1 |
-- Noteworthy changes in version 8.2.33 (2020-09-07) |
2 |
* Added `client` option to `listener::flags` |
3 |
* Added `defer` option to `listener::flags` |
4 |
* IRC operators may now use CIDR notation in `WHO` |
5 |
* For a full list of all changes in this release, see <https://git.io/JTftW> |
6 |
|
7 |
|
8 |
-- Noteworthy changes in version 8.2.32 (2020-08-16) |
9 |
* `RESV` couldn't be issued in case no reason has been supplied. This has been fixed. |
10 |
* Fixed possible `RPL_WHOISCHANNELS` line truncation of remote replies |
11 |
* Extban $t of type `matching` has been implemented. This extban allows matching |
12 |
based on TLS protocol version and/or cipher suite |
13 |
* Implemented channel mode `K`. `KNOCK` cannot be used on channels with that mode set |
14 |
* `STATS ?` is now oper-only |
15 |
* For a full list of all changes in this release, see <https://git.io/JUZa1> |
16 |
|
17 |
|
18 |
-- Noteworthy changes in version 8.2.31 (2020-05-03) |
19 |
* macOS compatibility fixes |
20 |
* Removed `spoof_notice` from `auth::flags`. With vhosts now this notice doesn't make |
21 |
much sense anymore |
22 |
* Fixed issue where ban masks might become malformed if set by remote clients/servers |
23 |
* Fixed issue with channel mode +c where high ascii characters can be erroneously |
24 |
detected as control characters |
25 |
* For a full list of all changes in this release, see <https://git.io/JUZa6> |
26 |
|
27 |
|
28 |
-- Noteworthy changes in version 8.2.30 (2020-03-01) |
29 |
* `QUOTE HELP extban` didn't work because the extban help file hasn't been |
30 |
installed properly during `make install` |
31 |
* Fixed broken libcrypto detection which caused the ircd not to work with |
32 |
openssl under certain circumstances |
33 |
* Extban $n of type `acting` has been implemented. This extban prevents |
34 |
matching users from changing their nick while in the channel. Users |
35 |
with voice or above are not affected. |
36 |
* Channel mode +N has been changed so channel members with +v can change |
37 |
their nick name as well |
38 |
* For a full list of all changes in this release, see <https://git.io/JfOyF> |
39 |
|
40 |
|
41 |
-- Noteworthy changes in version 8.2.29 (2020-02-19) |
42 |
* Extbans have been implemented. Currently supported extbans: |
43 |
|
44 |
Matching: |
45 |
|
46 |
$a:<account> Matches users logged into a matching account. |
47 |
$c:<channel> Matches users that are on the given channel. An additional |
48 |
prefix of either @, %, or + can be specified to test for |
49 |
certain channel privileges. |
50 |
$o:<class> Matches IRC operators that have joined a class |
51 |
matching the mask. |
52 |
$r:<realname> Matches users with a matching realname. |
53 |
$s:<server> Matches users that are connected to a server matching the mask. |
54 |
$u:<modes> Matches users having the specified user modes set or not set. |
55 |
$z:<certfp> Matches users having the given TLS certificate fingerprint. |
56 |
|
57 |
Acting: |
58 |
|
59 |
$j:<banmask> Prevents matching users from joining the channel. |
60 |
$m:<banmask> Blocks messages from matching users. Users with voice |
61 |
or above are not affected. |
62 |
|
63 |
For more details, see help/extban. |
64 |
* Added `channel::enable_extbans` configuration option. See `doc/reference.conf` |
65 |
for more information. |
66 |
* For a full list of all changes in this release, see <https://git.io/JvgAL> |
67 |
|
68 |
|
69 |
-- Noteworthy changes in version 8.2.28 (2020-01-26) |
70 |
* Fixed issue with topics set by `TBURST` not being propagated properly to clients |
71 |
* Allow IRC operators to search for real hosts in `WHO` |
72 |
* Ban/exempt/invex masks are now also tested against realhosts to prevent clients |
73 |
from bypassing channel bans by activating a fakehost |
74 |
* For a full list of all changes in this release, see <https://git.io/Jv37M> |
75 |
|
76 |
|
77 |
-- Noteworthy changes in version 8.2.27 (2020-01-22) |
78 |
* Experimental support for wolfSSL has been implemented. Minimum supported version is 4.3.0 |
79 |
* The `--enable-openssl`, `--enable-gnutls` switches, and their disabling counterparts |
80 |
`--disable-openssl` and `--disable-gnutls`, have been replaced with the `--with-tls` |
81 |
switch which takes one of the following options: `openssl`, `wolfssl`, `gnutls`, |
82 |
and `none`. |
83 |
If nothing has been specified, configure tries to autodetect in the following order: |
84 |
openssl/libressl -> gnutls -> wolfssl. |
85 |
* Fixed segfault with GnuTLS/libgmp in case there's no DH parameters file |
86 |
defined in `serverinfo::ssl_dh_param_file` or if that file is missing |
87 |
* The connection timeout for connect{} blocks can now be configured via |
88 |
the `connect::timeout` configuration directive |
89 |
* Minimum supported OpenSSL version is 1.1.1 now |
90 |
* Minimum supported GnuTLS version is 3.6.5 now |
91 |
* Supported TLSv1.3 cipher suites can now be configured explicitely via the |
92 |
new `serverinfo::tls_cipher_suites` configuration directive |
93 |
* In the serverinfo {} block, the following configuration directives have been renamed: |
94 |
`ssl_certificate_file` -> `tls_certificate_file` |
95 |
`ssl_dh_param_file` -> `tls_dh_param_file` |
96 |
`ssl_dh_elliptic_curve` -> `tls_supported_groups` |
97 |
`ssl_cipher_list` -> `tls_cipher_list` |
98 |
`ssl_message_digest_algorithm` -> `tls_message_digest_algorithm` |
99 |
* In the operator {} block, the following configuration directives have been renamed: |
100 |
`ssl_certificate_fingerprint -> `tls_certificate_fingerprint` |
101 |
`ssl_connection_required -> `tls_connection_required` |
102 |
* In the connect {} block, the following configuration directives have been renamed: |
103 |
`ssl_cipher_list -> `tls_cipher_list` |
104 |
`ssl_certificate_fingerprint -> `tls_certificate_fingerprint` |
105 |
* For a full list of all changes in this release, see <https://git.io/Jvq9g> |
106 |
|
107 |
|
108 |
-- Noteworthy changes in version 8.2.26 (2019-05-31) |
109 |
* The `general::tkline_expire_notices` configuration directive has been |
110 |
replaced with user mode `X`. *LINE expiration notices are sent to IRC |
111 |
operators with that mode set |
112 |
