[ViewVC] Diff of: svn/ircd-hybrid/branches/8.2.x/NEWS

Comparing:
ircd-hybrid/trunk/NEWS (file contents), Revision 1840 by michael, Sun Apr 21 09:47:29 2013 UTC vs.
ircd-hybrid/branches/8.2.x/NEWS (file contents), Revision 9436 by michael, Thu Jun 25 13:32:20 2020 UTC

-<
+-- ircd-hybrid-8.1.0beta1 Release Notes
-<
+o) Improved WEBIRC authentication; added 'webirc' to auth::flags.
->
+-- Noteworthy changes in version 8.2.32 (2020-??-??)
->
+o) RESV couldn't be issued in case no reason has been supplied. This has been fixed.
->
+o) Fixed possible RPL_WHOISCHANNELS line truncation of remote replies
->
->
->
+-- Noteworthy changes in version 8.2.31 (2020-05-03)
->
+o) macOS compatibility fixes
->
+o) Removed 'spoof_notice' from auth::flags. With vhosts now this notice doesn't make
->
+   much sense anymore
->
+o) Fixed issue where ban masks might become malformed if set by remote clients/servers
->
+o) Fixed issue with channel mode +c where high ascii characters can be erroneously
->
+   detected as control characters
->
+o) For a full list of all changes in this release, see https://git.io/JfsmV
->
->
->
+-- Noteworthy changes in version 8.2.30 (2020-03-01)
->
+o) "QUOTE HELP extban" didn't work because the extban help file hasn't been
->
+   installed properly during 'make install'
->
+o) Fixed broken libcrypto detection which caused the ircd not to work with
->
+   openssl under certain circumstances
->
+o) Extban $n of type 'acting' has been implemented. This extban prevents
->
+   matching users from changing their nick while in the channel. Users
->
+   with voice or above are not affected.
->
+o) Channel mode +N has been changed so channel members with +v can change
->
+   their nick name as well
->
+o) For a full list of all changes in this release, see https://git.io/JfOyF
->
->
->
+-- Noteworthy changes in version 8.2.29 (2020-02-19)
->
+o) Extbans have been implemented. Currently supported extbans:
->
->
+   Matching:
->
->
+   $a:<account>   Matches users logged into a matching account.
->
+   $c:<channel>   Matches users that are on the given channel. An additional
->
+                  prefix of either @, %, or + can be specified to test for
->
+                  certain channel privileges.
->
+   $o:<class>     Matches IRC operators that have joined a class
->
+                  matching the mask.
->
+   $r:<realname>  Matches users with a matching realname.
->
+   $s:<server>    Matches users that are connected to a server matching the mask.
->
+   $u:<modes>     Matches users having the specified user modes set or not set.
->
+   $z:<certfp>    Matches users having the given TLS certificate fingerprint.
->
->
+   Acting:
->
->
+   $j:<banmask>   Prevents matching users from joining the channel.
->
+   $m:<banmask>   Blocks messages from matching users. Users with voice
->
+                  or above are not affected.
->
->
+   For more details, see help/extban.
->
+o) Added 'channel::enable_extbans' configuration option. See doc/reference.conf
->
+   for more information.
->
+o) For a full list of all changes in this release, see https://git.io/JvgAL
->
->
->
+-- Noteworthy changes in version 8.2.28 (2020-01-26)
->
+o) Fixed issue with topics set by TBURST not being propagated properly to clients
->
+o) Allow IRC operators to search for real hosts in "WHO"
->
+o) Ban/exempt/invex masks are now also tested against realhosts to prevent clients
->
+   from bypassing channel bans by activating a fakehost
->
+o) For a full list of all changes in this release, see https://git.io/Jv37M
->
->
->
+-- Noteworthy changes in version 8.2.27 (2020-01-22)
->
+o) Experimental support for wolfSSL has been implemented. Minimum supported version is 4.3.0
->
+o) The --enable-openssl, --enable-gnutls switches, and their disabling counterparts
->
+   --disable-openssl and --disable-gnutls, have been replaced with the --with-tls switch
->
+   which takes one of the following options: 'openssl', 'wolfssl', 'gnutls', and 'none'.
->
+   If nothing has been specified, configure tries to autodetect in the following order:
->
+   openssl/libressl -> gnutls -> wolfssl.
->
+o) Fixed segfault with GnuTLS/libgmp in case there's no DH parameters file
->
+   defined in 'serverinfo::ssl_dh_param_file' or if that file is missing
->
+o) The connection timeout for connect{} blocks can now be configured via
->
+   the 'connect::timeout' configuration directive
->
+o) Minimum supported OpenSSL version is 1.1.1 now
->
+o) Minimum supported GnuTLS version is 3.6.5 now
->
+o) Supported TLSv1.3 cipher suites can now be configured explicitely via the
->
+   new 'serverinfo::tls_cipher_suites' configuration directive
->
+o) In the serverinfo {} block, the following configuration directives have been renamed:
->
+     ssl_certificate_file -> tls_certificate_file
->
+     ssl_dh_param_file -> tls_dh_param_file
->
+     ssl_dh_elliptic_curve -> tls_supported_groups
->
+     ssl_cipher_list -> tls_cipher_list
->
+     ssl_message_digest_algorithm -> tls_message_digest_algorithm
->
+o) In the operator {} block, the following configuration directives have been renamed:
->
+     ssl_certificate_fingerprint -> tls_certificate_fingerprint
->
+     ssl_connection_required -> tls_connection_required
->
+o) In the connect {} block, the following configuration directives have been renamed:
->
+     ssl_cipher_list -> tls_cipher_list
->
+     ssl_certificate_fingerprint -> tls_certificate_fingerprint
->
+o) For a full list of all changes in this release, see https://git.io/Jvq9g
->
->
->
+-- Noteworthy changes in version 8.2.26 (2019-05-31)
->
+o) The 'general::tkline_expire_notices' configuration directive has been
->
+   replaced with user mode 'X'. *LINE expiration notices are sent to IRC
->
+   operators with that mode set
->
+o) Fixed issue with '/rehash conf' creating duplicated class entries
->
+   instead of updating existing ones that are already in use
->
+o) For a full list of all changes in this release, see https://git.io/fjEbq
->
->
->
+-- Noteworthy changes in version 8.2.25 (2019-04-24)
->
+o) The 'class::number_per_ip', 'class::max_local' and 'class::max_global'
->
+   configuration directives have been replaced with just 'class::number_per_ip_local'
->
+   and 'class::number_per_ip_global'. The 'class::max_local' basically was
->
+   redundant as it had the same functionality as 'class::number_per_ip'
->
+o) Adding RESVs with wildcards no longer requires administrator privileges
