ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/install-sh

Comparing:
ircd-hybrid-7.2/install-sh (file contents), Revision 945 by michael, Mon Jul 20 15:48:27 2009 UTC vs.
ircd-hybrid/trunk/install-sh (file contents), Revision 8315 by michael, Wed Feb 28 17:48:10 2018 UTC

#	Line 1 | Line 1
1		#!/bin/sh
2		# install - install a program, script, or datafile
3
4	<	scriptversion=2009-04-28.21; # UTC
4	>	scriptversion=2016-01-11.22; # UTC
5
6		# This originates from X11R5 (mit/util/scripts/install.sh), which was
7		# later released in X11R6 (xc/config/util/install.sh) with the
#	Line 35 | Line 35 | scriptversion=2009-04-28.21; # UTC
35		# FSF changes to this file are in the public domain.
36		#
37		# Calling this script install-sh is preferred over install.sh, to prevent
38	<	# `make' implicit rules from creating a file called install from it
38	>	# 'make' implicit rules from creating a file called install from it
39		# when there is no Makefile.
40		#
41		# This script is compatible with the BSD install script, but was written
42		# from scratch.
43
44	+	tab='   '
45		nl='
46		'
47	<	IFS=" ""        $nl"
47	>	IFS=" $tab$nl"
48
49	<	# set DOITPROG to echo to test this script
49	>	# Set DOITPROG to "echo" to test this script.
50
50	–	# Don't use :- since 4.3BSD and earlier shells don't like it.
51		doit=${DOITPROG-}
52	<	if test -z "$doit"; then
53	<	doit_exec=exec
54	<	else
55	<	doit_exec=$doit
56	<	fi
52	>	doit_exec=${doit:-exec}
53
54		# Put in absolute file names if you don't have them in your path;
55		# or use environment vars.
#	Line 68 | Line 64 | mvprog=${MVPROG-mv}
64		rmprog=${RMPROG-rm}
65		stripprog=${STRIPPROG-strip}
66
71	–	posix_glob='?'
72	–	initialize_posix_glob='
73	–	test "$posix_glob" != "?" || {
74	–	if (set -f) 2>/dev/null; then
75	–	posix_glob=
76	–	else
77	–	posix_glob=:
78	–	fi
79	–	}
80	–	'
81	–
67		posix_mkdir=
68
69		# Desired mode of installed file.
#	Line 97 | Line 82 | dir_arg=
82		dst_arg=
83
84		copy_on_change=false
85	<	no_target_directory=
85	>	is_target_a_directory=possibly
86
87		usage="\
88		Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
#	Line 137 | Line 122 | while test $# -ne 0; do
122		-d) dir_arg=true;;
123
124		-g) chgrpcmd="$chgrpprog $2"
125	<	shift;;
125	>	shift;;
126
127		--help) echo "$usage"; exit $?;;
128
129		-m) mode=$2
130	<	case $mode in
131	<	*' '* | *'    '* | *'
132	<	'*        | *'*'* | *'?'* | *'['*)
133	<	echo "$0: invalid mode: $mode" >&2
134	<	exit 1;;
135	<	esac
151	<	shift;;
130	>	case $mode in
131	>	*' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
132	>	echo "$0: invalid mode: $mode" >&2
133	>	exit 1;;
134	>	esac
135	>	shift;;
136
137		-o) chowncmd="$chownprog $2"
138	<	shift;;
138	>	shift;;
139
140		-s) stripcmd=$stripprog;;
141
142	<	-t) dst_arg=$2
143	<	shift;;
142	>	-t)
143	>	is_target_a_directory=always
144	>	dst_arg=$2
145	>	# Protect names problematic for 'test' and other utilities.