* Fixed issue with `/rehash conf` creating duplicated class entries |
113 |
instead of updating existing ones that are already in use |
114 |
* For a full list of all changes in this release, see <https://git.io/fjEbq> |
115 |
|
116 |
|
117 |
-- Noteworthy changes in version 8.2.25 (2019-04-24) |
118 |
* The `class::number_per_ip`, `class::max_local` and `class::max_global` |
119 |
configuration directives have been replaced with just `class::number_per_ip_local` |
120 |
and `class::number_per_ip_global`. The `class::max_local` basically was |
121 |
redundant as it had the same functionality as `class::number_per_ip` |
122 |
* Adding RESVs with wildcards no longer requires administrator privileges |
123 |
* The `general::ignore_bogus_ts` configuration option has been deprecated |
124 |
* TLSv1.1 and TLSv1.0 are no longer supported and have been disabled in |
125 |
the openssl and gnutls module |
126 |
* Minimum supported OpenSSL version is 1.0.1f now |
127 |
* Minimum supported GnuTLS version is 3.5.8 now |
128 |
* The `serverinfo::vhost` and `serverinfo:vhost6` configuration directives have |
129 |
been deprecated. If you need to bind() a specific address you can specify one |
130 |
in the connect {} block |
131 |
* The `connect::vhost` configuration directive has been renamed to `connect::bind` |
132 |
* For a full list of all changes in this release, see <https://git.io/fjRVk> |
133 |
|
134 |
|
135 |
-- Noteworthy changes in version 8.2.24 (2018-04-05) |
136 |
* Added `STATS s` to show configured pseudo {} blocks |
137 |
* Implemented channel mode `N` which prevents users from changing their |
138 |
nick while in a channel with that mode set |
139 |
* Services clients are now shown with `is a Network Service` in `WHOIS` |
140 |
* For a full list of all changes in this release, see <https://git.io/fjRVt> |
141 |
|
142 |
|
143 |
-- Noteworthy changes in version 8.2.23 (2018-03-26) |
144 |
* IRC operators are now able to see a user's resolved hostname in /whowas, |
145 |
and /whois even if the user has a fakehost/vhost |
146 |
* `RPL_WELCOME` now does use the rfc2812 style nick!user@host format |
147 |
* Removed rudimentary libgeoip support |
148 |
* Added `--enable-efence` switch to allow easy linking with the |
149 |
electric fence memory debugger library |
150 |
* `JOIN 0` is no longer supported |
151 |
* Fixed bug where ircd would not remove `RPL_WHOISOPERATOR` based svstags |
152 |
when deoppering |
153 |
* Fixed `unknown closes` statistic in `STATS t` showing invalid values sometimes |
154 |
* For a full list of all changes in this release, see <https://git.io/fjRVq> |
155 |
|
156 |
|
157 |
-- Noteworthy changes in version 8.2.22 (2017-03-26) |
158 |
* Implemented channel mode `L`. Channels with that mode set can make use of an |
159 |
extended ban list size specified with the new `channel::max_bans_large` |
160 |
configuraton option. This mode can be set only by IRC operators or servers. |
161 |
* Implemented channel mode `u` which hides bmask (+b/+e/+I) lists and mode changes |
162 |
to non-chanops everywhere |
163 |
* Fixed an issue with `TRACE` where remote servers would reply with `RPL_TRACEUSER` |
164 |
numerics containing UIDs |
165 |
* `STATS z` now shows simple memory stats of servers linked to the network |
166 |
* Added support for remote `ETRACE` |
167 |
* For a full list of all changes in this release, see <https://git.io/fjRVO> |
168 |
|
169 |
|
170 |
-- Noteworthy changes in version 8.2.21 (2016-11-27) |
171 |
* The `general::default_floodtime` configuration option has been added |
172 |
along with the `SET FLOODTIME` command. These allow to fine-tune the |
173 |
message throttling better |
174 |
* Fixed an issue with `INVITE` not showing the list of channels the |
175 |
sender is invited to |
176 |
* For a full list of all changes in this release, see <https://git.io/fjRVG> |
177 |
|
178 |
|
179 |
-- Noteworthy changes in version 8.2.20 (2016-11-05) |
180 |
* `INFO` now shows GnuTLS/OpenSSL library/header versions |
181 |
* Added `channel::max_invites` configuration option. See `doc/reference.conf` |
182 |
for more information. |
183 |
* `INVITE` expirations have been implemented. Expire time can be adjusted with |
184 |
the `channel::invite_expire_time` configuration directive |
185 |
* `WHOIS` notices to operators have been re-added. User mode +y is required |
186 |
to see them |
187 |
* The maximum line length for motd files has been increased to 320 bytes |
188 |
to support multibyte encodings better |
189 |
* For a full list of all changes in this release, see <https://git.io/fjRVZ> |
190 |
|
191 |
|
192 |
-- Noteworthy changes in version 8.2.19 (2016-08-21) |
193 |
* Fixed a possible server name leak in `WHO` with server hiding enabled |
194 |
* `WHO` now allows opers to search by IP address |
195 |
* Admins no longer can see IP addresses in `STATS P` with |
196 |
`serverhide::hide_server_ips` enabled |
197 |
* User mode `n` now shows nick name changes from remote clients, too |
198 |
* For a full list of all changes in this release, see <https://git.io/fjRVC> |
199 |
|
200 |
|
201 |
-- Noteworthy changes in version 8.2.18 (2016-06-22) |
202 |
* Fixed an assert when a client sends invalid `LIST` options |
203 |
* Fixed invalid memory stats of channel invites in `STATS z` |
204 |
* For a full list of all changes in this release, see <https://git.io/fjRSx> |
205 |
|
206 |
|
207 |
-- Noteworthy changes in version 8.2.17 (2016-04-21) |
208 |
* Fixed core on `REHASH CONF` with `general::whowas_history_length` |
209 |
set to 0 |
210 |
* Fixed possible core on `INVITE` with `channel::max_channels` set to 0 |
211 |
* For a full list of all changes in this release, see <https://git.io/fjRSp> |
212 |
|
213 |
|
214 |
-- Noteworthy changes in version 8.2.16 (2016-03-20) |
215 |
* Added `general::whowas_history_length` configuration option which |
216 |
allows to define the maximum length of the `WHOWAS` nickname history |
217 |
* Services are now allowed to override `general::min_nonwildcard`, |
218 |
and `general::min_nonwildcard_simple` settings |
219 |
* Minor updates to help files |
220 |
* For a full list of all changes in this release, see <https://git.io/fjRSj> |
221 |
|
222 |
|
223 |
