1 |
-- Noteworthy changes in version 8.2.12 (201?-??-??) |
2 |
o) Added channel mode +T which forbids NOTICEs to be sent to a channel |
3 |
o) Fixed minor SVSTAG memory leak |
4 |
o) Fixed broken PART message blocking mechanism |
5 |
o) ircd now makes use of up to 8 name servers that are specified in |
6 |
/etc/resolv.conf |
7 |
o) The -klinefile, -dlinefile, etc. switches didn't work at all |
8 |
o) Fixed possible core on ident lookup if ircd is out of file descriptors |
9 |
o) Far client exit notices (+F) now show IP addresses, too |
10 |
o) Made idle time look nicer in "STATS v|p" by using a formatted time string |
11 |
o) 'general::ts_warn_delta', and 'general::ts_max_delta' can be set to 0 now |
12 |
|
13 |
|
14 |
-- Noteworthy changes in version 8.2.11 (2015-11-19) |
15 |
o) Implemented IRCv3.2 invite-notify extension |
16 |
o) Implemented IRCv3.2 chghost extension |
17 |
o) Added channel::invite_delay_channel configuration option |
18 |
|
19 |
|
20 |
-- Noteworthy changes in version 8.2.10 (2015-11-06) |
21 |
####################################################################### |
22 |
o) IMPORTANT: renamed 'serverhide::links_delay' configuration directive |
23 |
to 'serverhide::flatten_links_delay' |
24 |
####################################################################### |
25 |
o) Added 'serverhide::flatten_links_file' configuration option |
26 |
o) Fixed bug where changing 'serverhide::flatten_links_delay' on runtime |
27 |
would not have any effect |
28 |
o) mkpasswd (tools): fixed broken bcrypt support on *BSD in conjunction |
29 |
with the -s and -l switches. Dropped MD5, DES and Extended DES support. |
30 |
o) Removed CHALLENGE in favour or ssl certificate fingerprint enabled |
31 |
operator {} blocks |
32 |
o) RSA keys with less than 2048 bits are no longer supported; same applies |
33 |
to the DH param file |
34 |
o) Added missing irc-operator privilege flags to /stats o. For a full list |
35 |
of flags see doc/reference.conf |
36 |
|
37 |
|
38 |
-- Noteworthy changes in version 8.2.9 (2015-09-13) |
39 |
######################################################################## |
40 |
o) IMPORTANT: database files and links.txt are now stored in /var/lib |
41 |
instead of /etc, so make sure to move your k/d/x-line database files |
42 |
to the new path before (re)starting the ircd |
43 |
######################################################################## |
44 |
o) IMPORTANT: the splitmode logic has been removed along with the |
45 |
following channel {} block configuration directives: |
46 |
'default_split_user_count', 'default_split_server_count', |
47 |
'no_create_on_split', 'no_join_on_split' |
48 |
######################################################################## |
49 |
o) Added 'xline_exempt' to auth {} block flags |
50 |
o) 'serverinfo::sid' is now optional. A unique SID is now automatically |
51 |
generated based on the server's name and description |
52 |
o) Various fixes to the mkpasswd tool |
53 |
o) If supported by the compiler, ircd-hybrid now compiles with |
54 |
'-fstack-protector-strong' instead of '-fstack-protector' |
55 |
o) Services can now add RESVs (SQLINEs) that have wildcards in it |
56 |
o) Channel name RESVs are now sanity checked for too broad masks |
57 |
o) 'class::connectfreq' now works properly with values lower than 300 seconds |
58 |
o) Implemented IRCv3.1 account-notify extension |
59 |
o) The 'general::oper_pass_resv' configuration directive has been deprecated |
60 |
in favor of the new 'join:resv', and 'nick:resv' irc-operator flags. |
61 |
See doc/reference.conf for more information. |
62 |
o) Added 'resv', and 'unresv' irc-operator flags. Previously, all |
63 |
irc-operators were allowed to RESV and UNRESV, regardless of configured |
64 |
privileges. |
65 |
o) Added 'close' to irc-operator flags |
66 |
o) ircd is using ISO 8601 date and time notation in most places now |
67 |
|
68 |
|
69 |
-- Noteworthy changes in version 8.2.8 (2015-05-10) |
70 |
o) ircd now rejects remote k-line requests for user@host mask that don't |
71 |
have at least 'general::min_nonwildcard' non-wildcard characters in it |
72 |
o) Configuration related server notices are now sent to admins only as |
73 |
they potentially could leak passwords and other sensitive data to irc |
74 |
operators that don't have administrator privileges |
75 |
o) The GLINE/GUNGLINE commands have been removed. KLINE in conjunction |
76 |
with cluster {} and/or shared {} blocks is now the recommended |
77 |
way to add global user@host mask based server bans |
78 |
