ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/doc/reference.conf

Comparing:
ircd-hybrid-7.2/etc/example.conf.in (file contents), Revision 897 by db, Sat Nov 3 17:13:32 2007 UTC vs.
ircd-hybrid/trunk/doc/reference.conf (file contents), Revision 4436 by michael, Thu Aug 7 20:42:37 2014 UTC

#	Line 1 | Line 1
1	<	/* doc/example.conf - ircd-hybrid-7 Example configuration file
2	<	* Copyright (C) 2000-2006 Hybrid Development Team
1	>	/*
2	>	* This is an example configuration file for ircd-hybrid
3		*
4	<	* Written by ejb, wcampbel, db, leeh and others
5	<	* Other example configurations can be found in the source dir under
6	<	* etc/.
4	>	* Copyright (c) 2000-2014 ircd-hybrid development team
5		*
6		* $Id$
7		*/
8
9	<	/* IMPORTANT NOTES:
9	>	/*
10	>	* ########################################################################
11	>	* IMPORTANT NOTE:
12		*
13	<	* auth {} blocks MUST be specified in order of precedence.  The first one
14	<	* that matches a user will be used.  So place spoofs first, then specials,
13	>	* auth {} blocks MUST be specified in order of precedence. The first one
14	>	* that matches a user will be used. So place spoofs first, then specials,
15		* then general access.
16	+	* ########################################################################
17		*
18		* Shell style (#), C++ style (//) and C style comments are supported.
19		*
#	Line 22 | Line 23
23		*
24		* Times/durations are written as:
25		*        12 hours 30 minutes 1 second
26	<	*
26	>	*
27		* Valid units of time:
28	<	*        month, week, day, hour, minute, second
28	>	*        year, month, week, day, hour, minute, second
29		*
30		* Valid units of size:
31		*        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
32		*
33	<	* Sizes and times may be singular or plural.
33	<	*/
34	<
35	<	/* EFNET NOTE:
36	<	*
37	<	* This config file is NOT suitable for EFNet.  EFNet admins should use
38	<	* example.efnet.conf
33	>	* Sizes and times may be singular or plural.
34		*/
35	<
35	>
36	>
37		/*
38	<	* serverinfo {}:  contains information about the server. (OLD M:)
38	>	* serverinfo {}:  contains information about the server
39		*/
40		serverinfo {
41		/*
42	<	* name: the name of our server.  This cannot be changed at runtime.
42	>	* name: the name of this server. This cannot be changed at runtime.
43		*/
44		name = "hades.arpa";
45
46		/*
47	<	* sid: a server's unique ID.  This is three characters long and must
48	<	* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
47	>	* sid: a server's unique ID. This is three characters long and must
48	>	* be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	<	* NOTE: The letters must be capitalized.  This cannot be changed at runtime.
50	>	*
51	>	* NOTE: The letters must be capitalized. This cannot be changed at runtime.
52		*/
53	<	sid = "_CHANGE_ME_";
53	>	sid = "0HY";
54
55		/*
56	<	* description: the description of the server.  '[' and ']' may not
60	<	* be used here for compatibility with older servers.
56	>	* description: the description of the server.
57		*/
58	<	description = "hybrid-7 test server";
58	>	description = "ircd-hybrid test server";
59
60		/*
61		* network info: the name and description of the network this server
62	<	* is on.  Shown in the 005 reply and used with serverhiding.
62	>	* is on. Shown in the 005 reply and used with serverhiding.
63		*/
64		network_name = "MyNet";
65		network_desc = "This is My Network";
#	Line 76 | Line 72 | serverinfo {
72
73		/*
74		* vhost: the IP to bind to when we connect outward to ipv4 servers.
75	<	* This should be an ipv4 IP only, or "* for INADDR_ANY.
75	>	* This should be an ipv4 IP only, or "*" for INADDR_ANY.
76		*/
77	<	#vhost = "192.169.0.1";
77	>	#       vhost = "192.169.0.1";
78
79		/*
80	<	* vhost6: the IP to bind to when we connect outward to ipv6 servers.
81	<	* This should be an ipv6 IP only, or "* for INADDR_ANY.