-- Noteworthy changes in version 8.2.15 (2016-02-24) |
224 |
* Added proper support for Raspbian/ARM. Gracias to Beave/2600.net |
225 |
for providing a box for testing purposes. |
226 |
* Fixed an assert with empty `user = ""` directives in auth {} blocks |
227 |
* `STATS z` now shows allocated listeners |
228 |
* Fixed bug where `can_flood` auth {} flags did not work on channels |
229 |
* For a full list of all changes in this release, see <https://git.io/fjR9v> |
230 |
|
231 |
|
232 |
-- Noteworthy changes in version 8.2.14 (2016-02-09) |
233 |
* Fixed server clustering |
234 |
* Major cleanups to the configuration subsystem |
235 |
* Improvements to libGeoIP support: |
236 |
- Works now with IPv6 addresses |
237 |
- Added `libgeoip_database_options`, `libgeoip_ipv4_database_file`, |
238 |
and `libgeoip_ipv6_database_file` configuration directives to the |
239 |
serverinfo {} block |
240 |
* Further improvements to GnuTLS support |
241 |
* For a full list of all changes in this release, see <https://git.io/fjR9f> |
242 |
|
243 |
|
244 |
-- Noteworthy changes in version 8.2.13 (2016-02-02) |
245 |
* Implemented support for GnuTLS. Currently ./configure's autodetection |
246 |
intentionally prefers OpenSSL over GnuTLS, so OpenSSL detection needs |
247 |
to be disabled explicitely by using the `--disable-openssl` switch. |
248 |
* Minimum supported GnuTLS version is 3.3.8 now |
249 |
* Minimum supported OpenSSL version is 1.0.1d now |
250 |
* Added support for remote `REHASH`: `REHASH <server> <option>` |
251 |
* Added `rehash:remote` IRC operator privilege flag |
252 |
* Added `rehash` type to shared {} blocks |
253 |
* Fixed minor memory leak with shared {} and cluster {} blocks |
254 |
* For a full list of all changes in this release, see <https://git.io/fjR9J> |
255 |
|
256 |
|
257 |
-- Noteworthy changes in version 8.2.12 (2016-01-05) |
258 |
* **IMPORTANT:** Character case mapping is `ascii` now. It is recommended |
259 |
to update all servers on the network to prevent possible channel |
260 |
desynchronizations and nick name collision kills |
261 |
* Added channel mode +T which forbids `NOTICE` to be sent to a channel |
262 |
* Fixed minor `SVSTAG` memory leak |
263 |
* Fixed broken `PART` message blocking mechanism |
264 |
* ircd now makes use of up to 8 name servers that are specified in |
265 |
`/etc/resolv.conf` |
266 |
* The `-klinefile`, `-dlinefile`, etc. switches didn't work at all |
267 |
* Fixed possible core on ident lookups if ircd is out of file descriptors |
268 |
* Far client exit notices (+F) now show IP addresses, too |
269 |
* Made idle time look nicer in `STATS v|p` by using a formatted time string |
270 |
* `general::ts_warn_delta`, and `general::ts_max_delta` can be set to 0 now |
271 |
* For a full list of all changes in this release, see <https://git.io/JvLtj> |
272 |
|
273 |
|
274 |
-- Noteworthy changes in version 8.2.11 (2015-11-19) |
275 |
* Implemented IRCv3.2 `invite-notify extension` |
276 |
* Implemented IRCv3.2 `chghost extension` |
277 |
* Added `channel::invite_delay_channel` configuration option |
278 |
* For a full list of all changes in this release, see <https://git.io/JvLqe> |
279 |
|
280 |
|
281 |
-- Noteworthy changes in version 8.2.10 (2015-11-06) |
282 |
* **IMPORTANT:** renamed `serverhide::links_delay` configuration directive |
283 |
to `serverhide::flatten_links_delay` |
284 |
* Added `serverhide::flatten_links_file` configuration option |
285 |
* Fixed bug where changing `serverhide::flatten_links_delay` on runtime |
286 |
would not have any effect |
287 |
* mkpasswd (tools): fixed broken bcrypt support on *BSD in conjunction |
288 |
with the -s and -l switches. Dropped MD5, DES and Extended DES support. |
289 |
* Removed `CHALLENGE` in favor of ssl certificate fingerprint enabled |
290 |
operator {} blocks |
291 |
* RSA keys with less than 2048 bits are no longer supported; same applies |
292 |
to the DH param file |
293 |
* Added missing IRC operator privilege flags to `STATS o`. For a full list |
294 |
of flags see `doc/reference.conf` |
295 |
* For a full list of all changes in this release, see <https://git.io/JvLqJ> |
296 |
|
297 |
|
298 |
-- Noteworthy changes in version 8.2.9 (2015-09-13) |
299 |
* **IMPORTANT:** database files and links.txt are now stored in `/var/lib` |
300 |
instead of `/etc`, so make sure to move your k/d/x-line database files |
301 |
to the new path before (re)starting the ircd |
302 |
* **IMPORTANT:** the splitmode logic has been removed along with the |
303 |
following channel {} block configuration directives: |
304 |
`default_split_user_count`, `default_split_server_count`, |
305 |
`no_create_on_split`, `no_join_on_split` |
306 |
* Added `xline_exempt` to auth {} block flags |
307 |
* `serverinfo::sid` is now optional. A unique SID is now automatically |
308 |
generated based on the server's name and description |
309 |
* Various fixes to the mkpasswd tool |
310 |
* If supported by the compiler, ircd-hybrid now compiles with |
311 |
`-fstack-protector-strong` instead of `-fstack-protector` |
312 |
* Services can now add RESVs (SQLINEs) that have wildcards in it |
313 |
* Channel name RESVs are now sanity checked for too broad masks |
314 |
* `class::connectfreq` now works properly with values lower than 300 seconds |
315 |
* Implemented IRCv3.1 `account-notify` extension |
316 |
* The `general::oper_pass_resv` configuration directive has been deprecated |
317 |
in favor of the new `join:resv`, and `nick:resv` IRC operator flags. |
318 |
See `doc/reference.conf` for more information. |
319 |
* Added `resv`, and `unresv` IRC operator flags. Previously, all |
320 |
IRC operators were allowed to `RESV` and `UNRESV`, regardless of configured |
321 |
privileges. |
322 |
* Added `close` to IRC operator flags |
323 |
* ircd is using ISO 8601 date and time notation in most places now |
324 |
* For a full list of all changes in this release, see <https://git.io/JvLqI> |
325 |
|
326 |
|
327 |
-- Noteworthy changes in version 8.2.8 (2015-05-10) |
328 |
* ircd now rejects remote k-line requests for user@host mask that don't |
329 |
have at least `general::min_nonwildcard` non-wildcard characters in it |
330 |