146	>	case $dst_arg in
147	>	-* | [=\(\)!]) dst_arg=./$dst_arg;;
148	>	esac
149	>	shift;;
150
151	<	-T) no_target_directory=true;;
151	>	-T) is_target_a_directory=never;;
152
153		--version) echo "$0 $scriptversion"; exit $?;;
154
155	<	--) shift
156	<	break;;
155	>	--) shift
156	>	break;;
157
158	<	-*) echo "$0: invalid option: $1" >&2
159	<	exit 1;;
158	>	-*) echo "$0: invalid option: $1" >&2
159	>	exit 1;;
160
161		*)  break;;
162		esac
163		shift
164		done
165
166	+	# We allow the use of options -d and -T together, by making -d
167	+	# take the precedence; this is for compatibility with GNU install.
168	+
169	+	if test -n "$dir_arg"; then
170	+	if test -n "$dst_arg"; then
171	+	echo "$0: target directory not allowed when installing a directory." >&2
172	+	exit 1
173	+	fi
174	+	fi
175	+
176		if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
177		# When -d is used, all remaining arguments are directories to create.
178		# When -t is used, the destination is already specified.
#	Line 186 | Line 186 | if test $# -ne 0 && test -z "$dir_arg$ds
186		fi
187		shift # arg
188		dst_arg=$arg
189	+	# Protect names problematic for 'test' and other utilities.
190	+	case $dst_arg in
191	+	-* | [=\(\)!]) dst_arg=./$dst_arg;;
192	+	esac
193		done
194		fi
195
#	Line 194 | Line 198 | if test $# -eq 0; then
198		echo "$0: no input file specified." >&2
199		exit 1
200		fi
201	<	# It's OK to call `install-sh -d' without argument.
201	>	# It's OK to call 'install-sh -d' without argument.
202		# This can happen when creating conditional directories.
203		exit 0
204		fi
205
206		if test -z "$dir_arg"; then
207	<	trap '(exit $?); exit' 1 2 13 15
207	>	if test $# -gt 1 || test "$is_target_a_directory" = always; then
208	>	if test ! -d "$dst_arg"; then
209	>	echo "$0: $dst_arg: Is not a directory." >&2
210	>	exit 1
211	>	fi
212	>	fi
213	>	fi
214	>
215	>	if test -z "$dir_arg"; then
216	>	do_exit='(exit $ret); exit $ret'
217	>	trap "ret=129; $do_exit" 1
218	>	trap "ret=130; $do_exit" 2
219	>	trap "ret=141; $do_exit" 13
220	>	trap "ret=143; $do_exit" 15
221
222		# Set umask so as not to create temps with too-generous modes.
223		# However, 'strip' requires both read and write access to temps.
#	Line 211 | Line 228 | if test -z "$dir_arg"; then
228
229		*[0-7])
230		if test -z "$stripcmd"; then
231	<	u_plus_rw=
231	>	u_plus_rw=
232		else
233	<	u_plus_rw='% 200'
233	>	u_plus_rw='% 200'
234		fi
235		cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
236		*)
237		if test -z "$stripcmd"; then
238	<	u_plus_rw=
238	>	u_plus_rw=
239		else
240	<	u_plus_rw=,u+rw
240	>	u_plus_rw=,u+rw
241		fi
242		cp_umask=$mode$u_plus_rw;;
243		esac
#	Line 228 | Line 245 | fi
245
246		for src
247		do
248	<	# Protect names starting with `-'.
248	>	# Protect names problematic for 'test' and other utilities.
249		case $src in
250	<	-*) src=./$src;;
250	>	-* | [=\(\)!]) src=./$src;;
251		esac
252
253		if test -n "$dir_arg"; then
#	Line 252 | Line 269 | do
269		echo "$0: no destination specified." >&2
270		exit 1
271		fi
255	–
272		dst=$dst_arg
257	–	# Protect names starting with `-'.
258	–	case $dst in
259	–	-*) dst=./$dst;;
260	–	esac
273
274		# If destination is a directory, append the input filename; won't work
275		# if double slashes aren't ignored.
