ViewVC Help
View File | Revision Log | Show Annotations | View Changeset | Root Listing
root/svn/ircd-hybrid/branches/8.2.x/NEWS
(Generate patch)

Comparing:
ircd-hybrid-7.2/RELNOTES (file contents), Revision 855 by db, Mon Feb 26 22:06:45 2007 UTC vs.
ircd-hybrid/branches/8.2.x/NEWS (file contents), Revision 9024 by michael, Tue May 28 11:16:27 2019 UTC

# Line 1 | Line 1
1 < -- ircd-hybrid-7.2.3 RELNOTES
2 < o) Added ircd-italian.lang language file
3 < o) Added -full to etrace
4 < o) Added +C for opers
5 < o) Fixed core in temp channel resv
6 <
7 < -- ircd-hybrid-7.2.2 RELNOTES
8 < o) Added channel::disable_fake_channels config directive
9 < o) Fixed broken FORCEJOIN  (contrib)
10 < o) Added missing documentation for connect::vhost
11 < o) Fixed problem with G-Line voting
12 < o) Fixed "STATS ?" so it doesn't report negative traffic statistics
13 < o) Fixed core in m_mkpasswd.c  (contrib)
14 < o) Reduced memory usage for channel members
15 < o) Added general::stats_e_disabled which simply disables "STATS e"
16 <   for other operators and administrators
17 < o) Ignore signal SIGXFSZ to prevent the daemon from dying on missconfigured
18 <   file size limits
19 < o) Slight optimizations to the block allocator
20 < o) Fixed harmless bug that could result in incorrect bytes sent statistics
21 <   in "STATS t"
22 < o) "STATS y|Y" now shows whether a class is active or disabled
23 < o) Added ircd-brazilian_pt.lang language file
24 < o) Misc. ACCEPT fixes. E.g. don't remove an accept record if a client is
25 <   changing between equivalent nicknames like 'nick' and 'NiCk'.
26 < o) Minor resolv.conf parser fixes.  Added missing support for ';' comments
27 < o) Fixed core on MODRESTART
28 <
29 <
30 < -- ircd-hybrid-7.2.1 RELNOTES
31 < o) Fixed build on SRV4
32 < o) Fixed problem where ircd would disconnect all SSL connections
33 < o) Added initial CAP support.  Additional documentation can be found
34 <   in doc/technical
35 < o) Speeded up command parsing
36 < o) Fixed occasional core dump on UN*LINE
37 < o) Fixed bug where particular clients would always receive
38 <   "Load is temporarily too heavy" message
39 < o) Improved memory consumption, i.e. memory consumption has
40 <   been reduced for remote clients
41 < o) Fixed possible core in case default_cipher_preference directive isn't set
42 < o) Fixed "CHANSERV INVITE" bug with anope services
43 < o) Updated example configuration files to reflect new topicburst flags
44 <   directive in connect{} blocks
45 < o) Fixed core if using the operator::umodes directive
46 < o) Don't allow shared k-lines to be set without a valid reason
47 < o) Improved channel ban match processing.  This also fixes CIDR bans
48 <
49 <
50 < -- ircd-hybrid-7.2.0 RELNOTES
51 < o) Fixed broken operwall = yes;
52 < o) Added 'umode' directive to oper{}.  List of modes to get on /OPER.
53 <   This behaves exactly like H6's sixth O line field
54 < o) Fixed a WHOIS bug
55 < o) Fixed bug where we would increase Count.invisi even
56 <   if general::invisible_on_connect is turned off
57 < o) Removed invite_ops_only, controlled by paranoid (+p) now
58 < o) Better DDoS protection
59 < o) Fixed va_list bug on amd64
60 < o) Fixed /dev/poll
61 <
62 <
63 < -- ircd-hybrid-7.2rc1 RELNOTES
64 < o) ircd can dynamically change all its client/fd limits at runtime
65 < o) Added epoll as the primary I/O engine under Linux
66 < o) Local channels will not show up in remote /WHOIS
67 < o) Added hidden_name which allows customized hidden server names
68 < o) Added restrict_channels to define a static channel set
69 < o) Added --disable-gline-voting to disable G-Line votes
70 <   for small networks or people who don't want it.
71 < o) Allow accumulating more ip= entries in an exempt{} block
72 < o) Various improvements and bugfixes
73 < o) Make win32 build usable
74 < o) Fixed ban caching bug
75 < o) Cosmetical fixes to TIME
76 < o) Get "KLINE nick" to work with clients that have a spoof
77 < o) Fixed RESV/XLINE bug in conjunction with names that include escaped
78 <   characters such as \*, \?, \#.
79 <
80 <
81 < -- ircd-hybrid-7.2beta1 RELNOTES
82 < o) Usermode +G, like +g, but allow messaging from people on common channels
83 < o) Usermode +D - "deaf", don't receive channel messages
84 < o) RXLINE and RKLINE - commands for setting perl compatible regular expression
85 <   based K and X lines
86 < o) Join flood is now detected and reported to +b opers
87 < o) Re-added REJECT_HOLD - lock clients for a while before throwing away
88 < o) ping_warning, a class{} option to notify opers before "Ping timeout"
89 < o) New hooking system, modularized: usermodes, iauth, message filtering etc.
90 < o) Network I/O speedups
91 < o) Various cleanups and bugfixes
92 < o) Support for client SSL
93 < o) Support for services (contrib/m_services.c)
94 < o) IP cloaking module (contrib/ip_cloaking.c)
95 < o) Native win32 build
96 < o) The password set in auth::password can now be encrypted
97 < o) Introduced new listen::flags directive.  Currently available flags are
98 <   'ssl' and 'hidden'.  Please read example.conf for further details
1 > -- Noteworthy changes in version 8.2.26 (2019-??-??)
