ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/doc/reference.conf

Comparing:
ircd-hybrid-7.2/etc/example.conf.in (file contents), Revision 897 by db, Sat Nov 3 17:13:32 2007 UTC vs.
ircd-hybrid/trunk/doc/reference.conf (file contents), Revision 4494 by michael, Sat Aug 16 18:08:45 2014 UTC

#	Line 1 | Line 1
1	<	/* doc/example.conf - ircd-hybrid-7 Example configuration file
2	<	* Copyright (C) 2000-2006 Hybrid Development Team
1	>	/*
2	>	* This is an example configuration file for ircd-hybrid
3		*
4	<	* Written by ejb, wcampbel, db, leeh and others
5	<	* Other example configurations can be found in the source dir under
6	<	* etc/.
4	>	* Copyright (c) 2000-2014 ircd-hybrid development team
5		*
6		* $Id$
7		*/
8
9	<	/* IMPORTANT NOTES:
9	>	/*
10	>	* ########################################################################
11	>	* IMPORTANT NOTE:
12		*
13	<	* auth {} blocks MUST be specified in order of precedence.  The first one
14	<	* that matches a user will be used.  So place spoofs first, then specials,
13	>	* auth {} blocks MUST be specified in order of precedence. The first one
14	>	* that matches a user will be used. So place spoofs first, then specials,
15		* then general access.
16	+	* ########################################################################
17		*
18		* Shell style (#), C++ style (//) and C style comments are supported.
19		*
#	Line 22 | Line 23
23		*
24		* Times/durations are written as:
25		*        12 hours 30 minutes 1 second
26	<	*
26	>	*
27		* Valid units of time:
28	<	*        month, week, day, hour, minute, second
28	>	*        year, month, week, day, hour, minute, second
29		*
30		* Valid units of size:
31		*        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
32		*
33	<	* Sizes and times may be singular or plural.
33	<	*/
34	<
35	<	/* EFNET NOTE:
36	<	*
37	<	* This config file is NOT suitable for EFNet.  EFNet admins should use
38	<	* example.efnet.conf
33	>	* Sizes and times may be singular or plural.
34		*/
35	<
35	>
36	>
37		/*
38	<	* serverinfo {}:  contains information about the server. (OLD M:)
38	>	* serverinfo {}:  contains information about the server
39		*/
40		serverinfo {
41		/*
42	<	* name: the name of our server.  This cannot be changed at runtime.
42	>	* name: the name of this server. This cannot be changed at runtime.
43		*/
44		name = "hades.arpa";
45
46		/*
47	<	* sid: a server's unique ID.  This is three characters long and must
48	<	* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
47	>	* sid: a server's unique ID. This is three characters long and must
48	>	* be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	<	* NOTE: The letters must be capitalized.  This cannot be changed at runtime.
50	>	*
51	>	* NOTE: The letters must be capitalized. This cannot be changed at runtime.
52		*/
53	<	sid = "_CHANGE_ME_";
53	>	sid = "0HY";
54
55		/*
56	<	* description: the description of the server.  '[' and ']' may not
60	<	* be used here for compatibility with older servers.
56	>	* description: the description of the server.
57		*/
58	<	description = "hybrid-7 test server";
58	>	description = "ircd-hybrid test server";
59
60		/*
61		* network info: the name and description of the network this server
62	<	* is on.  Shown in the 005 reply and used with serverhiding.
62	>	* is on. Shown in the 005 reply and used with serverhiding.
63		*/
64		network_name = "MyNet";
65		network_desc = "This is My Network";
#	Line 76 | Line 72 | serverinfo {
72
73		/*
74		* vhost: the IP to bind to when we connect outward to ipv4 servers.
75	<	* This should be an ipv4 IP only, or "* for INADDR_ANY.
75	>	* This should be an ipv4 IP only, or "*" for INADDR_ANY.
76		*/
77	<	#vhost = "192.169.0.1";
77	>	#       vhost = "192.169.0.1";
78
79		/*
80	<	* vhost6: the IP to bind to when we connect outward to ipv6 servers.
81	<	* This should be an ipv6 IP only, or "* for INADDR_ANY.
80	>	* vhost6: the address to bind to when we make outgoing connections
81	>	* to IPv6 servers. This should be an IPv6 address, or "*" for INADDR_ANY.
82		*/
83	<	#vhost6 = "3ffe:80e8:546::2";
83	>	#       vhost6 = "3ffe:80e8:546::2";
84
85	<	/* max_clients: the maximum number of clients allowed to connect */
85	>	/* max_clients: the maximum number of clients allowed to connect. */
86		max_clients = 512;
87
88		/*
89	<	* rsa key: the path to the file containing our rsa key for cryptlink.
89	>	* max_nick_length: only applies to local clients. Must be in the
90	>	* range of 9 to 30. Default is 9 if nothing else is specified.
91	>	*/
92	>	max_nick_length = 9;
93	>
94	>	/*
95	>	* max_topic_length: only applies to topics set by local clients.
96	>	* Must be in the range of 80 to 300. Default is 80 if nothing
97	>	* else is specified.
98	>	*/
99	>	max_topic_length = 160;
100	>
101	>	/*
102	>	* rsa_private_key_file: the path to the file containing the
103	>	* RSA key.
104		*
105	<	* Example command to store a 2048 bit RSA keypair in
106	<	* rsa.key, and the public key in rsa.pub:
107	<	*
108	<	*      openssl genrsa -out rsa.key 2048
99	<	*      openssl rsa -in rsa.key -pubout -out rsa.pub
100	<	*      chown <ircd-user>.<ircd.group> rsa.key rsa.pub
105	>	* Example commands to store a 2048 bit RSA key in rsa.key:
106	>	*
107	>	*      openssl genrsa -out rsa.key 2048
108	>	*      chown <ircd-user>.<ircd.group> rsa.key
109		*      chmod 0600 rsa.key
102	–	*      chmod 0644 rsa.pub
110		*/
111	<	#rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
111	>	#       rsa_private_key_file = "etc/rsa.key";
112
113		/*
114	<	* ssl certificate: the path to the file containing our ssl certificate
115	<	* for encrypted client connection.
114	>	* ssl_certificate_file: the path to the file containing our
115	>	* SSL certificate for encrypted client connection.
116		*
117		* This assumes your private RSA key is stored in rsa.key. You
118	<	* MUST have an RSA key in order to generate the certificate
118	>	* MUST have an RSA key in order to generate the certificate.
119	>	*
120	>	* Example command:
121		*
122		*      openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
123		*
#	Line 121 | Line 130 | serverinfo {
130		*      Common Name: irc.someirc.net
131		*      E-mail: you@domain.com
132		*/
133	<	#ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
125	<	};
133	>	#       ssl_certificate_file = "etc/cert.pem";
134
135	<	/*
136	<	* admin {}:  contains admin information about the server. (OLD A:)
137	<	*/
138	<	admin {
139	<	name = "Smurf target";
140	<	description = "Main Server Administrator";
141	<	email = "<syn@packets.r.us>";
142	<	};
135	>	/*
136	>	* ssl_dh_param_file: path to the PEM encoded Diffie-Hellman
137	>	* parameter file. DH parameters are required when using
138	>	* ciphers with EDH (ephemeral Diffie-Hellman) key exchange.
139	>	*
140	>	* A DH parameter file can be created by running:
141	>	*
142	>	*      openssl dhparam -out dhparam.pem 2048
143	>	*
144	>	* Prime size must be at least 1024 bits. Further information
145	>	* regarding specific OpenSSL dhparam command-line options
146	>	* can be found in the OpenSSL manual.
147	>	*/
148	>	#       ssl_dh_param_file = "etc/dhparam.pem";
149
150	<	/*
151	<	* log {}:  contains information about logfiles.
152	<	*/
153	<	log {
154	<	/* Do you want to enable logging to ircd.log? */
155	<	use_logging = yes;
150	>	/*
151	>	* ssl_dh_elliptic_curve: defines the curve to use for the
152	>	* Elliptic Curve Diffie-Hellman (ECDH) algorithm.
153	>	* Default is ANSI X9.62 prime256v1/secp256r1 if nothing else is specified.
154	>	*
155	>	* A list of supported curves by OpenSSL can be obtained by running:
156	>	*
157	>	*      openssl ecparam -list_curves
158	>	*/
159	>	#       ssl_dh_elliptic_curve = "secp521r1";
160
161		/*
162	<	* logfiles: the logfiles to use for user connects, /oper uses,
163	<	* and failed /oper.  These files must exist for logging to be used.
162	>	* ssl_cipher_list: list of ciphers to support on _this_ server.
163	>	* Can be used to enforce specific ciphers for incoming SSL/TLS
164	>	* connections. If a client (which also includes incoming server connections)
165	>	* is not capable of using any of the ciphers listed here, the connection will
166	>	* simply be rejected.
167	>	*
168	>	* A list of supported ciphers by OpenSSL can be obtained by running:
169	>	*
170	>	*      openssl ciphers -ssl3 -tls1 -v
171	>	*
172	>	* Multiple ciphers are separated by colons. The order of preference is
173	>	* from left to right.
