ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/doc/reference.conf

Comparing ircd-hybrid/trunk/doc/reference.conf (file contents):
Revision 3059 by michael, Thu Feb 27 17:06:58 2014 UTC vs.
Revision 6609 by michael, Thu Oct 22 18:44:58 2015 UTC

#	Line 1 | Line 1
1		/*
2		* This is an example configuration file for ircd-hybrid
3		*
4	<	* Copyright (c) 2000-2014 ircd-hybrid development team
4	>	* Copyright (c) 2000-2015 ircd-hybrid development team
5		*
6		* $Id$
7		*/
#	Line 10 | Line 10
10		* ########################################################################
11		* IMPORTANT NOTE:
12		*
13	<	* auth {} blocks MUST be specified in order of precedence.  The first one
14	<	* that matches a user will be used.  So place spoofs first, then specials,
13	>	* auth {} blocks MUST be specified in order of precedence. The first one
14	>	* that matches a user will be used. So place spoofs first, then specials,
15		* then general access.
16		* ########################################################################
17		*
#	Line 41 | Line 41 | serverinfo {
41		/*
42		* name: the name of this server. This cannot be changed at runtime.
43		*/
44	<	name = "hades.arpa";
44	>	name = "server.example.net";
45
46		/*
47		* sid: a server's unique ID. This is three characters long and must
#	Line 49 | Line 49 | serverinfo {
49		* a digit, followed by 2 alpha-numerical letters.
50		*
51		* NOTE: The letters must be capitalized. This cannot be changed at runtime.
52	+	*
53	+	* A sid is automatically generated at runtime, if you want to configure
54	+	* a specific sid, uncomment the following line.
55		*/
56	<	sid = "0HY";
56	>	#       sid = "0HY";
57
58		/*
59		* description: the description of the server.
#	Line 58 | Line 61 | serverinfo {
61		description = "ircd-hybrid test server";
62
63		/*
64	<	* network info: the name and description of the network this server
65	<	* is on. Shown in the 005 reply and used with serverhiding.
64	>	* network_name, network_desc: the name and description of the network this
65	>	* server is on. Shown in the 005 reply and used with serverhiding.
66		*/
67		network_name = "MyNet";
68		network_desc = "This is My Network";
#	Line 71 | Line 74 | serverinfo {
74		hub = no;
75
76		/*
77	<	* vhost: the IP to bind to when we connect outward to ipv4 servers.
78	<	* This should be an ipv4 IP only, or "*" for INADDR_ANY.
77	>	* vhost: the IP address to bind to when we connect outward to IPv4 servers.
78	>	* This should be an IPv4 address, or "*" for INADDR_ANY.
79		*/
80	<	#       vhost = "192.169.0.1";
80	>	#       vhost = "192.0.2.1";
81
82		/*
83	<	* vhost6: the address to bind to when we make outgoing connections
84	<	* to IPv6 servers. This should be an IPv6 address, or "*" for INADDR_ANY.
83	>	* vhost6: the IP address to bind to when we connect outward to IPv6 servers.
84	>	* This should be an IPv6 address, or "*" for in6addr_any.
85		*/
86	<	#       vhost6 = "3ffe:80e8:546::2";
86	>	#       vhost6 = "2001:DB8::1";
87
88	<	/* max_clients: the maximum number of clients allowed to connect. */
89	<	max_clients = 512;
88	>	/*
89	>	* default_max_clients: the default maximum number of clients allowed
90	>	* to connect. This can be changed from within IRC via /QUOTE SET MAX.
91	>	*/
92	>	default_max_clients = 512;
93
94		/*
95		* max_nick_length: only applies to local clients. Must be in the
#	Line 108 | Line 114 | serverinfo {
114		*      chown <ircd-user>.<ircd.group> rsa.key
115		*      chmod 0600 rsa.key
116		*/
117	<	#       rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
117	>	#       rsa_private_key_file = "etc/rsa.key";
118
119		/*
120		* ssl_certificate_file: the path to the file containing our
#	Line 121 | Line 127 | serverinfo {
127		*
128		*      openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
129		*
124	–	* See http://www.openssl.org/docs/HOWTO/certificates.txt
125	–	*
130		* Please use the following values when generating the cert
131		*
132		*      Organization Name: Network Name
133	<	*      Organization Unit Name: changme.someirc.net
134	<	*      Common Name: irc.someirc.net
135	<	*      E-mail: you@domain.com
133	>	*      Organization Unit Name: unit.example.net
134	>	*      Common Name: irc.example.net
135	>	*      E-mail: email@example.net
136		*/
137	<	#       ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
137	>	#       ssl_certificate_file = "etc/cert.pem";
138
139		/*
140	<	* ssl_dh_param_file:
141	<	*
142	<	* Path to the PEM encoded Diffie-Hellman parameter file.
139	<	* DH parameters are required when using ciphers with EDH
140	<	* (ephemeral Diffie-Hellman) key exchange.
140	>	* ssl_dh_param_file: path to the PEM encoded Diffie-Hellman
141	>	* parameter file. DH parameters are required when using
142	>	* ciphers with EDH (ephemeral Diffie-Hellman) key exchange.
143		*
144		* A DH parameter file can be created by running:
145		*
#	Line 147 | Line 149 | serverinfo {
149		* regarding specific OpenSSL dhparam command-line options
150		* can be found in the OpenSSL manual.
151		*/
152	<	#       ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
152	>	#       ssl_dh_param_file = "etc/dhparam.pem";
153
154		/*
155	<	* ssl_cipher_list:
155	>	* ssl_dh_elliptic_curve: defines the curve to use for the
156	>	* Elliptic Curve Diffie-Hellman (ECDH) algorithm.
157	>	* Default is ANSI X9.62 prime256v1/secp256r1 if nothing else is specified.
158		*
159	<	* List of ciphers to support on _this_ server. Can be used to
160	<	* enforce specific ciphers for incoming SSL/TLS connections.
161	<	* If a client (which also includes incoming server connections) is not
162	<	* capable of using any of the ciphers listed here, the connection will
159	>	* A list of supported curves by OpenSSL can be obtained by running:
160	>	*
161	>	*      openssl ecparam -list_curves
162	>	*/
163	>	#       ssl_dh_elliptic_curve = "secp521r1";
164	>
165	>	/*
166	>	* ssl_cipher_list: list of ciphers to support on _this_ server.
167	>	* Can be used to enforce specific ciphers for incoming SSL/TLS
168	>	* connections. If a client (which also includes incoming server connections)
169	>	* is not capable of using any of the ciphers listed here, the connection will
170		* simply be rejected.