276		if test -d "$dst"; then
277	<	if test -n "$no_target_directory"; then
278	<	echo "$0: $dst_arg: Is a directory" >&2
279	<	exit 1
277	>	if test "$is_target_a_directory" = never; then
278	>	echo "$0: $dst_arg: Is a directory" >&2
279	>	exit 1
280		fi
281		dstdir=$dst
282		dst=$dstdir/`basename "$src"`
283		dstdir_status=0
284		else
285	<	# Prefer dirname, but fall back on a substitute if dirname fails.
274	<	dstdir=`
275	<	(dirname "$dst") 2>/dev/null ||
276	<	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
277	<	X"$dst" : 'X\(//\)[^/]' \| \
278	<	X"$dst" : 'X\(//\)$' \| \
279	<	X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
280	<	echo X"$dst" |
281	<	sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
282	<	s//\1/
283	<	q
284	<	}
285	<	/^X\(\/\/\)[^/].*/{
286	<	s//\1/
287	<	q
288	<	}
289	<	/^X\(\/\/\)$/{
290	<	s//\1/
291	<	q
292	<	}
293	<	/^X\(\/\).*/{
294	<	s//\1/
295	<	q
296	<	}
297	<	s/.*/./; q'
298	<	`
299	<
285	>	dstdir=`dirname "$dst"`
286		test -d "$dstdir"
287		dstdir_status=$?
288		fi
#	Line 307 | Line 293 | do
293		if test $dstdir_status != 0; then
294		case $posix_mkdir in
295		'')
296	<	# Create intermediate dirs using mode 755 as modified by the umask.
297	<	# This is like FreeBSD 'install' as of 1997-10-28.
298	<	umask=`umask`
299	<	case $stripcmd.$umask in
300	<	# Optimize common cases.
301	<	*[2367][2367]) mkdir_umask=$umask;;
302	<	.*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
303	<
304	<	*[0-7])
305	<	mkdir_umask=`expr $umask + 22 \
306	<	- $umask % 100 % 40 + $umask % 20 \
307	<	- $umask % 10 % 4 + $umask % 2
308	<	`;;
309	<	*) mkdir_umask=$umask,go-w;;
310	<	esac
311	<
312	<	# With -d, create the new directory with the user-specified mode.
313	<	# Otherwise, rely on $mkdir_umask.
314	<	if test -n "$dir_arg"; then
315	<	mkdir_mode=-m$mode
316	<	else
317	<	mkdir_mode=
318	<	fi
319	<
320	<	posix_mkdir=false
321	<	case $umask in
322	<	*[123567][0-7][0-7])
323	<	# POSIX mkdir -p sets u+wx bits regardless of umask, which
324	<	# is incompatible with FreeBSD 'install' when (umask & 300) != 0.
325	<	;;
326	<	*)
327	<	tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
328	<	trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
329	<
330	<	if (umask $mkdir_umask &&
331	<	exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
332	<	then
333	<	if test -z "$dir_arg" || {
334	<	# Check for POSIX incompatibilities with -m.
335	<	# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
336	<	# other-writeable bit of parent directory when it shouldn't.
337	<	# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
338	<	ls_ld_tmpdir=`ls -ld "$tmpdir"`
339	<	case $ls_ld_tmpdir in
340	<	d????-?r-*) different_mode=700;;
341	<	d????-?--*) different_mode=755;;
342	<	*) false;;
343	<	esac &&
344	<	$mkdirprog -m$different_mode -p -- "$tmpdir" && {
345	<	ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
346	<	test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
347	<	}
348	<	}
349	<	then posix_mkdir=:
350	<	fi
351	<	rmdir "$tmpdir/d" "$tmpdir"
352	<	else
353	<	# Remove any dirs left behind by ancient mkdir implementations.
354	<	rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
355	<	fi
356	<	trap '' 0;;
357	<	esac;;
296	>	# Create intermediate dirs using mode 755 as modified by the umask.
297	>	# This is like FreeBSD 'install' as of 1997-10-28.
298	>	umask=`umask`
299	>	case $stripcmd.$umask in
300	>	# Optimize common cases.