174		*/
175	<	fname_userlog = "logs/userlog";
148	<	fname_operlog = "logs/operlog";
149	<	fname_killlog = "logs/kill";
150	<	fname_klinelog = "logs/kline";
151	<	fname_glinelog = "logs/gline";
175	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
176
177		/*
178	<	* log_level: the amount of detail to log in ircd.log.  The
179	<	* higher, the more information is logged.  May be changed
180	<	* once the server is running via /quote SET LOG.  Either:
181	<	* L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
178	>	* ssl_message_digest_algorithm: defines what cryptographic hash function
179	>	* to use for generating fingerprint hashes of X.509 certificates.
180	>	* Default is SHA-256 if nothing else is specified.
181	>	*
182	>	* A list of supported message digest algorithms by OpenSSL can be obtained by running:
183	>	*
184	>	*      openssl list-message-digest-algorithms
185		*/
186	<	log_level = L_INFO;
186	>	#       ssl_message_digest_algorithm = "sha256";
187	>	};
188	>
189	>	/*
190	>	* admin {}:  contains admin information about the server
191	>	*/
192	>	admin {
193	>	name = "Smurf target";
194	>	description = "Main Server Administrator";
195	>	email = "<syn@packets.r.us>";
196		};
197
198		/*
199	<	* class {}:  contains information about classes for users (OLD Y:)
199	>	* class {}:  contains information about classes for users
200		*/
201		class {
202	<	/* name: the name of the class.  classes are text now */
202	>	/* name: the name of the class. */
203		name = "users";
204
205		/*
#	Line 174 | Line 210 | class {
210
211		/*
212		* number_per_ip: how many local users are allowed to connect
213	<	* from one IP  (optional)
213	>	* from a single IP address (optional)
214		*/
215		number_per_ip = 2;
216
217		/*
218		* max_local: how many local users are allowed to connect
219	<	* from one ident@host  (optional)
219	>	* from a single ident@host (optional)
220		*/
221		max_local = 2;
222
223		/*
224	<	* max_global: network-wide limit of users per ident@host  (optional)
224	>	* max_global: network-wide limit of users per ident@host (optional)
225		*/
226		max_global = 10;
227
#	Line 195 | Line 231 | class {
231		max_number = 100;
232
233		/*
234	<	* the following lines are optional and allow you to define
235	<	* how many users can connect from one /NN subnet
234	>	* The following lines are optional and allow you to define
235	>	* how many users can connect from one /NN subnet.
236		*/
237		cidr_bitlen_ipv4 = 24;
238		cidr_bitlen_ipv6 = 120;
239		number_per_cidr = 16;
240
241		/*
242	<	* sendq: the amount of data allowed in a clients queue before
242	>	* sendq: the amount of data allowed in a client's send queue before
243		* they are dropped.
244		*/
245		sendq = 100 kbytes;
246	+
247	+	/*
248	+	* recvq: the amount of data allowed in a client's receive queue before
249	+	* they are dropped for flooding. Defaults to 2560 if the chosen value
250	+	* isn't within the range of 512 to 8000.
251	+	*/
252	+	recvq = 2560 bytes;
253		};
254
255		class {
#	Line 214 | Line 257 | class {
257		ping_time = 90 seconds;
258		number_per_ip = 10;
259		max_number = 100;
260	<	sendq = 100kbytes;
260	>	sendq = 100 kbytes;
261	>
262	>	/*
263	>	* max_channels: maximum number of channels users in this class can join.
264	>	*/
265	>	max_channels = 60;
266	>
267	>	/*
268	>	* min_idle: minimum idle time that is shown in /whois.
269	>	*/
270	>	min_idle = 3 hours;
271	>
272	>	/*
273	>	* max_idle: maximum idle time that is shown in /whois.
274	>	*/
275	>	max_idle = 8 hours;
276	>
277	>	/*
278	>	* flags:
279	>	*
280	>	* random_idle          - a fake idle time is set randomly between
281	>	*                        min_idle and max_idle
282	>	* hide_idle_from_opers - the fake idle time will also be shown to operators
283	>	*/
284	>	flags = random_idle, hide_idle_from_opers;
285		};
286
287		class {
#	Line 222 | Line 289 | class {
289		ping_time = 90 seconds;
290
291		/*
292	<	* ping_warning: how fast a server must reply to a PING before
226	<	* a warning to opers is generated.
227	<	*/
228	<	ping_warning = 15 seconds;
229	<
230	<	/*
231	<	* connectfreq: only used in server classes.  Specifies the delay
292	>	* connectfreq: only used in server classes. Specifies the delay
293		* between autoconnecting to servers.
294		*/
295		connectfreq = 5 minutes;
296
297	<	/* max number: the amount of servers to autoconnect to */
297	>	/* max number: the number of servers to autoconnect to. */
298		max_number = 1;
299
300	<	/* sendq: servers need a higher sendq as they send more data */
300	>	/* sendq: servers need a higher sendq as they send more data. */
301		sendq = 2 megabytes;
302		};
303
304		/*
305	<	* listen {}:  contains information about the ports ircd listens on (OLD P:)
305	>	* motd {}: Allows the display of a different MOTD to a client
306	>	* depending on its origin. Applies to local users only.
307	>	*/
308	>	motd {
309	>	/*
310	>	* mask: multiple mask entries are permitted. Mask can either be
311	>	* a class name or a hostname. CIDR is supported.
312	>	*/
313	>	mask = "*.at";
314	>	mask = "*.de";
315	>	mask = "*.ch";
316	>
317	>	/*
318	>	* file: path to the actual motd file.
319	>	*/
320	>	file = "etc/german.motd";
321	>	};
322	>
323	>	/*
324	>	* listen {}:  contains information about the ports ircd listens on
325		*/
326		listen {
327		/*
328	<	* port: the specific port to listen on.  If no host is specified
329	<	* before, it will listen on all available IPs.
328	>	* port: the port to listen on. If no host is specified earlier
329	>	* in the listen {} block, it will listen on all available IPs.
330		*
331	<	* Ports are separated via a comma, a range may be specified using ".."
331	>	* Ports are separated by commas; a range may be specified using ".."
332		*/
333	<
334	<	/* port: listen on all available IPs, ports 6665 to 6669 */
333	>
334	>	/* port: listen on all available IP addresses, ports 6665 to 6669. */
335		port = 6665 .. 6669;
336
337		/*
338	<	* Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
338	>	* Listen on 192.168.0.1/6697 with SSL enabled and hidden from STATS P
339		* unless you are an administrator.
340		*
341	<	* NOTE: The "flags" directive has to come before "port".  Always!
341	>	* NOTE: The "flags" directive always has to come before "port".
342	>	*
343	>	* Currently available flags are:
344	>	*
345	>	*  ssl    - Port may only accept TLS/SSL connections
346	>	*  server - Only server connections are permitted
347	>	*  hidden - Port is hidden from /stats P, unless you're an admin
348		*/
349		flags = hidden, ssl;
350		host = "192.168.0.1";
351		port = 6697;
352
353		/*
354	<	* host: set a specific IP/host the ports after the line will listen
355	<	* on.  This may be ipv4 or ipv6.
354	>	* host: set a specific IP address/host to listen on using the
355	>	* subsequent port definitions. This may be IPv4 or IPv6.
356		*/
357		host = "1.2.3.4";
358		port = 7000, 7001;
#	Line 276 | Line 362 | listen {
362		};
363
364		/*
365	<	* auth {}:  allow users to connect to the ircd (OLD I:)
365	>	* auth {}:  allow users to connect to the ircd
366		*/
367		auth {
368		/*
369	<	* user: the user@host allowed to connect.  Multiple IPv4/IPv6 user
370	<	* lines are permitted per auth block.
369	>	* user: the user@host allowed to connect. Multiple user
370	>	* lines are permitted within each auth {} block.