171		*
172		* A list of supported ciphers by OpenSSL can be obtained by running:
173		*
174	<	*      openssl ciphers -ssl3 -tls1 -v
174	>	*      openssl ciphers -tls1 -v
175		*
176		* Multiple ciphers are separated by colons. The order of preference is
177		* from left to right.
#	Line 168 | Line 179 | serverinfo {
179		#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
180
181		/*
182	<	* ssl_server_method:
183	<	* ssl_client_method:
182	>	* ssl_message_digest_algorithm: defines what cryptographic hash function
183	>	* to use for generating fingerprint hashes of X.509 certificates.
184	>	* Default is SHA-256 if nothing else is specified.
185		*
186	<	* SSL/TLS methods we provide for incoming (server method) and
187	<	* outgoing (client method) SSL/TLS connections.
188	<	* This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
186	>	* A list of supported message digest algorithms by OpenSSL can be obtained by running:
187	>	*
188	>	*      openssl list-message-digest-algorithms
189		*/
190	<	#       ssl_server_method = tlsv1, sslv3;
179	<	#       ssl_client_method = tlsv1;
190	>	#       ssl_message_digest_algorithm = "sha256";
191		};
192
193		/*
194	<	* admin {}:  contains admin information about the server
194	>	* admin {}:  contains administrative information about the server
195		*/
196		admin {
197		name = "Smurf target";
198		description = "Main Server Administrator";
199	<	email = "<syn@packets.r.us>";
199	>	email = "<admin@server.example.net>";
200		};
201
202		/*
#	Line 203 | Line 214 | class {
214
215		/*
216		* number_per_ip: how many local users are allowed to connect
217	<	* from a single IP address  (optional)
217	>	* from a single IP address (optional)
218		*/
219		number_per_ip = 2;
220
221		/*
222		* max_local: how many local users are allowed to connect
223	<	* from a single ident@host  (optional)
223	>	* from a single ident@host (optional)
224		*/
225		max_local = 2;
226
227		/*
228	<	* max_global: network-wide limit of users per ident@host  (optional)
228	>	* max_global: network-wide limit of users per ident@host (optional)
229		*/
230		max_global = 10;
231
#	Line 224 | Line 235 | class {
235		max_number = 100;
236
237		/*
238	<	* the following lines are optional and allow you to define
238	>	* The following lines are optional and allow you to define
239		* how many users can connect from one /NN subnet.
240		*/
241		cidr_bitlen_ipv4 = 24;
#	Line 239 | Line 250 | class {
250
251		/*
252		* recvq: the amount of data allowed in a client's receive queue before
253	<	* they are dropped for flooding. Defaults to 2560 if the chosen
254	<	* value isn't within the range of 512 to 8000.
253	>	* they are dropped for flooding. Defaults to 2560 if the chosen value
254	>	* isn't within the range of 512 to 8000.
255		*/
256		recvq = 2560 bytes;
257		};
#	Line 253 | Line 264 | class {
264		sendq = 100 kbytes;
265
266		/*
267	+	* max_channels: maximum number of channels users in this class can join.
268	+	*/
269	+	max_channels = 60;
270	+
271	+	/*
272		* min_idle: minimum idle time that is shown in /whois.
273		*/
274		min_idle = 3 hours;
#	Line 305 | Line 321 | motd {
321		/*
322		* file: path to the actual motd file.
323		*/
324	<	file = "/usr/local/ircd/etc/german.motd";
324	>	file = "etc/german.motd";
325		};
326
327		/*
#	Line 313 | Line 329 | motd {
329		*/
330		listen {
331		/*
332	<	* port: the port to listen on. If no host is specified
333	<	* earlier in the listen {} block, it will listen on all available IPs.
332	>	* port: the port to listen on. If no host is specified earlier in the
333	>	* listen {} block, it will listen on all available IP addresses.
334		*
335		* Ports are separated by commas; a range may be specified using ".."
336		*/
337
338	<	/* port: listen on all available IP addresses, ports 6665 to 6669 */
338	>	/* port: listen on all available IP addresses, ports 6665 to 6669. */
339		port = 6665 .. 6669;
340
341		/*
342	<	* Listen on 192.168.0.1/6697 with SSL enabled and hidden from STATS P
342	>	* Listen on 192.0.2.1/6697 with SSL enabled and hidden from STATS P
343		* unless you are an administrator.
344		*
345		* NOTE: The "flags" directive always has to come before "port".
#	Line 335 | Line 351 | listen {
351		*  hidden - Port is hidden from /stats P, unless you're an admin
352		*/
353		flags = hidden, ssl;
354	<	host = "192.168.0.1";
354	>	host = "192.0.2.2";
355		port = 6697;
356
357		/*
358	<	* host: set a specific IP address/host to listen on using the
358	>	* host: set a specific IP address to listen on using the
359		* subsequent port definitions. This may be IPv4 or IPv6.
360		*/
361	<	host = "1.2.3.4";
361	>	host = "192.0.2.3";
362		port = 7000, 7001;
363
364	<	host = "3ffe:1234:a:b:c::d";
364	>	host = "2001:DB8::2";
365		port = 7002;
366		};
367
#	Line 355 | Line 371 | listen {
371		auth {
372		/*
373		* user: the user@host allowed to connect. Multiple user
374	<	* lines are permitted within each auth block.
374	>	* lines are permitted within each auth {} block.
375		*/
376	<	user = "*@172.16.0.0/12";
377	<	user = "*test@123D:B567:*";
376	>	user = "*@192.0.2.0/24";
377	>	user = "*test@2001:DB8:*";
378
379	<	/* password: an optional password that is required to use this block */
379	>	/* password: an optional password that is required to use this block. */
380		password = "letmein";
381
382		/*
383		* encrypted: controls whether the auth password above has been
384	<	* encrypted.
384	>	* encrypted. Default is 'no' if nothing else is specified.