o) Added dline_min_cidr, dline_min_cidr6, kline_min_cidr, and kline_min_cidr6 |
79 |
configuration options to the general {} block |
80 |
o) Fixed bug where a REHASH would clear all X-Lines and RESVs that have |
81 |
been set with the XLINE/RESV commands |
82 |
o) Fixed broken temporary remote XLINEs |
83 |
o) The 'general::havent_read_conf' configuration directive has been removed |
84 |
o) Various code cleanups |
85 |
|
86 |
|
87 |
-- Noteworthy changes in version 8.2.7 (2015-04-05) |
88 |
o) Fixed a potential buffer overflow with the BMASK inter-server command |
89 |
o) Fixed undefined behavior in the HELP command module which could |
90 |
lead to stack corruption |
91 |
o) Removed useless help files for inter-server commands |
92 |
|
93 |
|
94 |
-- Noteworthy changes in version 8.2.6 (2015-03-29) |
95 |
o) INFO now shows configured values of 'max_watch' and 'stats_m_oper_only' |
96 |
o) WHOWAS now shows IP addresses to irc operators |
97 |
o) Fixed bug that would allow remote clients to bypass the hard |
98 |
limit of max WHOWAS entries to be returned |
99 |
o) Code cleanups and performance improvements |
100 |
|
101 |
|
102 |
-- Noteworthy changes in version 8.2.5 (2015-02-24) |
103 |
o) Fixed core on Mac OSX 10.10 and possibly some other systems when parsing |
104 |
the ircd.conf with configured pseudo {} blocks |
105 |
|
106 |
|
107 |
-- Noteworthy changes in version 8.2.4 (2015-02-17) |
108 |
o) Added SVSTAG command which services may use to add tags to users which can |
109 |
be seen in /whois |
110 |
o) Added 'oper::whois' configuration option which allows to override the default |
111 |
RPL_WHOISOPERATOR numeric string shown in /whois. |
112 |
o) IRC operators may now use +O on a channel even if they are only a half-op |
113 |
o) Fixed bug where TOPIC messages were not n!u@h prefixed in case of TBURST |
114 |
issued by services clients |
115 |
|
116 |
|
117 |
-- Noteworthy changes in version 8.2.3 (2015-02-11) |
118 |
######################################################################## |
119 |
o) IMPORTANT: the following ircd.conf configuration directives have been renamed: |
120 |
|
121 |
max_clients -> default_max_clients |
122 |
join_flood_count -> default_join_flood_count |
123 |
join_flood_time -> default_join_flood_time |
124 |
######################################################################## |
125 |
o) Fixed bug where "/rehash" would always reset the "MAX", "JFLOODTIME", and |
126 |
"JFLOODCOUNT" values that have been changed from within IRC via the "/set" |
127 |
command |
128 |
o) Added channel mode +C which prevents users from sending CTCPs to a channel |
129 |
o) Fixes to the NOTICE/PRIVMSG anti-flood logic |
130 |
o) Allow to disable the NOTICE/PRIVMSG anti-flood mechanism by setting the |
131 |
'general::default_floodcount' configuration option to 0 |
132 |
o) Updated some help files |
133 |
o) Minor code cleanups and improvements |
134 |
o) Operators may now see certificate fingerprints, user modes and hidden |
135 |
channels via WHOIS as well. This used to be admin only. |
136 |
|
137 |
|
138 |
-- Noteworthy changes in version 8.2.2 (2015-01-20) |
139 |
o) Implemented IRCv3.1 extended-join extension |
140 |
o) Channel half-ops can now use INVITE as well |
141 |
o) Fixed broken 'make install -jX' |
142 |
o) m_opme.c has been added to modules/extra. Can be used on opless channels only. |
143 |
o) Added 'opme' to irc-operator flags |
144 |
o) Updated several help files |
145 |
o) The 'general::hide_spoof_ips' configuration option has been deprecated |
146 |
o) The 'general::true_no_oper_flood' configuration option has been deprecated. |
147 |
Operators still can have higher 'flood' limits with no_oper_flood = yes; |
148 |
hoewever, they are no longer allowed to bypass RecvQ limits. |
149 |
o) Added 'general::stats_m_oper_only' configuration option |
150 |
o) Remote client connection notices (user mode +F) now do show IP addresses, too |
151 |
|
152 |
|
153 |
-- Noteworthy changes in version 8.2.1 (2014-10-21) |
154 |
o) Fixed bug where "UNDLINE remote.server IP" did not work as expected |
155 |
o) Servers are now allowed to add/remove K-/D-/X-lines and RESVs |
156 |
o) Usermode +G now no longer allows to override +g |
157 |
o) Due to potential weakness, TLS session caching and session tickets |
158 |
have been disabled |
159 |
o) Minor improvements to TS6 implementation |
160 |
o) WHOWAS now shows the name of the services account a user was logged in |
161 |
|
162 |
|
163 |
-- Noteworthy changes in version 8.2.0 (2014-08-24) |
164 |