* Configuration related server notices are now sent to admins only as |
331 |
they potentially could leak passwords and other sensitive data to irc |
332 |
operators that don't have administrator privileges |
333 |
* The `GLINE`/`GUNGLINE` commands have been removed. `KLINE` in conjunction |
334 |
with cluster {} and/or shared {} blocks is now the recommended |
335 |
way to add global user@host mask based server bans |
336 |
* Added `dline_min_cidr`, `dline_min_cidr6`, `kline_min_cidr`, and |
337 |
`kline_min_cidr6` configuration options to the general {} block |
338 |
* Fixed bug where a `REHASH` would clear all X-Lines and RESVs that have |
339 |
been set with the `XLINE`/`RESV commands` |
340 |
* Fixed broken temporary remote XLINEs |
341 |
* The `general::havent_read_conf` configuration directive has been removed |
342 |
* For a full list of all changes in this release, see <https://git.io/JvLqq> |
343 |
|
344 |
|
345 |
-- Noteworthy changes in version 8.2.7 (2015-04-05) |
346 |
* Fixed a potential buffer overflow with the `BMASK` inter-server command |
347 |
* Fixed undefined behavior in the `HELP` command module which could |
348 |
lead to stack corruption |
349 |
* Removed useless help files for inter-server commands |
350 |
* For a full list of all changes in this release, see <https://git.io/JfOyA> |
351 |
|
352 |
|
353 |
-- Noteworthy changes in version 8.2.6 (2015-03-29) |
354 |
* `INFO` now shows configured values of `max_watch` and `stats_m_oper_only` |
355 |
* `WHOWAS` now shows IP addresses to irc operators |
356 |
* Fixed bug that would allow remote clients to bypass the hard |
357 |
limit of max `WHOWAS` entries to be returned |
358 |
|
359 |
|
360 |
-- Noteworthy changes in version 8.2.5 (2015-02-24) |
361 |
* Fixed core on Mac OSX 10.10 and possibly some other systems when parsing |
362 |
the `ircd.conf` with configured pseudo {} blocks |
363 |
|
364 |
|
365 |
-- Noteworthy changes in version 8.2.4 (2015-02-17) |
366 |
* Added `SVSTAG` command which services may use to add tags to users which can |
367 |
be seen in `WHOIS` |
368 |
* Added `oper::whois` configuration option which allows to override the default |
369 |
`RPL_WHOISOPERATOR` numeric string shown in `WHOIS` |
370 |
* IRC operators may now use +O on a channel even if they are only a half-op |
371 |
* Fixed bug where `TOPIC` messages were not n!u@h prefixed in case of `TBURST` |
372 |
issued by services clients |
373 |
|
374 |
|
375 |
-- Noteworthy changes in version 8.2.3 (2015-02-11) |
376 |
* **IMPORTANT:** the following ircd.conf configuration directives have been renamed: |
377 |
`max_clients` -> `default_max_clients` |
378 |
`join_flood_count` -> `default_join_flood_count` |
379 |
`join_flood_time` -> `default_join_flood_time` |
380 |
* Fixed bug where `REHASH` would always reset the `MAX`, `JFLOODTIME`, and |
381 |
`JFLOODCOUNT` values that have been changed from within IRC via the `SET` |
382 |
command |
383 |
* Added channel mode +C which prevents users from sending CTCPs to a channel |
384 |
* Fixes to the NOTICE/PRIVMSG anti-flood logic |
385 |
* Allow to disable the NOTICE/PRIVMSG anti-flood mechanism by setting the |
386 |
`general::default_floodcount` configuration option to 0 |
387 |
* Updated some help files |
388 |
* Operators may now see certificate fingerprints, user modes and hidden |
389 |
channels via `WHOIS` as well. This used to be admin only. |
390 |
|
391 |
|
392 |
-- Noteworthy changes in version 8.2.2 (2015-01-20) |
393 |
* Implemented IRCv3.1 extended-join extension |
394 |
* Channel half-ops can now use `INVITE` as well |
395 |
* Fixed broken `make install -jX` |
396 |
* m_opme.c has been added to modules/extra. Can be used on opless channels only. |
397 |
* Added `opme` to IRC operator flags |
398 |
* Updated several help files |
399 |
* The `general::hide_spoof_ips` configuration option has been deprecated |
400 |
* The `general::true_no_oper_flood` configuration option has been deprecated. |
401 |
Operators still can have higher `flood` limits with `no_oper_flood = yes;` |
402 |
hoewever, they are no longer allowed to bypass RecvQ limits. |
403 |
* Added `general::stats_m_oper_only` configuration option |
404 |
* Remote client connection notices (user mode +F) now do show IP addresses, too |
405 |
|
406 |
|
407 |
-- Noteworthy changes in version 8.2.1 (2014-10-21) |
408 |
* Fixed bug where `UNDLINE remote.server IP` did not work as expected |
409 |
* Servers are now allowed to add/remove K-/D-/X-lines and RESVs |
410 |
* Usermode +G now no longer allows to override +g |
411 |
* Due to potential weakness, TLS session caching and session tickets |
412 |
have been disabled |
413 |
* Minor improvements to TS6 implementation |
414 |
* `WHOWAS` now shows the name of the services account a user was logged in |
415 |
|
416 |
|
417 |
-- Noteworthy changes in version 8.2.0 (2014-08-24) |
418 |
* Successful operator logins are now announced globally via `GLOBOPS` |
419 |
* Cleanups and improvements to the resolver code |
420 |
* Cleanups and improvements to the poll() I/O event notification support |
421 |
* A topic mask can now be specified within the `LIST` options |
422 |
* All users may now see channel modes in the `LIST` reply |
423 |
* Fixed bug where `NOTICE +#somechan` did allow bypassing resv {} channels, |
424 |
or channels that are set +c (no control codes) |
425 |
* pseudo {} blocks also known as service aliases have been implemented. |
426 |
See `doc/reference.conf` for more information. |
427 |
* Removed `general::services_name` configuration option. This is now no |
428 |
longer needed. |
429 |
|
430 |
|
431 |
-- Noteworthy changes in version 8.2.0rc2 (2014-08-03) |
432 |
* Improved AWAY throttling to allow for better fine-tuning. See the |
433 |
newly added `away_count` and `away_time` configuration directives |
434 |
in the general {} block |
435 |
* Support for the select() I/O event notification has been dropped |
436 |
|
437 |
|
438 |
-- Noteworthy changes in version 8.2.0rc1 (2014-07-20) |
439 |
* Miscellaneous code cleanups and stabilization fixes |
440 |
* `./configure` now requires OpenSSL 0.9.8o or above in order |
441 |
to enable TLS/SSL support |
442 |
|
443 |
|
444 |
-- Noteworthy changes in version 8.2.0beta4 (2014-07-06) |