385		*/
386		encrypted = yes;
387
#	Line 375 | Line 391 | auth {
391		*/
392		spoof = "I.still.hate.packets";
393
394	<	/* class: the class the user is placed in */
394	>	/* class: the class the user is placed in. */
395		class = "opers";
396
397		/*
398	<	* need_password - don't allow users who haven't supplied the correct
399	<	*                 password to connect using another auth{} block
400	<	*                 ('&' prefix on /stats I if disabled)
385	<	* need_ident    - require the user to have identd to connect ('+' prefix on /stats I)
398	>	* need_password - don't allow users who haven't supplied the correct  | ('&' prefix on /stats I if disabled)
399	>	*                 password to connect using another auth {} block
400	>	* need_ident    - require the user to have identd to connect          | ('+' prefix on /stats I)
401		* spoof_notice  - enable spoofing notification to admins
402	<	* exceed_limit  - allow a user to exceed class limits ('>' prefix on /stats I)
403	<	* kline_exempt  - exempt this user from k/glines ('^' prefix on /stats I)
404	<	* gline_exempt  - exempt this user from glines ('_' prefix on /stats I)
405	<	* resv_exempt   - exempt this user from resvs ('$' prefix on /stats I)
406	<	* no_tilde      - remove ~ from a user with no ident ('-' prefix on /stats I)
407	<	* can_flood     - allow this user to exceed flood limits ('|' prefix on /stats I)
408	<	* webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
409	<	*                 ('<' prefix on /stats I)
402	>	* exceed_limit  - allow a user to exceed class limits                 | ('>' prefix on /stats I)
403	>	* kline_exempt  - exempt this user from k-lines                       | ('^' prefix on /stats I)
404	>	* xline_exempt  - exempt this user from x-lines                       | ('!' prefix on /stats I)
405	>	* resv_exempt   - exempt this user from resvs                         | ('$' prefix on /stats I)
406	>	* no_tilde      - remove ~ from a user with no ident                  | ('-' prefix on /stats I)
407	>	* can_flood     - allow this user to exceed flood limits              | ('|' prefix on /stats I)
408	>	* webirc        - enables WEBIRC authentication for web-based         | ('<' prefix on /stats I)
409	>	*                 clients such as Mibbit
410		*/
411		flags = need_password, spoof_notice, exceed_limit, kline_exempt,
412	<	gline_exempt, resv_exempt, no_tilde, can_flood;
412	>	xline_exempt, resv_exempt, no_tilde, can_flood;
413		};
414
415		auth {
416		/*
417	<	* redirect: the server and port to redirect a user to. A user does not
418	<	* have to obey the redirection; the ircd just suggests an alternative
419	<	* server for them.
417	>	* redirserv, redirport: the server and port to redirect a user to.
418	>	* A user does not have to obey the redirection; the ircd just
419	>	* suggests an alternative server for them.
420		*/
421	<	redirserv = "this.is.not.a.real.server";
421	>	redirserv = "server2.example.net";
422		redirport = 6667;
423
424	<	user = "*.server";
424	>	user = "*@*.ch";
425
426	<	/* class: a class is required even though it is not used */
426	>	/* class: a class is required even though it is not used. */
427		class = "users";
428		};
429
#	Line 422 | Line 437 | auth {
437		* operator {}:  defines ircd operators
438		*/
439		operator {
440	<	/* name: the name of the oper */
440	>	/* name: the name of the operator */
441		name = "sheep";
442
443		/*
444	<	* user: the user@host required for this operator. Multiple
445	<	* user lines are supported.
444	>	* user: the user@host required for this operator. Multiple user
445	>	* lines are permitted within each operator {} block.
446		*/
447	<	user = "*sheep@192.168.0.0/16";
448	<	user = "*@127.0.0.0/8";
447	>	user = "*sheep@192.0.2.0/26";
448	>	user = "*@192.0.2.240/28";
449
450		/*
451		* password: the password required to oper. By default this will
#	Line 444 | Line 459 | operator {
459
460		/*
461		* encrypted: controls whether the oper password above has been
462	<	* encrypted.
462	>	* encrypted. Default is 'yes' if nothing else is specified.
463		*/
464		encrypted = yes;
465
466		/*
467	<	* rsa_public_key_file: the public key for this oper when using Challenge.
468	<	* A password should not be defined when this is used; see
469	<	* doc/challenge.txt for more information.
467	>	* whois: allows to override the default RPL_WHOISOPERATOR numeric
468	>	* string shown in /whois.
469	>	* This string is propagated to all servers on the network.
470		*/
471	<	#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
471	>	#       whois = "is a Smurf Target (IRC Operator)";
472
473		/*
474		* ssl_certificate_fingerprint: enhances security by additionally checking
#	Line 469 | Line 484 | operator {
484
485		/*
486		* ssl_connection_required: client must be connected over SSL/TLS
487	<	* in order to be able to use this oper{} block.
487	>	* in order to be able to use this operator {} block.
488		* Default is 'no' if nothing else is specified.
489		*/
490		ssl_connection_required = no;
491
492	<	/* class: the class the oper joins when they successfully /oper */
492	>	/* class: the class the oper joins when they successfully /oper. */
493		class = "opers";
494
495		/*
496	<	* umodes: the default usermodes opers get when they /oper. If defined,
497	<	* it will override oper_umodes settings in general {}.
498	<	* Available usermodes:
496	>	* umodes: the default user modes opers get when they /oper.
497	>	* If defined, it will override oper_umodes settings in general {}.
498	>	* Available user modes:
499		*
500		* +b - bots         - See bot and drone flooding notices
501		* +c - cconn        - Client connection/quit notices
#	Line 488 | Line 503 | operator {
503		* +d - debug        - See debugging notices
504		* +e - external     - See remote server connection and split notices
505		* +F - farconnect   - Remote client connection/quit notices
506	<	* +f - full         - See auth{} block full notices
506	>	* +f - full         - See auth {} block full notices
507		* +G - softcallerid - Server Side Ignore for users not on your channels
508		* +g - callerid     - Server Side Ignore (for privmsgs etc)
509		* +H - hidden       - Hides operator status to other users
#	Line 497 | Line 512 | operator {
512		* +k - skill        - See server generated KILL messages
513		* +l - locops       - See LOCOPS messages
514		* +n - nchange      - See client nick changes
515	+	* +p - hidechans    - Hides channel list in WHOIS
516	+	* +q - hideidle     - Hides idle and signon time in WHOIS
517		* +R - nononreg     - Only receive private messages from registered clients
518		* +s - servnotice   - See general server notices
519		* +u - unauth       - See unauthorized client notices
520		* +w - wallop       - See server generated WALLOPS
521		* +y - spy          - See LINKS, STATS, TRACE notices etc.
505	–	* +z - operwall     - See oper generated WALLOPS
522		*/
523	<	umodes = locops, servnotice, operwall, wallop;
523	>	umodes = locops, servnotice, wallop;
524
525		/*
526	<	* privileges: controls the activities and commands an oper is
527	<	* allowed to do on the server. All options default to no.
528	<	* Available options:
526	>	* flags: controls the activities and commands an oper is
527	>	* allowed to do on the server. All flags default to 'no'.