371		*/
372		user = "*@172.16.0.0/12";
373		user = "*test@123D:B567:*";
374
375	<	/* password: an optional password that is required to use this block */
375	>	/* password: an optional password that is required to use this block. */
376		password = "letmein";
377
378		/*
#	Line 296 | Line 382 | auth {
382		encrypted = yes;
383
384		/*
385	<	* spoof: fake the users host to this.  This is free-form,
386	<	* just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
385	>	* spoof: fake the user's host to this. This is free-form, just do
386	>	* everyone a favor and don't abuse it. ('=' prefix on /stats I)
387		*/
388		spoof = "I.still.hate.packets";
389
390	<	/* class: the class the user is placed in */
390	>	/* class: the class the user is placed in. */
391		class = "opers";
392
393		/*
394	<	* need_password: don't allow users who haven't supplied the correct
395	<	*                password to connect using another auth{} block
396	<	*                ('&' prefix on /stats I if disabled)
397	<	* need_ident:    require the user to have identd to connect ('+' prefix on /stats I)
398	<	* spoof_notice:  enable spoofing notification to admins
399	<	* exceed_limit:  allow a user to exceed class limits ('>' prefix on /stats I)
400	<	* kline_exempt:  exempt this user from k/glines ('^' prefix on /stats I)
401	<	* gline_exempt:  exempt this user from glines ('_' prefix on /stats I)
402	<	* resv_exempt:   exempt this user from resvs ('$' prefix on /stats I)
403	<	* no_tilde:      remove ~ from a user with no ident ('-' prefix on /stats I)
404	<	* can_flood:     allow this user to exceed flood limits ('|' prefix on /stats I)
405	<	* can_idle:      exempt this user from idle restrictions ('<' prefix on /stats I)
394	>	* need_password - don't allow users who haven't supplied the correct  | ('&' prefix on /stats I if disabled)
395	>	*                 password to connect using another auth {} block
396	>	* need_ident    - require the user to have identd to connect          | ('+' prefix on /stats I)
397	>	* spoof_notice  - enable spoofing notification to admins
398	>	* exceed_limit  - allow a user to exceed class limits                 | ('>' prefix on /stats I)
399	>	* kline_exempt  - exempt this user from k/glines                      | ('^' prefix on /stats I)
400	>	* gline_exempt  - exempt this user from glines                        | ('_' prefix on /stats I)
401	>	* resv_exempt   - exempt this user from resvs                         | ('$' prefix on /stats I)
402	>	* no_tilde      - remove ~ from a user with no ident                  | ('-' prefix on /stats I)
403	>	* can_flood     - allow this user to exceed flood limits              | ('|' prefix on /stats I)
404	>	* webirc        - enables WEBIRC authentication for web-based         | ('<' prefix on /stats I)
405	>	*                 clients such as Mibbit
406		*/
407		flags = need_password, spoof_notice, exceed_limit, kline_exempt,
408	<	gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
408	>	gline_exempt, resv_exempt, no_tilde, can_flood;
409		};
410
411		auth {
412		/*
413	<	* redirect: the server and port to redirect a user to.  A user does
414	<	* not have to obey the redirection, the ircd just suggests an alternative
415	<	* server for them.
413	>	* redirserv, redirport: the server and port to redirect a user to.
414	>	* A user does not have to obey the redirection; the ircd just
415	>	* suggests an alternative server for them.
416		*/
417	<	redirserv = "this.is.not.a.real.server";
417	>	redirserv = "server.tld";
418		redirport = 6667;
333	–
334	–	user = "*.server";
419
420	<	/* class: a class is required even though it is not used */
420	>	user = "*@*.tld";
421	>
422	>	/* class: a class is required even though it is not used. */
423		class = "users";
424		};
425
#	Line 344 | Line 430 | auth {
430		};
431
432		/*
433	<	* operator {}:  defines ircd operators. (OLD O:)
348	<	*
349	<	* ircd-hybrid no longer supports local operators, privileges are
350	<	* controlled via flags.
433	>	* operator {}:  defines ircd operators
434		*/
435		operator {
436	<	/* name: the name of the oper */
437	<	/* NOTE: operator "opername"{} is also supported */
355	<	name = "god";
436	>	/* name: the name of the operator */
437	>	name = "sheep";
438
439		/*
440	<	* user: the user@host required for this operator.  CIDR is not
441	<	* supported.  Multiple user="" lines are supported.
440	>	* user: the user@host required for this operator. Multiple user
441	>	* lines are permitted within each operator {} block.
442		*/
443	<	user = "*god@*";
444	<	user = "*@127.0.0.1";
443	>	user = "*sheep@192.168.0.0/16";
444	>	user = "*@127.0.0.0/8";
445
446		/*
447	<	* password: the password required to oper.  By default this will
448	<	* need to be encrypted using 'mkpasswd'.  MD5 is supported.
447	>	* password: the password required to oper. By default this will
448	>	* need to be encrypted by using the provided mkpasswd tool.
449	>	* Several password hash algorithms are available depending
450	>	* on your system's crypt() implementation. For example, a modern
451	>	* glibc already has support for the SHA-256/512 and MD5 encryption
452	>	* algorithms.
453		*/
454	<	password = "etcnjl8juSU1E";
454	>	password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
455
456		/*
457		* encrypted: controls whether the oper password above has been
458	<	* encrypted.  (OLD CRYPT_OPER_PASSWORD now optional per operator)
458	>	* encrypted. Default is 'yes' if nothing else is specified.
459		*/
460		encrypted = yes;
461
462		/*
463	<	* rsa_public_key_file: the public key for this oper when using Challenge.
464	<	* A password should not be defined when this is used, see
463	>	* rsa_public_key_file: the public key for this oper when using /challenge.
464	>	* A password should not be defined when this is used; see
465		* doc/challenge.txt for more information.
466		*/
467	<	#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
467	>	#       rsa_public_key_file = "etc/oper.pub";
468	>
469	>	/*
470	>	* ssl_certificate_fingerprint: enhances security by additionally checking
471	>	* the oper's client certificate fingerprint against the specified
472	>	* fingerprint below.
473	>	*
474	>	* Hint: your users can use the following command to obtain a SHA-256 hash
475	>	* of their ssl certificate:
476	>	*
477	>	*      openssl x509 -sha256 -noout -fingerprint -in cert.pem | sed -e 's/^.*=//;s/://g'
478	>	*/
479	>	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
480
481	<	/* class: the class the oper joins when they successfully /oper */
481	>	/*
482	>	* ssl_connection_required: client must be connected over SSL/TLS
483	>	* in order to be able to use this operator {} block.
484	>	* Default is 'no' if nothing else is specified.
485	>	*/
486	>	ssl_connection_required = no;
487	>
488	>	/* class: the class the oper joins when they successfully /oper or /challenge. */
489		class = "opers";
490
491		/*
492	<	* umodes: default usermodes opers get when they /oper.  If defined,
493	<	* it will override oper_umodes settings in general {}.
492	>	* umodes: the default usermodes opers get when they /oper or /challenge.
493	>	* If defined, it will override oper_umodes settings in general {}.
494		* Available usermodes:
495		*
496		* +b - bots         - See bot and drone flooding notices
497		* +c - cconn        - Client connection/quit notices
498		* +D - deaf         - Don't receive channel messages
499		* +d - debug        - See debugging notices
500	<	* +f - full         - See I: line full notices
500	>	* +e - external     - See remote server connection and split notices
501	>	* +F - farconnect   - Remote client connection/quit notices
502	>	* +f - full         - See auth {} block full notices
503		* +G - softcallerid - Server Side Ignore for users not on your channels
504		* +g - callerid     - Server Side Ignore (for privmsgs etc)
505	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
506	<	*                     a channel
505	>	* +H - hidden       - Hides operator status to other users
506	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
507	>	* +j - rej          - See rejected client notices
508		* +k - skill        - See server generated KILL messages
509		* +l - locops       - See LOCOPS messages
510		* +n - nchange      - See client nick changes
511	<	* +r - rej          - See rejected client notices
511	>	* +p - hidechans    - Hides channel list in WHOIS
512	>	* +q - hideidle     - Hides idle and signon time in WHOIS
513	>	* +R - nononreg     - Only receive private messages from registered clients
514		* +s - servnotice   - See general server notices
515		* +u - unauth       - See unauthorized client notices
516		* +w - wallop       - See server generated WALLOPS
407	–	* +x - external     - See remote server connection and split notices
517		* +y - spy          - See LINKS, STATS, TRACE notices etc.
409	–	* +z - operwall     - See oper generated WALLOPS
518		*/
519	<	#       umodes = locops, servnotice, operwall, wallop;
519	>	umodes = locops, servnotice, wallop;
520
521		/*
522	<	* privileges: controls the activities and commands an oper is
523	<	* allowed to do on the server.  All options default to no.
524	<	* Available options:
525	<	*
526	<	* global_kill:  allows remote users to be /KILL'd (OLD 'O' flag)
527	<	* remote:       allows remote SQUIT and CONNECT   (OLD 'R' flag)
528	<	* remoteban:    allows remote KLINE/UNKLINE
529	<	* kline:        allows KILL, KLINE and DLINE      (OLD 'K' flag)
530	<	* unkline:      allows UNKLINE and UNDLINE        (OLD 'U' flag)
531	<	* gline:        allows GLINE                      (OLD 'G' flag)
532	<	* xline:         allows XLINE                     (OLD 'X' flag)
533	<	* operwall:     allows OPERWALL
534	<	* nick_changes: allows oper to see nickchanges    (OLD 'N' flag)
535	<	*               via usermode +n
536	<	* rehash:       allows oper to REHASH config      (OLD 'H' flag)
537	<	* die:          allows DIE and RESTART            (OLD 'D' flag)
538	<	* admin:        gives admin privileges.  admins
539	<	*               may (un)load modules and see the
540	<	*               real IPs of servers.
541	<	* hidden_admin: same as 'admin', but noone can recognize you as
542	<	*               being an admin
543	<	* hidden_oper:  not shown in /stats p (except for other operators)
544	<	*/
545	<	/* You can either use
546	<	* die = yes;
547	<	* rehash = yes;
548	<	*
441	<	* or in a flags statement i.e.
442	<	* flags = die, rehash;
443	<	*
444	<	* You can also negate a flag with ~ i.e.
445	<	* flags = ~remote;
446	<	*
522	>	* privileges: controls the activities and commands an oper is
523	>	* allowed to do on the server. All flags default to 'no'.