301	>	*[2367][2367]) mkdir_umask=$umask;;
302	>	.*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
303	>
304	>	*[0-7])
305	>	mkdir_umask=`expr $umask + 22 \
306	>	- $umask % 100 % 40 + $umask % 20 \
307	>	- $umask % 10 % 4 + $umask % 2
308	>	`;;
309	>	*) mkdir_umask=$umask,go-w;;
310	>	esac
311	>
312	>	# With -d, create the new directory with the user-specified mode.
313	>	# Otherwise, rely on $mkdir_umask.
314	>	if test -n "$dir_arg"; then
315	>	mkdir_mode=-m$mode
316	>	else
317	>	mkdir_mode=
318	>	fi
319	>
320	>	posix_mkdir=false
321	>	case $umask in
322	>	*[123567][0-7][0-7])
323	>	# POSIX mkdir -p sets u+wx bits regardless of umask, which
324	>	# is incompatible with FreeBSD 'install' when (umask & 300) != 0.
325	>	;;
326	>	*)
327	>	tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
328	>	trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
329	>
330	>	if (umask $mkdir_umask &&
331	>	exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
332	>	then
333	>	if test -z "$dir_arg" || {
334	>	# Check for POSIX incompatibilities with -m.
335	>	# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
336	>	# other-writable bit of parent directory when it shouldn't.
337	>	# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
338	>	ls_ld_tmpdir=`ls -ld "$tmpdir"`
339	>	case $ls_ld_tmpdir in
340	>	d????-?r-*) different_mode=700;;
341	>	d????-?--*) different_mode=755;;
342	>	*) false;;
343	>	esac &&
344	>	$mkdirprog -m$different_mode -p -- "$tmpdir" && {
345	>	ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
346	>	test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
347	>	}
348	>	}
349	>	then posix_mkdir=:
350	>	fi
351	>	rmdir "$tmpdir/d" "$tmpdir"
352	>	else
353	>	# Remove any dirs left behind by ancient mkdir implementations.
354	>	rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
355	>	fi
356	>	trap '' 0;;
357	>	esac;;
358		esac
359
360		if
361		$posix_mkdir && (
362	<	umask $mkdir_umask &&
363	<	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
362	>	umask $mkdir_umask &&
363	>	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
364		)
365		then :
366		else
#	Line 384 | Line 370 | do
370		# directory the slow way, step by step, checking for races as we go.
371
372		case $dstdir in
373	<	/*) prefix='/';;
374	<	-*) prefix='./';;
375	<	*)  prefix='';;
373	>	/*) prefix='/';;
374	>	[-=\(\)!]*) prefix='./';;
375	>	*)  prefix='';;
376		esac
377
392	–	eval "$initialize_posix_glob"
393	–
378		oIFS=$IFS
379		IFS=/
380	<	$posix_glob set -f
380	>	set -f
381		set fnord $dstdir
382		shift
383	<	$posix_glob set +f
383	>	set +f
384		IFS=$oIFS
385
386		prefixes=
387
388		for d
389		do
390	<	test -z "$d" && continue
390	>	test X"$d" = X && continue
391
392	<	prefix=$prefix$d
393	<	if test -d "$prefix"; then
394	<	prefixes=
395	<	else
396	<	if $posix_mkdir; then
397	<	(umask=$mkdir_umask &&
398	<	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
399	<	# Don't fail if two instances are running concurrently.
400	<	test -d "$prefix" || exit 1
401	<	else
402	<	case $prefix in
403	<	*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
404	<	*) qprefix=$prefix;;
405	<	esac
406	<	prefixes="$prefixes '$qprefix'"
407	<	fi
408	<	fi
409	<	prefix=$prefix/
392	>	prefix=$prefix$d
393	>	if test -d "$prefix"; then
394	>	prefixes=
395	>	else
396	>	if $posix_mkdir; then
397	>	(umask=$mkdir_umask &&
398	>	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
399	>	# Don't fail if two instances are running concurrently.