80	>	* vhost6: the address to bind to when we make outgoing connections
81	>	* to IPv6 servers. This should be an IPv6 address, or "*" for INADDR_ANY.
82		*/
83	<	#vhost6 = "3ffe:80e8:546::2";
83	>	#       vhost6 = "3ffe:80e8:546::2";
84
85	<	/* max_clients: the maximum number of clients allowed to connect */
85	>	/* max_clients: the maximum number of clients allowed to connect. */
86		max_clients = 512;
87
88		/*
89	<	* rsa key: the path to the file containing our rsa key for cryptlink.
89	>	* max_nick_length: only applies to local clients. Must be in the
90	>	* range of 9 to 30. Default is 9 if nothing else is specified.
91	>	*/
92	>	max_nick_length = 9;
93	>
94	>	/*
95	>	* max_topic_length: only applies to topics set by local clients.
96	>	* Must be in the range of 80 to 300. Default is 80 if nothing
97	>	* else is specified.
98	>	*/
99	>	max_topic_length = 160;
100	>
101	>	/*
102	>	* rsa_private_key_file: the path to the file containing the
103	>	* RSA key.
104		*
105	<	* Example command to store a 2048 bit RSA keypair in
106	<	* rsa.key, and the public key in rsa.pub:
107	<	*
108	<	*      openssl genrsa -out rsa.key 2048
99	<	*      openssl rsa -in rsa.key -pubout -out rsa.pub
100	<	*      chown <ircd-user>.<ircd.group> rsa.key rsa.pub
105	>	* Example commands to store a 2048 bit RSA key in rsa.key:
106	>	*
107	>	*      openssl genrsa -out rsa.key 2048
108	>	*      chown <ircd-user>.<ircd.group> rsa.key
109		*      chmod 0600 rsa.key
102	–	*      chmod 0644 rsa.pub
110		*/
111	<	#rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
111	>	#       rsa_private_key_file = "etc/rsa.key";
112
113		/*
114	<	* ssl certificate: the path to the file containing our ssl certificate
115	<	* for encrypted client connection.
114	>	* ssl_certificate_file: the path to the file containing our
115	>	* SSL certificate for encrypted client connection.
116		*
117		* This assumes your private RSA key is stored in rsa.key. You
118	<	* MUST have an RSA key in order to generate the certificate
118	>	* MUST have an RSA key in order to generate the certificate.
119	>	*
120	>	* Example command:
121		*
122		*      openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
123		*
#	Line 121 | Line 130 | serverinfo {
130		*      Common Name: irc.someirc.net
131		*      E-mail: you@domain.com
132		*/
133	<	#ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
125	<	};
133	>	#       ssl_certificate_file = "etc/cert.pem";
134
135	<	/*
136	<	* admin {}:  contains admin information about the server. (OLD A:)
137	<	*/
138	<	admin {
139	<	name = "Smurf target";
140	<	description = "Main Server Administrator";
141	<	email = "<syn@packets.r.us>";
142	<	};
135	>	/*
136	>	* ssl_dh_param_file: path to the PEM encoded Diffie-Hellman
137	>	* parameter file. DH parameters are required when using
138	>	* ciphers with EDH (ephemeral Diffie-Hellman) key exchange.
139	>	*
140	>	* A DH parameter file can be created by running:
141	>	*
142	>	*      openssl dhparam -out dhparam.pem 2048
143	>	*
144	>	* Prime size must be at least 1024 bits. Further information
145	>	* regarding specific OpenSSL dhparam command-line options
146	>	* can be found in the OpenSSL manual.
147	>	*/
148	>	#       ssl_dh_param_file = "etc/dhparam.pem";
149
150	<	/*
151	<	* log {}:  contains information about logfiles.
152	<	*/
153	<	log {
154	<	/* Do you want to enable logging to ircd.log? */
155	<	use_logging = yes;
150	>	/*
151	>	* ssl_dh_elliptic_curve: defines the curve to use for the
152	>	* Elliptic Curve Diffie-Hellman (ECDH) algorithm.
153	>	*
154	>	* A list of supported curves by OpenSSL can be obtained by running:
155	>	*
156	>	*      openssl ecparam -list_curves
157	>	*/
158	>	#       ssl_dh_elliptic_curve = "secp521r1";
159
160		/*
161	<	* logfiles: the logfiles to use for user connects, /oper uses,
162	<	* and failed /oper.  These files must exist for logging to be used.
