[ViewVC] Diff of: svn/ircd-hybrid/branches/8.2.x/NEWS

Comparing:
ircd-hybrid-8/NEWS (file contents), Revision 1432 by michael, Sat Jun 9 19:40:08 2012 UTC vs.
ircd-hybrid/branches/8.2.x/NEWS (file contents), Revision 4654 by michael, Mon Sep 22 15:48:15 2014 UTC

-<
+-- ircd-hybrid-8beta2 Release Notes
->
+-- Noteworthy changes in version 8.2.1 (2014-??-??)
->
+o) Fixed bug where "/undline remote.server IP" did not work as expected
->
->
->
+-- Noteworthy changes in version 8.2.0 (2014-08-24)
->
+o) Successful operator logins are now announced globally via GLOBOPS
->
+o) Cleanups and improvements to the resolver code
->
+o) Cleanups and improvements to the poll() I/O event notification support
->
+o) A topic mask can now be specified within the /list options
->
+o) All users may now see channel modes in the /list reply
->
+o) Fixed bug where "NOTICE +#somechan" did allow bypassing resv{} channels,
->
+   or channels that are set +c (no control codes)
->
+o) pseudo {} blocks also known as service aliases have been implemented.
->
+   See doc/reference.conf for more information.
->
+o) Removed general::services_name configuration option. This is now no longer needed.
->
->
->
+-- Noteworthy changes in version 8.2.0rc2 (2014-08-03)
->
+o) Improved AWAY throttling to allow for better fine-tuning. See the
->
+   newly added 'away_count' and 'away_time' configuration directives
->
+   in the general {} block
->
+o) Support for the select() I/O event notification has been dropped
->
+o) Minor code cleanups and improvements
->
->
->
+-- Noteworthy changes in version 8.2.0rc1 (2014-07-20)
->
+o) Miscellaneous code cleanups and stabilization fixes
->
+o) ./configure now requires OpenSSL 0.9.8o or above in order
->
+   to enable TLS/SSL support
->
->
->
+-- Noteworthy changes in version 8.2.0beta4 (2014-07-06)
->
+o) Channel halfops are now an integral part of ircd-hybrid
->
+   and can't be disabled anymore
->
+o) Many code cleanups and improvements
->
+o) Added flood control for the INVITE command. See channel {} block in reference.conf
->
+o) Changed flood control logic for the KNOCK command. See channel {} block in reference.conf
->
+o) INVITE without any parameters now shows a list of channels a client is invited to
->
+o) The OPERWALL command has been removed. Use GLOBOPS instead
->
+o) Added 'max_channels' to class {} blocks
->
+o) Added 'throttle_count' configuration option to the general {} block
->
+o) Added 'ssl_message_digest_algorithm' configuration option to serverinfo {} block.
->
+   See doc/reference.conf for more information.
->
+o) Added support for Elliptic Curve Diffie-Hellman (ECDH). Also an elliptic curve can be
->
+   specified via the serverinfo::ssl_dh_elliptic_curve configuration option.
->
+o) Removed 'ssl_server_method' and 'ssl_client_method' configuration options.
->
+   ircd now only allows TLSv1, TLSv1.1 and TLSv1.2 protocols depending
->
+   on the OpenSSL version. SSLv3 is no longer supported.
->
->
->
+-- Noteworthy changes in version 8.2.0beta3 (2014-05-26)
->
+o) Code cleanups/performance improvements
->
->
->
+-- Noteworthy changes in version 8.2.0beta2 (2014-05-15)
->
+########################################################################
->
+o) IMPORTANT: renamed general::warn_no_nline configuration directive to
->
+   general::warn_no_connect_block
->
+########################################################################
->
+o) Fixed bug with /whois not showing a list of channel names as expected
->
+o) Added usermode +q which hides idle and signon time in WHOIS
->
+o) Added usermode +p which hides channel list in WHOIS
->
->
->
+-- Noteworthy changes in version 8.2.0beta1 (2014-04-29)
->
+o) TS6 is now mandatory. ircd is no longer backwards compatible with TS5
->
+   and below.