524	>	* Available flags:
525	>	*
526	>	* admin          - gives administrator privileges    | ('A' flag)
527	>	* connect        - allows local CONNECT              | ('P' flag)
528	>	* connect:remote - allows remote CONNECT             | ('Q' flag)
529	>	* die            - allows DIE                        | ('D' flag)
530	>	* dline          - allows DLINE                      |
531	>	* gline          - allows GLINE                      | ('G' flag)
532	>	* globops        - allows GLOBOPS                    |
533	>	* kill           - allows to KILL local clients      | ('N' flag)
534	>	* kill:remote    - allows remote users to be /KILL'd | ('O' flag)
535	>	* kline          - allows KLINE                      | ('K' flag)
536	>	* locops         - allows LOCOPS                     |
537	>	* module         - allows MODULE                     |
538	>	* rehash         - allows oper to REHASH config      | ('H' flag)
539	>	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
540	>	* restart        - allows RESTART                    |
541	>	* set            - allows SET                        |
542	>	* squit          - allows local SQUIT                | ('R' flag)
543	>	* squit:remote   - allows remote SQUIT               | ('S' flag)
544	>	* undline        - allows UNDLINE                    |
545	>	* unkline        - allows UNKLINE                    | ('U' flag)
546	>	* unxline        - allows UNXLINE                    |
547	>	* wallops        - allows WALLOPS                    |
548	>	* xline          - allows XLINE                      | ('X' flag)
549		*/
550	<	flags = global_kill, remote, kline, unkline, xline,
551	<	die, rehash, nick_changes, admin, operwall;
550	>	flags = admin, connect, connect:remote, die, globops, kill, kill:remote,
551	>	kline, module, rehash, restart, set, unkline, unxline, xline;
552		};
553
554		/*
555	<	* connect {}:  controls servers we connect to (OLD C:, N:, H:, L:)
555	>	* service {}: specifies a server which may act as a network service
556	>	*
557	>	* NOTE: it is very important that every server on the network
558	>	*       has the same service {} block.
559	>	*/
560	>	service {
561	>	name = "service.someserver";
562	>	name = "stats.someserver";
563	>	};
564	>
565	>	/*
566	>	* connect {}: define a server to connect to
567		*/
568		connect {
569	<	/* name: the name of the server */
569	>	/* name: the name of the server. */
570		name = "irc.uplink.com";
571
572		/*
573	<	* host: the host or IP to connect to.  If a hostname is used it
574	<	* must match the reverse dns of the server.
573	>	* host: the host or IP address to connect to. If a hostname is used it
574	>	* must match the reverse DNS of the server.
575		*/
576		host = "192.168.0.1";
577
578		/*
579	<	* vhost: the IP to bind to when we connect outward to servers.
579	>	* vhost: the IP address to bind to when making outgoing connections to
580	>	* servers.
581		* serverinfo::vhost and serverinfo::vhost6 will be overridden
582		* by this directive.
583		*/
584		vhost = "192.168.0.2";
585
586		/*
587	<	* passwords: the passwords we send (OLD C:) and accept (OLD N:).
588	<	* The remote server will have these passwords reversed.
587	>	* send_password, accept_password: the passwords to send and accept.
588	>	* The remote server will have these passwords swapped.
589		*/
590		send_password = "password";
591		accept_password = "anotherpassword";
592
593		/*
594		* encrypted: controls whether the accept_password above has been
595	<	* encrypted.  (OLD CRYPT_LINK_PASSWORD now optional per connect)
595	>	* encrypted.
596		*/
597		encrypted = no;
598
599	<	/* port: the port to connect to this server on */
599	>	/* port: the port to connect to this server on. */
600		port = 6666;
601
602		/*
603	<	* hub_mask: the mask of servers that this server may hub.  Multiple
604	<	* entries are permitted
603	>	* hub_mask: the mask of servers that this server may hub. Multiple
604	>	* entries are permitted.
605		*/
606		hub_mask = "*";
607
608		/*
609	<	* leaf_mask: the mask of servers this server may not hub.  Multiple
610	<	* entries are permitted.  Useful for forbidding EU -> US -> EU routes.
609	>	* leaf_mask: the mask of servers this server may not hub. Multiple
610	>	* entries are permitted. Useful for forbidding EU -> US -> EU routes.
611		*/
612		#       leaf_mask = "*.uk";
613
614	<	/* fakename: the servername we pretend to be when we connect */
501	<	#       fakename = "*.arpa";
502	<
503	<	/* class: the class this server is in */
614	>	/* class: the class this server is in. */
615		class = "server";
616
617		/*
618	<	* autoconn:    controls whether we autoconnect to this server or not,
619	<	*              dependent on class limits.  By default, this is disabled.
620	<	* compressed:  controls whether traffic is compressed via ziplinks.
621	<	*              By default, this is disabled
622	<	* cryptlink:   enable full encryption for all data passing between our
623	<	*              server and this link and rsa authentication.
624	<	* burst_away:  This will send the /away string that users have set
625	<	*              on the server burst.  Note this can be a lot of data
515	<	*              and slow down your server burst.
516	<	* topicburst:  Send topics to this server during channel burst.  Works
517	<	*              only if the server we are connecting to is capable
518	<	*              of TBURST/TB.
618	>	* ssl_cipher_list: list of ciphers that the server we are connecting to
619	>	* must support. If the server is not capable of using any of the ciphers
620	>	* listed below, the connection will simply be rejected.
621	>	* Can be used to enforce stronger ciphers, even though this option
622	>	* is not necessarily required to establish a SSL/TLS connection.
623	>	*
624	>	* Multiple ciphers are separated by colons. The order of preference
625	>	* is from left to right.
626		*/
627	<	#       flags = autoconn, compressed, cryptlink, burst_away, topicburst;
521	<	};
522	<
523	<	connect {
524	<	name = "encrypted.auth.example";
525	<	host = "some.host.somewhere";
526	<	port = 6667;
527	<
528	<	flags = cryptlink;
627	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
628
629		/*
630	<	* rsa_public_key_file: the path to the public keyfile of the server.
631	<	* Used instead of passwords.
630	>	* ssl_certificate_fingerprint: enhances security by additionally checking
631	>	* the server's client certificate fingerprint against the specified
632	>	* fingerprint below.
633		*/
634	<	rsa_public_key_file = "etc/remote.server.keyfile";
634	>	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
635
636		/*
637	<	* cipher preference: set the preferred cipher for this link
638	<	*
639	<	* Available ciphers are:
540	<	*      BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
541	<	*      RC5.12/128 RC5.8/128 3DES/168 DES/56
542	<	*
543	<	* NOTE:  Some ciphers may not be supported by your OpenSSL.
544	<	*        Check the output from 'configure' for available ciphers.
545	<	*
546	<	* NOTE2: To help you decide what cipher to use, tools/encspeed
547	<	*        will show you approximately how fast each cipher is.
548	<	*        However, blowfish is fast and secure, and is probably
549	<	*        a good default for most situations.
550	<	*
551	<	* NOTE3: Default if none is set is BF/128
552	<	*
553	<	* The cipher *MUST* be the same in both directions.  If you
554	<	* set a cipher preference, your uplink must set the same cipher,
555	<	* else it will not link.
637	>	* autoconn   - controls whether we autoconnect to this server or not,
638	>	*              dependent on class limits. By default, this is disabled.
639	>	* ssl        - Initiates a TLS/SSL connection.
640		*/
641	<	#       cipher_preference = "BF/168";
641	>	#       flags = autoconn, ssl;
642		};
643
644	<	/*
645	<	* NOTE: Don't add an extra 'name=' entry if you use
562	<	* the connect "name"{} feature
563	<	*/
564	<	connect "ipv6.some.server" {
644	>	connect {
645	>	name = "ipv6.some.server";
646		host = "3ffd:dead:beef::1";
647		send_password = "password";
648		accept_password = "password";
#	Line 577 | Line 658 | connect "ipv6.some.server" {
658
659		/*
660		* cluster {}:  servers that share klines/unkline/xline/unxline/resv/unresv/locops
661	<	* automatically (OLD hyb6 SLAVE_SERVERS)
661	>	* automatically
662		*/
663		cluster {
664		/*
665	<	* name: the server to share with, this can take wildcards
665	>	* name: the server to share with; this can take wildcards
666		*
667	<	* NOTE: only local actions will be clustered, meaning if
667	>	* NOTE: only local actions will be clustered, meaning that if
668		*       the server receives a shared kline/unkline/etc, it
669		*       will not be propagated to clustered servers.
670		*
671		*       Remote servers are not necessarily required to accept
672	<	*       clustered lines, they need a shared{} for *THIS* server
673	<	*       in order to accept them.
672	>	*       clustered lines, they need a shared {} block for *THIS*
673	>	*       server in order to accept them.
674		*/
675		name = "*.arpa";
676
677		/*
678	<	* type: list of what to share, options are as follows:
679	<	*      kline   - share klines
680	<	*      tkline  - share temporary klines
681	<	*      unkline - share unklines
682	<	*      xline   - share xlines
683	<	*      txline  - share temporary xlines
684	<	*      unxline - share unxlines
685	<	*      resv    - share resvs
686	<	*      tresv   - share temporary resvs
687	<	*      unresv  - share unresvs
688	<	*      locops  - share locops
608	<	*      all     - share all of the above (default)
678	>	* type: list of what to share; options are as follows:
679	>	*      dline   - share dlines
680	>	*      undline - share undlines
681	>	*      kline   - share klines
682	>	*      unkline - share unklines
683	>	*      xline   - share xlines
684	>	*      unxline - share unxlines
685	>	*      resv    - share resvs
686	>	*      unresv  - share unresvs
687	>	*      locops  - share locops
688	>	*      all     - share all of the above (default)
689		*/
690		type = kline, unkline, locops, xline, resv;
691		};
692
693		/*
694	<	* shared {}: users that are allowed to remote kline (OLD U:)
694	>	* shared {}: users that are allowed to remote kline
695		*
696	<	* NOTE: This can be effectively used for remote klines.