->
+o) The 'general::ignore_bogus_ts' configuration option has been deprecated
->
+o) TLSv1.1 and TLSv1.0 are no longer supported and have been disabled in
->
+   the openssl and gnutls module
->
+o) Minimum supported OpenSSL version is 1.0.1f now
->
+o) Minimum supported GnuTLS version is 3.5.8 now
->
+o) The 'serverinfo::vhost' and 'serverinfo:vhost6' configuration directives have
->
+   been deprecated. If you need to bind() a specific address you can specify one
->
+   in the connect {} block
->
+o) The 'connect::vhost' configuration directive has been renamed to 'connect::bind'
->
+o) For a full list of all changes in this release, see https://git.io/fjRVk
->
->
->
+-- Noteworthy changes in version 8.2.24 (2018-04-05)
->
+o) Added "STATS s" to show configured pseudo {} blocks
->
+o) Implemented channel mode 'N' which prevents users from changing their
->
+   nick while in a channel with that mode set
->
+o) Services clients are now shown with 'is a Network Service' in "WHOIS"
->
+o) For a full list of all changes in this release, see https://git.io/fjRVt
->
->
->
+-- Noteworthy changes in version 8.2.23 (2018-03-26)
->
+o) irc-operators are now able to see a user's resolved hostname in /whowas,
->
+   and /whois even if the user has a fakehost/vhost
->
+o) RPL_WELCOME now does use the rfc2812 style nick!user@host format
->
+o) Removed rudimentary libgeoip support
->
+o) Added --enable-efence switch to allow easy linking with the
->
+   electric fence memory debugger library
->
+o) "JOIN 0" is no longer supported
->
+o) Fixed bug where ircd would not remove RPL_WHOISOPERATOR based svstags
->
+   when deoppering
->
+o) Fixed 'unknown closes' statistic in "STATS t" showing invalid values sometimes
->
+o) For a full list of all changes in this release, see https://git.io/fjRVq
->
->
->
+-- Noteworthy changes in version 8.2.22 (2017-03-26)
->
+o) Implemented channel mode 'L'. Channels with that mode set can make use of an
->
+   extended ban list size specified with the new 'channel::max_bans_large'
->
+   configuraton option. This mode can be set only by irc-operators or servers.
->
+o) Implemented channel mode 'u' which hides bmask (+b/+e/+I) lists and mode changes
->
+   to non-chanops everywhere
->
+o) Fixed an issue with "TRACE" where remote servers would reply with RPL_TRACEUSER
->
+   numerics containing UIDs
->
+o) "STATS z" now shows simple memory stats of servers linked to the network
->
+o) Added support for remote "ETRACE"
->
+o) For a full list of all changes in this release, see https://git.io/fjRVO
->
->
->
+-- Noteworthy changes in version 8.2.21 (2016-11-27)
->
+o) The 'general::default_floodtime' configuration option has been added
->
+   along with the "SET FLOODTIME" command. These allow to fine-tune the
->
+   message throttling better
->
+o) Fixed an issue with /invite not showing the list of channels the
->
+   sender is invited to
->
+o) For a full list of all changes in this release, see https://git.io/fjRVG
->
->
->
+-- Noteworthy changes in version 8.2.20 (2016-11-05)
->
+o) "INFO" now shows GnuTLS/OpenSSL library/header versions
->
+o) Added 'channel::max_invites' configuration option. See doc/reference.conf
->
+   for more information.
->
+o) INVITE expirations have been implemented. Expire time can be adjusted with
->
+   the 'channel::invite_expire_time' configuration directive
->
+o) /whois notices to operators have been re-added. User mode +y is required
->
+   to see them
->
+o) The maximum line length for motd files has been increased to 320 bytes
->
+   to support multibyte encodings better
->
+o) For a full list of all changes in this release, see https://git.io/fjRVZ
->
->
->
+-- Noteworthy changes in version 8.2.19 (2016-08-21)
->
+o) Fixed a possible server name leak in "WHO" with server hiding enabled
->
+o) "WHO" now allows opers to search by IP address
->
+o) Admins no longer can see IP addresses in "STATS P" with
->
+   'serverhide::hide_server_ips' enabled
->
+o) User mode 'n' now shows nick name changes from remote clients, too
->
+o) For a full list of all changes in this release, see https://git.io/fjRVC
->
->
->
+-- Noteworthy changes in version 8.2.18 (2016-06-22)
->
+o) Fixed an assert when a client sends invalid LIST options
->
+o) Fixed invalid memory stats of channel invites in "STATS z"
->
+o) For a full list of all changes in this release, see https://git.io/fjRSx
->
->
->
+-- Noteworthy changes in version 8.2.17 (2016-04-21)
->
+o) Fixed core on "REHASH CONF" with 'general::whowas_history_length'
->
+   set to 0
->
+o) Fixed possible core on "INVITE" with 'channel::max_channels' set to 0
->
+o) For a full list of all changes in this release, see https://git.io/fjRSp
->
->
->
+-- Noteworthy changes in version 8.2.16 (2016-03-20)
->
+o) Added 'general::whowas_history_length' configuration option which
->
+   allows to define the maximum length of the WHOWAS nickname history
->
+o) Services are now allowed to override 'general::min_nonwildcard',
->
+   and 'general::min_nonwildcard_simple' settings
->
+o) Minor updates to help files
->
+o) For a full list of all changes in this release, see https://git.io/fjRSj
->
->
->
+-- Noteworthy changes in version 8.2.15 (2016-02-24)
->
+o) Added proper support for Raspbian/ARM. Gracias to Beave/2600.net
->
+   for providing a box for testing purposes.
->
+o) Fixed an assert with empty user = "" directives in auth {} blocks
->
+o) "STATS z" now shows allocated listeners
->
+o) Fixed bug where 'can_flood' auth {} flags did not work on channels
->
+o) For a full list of all changes in this release, see https://git.io/fjR9v
->
->
->
+-- Noteworthy changes in version 8.2.14 (2016-02-09)
->
+o) Fixed server clustering
->
+o) Major cleanups to the configuration subsystem
->
+o) Improvements to libGeoIP support:
->
+   - Works now with IPv6 addresses
->
+   - Added 'libgeoip_database_options', 'libgeoip_ipv4_database_file',
->
+     and 'libgeoip_ipv6_database_file' configuration directives to the
->
+     serverinfo {} block
->
+o) Further improvements to GnuTLS support
->
+o) For a full list of all changes in this release, see https://git.io/fjR9f
->
->
->
+-- Noteworthy changes in version 8.2.13 (2016-02-02)
->
+o) Implemented support for GnuTLS. Currently ./configure's autodetection
->
+   intentionally prefers OpenSSL over GnuTLS, so OpenSSL detection needs
->
+   to be disabled explicitely by using the --disable-openssl switch.