2 > o) The 'general::tkline_expire_notices' configuration directive has been
3 >   replaced with user mode 'X'. *LINE expiration notices are sent to IRC
4 >   operators with that mode set
5 >
6 >
7 > -- Noteworthy changes in version 8.2.25 (2019-04-24)
8 > o) The 'class::number_per_ip', 'class::max_local' and 'class::max_global'
9 >   configuration directives have been replaced with just 'class::number_per_ip_local'
10 >   and 'class::number_per_ip_global'. The 'class::max_local' basically was
11 >   redundant as it had the same functionality as 'class::number_per_ip'
12 > o) Adding RESVs with wildcards no longer requires administrator privileges
13 > o) The 'general::ignore_bogus_ts' configuration option has been deprecated
14 > o) TLSv1.1 and TLSv1.0 are no longer supported and have been disabled in
15 >   the openssl and gnutls module
16 > o) Minimum supported OpenSSL version is 1.0.1f now
17 > o) Minimum supported GnuTLS version is 3.5.8 now
18 > o) The 'serverinfo::vhost' and 'serverinfo:vhost6' configuration directives have
19 >   been deprecated. If you need to bind() a specific address you can specify one
20 >   in the connect {} block
21 > o) The 'connect::vhost' configuration directive has been renamed to 'connect::bind'
22 > o) For a full list of all changes in this release, see https://git.io/fjRVk
23 >
24 >
25 > -- Noteworthy changes in version 8.2.24 (2018-04-05)
26 > o) Added "STATS s" to show configured pseudo {} blocks
27 > o) Implemented channel mode 'N' which prevents users from changing their
28 >   nick while in a channel with that mode set
29 > o) Services clients are now shown with 'is a Network Service' in "WHOIS"
30 > o) For a full list of all changes in this release, see https://git.io/fjRVt
31 >
32 >
33 > -- Noteworthy changes in version 8.2.23 (2018-03-26)
34 > o) irc-operators are now able to see a user's resolved hostname in /whowas,
35 >   and /whois even if the user has a fakehost/vhost
36 > o) RPL_WELCOME now does use the rfc2812 style nick!user@host format
37 > o) Removed rudimentary libgeoip support
38 > o) Added --enable-efence switch to allow easy linking with the
39 >   electric fence memory debugger library
40 > o) "JOIN 0" is no longer supported
41 > o) Fixed bug where ircd would not remove RPL_WHOISOPERATOR based svstags
42 >   when deoppering
43 > o) Fixed 'unknown closes' statistic in "STATS t" showing invalid values sometimes
44 > o) For a full list of all changes in this release, see https://git.io/fjRVq
45 >
46 >
47 > -- Noteworthy changes in version 8.2.22 (2017-03-26)
48 > o) Implemented channel mode 'L'. Channels with that mode set can make use of an
49 >   extended ban list size specified with the new 'channel::max_bans_large'
50 >   configuraton option. This mode can be set only by irc-operators or servers.
51 > o) Implemented channel mode 'u' which hides bmask (+b/+e/+I) lists and mode changes
52 >   to non-chanops everywhere
53 > o) Fixed an issue with "TRACE" where remote servers would reply with RPL_TRACEUSER
54 >   numerics containing UIDs
55 > o) "STATS z" now shows simple memory stats of servers linked to the network
56 > o) Added support for remote "ETRACE"
57 > o) For a full list of all changes in this release, see https://git.io/fjRVO
58 >
59 >
60 > -- Noteworthy changes in version 8.2.21 (2016-11-27)
61 > o) The 'general::default_floodtime' configuration option has been added
62 >   along with the "SET FLOODTIME" command. These allow to fine-tune the
63 >   message throttling better
64 > o) Fixed an issue with /invite not showing the list of channels the
65 >   sender is invited to
66 > o) For a full list of all changes in this release, see https://git.io/fjRVG
67 >
68 >
69 > -- Noteworthy changes in version 8.2.20 (2016-11-05)
70 > o) "INFO" now shows GnuTLS/OpenSSL library/header versions
71 > o) Added 'channel::max_invites' configuration option. See doc/reference.conf
72 >   for more information.
73 > o) INVITE expirations have been implemented. Expire time can be adjusted with
74 >   the 'channel::invite_expire_time' configuration directive
75 > o) /whois notices to operators have been re-added. User mode +y is required
76 >   to see them
77 > o) The maximum line length for motd files has been increased to 320 bytes
78 >   to support multibyte encodings better
79 > o) For a full list of all changes in this release, see https://git.io/fjRVZ
80 >
81 >
82 > -- Noteworthy changes in version 8.2.19 (2016-08-21)
83 > o) Fixed a possible server name leak in "WHO" with server hiding enabled
84 > o) "WHO" now allows opers to search by IP address
85 > o) Admins no longer can see IP addresses in "STATS P" with
86 >   'serverhide::hide_server_ips' enabled
87 > o) User mode 'n' now shows nick name changes from remote clients, too
88 > o) For a full list of all changes in this release, see https://git.io/fjRVC
89 >
90 >
91 > -- Noteworthy changes in version 8.2.18 (2016-06-22)
92 > o) Fixed an assert when a client sends invalid LIST options
93 > o) Fixed invalid memory stats of channel invites in "STATS z"
94 > o) For a full list of all changes in this release, see https://git.io/fjRSx
95 >
96 >
97 > -- Noteworthy changes in version 8.2.17 (2016-04-21)
98 > o) Fixed core on "REHASH CONF" with 'general::whowas_history_length'
99 >   set to 0
100 > o) Fixed possible core on "INVITE" with 'channel::max_channels' set to 0
101 > o) For a full list of all changes in this release, see https://git.io/fjRSp
102 >
103 >
104 > -- Noteworthy changes in version 8.2.16 (2016-03-20)
105 > o) Added 'general::whowas_history_length' configuration option which
106 >   allows to define the maximum length of the WHOWAS nickname history
107 > o) Services are now allowed to override 'general::min_nonwildcard',
108 >   and 'general::min_nonwildcard_simple' settings
109 > o) Minor updates to help files
110 > o) For a full list of all changes in this release, see https://git.io/fjRSj
111 >
112 >
113 > -- Noteworthy changes in version 8.2.15 (2016-02-24)
114 > o) Added proper support for Raspbian/ARM. Gracias to Beave/2600.net
115 >   for providing a box for testing purposes.
116 > o) Fixed an assert with empty user = "" directives in auth {} blocks
117 > o) "STATS z" now shows allocated listeners
118 > o) Fixed bug where 'can_flood' auth {} flags did not work on channels
119 > o) For a full list of all changes in this release, see https://git.io/fjR9v
120 >
121 >
122 > -- Noteworthy changes in version 8.2.14 (2016-02-09)
123 > o) Fixed server clustering
124 > o) Major cleanups to the configuration subsystem
125 > o) Improvements to libGeoIP support:
126 >   - Works now with IPv6 addresses
127 >   - Added 'libgeoip_database_options', 'libgeoip_ipv4_database_file',
128 >     and 'libgeoip_ipv6_database_file' configuration directives to the
129 >     serverinfo {} block
130 > o) Further improvements to GnuTLS support
131 > o) For a full list of all changes in this release, see https://git.io/fjR9f
132 >
133 >
134 > -- Noteworthy changes in version 8.2.13 (2016-02-02)
135 > o) Implemented support for GnuTLS. Currently ./configure's autodetection
136 >   intentionally prefers OpenSSL over GnuTLS, so OpenSSL detection needs
137 >   to be disabled explicitely by using the --disable-openssl switch.