528	>	* Available flags:
529		*
530	<	* module         - allows MODULE
530	>	* admin          - gives administrator privileges    | ('A' flag)
531	>	* close          - allows CLOSE
532		* connect        - allows local CONNECT              | ('P' flag)
533		* connect:remote - allows remote CONNECT             | ('Q' flag)
534	<	* squit          - allows local SQUIT                | ('R' flag)
535	<	* squit:remote   - allows remote SQUIT               | ('S' flag)
534	>	* die            - allows DIE                        | ('D' flag)
535	>	* dline          - allows DLINE                      |
536	>	* globops        - allows GLOBOPS                    |
537	>	* join:resv      - allows to JOIN resv {} channels
538		* kill           - allows to KILL local clients      | ('N' flag)
539		* kill:remote    - allows remote users to be /KILL'd | ('O' flag)
521	–	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
522	–	* dline          - allows DLINE                      |
523	–	* undline        - allows UNDLINE                    |
540		* kline          - allows KLINE                      | ('K' flag)
525	–	* unkline        - allows UNKLINE                    | ('U' flag)
526	–	* gline          - allows GLINE                      | ('G' flag)
527	–	* xline          - allows XLINE                      | ('X' flag)
528	–	* unxline        - allows UNXLINE                    |
541		* locops         - allows LOCOPS                     |
542	<	* globops        - allows GLOBOPS                    |
543	<	* wallops        - allows WALLOPS                    |
544	<	* operwall       - allows OPERWALL                   | ('L' flag)
542	>	* module         - allows MODULE                     |
543	>	* nick:resv      - allows to use NICK on resv {} nicks
544	>	* opme           - allows OPME                       |
545		* rehash         - allows oper to REHASH config      | ('H' flag)
546	<	* die            - allows DIE                        | ('D' flag)
546	>	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
547		* restart        - allows RESTART                    |
548	+	* resv           - allows RESV
549		* set            - allows SET                        |
550	<	* admin          - gives administrator privileges    | ('A' flag)
550	>	* squit          - allows local SQUIT                | ('R' flag)
551	>	* squit:remote   - allows remote SQUIT               | ('S' flag)
552	>	* undline        - allows UNDLINE                    |
553	>	* unkline        - allows UNKLINE                    | ('U' flag)
554	>	* unresv         - allows UNRESV
555	>	* unxline        - allows UNXLINE                    |
556	>	* wallops        - allows WALLOPS                    |
557	>	* xline          - allows XLINE                      | ('X' flag)
558		*/
559	<	flags = kill, kill:remote, connect, connect:remote, kline, unkline,
560	<	xline, globops, restart, die, rehash, admin, operwall, module;
541	<	};
542	<
543	<	/*
544	<	* service {}: specifies a server which may act as a network service
545	<	*
546	<	* NOTE: it is very important that every server on the network
547	<	*       has the same service{} block.
548	<	*/
549	<	service {
550	<	name = "service.someserver";
551	<	name = "stats.someserver";
559	>	flags = admin, connect, connect:remote, die, globops, kill, kill:remote,
560	>	kline, module, rehash, restart, set, unkline, unxline, xline;
561		};
562
563		/*
564		* connect {}: define a server to connect to
565		*/
566		connect {
567	<	/* name: the name of the server */
568	<	name = "irc.uplink.com";
567	>	/* name: the name of the server. */
568	>	name = "uplink.example.net";
569
570		/*
571		* host: the host or IP address to connect to. If a hostname is used it
572		* must match the reverse DNS of the server.
573		*/
574	<	host = "192.168.0.1";
574	>	host = "192.0.2.4";
575
576		/*
577		* vhost: the IP address to bind to when making outgoing connections to
#	Line 570 | Line 579 | connect {
579		* serverinfo::vhost and serverinfo::vhost6 will be overridden
580		* by this directive.
581		*/
582	<	vhost = "192.168.0.2";
582	>	vhost = "192.0.2.5";
583
584		/*
585	<	* passwords: the passwords to send (OLD C:) and accept (OLD N:).
585	>	* send_password, accept_password: the passwords to send and accept.
586		* The remote server will have these passwords swapped.
587		*/
588		send_password = "password";
#	Line 585 | Line 594 | connect {
594		*/
595		encrypted = no;
596
597	<	/* port: the port to connect to this server on */
597	>	/* port: the port to connect to this server on. */
598		port = 6666;
599
600		/*
#	Line 600 | Line 609 | connect {
609		*/
610		#       leaf_mask = "*.uk";
611
612	<	/* class: the class this server is in */
612	>	/* class: the class this server is in. */
613		class = "server";
614
615		/*
616	<	* ssl_cipher_list:
617	<	*
618	<	* List of ciphers that the server we are connecting to must support.
610	<	* If the server is not capable of using any of the ciphers listed below,
611	<	* the connection will simply be rejected.
616	>	* ssl_cipher_list: list of ciphers that the server we are connecting to
617	>	* must support. If the server is not capable of using any of the ciphers
618	>	* listed below, the connection will simply be rejected.
619		* Can be used to enforce stronger ciphers, even though this option
620		* is not necessarily required to establish a SSL/TLS connection.
621		*
#	Line 633 | Line 640 | connect {
640		};
641
642		connect {
643	<	name = "ipv6.some.server";
644	<	host = "3ffd:dead:beef::1";
643	>	name = "ipv6.example.net";
644	>	host = "2001:DB8::3";
645		send_password = "password";
646		accept_password = "password";
647		port = 6666;
#	Line 660 | Line 667 | cluster {
667		*       will not be propagated to clustered servers.
668		*
669		*       Remote servers are not necessarily required to accept
670	<	*       clustered lines, they need a shared{} for *THIS* server
671	<	*       in order to accept them.
670	>	*       clustered lines, they need a shared {} block for *THIS*
671	>	*       server in order to accept them.
672		*/
673	<	name = "*.arpa";
673	>	name = "*.example.net";
674
675		/*
676		* type: list of what to share; options are as follows:
#	Line 695 | Line 702 | shared {
702		* If this is not specified, the user will be allowed to kline from all
703		* servers.
704		*/
705	<	name = "irc2.some.server";
705	>	name = "irc2.example.net";
706
707		/*
708		* user: the user@host mask that is allowed to set klines. If this is
#	Line 722 | Line 729 | shared {
729
730		/*
731		* kill {}:  users that are not allowed to connect
732	<	* Oper issued klines will be added to the specified kline config
732	>	* Oper issued klines will be added to the specified kline database
733		*/
734		kill {
735	<	user = "bad@*.hacked.edu";
735	>	user = "bad@*.example.net";
736		reason = "Obviously hacked account";
737		};
738
739		/*
740		* deny {}:  IP addresses that are not allowed to connect
741		* (before DNS/ident lookup)
742	<	* Oper issued dlines will be added to the specified dline config
742	>	* Oper issued dlines will be added to the specified dline database
743		*/
744		deny {
745	<	ip = "10.0.1.0/24";
745	>	ip = "192.0.2.0/28";
746		reason = "Reconnecting vhosted bots";
747		};
748
#	Line 743 | Line 750 | deny {
750		* exempt {}:  IP addresses that are exempt from deny {} and Dlines
751		*/
752		exempt {
753	<	ip = "192.168.0.0/16";
753	>	ip = "192.0.2.240/28";
754		};
755
756		/*
757		* resv {}:  nicks and channels users may not use/join
758		*/
759		resv { mask = "clone*"; reason = "Clone bots"; };
760	+	resv { mask = "Global"; reason = "Reserved for services"; };
761		resv { mask = "ChanServ"; reason = "Reserved for services"; };
762		resv { mask = "NickServ"; reason = "Reserved for services"; };
763		resv { mask = "OperServ"; reason = "Reserved for services"; };
#	Line 766 | Line 774 | resv {
774		* as channel name masks.