o) Successful operator logins are now announced globally via GLOBOPS |
165 |
o) Cleanups and improvements to the resolver code |
166 |
o) Cleanups and improvements to the poll() I/O event notification support |
167 |
o) A topic mask can now be specified within the LIST options |
168 |
o) All users may now see channel modes in the /list reply |
169 |
o) Fixed bug where "NOTICE +#somechan" did allow bypassing resv {} channels, |
170 |
or channels that are set +c (no control codes) |
171 |
o) pseudo {} blocks also known as service aliases have been implemented. |
172 |
See doc/reference.conf for more information. |
173 |
o) Removed 'general::services_name' configuration option. This is now no |
174 |
longer needed. |
175 |
|
176 |
|
177 |
-- Noteworthy changes in version 8.2.0rc2 (2014-08-03) |
178 |
o) Improved AWAY throttling to allow for better fine-tuning. See the |
179 |
newly added 'away_count' and 'away_time' configuration directives |
180 |
in the general {} block |
181 |
o) Support for the select() I/O event notification has been dropped |
182 |
o) Minor code cleanups and improvements |
183 |
|
184 |
|
185 |
-- Noteworthy changes in version 8.2.0rc1 (2014-07-20) |
186 |
o) Miscellaneous code cleanups and stabilization fixes |
187 |
o) ./configure now requires OpenSSL 0.9.8o or above in order |
188 |
to enable TLS/SSL support |
189 |
|
190 |
|
191 |
-- Noteworthy changes in version 8.2.0beta4 (2014-07-06) |
192 |
##################################################################### |
193 |
o) IMPORTANT: channel halfops are now an integral part of ircd-hybrid |
194 |
and can't be disabled anymore |
195 |
##################################################################### |
196 |
o) Many code cleanups and improvements |
197 |
o) Added flood control for the INVITE command. See channel {} block in reference.conf |
198 |
o) Changed flood control logic for the KNOCK command. See channel {} block in reference.conf |
199 |
o) INVITE without any parameters now shows a list of channels a client is invited to |
200 |
o) The OPERWALL command has been removed. Use GLOBOPS instead |
201 |
o) Added 'max_channels' to class {} blocks |
202 |
o) Added 'throttle_count' configuration option to the general {} block |
203 |
o) Added 'ssl_message_digest_algorithm' configuration option to serverinfo {} block. |
204 |
See doc/reference.conf for more information. |
205 |
o) Added support for Elliptic Curve Diffie-Hellman (ECDH). Also an elliptic curve can be |
206 |
specified via the 'serverinfo::ssl_dh_elliptic_curve' configuration option. |
207 |
o) Removed 'ssl_server_method' and 'ssl_client_method' configuration options. |
208 |
ircd now only allows TLSv1, TLSv1.1 and TLSv1.2 protocols depending |
209 |
on the OpenSSL version. SSLv3 is no longer supported. |
210 |
|
211 |
|
212 |
-- Noteworthy changes in version 8.2.0beta3 (2014-05-26) |
213 |
o) Code cleanups/performance improvements |
214 |
|
215 |
|
216 |
-- Noteworthy changes in version 8.2.0beta2 (2014-05-15) |
217 |
######################################################################### |
218 |
o) IMPORTANT: renamed 'general::warn_no_nline' configuration directive to |
219 |
'general::warn_no_connect_block' |
220 |
######################################################################### |
221 |
o) Fixed bug with WHOIS not showing a list of channel names as expected |
222 |
o) Added usermode +q which hides idle and signon time in WHOIS |
223 |
o) Added usermode +p which hides channel list in WHOIS |
224 |
|
225 |
|
226 |
-- Noteworthy changes in version 8.2.0beta1 (2014-04-29) |
227 |
o) TS6 is now mandatory. ircd is no longer backwards compatible with TS5 |
228 |
and below. |
229 |
o) SVSJOIN and SVSPART commands have been added |
230 |
o) Major code cleanups and refactoring. Improved overall performance |
231 |
o) INFO now also reports MPATH (path to main motd (Message of the Day) file) |
232 |
and SPATH (Path to server executable) |
233 |
o) Updated several help files |
234 |
|
235 |
|
236 |
-- Noteworthy changes in version 8.1.20 (2014-07-20) |
237 |
o) Fixed XLINE not working as expected |
238 |
o) Fixed build with LibreSSL which hasn't compression support |
239 |
o) Miscellaneous stabilization and cosmetical fixes |
240 |
o) EGD support has been dropped |
241 |
|
242 |
|
243 |
-- Noteworthy changes in version 8.1.19 (2014-07-05) |
244 |
o) Fixed EOB logic for remote servers |
245 |
o) Fixed bug where opers that have the +g/+G/+R umodes set won't receive server |
246 |
notices for remote CONNECT/KLINE/DLINE/XLINE/RESV attempts |
247 |