696	>	* NOTE: This can effectively be used for remote klines.
697		*       Please note that there is no password authentication
698	<	*       for users setting remote klines.  You must also be
698	>	*       for users setting remote klines. You must also be
699		*       /oper'd in order to issue a remote kline.
700		*/
701		shared {
702		/*
703	<	* name: the server the user must be on to set klines.  If this is not
704	<	* specified, the user will be allowed to kline from all servers.
703	>	* name: the server the user must be connected to in order to set klines.
704	>	* If this is not specified, the user will be allowed to kline from all
705	>	* servers.
706		*/
707		name = "irc2.some.server";
708
709		/*
710	<	* user: the user@host mask that is allowed to set klines.  If this is
710	>	* user: the user@host mask that is allowed to set klines. If this is
711		* not specified, all users on the server above will be allowed to set
712		* a remote kline.
713		*/
#	Line 634 | Line 715 | shared {
715
716		/*
717		* type: list of what to share, options are as follows:
718	<	*      kline   - allow oper/server to kline
719	<	*      tkline  - allow temporary klines
720	<	*      unkline - allow oper/server to unkline
721	<	*      xline   - allow oper/server to xline
722	<	*      txline  - allow temporary xlines
723	<	*      unxline - allow oper/server to unxline
724	<	*      resv    - allow oper/server to resv
725	<	*      tresv   - allow temporary resvs
645	<	*      unresv  - allow oper/server to unresv
718	>	*      dline   - allow oper/server to dline
719	>	*      undline - allow oper/server to undline
720	>	*      kline   - allow oper/server to kline
721	>	*      unkline - allow oper/server to unkline
722	>	*      xline   - allow oper/server to xline
723	>	*      unxline - allow oper/server to unxline
724	>	*      resv    - allow oper/server to resv
725	>	*      unresv  - allow oper/server to unresv
726		*      locops  - allow oper/server to locops - only used for servers that cluster
727	<	*      all     - allow oper/server to do all of the above (default)
727	>	*      all     - allow oper/server to do all of the above (default)
728		*/
729		type = kline, unkline, resv;
730		};
731
732		/*
733	<	* kill {}:  users that are not allowed to connect (OLD K:)
734	<	* Oper issued klines will be added to the specified kline config
733	>	* kill {}:  users that are not allowed to connect
734	>	* Oper issued klines will be added to the specified kline database
735		*/
736		kill {
737		user = "bad@*.hacked.edu";
738		reason = "Obviously hacked account";
739		};
740
661	–	kill {
662	–	user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.org$";
663	–	type = regex;
664	–	};
665	–
741		/*
742	<	* deny {}:  IPs that are not allowed to connect (before DNS/ident lookup)
743	<	* Oper issued dlines will be added to the specified dline config
742	>	* deny {}:  IP addresses that are not allowed to connect
743	>	* (before DNS/ident lookup)
744	>	* Oper issued dlines will be added to the specified dline database
745		*/
746		deny {
747		ip = "10.0.1.0/24";
#	Line 673 | Line 749 | deny {
749		};
750
751		/*
752	<	* exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:)
752	>	* exempt {}:  IP addresses that are exempt from deny {} and Dlines
753		*/
754		exempt {
755		ip = "192.168.0.0/16";
756		};
757
758		/*
759	<	* resv {}:  nicks and channels users may not use/join (OLD Q:)
759	>	* resv {}:  nicks and channels users may not use/join
760		*/
761	<	resv {
762	<	/* reason: the reason for the proceeding resv's */
763	<	reason = "There are no services on this network";
761	>	resv { mask = "clone*"; reason = "Clone bots"; };
762	>	resv { mask = "Global"; reason = "Reserved for services"; };
763	>	resv { mask = "ChanServ"; reason = "Reserved for services"; };
764	>	resv { mask = "NickServ"; reason = "Reserved for services"; };
765	>	resv { mask = "OperServ"; reason = "Reserved for services"; };
766	>	resv { mask = "MemoServ"; reason = "Reserved for services"; };
767	>	resv { mask = "BotServ"; reason = "Reserved for services"; };
768	>	resv { mask = "HelpServ"; reason = "Reserved for services"; };
769	>	resv { mask = "HostServ"; reason = "Reserved for services"; };
770	>	resv { mask = "StatServ"; reason = "Reserved for services"; };
771	>	resv { mask = "#*services*"; reason = "Reserved for services"; };
772
773	<	/* resv: the nicks and channels users may not join/use */
774	<	nick = "nickserv";
775	<	nick = "chanserv";
776	<	channel = "#services";
773	>	resv {
774	>	/*
775	>	* mask: masks starting with a '#' are automatically considered
776	>	* as channel name masks.
777	>	*/
778	>	mask = "#helsinki";
779	>	reason = "Channel is reserved for Finnish inhabitants";
780
781	<	/* resv: wildcard masks are also supported in nicks only */
782	<	reason = "Clone bots";
783	<	nick = "clone*";
781	>	/*
782	>	* exempt: can be either a ISO 3166 alpha-2 two letter country
783	>	* code, or a nick!user@host mask. CIDR is supported. Exempt
784	>	* entries can be stacked.
785	>	*/
786	>	exempt = "FI";
787		};
788
789		/*
790	<	* gecos {}:  The X: replacement, used for banning users based on
701	<	* their "realname".
790	>	* gecos {}:  used for banning users based on their "realname".
791		*/
792		gecos {
793		name = "*sex*";
#	Line 710 | Line 799 | gecos {
799		reason = "Trojan drone";
800		};
801
713	–	gecos {
714	–	name = "*http*";
715	–	reason = "Spambot";
716	–	};
717	–
718	–	gecos {
719	–	name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
720	–	type = regex;
721	–	};
722	–
802		/*
803	<	* channel {}:  The channel block contains options pertaining to channels
803	>	* channel {}:  the channel block contains options pertaining to channels
804		*/
805		channel {
806		/*
807		* disable_fake_channels: this option, if set to 'yes', will
808	<	* disallow clients to create or join channels that have one
808	>	* disallow clients from creating or joining channels that have one
809		* of the following ASCII characters in their name:
810		*
811		*   2 | bold
812		*   3 | mirc color
813	<	*  15 | plain text
813	>	*  15 | plain text
814		*  22 | reverse
815	+	*  29 | italic
816		*  31 | underline
817		* 160 | non-breaking space
818		*/
819		disable_fake_channels = yes;
820
821		/*
822	<	* restrict_channels: reverse channel RESVs logic, only reserved
823	<	* channels are allowed
744	<	*/
745	<	restrict_channels = no;
746	<
747	<	/*
748	<	* disable_local_channels: prevent users from joining &channels.
749	<	*/
750	<	disable_local_channels = no;
751	<
752	<	/*
753	<	* use_invex: Enable/disable channel mode +I, a n!u@h list of masks
754	<	* that can join a +i channel without an invite.
822	>	* invite_client_count, invite_client_time: how many INVITE commands
823	>	* are permitted per client per invite_client_time.
824		*/
825	<	use_invex = yes;
825	>	invite_client_count = 10;
826	>	invite_client_time = 5 minutes;
827
828		/*
829	<	* use_except: Enable/disable channel mode +e, a n!u@h list of masks
830	<	* that can join a channel through a ban (+b).
829	>	* knock_client_count, knock_client_time: how many KNOCK commands
830	>	* are permitted per client per knock_client_time.
831		*/
832	<	use_except = yes;
832	>	knock_client_count = 1;
833	>	knock_client_time = 5 minutes;
834
835		/*
836	<	* use_knock: Allows users to request an invite to a channel that
837	<	* is locked somehow (+ikl).  If the channel is +p or you are banned
767	<	* the knock will not be sent.
768	<	*/
769	<	use_knock = yes;
770	<
771	<	/*
772	<	* knock_delay: The amount of time a user must wait between issuing
773	<	* the knock command.
774	<	*/
775	<	knock_delay = 1 minutes;
776	<
777	<	/*
778	<	* knock_delay_channel: How often a knock to any specific channel
779	<	* is permitted, regardless of the user sending the knock.
836	>	* knock_delay_channel: how often a KNOCK to any specific channel
837	>	* is permitted, regardless of the user sending the KNOCK.
838		*/
839		knock_delay_channel = 1 minute;
840
841		/*
842	<	* burst_topicwho: enable sending of who set topic on topicburst
843	<	* default is yes
842	>	* max_channels: the maximum number of channels a user can join/be on.
843	>	* This is a default value which can be overriden with class {} blocks.
844		*/
845	<	burst_topicwho = yes;
788	<
789	<	/*
790	<	* max_chans_per_user: The maximum number of channels a user can
791	<	* join/be on.