775		*/
776		mask = "#helsinki";
777	<	reason = "Channel is reserved for finnish inhabitants";
777	>	reason = "Channel is reserved for Finnish inhabitants";
778
779		/*
780		* exempt: can be either a ISO 3166 alpha-2 two letter country
#	Line 777 | Line 785 | resv {
785		};
786
787		/*
788	<	* gecos {}:  Used for banning users based on their "realname".
788	>	* gecos {}:  used for banning users based on their "realname".
789		*/
790		gecos {
791		name = "*sex*";
#	Line 790 | Line 798 | gecos {
798		};
799
800		/*
801	<	* channel {}:  The channel block contains options pertaining to channels
801	>	* service {}: specifies a server which may act as a network service
802	>	*
803	>	* NOTE: it is very important that every server on the network
804	>	*       has the same service {} block.
805	>	*/
806	>	service {
807	>	name = "service.example.net";
808	>	name = "stats.example.net";
809	>	};
810	>
811	>	/*
812	>	* pseudo {}: adds pseudo/custom commands also known as service aliases
813	>	*/
814	>	pseudo {
815	>	/* command: the actual command/alias. */
816	>	command = "IDENTIFY";
817	>
818	>	/* prepend: optional text that can be prepended before the user's message. */
819	>	prepend = "IDENTIFY ";
820	>
821	>	/* name: the service name, used for error messages. */
822	>	name = "NickServ";
823	>
824	>	/* target: the actual target where this message should be sent to. */
825	>	target = "NickServ@service.example.net";
826	>	};
827	>
828	>	pseudo {
829	>	command = "CHANSERV";
830	>	name = "ChanServ";
831	>	target = "ChanServ@service.example.net";
832	>	};
833	>
834	>	pseudo {
835	>	command = "CS";
836	>	name = "ChanServ";
837	>	target = "ChanServ@service.example.net";
838	>	};
839	>
840	>	pseudo {
841	>	command = "NICKSERV";
842	>	name = "NickServ";
843	>	target = "NickServ@service.example.net";
844	>	};
845	>
846	>	pseudo {
847	>	command = "NS";
848	>	name = "NickServ";
849	>	target = "NickServ@service.example.net";
850	>	};
851	>
852	>	pseudo {
853	>	command = "MEMOSERV";
854	>	name = "MemoServ";
855	>	target = "MemoServ@service.example.net";
856	>	};
857	>
858	>	pseudo {
859	>	command = "MS";
860	>	name = "MemoServ";
861	>	target = "MemoServ@service.example.net";
862	>	};
863	>
864	>	pseudo {
865	>	command = "OPERSERV";
866	>	name = "OperServ";
867	>	target = "OperServ@service.example.net";
868	>	};
869	>
870	>	pseudo {
871	>	command = "OS";
872	>	name = "OperServ";
873	>	target = "OperServ@service.example.net";
874	>	};
875	>
876	>	pseudo {
877	>	command = "HOSTSERV";
878	>	name = "HostServ";
879	>	target = "HostServ@service.example.net";
880	>	};
881	>
882	>	pseudo {
883	>	command = "HS";
884	>	name = "HostServ";
885	>	target = "HostServ@service.example.net";
886	>	};
887	>
888	>	pseudo {
889	>	command = "BOTSERV";
890	>	name = "BotServ";
891	>	target = "BotServ@service.example.net";
892	>	};
893	>
894	>	pseudo {
895	>	command = "BS";
896	>	name = "BotServ";
897	>	target = "BotServ@service.example.net";
898	>	};
899	>
900	>	/*
901	>	* channel {}:  the channel block contains options pertaining to channels
902		*/
903		channel {
904		/*
#	Line 809 | Line 917 | channel {
917		disable_fake_channels = yes;
918
919		/*
920	<	* knock_delay: The amount of time a user must wait between issuing
921	<	* the knock command.
920	>	* invite_client_count, invite_client_time: how many INVITE commands
921	>	* are permitted per client per invite_client_time.
922		*/
923	<	knock_delay = 5 minutes;
923	>	invite_client_count = 10;
924	>	invite_client_time = 5 minutes;
925
926		/*
927	<	* knock_delay_channel: How often a knock to any specific channel
928	<	* is permitted, regardless of the user sending the knock.
927	>	* knock_client_count, knock_client_time: how many KNOCK commands
928	>	* are permitted per client per knock_client_time.
929		*/
930	<	knock_delay_channel = 1 minute;
930	>	knock_client_count = 1;
931	>	knock_client_time = 5 minutes;
932
933		/*
934	<	* max_chans_per_user: The maximum number of channels a user can
935	<	* join/be on.
934	>	* knock_delay_channel: how often a KNOCK to any specific channel
935	>	* is permitted, regardless of the user sending the KNOCK.
936		*/
937	<	max_chans_per_user = 25;
937	>	knock_delay_channel = 1 minute;
938
939		/*
940	<	* max_chans_per_oper: The maximum number of channels an oper can
941	<	* join/be on.
940	>	* max_channels: the maximum number of channels a user can join/be on.
941	>	* This is a default value which can be overriden with class {} blocks.
942		*/
943	<	max_chans_per_oper = 50;
943	>	max_channels = 25;
944
945	<	/* max_bans: maximum number of +b/e/I modes in a channel */
945	>	/* max_bans: maximum number of +b/e/I modes in a channel. */
946		max_bans = 100;
947
948		/*
949	<	* how many joins in how many seconds constitute a flood. Use 0 to
950	<	* disable. +b opers will be notified (changeable via /set)
951	<	*/
952	<	join_flood_count = 16;
843	<	join_flood_time = 8 seconds;
844	<
845	<	/*
846	<	* The ircd will now check splitmode (whether a server is split from
847	<	* the network) every few seconds; this functionality is known as
848	<	* splitcode and is influenced by the options below.
849	<	*
850	<	* Either split users or split servers can activate splitmode, but
851	<	* both conditions must be met for the ircd to deactivate splitmode.