->
+o) Minimum supported GnuTLS version is 3.3.8 now
->
+o) Minimum supported OpenSSL version is 1.0.1d now
->
+o) Added support for remote REHASH: REHASH <server> <option>
->
+o) Added 'rehash:remote' irc-operator privilege flag
->
+o) Added 'rehash' type to shared {} blocks
->
+o) Fixed minor memory leak with shared {} and cluster {} blocks
->
+o) For a full list of all changes in this release, see https://git.io/fjR9J
->
->
->
+-- Noteworthy changes in version 8.2.12 (2016-01-05)
->
+#######################################################################
->
+o) IMPORTANT: Character case mapping is 'ascii' now. It is recommended
->
+   to update all servers on the network to prevent possible channel
->
+   desynchronizations and nick name collision kills
->
+#######################################################################
->
+o) Added channel mode +T which forbids NOTICEs to be sent to a channel
->
+o) Fixed minor SVSTAG memory leak
->
+o) Fixed broken PART message blocking mechanism
->
+o) ircd now makes use of up to 8 name servers that are specified in
->
+   /etc/resolv.conf
->
+o) The -klinefile, -dlinefile, etc. switches didn't work at all
->
+o) Fixed possible core on ident lookups if ircd is out of file descriptors
->
+o) Far client exit notices (+F) now show IP addresses, too
->
+o) Made idle time look nicer in "STATS v|p" by using a formatted time string
->
+o) 'general::ts_warn_delta', and 'general::ts_max_delta' can be set to 0 now
->
+o) Several code cleanups and optimizations. Improved documentation
->
+o) For a full list of all changes in this release, see https://git.io/JvLtj
->
->
->
+-- Noteworthy changes in version 8.2.11 (2015-11-19)
->
+o) Implemented IRCv3.2 invite-notify extension
->
+o) Implemented IRCv3.2 chghost extension
->
+o) Added channel::invite_delay_channel configuration option
->
+o) For a full list of all changes in this release, see https://git.io/JvLqe
->
->
->
+-- Noteworthy changes in version 8.2.10 (2015-11-06)
->
+#######################################################################
->
+o) IMPORTANT: renamed 'serverhide::links_delay' configuration directive
->
+   to 'serverhide::flatten_links_delay'
->
+#######################################################################
->
+o) Added 'serverhide::flatten_links_file' configuration option
->
+o) Fixed bug where changing 'serverhide::flatten_links_delay' on runtime
->
+   would not have any effect
->
+o) mkpasswd (tools): fixed broken bcrypt support on *BSD in conjunction
->
+   with the -s and -l switches. Dropped MD5, DES and Extended DES support.
->
+o) Removed CHALLENGE in favor of ssl certificate fingerprint enabled
->
+   operator {} blocks
->
+o) RSA keys with less than 2048 bits are no longer supported; same applies
->
+   to the DH param file
->
+o) Added missing irc-operator privilege flags to /stats o. For a full list
->
+   of flags see doc/reference.conf
->
+o) For a full list of all changes in this release, see https://git.io/JvLqJ
->
->
->
+-- Noteworthy changes in version 8.2.9 (2015-09-13)
->
+########################################################################
->
+o) IMPORTANT: database files and links.txt are now stored in /var/lib
->
+   instead of /etc, so make sure to move your k/d/x-line database files
->
+   to the new path before (re)starting the ircd
->
+########################################################################
->
+o) IMPORTANT: the splitmode logic has been removed along with the
->
+   following channel {} block configuration directives:
->
+   'default_split_user_count', 'default_split_server_count',
->
+   'no_create_on_split', 'no_join_on_split'
->
+########################################################################
->
+o) Added 'xline_exempt' to auth {} block flags
->
+o) 'serverinfo::sid' is now optional. A unique SID is now automatically
->
+   generated based on the server's name and description
->
+o) Various fixes to the mkpasswd tool
->
+o) If supported by the compiler, ircd-hybrid now compiles with
->
+   '-fstack-protector-strong' instead of '-fstack-protector'
->
+o) Services can now add RESVs (SQLINEs) that have wildcards in it
->
+o) Channel name RESVs are now sanity checked for too broad masks
->
+o) 'class::connectfreq' now works properly with values lower than 300 seconds
->
+o) Implemented IRCv3.1 account-notify extension
->
+o) The 'general::oper_pass_resv' configuration directive has been deprecated
->
+   in favor of the new 'join:resv', and 'nick:resv' irc-operator flags.
->
+   See doc/reference.conf for more information.
->
+o) Added 'resv', and 'unresv' irc-operator flags. Previously, all
->
+   irc-operators were allowed to RESV and UNRESV, regardless of configured
->
+   privileges.
->
+o) Added 'close' to irc-operator flags
->
+o) ircd is using ISO 8601 date and time notation in most places now
->
+o) For a full list of all changes in this release, see https://git.io/JvLqI
->
->
->
+-- Noteworthy changes in version 8.2.8 (2015-05-10)
->
+o) ircd now rejects remote k-line requests for user@host mask that don't
->
+   have at least 'general::min_nonwildcard' non-wildcard characters in it
->
+o) Configuration related server notices are now sent to admins only as
->
+   they potentially could leak passwords and other sensitive data to irc
->
+   operators that don't have administrator privileges
->
+o) The GLINE/GUNGLINE commands have been removed. KLINE in conjunction
->
+   with cluster {} and/or shared {} blocks is now the recommended
->
+   way to add global user@host mask based server bans
->
+o) Added dline_min_cidr, dline_min_cidr6, kline_min_cidr, and kline_min_cidr6
->
+   configuration options to the general {} block
->
+o) Fixed bug where a REHASH would clear all X-Lines and RESVs that have
->
+   been set with the XLINE/RESV commands
->
+o) Fixed broken temporary remote XLINEs
->
+o) The 'general::havent_read_conf' configuration directive has been removed
->
+o) Various code cleanups
->
+o) For a full list of all changes in this release, see https://git.io/JvLqq
->
->
->
+-- Noteworthy changes in version 8.2.7 (2015-04-05)
->
+o) Fixed a potential buffer overflow with the BMASK inter-server command
->
+o) Fixed undefined behavior in the HELP command module which could
->
+   lead to stack corruption
->
+o) Removed useless help files for inter-server commands
->
+o) For a full list of all changes in this release, see https://git.io/JfOyA
->
->
->
+-- Noteworthy changes in version 8.2.6 (2015-03-29)
->
+o) INFO now shows configured values of 'max_watch' and 'stats_m_oper_only'
->
+o) WHOWAS now shows IP addresses to irc operators
->
+o) Fixed bug that would allow remote clients to bypass the hard
->
+   limit of max WHOWAS entries to be returned
->
+o) Code cleanups and performance improvements
->
->
->
+-- Noteworthy changes in version 8.2.5 (2015-02-24)
->
+o) Fixed core on Mac OSX 10.10 and possibly some other systems when parsing
->
+   the ircd.conf with configured pseudo {} blocks
->
->
->
+-- Noteworthy changes in version 8.2.4 (2015-02-17)
->
+o) Added SVSTAG command which services may use to add tags to users which can
->
+   be seen in /whois
->
+o) Added 'oper::whois' configuration option which allows to override the default
->
+   RPL_WHOISOPERATOR numeric string shown in /whois.