->
+o) SVSJOIN and SVSPART has been added
->
+o) Major code cleanups and refactoring. Improved overall performance
->
+o) /INFO now also reports MPATH (path to main motd (Message of the Day) file)
->
+   and SPATH (Path to server executable)
->
+o) Updated several help files
->
->
->
+-- Noteworthy changes in version 8.1.20 (2014-07-20)
->
+o) Fixed XLINE not working as expected
->
+o) Fixed build with LibreSSL which hasn't compression support
->
+o) Miscellaneous stabilization and cosmetical fixes
->
+o) EGD support has been dropped
->
->
->
+-- Noteworthy changes in version 8.1.19 (2014-07-05)
->
+o) Fixed EOB logic for remote servers
->
+o) Fixed bug where opers that have the +g/+G/+R umodes set won't receive server
->
+   notices for remote CONNECT/KLINE/DLINE/XLINE/RESV attempts
->
+o) Sending messages to user@server to local targets is now no longer possible,
->
+   as this was an easy way to bypass +R/+G/+g user modes.
->
+o) Fixed splicode logic so SPLITNUM now works as expected
->
+o) Fixed UNDLINE not to require the IP address to be prepended with *@
->
->
->
+-- Noteworthy changes in version 8.1.18 (2014-06-09)
->
+o) Fixed CAP issue for certain clients
->
+o) Fixed bug where "STATS p" would show an invalid amount of irc-operators
->
+   in case there are any +H opers
->
+o) irc-operators may now no longer set a channel +O if they are only halfops (%)
->
+o) Channel halfops (%) may now no longer (de)halfop other channel members
->
+o) Channel halfops (%) may now no longer KICK other channel halfops
->
+o) Make sure general::stats_e_disabled gets reset via /rehash
->
+o) Fixed compile warnings; code cleanups
->
+o) Fixed bug where the configuration parser wouldn't truncate the network name
->
+   if general::network_name contains spaces
->
->
->
+-- Noteworthy changes in version 8.1.17 (2014-05-01)
->
+o) Fixed possible WATCH core
->
+o) Fixed bug where the configuration parser wouldn't take time units
->
+   into consideration for the join_flood_time and throttle_time
->
+   configuration options
->
+o) Minor /list optimization
->
->
->
+-- Noteworthy changes in version 8.1.16 (2014-04-20)
->
+o) Fixed undefined behaviour with crypt() returning NULL
->
+   since glibc2.17 in certain cases
->
+o) Admins may now see all channel members via "WHO #channel"
->
+   regardless of channel mode +s
->
+o) Fixed corrupted "STATS U" output
->
->
->
+-- Noteworthy changes in version 8.1.15 (2014-03-29)
->
+########################################################################
->
+o) IMPORTANT: ircd binary is now again placed into bin/ instead of sbin/
->
+########################################################################
->
+o) mkpasswd in tools/ now defaults to MD5 instead of DES
->
+o) USERS command has been removed
->
+o) Fixed issue with SVSNICK where clients self-collided when changing
->
+   just the case of the nick name, i.e. somenick -> SomeNicK
->
+o) Minor code cleanups and cosmetical fixes
->
->
->
+-- Noteworthy changes in version 8.1.14 (2014-02-25)
->
+o) WHOWAS now honors serverhide::disable_remote_commands
->
+o) Improved TS6 inter-server communication
->
+o) Minor code cleanups and speed enhancements
->
+o) Added 'unxline' oper flag
->
+o) Added support for "userhost-in-names" client capability
->
+o) ircd now allows private rsa keys larger than 2048 bits
->
+o) Fixed bug where signals stopped from working after restarting
->
+   the ircd via SIGINT
->
+o) Fixed bug where certain irc clients could not reconnect via TLS/SSL
->
+o) Fixed long-standing bug where +p channels have been shown
->
+   in the /whois reply
->
->
->
+-- Noteworthy changes in version 8.1.13 (2014-01-07)
->
+o) Fixed EOB not working for remote servers (resulted in fake
->
+   direction notices)
->
+o) Fixed remote client connection notices for servers that are
->
+   more than one hop away
->