792	<	*/
793	<	max_chans_per_user = 25;
794	<
795	<	/* quiet_on_ban: stop banned people talking in channels. */
796	<	quiet_on_ban = yes;
845	>	max_channels = 25;
846
847		/* max_bans: maximum number of +b/e/I modes in a channel */
848	<	max_bans = 25;
848	>	max_bans = 100;
849
850		/*
851	<	* how many joins in how many seconds constitute a flood, use 0 to
851	>	* how many joins in how many seconds constitute a flood. Use 0 to
852		* disable. +b opers will be notified (changeable via /set)
853		*/
854		join_flood_count = 16;
855		join_flood_time = 8 seconds;
856
857		/*
858	<	* splitcode: The ircd will now check splitmode every few seconds.
858	>	* The ircd will now check splitmode (whether a server is split from
859	>	* the network) every few seconds; this functionality is known as
860	>	* splitcode and is influenced by the options below.
861		*
862		* Either split users or split servers can activate splitmode, but
863		* both conditions must be met for the ircd to deactivate splitmode.
864	<	*
864	>	*
865		* You may force splitmode to be permanent by /quote set splitmode on
866		*/
867
868		/*
869		* default_split_user_count: when the usercount is lower than this level,
870	<	* consider ourselves split.  This must be set for automatic splitmode.
870	>	* consider ourselves split. This must be set for automatic splitmode.
871		*/
872		default_split_user_count = 0;
873
874		/*
875		* default_split_server_count: when the servercount is lower than this,
876	<	* consider ourselves split.  This must be set for automatic splitmode.
876	>	* consider ourselves split. This must be set for automatic splitmode.
877		*/
878		default_split_server_count = 0;
879
880	<	/* split no create: disallow users creating channels on split. */
880	>	/* no_create_on_split: do not allow users to create channels on split. */
881		no_create_on_split = yes;
882
883	<	/* split: no join: disallow users joining channels at all on a split */
883	>	/* no_join_on_split: do not allow users to join channels on a split. */
884		no_join_on_split = no;
885		};
886
887		/*
888	<	* serverhide {}:  The serverhide block contains the options regarding
889	<	* serverhiding
888	>	* serverhide {}:  the serverhide block contains the options regarding
889	>	* to server hiding. For more information regarding server hiding,
890	>	* please see doc/serverhide.txt
891		*/
892		serverhide {
893		/*
894	+	* disable_remote_commands: disable users issuing commands
895	+	* on remote servers.
896	+	*/
897	+	disable_remote_commands = no;
898	+
899	+	/*
900		* flatten_links: this option will show all servers in /links appear
901	<	* that they are linked to this current server
901	>	* as though they are linked to this current server.
902		*/
903		flatten_links = no;
904
#	Line 852 | Line 910 | serverhide {
910
911		/*
912		* hidden: hide this server from a /links output on servers that
913	<	* support it.  This allows hub servers to be hidden etc.
913	>	* support it. This allows hub servers to be hidden etc.
914		*/
915		hidden = no;
916
917		/*
860	–	* disable_hidden: prevent servers hiding themselves from a
861	–	* /links output.
862	–	*/
863	–	disable_hidden = no;
864	–
865	–	/*
918		* hide_servers: hide remote servernames everywhere and instead use
919		* hidden_name and network_desc.
920		*/
921		hide_servers = no;
922
923		/*
924	<	* Use this as the servername users see if hide_servers = yes.
924	>	* hide_services: define this if you want to hide the location of
925	>	* services servers that are specified in the service {} block.
926	>	*/
927	>	hide_services = no;
928	>
929	>	/*
930	>	* hidden_name: use this as the servername users see if hide_servers = yes.
931		*/
932		hidden_name = "*.hidden.com";
933
934		/*
935	<	* hide_server_ips: If this is disabled, opers will be unable to see servers
936	<	* ips and will be shown a masked ip, admins will be shown the real ip.
937	<	*
938	<	* If this is enabled, nobody can see a servers ip.  *This is a kludge*, it
939	<	* has the side effect of hiding the ips everywhere, including logfiles.
935	>	* hide_server_ips: if this is disabled, opers will be unable to see
936	>	* servers' IP addresses and will be shown a masked IP address; admins
937	>	* will be shown the real IP address.
938	>	*
939	>	* If this is enabled, nobody can see a server's IP address.
940	>	* *This is a kludge*: it has the side effect of hiding the IP addresses
941	>	* everywhere, including logfiles.
942		*
943		* We recommend you leave this disabled, and just take care with who you
944	<	* give admin=yes; to.
944	>	* give administrator privileges to.
945		*/
946		hide_server_ips = no;
947		};
948
949		/*
950	<	* general {}:  The general block contains many of the options that were once
951	<	* compiled in options in config.h.  The general block is read at start time.
950	>	* general {}:  the general block contains many of the options that were once
951	>	* compiled in options in config.h
952		*/
953		general {
954	<	/* max_watch: maximum WATCH entries */
955	<	max_watch = 64;
954	>	/*
955	>	* cycle_on_host_change: sends a fake QUIT/JOIN combination
956	>	* when services change the hostname of a specific client.
957	>	*/
958	>	cycle_on_host_change = yes;
959	>
960	>	/* services_name: servername of nick/channel services. */
961	>	services_name = "service.someserver";
962	>
963	>	/* max_watch: maximum WATCH entries a client can have. */
964	>	max_watch = 30;
965	>
966	>	/* max_accept: maximum allowed /accept's for +g usermode. */
967	>	max_accept = 30;
968	>
969	>	/* gline_enable: enable glines (network-wide temporary klines). */
970	>	gline_enable = yes;
971
972		/*
973	<	* gline_min_cidr: the minimum required length of a CIDR bitmask
974	<	* for IPv4 based glines
973	>	* gline_duration: the amount of time a G-line will remain on your
974	>	* server before expiring.
975		*/
976	<	gline_min_cidr = 16;
976	>	gline_duration = 1 day;
977
978		/*
979	<	* gline_min_cidr6: the minimum required length of a CIDR bitmask
980	<	* for IPv6 based glines
979	>	* gline_request_duration: how long a pending G-line can be around.
980	>	* 10 minutes should be plenty.
981		*/
982	<	gline_min_cidr6 = 48;
982	>	gline_request_duration = 10 minutes;
983
984		/*
985	<	* Whether to automatically set mode +i on connecting users.
985	>	* gline_min_cidr: the minimum required length of a CIDR bitmask
986	>	* for IPv4 based G-lines.
987		*/
988	<	invisible_on_connect = yes;
988	>	gline_min_cidr = 16;
989
990		/*
991	<	* If you don't explicitly specify burst_away in your connect blocks, then
992	<	* they will default to the burst_away value below.
991	>	* gline_min_cidr6: the minimum required length of a CIDR bitmask
992	>	* for IPv6 based G-lines.
993		*/
994	<	burst_away = no;
994	>	gline_min_cidr6 = 48;
995
996		/*
997	<	* Show "actually using host <ip>" on /whois when possible.
997	>	* invisible_on_connect: whether to automatically set mode +i on
998	>	* connecting users.
999		*/
1000	<	use_whois_actually = yes;
1000	>	invisible_on_connect = yes;
1001
1002		/*
1003	<	* Max time from the nickname change that still causes KILL
1004	<	* automatically to switch for the current nick of that user. (seconds)
1003	>	* kill_chase_time_limit: KILL chasing is a feature whereby a KILL
1004	>	* issued for a user who has recently changed nickname will be applied
1005	>	* automatically to the new nick. kill_chase_time_limit is the maximum
1006	>	* time following a nickname change that this chasing will apply.
1007		*/
1008	<	kill_chase_time_limit = 90;
1008	>	kill_chase_time_limit = 30 seconds;
1009
1010		/*
1011	<	* If hide_spoof_ips is disabled, opers will be allowed to see the real IP of spoofed
1012	<	* users in /trace etc.  If this is defined they will be shown a masked IP.
1011	>	* hide_spoof_ips: if disabled, opers will be allowed to see the real
1012	>	* IP address of spoofed users in /trace etc. If this is defined they
1013	>	* will be shown a masked IP.
1014		*/
1015		hide_spoof_ips = yes;
1016
1017		/*
1018	<	* Ignore bogus timestamps from other servers.  Yes, this will desync
1019	<	* the network, but it will allow chanops to resync with a valid non TS 0
1018	>	* ignore_bogus_ts: ignore bogus timestamps from other servers.
1019	>	* Yes, this will desync the network, but it will allow chanops
1020	>	* to resync with a valid non TS 0.
1021		*
1022		* This should be enabled network wide, or not at all.
1023		*/
#	Line 948 | Line 1029 | general {
1029		*/
1030		disable_auth = no;
1031
951	–	/* disable_remote_commands: disable users doing commands on remote servers */
952	–	disable_remote_commands = no;
953	–
1032		/*
1033		* tkline_expire_notices: enables or disables temporary kline/xline
1034		* expire notices.
#	Line 959 | Line 1037 | general {
1037
1038		/*
1039		* default_floodcount: the default value of floodcount that is configurable
1040	<	* via /quote set floodcount.  This is the amount of lines a user
1041	<	* may send to any other user/channel in one second.