o) Sending messages to user@server to local targets is now no longer possible, |
248 |
as this was an easy way to bypass +R/+G/+g user modes. |
249 |
o) Fixed splicode logic so SPLITNUM now works as expected |
250 |
o) Fixed UNDLINE not to require the IP address to be prepended with *@ |
251 |
|
252 |
|
253 |
-- Noteworthy changes in version 8.1.18 (2014-06-09) |
254 |
o) Fixed CAP issue for certain clients |
255 |
o) Fixed bug where "STATS p" would show an invalid amount of irc-operators |
256 |
in case there are any +H opers |
257 |
o) irc-operators may now no longer set a channel +O if they are only halfops (%) |
258 |
o) Channel halfops (%) may now no longer (de)halfop other channel members |
259 |
o) Channel halfops (%) may now no longer KICK other channel halfops |
260 |
o) Fixed compile warnings; code cleanups |
261 |
o) Fixed bug where the configuration parser wouldn't truncate the network name |
262 |
if 'general::network_name' contains spaces |
263 |
|
264 |
|
265 |
-- Noteworthy changes in version 8.1.17 (2014-05-01) |
266 |
o) Fixed possible WATCH core |
267 |
o) Fixed bug where the configuration parser wouldn't take time units |
268 |
into consideration for the join_flood_time and throttle_time |
269 |
configuration options |
270 |
o) Minor LIST optimization |
271 |
|
272 |
|
273 |
-- Noteworthy changes in version 8.1.16 (2014-04-20) |
274 |
o) Fixed undefined behaviour with crypt() returning NULL |
275 |
since glibc2.17 in certain cases |
276 |
o) Admins may now see all channel members via "WHO #channel" |
277 |
regardless of channel mode +s |
278 |
o) Fixed corrupted "STATS U" output |
279 |
|
280 |
|
281 |
-- Noteworthy changes in version 8.1.15 (2014-03-29) |
282 |
######################################################################## |
283 |
o) IMPORTANT: ircd binary is now again placed into bin/ instead of sbin/ |
284 |
######################################################################## |
285 |
o) mkpasswd in tools/ now defaults to MD5 instead of DES |
286 |
o) The USERS command has been removed |
287 |
o) Fixed issue with SVSNICK where clients self-collided when changing |
288 |
just the case of the nick name, i.e. somenick -> SomeNicK |
289 |
o) Minor code cleanups and cosmetical fixes |
290 |
|
291 |
|
292 |
-- Noteworthy changes in version 8.1.14 (2014-02-25) |
293 |
o) WHOWAS now honors 'serverhide::disable_remote_commands' |
294 |
o) Improved TS6 inter-server communication |
295 |
o) Minor code cleanups and speed enhancements |
296 |
o) Added 'unxline' oper flag |
297 |
o) Implemented IRCv3.2 userhost-in-names extension |
298 |
o) ircd now allows private RSA keys larger than 2048 bits |
299 |
o) Fixed bug where signals stopped from working after restarting |
300 |
the ircd via SIGINT |
301 |
o) Fixed bug where certain irc clients could not reconnect via TLS/SSL |
302 |
o) Fixed long-standing bug where +p channels have been shown |
303 |
in the WHOIS reply |
304 |
|
305 |
|
306 |
-- Noteworthy changes in version 8.1.13 (2014-01-07) |
307 |
o) Fixed EOB not working for remote servers (resulted in fake direction notices) |
308 |
o) Fixed remote client connection notices for servers that are |
309 |
more than one hop away |
310 |
o) Fixed bug where the ircd didn't timeout SSL connections that |
311 |
haven't finished the SSL handshake |
312 |
o) Fixed several bugs with server hiding |
313 |
o) Updated/fixed help files |
314 |
o) WHOIS no longer sends a notice to +y operators |
315 |
|
316 |
|
317 |
-- Noteworthy changes in version 8.1.12 (2013-12-22) |
318 |
o) RPL_WHOISMODES now uses the 379 numeric |
319 |
o) Serial number is now shown on start up |
320 |
o) Fixed possible channel mode desynch with services |
321 |
o) Fixed TS6 support with LOCOPS |
322 |
o) Minor code cleanups |
323 |
o) Fixed file descriptor leak with empty help files |
324 |
o) Fixed issue with WEBIRC where hostnames were not validated |
325 |
|
326 |
|
327 |
-- Noteworthy changes in version 8.1.11 (2013-12-06) |
328 |
o) Administrators may now see channel modes in LIST |
329 |
o) Fixed compile error on BSD systems when building with kqueue() |
330 |
|
331 |
|
332 |
-- Noteworthy changes in version 8.1.10 (2013-11-25) |
333 |
o) Fixed bug with kqueue() where it occasionally dropped updates |
334 |
o) Changed WHOIS to show certificate fingerprint to administrators only |
335 |
o) The WHO reply now shows if a nickname has been registered |
336 |
with NickServ. ('r' status flag) |
337 |
o) Fixed some flaws with server hiding |
338 |
o) Fixed bug where "STATS P" would leak ip addresses to remotely connected |