445 |
* **IMPORTANT:** channel halfops are now an integral part of ircd-hybrid |
446 |
and can't be disabled anymore |
447 |
* Added flood control for the `INVITE` command. See channel {} block in reference.conf |
448 |
* Changed flood control logic for the `KNOCK` command. See channel {} block in reference.conf |
449 |
* `INVITE` without any parameters now shows a list of channels a client is invited to |
450 |
* The `OPERWALL` command has been removed. Use `GLOBOPS` instead |
451 |
* Added `max_channels` to class {} blocks |
452 |
* Added `throttle_count` configuration option to the general {} block |
453 |
* Added `ssl_message_digest_algorithm` configuration option to serverinfo {} block. |
454 |
See `doc/reference.conf` for more information. |
455 |
* Added support for Elliptic Curve Diffie-Hellman (ECDH). Also an elliptic curve can be |
456 |
specified via the `serverinfo::ssl_dh_elliptic_curve` configuration option. |
457 |
* Removed `ssl_server_method` and `ssl_client_method` configuration options. |
458 |
ircd now only allows TLSv1, TLSv1.1 and TLSv1.2 protocols depending |
459 |
on the OpenSSL version. SSLv3 is no longer supported. |
460 |
|
461 |
|
462 |
-- Noteworthy changes in version 8.2.0beta3 (2014-05-26) |
463 |
* Code cleanups/performance improvements |
464 |
|
465 |
|
466 |
-- Noteworthy changes in version 8.2.0beta2 (2014-05-15) |
467 |
* **IMPORTANT:** renamed `general::warn_no_nline` configuration directive to |
468 |
`general::warn_no_connect_block` |
469 |
* Fixed bug with `WHOIS` not showing a list of channel names as expected |
470 |
* Added usermode +q which hides idle and signon time in `WHOIS` |
471 |
* Added usermode +p which hides channel list in `WHOIS` |
472 |
|
473 |
|
474 |
-- Noteworthy changes in version 8.2.0beta1 (2014-04-29) |
475 |
* TS6 is now mandatory. ircd is no longer backwards compatible with TS5 |
476 |
and below. |
477 |
* `SVSJOIN` and `SVSPART` commands have been added |
478 |
* Major code cleanups and refactoring. Improved overall performance |
479 |
* `INFO` now also reports `MPATH` (path to main motd (Message of the Day) file) |
480 |
and `SPATH` (Path to server executable) |
481 |
* Updated several help files |
482 |
|
483 |
|
484 |
-- Noteworthy changes in version 8.1.20 (2014-07-20) |
485 |
* Fixed `XLINE` not working as expected |
486 |
* Fixed build with LibreSSL which hasn't compression support |
487 |
* Miscellaneous stabilization and cosmetical fixes |
488 |
* EGD support has been dropped |
489 |
|
490 |
|
491 |
-- Noteworthy changes in version 8.1.19 (2014-07-05) |
492 |
* Fixed `EOB` logic for remote servers |
493 |
* Fixed bug where opers that have the +g/+G/+R umodes set won't receive server |
494 |
notices for remote CONNECT/KLINE/DLINE/XLINE/RESV attempts |
495 |
* Sending messages to user@server to local targets is now no longer possible, |
496 |
as this was an easy way to bypass +R/+G/+g user modes. |
497 |
* Fixed splicode logic so `SPLITNUM` now works as expected |
498 |
* Fixed `UNDLINE` not to require the IP address to be prepended with *@ |
499 |
|
500 |
|
501 |
-- Noteworthy changes in version 8.1.18 (2014-06-09) |
502 |
* Fixed `CAP` issue for certain clients |
503 |
* Fixed bug where `STATS p` would show an invalid amount of IRC operators |
504 |
in case there are any +H opers |
505 |
* IRC operators may now no longer set a channel +O if they are only halfops (%) |
506 |
* Channel halfops (%) may now no longer (de)halfop other channel members |
507 |
* Channel halfops (%) may now no longer `KICK` other channel halfops |
508 |
* Fixed compile warnings; code cleanups |
509 |
* Fixed bug where the configuration parser wouldn't truncate the network name |
510 |
if `general::network_name` contains spaces |
511 |
|
512 |
|
513 |
-- Noteworthy changes in version 8.1.17 (2014-05-01) |
514 |
* Fixed possible `WATCH` core |
515 |
* Fixed bug where the configuration parser wouldn't take time units |
516 |
into consideration for the `join_flood_time` and `throttle_time` |
517 |
configuration options |
518 |
* Minor `LIST` optimization |
519 |
|
520 |
|
521 |
-- Noteworthy changes in version 8.1.16 (2014-04-20) |
522 |
* Fixed undefined behaviour with crypt() returning `NULL` |
523 |
since glibc2.17 in certain cases |
524 |
* Admins may now see all channel members via `WHO #channel` |
525 |
regardless of channel mode +s |
526 |
* Fixed corrupted `STATS U` output |
527 |
|
528 |
|
529 |
-- Noteworthy changes in version 8.1.15 (2014-03-29) |
530 |
* **IMPORTANT:** ircd binary is now again placed into `bin/` instead of `sbin/` |
531 |
* mkpasswd in tools/ now defaults to MD5 instead of DES |
532 |
* The `USERS` command has been removed |
533 |
* Fixed issue with `SVSNICK` where clients self-collided when changing |
534 |
just the case of the nick name, i.e. somenick -> SomeNicK |
535 |
|
536 |
|
537 |
-- Noteworthy changes in version 8.1.14 (2014-02-25) |
538 |
* WHOWAS now honors `serverhide::disable_remote_commands` |
539 |
* Improved TS6 inter-server communication |
540 |
* Added `unxline` oper flag |
541 |
* Implemented IRCv3.2 `userhost-in-names` extension |
542 |
* ircd now allows private RSA keys larger than 2048 bits |
543 |
* Fixed bug where signals stopped from working after restarting |
544 |
the ircd via SIGINT |
545 |
* Fixed bug where certain irc clients could not reconnect via TLS/SSL |
546 |
* Fixed long-standing bug where +p channels have been shown |
547 |
in the `WHOIS` reply |
548 |
|
549 |
|
550 |
-- Noteworthy changes in version 8.1.13 (2014-01-07) |
551 |
* Fixed `EOB` not working for remote servers (resulted in fake direction notices) |
552 |
* Fixed remote client connection notices for servers that are |
553 |
more than one hop away |
554 |
* Fixed bug where the ircd didn't timeout SSL connections that |
555 |
haven't finished the SSL handshake |
556 |
* Fixed several bugs with server hiding |
557 |
* Updated/fixed help files |
558 |
* `WHOIS` no longer sends a notice to +y operators |
559 |
|
560 |
|
561 |
-- Noteworthy changes in version 8.1.12 (2013-12-22) |
562 |
* `RPL_WHOISMODES` now uses the 379 numeric |
563 |
* Serial number is now shown on start up |
564 |