+o) Fixed bug where ircd didn't timeout SSL connections that
->
+   haven't finished the SSL handshake
->
+o) Fixed several bugs with server hiding
->
+o) Updated/fixed help files
->
+o) WHOIS no longer sends a notice to +y operators
->
->
->
+-- Noteworthy changes in version 8.1.12 (2013-12-22)
->
+o) RPL_WHOISMODES now uses the 379 numeric
->
+o) Serial number is now shown on start up
->
+o) Fixed possible channel mode desynch with services
->
+o) Fixed TS6 support with LOCOPS
->
+o) Minor code cleanups
->
+o) Fixed file descriptor leak with empty help files
->
+o) Fixed issue with WEBIRC where hostnames were
->
+   not validated
->
->
->
+-- Noteworthy changes in version 8.1.11 (2013-12-06)
->
+o) Administrators may now see channel modes in /LIST
->
+o) Fixed compile error on BSD systems when building with kqueue()
->
->
->
+-- Noteworthy changes in version 8.1.10 (2013-11-25)
->
+o) Fixed bug with kqueue() where it occasionally dropped updates
->
+o) Changed WHOIS to show a client's certificate fingerprint
->
+   to administrators only
->
+o) The WHO reply now shows whether or not a nickname has
->
+   been registered with NickServ. ('r' status flag)
->
+o) Fixed some flaws with server hiding
->
+o) Fixed bug where "STATS P" would leak ip addresses to remotely connected
->
+   administrators, even if serverhide::hide_server_ips was set to 'yes'
->
+o) Services coders: added SVSKILL
->
->
->
+-- Noteworthy changes in version 8.1.9 (2013-11-08)
->
+o) Added usermode +W. Users connected via a webirc gateway get this
->
+   mode set by servers.
->
+o) /WHOIS now shows if a client is connected via a webirc
->
+   gateway
->
+o) Administrators may now see +s channels a user is in with /WHOIS.
->
+   Secret channels are prepended with a tilde in the /WHOIS
->
+   reply.
->
+o) Administrators are now able to see all the user modes a user has
->
+   set via /whois
->
->
->
+-- Noteworthy changes in version 8.1.8 (2013-10-25)
->
+o) Fixed bug that would lead to a desynchronized nick database
->
+   throughout the entire network if using services enforced
->
+   nick names (SVSNICK)
->
+o) Cleaned up/modernized build system
->
+o) Add -fstack-protector to CFLAGS if available. Basically checks for
->
+   buffer overflows/stack-smashing attacks
->
+o) When using anope 1.9/2.0 services, /WHOIS now shows the account name
->
+   of a registered/identified client (numeric 330)
->
+o) Administrators can now see +s channels in /LIST
->
->
->
+-- Noteworthy changes in version 8.1.7 (2013-08-18)
->
+o) Fixed issue with channel mode +n having no functionality at all
->
+o) Fixed SSL certificate fingerprint validation for outgoing server connects
->
+o) Updated several documentation files
->
->
->
+-- Noteworthy changes in version 8.1.6 (2013-08-02)
->
+o) Fixed possible core with empty motd files
->
->
->
+-- Noteworthy changes in version 8.1.5 (2013-07-16)
->
+o) Fixed bug that would prevent servers from linking together
->
+   if connect::aftype isn't set
->
->
->
+-- Noteworthy changes in version 8.1.4 (2013-07-05)
->
+o) Added 'xline' and 'resv' logging types. See doc/reference.conf
->
+   for more information
->
+o) Fixed bug where remote /STATS requests were not rate limited
->
+o) Fixed core with empty auth::spoof entries
->
+o) Increased oper/auth/connect password length limit from 20 to 128
->
+o) Minor fixes to nickflood control code
->
->
->
+-- Noteworthy changes in version 8.1.3 (2013-06-23)
->
+o) Fixed possible core on "STATS z"
->
+o) Revised doc/reference.conf
->
+o) Fixed broken --disable-libgeoip switch
->
->
->
+-- Noteworthy changes in version 8.1.2 (2013-06-20)
->
+o) Added general::cycle_on_host_change configuration option
->
+o) Added general::stats_u_oper_only configuration option
->
+o) Added support for SHA-256 ssl certificate fingerprint based operator{}
->
+   and connect{} blocks.