->
+o) IRC operators may now use +O on a channel even if they are only a half-op
->
+o) Fixed bug where TOPIC messages were not n!u@h prefixed in case of TBURST
->
+   issued by services clients
->
->
->
+-- Noteworthy changes in version 8.2.3 (2015-02-11)
->
+########################################################################
->
+o) IMPORTANT: the following ircd.conf configuration directives have been renamed:
->
->
+   max_clients -> default_max_clients
->
+   join_flood_count -> default_join_flood_count
->
+   join_flood_time -> default_join_flood_time
->
+########################################################################
->
+o) Fixed bug where "/rehash" would always reset the "MAX", "JFLOODTIME", and
->
+   "JFLOODCOUNT" values that have been changed from within IRC via the "/set"
->
+   command
->
+o) Added channel mode +C which prevents users from sending CTCPs to a channel
->
+o) Fixes to the NOTICE/PRIVMSG anti-flood logic
->
+o) Allow to disable the NOTICE/PRIVMSG anti-flood mechanism by setting the
->
+   'general::default_floodcount' configuration option to 0
->
+o) Updated some help files
->
+o) Minor code cleanups and improvements
->
+o) Operators may now see certificate fingerprints, user modes and hidden
->
+   channels via WHOIS as well. This used to be admin only.
->
->
->
+-- Noteworthy changes in version 8.2.2 (2015-01-20)
->
+o) Implemented IRCv3.1 extended-join extension
->
+o) Channel half-ops can now use INVITE as well
->
+o) Fixed broken 'make install -jX'
->
+o) m_opme.c has been added to modules/extra. Can be used on opless channels only.
->
+o) Added 'opme' to irc-operator flags
->
+o) Updated several help files
->
+o) The 'general::hide_spoof_ips' configuration option has been deprecated
->
+o) The 'general::true_no_oper_flood' configuration option has been deprecated.
->
+   Operators still can have higher 'flood' limits with no_oper_flood = yes;
->
+   hoewever, they are no longer allowed to bypass RecvQ limits.
->
+o) Added 'general::stats_m_oper_only' configuration option
->
+o) Remote client connection notices (user mode +F) now do show IP addresses, too
->
->
->
+-- Noteworthy changes in version 8.2.1 (2014-10-21)
->
+o) Fixed bug where "UNDLINE remote.server IP" did not work as expected
->
+o) Servers are now allowed to add/remove K-/D-/X-lines and RESVs
->
+o) Usermode +G now no longer allows to override +g
->
+o) Due to potential weakness, TLS session caching and session tickets
->
+   have been disabled
->
+o) Minor improvements to TS6 implementation
->
+o) WHOWAS now shows the name of the services account a user was logged in
->
->
->
+-- Noteworthy changes in version 8.2.0 (2014-08-24)
->
+o) Successful operator logins are now announced globally via GLOBOPS
->
+o) Cleanups and improvements to the resolver code
->
+o) Cleanups and improvements to the poll() I/O event notification support
->
+o) A topic mask can now be specified within the LIST options
->
+o) All users may now see channel modes in the /list reply
->
+o) Fixed bug where "NOTICE +#somechan" did allow bypassing resv {} channels,
->
+   or channels that are set +c (no control codes)
->
+o) pseudo {} blocks also known as service aliases have been implemented.
->
+   See doc/reference.conf for more information.
->
+o) Removed 'general::services_name' configuration option. This is now no
->
+   longer needed.
->
->
->
+-- Noteworthy changes in version 8.2.0rc2 (2014-08-03)
->
+o) Improved AWAY throttling to allow for better fine-tuning. See the
->
+   newly added 'away_count' and 'away_time' configuration directives
->
+   in the general {} block
->
+o) Support for the select() I/O event notification has been dropped
->
+o) Minor code cleanups and improvements
->
->
->
+-- Noteworthy changes in version 8.2.0rc1 (2014-07-20)
->
+o) Miscellaneous code cleanups and stabilization fixes
->
+o) ./configure now requires OpenSSL 0.9.8o or above in order
->
+   to enable TLS/SSL support
->
->
->
+-- Noteworthy changes in version 8.2.0beta4 (2014-07-06)
->
+#####################################################################
->
+o) IMPORTANT: channel halfops are now an integral part of ircd-hybrid
->
+   and can't be disabled anymore
->
+#####################################################################
->
+o) Many code cleanups and improvements
->
+o) Added flood control for the INVITE command. See channel {} block in reference.conf
->
+o) Changed flood control logic for the KNOCK command. See channel {} block in reference.conf
->
+o) INVITE without any parameters now shows a list of channels a client is invited to
->
+o) The OPERWALL command has been removed. Use GLOBOPS instead
->
+o) Added 'max_channels' to class {} blocks
->
+o) Added 'throttle_count' configuration option to the general {} block
->
+o) Added 'ssl_message_digest_algorithm' configuration option to serverinfo {} block.
->
+   See doc/reference.conf for more information.
->
+o) Added support for Elliptic Curve Diffie-Hellman (ECDH). Also an elliptic curve can be
->
+   specified via the 'serverinfo::ssl_dh_elliptic_curve' configuration option.
->
+o) Removed 'ssl_server_method' and 'ssl_client_method' configuration options.
->
+   ircd now only allows TLSv1, TLSv1.1 and TLSv1.2 protocols depending
->
+   on the OpenSSL version. SSLv3 is no longer supported.