* Fixed possible channel mode desynch with services |
565 |
* Fixed TS6 support with `LOCOPS` |
566 |
* Minor code cleanups |
567 |
* Fixed file descriptor leak with empty help files |
568 |
* Fixed issue with `WEBIRC` where hostnames were not validated |
569 |
|
570 |
|
571 |
-- Noteworthy changes in version 8.1.11 (2013-12-06) |
572 |
* Administrators may now see channel modes in `LIST` |
573 |
* Fixed compile error on BSD systems when building with kqueue() |
574 |
|
575 |
|
576 |
-- Noteworthy changes in version 8.1.10 (2013-11-25) |
577 |
* Fixed bug with kqueue() where it occasionally dropped updates |
578 |
* Changed `WHOIS` to show certificate fingerprint to administrators only |
579 |
* The `WHO` reply now shows if a nickname has been registered |
580 |
with NickServ. (`r` status flag) |
581 |
* Fixed some flaws with server hiding |
582 |
* Fixed bug where `STATS P` would leak ip addresses to remotely connected |
583 |
administrators, even if `serverhide::hide_server_ips` was set to `yes` |
584 |
* Added `SVSKILL` command |
585 |
|
586 |
|
587 |
-- Noteworthy changes in version 8.1.9 (2013-11-08) |
588 |
* Added usermode +W. Users connected via a webirc gateway get this |
589 |
mode set by servers. |
590 |
* `WHOIS` now shows if a client is connected via a webirc gateway |
591 |
* Administrators may now see +s channels a user is in with `WHOIS`. |
592 |
Secret channels are prepended with a tilde in the `WHOIS` reply. |
593 |
* Administrators are now able to see all the user modes a user has |
594 |
set via `WHOIS` |
595 |
|
596 |
|
597 |
-- Noteworthy changes in version 8.1.8 (2013-10-25) |
598 |
* Fixed bug that could lead to a desynchronized nick database |
599 |
throughout the entire network if using services enforced |
600 |
nick names (`SVSNICK`) |
601 |
* Cleaned up/modernized build system |
602 |
* Add `-fstack-protector` to `CFLAGS` if available. Basically checks for |
603 |
buffer overflows/stack-smashing attacks |
604 |
* When using anope 1.9/2.0 services, `WHOIS` now shows the account name |
605 |
of a registered/identified client (numeric 330) |
606 |
* Administrators can now see +s channels in the `LIST` reply |
607 |
|
608 |
|
609 |
-- Noteworthy changes in version 8.1.7 (2013-08-18) |
610 |
* Fixed issue with channel mode +n having no functionality at all |
611 |
* Fixed SSL certificate fingerprint validation for outgoing server connects |
612 |
* Updated several documentation files |
613 |
|
614 |
|
615 |
-- Noteworthy changes in version 8.1.6 (2013-08-02) |
616 |
* Fixed possible core with empty motd files |
617 |
|
618 |
|
619 |
-- Noteworthy changes in version 8.1.5 (2013-07-16) |
620 |
* Fixed bug that would prevent servers from linking together |
621 |
if `connect::aftype` isn't set |
622 |
|
623 |
|
624 |
-- Noteworthy changes in version 8.1.4 (2013-07-05) |
625 |
* Added `xline` and `resv` logging types. See `doc/reference.conf` |
626 |
for more information |
627 |
* Fixed bug where remote `STATS` requests were not rate limited |
628 |
* Fixed core with empty `auth::spoof` entries |
629 |
* Increased oper/auth/connect password length limit from 20 to 128 |
630 |
* Minor fixes to nickflood control code |
631 |
|
632 |
|
633 |
-- Noteworthy changes in version 8.1.3 (2013-06-23) |
634 |
* Fixed possible core on `STATS z` |
635 |
* Revised `doc/reference.conf` |
636 |
* Fixed broken `--disable-libgeoip` switch |
637 |
|
638 |
|
639 |
-- Noteworthy changes in version 8.1.2 (2013-06-20) |
640 |
* Added `general::cycle_on_host_change` configuration option |
641 |
* Added `general::stats_u_oper_only` configuration option |
642 |
* Added support for SHA-256 ssl certificate fingerprint based operator {} |
643 |
and connect {} blocks. |
644 |
In conjunction with Anope 1.9/2.0 IRC-services, clients are now also able |
645 |
to automatically identify for their nick with ssl certificate |
646 |
fingerprints |
647 |
* Added `operator::ssl_connection_required` configuration option. See |
648 |
`doc/reference.conf` for more information |
649 |
* Added usermode +S (client is connected via SSL/TLS). Allows services |
650 |
to keep track of what users are connected via SSL, and allows to see |
651 |
ssl-status of remote clients in a `WHOIS` |
652 |
* Fixed a server name leak with server hiding enabled |
653 |
|
654 |
|
655 |
-- Noteworthy changes in version 8.1.1 (2013-06-06) |
656 |
* **IMPORTANT:** moved `disable_remote_command` configuration directive from |
657 |
general {} block to serverhide {} block |
658 |
* Minor code cleanups/performance improvements |
659 |
* Fixed bug where opers could see `LOCOPS` messages even if they don't have |
660 |
the +l mode set |
661 |
* Fixed bug where non-SSL clients could join +S channels on non-SSL servers |
662 |
* Implemented motd {} configuration blocks. See `doc/reference.conf` for more |
663 |
information |
664 |
* `STATS T` shows configured MOTD files |
665 |
|
666 |
|
667 |
-- Noteworthy changes in version 8.1.0 (2013-05-23) |
668 |
* Minor code cleanups/performance improvements |
669 |
|
670 |
|
671 |
-- Noteworthy changes in version 8.1.0rc1 (2013-05-19) |
672 |
* Fixed broken spoofs |
673 |
|
674 |
|
675 |
-- Noteworthy changes in version 8.1.0beta5 (2013-05-15) |
676 |
* Removed `remote`, and `global_kill` oper flags, and added `connect`, |
677 |
`squit`, and `kill` flags for better fine-tuning instead. Whether or |
678 |
not a specific action is allowed on a remote server can be controlled |
679 |
by appending the `:remote` flag. For example: `kill` allows only local |
680 |
clients to be killed, whereas `kill:remote` allows to issue a KILL for |
681 |
remote clients |
682 |
* Added `locops` and `wallops` to IRC operator flags |
683 |
* Improve/cleanup `HELP` system |
684 |
|
685 |
|
686 |
-- Noteworthy changes in version 8.1.0beta4 (2013-05-09) |
687 |
* Implemented channel mode +M. Clients that haven't identified their |
688 |
name with NickServ may not speak in a channel that has this mode set |
689 |
* Fixed weird idletimes shown in `TRACE` |
690 |
* Added `nononreg` (+R) to `general::oper_umodes` |
691 |
* Added user mode +F (can see remote client connect/exit notices) |
692 |
|
693 |
|
694 |
-- Noteworthy changes in version 8.1.0beta3 (2013-05-05) |
695 |