1040	>	* via /quote set floodcount. This is the number of lines a user may send
1041	>	* to any other user/channel in one second.
1042		*/
1043		default_floodcount = 10;
1044
1045		/*
1046	<	* failed_oper_notice: send a notice to all opers on the server when
1046	>	* failed_oper_notice: send a notice to all opers on the server when
1047		* someone tries to OPER and uses the wrong password, host or ident.
1048		*/
1049		failed_oper_notice = yes;
1050
1051		/*
1052	<	* dots_in_ident: the amount of '.' characters permitted in an ident
1052	>	* dots_in_ident: the number of '.' characters permitted in an ident
1053		* reply before the user is rejected.
1054		*/
1055		dots_in_ident = 2;
1056
1057		/*
1058	<	* dot_in_ip6_addr: ircd-hybrid-6.0 and earlier will disallow hosts
1059	<	* without a '.' in them.  This will add one to the end.  Only needed
1060	<	* for older servers.
1061	<	*/
984	<	dot_in_ip6_addr = no;
985	<
986	<	/*
987	<	* min_nonwildcard: the minimum non wildcard characters in k/d/g lines
988	<	* placed via the server.  klines hand placed are exempt from limits.
989	<	* wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1058	>	* min_nonwildcard: the minimum number of non-wildcard characters in
1059	>	* k/d/g lines placed via the server. K-lines hand-placed are exempt from
1060	>	* this limit.
1061	>	* Wildcard characters: '.', ':', '*', '?', '@', '!'
1062		*/
1063		min_nonwildcard = 4;
1064
1065		/*
1066	<	* min_nonwildcard_simple: the minimum non wildcard characters in
1067	<	* gecos bans.  wildcard chars: '*' '?' '#'
1066	>	* min_nonwildcard_simple: the minimum number of non-wildcard characters
1067	>	* in gecos bans. Wildcard characters: '*', '?'
1068		*/
1069		min_nonwildcard_simple = 3;
1070
1071	<	/* max_accept: maximum allowed /accept's for +g usermode */
1000	<	max_accept = 20;
1001	<
1002	<	/* anti_nick_flood: enable the nickflood control code */
1071	>	/* anti_nick_flood: enable the nickflood control code. */
1072		anti_nick_flood = yes;
1073
1074	<	/* nick flood: the nick changes allowed in the specified period */
1074	>	/* nick flood: the number of nick changes allowed in the specified period. */
1075		max_nick_time = 20 seconds;
1076		max_nick_changes = 5;
1077
1078		/*
1079	<	* anti_spam_exit_message_time: the minimum time a user must be connected
1080	<	* before custom quit messages are allowed.
1079	>	* away_count, away_time: how many AWAY command are permitted per
1080	>	* client per away_time.
1081		*/
1082	<	anti_spam_exit_message_time = 5 minutes;
1082	>	away_count = 2;
1083	>	away_time = 10 seconds;
1084
1085		/*
1086	<	* ts delta: the time delta allowed between server clocks before
1087	<	* a warning is given, or before the link is dropped.  all servers
1018	<	* should run ntpdate/rdate to keep clocks in sync
1019	<	*/
1020	<	ts_warn_delta = 30 seconds;
1021	<	ts_max_delta = 5 minutes;
1022	<
1023	<	/*
1024	<	* kline_with_reason: show the user the reason why they are k/d/glined
1025	<	* on exit.  May give away who set k/dline when set via tcm.
1026	<	*/
1027	<	kline_with_reason = yes;
1028	<
1029	<	/*
1030	<	* kline_reason: show this message to users on channel
1031	<	* instead of the oper reason.
1086	>	* anti_spam_exit_message_time: the minimum time a user must be connected
1087	>	* before custom quit messages are allowed.
1088		*/
1089	<	kline_reason = "Connection closed";
1089	>	anti_spam_exit_message_time = 5 minutes;
1090
1091		/*
1092	<	* reject_hold_time: wait this amount of time before disconnecting
1093	<	* a rejected client. Use 0 to disable.
1092	>	* ts_warn_delta, ts_max_delta: the time delta allowed between server
1093	>	* clocks before a warning is given, or before the link is dropped.
1094	>	* All servers should run ntpdate/rdate to keep clocks in sync.
1095		*/
1096	<	reject_hold_time = 0;
1096	>	ts_warn_delta = 3 seconds;
1097	>	ts_max_delta = 15 seconds;
1098
1099		/*
1100	<	* warn_no_nline: warn opers about servers that try to connect but
1101	<	* we don't have a connect {} block for.  Twits with misconfigured
1102	<	* servers can get really annoying with this enabled.
1100	>	* warn_no_connect_block: warn opers about servers that try to connect
1101	>	* but for which we don't have a connect {} block. Twits with
1102	>	* misconfigured servers can become really annoying with this enabled.
1103		*/
1104	<	warn_no_nline = yes;
1104	>	warn_no_connect_block = yes;
1105
1106		/*
1107		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1108	<	* operators and administrators.  Doing so is a good idea in case
1109	<	* there are any exempted (exempt{}) server IPs you don't want to
1108	>	* operators and administrators. Doing so is a good idea in case
1109	>	* there are any exempted (exempt {}) server IPs you don't want to
1110		* see leaked.
1111		*/
1112		stats_e_disabled = no;
1113
1114	<	/* stats_o_oper only: make stats o (opers) oper only */
1114	>	/* stats_o_oper_only: make stats o (opers) oper only. */
1115		stats_o_oper_only = yes;
1116
1117	<	/* stats_P_oper_only: make stats P (ports) oper only */
1117	>	/* stats_P_oper_only: make stats P (ports) oper only. */
1118		stats_P_oper_only = yes;
1119
1120	+	/* stats_u_oper_only: make stats u (uptime) oper only. */
1121	+	stats_u_oper_only = no;
1122	+
1123		/*
1124	<	* stats i oper only: make stats i (auth {}) oper only. set to:
1125	<	*     yes:    show users no auth blocks, made oper only.
1126	<	*     masked: show users first matching auth block
1127	<	*     no:     show users all auth blocks.
1124	>	* stats_i_oper_only: make stats i (auth {}) oper only. Set to:
1125	>	*     yes    - show users no auth {} blocks, made oper only
1126	>	*     masked - show users the first matching auth {} block
1127	>	*     no     - show users all auth {} blocks
1128		*/
1129		stats_i_oper_only = yes;
1130
1131		/*
1132	<	* stats_k_oper_only: make stats k/K (klines) oper only.  set to:
1133	<	*     yes:    show users no auth blocks, made oper only
1134	<	*     masked: show users first matching auth block
1135	<	*     no:     show users all auth blocks.
1132	>	* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1133	>	*     yes    - show users no auth {} blocks, made oper only
1134	>	*     masked - show users the first matching auth {} block
1135	>	*     no     - show users all auth {} blocks
1136		*/
1137		stats_k_oper_only = yes;
1138
#	Line 1088 | Line 1149 | general {
1149		opers_bypass_callerid = no;
1150
1151		/*
1152	<	* pace_wait_simple: time between use of less intensive commands
1153	<	* (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1152	>	* pace_wait_simple: minimum time required between use of less
1153	>	* intensive commands
1154	>	* (ADMIN, HELP, LUSERS, VERSION, remote WHOIS)
1155		*/
1156		pace_wait_simple = 1 second;
1157
1158		/*
1159	<	* pace_wait: time between more intensive commands
1160	<	* (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1159	>	* pace_wait: minimum time required between use of more intensive commands
1160	>	* (INFO, LINKS, MAP, MOTD, STATS, WHO, WHOWAS)
1161		*/
1162		pace_wait = 10 seconds;
1163
1164		/*
1165	<	* short_motd: send clients a notice telling them to read the motd
1166	<	* instead of forcing a motd to clients who may simply ignore it.
1165	>	* short_motd: send clients a notice telling them to read the MOTD
1166	>	* instead of forcing an MOTD to clients who may simply ignore it.
1167		*/
1168		short_motd = no;
1169
1170		/*
1171	<	* ping_cookie: require clients to respond exactly to a ping command,
1171	>	* ping_cookie: require clients to respond exactly to a PING command,
1172		* can help block certain types of drones and FTP PASV mode spoofing.
1173		*/
1174		ping_cookie = no;
#	Line 1116 | Line 1178 | general {
1178
1179		/*
1180		* true_no_oper_flood: completely eliminate flood limits for opers
1181	<	* and for clients with can_flood = yes in their auth {} blocks
1181	>	* and for clients with 'can_flood' in their auth {} blocks.
1182		*/
1183		true_no_oper_flood = yes;
1184
1185	<	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1185	>	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1186		oper_pass_resv = yes;
1187
1188	<	/*
1127	<	* idletime: the maximum amount of time a user may idle before
1128	<	* they are disconnected
1129	<	*/
1130	<	idletime = 0;
1131	<
1132	<	/* REMOVE ME.  The following line checks you've been reading. */
1188	>	/* REMOVE ME. The following line checks that you have been reading. */
1189		havent_read_conf = 1;
1190
1191		/*
1192	<	* max_targets: the maximum amount of targets in a single
1193	<	* PRIVMSG/NOTICE.  Set to 999 NOT 0 for unlimited.