138 > o) Minimum supported GnuTLS version is 3.3.8 now
139 > o) Minimum supported OpenSSL version is 1.0.1d now
140 > o) Added support for remote REHASH: REHASH <server> <option>
141 > o) Added 'rehash:remote' irc-operator privilege flag
142 > o) Added 'rehash' type to shared {} blocks
143 > o) Fixed minor memory leak with shared {} and cluster {} blocks
144 > o) For a full list of all changes in this release, see https://git.io/fjR9J
145 >
146 >
147 > -- Noteworthy changes in version 8.2.12 (2016-01-05)
148 > #######################################################################
149 > o) IMPORTANT: Character case mapping is 'ascii' now. It is recommended
150 >   to update all servers on the network to prevent possible channel
151 >   desynchronizations and nick name collision kills
152 > #######################################################################
153 > o) Added channel mode +T which forbids NOTICEs to be sent to a channel
154 > o) Fixed minor SVSTAG memory leak
155 > o) Fixed broken PART message blocking mechanism
156 > o) ircd now makes use of up to 8 name servers that are specified in
157 >   /etc/resolv.conf
158 > o) The -klinefile, -dlinefile, etc. switches didn't work at all
159 > o) Fixed possible core on ident lookups if ircd is out of file descriptors
160 > o) Far client exit notices (+F) now show IP addresses, too
161 > o) Made idle time look nicer in "STATS v|p" by using a formatted time string
162 > o) 'general::ts_warn_delta', and 'general::ts_max_delta' can be set to 0 now
163 > o) Several code cleanups and optimizations. Improved documentation
164 >
165 >
166 > -- Noteworthy changes in version 8.2.11 (2015-11-19)
167 > o) Implemented IRCv3.2 invite-notify extension
168 > o) Implemented IRCv3.2 chghost extension
169 > o) Added channel::invite_delay_channel configuration option
170 >
171 >
172 > -- Noteworthy changes in version 8.2.10 (2015-11-06)
173 > #######################################################################
174 > o) IMPORTANT: renamed 'serverhide::links_delay' configuration directive
175 >   to 'serverhide::flatten_links_delay'
176 > #######################################################################
177 > o) Added 'serverhide::flatten_links_file' configuration option
178 > o) Fixed bug where changing 'serverhide::flatten_links_delay' on runtime
179 >   would not have any effect
180 > o) mkpasswd (tools): fixed broken bcrypt support on *BSD in conjunction
181 >   with the -s and -l switches. Dropped MD5, DES and Extended DES support.
182 > o) Removed CHALLENGE in favor of ssl certificate fingerprint enabled
183 >   operator {} blocks
184 > o) RSA keys with less than 2048 bits are no longer supported; same applies
185 >   to the DH param file
186 > o) Added missing irc-operator privilege flags to /stats o. For a full list
187 >   of flags see doc/reference.conf
188 >
189 >
190 > -- Noteworthy changes in version 8.2.9 (2015-09-13)
191 > ########################################################################
192 > o) IMPORTANT: database files and links.txt are now stored in /var/lib
193 >   instead of /etc, so make sure to move your k/d/x-line database files
194 >   to the new path before (re)starting the ircd
195 > ########################################################################
196 > o) IMPORTANT: the splitmode logic has been removed along with the
197 >   following channel {} block configuration directives:
198 >   'default_split_user_count', 'default_split_server_count',
199 >   'no_create_on_split', 'no_join_on_split'
200 > ########################################################################
201 > o) Added 'xline_exempt' to auth {} block flags
202 > o) 'serverinfo::sid' is now optional. A unique SID is now automatically
203 >   generated based on the server's name and description
204 > o) Various fixes to the mkpasswd tool
205 > o) If supported by the compiler, ircd-hybrid now compiles with
206 >   '-fstack-protector-strong' instead of '-fstack-protector'
207 > o) Services can now add RESVs (SQLINEs) that have wildcards in it
208 > o) Channel name RESVs are now sanity checked for too broad masks
209 > o) 'class::connectfreq' now works properly with values lower than 300 seconds
210 > o) Implemented IRCv3.1 account-notify extension
211 > o) The 'general::oper_pass_resv' configuration directive has been deprecated
212 >   in favor of the new 'join:resv', and 'nick:resv' irc-operator flags.
213 >   See doc/reference.conf for more information.
214 > o) Added 'resv', and 'unresv' irc-operator flags. Previously, all
215 >   irc-operators were allowed to RESV and UNRESV, regardless of configured
216 >   privileges.
217 > o) Added 'close' to irc-operator flags
218 > o) ircd is using ISO 8601 date and time notation in most places now
219 >
220 >
221 > -- Noteworthy changes in version 8.2.8 (2015-05-10)
222 > o) ircd now rejects remote k-line requests for user@host mask that don't
223 >   have at least 'general::min_nonwildcard' non-wildcard characters in it
224 > o) Configuration related server notices are now sent to admins only as
225 >   they potentially could leak passwords and other sensitive data to irc
226 >   operators that don't have administrator privileges
227 > o) The GLINE/GUNGLINE commands have been removed. KLINE in conjunction
228 >   with cluster {} and/or shared {} blocks is now the recommended
229 >   way to add global user@host mask based server bans
230 > o) Added dline_min_cidr, dline_min_cidr6, kline_min_cidr, and kline_min_cidr6
231 >   configuration options to the general {} block
232 > o) Fixed bug where a REHASH would clear all X-Lines and RESVs that have
233 >   been set with the XLINE/RESV commands
234 > o) Fixed broken temporary remote XLINEs
235 > o) The 'general::havent_read_conf' configuration directive has been removed
236 > o) Various code cleanups
237 >
238 >
239 > -- Noteworthy changes in version 8.2.7 (2015-04-05)
240 > o) Fixed a potential buffer overflow with the BMASK inter-server command
241 > o) Fixed undefined behavior in the HELP command module which could
242 >   lead to stack corruption
243 > o) Removed useless help files for inter-server commands
244 >
245 >
246 > -- Noteworthy changes in version 8.2.6 (2015-03-29)
247 > o) INFO now shows configured values of 'max_watch' and 'stats_m_oper_only'
248 > o) WHOWAS now shows IP addresses to irc operators
249 > o) Fixed bug that would allow remote clients to bypass the hard
250 >   limit of max WHOWAS entries to be returned
251 > o) Code cleanups and performance improvements
252 >
253 >
254 > -- Noteworthy changes in version 8.2.5 (2015-02-24)
255 > o) Fixed core on Mac OSX 10.10 and possibly some other systems when parsing
256 >   the ircd.conf with configured pseudo {} blocks
257 >
258 >
259 > -- Noteworthy changes in version 8.2.4 (2015-02-17)
260 > o) Added SVSTAG command which services may use to add tags to users which can
261 >   be seen in /whois
262 > o) Added 'oper::whois' configuration option which allows to override the default
263 >   RPL_WHOISOPERATOR numeric string shown in /whois.