852	<	*
853	<	* You may force splitmode to be permanent by /quote set splitmode on
854	<	*/
855	<
856	<	/*
857	<	* default_split_user_count: when the usercount is lower than this level,
858	<	* consider ourselves split. This must be set for automatic splitmode.
949	>	* default_join_flood_count, default_join_flood_time:
950	>	* how many joins in how many seconds constitute a flood. Use 0 to disable.
951	>	* +b opers will be notified. These are only default values which can be
952	>	* changed via "/QUOTE SET JFLOODCOUNT" and "/QUOTE SET JFLOODTIME".
953		*/
954	<	default_split_user_count = 0;
955	<
862	<	/*
863	<	* default_split_server_count: when the servercount is lower than this,
864	<	* consider ourselves split. This must be set for automatic splitmode.
865	<	*/
866	<	default_split_server_count = 0;
867	<
868	<	/* no_create_on_split: do not allow users to create channels on split. */
869	<	no_create_on_split = yes;
870	<
871	<	/* no_join_on_split: do not allow users to join channels on a split. */
872	<	no_join_on_split = no;
954	>	default_join_flood_count = 18;
955	>	default_join_flood_time = 6 seconds;
956		};
957
958		/*
959	<	* serverhide {}:  The serverhide block contains the options regarding
960	<	* to server hiding
959	>	* serverhide {}:  the serverhide block contains the options regarding
960	>	* to server hiding. For more information regarding server hiding,
961	>	* please see doc/serverhide.txt
962		*/
963		serverhide {
964		/*
#	Line 890 | Line 974 | serverhide {
974		flatten_links = no;
975
976		/*
977	<	* links_delay: how often to update the links file when it is
977	>	* flatten_links_delay: how often to update the links file when it is
978		* flattened.
979		*/
980	<	links_delay = 5 minutes;
980	>	flatten_links_delay = 5 minutes;
981	>
982	>	/*
983	>	* flatten_links_file: path to the flatten links cache file.
984	>	*/
985	>	flatten_links_file = "var/lib/links.txt";
986
987		/*
988		* hidden: hide this server from a /links output on servers that
#	Line 909 | Line 998 | serverhide {
998
999		/*
1000		* hide_services: define this if you want to hide the location of
1001	<	* services servers that are specified in the service{} block.
1001	>	* services servers that are specified in the service {} block.
1002		*/
1003		hide_services = no;
1004
1005		/*
1006	<	* Use this as the servername users see if hide_servers = yes.
1006	>	* hidden_name: use this as the servername users see if hide_servers = yes.
1007		*/
1008	<	hidden_name = "*.hidden.com";
1008	>	hidden_name = "*.example.net";
1009
1010		/*
1011	<	* hide_server_ips: If this is disabled, opers will be unable to see
1011	>	* hide_server_ips: if this is disabled, opers will be unable to see
1012		* servers' IP addresses and will be shown a masked IP address; admins
1013		* will be shown the real IP address.
1014		*
#	Line 934 | Line 1023 | serverhide {
1023		};
1024
1025		/*
1026	<	* general {}:  The general block contains many of the options that were once
1026	>	* general {}:  the general block contains many of the options that were once
1027		* compiled in options in config.h
1028		*/
1029		general {
#	Line 944 | Line 1033 | general {
1033		*/
1034		cycle_on_host_change = yes;
1035
947	–	/* services_name: servername of nick/channel services */
948	–	services_name = "service.someserver";
949	–
1036		/* max_watch: maximum WATCH entries a client can have. */
1037	<	max_watch = 60;
1037	>	max_watch = 30;
1038
1039	<	/* gline_enable: enable glines (network-wide temporary klines). */
1040	<	gline_enable = yes;
1039	>	/* max_accept: maximum allowed /accept's for +g user mode. */
1040	>	max_accept = 30;
1041
1042		/*
1043	<	* gline_duration: the amount of time a gline will remain on your
1044	<	* server before expiring.
1043	>	* dline_min_cidr: the minimum required length of a CIDR bitmask
1044	>	* for IPv4 based D-lines.
1045		*/
1046	<	gline_duration = 1 day;
1046	>	dline_min_cidr = 16;
1047
1048		/*
1049	<	* gline_request_duration: how long a pending G-line can be around.
1050	<	* 10 minutes should be plenty.
1049	>	* dline_min_cidr6: the minimum required length of a CIDR bitmask
1050	>	* for IPv6 based D-lines.
1051		*/
1052	<	gline_request_duration = 10 minutes;
1052	>	dline_min_cidr6 = 48;
1053
1054		/*
1055	<	* gline_min_cidr: the minimum required length of a CIDR bitmask
1056	<	* for IPv4 based glines.
1055	>	* kline_min_cidr: the minimum required length of a CIDR bitmask
1056	>	* for IPv4 based K-lines.
1057		*/
1058	<	gline_min_cidr = 16;
1058	>	kline_min_cidr = 16;
1059
1060		/*
1061	<	* gline_min_cidr6: the minimum required length of a CIDR bitmask
1062	<	* for IPv6 based glines.
1061	>	* kline_min_cidr6: the minimum required length of a CIDR bitmask
1062	>	* for IPv6 based K-lines.
1063		*/
1064	<	gline_min_cidr6 = 48;
1064	>	kline_min_cidr6 = 48;
1065
1066		/*
1067	<	* Whether to automatically set mode +i on connecting users.
1067	>	* invisible_on_connect: whether to automatically set mode +i on
1068	>	* connecting users.
1069		*/
1070		invisible_on_connect = yes;
1071
#	Line 988 | Line 1075 | general {
1075		* automatically to the new nick. kill_chase_time_limit is the maximum
1076		* time following a nickname change that this chasing will apply.
1077		*/
1078	<	kill_chase_time_limit = 90 seconds;
1078	>	kill_chase_time_limit = 30 seconds;
1079
1080		/*
1081	<	* hide_spoof_ips: if disabled, opers will be allowed to see the real
1082	<	* IP address of spoofed users in /trace etc. If this is defined they
1083	<	* will be shown a masked IP.
997	<	*/
998	<	hide_spoof_ips = yes;
999	<
1000	<	/*
1001	<	* Ignore bogus timestamps from other servers. Yes, this will desync the
1002	<	* network, but it will allow chanops to resync with a valid non TS 0
1081	>	* ignore_bogus_ts: ignore bogus timestamps from other servers.
1082	>	* Yes, this will desync the network, but it will allow chanops
1083	>	* to resync with a valid non TS 0.
1084		*
1085		* This should be enabled network wide, or not at all.