->
->
->
+-- Noteworthy changes in version 8.2.0beta3 (2014-05-26)
->
+o) Code cleanups/performance improvements
->
->
->
+-- Noteworthy changes in version 8.2.0beta2 (2014-05-15)
->
+#########################################################################
->
+o) IMPORTANT: renamed 'general::warn_no_nline' configuration directive to
->
+   'general::warn_no_connect_block'
->
+#########################################################################
->
+o) Fixed bug with WHOIS not showing a list of channel names as expected
->
+o) Added usermode +q which hides idle and signon time in WHOIS
->
+o) Added usermode +p which hides channel list in WHOIS
->
->
->
+-- Noteworthy changes in version 8.2.0beta1 (2014-04-29)
->
+o) TS6 is now mandatory. ircd is no longer backwards compatible with TS5
->
+   and below.
->
+o) SVSJOIN and SVSPART commands have been added
->
+o) Major code cleanups and refactoring. Improved overall performance
->
+o) INFO now also reports MPATH (path to main motd (Message of the Day) file)
->
+   and SPATH (Path to server executable)
->
+o) Updated several help files
->
->
->
+-- Noteworthy changes in version 8.1.20 (2014-07-20)
->
+o) Fixed XLINE not working as expected
->
+o) Fixed build with LibreSSL which hasn't compression support
->
+o) Miscellaneous stabilization and cosmetical fixes
->
+o) EGD support has been dropped
->
->
->
+-- Noteworthy changes in version 8.1.19 (2014-07-05)
->
+o) Fixed EOB logic for remote servers
->
+o) Fixed bug where opers that have the +g/+G/+R umodes set won't receive server
->
+   notices for remote CONNECT/KLINE/DLINE/XLINE/RESV attempts
->
+o) Sending messages to user@server to local targets is now no longer possible,
->
+   as this was an easy way to bypass +R/+G/+g user modes.
->
+o) Fixed splicode logic so SPLITNUM now works as expected
->
+o) Fixed UNDLINE not to require the IP address to be prepended with *@
->
->
->
+-- Noteworthy changes in version 8.1.18 (2014-06-09)
->
+o) Fixed CAP issue for certain clients
->
+o) Fixed bug where "STATS p" would show an invalid amount of irc-operators
->
+   in case there are any +H opers
->
+o) irc-operators may now no longer set a channel +O if they are only halfops (%)
->
+o) Channel halfops (%) may now no longer (de)halfop other channel members
->
+o) Channel halfops (%) may now no longer KICK other channel halfops
->
+o) Fixed compile warnings; code cleanups
->
+o) Fixed bug where the configuration parser wouldn't truncate the network name
->
+   if 'general::network_name' contains spaces
->
->
->
+-- Noteworthy changes in version 8.1.17 (2014-05-01)
->
+o) Fixed possible WATCH core
->
+o) Fixed bug where the configuration parser wouldn't take time units
->
+   into consideration for the join_flood_time and throttle_time
->
+   configuration options
->
+o) Minor LIST optimization
->
->
->
+-- Noteworthy changes in version 8.1.16 (2014-04-20)
->
+o) Fixed undefined behaviour with crypt() returning NULL
->
+   since glibc2.17 in certain cases
->
+o) Admins may now see all channel members via "WHO #channel"
->
+   regardless of channel mode +s
->
+o) Fixed corrupted "STATS U" output
->
->
->
+-- Noteworthy changes in version 8.1.15 (2014-03-29)
->
+########################################################################
->
+o) IMPORTANT: ircd binary is now again placed into bin/ instead of sbin/
->
+########################################################################
->
+o) mkpasswd in tools/ now defaults to MD5 instead of DES
->
+o) The USERS command has been removed
->
+o) Fixed issue with SVSNICK where clients self-collided when changing
->
+   just the case of the nick name, i.e. somenick -> SomeNicK
->
+o) Minor code cleanups and cosmetical fixes
->
->
->
+-- Noteworthy changes in version 8.1.14 (2014-02-25)
->
+o) WHOWAS now honors 'serverhide::disable_remote_commands'
->
+o) Improved TS6 inter-server communication
->
+o) Minor code cleanups and speed enhancements
->
+o) Added 'unxline' oper flag
->
+o) Implemented IRCv3.2 userhost-in-names extension
->
+o) ircd now allows private RSA keys larger than 2048 bits
->
+o) Fixed bug where signals stopped from working after restarting
->
+   the ircd via SIGINT
->
+o) Fixed bug where certain irc clients could not reconnect via TLS/SSL
->
+o) Fixed long-standing bug where +p channels have been shown
->
+   in the WHOIS reply
->
->
->
+-- Noteworthy changes in version 8.1.13 (2014-01-07)
->
+o) Fixed EOB not working for remote servers (resulted in fake direction notices)
->
+o) Fixed remote client connection notices for servers that are
->
+   more than one hop away
->
+o) Fixed bug where the ircd didn't timeout SSL connections that
->
+   haven't finished the SSL handshake
->
+o) Fixed several bugs with server hiding
->
+o) Updated/fixed help files
->
+o) WHOIS no longer sends a notice to +y operators
->
->
->
+-- Noteworthy changes in version 8.1.12 (2013-12-22)
->
+o) RPL_WHOISMODES now uses the 379 numeric
->
+o) Serial number is now shown on start up
->
+o) Fixed possible channel mode desynch with services
->
+o) Fixed TS6 support with LOCOPS
->
+o) Minor code cleanups
->
+o) Fixed file descriptor leak with empty help files
->
+o) Fixed issue with WEBIRC where hostnames were not validated
->
->
->
+-- Noteworthy changes in version 8.1.11 (2013-12-06)
->
+o) Administrators may now see channel modes in LIST
->
+o) Fixed compile error on BSD systems when building with kqueue()
->
->
->
+-- Noteworthy changes in version 8.1.10 (2013-11-25)
->
+o) Fixed bug with kqueue() where it occasionally dropped updates
->
+o) Changed WHOIS to show certificate fingerprint to administrators only
->
+o) The WHO reply now shows if a nickname has been registered
->
+   with NickServ. ('r' status flag)
->
+o) Fixed some flaws with server hiding
->
+o) Fixed bug where "STATS P" would leak ip addresses to remotely connected
->
+   administrators, even if 'serverhide::hide_server_ips' was set to 'yes'
->
+o) Added SVSKILL command
->
->
->
+-- Noteworthy changes in version 8.1.9 (2013-11-08)
->
+o) Added usermode +W. Users connected via a webirc gateway get this
->
+   mode set by servers.
->
+o) WHOIS now shows if a client is connected via a webirc gateway
->
+o) Administrators may now see +s channels a user is in with WHOIS.
->
+   Secret channels are prepended with a tilde in the WHOIS reply.