264 > o) IRC operators may now use +O on a channel even if they are only a half-op
265 > o) Fixed bug where TOPIC messages were not n!u@h prefixed in case of TBURST
266 >   issued by services clients
267 >
268 >
269 > -- Noteworthy changes in version 8.2.3 (2015-02-11)
270 > ########################################################################
271 > o) IMPORTANT: the following ircd.conf configuration directives have been renamed:
272 >
273 >   max_clients -> default_max_clients
274 >   join_flood_count -> default_join_flood_count
275 >   join_flood_time -> default_join_flood_time
276 > ########################################################################
277 > o) Fixed bug where "/rehash" would always reset the "MAX", "JFLOODTIME", and
278 >   "JFLOODCOUNT" values that have been changed from within IRC via the "/set"
279 >   command
280 > o) Added channel mode +C which prevents users from sending CTCPs to a channel
281 > o) Fixes to the NOTICE/PRIVMSG anti-flood logic
282 > o) Allow to disable the NOTICE/PRIVMSG anti-flood mechanism by setting the
283 >   'general::default_floodcount' configuration option to 0
284 > o) Updated some help files
285 > o) Minor code cleanups and improvements
286 > o) Operators may now see certificate fingerprints, user modes and hidden
287 >   channels via WHOIS as well. This used to be admin only.
288 >
289 >
290 > -- Noteworthy changes in version 8.2.2 (2015-01-20)
291 > o) Implemented IRCv3.1 extended-join extension
292 > o) Channel half-ops can now use INVITE as well
293 > o) Fixed broken 'make install -jX'
294 > o) m_opme.c has been added to modules/extra. Can be used on opless channels only.
295 > o) Added 'opme' to irc-operator flags
296 > o) Updated several help files
297 > o) The 'general::hide_spoof_ips' configuration option has been deprecated
298 > o) The 'general::true_no_oper_flood' configuration option has been deprecated.
299 >   Operators still can have higher 'flood' limits with no_oper_flood = yes;
300 >   hoewever, they are no longer allowed to bypass RecvQ limits.
301 > o) Added 'general::stats_m_oper_only' configuration option
302 > o) Remote client connection notices (user mode +F) now do show IP addresses, too
303 >
304 >
305 > -- Noteworthy changes in version 8.2.1 (2014-10-21)
306 > o) Fixed bug where "UNDLINE remote.server IP" did not work as expected
307 > o) Servers are now allowed to add/remove K-/D-/X-lines and RESVs
308 > o) Usermode +G now no longer allows to override +g
309 > o) Due to potential weakness, TLS session caching and session tickets
310 >   have been disabled
311 > o) Minor improvements to TS6 implementation
312 > o) WHOWAS now shows the name of the services account a user was logged in
313 >
314 >
315 > -- Noteworthy changes in version 8.2.0 (2014-08-24)
316 > o) Successful operator logins are now announced globally via GLOBOPS
317 > o) Cleanups and improvements to the resolver code
318 > o) Cleanups and improvements to the poll() I/O event notification support
319 > o) A topic mask can now be specified within the LIST options
320 > o) All users may now see channel modes in the /list reply
321 > o) Fixed bug where "NOTICE +#somechan" did allow bypassing resv {} channels,
322 >   or channels that are set +c (no control codes)
323 > o) pseudo {} blocks also known as service aliases have been implemented.
324 >   See doc/reference.conf for more information.
325 > o) Removed 'general::services_name' configuration option. This is now no
326 >   longer needed.
327 >
328 >
329 > -- Noteworthy changes in version 8.2.0rc2 (2014-08-03)
330 > o) Improved AWAY throttling to allow for better fine-tuning. See the
331 >   newly added 'away_count' and 'away_time' configuration directives
332 >   in the general {} block
333 > o) Support for the select() I/O event notification has been dropped
334 > o) Minor code cleanups and improvements
335 >
336 >
337 > -- Noteworthy changes in version 8.2.0rc1 (2014-07-20)
338 > o) Miscellaneous code cleanups and stabilization fixes
339 > o) ./configure now requires OpenSSL 0.9.8o or above in order
340 >   to enable TLS/SSL support
341 >
342 >
343 > -- Noteworthy changes in version 8.2.0beta4 (2014-07-06)
344 > #####################################################################
345 > o) IMPORTANT: channel halfops are now an integral part of ircd-hybrid
346 >   and can't be disabled anymore
347 > #####################################################################
348 > o) Many code cleanups and improvements
349 > o) Added flood control for the INVITE command. See channel {} block in reference.conf
350 > o) Changed flood control logic for the KNOCK command. See channel {} block in reference.conf
351 > o) INVITE without any parameters now shows a list of channels a client is invited to
352 > o) The OPERWALL command has been removed. Use GLOBOPS instead
353 > o) Added 'max_channels' to class {} blocks
354 > o) Added 'throttle_count' configuration option to the general {} block
355 > o) Added 'ssl_message_digest_algorithm' configuration option to serverinfo {} block.
356 >   See doc/reference.conf for more information.
357 > o) Added support for Elliptic Curve Diffie-Hellman (ECDH). Also an elliptic curve can be
358 >   specified via the 'serverinfo::ssl_dh_elliptic_curve' configuration option.
359 > o) Removed 'ssl_server_method' and 'ssl_client_method' configuration options.