1086		*/
#	Line 1007 | Line 1088 | general {
1088
1089		/*
1090		* disable_auth: completely disable ident lookups; if you enable this,
1091	<	* be careful of what you set need_ident to in your auth {} blocks
1091	>	* be careful of what you set need_ident to in your auth {} blocks.
1092		*/
1093		disable_auth = no;
1094
#	Line 1019 | Line 1100 | general {
1100
1101		/*
1102		* default_floodcount: the default value of floodcount that is configurable
1103	<	* via /quote set floodcount. This is the number of lines a user
1104	<	* may send to any other user/channel in one second.
1103	>	* via /quote set floodcount. This is the number of lines a user may send
1104	>	* to any other user/channel in one second. Set to 0 to disable.
1105		*/
1106		default_floodcount = 10;
1107
#	Line 1038 | Line 1119 | general {
1119
1120		/*
1121		* min_nonwildcard: the minimum number of non-wildcard characters in
1122	<	* k/d/g lines placed via the server. K-lines hand-placed are exempt from
1122	>	* k/d lines placed via the server. K-lines hand-placed are exempt from
1123		* this limit.
1124	<	* Wildcard chars: '.', ':', '*', '?', '@', '!'
1124	>	* Wildcard characters: '.', ':', '*', '?'
1125		*/
1126		min_nonwildcard = 4;
1127
1128		/*
1129		* min_nonwildcard_simple: the minimum number of non-wildcard characters
1130	<	* in gecos bans. Wildcard chars: '*', '?'
1130	>	* in gecos bans. Wildcard characters: '*', '?'
1131		*/
1132		min_nonwildcard_simple = 3;
1133
1053	–	/* max_accept: maximum allowed /accept's for +g usermode. */
1054	–	max_accept = 20;
1055	–
1134		/* anti_nick_flood: enable the nickflood control code. */
1135		anti_nick_flood = yes;
1136
1137	<	/* nick flood: the number of nick changes allowed in the specified period */
1138	<	max_nick_time = 20 seconds;
1137	>	/*
1138	>	* max_nick_changes, max_nick_time: the number of nick changes allowed in
1139	>	* the specified period.
1140	>	*/
1141		max_nick_changes = 5;
1142	+	max_nick_time = 20 seconds;
1143	+
1144	+	/*
1145	+	* away_count, away_time: how many AWAY command are permitted per
1146	+	* client per away_time.
1147	+	*/
1148	+	away_count = 2;
1149	+	away_time = 10 seconds;
1150
1151		/*
1152		* anti_spam_exit_message_time: the minimum time a user must be connected
#	Line 1067 | Line 1155 | general {
1155		anti_spam_exit_message_time = 5 minutes;
1156
1157		/*
1158	<	* ts delta: the time delta allowed between server clocks before
1159	<	* a warning is given, or before the link is dropped. All servers
1160	<	* should run ntpdate/rdate to keep clocks in sync
1158	>	* ts_warn_delta, ts_max_delta: the time delta allowed between server
1159	>	* clocks before a warning is given, or before the link is dropped.
1160	>	* All servers should run ntpdate/rdate to keep clocks in sync.
1161		*/
1162	<	ts_warn_delta = 30 seconds;
1163	<	ts_max_delta = 5 minutes;
1162	>	ts_warn_delta = 3 seconds;
1163	>	ts_max_delta = 15 seconds;
1164
1165		/*
1166	<	* warn_no_nline: warn opers about servers that try to connect but
1167	<	* for which we don't have a connect {} block. Twits with misconfigured
1168	<	* servers can become really annoying with this enabled.
1166	>	* warn_no_connect_block: warn opers about servers that try to connect
1167	>	* but for which we don't have a connect {} block. Twits with
1168	>	* misconfigured servers can become really annoying with this enabled.
1169		*/
1170	<	warn_no_nline = yes;
1170	>	warn_no_connect_block = yes;
1171
1172		/*
1173		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1174		* operators and administrators. Doing so is a good idea in case
1175	<	* there are any exempted (exempt{}) server IPs you don't want to
1175	>	* there are any exempted (exempt {}) server IPs you don't want to
1176		* see leaked.
1177		*/
1178		stats_e_disabled = no;
1179
1180	<	/* stats_o_oper only: make stats o (opers) oper only */
1180	>	/* stats_m_oper_only: make /stats m/M (messages) oper only. */
1181	>	stats_m_oper_only = yes;
1182	>
1183	>	/* stats_o_oper_only: make stats o (opers) oper only. */
1184		stats_o_oper_only = yes;
1185
1186	<	/* stats_P_oper_only: make stats P (ports) oper only */
1186	>	/* stats_P_oper_only: make stats P (ports) oper only. */
1187		stats_P_oper_only = yes;
1188
1189	<	/* stats_u_oper_only: make stats u (uptime) oper only */
1189	>	/* stats_u_oper_only: make stats u (uptime) oper only. */
1190		stats_u_oper_only = no;
1191
1192		/*
1193	<	* stats i oper only: make stats i (auth {}) oper only. Set to:
1194	<	*     yes    - show users no auth blocks, made oper only.
1195	<	*     masked - show users the first matching auth block
1196	<	*     no     - show users all auth blocks.
1193	>	* stats_i_oper_only: make stats i (auth {}) oper only. Set to:
1194	>	*     yes    - show users no auth {} blocks, made oper only
1195	>	*     masked - show users the first matching auth {} block
1196	>	*     no     - show users all auth {} blocks
1197		*/
1198		stats_i_oper_only = yes;
1199
1200		/*
1201		* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1202	<	*     yes    - show users no auth blocks, made oper only
1203	<	*     masked - show users the first matching auth block
1204	<	*     no     - show users all auth blocks.
1202	>	*     yes    - show users no klines, made oper only
1203	>	*     masked - show users the first matching kline
1204	>	*     no     - show users all klines
1205		*/
1206		stats_k_oper_only = yes;
1207
#	Line 1122 | Line 1213 | general {
1213
1214		/*
1215		* opers_bypass_callerid: allows operators to bypass +g and message
1216	<	* anyone who has it set (useful if you use services).
1216	>	* anyone who has it set.
1217		*/
1218		opers_bypass_callerid = no;
1219
1220		/*
1221		* pace_wait_simple: minimum time required between use of less
1222		* intensive commands
1223	<	* (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1223	>	* (ADMIN, HELP, LUSERS, VERSION, remote WHOIS)
1224		*/
1225		pace_wait_simple = 1 second;
1226
1227		/*
1228		* pace_wait: minimum time required between use of more intensive commands
1229	<	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1229	>	* (INFO, LINKS, MAP, MOTD, STATS, WHO, WHOWAS)
1230		*/
1231		pace_wait = 10 seconds;
1232
#	Line 1146 | Line 1237 | general {
1237		short_motd = no;
1238
1239		/*
1240	<	* ping_cookie: require clients to respond exactly to a ping command,
1240	>	* ping_cookie: require clients to respond exactly to a PING command,
1241		* can help block certain types of drones and FTP PASV mode spoofing.