400	>	test -d "$prefix" || exit 1
401	>	else
402	>	case $prefix in
403	>	*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
404	>	*) qprefix=$prefix;;
405	>	esac
406	>	prefixes="$prefixes '$qprefix'"
407	>	fi
408	>	fi
409	>	prefix=$prefix/
410		done
411
412		if test -n "$prefixes"; then
413	<	# Don't fail if two instances are running concurrently.
414	<	(umask $mkdir_umask &&
415	<	eval "\$doit_exec \$mkdirprog $prefixes") ||
416	<	test -d "$dstdir" || exit 1
417	<	obsolete_mkdir_used=true
413	>	# Don't fail if two instances are running concurrently.
414	>	(umask $mkdir_umask &&
415	>	eval "\$doit_exec \$mkdirprog $prefixes") ||
416	>	test -d "$dstdir" || exit 1
417	>	obsolete_mkdir_used=true
418		fi
419		fi
420		fi
#	Line 465 | Line 449 | do
449
450		# If -C, don't bother to copy if it wouldn't change the file.
451		if $copy_on_change &&
452	<	old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
453	<	new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
454	<
471	<	eval "$initialize_posix_glob" &&
472	<	$posix_glob set -f &&
452	>	old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
453	>	new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
454	>	set -f &&
455		set X $old && old=:$2:$4:$5:$6 &&
456		set X $new && new=:$2:$4:$5:$6 &&
457	<	$posix_glob set +f &&
476	<
457	>	set +f &&
458		test "$old" = "$new" &&
459		$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
460		then
#	Line 486 | Line 467 | do
467		# to itself, or perhaps because mv is so ancient that it does not
468		# support -f.
469		{
470	<	# Now remove or move aside any old file at destination location.
471	<	# We try this two ways since rm can't unlink itself on some
472	<	# systems and the destination file might be busy for other
473	<	# reasons.  In this case, the final cleanup might fail but the new
474	<	# file should still install successfully.
475	<	{
476	<	test ! -f "$dst" ||
477	<	$doit $rmcmd -f "$dst" 2>/dev/null ||
478	<	{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
479	<	{ $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
480	<	} ||
481	<	{ echo "$0: cannot unlink or rename $dst" >&2
482	<	(exit 1); exit 1
483	<	}
484	<	} &&
470	>	# Now remove or move aside any old file at destination location.
471	>	# We try this two ways since rm can't unlink itself on some
472	>	# systems and the destination file might be busy for other
473	>	# reasons.  In this case, the final cleanup might fail but the new
474	>	# file should still install successfully.
475	>	{
476	>	test ! -f "$dst" ||
477	>	$doit $rmcmd -f "$dst" 2>/dev/null ||
478	>	{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
479	>	{ $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
480	>	} ||
481	>	{ echo "$0: cannot unlink or rename $dst" >&2
482	>	(exit 1); exit 1
483	>	}
484	>	} &&
485
486	<	# Now rename the file to the real destination.
487	<	$doit $mvcmd "$dsttmp" "$dst"
486	>	# Now rename the file to the real destination.
487	>	$doit $mvcmd "$dsttmp" "$dst"
488		}
489		fi || exit 1
490
#	Line 515 | Line 496 | done
496		# eval: (add-hook 'write-file-hooks 'time-stamp)
497		# time-stamp-start: "scriptversion="
498		# time-stamp-format: "%:y-%02m-%02d.%02H"
499	<	# time-stamp-time-zone: "UTC"
499	>	# time-stamp-time-zone: "UTC0"
500		# time-stamp-end: "; # UTC"
501		# End:

Comparing:
ircd-hybrid-7.2/install-sh (property svn:eol-style), Revision 945 by michael, Mon Jul 20 15:48:27 2009 UTC vs.
ircd-hybrid/trunk/install-sh (property svn:eol-style), Revision 8315 by michael, Wed Feb 28 17:48:10 2018 UTC

#	Line 0 | Line 1
1	+	native

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)