161	>	* ssl_cipher_list: list of ciphers to support on _this_ server.
162	>	* Can be used to enforce specific ciphers for incoming SSL/TLS
163	>	* connections. If a client (which also includes incoming server connections)
164	>	* is not capable of using any of the ciphers listed here, the connection will
165	>	* simply be rejected.
166	>	*
167	>	* A list of supported ciphers by OpenSSL can be obtained by running:
168	>	*
169	>	*      openssl ciphers -ssl3 -tls1 -v
170	>	*
171	>	* Multiple ciphers are separated by colons. The order of preference is
172	>	* from left to right.
173		*/
174	<	fname_userlog = "logs/userlog";
148	<	fname_operlog = "logs/operlog";
149	<	fname_killlog = "logs/kill";
150	<	fname_klinelog = "logs/kline";
151	<	fname_glinelog = "logs/gline";
174	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
175
176		/*
177	<	* log_level: the amount of detail to log in ircd.log.  The
178	<	* higher, the more information is logged.  May be changed
179	<	* once the server is running via /quote SET LOG.  Either:
180	<	* L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
177	>	* ssl_message_digest_algorithm: defines what cryptographic hash function
178	>	* to use for generating fingerprint hashes of X.509 certificates.
179	>	* Default is SHA-256 if nothing else is specified.
180	>	*
181	>	* A list of supported message digest algorithms by OpenSSL can be obtained by running:
182	>	*
183	>	*      openssl list-message-digest-algorithms
184		*/
185	<	log_level = L_INFO;
185	>	#       ssl_message_digest_algorithm = "sha256";
186	>	};
187	>
188	>	/*
189	>	* admin {}:  contains admin information about the server
190	>	*/
191	>	admin {
192	>	name = "Smurf target";
193	>	description = "Main Server Administrator";
194	>	email = "<syn@packets.r.us>";
195		};
196
197		/*
198	<	* class {}:  contains information about classes for users (OLD Y:)
198	>	* class {}:  contains information about classes for users
199		*/
200		class {
201	<	/* name: the name of the class.  classes are text now */
201	>	/* name: the name of the class. */
202		name = "users";
203
204		/*
#	Line 174 | Line 209 | class {
209
210		/*
211		* number_per_ip: how many local users are allowed to connect
212	<	* from one IP  (optional)
212	>	* from a single IP address (optional)
213		*/
214		number_per_ip = 2;
215
216		/*
217		* max_local: how many local users are allowed to connect
218	<	* from one ident@host  (optional)
218	>	* from a single ident@host (optional)
219		*/
220		max_local = 2;
221
222		/*
223	<	* max_global: network-wide limit of users per ident@host  (optional)
223	>	* max_global: network-wide limit of users per ident@host (optional)
224		*/
225		max_global = 10;
226
#	Line 195 | Line 230 | class {
230		max_number = 100;
231
232		/*
233	<	* the following lines are optional and allow you to define
234	<	* how many users can connect from one /NN subnet
233	>	* The following lines are optional and allow you to define
234	>	* how many users can connect from one /NN subnet.
235		*/
236		cidr_bitlen_ipv4 = 24;
237		cidr_bitlen_ipv6 = 120;
238		number_per_cidr = 16;
239
240		/*
241	<	* sendq: the amount of data allowed in a clients queue before
241	>	* sendq: the amount of data allowed in a client's send queue before
242		* they are dropped.
243		*/
244		sendq = 100 kbytes;
245	+
246	+	/*
247	+	* recvq: the amount of data allowed in a client's receive queue before
248	+	* they are dropped for flooding. Defaults to 2560 if the chosen value
249	+	* isn't within the range of 512 to 8000.
250	+	*/
251	+	recvq = 2560 bytes;
252		};
253
254		class {
#	Line 214 | Line 256 | class {
256		ping_time = 90 seconds;
257		number_per_ip = 10;
258		max_number = 100;
259	<	sendq = 100kbytes;
259	>	sendq = 100 kbytes;
260	>
261	>	/*
262	>	* max_channels: maximum number of channels users in this class can join.