339 |
administrators, even if 'serverhide::hide_server_ips' was set to 'yes' |
340 |
o) Added SVSKILL command |
341 |
|
342 |
|
343 |
-- Noteworthy changes in version 8.1.9 (2013-11-08) |
344 |
o) Added usermode +W. Users connected via a webirc gateway get this |
345 |
mode set by servers. |
346 |
o) WHOIS now shows if a client is connected via a webirc gateway |
347 |
o) Administrators may now see +s channels a user is in with WHOIS. |
348 |
Secret channels are prepended with a tilde in the WHOIS reply. |
349 |
o) Administrators are now able to see all the user modes a user has |
350 |
set via WHOIS |
351 |
|
352 |
|
353 |
-- Noteworthy changes in version 8.1.8 (2013-10-25) |
354 |
o) Fixed bug that could lead to a desynchronized nick database |
355 |
throughout the entire network if using services enforced |
356 |
nick names (SVSNICK) |
357 |
o) Cleaned up/modernized build system |
358 |
o) Add -fstack-protector to CFLAGS if available. Basically checks for |
359 |
buffer overflows/stack-smashing attacks |
360 |
o) When using anope 1.9/2.0 services, WHOIS now shows the account name |
361 |
of a registered/identified client (numeric 330) |
362 |
o) Administrators can now see +s channels in the LIST reply |
363 |
|
364 |
|
365 |
-- Noteworthy changes in version 8.1.7 (2013-08-18) |
366 |
o) Fixed issue with channel mode +n having no functionality at all |
367 |
o) Fixed SSL certificate fingerprint validation for outgoing server connects |
368 |
o) Updated several documentation files |
369 |
|
370 |
|
371 |
-- Noteworthy changes in version 8.1.6 (2013-08-02) |
372 |
o) Fixed possible core with empty motd files |
373 |
|
374 |
|
375 |
-- Noteworthy changes in version 8.1.5 (2013-07-16) |
376 |
o) Fixed bug that would prevent servers from linking together |
377 |
if 'connect::aftype' isn't set |
378 |
|
379 |
|
380 |
-- Noteworthy changes in version 8.1.4 (2013-07-05) |
381 |
o) Added 'xline' and 'resv' logging types. See doc/reference.conf |
382 |
for more information |
383 |
o) Fixed bug where remote STATS requests were not rate limited |
384 |
o) Fixed core with empty 'auth::spoof' entries |
385 |
o) Increased oper/auth/connect password length limit from 20 to 128 |
386 |
o) Minor fixes to nickflood control code |
387 |
|
388 |
|
389 |
-- Noteworthy changes in version 8.1.3 (2013-06-23) |
390 |
o) Fixed possible core on "STATS z" |
391 |
o) Revised doc/reference.conf |
392 |
o) Fixed broken --disable-libgeoip switch |
393 |
|
394 |
|
395 |
-- Noteworthy changes in version 8.1.2 (2013-06-20) |
396 |
o) Added 'general::cycle_on_host_change' configuration option |
397 |
o) Added 'general::stats_u_oper_only' configuration option |
398 |
o) Added support for SHA-256 ssl certificate fingerprint based operator {} |
399 |
and connect {} blocks. |
400 |
In conjunction with Anope 1.9/2.0 IRC-services, clients are now also able |
401 |
to automatically identify for their nick with ssl certificate |
402 |
fingerprints |
403 |
o) Added 'operator::ssl_connection_required' configuration option. See |
404 |
doc/reference.conf for more information |
405 |
o) Added usermode +S (client is connected via SSL/TLS). Allows services |
406 |
to keep track of what users are connected via SSL, and allows to see |
407 |
ssl-status of remote clients in a /whois |
408 |
o) Fixed a server name leak with server hiding enabled |
409 |
|
410 |
|
411 |
-- Noteworthy changes in version 8.1.1 (2013-06-06) |
412 |
######################################################################## |
413 |
o) IMPORTANT: moved disable_remote_command configuration directive from |
414 |
general {} block to serverhide {} block |
415 |
######################################################################## |
416 |
o) Minor code cleanups/performance improvements |
417 |
o) Fixed bug where opers could see LOCOPS messages even if they don't have |
418 |
the +l mode set |
419 |
o) Fixed bug where non-SSL clients could join +S channels on non-SSL servers |
420 |
o) Implemented motd {} configuration blocks. See doc/reference.conf for more |
421 |
information |
422 |
o) "STATS T" shows configured MOTD files |
423 |
|
424 |
|
425 |
-- Noteworthy changes in version 8.1.0 (2013-05-23) |
426 |
o) Minor code cleanups/performance improvements |
427 |
|
428 |
|
429 |
-- Noteworthy changes in version 8.1.0rc1 (2013-05-19) |
430 |
o) Fixed broken spoofs |
431 |
|
432 |
|
433 |
-- Noteworthy changes in version 8.1.0beta5 (2013-05-15) |
434 |
o) Removed 'remote', and 'global_kill' oper flags, and added 'connect', |
435 |