->
+   In conjunction with Anope 1.9/2.0 IRC-services, clients are now also able
->
+   to automatically identify for their nick with ssl certificate
->
+   fingerprints
->
+o) Added operator::ssl_connection_required configuration option. See
->
+   doc/reference.conf for more information
->
+o) Added usermode +S (client is connected via SSL/TLS). Allows services
->
+   to keep track of what users are connected via SSL, and allows to see
->
+   ssl-status of remote clients in a /whois
->
+o) Fixed a server name leak with server hiding enabled. Reported by
->
+   Adam <adam@anope.org>
->
->
->
+-- Noteworthy changes in version 8.1.1 (2013-06-06)
->
+########################################################################
->
+o) IMPORTANT: moved disable_remote_command configuration directive from
->
+   general{} block to serverhide{} block
->
+########################################################################
->
+o) Minor code cleanups/performance improvements
->
+o) Fixed bug where opers could see LOCOPS messages even if they don't have
->
+   the +l mode set
->
+o) Fixed bug where non-SSL clients could join +S channels on non-SSL servers
->
+o) Implemented motd{} configuration blocks. See doc/reference.conf for more
->
+   information
->
+o) "STATS T" shows configured MOTD files
->
->
->
+-- Noteworthy changes in version 8.1.0 (2013-05-23)
->
+o) Minor code cleanups/performance improvements
->
->
->
+-- Noteworthy changes in version 8.1.0rc1 (2013-05-19)
->
+o) Fixed broken spoofs
->
->
->
+-- Noteworthy changes in version 8.1.0beta5 (2013-05-15)
->
+o) Removed 'remote', and 'global_kill' oper flags, and added 'connect',
->
+   'squit', and 'kill' flags for better fine-tuning instead. Whether or
->
+   not a specific action is allowed on a remote server can be controlled
->
+   by appending the ':remote' flag. For example: 'kill' allows only local
->
+   clients to be killed, whereas 'kill:remote' allows to issue a KILL for
->
+   remote clients
->
+o) Added 'locops' and 'wallops' to irc-operator flags
->
+o) Improve/cleanup HELP system
->
->
->
+-- Noteworthy changes in version 8.1.0beta4 (2013-05-09)
->
+o) Implemented channel mode +M. Clients that haven't identified their
->
+   name with NickServ may not speak in a channel that has this mode set
->
+o) Fixed weird idletimes shown in /trace
->
+o) Added 'nononreg' (+R) to general::oper_umodes
->
+o) Added user mode +F (can see remote client connect/exit notices)
->
->
->
+-- Noteworthy changes in version 8.1.0beta3 (2013-05-05)
->
+o) PCRE support has been dropped
->
+o) "STATS o" now shows how many times an oper{} block has been used.
->
+   Similar to STATS x|q"
->
+o) Implemented channel mode +c. Known from other ircds, this mode basically
->
+   prevents users from sending messages including control codes to a channel
->
+   that has this mode set
->
+o) Fixed bug where bans were not checked against non-channel members when
->
+   sending messages to a channel
->
+o) Removed channel::quiet_on_ban configuration option. This feature is
->
+   now enabled by default
->
->
->
+-- Noteworthy changes in version 8.1.0beta2 (2013-04-28)
->
+o) Fixed broken compile with libGeoIP disabled
->
+o) Code cleanups; working towards stabilization and improved performance
->
+o) Removed operflag 'nick_changes'. Operators can now set +n at will
->
+o) Fixed shared{} blocks not working as expected
->
+o) Fixed spoofs not working as expected
->
->
->
+-- Noteworthy changes in version 8.1.0beta1 (2013-04-25)
->
+########################################################################
->
+o) IMPORTANT: name/channel entries can't be stacked any longer within
->
+   a single resv{} block. Each entry now requires its own resv{} block.
->
+   Read doc/reference.conf for more details
->
+#######################################################################
->
+o) Added resv::exempt configuration option. Exempt can be either a
->
+   ISO 3166 alpha-2 two letter country code, or a nick!user@host mask.
->
+   CIDR is supported
->
+o) Removed channel::restrict_channels configuration option
->
+o) Preliminary libGeoIP support. Currently only used for exempt entries
->
+   in resv{} blocks
->
+o) Improved WEBIRC authentication; added 'webirc' to auth::flags.