360 >   ircd now only allows TLSv1, TLSv1.1 and TLSv1.2 protocols depending
361 >   on the OpenSSL version. SSLv3 is no longer supported.
362 >
363 >
364 > -- Noteworthy changes in version 8.2.0beta3 (2014-05-26)
365 > o) Code cleanups/performance improvements
366 >
367 >
368 > -- Noteworthy changes in version 8.2.0beta2 (2014-05-15)
369 > #########################################################################
370 > o) IMPORTANT: renamed 'general::warn_no_nline' configuration directive to
371 >   'general::warn_no_connect_block'
372 > #########################################################################
373 > o) Fixed bug with WHOIS not showing a list of channel names as expected
374 > o) Added usermode +q which hides idle and signon time in WHOIS
375 > o) Added usermode +p which hides channel list in WHOIS
376 >
377 >
378 > -- Noteworthy changes in version 8.2.0beta1 (2014-04-29)
379 > o) TS6 is now mandatory. ircd is no longer backwards compatible with TS5
380 >   and below.
381 > o) SVSJOIN and SVSPART commands have been added
382 > o) Major code cleanups and refactoring. Improved overall performance
383 > o) INFO now also reports MPATH (path to main motd (Message of the Day) file)
384 >   and SPATH (Path to server executable)
385 > o) Updated several help files
386 >
387 >
388 > -- Noteworthy changes in version 8.1.20 (2014-07-20)
389 > o) Fixed XLINE not working as expected
390 > o) Fixed build with LibreSSL which hasn't compression support
391 > o) Miscellaneous stabilization and cosmetical fixes
392 > o) EGD support has been dropped
393 >
394 >
395 > -- Noteworthy changes in version 8.1.19 (2014-07-05)
396 > o) Fixed EOB logic for remote servers
397 > o) Fixed bug where opers that have the +g/+G/+R umodes set won't receive server
398 >   notices for remote CONNECT/KLINE/DLINE/XLINE/RESV attempts
399 > o) Sending messages to user@server to local targets is now no longer possible,
400 >   as this was an easy way to bypass +R/+G/+g user modes.
401 > o) Fixed splicode logic so SPLITNUM now works as expected
402 > o) Fixed UNDLINE not to require the IP address to be prepended with *@
403 >
404 >
405 > -- Noteworthy changes in version 8.1.18 (2014-06-09)
406 > o) Fixed CAP issue for certain clients
407 > o) Fixed bug where "STATS p" would show an invalid amount of irc-operators
408 >   in case there are any +H opers
409 > o) irc-operators may now no longer set a channel +O if they are only halfops (%)
410 > o) Channel halfops (%) may now no longer (de)halfop other channel members
411 > o) Channel halfops (%) may now no longer KICK other channel halfops
412 > o) Fixed compile warnings; code cleanups
413 > o) Fixed bug where the configuration parser wouldn't truncate the network name
414 >   if 'general::network_name' contains spaces
415 >
416 >
417 > -- Noteworthy changes in version 8.1.17 (2014-05-01)
418 > o) Fixed possible WATCH core
419 > o) Fixed bug where the configuration parser wouldn't take time units
420 >   into consideration for the join_flood_time and throttle_time
421 >   configuration options
422 > o) Minor LIST optimization
423 >
424 >
425 > -- Noteworthy changes in version 8.1.16 (2014-04-20)
426 > o) Fixed undefined behaviour with crypt() returning NULL
427 >   since glibc2.17 in certain cases
428 > o) Admins may now see all channel members via "WHO #channel"
429 >   regardless of channel mode +s
430 > o) Fixed corrupted "STATS U" output
431 >
432 >
433 > -- Noteworthy changes in version 8.1.15 (2014-03-29)
434 > ########################################################################
435 > o) IMPORTANT: ircd binary is now again placed into bin/ instead of sbin/
436 > ########################################################################
437 > o) mkpasswd in tools/ now defaults to MD5 instead of DES
438 > o) The USERS command has been removed
439 > o) Fixed issue with SVSNICK where clients self-collided when changing
440 >   just the case of the nick name, i.e. somenick -> SomeNicK
441 > o) Minor code cleanups and cosmetical fixes
442 >
443 >
444 > -- Noteworthy changes in version 8.1.14 (2014-02-25)
445 > o) WHOWAS now honors 'serverhide::disable_remote_commands'
446 > o) Improved TS6 inter-server communication
447 > o) Minor code cleanups and speed enhancements
448 > o) Added 'unxline' oper flag
449 > o) Implemented IRCv3.2 userhost-in-names extension
450 > o) ircd now allows private RSA keys larger than 2048 bits
451 > o) Fixed bug where signals stopped from working after restarting
452 >   the ircd via SIGINT
453 > o) Fixed bug where certain irc clients could not reconnect via TLS/SSL
454 > o) Fixed long-standing bug where +p channels have been shown
455 >   in the WHOIS reply
456 >
457 >
458 > -- Noteworthy changes in version 8.1.13 (2014-01-07)
459 > o) Fixed EOB not working for remote servers (resulted in fake direction notices)
460 > o) Fixed remote client connection notices for servers that are
461 >   more than one hop away
462 > o) Fixed bug where the ircd didn't timeout SSL connections that
463 >   haven't finished the SSL handshake
464 > o) Fixed several bugs with server hiding
465 > o) Updated/fixed help files
466 > o) WHOIS no longer sends a notice to +y operators
467 >
468 >
469 > -- Noteworthy changes in version 8.1.12 (2013-12-22)
470 > o) RPL_WHOISMODES now uses the 379 numeric
471 > o) Serial number is now shown on start up
472 > o) Fixed possible channel mode desynch with services
473 > o) Fixed TS6 support with LOCOPS
474 > o) Minor code cleanups
475 > o) Fixed file descriptor leak with empty help files
476 > o) Fixed issue with WEBIRC where hostnames were not validated
477 >
478 >
479 > -- Noteworthy changes in version 8.1.11 (2013-12-06)
480 > o) Administrators may now see channel modes in LIST
481 > o) Fixed compile error on BSD systems when building with kqueue()
482 >
483 >
484 > -- Noteworthy changes in version 8.1.10 (2013-11-25)
485 > o) Fixed bug with kqueue() where it occasionally dropped updates
486 > o) Changed WHOIS to show certificate fingerprint to administrators only
487 > o) The WHO reply now shows if a nickname has been registered
488 >   with NickServ. ('r' status flag)
489 > o) Fixed some flaws with server hiding
490 > o) Fixed bug where "STATS P" would leak ip addresses to remotely connected
491 >   administrators, even if 'serverhide::hide_server_ips' was set to 'yes'
492 > o) Added SVSKILL command
493 >
494 >
495 > -- Noteworthy changes in version 8.1.9 (2013-11-08)
496 > o) Added usermode +W. Users connected via a webirc gateway get this
497 >   mode set by servers.
