1281	<	name = "/home/ircd/var/log/kline.log";
1281	>	name = "var/log/kline.log";
1282		size = 50 megabytes;
1283		};
1284
1285		file {
1286		type = dline;
1287	<	name = "/home/ircd/var/log/dline.log";
1287	>	name = "var/log/dline.log";
1288		size = 50 megabytes;
1289		};
1290
1291		file {
1292		type = gline;
1293	<	name = "/home/ircd/var/log/gline.log";
1293	>	name = "var/log/gline.log";
1294	>	size = 50 megabytes;
1295	>	};
1296	>
1297	>	file {
1298	>	type = xline;
1299	>	name = "var/log/xline.log";
1300	>	size = 50 megabytes;
1301	>	};
1302	>
1303	>	file {
1304	>	type = resv;
1305	>	name = "var/log/resv.log";
1306		size = 50 megabytes;
1307		};
1308
1309		file {
1310		type = debug;
1311	<	name = "/home/ircd/var/log/debug.log";
1311	>	name = "var/log/debug.log";
1312		size = 50 megabytes;
1313		};
1314		};

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)