->
+   A "webirc." spoof is now no longer required
->
+o) Implemented new memory pool allocator which basically is based upon Tor's
->
+   mempool allocator for Tor cells
->
+o) Major code cleanups
->
+o) Implemented new binary database storage for X-,D-,K-,G-Lines and RESVs.
->
+   Temporary bans are now stored as well and will persist after a reboot
->
+o) Channel based resv{} blocks may now contain wildcards
->
+o) NICK/JOIN now shows the actual reason of reserved nick-/channelnames
->
+o) contrib/ and its content has been removed from the tree
->
+o) Added serverhide::hide_services configuration option
->
+o) Added 'nononreg' (+R) to oper::umodes and general::oper_only_modes
->
+o) Added support for "away-notify" client capability
->
->
->
+-- Noteworthy changes in version 8.0.9 (2013-05-16)
->
+o) Fixed bug where ircd would sometimes drop a services link because
->
+   of a missing argument to the SVSMODE command
->
+o) Fixed weird idletimes shown in /trace
->
->
->
+-- Noteworthy changes in version 8.0.8 (2013-04-28)
->
+o) "STATS s" now shows configured services{} blocks as well
->
+o) Fixed compile warnings, minor code cleanups and optimizations
->
+o) Increased nickname history length to 32768
->
+o) Unidentified/unregistered nicks may not speak in +R channels
->
->
->
+-- Noteworthy changes in version 8.0.7 (2013-04-12)
->
+o) Services may now set a channel topic without joining the channel first
->
+o) Fixed bug where /whois would send empty sockhost information on TS5
->
+   servers
->
+o) Remote server connection and split notices now go to new usermode +e.
->
+   These previously used usermode +x.
->
+o) Services may now change the host of a specific user
->
+   via "SVSMODE <timestamp> <target> +x <hostname>"
->
->
->
+-- Noteworthy changes in version 8.0.6 (2013-01-28)
->
+o) Fix bug where idle time sometimes is 0 even if the client didn't
->
+   send any private message
->
+o) Fixed possible core in try_parse_v4_netmask()
->
->
->
+-- Noteworthy changes in version 8.0.5 (2013-01-24)
->
+########################################################################
->
+o) IMPORTANT: nick and topic lengths are now configurable via ircd.conf.
->
+   A max_nick_length, as well as a max_topic_length configuration option
->
+   can now be found in the serverinfo{} block
->
+########################################################################
->
+o) Fixed build on GNU/Hurd as reported by Dominic Hargreaves
->
+o) Fixed log files not getting reopened after /rehash
->
+o) Improved logging of configuration file issues
->
+o) ircd.pid has been accidentally saved in /var instead of /var/run
->
+o) Linux RT signal support for notification of socket events has been dropped
->
+o) Fixed "STATS Y|y" sometimes sending weird sendq/recvq values
->
+o) INFO now also shows configured values of 'disable_fake_channels',
->
+   and 'stats_e_disabled'
->
+o) m_webirc.c is now officially supported, and has been moved from contrib/
->
+   to modules/
->
+o) /whois, /stats p, and /trace may now show fake idle times depending on
->
+   how the new class::min_idle and class::max_idle configuration directives
->
+   have been configured. This feature basically works in the same
->
+   way as it does in csircd
->
+o) The configuration parser now does support 'year' and 'month' units
->
->
->
+-- Noteworthy changes in version 8.0.4 (2013-01-02)
->
+o) Fixed possible core on USERHOST/ISON with optimization enabled
->
+o) Fixed bug where can_flood sometimes didn't work as expected
->
->
->
+-- Noteworthy changes in version 8.0.3 (2012-12-24)
->
+o) Fixed core on UNDLINE
->
+o) XLINE/KLINE/RESV/DLINE/SQUIT and KILL now have the same default reason
->
+   if a reason hasn't been specified
->
->
->
+-- Noteworthy changes in version 8.0.2 (2012-12-20)
->
+o) Minor updates to the build system
->
+o) Fixed broken --enable-assert configure switch
->
+o) Fixed bug where timed events stopped from working if the system's
->
+   clock is running backwards
->
+o) STATS q|Q now shows how many times a resv{} block has been matched
->
+o) Fixed contributed WEBIRC module
->
+o) IRC operators may now again see server generated nick rejection notices
->
->
->
+-- Noteworthy changes in version 8.0.1 (2012-11-04)
->
+o) Fixed broken CIDR support for CHALLENGE based irc operator logins
->
+o) Fixed class limits not properly applying to oper{} blocks
->
+o) Fixed possible TBURST desynchronization with services
->
+o) Fixed TBURST sending server's name to clients if it's a hidden server
->
->
->
+-- Noteworthy changes in version 8.0.0 (2012-10-18)
->
+o) Fixed an off-by-one with spoofs. Spoofs are now also checked for
->
+   invalid characters
->
+o) Removed general::use_whois_actually configuration directive. This is
->
+   now enabled by default
->
+o) Minor SQUIT handling fixes
->
+o) Fixed bancache not being updated on CHGHOST/CHGIDENT
->
->
->
+-- Noteworthy changes in version 8.0.0rc1 (2012-09-28)
->
+o) Removed general::client_flood configuration option and added the
->
+   new 'recvq' configuration directive to class{} blocks.