1242		*/
1243		ping_cookie = no;
#	Line 1155 | Line 1246 | general {
1246		no_oper_flood = yes;
1247
1248		/*
1158	–	* true_no_oper_flood: completely eliminate flood limits for opers
1159	–	* and for clients with can_flood = yes in their auth {} blocks.
1160	–	*/
1161	–	true_no_oper_flood = yes;
1162	–
1163	–	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1164	–	oper_pass_resv = yes;
1165	–
1166	–	/* REMOVE ME. The following line checks that you have been reading. */
1167	–	havent_read_conf = 1;
1168	–
1169	–	/*
1249		* max_targets: the maximum number of targets in a single
1250		* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1251		*/
1252		max_targets = 4;
1253
1254		/*
1255	<	* usermodes configurable: a list of usermodes for the options below
1255	>	* user modes configurable: a list of user modes for the options below
1256		*
1257		* +b - bots         - See bot and drone flooding notices
1258		* +c - cconn        - Client connection/quit notices
#	Line 1181 | Line 1260 | general {
1260		* +d - debug        - See debugging notices
1261		* +e - external     - See remote server connection and split notices
1262		* +F - farconnect   - Remote client connection/quit notices
1263	<	* +f - full         - See auth{} block full notices
1263	>	* +f - full         - See auth {} block full notices
1264		* +G - softcallerid - Server Side Ignore for users not on your channels
1265		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1266		* +H - hidden       - Hides operator status to other users
#	Line 1190 | Line 1269 | general {
1269		* +k - skill        - See server generated KILL messages
1270		* +l - locops       - See LOCOPS messages
1271		* +n - nchange      - See client nick changes
1272	+	* +p - hidechans    - Hides channel list in WHOIS
1273	+	* +q - hideidle     - Hides idle and signon time in WHOIS
1274		* +R - nononreg     - Only receive private messages from registered clients
1275		* +s - servnotice   - See general server notices
1276		* +u - unauth       - See unauthorized client notices
1277		* +w - wallop       - See server generated WALLOPS
1278		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1198	–	* +z - operwall     - See oper generated WALLOPS
1279		*/
1280
1281	<	/* oper_only_umodes: usermodes only opers may set */
1282	<	oper_only_umodes = bots, cconn, debug, full, hidden, skill,
1283	<	nchange, rej, spy, external, operwall,
1204	<	locops, unauth, farconnect;
1205	<
1206	<	/* oper_umodes: default usermodes opers get when they /oper */
1207	<	oper_umodes = bots, locops, servnotice, operwall, wallop;
1281	>	/* oper_only_umodes: user modes only operators may set. */
1282	>	oper_only_umodes = bots, cconn, debug, external, farconnect, full, hidden, locops,
1283	>	nchange, rej, skill, spy, unauth;
1284
1285	<	/*
1286	<	* use_egd: if your system does not have *random devices yet you
1211	<	* want to use OpenSSL and encrypted links, enable this. Beware -
1212	<	* EGD is *very* CPU intensive when gathering data for its pool.
1213	<	*/
1214	<	#       use_egd = yes;
1285	>	/* oper_umodes: default user modes operators get when they /oper. */
1286	>	oper_umodes = bots, locops, servnotice, wallop;
1287
1288		/*
1289	<	* egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1290	<	* which automatically finds the path.
1289	>	* throttle_count: the maximum number of connections from the same
1290	>	* IP address allowed in throttle_time duration.
1291		*/
1292	<	#       egdpool_path = "/var/run/egd-pool";
1292	>	throttle_count = 1;
1293
1294		/*
1295		* throttle_time: the minimum amount of time required between
1296	<	* connections from the same IP address. exempt {} blocks are excluded
1297	<	* from this throttling.
1296	>	* connections from the same IP address. exempt {} blocks are
1297	>	* excluded from this throttling.
1298		* Offers protection against flooders who reconnect quickly.
1299		* Set to 0 to disable.
1300		*/
1301	<	throttle_time = 10;
1301	>	throttle_time = 2 seconds;
1302		};
1303
1304		modules {
#	Line 1234 | Line 1306 | modules {
1306		* path: other paths to search for modules specified below
1307		* and in "/module load".
1308		*/
1309	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1310	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1309	>	path = "lib/ircd-hybrid/modules";
1310	>	#       path = "lib/ircd-hybrid/modules/extra";
1311	>	path = "lib/ircd-hybrid/modules/autoload";
1312
1313		/* module: the name of a module to load on startup/rehash. */
1314		#       module = "some_module.la";
#	Line 1250 | Line 1323 | log {
1323
1324		file {
1325		type = oper;
1326	<	name = "/usr/local/ircd/var/log/oper.log";
1326	>	name = "var/log/oper.log";
1327		size = unlimited;
1328		};
1329
1330		file {
1331		type = user;
1332	<	name = "/usr/local/ircd/var/log/user.log";
1332	>	name = "var/log/user.log";
1333		size = 50 megabytes;
1334		};
1335
1336		file {
1337		type = kill;
1338	<	name = "/usr/local/ircd/var/log/kill.log";
1338	>	name = "var/log/kill.log";
1339		size = 50 megabytes;
1340		};
1341
1342		file {
1343		type = kline;
1344	<	name = "/usr/local/ircd/var/log/kline.log";
1344	>	name = "var/log/kline.log";
1345		size = 50 megabytes;
1346		};
1347
1348		file {
1349		type = dline;
1350	<	name = "/usr/local/ircd/var/log/dline.log";
1278	<	size = 50 megabytes;
1279	<	};
1280	<
1281	<	file {
1282	<	type = gline;
1283	<	name = "/usr/local/ircd/var/log/gline.log";
1350	>	name = "var/log/dline.log";
1351		size = 50 megabytes;
1352		};
1353
1354		file {
1355		type = xline;
1356	<	name = "/usr/local/ircd/var/log/xline.log";
1356	>	name = "var/log/xline.log";
1357		size = 50 megabytes;
1358		};
1359
1360		file {
1361		type = resv;
1362	<	name = "/usr/local/ircd/var/log/resv.log";
1362	>	name = "var/log/resv.log";
1363		size = 50 megabytes;
1364		};
1365
1366		file {
1367		type = debug;
1368	<	name = "/usr/local/ircd/var/log/debug.log";
1368	>	name = "var/log/debug.log";
1369		size = 50 megabytes;
1370		};
1371		};

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)