498 > o) WHOIS now shows if a client is connected via a webirc gateway
499 > o) Administrators may now see +s channels a user is in with WHOIS.
500 >   Secret channels are prepended with a tilde in the WHOIS reply.
501 > o) Administrators are now able to see all the user modes a user has
502 >   set via WHOIS
503 >
504 >
505 > -- Noteworthy changes in version 8.1.8 (2013-10-25)
506 > o) Fixed bug that could lead to a desynchronized nick database
507 >   throughout the entire network if using services enforced
508 >   nick names (SVSNICK)
509 > o) Cleaned up/modernized build system
510 > o) Add -fstack-protector to CFLAGS if available. Basically checks for
511 >   buffer overflows/stack-smashing attacks
512 > o) When using anope 1.9/2.0 services, WHOIS now shows the account name
513 >   of a registered/identified client (numeric 330)
514 > o) Administrators can now see +s channels in the LIST reply
515 >
516 >
517 > -- Noteworthy changes in version 8.1.7 (2013-08-18)
518 > o) Fixed issue with channel mode +n having no functionality at all
519 > o) Fixed SSL certificate fingerprint validation for outgoing server connects
520 > o) Updated several documentation files
521 >
522 >
523 > -- Noteworthy changes in version 8.1.6 (2013-08-02)
524 > o) Fixed possible core with empty motd files
525 >
526 >
527 > -- Noteworthy changes in version 8.1.5 (2013-07-16)
528 > o) Fixed bug that would prevent servers from linking together
529 >   if 'connect::aftype' isn't set
530 >
531 >
532 > -- Noteworthy changes in version 8.1.4 (2013-07-05)
533 > o) Added 'xline' and 'resv' logging types. See doc/reference.conf
534 >   for more information
535 > o) Fixed bug where remote STATS requests were not rate limited
536 > o) Fixed core with empty 'auth::spoof' entries
537 > o) Increased oper/auth/connect password length limit from 20 to 128
538 > o) Minor fixes to nickflood control code
539 >
540 >
541 > -- Noteworthy changes in version 8.1.3 (2013-06-23)
542 > o) Fixed possible core on "STATS z"
543 > o) Revised doc/reference.conf
544 > o) Fixed broken --disable-libgeoip switch
545 >
546 >
547 > -- Noteworthy changes in version 8.1.2 (2013-06-20)
548 > o) Added 'general::cycle_on_host_change' configuration option
549 > o) Added 'general::stats_u_oper_only' configuration option
550 > o) Added support for SHA-256 ssl certificate fingerprint based operator {}
551 >   and connect {} blocks.
552 >   In conjunction with Anope 1.9/2.0 IRC-services, clients are now also able
553 >   to automatically identify for their nick with ssl certificate
554 >   fingerprints
555 > o) Added 'operator::ssl_connection_required' configuration option. See
556 >   doc/reference.conf for more information
557 > o) Added usermode +S (client is connected via SSL/TLS). Allows services
558 >   to keep track of what users are connected via SSL, and allows to see
559 >   ssl-status of remote clients in a /whois
560 > o) Fixed a server name leak with server hiding enabled
561 >
562 >
563 > -- Noteworthy changes in version 8.1.1 (2013-06-06)
564 > ########################################################################
565 > o) IMPORTANT: moved disable_remote_command configuration directive from
566 >   general {} block to serverhide {} block
567 > ########################################################################
568 > o) Minor code cleanups/performance improvements
569 > o) Fixed bug where opers could see LOCOPS messages even if they don't have
570 >   the +l mode set
571 > o) Fixed bug where non-SSL clients could join +S channels on non-SSL servers
572 > o) Implemented motd {} configuration blocks. See doc/reference.conf for more
573 >   information
574 > o) "STATS T" shows configured MOTD files
575 >
576 >
577 > -- Noteworthy changes in version 8.1.0 (2013-05-23)
578 > o) Minor code cleanups/performance improvements
579 >
580 >
581 > -- Noteworthy changes in version 8.1.0rc1 (2013-05-19)
582 > o) Fixed broken spoofs
583 >
584 >
585 > -- Noteworthy changes in version 8.1.0beta5 (2013-05-15)
586 > o) Removed 'remote', and 'global_kill' oper flags, and added 'connect',
587 >   'squit', and 'kill' flags for better fine-tuning instead. Whether or
588 >   not a specific action is allowed on a remote server can be controlled
589 >   by appending the ':remote' flag. For example: 'kill' allows only local
590 >   clients to be killed, whereas 'kill:remote' allows to issue a KILL for
591 >   remote clients
592 > o) Added 'locops' and 'wallops' to irc-operator flags
593 > o) Improve/cleanup HELP system
594 >
595 >
596 > -- Noteworthy changes in version 8.1.0beta4 (2013-05-09)
597 > o) Implemented channel mode +M. Clients that haven't identified their
598 >   name with NickServ may not speak in a channel that has this mode set
599 > o) Fixed weird idletimes shown in /trace
600 > o) Added 'nononreg' (+R) to 'general::oper_umodes'
601 > o) Added user mode +F (can see remote client connect/exit notices)
602 >
603 >
604 > -- Noteworthy changes in version 8.1.0beta3 (2013-05-05)
605 > o) PCRE support has been dropped
606 > o) "STATS o" now shows how many times an operator {} block has been used.
607 >   Similar to "STATS x|q"
608 > o) Implemented channel mode +c. Known from other ircds, this mode basically
609 >   prevents users from sending messages including control codes to a channel
610 >   that has this mode set
611 > o) Fixed bug where bans were not checked against non-channel members when
612 >   sending messages to a channel
613 > o) Removed 'channel::quiet_on_ban' configuration option. This feature is
614 >   now enabled by default
615 >
616 >
617 > -- Noteworthy changes in version 8.1.0beta2 (2013-04-28)
618 > o) Fixed broken compile with libGeoIP disabled
619 > o) Code cleanups; working towards stabilization and improved performance
620 > o) Removed operflag 'nick_changes'. Operators can now set +n at will
621 > o) Fixed shared {} blocks not working as expected
622 > o) Fixed spoofs not working as expected
623 >
624 >
625 > -- Noteworthy changes in version 8.1.0beta1 (2013-04-25)
626 > #######################################################################
627 > o) IMPORTANT: name/channel entries can't be stacked any longer within a
628 >   single resv {} block. Each entry now requires its own resv {} block.