->
+   The max size of a receive queue can be seen in "STATS Y"
->
+   for each class
->
+o) Allow the '[' and ']' characters in server description
->
->
->
+-- Noteworthy changes in version 8.0.0beta3 (2012-08-24)
->
+o) Fixed wrong syntax in several language files
->
+o) Removed &localchannels
->
+o) PRIVMSG to opers@some.server is no longer supported
->
+o) Fixed bug that could lead to topic desynchronization
->
+o) Removed serverhide::disable_hidden configuration option
->
+o) Dropped ircd-hybrid-6 GLINE compatibility mode
->
+o) Removed use_invex, use_except and use_knock configuration options.
->
+   These features are now enabled by default
->
->
->
+-- Noteworthy changes in version 8.0.0beta2 (2012-07-21)
+o) channel::disable_fake_channels now also disables ascii 29 (mIRC italic)
+   when set to yes
-–
+o) Unregistered clients may not talk in a +R channel
+o) Added channel::max_chans_per_oper configuration directive. The old way
-<
+   was to let ircops join three times the amount of max_chans_per_user
->
+   was to let operators join three times the amount of max_chans_per_user
->
+o) Replaced MODLOAD, MODUNLOAD, MODRELOAD, MODLIST and MODRESTART commands
->
+   with the new MODULE command which can be fed with the LOAD, UNLOAD, RELOAD
->
+   and LIST parameters.
->
+   MODRESTART has been entirely removed. Use "MODULE RELOAD *" to reload
->
+   all modules
->
+o) Added back server notice when a client tries to obtain a reserved nick name
->
+o) Removed OMOTD module
->
+o) Added 'set' to operator privilege flags. Gives access to the "SET" command
->
+o) Improved TS6 support
->
+o) Channel keys/passwords are now case sensitive
->
-<
+-- ircd-hybrid-8beta1 Release Notes
-<
+o) Implemented full services support. Among other things, the following changes
-<
+   have been done for this:
->
+-- Noteworthy changes in version 8.0.0beta1 (2012-05-28)
->
+o) Implemented full services support, including but not limited to the
->
+   following changes:
+   - Added SVSNICK, and SVSMODE command handlers
+   - Added service stamps to NICK/UID messages
+   - Added SVS to server capabilities (CAPAB). SVS capable servers can
+     deal with extended NICK/UID messages that contain service IDs/stamps.
-<
+   - Usermode +r (registered nick) has been added, as well as
-<
+     channelmode +r (registered channel)
-<
+   - Now that usermode +r has a different function than before, rejected
-<
+     client notices now go to new usermode +j
-<
+   - Various services shortcuts have been added (/NS, /CS, /NICKSERV, /CHANSERV, etc.)
-<
+   - Added channelmode +R (only registered clients may join that channel)
->
+   - Changed rejected client notices to go to new usermode +j.  These
->
+     previously used usermode +r.