263	>	*/
264	>	max_channels = 60;
265	>
266	>	/*
267	>	* min_idle: minimum idle time that is shown in /whois.
268	>	*/
269	>	min_idle = 3 hours;
270	>
271	>	/*
272	>	* max_idle: maximum idle time that is shown in /whois.
273	>	*/
274	>	max_idle = 8 hours;
275	>
276	>	/*
277	>	* flags:
278	>	*
279	>	* random_idle          - a fake idle time is set randomly between
280	>	*                        min_idle and max_idle
281	>	* hide_idle_from_opers - the fake idle time will also be shown to operators
282	>	*/
283	>	flags = random_idle, hide_idle_from_opers;
284		};
285
286		class {
#	Line 222 | Line 288 | class {
288		ping_time = 90 seconds;
289
290		/*
291	<	* ping_warning: how fast a server must reply to a PING before
226	<	* a warning to opers is generated.
227	<	*/
228	<	ping_warning = 15 seconds;
229	<
230	<	/*
231	<	* connectfreq: only used in server classes.  Specifies the delay
291	>	* connectfreq: only used in server classes. Specifies the delay
292		* between autoconnecting to servers.
293		*/
294		connectfreq = 5 minutes;
295
296	<	/* max number: the amount of servers to autoconnect to */
296	>	/* max number: the number of servers to autoconnect to. */
297		max_number = 1;
298
299	<	/* sendq: servers need a higher sendq as they send more data */
299	>	/* sendq: servers need a higher sendq as they send more data. */
300		sendq = 2 megabytes;
301		};
302
303		/*
304	<	* listen {}:  contains information about the ports ircd listens on (OLD P:)
304	>	* motd {}: Allows the display of a different MOTD to a client
305	>	* depending on its origin. Applies to local users only.
306	>	*/
307	>	motd {
308	>	/*
309	>	* mask: multiple mask entries are permitted. Mask can either be
310	>	* a class name or a hostname. CIDR is supported.
311	>	*/
312	>	mask = "*.at";
313	>	mask = "*.de";
314	>	mask = "*.ch";
315	>
316	>	/*
317	>	* file: path to the actual motd file.
318	>	*/
319	>	file = "etc/german.motd";
320	>	};
321	>
322	>	/*
323	>	* listen {}:  contains information about the ports ircd listens on
324		*/
325		listen {
326		/*
327	<	* port: the specific port to listen on.  If no host is specified
328	<	* before, it will listen on all available IPs.
327	>	* port: the port to listen on. If no host is specified earlier
328	>	* in the listen {} block, it will listen on all available IPs.
329		*
330	<	* Ports are separated via a comma, a range may be specified using ".."
330	>	* Ports are separated by commas; a range may be specified using ".."
331		*/
332	<
333	<	/* port: listen on all available IPs, ports 6665 to 6669 */
332	>
333	>	/* port: listen on all available IP addresses, ports 6665 to 6669. */
334		port = 6665 .. 6669;
335
336		/*
337	<	* Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
337	>	* Listen on 192.168.0.1/6697 with SSL enabled and hidden from STATS P
338		* unless you are an administrator.
339		*
340	<	* NOTE: The "flags" directive has to come before "port".  Always!
340	>	* NOTE: The "flags" directive always has to come before "port".
341	>	*
342	>	* Currently available flags are:
343	>	*
344	>	*  ssl    - Port may only accept TLS/SSL connections
345	>	*  server - Only server connections are permitted
346	>	*  hidden - Port is hidden from /stats P, unless you're an admin
347		*/
348		flags = hidden, ssl;
349		host = "192.168.0.1";
350		port = 6697;
351
352		/*
353	<	* host: set a specific IP/host the ports after the line will listen
354	<	* on.  This may be ipv4 or ipv6.
353	>	* host: set a specific IP address/host to listen on using the
354	>	* subsequent port definitions. This may be IPv4 or IPv6.
355		*/
356		host = "1.2.3.4";
357		port = 7000, 7001;
#	Line 276 | Line 361 | listen {
361		};
362
363		/*
364	<	* auth {}:  allow users to connect to the ircd (OLD I:)
364	>	* auth {}:  allow users to connect to the ircd
365		*/
366		auth {
367		/*
368	<	* user: the user@host allowed to connect.  Multiple IPv4/IPv6 user
369	<	* lines are permitted per auth block.