629 >   Read doc/reference.conf for more details
630 > #######################################################################
631 > o) Added 'resv::exempt' configuration option. Exempt can be either a
632 >   ISO 3166 alpha-2 two letter country code, or a nick!user@host mask.
633 >   CIDR is supported
634 > o) Removed 'channel::restrict_channels' configuration option
635 > o) Preliminary libGeoIP support. Currently only used for exempt entries
636 >   in resv {} blocks
637 > o) Improved WEBIRC authentication; added 'webirc' to 'auth::flags'.
638 >   A "webirc." spoof is now no longer required
639 > o) Implemented new memory pool allocator which basically is based upon Tor's
640 >   mempool allocator for Tor cells
641 > o) Major code cleanups
642 > o) Implemented new binary database storage for X-, D-, K-, G-Lines and RESVs.
643 >   Temporary bans are now stored as well and will persist after a reboot
644 > o) Channel based resv {} blocks may now contain wildcards
645 > o) NICK/JOIN now shows the actual reason of reserved nick-/channelnames
646 > o) contrib/ and its content has been enirely removed from the tree
647 > o) Added 'serverhide::hide_services' configuration option
648 > o) Added 'nononreg' (+R) to 'oper::umodes' and 'general::oper_only_modes'
649 > o) Implemented IRCv3.1 away-notify extension
650 >
651 >
652 > -- Noteworthy changes in version 8.0.9 (2013-05-16)
653 > o) Fixed bug where ircd would sometimes drop a services link because
654 >   of a missing argument to the "SVSMODE" command
655 > o) Fixed weird idletimes shown in /trace
656 >
657 >
658 > -- Noteworthy changes in version 8.0.8 (2013-04-28)
659 > o) "STATS s" now shows configured services {} blocks as well
660 > o) Fixed compile warnings, minor code cleanups and optimizations
661 > o) Increased nickname history length to 32768
662 > o) Unidentified/unregistered nicks may not speak in +R channels
663 >
664 >
665 > -- Noteworthy changes in version 8.0.7 (2013-04-12)
666 > o) Services may now set a channel topic without joining the channel first
667 > o) Fixed bug where WHOIS would send empty sockhost information on TS5 servers
668 > o) Remote server connection and split notices now go to new usermode +e.
669 >   These previously used usermode +x.
670 > o) Services may now change the host of a specific user
671 >   via "SVSMODE <timestamp> <target> +x <hostname>"
672 >
673 >
674 > -- Noteworthy changes in version 8.0.6 (2013-01-28)
675 > o) Fix bug where idle time sometimes is 0 even if the client didn't
676 >   send any private message
677 > o) Fixed possible core in try_parse_v4_netmask()
678 >
679 >
680 > -- Noteworthy changes in version 8.0.5 (2013-01-24)
681 > ########################################################################
682 > o) IMPORTANT: nick and topic lengths are now configurable via ircd.conf.
683 >   A max_nick_length, as well as a max_topic_length configuration option
684 >   can now be found in the serverinfo {} block
685 > ########################################################################
686 > o) Fixed build on GNU/Hurd
687 > o) Fixed log files not getting reopened after /rehash
688 > o) Improved logging of configuration file issues
689 > o) ircd.pid has been accidentally saved in /var instead of /var/run
690 > o) Linux RT signal support for notification of socket events has been dropped
691 > o) Fixed "STATS Y|y" sometimes sending weird sendq/recvq values
692 > o) INFO now also shows configured values of 'disable_fake_channels',
693 >   and 'stats_e_disabled'
694 > o) m_webirc.c is now officially supported, and has been moved from contrib/
695 >   to modules/
696 > o) /whois, /stats p, and /trace may now show fake idle times depending
697 >   on how the new 'class::min_idle' and class::max_idle configuration
698 >   directives have been configured. This feature basically works in the
699 >   same way as it does in csircd
700 > o) The configuration parser now does support 'year' and 'month' units
701 >
702 >
703 > -- Noteworthy changes in version 8.0.4 (2013-01-02)
704 > o) Fixed possible core on USERHOST/ISON with optimization enabled
705 > o) Fixed bug where 'can_flood' sometimes didn't work as expected
706 >
707 >
708 > -- Noteworthy changes in version 8.0.3 (2012-12-24)
709 > o) Fixed core on UNDLINE
710 > o) XLINE/KLINE/RESV/DLINE/SQUIT and KILL now have the same default reason
711 >   if a reason hasn't been specified
712 >
713 >
714 > -- Noteworthy changes in version 8.0.2 (2012-12-20)
715 > o) Minor updates to the build system
716 > o) Fixed broken --enable-assert configure switch
717 > o) Fixed bug where timed events stopped from working if the system's
718 >   clock is running backwards
719 > o) STATS q|Q now shows how many times a resv {} block has been matched
720 > o) Fixed contributed WEBIRC module
721 > o) IRC operators may now again see server generated nick rejection notices
722 >
723 >
724 > -- Noteworthy changes in version 8.0.1 (2012-11-04)
725 > o) Fixed broken CIDR support for CHALLENGE based irc operator logins
726 > o) Fixed class limits not properly applying to operator {} blocks
727 > o) Fixed possible TBURST desynchronization with services
728 > o) Fixed TBURST from leaking the server name if it's a hidden server
729 >
730 >
731 > -- Noteworthy changes in version 8.0.0 (2012-10-18)
732 > o) Fixed an off-by-one with spoofs. Spoofs are now also checked for
733 >   invalid characters
734 > o) Removed 'general::use_whois_actually' configuration directive.
735 >   This is now enabled by default
736 > o) Minor SQUIT handling fixes
737 > o) Fixed bancache not being updated on CHGHOST/CHGIDENT
738 >
739 >
740 > -- Noteworthy changes in version 8.0.0rc1 (2012-09-28)
741 > o) Removed 'general::client_flood' configuration option and added the
742 >   new 'recvq' configuration directive to class {} blocks.