* PCRE support has been dropped |
696 |
* `STATS o` now shows how many times an operator {} block has been used. |
697 |
Similar to `STATS x|q` |
698 |
* Implemented channel mode +c. Known from other ircds, this mode basically |
699 |
prevents users from sending messages including control codes to a channel |
700 |
that has this mode set |
701 |
* Fixed bug where bans were not checked against non-channel members when |
702 |
sending messages to a channel |
703 |
* Removed `channel::quiet_on_ban` configuration option. This feature is |
704 |
now enabled by default |
705 |
|
706 |
|
707 |
-- Noteworthy changes in version 8.1.0beta2 (2013-04-28) |
708 |
* Fixed broken compile with libGeoIP disabled |
709 |
* Code cleanups; working towards stabilization and improved performance |
710 |
* Removed operflag `nick_changes`. Operators can now set +n at will |
711 |
* Fixed shared {} blocks not working as expected |
712 |
* Fixed spoofs not working as expected |
713 |
|
714 |
|
715 |
-- Noteworthy changes in version 8.1.0beta1 (2013-04-25) |
716 |
* **IMPORTANT:** name/channel entries can't be stacked any longer within a |
717 |
single resv {} block. Each entry now requires its own resv {} block. |
718 |
Read `doc/reference.conf` for more details |
719 |
* Added `resv::exempt` configuration option. Exempt can be either a |
720 |
ISO 3166 alpha-2 two letter country code, or a nick!user@host mask. |
721 |
CIDR is supported |
722 |
* Removed `channel::restrict_channels` configuration option |
723 |
* Preliminary libGeoIP support. Currently only used for exempt entries |
724 |
in resv {} blocks |
725 |
* Improved WEBIRC authentication; added `webirc` to `auth::flags`. |
726 |
A `webirc.` spoof is now no longer required |
727 |
* Implemented new memory pool allocator which basically is based upon Tor's |
728 |
mempool allocator for Tor cells |
729 |
* Implemented new binary database storage for X-, D-, K-, G-Lines and RESVs. |
730 |
Temporary bans are now stored as well and will persist after a reboot |
731 |
* Channel based resv {} blocks may now contain wildcards |
732 |
* NICK/JOIN now shows the actual reason of reserved nick-/channelnames |
733 |
* contrib/ and its content has been enirely removed from the tree |
734 |
* Added `serverhide::hide_services` configuration option |
735 |
* Added `nononreg` (+R) to `oper::umodes` and `general::oper_only_modes` |
736 |
* Implemented IRCv3.1 `away-notify` extension |
737 |
|
738 |
|
739 |
-- Noteworthy changes in version 8.0.9 (2013-05-16) |
740 |
* Fixed bug where ircd would sometimes drop a services link because |
741 |
of a missing argument to the `SVSMODE` command |
742 |
* Fixed weird idletimes shown in `TRACE` |
743 |
|
744 |
|
745 |
-- Noteworthy changes in version 8.0.8 (2013-04-28) |
746 |
* `STATS s` now shows configured services {} blocks as well |
747 |
* Fixed compile warnings, minor code cleanups and optimizations |
748 |
* Increased nickname history length to 32768 |
749 |
* Unidentified/unregistered nicks may not speak in +R channels |
750 |
|
751 |
|
752 |
-- Noteworthy changes in version 8.0.7 (2013-04-12) |
753 |
* Services may now set a channel topic without joining the channel first |
754 |
* Fixed bug where `WHOIS` would send empty sockhost information on TS5 servers |
755 |
* Remote server connection and split notices now go to new usermode +e. |
756 |
These previously used usermode +x. |
757 |
* Services may now change the host of a specific user |
758 |
via `SVSMODE <timestamp> <target> +x <hostname>` |
759 |
|
760 |
|
761 |
-- Noteworthy changes in version 8.0.6 (2013-01-28) |
762 |
* Fix bug where idle time sometimes is 0 even if the client didn't |
763 |
send any private message |
764 |
* Fixed possible core in try_parse_v4_netmask() |
765 |
|
766 |
|
767 |
-- Noteworthy changes in version 8.0.5 (2013-01-24) |
768 |
* **IMPORTANT:** nick and topic lengths are now configurable via ircd.conf. |
769 |
A `max_nick_length`, as well as a `max_topic_length` configuration option |
770 |
can now be found in the serverinfo {} block |
771 |
* Fixed build on GNU/Hurd |
772 |
* Fixed log files not getting reopened after `REHASH` |
773 |
* Improved logging of configuration file issues |
774 |
* `ircd.pid` has been accidentally saved in `/var` instead of `/var/run` |
775 |
* Linux RT signal support for notification of socket events has been dropped |
776 |
* Fixed `STATS Y|y` sometimes sending weird sendq/recvq values |
777 |
* `INFO` now also shows configured values of `disable_fake_channels`, |
778 |
and `stats_e_disabled` |
779 |
* m_webirc.c is now officially supported, and has been moved from contrib/ |
780 |
to modules/ |
781 |
* `WHOIS`, `STATS p`, and `TRACE` may now show fake idle times depending |
782 |
on how the new `class::min_idle` and `class::max_idle` configuration |
783 |
directives have been configured. This feature basically works in the |
784 |
same way as it does in csircd |
785 |
* The configuration parser now does support `year` and `month` units |
786 |
|
787 |
|
788 |
-- Noteworthy changes in version 8.0.4 (2013-01-02) |
789 |
* Fixed possible core on `USERHOST`/`ISON` with optimization enabled |
790 |
* Fixed bug where `can_flood` sometimes didn't work as expected |
791 |
|
792 |
|
793 |
-- Noteworthy changes in version 8.0.3 (2012-12-24) |
794 |
* Fixed core on `UNDLINE` |
795 |
* `XLINE`, `KLINE`, `RESV`, `DLINE`, `SQUIT`, and `KILL` now have the |
796 |
same default reason if no reason has been specified |
797 |
|
798 |
|
799 |
-- Noteworthy changes in version 8.0.2 (2012-12-20) |
800 |
* Minor updates to the build system |
801 |
* Fixed broken `--enable-assert` configure switch |
802 |
* Fixed bug where timed events stopped from working if the system's |
803 |
clock is running backwards |
804 |
* `STATS q|Q` now shows how many times a resv {} block has been matched |
805 |
* Fixed contributed WEBIRC module |
806 |
* IRC operators may now again see server generated nick rejection notices |
807 |
|
808 |
|
809 |
-- Noteworthy changes in version 8.0.1 (2012-11-04) |
810 |
* Fixed broken CIDR support for `CHALLENGE` based irc operator logins |
811 |
* Fixed class limits not properly applying to operator {} blocks |
812 |