->
+o) Administrators are now able to see all the user modes a user has
->
+   set via WHOIS
->
->
->
+-- Noteworthy changes in version 8.1.8 (2013-10-25)
->
+o) Fixed bug that could lead to a desynchronized nick database
->
+   throughout the entire network if using services enforced
->
+   nick names (SVSNICK)
->
+o) Cleaned up/modernized build system
->
+o) Add -fstack-protector to CFLAGS if available. Basically checks for
->
+   buffer overflows/stack-smashing attacks
->
+o) When using anope 1.9/2.0 services, WHOIS now shows the account name
->
+   of a registered/identified client (numeric 330)
->
+o) Administrators can now see +s channels in the LIST reply
->
->
->
+-- Noteworthy changes in version 8.1.7 (2013-08-18)
->
+o) Fixed issue with channel mode +n having no functionality at all
->
+o) Fixed SSL certificate fingerprint validation for outgoing server connects
->
+o) Updated several documentation files
->
->
->
+-- Noteworthy changes in version 8.1.6 (2013-08-02)
->
+o) Fixed possible core with empty motd files
->
->
->
+-- Noteworthy changes in version 8.1.5 (2013-07-16)
->
+o) Fixed bug that would prevent servers from linking together
->
+   if 'connect::aftype' isn't set
->
->
->
+-- Noteworthy changes in version 8.1.4 (2013-07-05)
->
+o) Added 'xline' and 'resv' logging types. See doc/reference.conf
->
+   for more information
->
+o) Fixed bug where remote STATS requests were not rate limited
->
+o) Fixed core with empty 'auth::spoof' entries
->
+o) Increased oper/auth/connect password length limit from 20 to 128
->
+o) Minor fixes to nickflood control code
->
->
->
+-- Noteworthy changes in version 8.1.3 (2013-06-23)
->
+o) Fixed possible core on "STATS z"
->
+o) Revised doc/reference.conf
->
+o) Fixed broken --disable-libgeoip switch
->
->
->
+-- Noteworthy changes in version 8.1.2 (2013-06-20)
->
+o) Added 'general::cycle_on_host_change' configuration option
->
+o) Added 'general::stats_u_oper_only' configuration option
->
+o) Added support for SHA-256 ssl certificate fingerprint based operator {}
->
+   and connect {} blocks.
->
+   In conjunction with Anope 1.9/2.0 IRC-services, clients are now also able
->
+   to automatically identify for their nick with ssl certificate
->
+   fingerprints
->
+o) Added 'operator::ssl_connection_required' configuration option. See
->
+   doc/reference.conf for more information
->
+o) Added usermode +S (client is connected via SSL/TLS). Allows services
->
+   to keep track of what users are connected via SSL, and allows to see
->
+   ssl-status of remote clients in a /whois
->
+o) Fixed a server name leak with server hiding enabled
->
->
->
+-- Noteworthy changes in version 8.1.1 (2013-06-06)
->
+########################################################################
->
+o) IMPORTANT: moved disable_remote_command configuration directive from
->
+   general {} block to serverhide {} block
->
+########################################################################
->
+o) Minor code cleanups/performance improvements
->
+o) Fixed bug where opers could see LOCOPS messages even if they don't have
->
+   the +l mode set
->
+o) Fixed bug where non-SSL clients could join +S channels on non-SSL servers
->
+o) Implemented motd {} configuration blocks. See doc/reference.conf for more
->
+   information
->
+o) "STATS T" shows configured MOTD files
->
->
->
+-- Noteworthy changes in version 8.1.0 (2013-05-23)
->
+o) Minor code cleanups/performance improvements
->
->
->
+-- Noteworthy changes in version 8.1.0rc1 (2013-05-19)
->
+o) Fixed broken spoofs
->
->
->
+-- Noteworthy changes in version 8.1.0beta5 (2013-05-15)
->
+o) Removed 'remote', and 'global_kill' oper flags, and added 'connect',
->
+   'squit', and 'kill' flags for better fine-tuning instead. Whether or
->
+   not a specific action is allowed on a remote server can be controlled
->
+   by appending the ':remote' flag. For example: 'kill' allows only local
->
+   clients to be killed, whereas 'kill:remote' allows to issue a KILL for
->
+   remote clients
->
+o) Added 'locops' and 'wallops' to irc-operator flags
->
+o) Improve/cleanup HELP system
->
->
->
+-- Noteworthy changes in version 8.1.0beta4 (2013-05-09)
->
+o) Implemented channel mode +M. Clients that haven't identified their
->
+   name with NickServ may not speak in a channel that has this mode set
->
+o) Fixed weird idletimes shown in /trace
->
+o) Added 'nononreg' (+R) to 'general::oper_umodes'
->
+o) Added user mode +F (can see remote client connect/exit notices)
->
->
->
+-- Noteworthy changes in version 8.1.0beta3 (2013-05-05)
->
+o) PCRE support has been dropped
->
+o) "STATS o" now shows how many times an operator {} block has been used.
->
+   Similar to "STATS x|q"
->
+o) Implemented channel mode +c. Known from other ircds, this mode basically
->
+   prevents users from sending messages including control codes to a channel
->
+   that has this mode set
->
+o) Fixed bug where bans were not checked against non-channel members when
->
+   sending messages to a channel
->
+o) Removed 'channel::quiet_on_ban' configuration option. This feature is
->
+   now enabled by default
->
->
->
+-- Noteworthy changes in version 8.1.0beta2 (2013-04-28)
->
+o) Fixed broken compile with libGeoIP disabled
->
+o) Code cleanups; working towards stabilization and improved performance
->
+o) Removed operflag 'nick_changes'. Operators can now set +n at will
->
+o) Fixed shared {} blocks not working as expected
->
+o) Fixed spoofs not working as expected
->
->
->
+-- Noteworthy changes in version 8.1.0beta1 (2013-04-25)
->
+#######################################################################
->
+o) IMPORTANT: name/channel entries can't be stacked any longer within a
->
+   single resv {} block. Each entry now requires its own resv {} block.
->
+   Read doc/reference.conf for more details
->
+#######################################################################
->
+o) Added 'resv::exempt' configuration option. Exempt can be either a
->
+   ISO 3166 alpha-2 two letter country code, or a nick!user@host mask.
->
+   CIDR is supported
->
+o) Removed 'channel::restrict_channels' configuration option
->
+o) Preliminary libGeoIP support. Currently only used for exempt entries
->
+   in resv {} blocks
->
+o) Improved WEBIRC authentication; added 'webirc' to 'auth::flags'.
+   A "webirc." spoof is now no longer required
+o) Implemented new memory pool allocator which basically is based upon Tor's
+   mempool allocator for Tor cells
+o) Major code cleanups
-<
+o) Implemented new binary database storage for X-,D-,K-,G-Lines and RESVs.