743 >   The max size of a receive queue can be seen in "STATS Y"
744 >   for each class
745 > o) Allow the '[' and ']' characters in server description
746 >
747 >
748 > -- Noteworthy changes in version 8.0.0beta3 (2012-08-24)
749 > o) Fixed wrong syntax in several language files
750 > o) Removed &localchannels
751 > o) PRIVMSG to opers@some.server is no longer supported
752 > o) Fixed bug that could lead to topic desynchronization
753 > o) Removed 'serverhide::disable_hidden' configuration option
754 > o) Dropped ircd-hybrid-6 GLINE compatibility mode
755 > o) Removed use_invex, use_except and use_knock configuration options.
756 >   These features are now enabled by default
757 >
758 >
759 > -- Noteworthy changes in version 8.0.0beta2 (2012-07-21)
760 > o) 'channel::disable_fake_channels' now also disables ascii 29 (mIRC italic)
761 >   when set to yes
762 > o) Added 'channel::max_chans_per_oper' configuration directive. The old way
763 >   was to let operators join three times the amount of max_chans_per_user
764 > o) Replaced MODLOAD, MODUNLOAD, MODRELOAD, MODLIST and MODRESTART commands
765 >   with the new MODULE command which can be fed with the LOAD, UNLOAD, RELOAD
766 >   and LIST parameters.
767 >   MODRESTART has been entirely removed. Use "MODULE RELOAD *" to reload
768 >   all modules
769 > o) Added back server notice when a client tries to obtain a reserved nick name
770 > o) Removed OMOTD module
771 > o) Added 'set' to operator privilege flags. Gives access to the "SET" command
772 > o) Improved TS6 support
773 > o) Channel keys/passwords are now case sensitive
774 >
775 >
776 > -- Noteworthy changes in version 8.0.0beta1 (2012-05-28)
777 > o) Implemented full services support, including but not limited to the
778 >   following changes:
779 >   - Added SVSNICK, and SVSMODE command handlers
780 >   - Added service stamps to NICK/UID messages
781 >   - Added SVS to server capabilities (CAPAB). SVS capable servers can
782 >     deal with extended NICK/UID messages that contain service IDs/stamps.
783 >   - Changed rejected client notices to go to new usermode +j.  These
784 >     previously used usermode +r.
785 >   - Added usermode +r (registered nick) and channelmode +r (registered channel)
786 >   - Added usermode +R (only registered clients may send a private message)
787 >   - Added channelmode +R (only registered clients may join that channel)
788 >   - Various services shortcuts have been added (/NS, /CS, /NICKSERV, /CHANSERV, etc.)
789 >   - Added services {} block to ircd.conf
790 >   - Added services_name directive to general {} block
791 >   - Added GLOBOPS mainly for services compatibility, but can be used by operators, too
792 > o) Removed RKLINE and RXLINE commands. Regular expression based bans should
793 >   only be added via ircd.conf
794 > o) Added 'globops', 'restart', 'dline', 'undline' and 'module' operator
795 >   privilege flags. Read doc/reference.conf for further explanation of what
796 >   these flags control
797 > o) Removed Idle-time klines
798 > o) Cleaned up modules API. Old modules won't work anymore
799 > o) Removed 'general::burst_away' configuration directive. AWAY bursts are now
800 >   controlled via 'connect::flags' explicitly
801 > o) Introduced new logging subsystem including log rotation based on
802 >   file sizes. Log timestamp format is ISO8601 now
803 > o) Added support for remote D-lines
804 > o) Added usermode +H which is basically a replacement for the hidden_admin and
805 >   hidden_oper operator flags. With usermode +H, irc operator status can now
806 >   be hidden even on remote servers
807 > o) Added CIDR support for operator {} blocks
808 > o) Removed the servlink program. ircd-hybrid can now make use of
809 >   SSL/TLS for inter-server communication.
810 >   NOTE: compressed server links are of course still available, but a SSL/TLS
811 >   connection is required, as compression is now handled via OpenSSL
812 > o) Removed 'ssl_server_protocol' configuration directive and
813 >   added 'ssl_client_method' and 'ssl_server_method' instead.
814 >   Both of these options can now be changed at runtime
815 > o) Oper login IDs are no longer limited to NICKLEN*2
816 > o) Removed 'channel::burst_topicwho' configuration option. This feature is now
817 >   enabled by default
818 > o) "STATS Y|y" now reports CIDR limits as well
819 > o) Added m_webirc.c to contrib/
820 > o) Overall code cleanup and speed improvements
821  
822   --------------------------------------------------------------------------------
823  
102 BUGS: Major bugs in this release are listed in BUGS
103
824   BUG REPORTS: If you run this code and encounter problems, you must report
825 < the bug in one of the following ways:
826 <  a) By EMAIL to bugs@ircd-hybrid.org
827 <  b) On http://forum.ircd-hybrid.org/
108 < Please include a gdb backtrace and a copy of your setup.h and
109 < ircd.conf with any report  (with passwords and other sensitive
825 > the bug by EMAIL to bugs@ircd-hybrid.org
826 > Please include a gdb backtrace and a copy of your config.h and
827 > ircd.conf with any report (with passwords and other sensitive
828   information masked).
829  
830   DISCUSSION: There is a mailing list for discussion of hybrid issues,
831 < including betas.  To subscribe, use this link:
831 > including betas. To subscribe, use this link:
832      https://lists.ircd-hybrid.org/mailman/listinfo/hybrid
833 < This is the proper place to discuss new features, bugs, etc.  Posting here
116 < is much more likely to get something done than ranting on #TZ.
117 < You can also use Hybrid forums at http://forum.ircd-hybrid.org/
833 > This is the proper place to discuss new features, bugs, etc.
834  
835   Questions/comments directed to bugs@ircd-hybrid.org
836  
837 < Please read doc/whats-new.txt for information about what is in this release
122 <
123 < Other files recommended for reading: BUGS, README.FIRST, INSTALL
837 > Other files recommended for reading: README, INSTALL
838  
839   --------------------------------------------------------------------------------
840   $Id$

Comparing:
ircd-hybrid-7.2/RELNOTES (property svn:keywords), Revision 855 by db, Mon Feb 26 22:06:45 2007 UTC vs.
ircd-hybrid/branches/8.2.x/NEWS (property svn:keywords), Revision 9024 by michael, Tue May 28 11:16:27 2019 UTC

# Line 1 | Line 1
1 < Id Revision
1 > Id

Diff Legend

Removed lines
+ Added lines
< Changed lines (old)
> Changed lines (new)