'squit', and 'kill' flags for better fine-tuning instead. Whether or |
436 |
not a specific action is allowed on a remote server can be controlled |
437 |
by appending the ':remote' flag. For example: 'kill' allows only local |
438 |
clients to be killed, whereas 'kill:remote' allows to issue a KILL for |
439 |
remote clients |
440 |
o) Added 'locops' and 'wallops' to irc-operator flags |
441 |
o) Improve/cleanup HELP system |
442 |
|
443 |
|
444 |
-- Noteworthy changes in version 8.1.0beta4 (2013-05-09) |
445 |
o) Implemented channel mode +M. Clients that haven't identified their |
446 |
name with NickServ may not speak in a channel that has this mode set |
447 |
o) Fixed weird idletimes shown in /trace |
448 |
o) Added 'nononreg' (+R) to 'general::oper_umodes' |
449 |
o) Added user mode +F (can see remote client connect/exit notices) |
450 |
|
451 |
|
452 |
-- Noteworthy changes in version 8.1.0beta3 (2013-05-05) |
453 |
o) PCRE support has been dropped |
454 |
o) "STATS o" now shows how many times an operator {} block has been used. |
455 |
Similar to "STATS x|q" |
456 |
o) Implemented channel mode +c. Known from other ircds, this mode basically |
457 |
prevents users from sending messages including control codes to a channel |
458 |
that has this mode set |
459 |
o) Fixed bug where bans were not checked against non-channel members when |
460 |
sending messages to a channel |
461 |
o) Removed 'channel::quiet_on_ban' configuration option. This feature is |
462 |
now enabled by default |
463 |
|
464 |
|
465 |
-- Noteworthy changes in version 8.1.0beta2 (2013-04-28) |
466 |
o) Fixed broken compile with libGeoIP disabled |
467 |
o) Code cleanups; working towards stabilization and improved performance |
468 |
o) Removed operflag 'nick_changes'. Operators can now set +n at will |
469 |
o) Fixed shared {} blocks not working as expected |
470 |
o) Fixed spoofs not working as expected |
471 |
|
472 |
|
473 |
-- Noteworthy changes in version 8.1.0beta1 (2013-04-25) |
474 |
####################################################################### |
475 |
o) IMPORTANT: name/channel entries can't be stacked any longer within a |
476 |
single resv {} block. Each entry now requires its own resv {} block. |
477 |
Read doc/reference.conf for more details |
478 |
####################################################################### |
479 |
o) Added 'resv::exempt' configuration option. Exempt can be either a |
480 |
ISO 3166 alpha-2 two letter country code, or a nick!user@host mask. |
481 |
CIDR is supported |
482 |
o) Removed 'channel::restrict_channels' configuration option |
483 |
o) Preliminary libGeoIP support. Currently only used for exempt entries |
484 |
in resv {} blocks |
485 |
o) Improved WEBIRC authentication; added 'webirc' to 'auth::flags'. |
486 |
A "webirc." spoof is now no longer required |
487 |
o) Implemented new memory pool allocator which basically is based upon Tor's |
488 |
mempool allocator for Tor cells |
489 |
o) Major code cleanups |
490 |
o) Implemented new binary database storage for X-, D-, K-, G-Lines and RESVs. |
491 |
Temporary bans are now stored as well and will persist after a reboot |
492 |
o) Channel based resv {} blocks may now contain wildcards |
493 |
o) NICK/JOIN now shows the actual reason of reserved nick-/channelnames |
494 |
o) contrib/ and its content has been enirely removed from the tree |
495 |
o) Added 'serverhide::hide_services' configuration option |
496 |
o) Added 'nononreg' (+R) to 'oper::umodes' and 'general::oper_only_modes' |
497 |
o) Implemented IRCv3.1 away-notify extension |
498 |
|
499 |
|
500 |
-- Noteworthy changes in version 8.0.9 (2013-05-16) |
501 |
o) Fixed bug where ircd would sometimes drop a services link because |
502 |
of a missing argument to the "SVSMODE" command |
503 |
o) Fixed weird idletimes shown in /trace |
504 |
|
505 |
|
506 |
-- Noteworthy changes in version 8.0.8 (2013-04-28) |
507 |
o) "STATS s" now shows configured services {} blocks as well |
508 |
o) Fixed compile warnings, minor code cleanups and optimizations |
509 |
o) Increased nickname history length to 32768 |
510 |
o) Unidentified/unregistered nicks may not speak in +R channels |
511 |
|
512 |
|
513 |
-- Noteworthy changes in version 8.0.7 (2013-04-12) |
514 |
o) Services may now set a channel topic without joining the channel first |
515 |
o) Fixed bug where WHOIS would send empty sockhost information on TS5 servers |
516 |
o) Remote server connection and split notices now go to new usermode +e. |
517 |
These previously used usermode +x. |
518 |