368	>	* user: the user@host allowed to connect. Multiple user
369	>	* lines are permitted within each auth {} block.
370		*/
371		user = "*@172.16.0.0/12";
372		user = "*test@123D:B567:*";
373
374	<	/* password: an optional password that is required to use this block */
374	>	/* password: an optional password that is required to use this block. */
375		password = "letmein";
376
377		/*
#	Line 296 | Line 381 | auth {
381		encrypted = yes;
382
383		/*
384	<	* spoof: fake the users host to this.  This is free-form,
385	<	* just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
384	>	* spoof: fake the user's host to this. This is free-form, just do
385	>	* everyone a favor and don't abuse it. ('=' prefix on /stats I)
386		*/
387		spoof = "I.still.hate.packets";
388
389	<	/* class: the class the user is placed in */
389	>	/* class: the class the user is placed in. */
390		class = "opers";
391
392		/*
393	<	* need_password: don't allow users who haven't supplied the correct
394	<	*                password to connect using another auth{} block
395	<	*                ('&' prefix on /stats I if disabled)
396	<	* need_ident:    require the user to have identd to connect ('+' prefix on /stats I)
397	<	* spoof_notice:  enable spoofing notification to admins
398	<	* exceed_limit:  allow a user to exceed class limits ('>' prefix on /stats I)
399	<	* kline_exempt:  exempt this user from k/glines ('^' prefix on /stats I)
400	<	* gline_exempt:  exempt this user from glines ('_' prefix on /stats I)
401	<	* resv_exempt:   exempt this user from resvs ('$' prefix on /stats I)
402	<	* no_tilde:      remove ~ from a user with no ident ('-' prefix on /stats I)
403	<	* can_flood:     allow this user to exceed flood limits ('|' prefix on /stats I)
404	<	* can_idle:      exempt this user from idle restrictions ('<' prefix on /stats I)
393	>	* need_password - don't allow users who haven't supplied the correct  | ('&' prefix on /stats I if disabled)
394	>	*                 password to connect using another auth {} block
395	>	* need_ident    - require the user to have identd to connect          | ('+' prefix on /stats I)
396	>	* spoof_notice  - enable spoofing notification to admins
397	>	* exceed_limit  - allow a user to exceed class limits                 | ('>' prefix on /stats I)
398	>	* kline_exempt  - exempt this user from k/glines                      | ('^' prefix on /stats I)
399	>	* gline_exempt  - exempt this user from glines                        | ('_' prefix on /stats I)
400	>	* resv_exempt   - exempt this user from resvs                         | ('$' prefix on /stats I)
401	>	* no_tilde      - remove ~ from a user with no ident                  | ('-' prefix on /stats I)
402	>	* can_flood     - allow this user to exceed flood limits              | ('|' prefix on /stats I)
403	>	* webirc        - enables WEBIRC authentication for web-based         | ('<' prefix on /stats I)
404	>	*                 clients such as Mibbit
405		*/
406		flags = need_password, spoof_notice, exceed_limit, kline_exempt,
407	<	gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
407	>	gline_exempt, resv_exempt, no_tilde, can_flood;
408		};
409
410		auth {
411		/*
412	<	* redirect: the server and port to redirect a user to.  A user does
413	<	* not have to obey the redirection, the ircd just suggests an alternative
414	<	* server for them.
412	>	* redirserv, redirport: the server and port to redirect a user to.
413	>	* A user does not have to obey the redirection; the ircd just
414	>	* suggests an alternative server for them.
415		*/
416	<	redirserv = "this.is.not.a.real.server";
416	>	redirserv = "server.tld";
417		redirport = 6667;
333	–
334	–	user = "*.server";
418
419	<	/* class: a class is required even though it is not used */
419	>	user = "*@*.tld";
420	>
421	>	/* class: a class is required even though it is not used. */
422		class = "users";
423		};
424
#	Line 344 | Line 429 | auth {
429		};
430
431		/*
432	<	* operator {}:  defines ircd operators. (OLD O:)
348	<	*
349	<	* ircd-hybrid no longer supports local operators, privileges are
350	<	* controlled via flags.