->
+o) Implemented new binary database storage for X-, D-, K-, G-Lines and RESVs.
+   Temporary bans are now stored as well and will persist after a reboot
-<
+o) Channel based resv{} blocks may now contain wildcards
-<
+o) Added support for "away-notify" client capability
->
+o) Channel based resv {} blocks may now contain wildcards
+o) NICK/JOIN now shows the actual reason of reserved nick-/channelnames
-<
+o) contrib/ and its content has been removed from the tree
->
+o) contrib/ and its content has been enirely removed from the tree
->
+o) Added 'serverhide::hide_services' configuration option
->
+o) Added 'nononreg' (+R) to 'oper::umodes' and 'general::oper_only_modes'
->
+o) Implemented IRCv3.1 away-notify extension
->
-+
+-- Noteworthy changes in version 8.0.9 (2013-05-16)
-+
+o) Fixed bug where ircd would sometimes drop a services link because
-+
+   of a missing argument to the "SVSMODE" command
-+
+o) Fixed weird idletimes shown in /trace
-<
+-- ircd-hybrid-8.0.7 Release Notes
->
->
+-- Noteworthy changes in version 8.0.8 (2013-04-28)
->
+o) "STATS s" now shows configured services {} blocks as well
->
+o) Fixed compile warnings, minor code cleanups and optimizations
->
+o) Increased nickname history length to 32768
->
+o) Unidentified/unregistered nicks may not speak in +R channels
->
->
->
+-- Noteworthy changes in version 8.0.7 (2013-04-12)
+o) Services may now set a channel topic without joining the channel first
-<
+o) Fixed bug where /whois would send empty sockhost information on TS5
-<
+   servers
->
+o) Fixed bug where WHOIS would send empty sockhost information on TS5 servers
+o) Remote server connection and split notices now go to new usermode +e.
+   These previously used usermode +x.
+o) Services may now change the host of a specific user
+   via "SVSMODE <timestamp> <target> +x <hostname>"
-<
+-- ircd-hybrid-8.0.6 Release Notes
->
+-- Noteworthy changes in version 8.0.6 (2013-01-28)
+o) Fix bug where idle time sometimes is 0 even if the client didn't
+   send any private message
+o) Fixed possible core in try_parse_v4_netmask()
-<
+-- ircd-hybrid-8.0.5 Release Notes
->
+-- Noteworthy changes in version 8.0.5 (2013-01-24)
+########################################################################
+o) IMPORTANT: nick and topic lengths are now configurable via ircd.conf.
+   A max_nick_length, as well as a max_topic_length configuration option
-<
+   can now be found in the serverinfo{} block
->
+   can now be found in the serverinfo {} block
+########################################################################
-<
+o) Fixed build on GNU/Hurd as reported by Dominic Hargreaves
->
+o) Fixed build on GNU/Hurd
+o) Fixed log files not getting reopened after /rehash
+o) Improved logging of configuration file issues
+o) ircd.pid has been accidentally saved in /var instead of /var/run
+   and 'stats_e_disabled'
+o) m_webirc.c is now officially supported, and has been moved from contrib/
+   to modules/
-<
+o) /whois, /stats p, and /trace may now show fake idle times depending on
-<
+   how the new class::min_idle and class::max_idle configuration directives
-<
+   have been configured. This feature basically works in the same
-<
+   way as it does in csircd
->
+o) /whois, /stats p, and /trace may now show fake idle times depending
->
+   on how the new 'class::min_idle' and class::max_idle configuration
->
+   directives have been configured. This feature basically works in the
->
+   same way as it does in csircd
+o) The configuration parser now does support 'year' and 'month' units
-<
+-- ircd-hybrid-8.0.4 Release Notes
->
+-- Noteworthy changes in version 8.0.4 (2013-01-02)
+o) Fixed possible core on USERHOST/ISON with optimization enabled
-<
+o) Fixed bug where can_flood sometimes didn't work as expected
->
+o) Fixed bug where 'can_flood' sometimes didn't work as expected
-<
+-- ircd-hybrid-8.0.3 Release Notes
->
+-- Noteworthy changes in version 8.0.3 (2012-12-24)
+o) Fixed core on UNDLINE
+o) XLINE/KLINE/RESV/DLINE/SQUIT and KILL now have the same default reason
+   if a reason hasn't been specified
-<
+-- ircd-hybrid-8.0.2 Release Notes
->
+-- Noteworthy changes in version 8.0.2 (2012-12-20)
+o) Minor updates to the build system
+o) Fixed broken --enable-assert configure switch
+o) Fixed bug where timed events stopped from working if the system's
+   clock is running backwards
-<
+o) STATS q|Q now shows how many times a resv{} block has been matched
->
+o) STATS q|Q now shows how many times a resv {} block has been matched
+o) Fixed contributed WEBIRC module
+o) IRC operators may now again see server generated nick rejection notices
-<
+-- ircd-hybrid-8.0.1 Release Notes
->
+-- Noteworthy changes in version 8.0.1 (2012-11-04)
+o) Fixed broken CIDR support for CHALLENGE based irc operator logins
-<
+o) Fixed class limits not properly applying to oper{} blocks
->
+o) Fixed class limits not properly applying to operator {} blocks
+o) Fixed possible TBURST desynchronization with services
-<
+o) Fixed TBURST sending server's name to clients if it's a hidden server
->
+o) Fixed TBURST from leaking the server name if it's a hidden server
-<
+-- ircd-hybrid-8.0.0 Release Notes
-<
+o) Fixed possible TBURST desynchronization with services
-<
+o) Fixed TBURST sending server's name to clients if it's a hidden server
-<
-<
+-- ircd-hybrid-8.0.0 Release Notes
->
+-- Noteworthy changes in version 8.0.0 (2012-10-18)
+o) Fixed an off-by-one with spoofs. Spoofs are now also checked for
+   invalid characters
-<
+o) Removed general::use_whois_actually configuration directive. This is
-<
+   now enabled by default
->
+o) Removed 'general::use_whois_actually' configuration directive.
->
+   This is now enabled by default
+o) Minor SQUIT handling fixes
+o) Fixed bancache not being updated on CHGHOST/CHGIDENT
-<
+-- ircd-hybrid-8rc1 Release Notes
-<
+o) Removed general::client_flood configuration option and added the
-<
+   new 'recvq' configuration directive to class{} blocks.
->
+-- Noteworthy changes in version 8.0.0rc1 (2012-09-28)
->
+o) Removed 'general::client_flood' configuration option and added the
->
+   new 'recvq' configuration directive to class {} blocks.