1192	>	* max_targets: the maximum number of targets in a single
1193	>	* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1194		*/
1195		max_targets = 4;
1196
1197		/*
1142	–	* client_flood: maximum amount of data in a clients queue before
1143	–	* they are dropped for flooding.
1144	–	*/
1145	–	client_flood = 2560 bytes;
1146	–
1147	–	/*
1148	–	* message_locale: the default message locale
1149	–	* Use "standard" for the compiled in defaults.
1150	–	* To install the translated messages, go into messages/ in the
1151	–	* source directory and run `make install'.
1152	–	*/
1153	–	message_locale = "standard";
1154	–
1155	–	/*
1198		* usermodes configurable: a list of usermodes for the options below
1199		*
1200		* +b - bots         - See bot and drone flooding notices
1201		* +c - cconn        - Client connection/quit notices
1202		* +D - deaf         - Don't receive channel messages
1203		* +d - debug        - See debugging notices
1204	<	* +f - full         - See I: line full notices
1204	>	* +e - external     - See remote server connection and split notices
1205	>	* +F - farconnect   - Remote client connection/quit notices
1206	>	* +f - full         - See auth {} block full notices
1207		* +G - softcallerid - Server Side Ignore for users not on your channels
1208		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1209	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
1210	<	*                     a channel
1209	>	* +H - hidden       - Hides operator status to other users
1210	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
1211	>	* +j - rej          - See rejected client notices
1212		* +k - skill        - See server generated KILL messages
1213		* +l - locops       - See LOCOPS messages
1214		* +n - nchange      - See client nick changes
1215	<	* +r - rej          - See rejected client notices
1215	>	* +p - hidechans    - Hides channel list in WHOIS
1216	>	* +q - hideidle     - Hides idle and signon time in WHOIS
1217	>	* +R - nononreg     - Only receive private messages from registered clients
1218		* +s - servnotice   - See general server notices
1219		* +u - unauth       - See unauthorized client notices
1220		* +w - wallop       - See server generated WALLOPS
1174	–	* +x - external     - See remote server connection and split notices
1221		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1176	–	* +z - operwall     - See oper generated WALLOPS
1177	–	*/
1178	–
1179	–	/* oper_only_umodes: usermodes only opers may set */
1180	–	oper_only_umodes = bots, cconn, cconn_full, debug, full, skill,
1181	–	nchange, rej, spy, external, operwall,
1182	–	locops, unauth;
1183	–
1184	–	/* oper_umodes: default usermodes opers get when they /oper */
1185	–	oper_umodes = bots, locops, servnotice, operwall, wallop;
1186	–
1187	–	/*
1188	–	* servlink_path: path to 'servlink' program used by ircd to handle
1189	–	* encrypted/compressed server <-> server links.
1190	–	*
1191	–	* only define if servlink is not in same directory as ircd itself.
1222		*/
1193	–	#servlink_path = "/usr/local/ircd/bin/servlink";
1223
1224	<	/*
1225	<	* default_cipher_preference: default cipher to use for cryptlink when none is
1226	<	* specified in connect block.
1198	<	*/
1199	<	#default_cipher_preference = "BF/168";
1224	>	/* oper_only_umodes: usermodes only operators may set. */
1225	>	oper_only_umodes = bots, cconn, debug, external, farconnect, full, hidden, locops,
1226	>	nchange, rej, skill, spy, unauth;
1227
1228	<	/*
1229	<	* use_egd: if your system does not have *random devices yet you
1203	<	* want to use OpenSSL and encrypted links, enable this.  Beware -
1204	<	* EGD is *very* CPU intensive when gathering data for its pool
1205	<	*/
1206	<	#       use_egd = yes;
1228	>	/* oper_umodes: default usermodes operators get when they /oper or /challenge. */
1229	>	oper_umodes = bots, locops, servnotice, wallop;
1230
1231		/*
1232	<	* egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1233	<	* which automatically finds the path.
1232	>	* throttle_count: the maximum number of connections from the same
1233	>	* IP address allowed in throttle_time duration.
1234		*/
1235	<	#       egdpool_path = "/var/run/egd-pool";
1213	<
1235	>	throttle_count = 1;
1236
1237		/*
1238	<	* compression_level: level of compression for compressed links between
1239	<	* servers.
1240	<	*
1241	<	* values are between: 1 (least compression, fastest)
1220	<	*                and: 9 (most compression, slowest).
1221	<	*/
1222	<	#       compression_level = 6;
1223	<
1224	<	/*
1225	<	* throttle_time: the minimum amount of time between connections from
1226	<	* the same ip.  exempt {} blocks are excluded from this throttling.
1227	<	* Offers protection against flooders who reconnect quickly.
1238	>	* throttle_time: the minimum amount of time required between
1239	>	* connections from the same IP address. exempt {} blocks are
1240	>	* excluded from this throttling.
1241	>	* Offers protection against flooders who reconnect quickly.
1242		* Set to 0 to disable.
1243		*/
1244	<	throttle_time = 10;
1244	>	throttle_time = 2 seconds;
1245		};
1246
1247	<	glines {
1234	<	/* enable: enable glines, network wide temp klines */
1235	<	enable = yes;
1236	<
1237	<	/*
1238	<	* duration: the amount of time a gline will remain on your
1239	<	* server before expiring
1240	<	*/
1241	<	duration = 1 day;
1242	<
1243	<	/*
1244	<	* logging: which types of rules you want to log when triggered
1245	<	* (choose reject or block)
1246	<	*/
1247	<	logging = reject, block;
1248	<
1247	>	modules {
1248		/*
1249	<	* NOTE: gline ACLs can cause a desync of glines throughout the
1250	<	* network, meaning some servers may have a gline triggered, and
1252	<	* others may not. Also, you only need insert rules for glines
1253	<	* that you want to block and/or reject. If you want to accept and
1254	<	* propagate the gline, do NOT put a rule for it.
1249	>	* path: other paths to search for modules specified below
1250	>	* and in "/module load".
1251		*/
1252	+	path = "lib/ircd-hybrid/modules";
1253	+	path = "lib/ircd-hybrid/modules/autoload";
1254
1255	<	/* user@host for rule to apply to */
1256	<	user = "god@I.still.hate.packets";
1259	<	/* server for rule to apply to */
1260	<	name = "hades.arpa";
1261	<
1262	<	/*
1263	<	* action: action to take when a matching gline is found. options are:
1264	<	*  reject      - do not apply the gline locally
1265	<	*  block       - do not propagate the gline
1266	<	*/
1267	<	action = reject, block;
1268	<
1269	<	user = "god@*";
1270	<	name = "*";
1271	<	action = block;
1255	>	/* module: the name of a module to load on startup/rehash. */
1256	>	#       module = "some_module.la";
1257		};
1258
1259	<	modules {
1260	<	/*
1261	<	* module path: other paths to search for modules specified below
1262	<	* and in /modload.
1263	<	*/
1264	<	path = "@datadir@/modules";
1280	<	path = "@datadir@/autoload";
1259	>	/*
1260	>	* log {}:  contains information about logfiles.
1261	>	*/
1262	>	log {
1263	>	/* Do you want to enable logging to ircd.log? */
1264	>	use_logging = yes;
1265
1266	<	/* module: the name of a module to load on startup/rehash */
1267	<	#module = "some_module.so";
1266	>	file {
1267	>	type = oper;
1268	>	name = "var/log/oper.log";
1269	>	size = unlimited;
1270	>	};
1271	>
1272	>	file {
1273	>	type = user;
1274	>	name = "var/log/user.log";
1275	>	size = 50 megabytes;
1276	>	};
1277	>
1278	>	file {
1279	>	type = kill;
1280	>	name = "var/log/kill.log";
1281	>	size = 50 megabytes;
1282	>	};
1283	>
1284	>	file {
1285	>	type = kline;
1286	>	name = "var/log/kline.log";
1287	>	size = 50 megabytes;
1288	>	};
1289	>
1290	>	file {
1291	>	type = dline;
1292	>	name = "var/log/dline.log";
1293	>	size = 50 megabytes;
1294	>	};
1295	>
1296	>	file {
1297	>	type = gline;
1298	>	name = "var/log/gline.log";
1299	>	size = 50 megabytes;
1300	>	};
1301	>
1302	>	file {
1303	>	type = xline;
1304	>	name = "var/log/xline.log";
1305	>	size = 50 megabytes;
1306	>	};
1307	>
1308	>	file {
1309	>	type = resv;
1310	>	name = "var/log/resv.log";
1311	>	size = 50 megabytes;
1312	>	};
1313	>
1314	>	file {
1315	>	type = debug;
1316	>	name = "var/log/debug.log";
1317	>	size = 50 megabytes;
1318	>	};
1319		};

Comparing:
ircd-hybrid-7.2/etc/example.conf.in (property svn:keywords), Revision 897 by db, Sat Nov 3 17:13:32 2007 UTC vs.
ircd-hybrid/trunk/doc/reference.conf (property svn:keywords), Revision 4494 by michael, Sat Aug 16 18:08:45 2014 UTC

#	Line 1 | Line 1
1	<	"Author Date Id Revision"
1	>	Id Revision

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)