o) Services may now change the host of a specific user |
519 |
via "SVSMODE <timestamp> <target> +x <hostname>" |
520 |
|
521 |
|
522 |
-- Noteworthy changes in version 8.0.6 (2013-01-28) |
523 |
o) Fix bug where idle time sometimes is 0 even if the client didn't |
524 |
send any private message |
525 |
o) Fixed possible core in try_parse_v4_netmask() |
526 |
|
527 |
|
528 |
-- Noteworthy changes in version 8.0.5 (2013-01-24) |
529 |
######################################################################## |
530 |
o) IMPORTANT: nick and topic lengths are now configurable via ircd.conf. |
531 |
A max_nick_length, as well as a max_topic_length configuration option |
532 |
can now be found in the serverinfo {} block |
533 |
######################################################################## |
534 |
o) Fixed build on GNU/Hurd |
535 |
o) Fixed log files not getting reopened after /rehash |
536 |
o) Improved logging of configuration file issues |
537 |
o) ircd.pid has been accidentally saved in /var instead of /var/run |
538 |
o) Linux RT signal support for notification of socket events has been dropped |
539 |
o) Fixed "STATS Y|y" sometimes sending weird sendq/recvq values |
540 |
o) INFO now also shows configured values of 'disable_fake_channels', |
541 |
and 'stats_e_disabled' |
542 |
o) m_webirc.c is now officially supported, and has been moved from contrib/ |
543 |
to modules/ |
544 |
o) /whois, /stats p, and /trace may now show fake idle times depending |
545 |
on how the new 'class::min_idle' and class::max_idle configuration |
546 |
directives have been configured. This feature basically works in the |
547 |
same way as it does in csircd |
548 |
o) The configuration parser now does support 'year' and 'month' units |
549 |
|
550 |
|
551 |
-- Noteworthy changes in version 8.0.4 (2013-01-02) |
552 |
o) Fixed possible core on USERHOST/ISON with optimization enabled |
553 |
o) Fixed bug where 'can_flood' sometimes didn't work as expected |
554 |
|
555 |
|
556 |
-- Noteworthy changes in version 8.0.3 (2012-12-24) |
557 |
o) Fixed core on UNDLINE |
558 |
o) XLINE/KLINE/RESV/DLINE/SQUIT and KILL now have the same default reason |
559 |
if a reason hasn't been specified |
560 |
|
561 |
|
562 |
-- Noteworthy changes in version 8.0.2 (2012-12-20) |
563 |
o) Minor updates to the build system |
564 |
o) Fixed broken --enable-assert configure switch |
565 |
o) Fixed bug where timed events stopped from working if the system's |
566 |
clock is running backwards |
567 |
o) STATS q|Q now shows how many times a resv {} block has been matched |
568 |
o) Fixed contributed WEBIRC module |
569 |
o) IRC operators may now again see server generated nick rejection notices |
570 |
|
571 |
|
572 |
-- Noteworthy changes in version 8.0.1 (2012-11-04) |
573 |
o) Fixed broken CIDR support for CHALLENGE based irc operator logins |
574 |
o) Fixed class limits not properly applying to operator {} blocks |
575 |
o) Fixed possible TBURST desynchronization with services |
576 |
o) Fixed TBURST from leaking the server name if it's a hidden server |
577 |
|
578 |
|
579 |
-- Noteworthy changes in version 8.0.0 (2012-10-18) |
580 |
o) Fixed an off-by-one with spoofs. Spoofs are now also checked for |
581 |
invalid characters |
582 |
o) Removed 'general::use_whois_actually' configuration directive. |
583 |
This is now enabled by default |
584 |
o) Minor SQUIT handling fixes |
585 |
o) Fixed bancache not being updated on CHGHOST/CHGIDENT |
586 |
|
587 |
|
588 |
-- Noteworthy changes in version 8.0.0rc1 (2012-09-28) |
589 |
o) Removed 'general::client_flood' configuration option and added the |
590 |
new 'recvq' configuration directive to class {} blocks. |
591 |
The max size of a receive queue can be seen in "STATS Y" |
592 |
for each class |
593 |
o) Allow the '[' and ']' characters in server description |
594 |
|
595 |
|
596 |
-- Noteworthy changes in version 8.0.0beta3 (2012-08-24) |
597 |
o) Fixed wrong syntax in several language files |
598 |
o) Removed &localchannels |
599 |
o) PRIVMSG to opers@some.server is no longer supported |
600 |
o) Fixed bug that could lead to topic desynchronization |
601 |
o) Removed 'serverhide::disable_hidden' configuration option |
602 |
o) Dropped ircd-hybrid-6 GLINE compatibility mode |
603 |
o) Removed use_invex, use_except and use_knock configuration options. |
604 |
These features are now enabled by default |
605 |
|
606 |
|
607 |
-- Noteworthy changes in version 8.0.0beta2 (2012-07-21) |
608 |
o) 'channel::disable_fake_channels' now also disables ascii 29 (mIRC italic) |
609 |