* Fixed possible `TBURST` desynchronization with services |
813 |
* Fixed `TBURST` from leaking the server name if it's a hidden server |
814 |
|
815 |
|
816 |
-- Noteworthy changes in version 8.0.0 (2012-10-18) |
817 |
* Fixed an off-by-one with spoofs. Spoofs are now also checked for |
818 |
invalid characters |
819 |
* Removed `general::use_whois_actually` configuration directive. |
820 |
This is now enabled by default |
821 |
* Minor `SQUIT` handling fixes |
822 |
* Fixed bancache not being updated on `CHGHOST`/`CHGIDENT` |
823 |
|
824 |
|
825 |
-- Noteworthy changes in version 8.0.0rc1 (2012-09-28) |
826 |
* Removed `general::client_flood` configuration option and added the |
827 |
new `recvq` configuration directive to class {} blocks. |
828 |
The max size of a receive queue can be seen in `STATS Y` |
829 |
for each class |
830 |
* Allow the `[` and `]` characters in server description |
831 |
|
832 |
|
833 |
-- Noteworthy changes in version 8.0.0beta3 (2012-08-24) |
834 |
* Fixed wrong syntax in several language files |
835 |
* Removed &localchannels |
836 |
* `PRIVMSG` to opers@some.server is no longer supported |
837 |
* Fixed bug that could lead to topic desynchronization |
838 |
* Removed `serverhide::disable_hidden` configuration option |
839 |
* Dropped ircd-hybrid-6 `GLINE` compatibility mode |
840 |
* Removed `use_invex`, `use_except` and `use_knock` configuration options. |
841 |
These features are now enabled by default |
842 |
|
843 |
|
844 |
-- Noteworthy changes in version 8.0.0beta2 (2012-07-21) |
845 |
* `channel::disable_fake_channels` now also disables ascii 29 (mIRC italic) |
846 |
when set to yes |
847 |
* Added `channel::max_chans_per_oper` configuration directive. The old way |
848 |
was to let operators join three times the amount of max_chans_per_user |
849 |
* Replaced `MODLOAD`, `MODUNLOAD`, `MODRELOAD`, `MODLIST` and `MODRESTART` |
850 |
commands with the new `MODULE` command which can be fed with the `LOAD,` |
851 |
`UNLOAD`, `RELOAD` and `LIST` parameters. |
852 |
`MODRESTART` has been entirely removed. Use `MODULE RELOAD *` to reload |
853 |
all modules |
854 |
* Added back server notice when a client tries to obtain a reserved nick name |
855 |
* Removed `OMOTD` module |
856 |
* Added `set` to operator privilege flags. Gives access to the `SET` command |
857 |
* Improved TS6 support |
858 |
* Channel keys/passwords are now case sensitive |
859 |
|
860 |
|
861 |
-- Noteworthy changes in version 8.0.0beta1 (2012-05-28) |
862 |
* Implemented full services support, including but not limited to the |
863 |
following changes: |
864 |
- Added `SVSNICK`, and `SVSMODE` command handlers |
865 |
- Added service stamps to `NICK`/`UID` messages |
866 |
- Added SVS to server capabilities (`CAPAB`). SVS capable servers can |
867 |
deal with extended `NICK`/`UID` messages that contain service IDs/stamps. |
868 |
- Changed rejected client notices to go to new usermode +j. These |
869 |
previously used usermode +r. |
870 |
- Added usermode +r (registered nick) and channelmode +r (registered channel) |
871 |
- Added usermode +R (only registered clients may send a private message) |
872 |
- Added channelmode +R (only registered clients may join that channel) |
873 |
- Various services shortcuts have been added (`NS`, `CS`, `NICKSERV`, `CHANSERV`, etc.) |
874 |
- Added services {} block to ircd.conf |
875 |
- Added services_name directive to general {} block |
876 |
- Added `GLOBOPS` mainly for services compatibility, but can be used by operators, too |
877 |
* Removed `RKLINE` and `RXLINE` commands. Regular expression based bans should |
878 |
only be added via ircd.conf |
879 |
* Added `globops`, `restart`, `dline`, `undline` and `module` operator privilege flags. |
880 |
Read `doc/reference.conf` for further explanation of what these flags control |
881 |
* Removed Idle-time klines |
882 |
* Cleaned up modules API. Old modules won't work anymore |
883 |
* Removed `general::burst_away` configuration directive. AWAY bursts are now |
884 |
controlled via `connect::flags` explicitly |
885 |
* Introduced new logging subsystem including log rotation based on |
886 |
file sizes. Log timestamp format is ISO8601 now |
887 |
* Added support for remote D-lines |
888 |
* Added usermode +H which is basically a replacement for the hidden_admin and |
889 |
`hidden_oper` operator flags. With usermode +H, irc operator status can now |
890 |
be hidden even on remote servers |
891 |
* Added CIDR support for operator {} blocks |
892 |
* Removed the servlink program. ircd-hybrid can now make use of |
893 |
SSL/TLS for inter-server communication. |
894 |
NOTE: compressed server links are of course still available, but a SSL/TLS |
895 |
connection is required, as compression is now handled via OpenSSL |
896 |
* Removed `ssl_server_protocol` configuration directive and |
897 |
added `ssl_client_method` and `ssl_server_method` instead. |
898 |
Both of these options can now be changed at runtime |
899 |
* Oper login IDs are no longer limited to NICKLEN*2 |
900 |
* Removed `channel::burst_topicwho` configuration option. This feature is now |
901 |
enabled by default |
902 |
* `STATS Y|y` now reports CIDR limits as well |
903 |
* Added m_webirc.c to contrib/ |
904 |
* Overall code cleanup and speed improvements |
905 |
|
906 |
-------------------------------------------------------------------------------- |
907 |
|
908 |
BUG REPORTS: If you run this code and encounter problems, you must report |
909 |
the bug by EMAIL to <bugs@ircd-hybrid.org> |
910 |
Please include a gdb backtrace and a copy of your config.h and |
911 |
ircd.conf with any report (with passwords and other sensitive |
912 |
information masked). |
913 |
|
914 |
DISCUSSION: There is a mailing list for discussion of hybrid issues, |
915 |
including betas. To subscribe, use this link: |
916 |
<https://lists.ircd-hybrid.org/mailman/listinfo/hybrid> |
917 |
This is the proper place to discuss new features, bugs, etc. |
918 |
|
919 |
Questions/comments directed to <bugs@ircd-hybrid.org> |
920 |
|
921 |
Other files recommended for reading: README, INSTALL |
922 |
|
923 |
-------------------------------------------------------------------------------- |
924 |
$Id$ |