+   The max size of a receive queue can be seen in "STATS Y"
+   for each class
+o) Allow the '[' and ']' characters in server description
-<
+-- ircd-hybrid-8beta3 Release Notes
->
+-- Noteworthy changes in version 8.0.0beta3 (2012-08-24)
+o) Fixed wrong syntax in several language files
+o) Removed &localchannels
+o) PRIVMSG to opers@some.server is no longer supported
+o) Fixed bug that could lead to topic desynchronization
-<
+o) Removed serverhide::disable_hidden configuration option
->
+o) Removed 'serverhide::disable_hidden' configuration option
+o) Dropped ircd-hybrid-6 GLINE compatibility mode
+o) Removed use_invex, use_except and use_knock configuration options.
+   These features are now enabled by default
-<
+-- ircd-hybrid-8beta2 Release Notes
-<
+o) channel::disable_fake_channels now also disables ascii 29 (mIRC italic)
->
+-- Noteworthy changes in version 8.0.0beta2 (2012-07-21)
->
+o) 'channel::disable_fake_channels' now also disables ascii 29 (mIRC italic)
+   when set to yes
-<
+o) Added channel::max_chans_per_oper configuration directive. The old way
->
+o) Added 'channel::max_chans_per_oper' configuration directive. The old way
+   was to let operators join three times the amount of max_chans_per_user
+o) Replaced MODLOAD, MODUNLOAD, MODRELOAD, MODLIST and MODRESTART commands
+   with the new MODULE command which can be fed with the LOAD, UNLOAD, RELOAD
+o) Channel keys/passwords are now case sensitive
-<
+-- ircd-hybrid-8beta1 Release Notes
->
+-- Noteworthy changes in version 8.0.0beta1 (2012-05-28)
+o) Implemented full services support, including but not limited to the
+   following changes:
+   - Added SVSNICK, and SVSMODE command handlers
+   - Added usermode +R (only registered clients may send a private message)
+   - Added channelmode +R (only registered clients may join that channel)
+   - Various services shortcuts have been added (/NS, /CS, /NICKSERV, /CHANSERV, etc.)
-<
+   - Added services{} block to ircd.conf
-<
+   - Added services_name directive to general{} block
->
+   - Added services {} block to ircd.conf
->
+   - Added services_name directive to general {} block
+   - Added GLOBOPS mainly for services compatibility, but can be used by operators, too
+o) Removed RKLINE and RXLINE commands. Regular expression based bans should
+   only be added via ircd.conf
+   these flags control
+o) Removed Idle-time klines
+o) Cleaned up modules API. Old modules won't work anymore
-<
+o) Removed general::burst_away configuration directive. AWAY bursts are now
-<
+   controlled via connect::flags explicitly
->
+o) Removed 'general::burst_away' configuration directive. AWAY bursts are now
->
+   controlled via 'connect::flags' explicitly
+o) Introduced new logging subsystem including log rotation based on
+   file sizes. Log timestamp format is ISO8601 now
+o) Added support for remote D-lines
+o) Added usermode +H which is basically a replacement for the hidden_admin and
+   hidden_oper operator flags. With usermode +H, irc operator status can now
+   be hidden even on remote servers
-<
+o) Added CIDR support for operator{} blocks
->
+o) Added CIDR support for operator {} blocks
+o) Removed the servlink program. ircd-hybrid can now make use of
+   SSL/TLS for inter-server communication.
+   NOTE: compressed server links are of course still available, but a SSL/TLS
+   added 'ssl_client_method' and 'ssl_server_method' instead.
+   Both of these options can now be changed at runtime
+o) Oper login IDs are no longer limited to NICKLEN*2
-<
+o) Removed channel::burst_topicwho configuration option. Topicsetters are
-<
+   now sent by default
->
+o) Removed 'channel::burst_topicwho' configuration option. This feature is now
->
+   enabled by default
+o) "STATS Y|y" now reports CIDR limits as well
+o) Added m_webirc.c to contrib/
+o) Overall code cleanup and speed improvements
+--------------------------------------------------------------------------------
-–
+BUGS: Major bugs in this release are listed in BUGS
-–
+BUG REPORTS: If you run this code and encounter problems, you must report
+ the bug by EMAIL to bugs@ircd-hybrid.org
+ Please include a gdb backtrace and a copy of your config.h and
+ information masked).
+DISCUSSION: There is a mailing list for discussion of hybrid issues,
-<
+ including betas.  To subscribe, use this link:
->
+ including betas. To subscribe, use this link:
+    https://lists.ircd-hybrid.org/mailman/listinfo/hybrid
-<
+ This is the proper place to discuss new features, bugs, etc.  Posting here
-<
+ is much more likely to get something done than ranting on #TZ.
->
+ This is the proper place to discuss new features, bugs, etc.
+Questions/comments directed to bugs@ircd-hybrid.org
-<
+Other files recommended for reading: BUGS, README, INSTALL
->
+Other files recommended for reading: README, INSTALL
+--------------------------------------------------------------------------------
+$Id$

Comparing:
ircd-hybrid/trunk/NEWS (property svn:keywords), Revision 1840 by michael, Sun Apr 21 09:47:29 2013 UTC vs.
ircd-hybrid/branches/8.2.x/NEWS (property svn:keywords), Revision 9436 by michael, Thu Jun 25 13:32:20 2020 UTC

#	Line 1 \| Line 1
1	<	Id Revision
1	>	Id

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines (old)
->
+Changed lines (new)

Comparing: ircd-hybrid/trunk/NEWS (file contents), Revision 1840 by michael, Sun Apr 21 09:47:29 2013 UTC vs. ircd-hybrid/branches/8.2.x/NEWS (file contents), Revision 9436 by michael, Thu Jun 25 13:32:20 2020 UTC

Comparing: ircd-hybrid/trunk/NEWS (property svn:keywords), Revision 1840 by michael, Sun Apr 21 09:47:29 2013 UTC vs. ircd-hybrid/branches/8.2.x/NEWS (property svn:keywords), Revision 9436 by michael, Thu Jun 25 13:32:20 2020 UTC

Diff Legend

Comparing:
ircd-hybrid/trunk/NEWS (file contents), Revision 1840 by michael, Sun Apr 21 09:47:29 2013 UTC vs.
ircd-hybrid/branches/8.2.x/NEWS (file contents), Revision 9436 by michael, Thu Jun 25 13:32:20 2020 UTC

Comparing:
ircd-hybrid/trunk/NEWS (property svn:keywords), Revision 1840 by michael, Sun Apr 21 09:47:29 2013 UTC vs.
ircd-hybrid/branches/8.2.x/NEWS (property svn:keywords), Revision 9436 by michael, Thu Jun 25 13:32:20 2020 UTC