->
+   - Added usermode +r (registered nick) and channelmode +r (registered channel)
+   - Added usermode +R (only registered clients may send a private message)
-+
+   - Added channelmode +R (only registered clients may join that channel)
-+
+   - Various services shortcuts have been added (/NS, /CS, /NICKSERV, /CHANSERV, etc.)
+   - Added services{} block to ircd.conf
+   - Added services_name directive to general{} block
+   - Added GLOBOPS mainly for services compatibility, but can be used by operators, too
-<
+o) RKLINE and RXLINE commands have been removed. Regular expression based
-<
+   bans should only be added via ircd.conf
-<
+o) Added 'globops', 'restart', 'dline', 'undline' and 'module' operator privilege flags.
-<
+   Read doc/example.conf for further explanation of what these flags
-<
+   are supposed to be doing
-<
+o) Idle-time klines have been removed
->
+o) Removed RKLINE and RXLINE commands. Regular expression based bans should
->
+   only be added via ircd.conf
->
+o) Added 'globops', 'restart', 'dline', 'undline' and 'module' operator
->
+   privilege flags. Read doc/reference.conf for further explanation of what
->
+   these flags control
->
+o) Removed Idle-time klines
+o) Cleaned up modules API. Old modules won't work anymore
-<
+o) Remove general::burst_away configuration directive. AWAY bursts are now
->
+o) Removed general::burst_away configuration directive. AWAY bursts are now
+   controlled via connect::flags explicitly
+o) Introduced new logging subsystem including log rotation based on
+   file sizes. Log timestamp format is ISO8601 now
+   hidden_oper operator flags. With usermode +H, irc operator status can now
+   be hidden even on remote servers
+o) Added CIDR support for operator{} blocks
-<
+o) The servlink program has been removed. ircd-hybrid can now make use of SSL/TLS
-<
+   for inter-server communication.
->
+o) Removed the servlink program. ircd-hybrid can now make use of
->
+   SSL/TLS for inter-server communication.
+   NOTE: compressed server links are of course still available, but a SSL/TLS
-<
+   connection is required, as compression is now handled via the OpenSSL library
->
+   connection is required, as compression is now handled via OpenSSL
+o) Removed 'ssl_server_protocol' configuration directive and
+   added 'ssl_client_method' and 'ssl_server_method' instead.
+   Both of these options can now be changed at runtime
+--------------------------------------------------------------------------------
-–
+NOTE: This is still BETA code.  Run it at your own risk.  By running this
-–
+ code you assume FULL responsibility for any problems it may cause.  We do
-–
+ NOT recommend that you run BETA code on production IRC networks such
-–
+ as EFnet.
-–
-–
+BUGS: Major bugs in this release are listed in BUGS
-–
+BUG REPORTS: If you run this code and encounter problems, you must report
+ the bug by EMAIL to bugs@ircd-hybrid.org
+ Please include a gdb backtrace and a copy of your config.h and
+ information masked).
+DISCUSSION: There is a mailing list for discussion of hybrid issues,
-<
+ including betas.  To subscribe, use this link:
->
+ including betas. To subscribe, use this link:
+    https://lists.ircd-hybrid.org/mailman/listinfo/hybrid
-<
+ This is the proper place to discuss new features, bugs, etc.  Posting here
-<
+ is much more likely to get something done than ranting on #TZ.
->
+ This is the proper place to discuss new features, bugs, etc.
+Questions/comments directed to bugs@ircd-hybrid.org
-<
+Other files recommended for reading: BUGS, README, INSTALL
->
+Other files recommended for reading: README, INSTALL
+--------------------------------------------------------------------------------
+$Id$

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines (old)
->
+Changed lines (new)

Comparing: ircd-hybrid-8/NEWS (file contents), Revision 1432 by michael, Sat Jun 9 19:40:08 2012 UTC vs. ircd-hybrid/branches/8.2.x/NEWS (file contents), Revision 4654 by michael, Mon Sep 22 15:48:15 2014 UTC

Diff Legend

Comparing:
ircd-hybrid-8/NEWS (file contents), Revision 1432 by michael, Sat Jun 9 19:40:08 2012 UTC vs.
ircd-hybrid/branches/8.2.x/NEWS (file contents), Revision 4654 by michael, Mon Sep 22 15:48:15 2014 UTC