when set to yes |
610 |
o) Added 'channel::max_chans_per_oper' configuration directive. The old way |
611 |
was to let operators join three times the amount of max_chans_per_user |
612 |
o) Replaced MODLOAD, MODUNLOAD, MODRELOAD, MODLIST and MODRESTART commands |
613 |
with the new MODULE command which can be fed with the LOAD, UNLOAD, RELOAD |
614 |
and LIST parameters. |
615 |
MODRESTART has been entirely removed. Use "MODULE RELOAD *" to reload |
616 |
all modules |
617 |
o) Added back server notice when a client tries to obtain a reserved nick name |
618 |
o) Removed OMOTD module |
619 |
o) Added 'set' to operator privilege flags. Gives access to the "SET" command |
620 |
o) Improved TS6 support |
621 |
o) Channel keys/passwords are now case sensitive |
622 |
|
623 |
|
624 |
-- Noteworthy changes in version 8.0.0beta1 (2012-05-28) |
625 |
o) Implemented full services support, including but not limited to the |
626 |
following changes: |
627 |
- Added SVSNICK, and SVSMODE command handlers |
628 |
- Added service stamps to NICK/UID messages |
629 |
- Added SVS to server capabilities (CAPAB). SVS capable servers can |
630 |
deal with extended NICK/UID messages that contain service IDs/stamps. |
631 |
- Changed rejected client notices to go to new usermode +j. These |
632 |
previously used usermode +r. |
633 |
- Added usermode +r (registered nick) and channelmode +r (registered channel) |
634 |
- Added usermode +R (only registered clients may send a private message) |
635 |
- Added channelmode +R (only registered clients may join that channel) |
636 |
- Various services shortcuts have been added (/NS, /CS, /NICKSERV, /CHANSERV, etc.) |
637 |
- Added services {} block to ircd.conf |
638 |
- Added services_name directive to general {} block |
639 |
- Added GLOBOPS mainly for services compatibility, but can be used by operators, too |
640 |
o) Removed RKLINE and RXLINE commands. Regular expression based bans should |
641 |
only be added via ircd.conf |
642 |
o) Added 'globops', 'restart', 'dline', 'undline' and 'module' operator |
643 |
privilege flags. Read doc/reference.conf for further explanation of what |
644 |
these flags control |
645 |
o) Removed Idle-time klines |
646 |
o) Cleaned up modules API. Old modules won't work anymore |
647 |
o) Removed 'general::burst_away' configuration directive. AWAY bursts are now |
648 |
controlled via 'connect::flags' explicitly |
649 |
o) Introduced new logging subsystem including log rotation based on |
650 |
file sizes. Log timestamp format is ISO8601 now |
651 |
o) Added support for remote D-lines |
652 |
o) Added usermode +H which is basically a replacement for the hidden_admin and |
653 |
hidden_oper operator flags. With usermode +H, irc operator status can now |
654 |
be hidden even on remote servers |
655 |
o) Added CIDR support for operator {} blocks |
656 |
o) Removed the servlink program. ircd-hybrid can now make use of |
657 |
SSL/TLS for inter-server communication. |
658 |
NOTE: compressed server links are of course still available, but a SSL/TLS |
659 |
connection is required, as compression is now handled via OpenSSL |
660 |
o) Removed 'ssl_server_protocol' configuration directive and |
661 |
added 'ssl_client_method' and 'ssl_server_method' instead. |
662 |
Both of these options can now be changed at runtime |
663 |
o) Oper login IDs are no longer limited to NICKLEN*2 |
664 |
o) Removed 'channel::burst_topicwho' configuration option. This feature is now |
665 |
enabled by default |
666 |
o) "STATS Y|y" now reports CIDR limits as well |
667 |
o) Added m_webirc.c to contrib/ |
668 |
o) Overall code cleanup and speed improvements |
669 |
|
670 |
-------------------------------------------------------------------------------- |
671 |
|
672 |
BUG REPORTS: If you run this code and encounter problems, you must report |
673 |
the bug by EMAIL to bugs@ircd-hybrid.org |
674 |
Please include a gdb backtrace and a copy of your config.h and |
675 |
ircd.conf with any report (with passwords and other sensitive |
676 |
information masked). |
677 |
|
678 |
DISCUSSION: There is a mailing list for discussion of hybrid issues, |
679 |
including betas. To subscribe, use this link: |
680 |
https://lists.ircd-hybrid.org/mailman/listinfo/hybrid |
681 |
This is the proper place to discuss new features, bugs, etc. |
682 |
|
683 |
Questions/comments directed to bugs@ircd-hybrid.org |
684 |
|
685 |
Other files recommended for reading: README, INSTALL |
686 |
|
687 |
-------------------------------------------------------------------------------- |
688 |
$Id$ |