432	>	* operator {}:  defines ircd operators
433		*/
434		operator {
435	<	/* name: the name of the oper */
436	<	/* NOTE: operator "opername"{} is also supported */
355	<	name = "god";
435	>	/* name: the name of the operator */
436	>	name = "sheep";
437
438		/*
439	<	* user: the user@host required for this operator.  CIDR is not
440	<	* supported.  Multiple user="" lines are supported.
439	>	* user: the user@host required for this operator. Multiple user
440	>	* lines are permitted within each operator {} block.
441		*/
442	<	user = "*god@*";
443	<	user = "*@127.0.0.1";
442	>	user = "*sheep@192.168.0.0/16";
443	>	user = "*@127.0.0.0/8";
444
445		/*
446	<	* password: the password required to oper.  By default this will
447	<	* need to be encrypted using 'mkpasswd'.  MD5 is supported.
446	>	* password: the password required to oper. By default this will
447	>	* need to be encrypted by using the provided mkpasswd tool.
448	>	* Several password hash algorithms are available depending
449	>	* on your system's crypt() implementation. For example, a modern
450	>	* glibc already has support for the SHA-256/512 and MD5 encryption
451	>	* algorithms.
452		*/
453	<	password = "etcnjl8juSU1E";
453	>	password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
454
455		/*
456		* encrypted: controls whether the oper password above has been
457	<	* encrypted.  (OLD CRYPT_OPER_PASSWORD now optional per operator)
457	>	* encrypted. Default is 'yes' if nothing else is specified.
458		*/
459		encrypted = yes;
460
461		/*
462	<	* rsa_public_key_file: the public key for this oper when using Challenge.
463	<	* A password should not be defined when this is used, see
462	>	* rsa_public_key_file: the public key for this oper when using /challenge.
463	>	* A password should not be defined when this is used; see
464		* doc/challenge.txt for more information.
465		*/
466	<	#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
466	>	#       rsa_public_key_file = "etc/oper.pub";
467	>
468	>	/*
469	>	* ssl_certificate_fingerprint: enhances security by additionally checking
470	>	* the oper's client certificate fingerprint against the specified
471	>	* fingerprint below.
472	>	*
473	>	* Hint: your users can use the following command to obtain a SHA-256 hash
474	>	* of their ssl certificate:
475	>	*
476	>	*      openssl x509 -sha256 -noout -fingerprint -in cert.pem | sed -e 's/^.*=//;s/://g'
477	>	*/
478	>	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
479
480	<	/* class: the class the oper joins when they successfully /oper */
480	>	/*
481	>	* ssl_connection_required: client must be connected over SSL/TLS
482	>	* in order to be able to use this operator {} block.
483	>	* Default is 'no' if nothing else is specified.
484	>	*/
485	>	ssl_connection_required = no;
486	>
487	>	/* class: the class the oper joins when they successfully /oper or /challenge. */
488		class = "opers";
489
490		/*
491	<	* umodes: default usermodes opers get when they /oper.  If defined,
492	<	* it will override oper_umodes settings in general {}.
491	>	* umodes: the default usermodes opers get when they /oper or /challenge.
492	>	* If defined, it will override oper_umodes settings in general {}.
493		* Available usermodes:
494		*
495		* +b - bots         - See bot and drone flooding notices
496		* +c - cconn        - Client connection/quit notices
497		* +D - deaf         - Don't receive channel messages
498		* +d - debug        - See debugging notices
499	<	* +f - full         - See I: line full notices
499	>	* +e - external     - See remote server connection and split notices
500	>	* +F - farconnect   - Remote client connection/quit notices
501	>	* +f - full         - See auth {} block full notices
502		* +G - softcallerid - Server Side Ignore for users not on your channels
503		* +g - callerid     - Server Side Ignore (for privmsgs etc)
504	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
505	<	*                     a channel
504	>	* +H - hidden       - Hides operator status to other users
505	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
506	>	* +j - rej          - See rejected client notices
507		* +k - skill        - See server generated KILL messages
508		* +l - locops       - See LOCOPS messages
509		* +n - nchange      - See client nick changes
510	<	* +r - rej          - See rejected client notices
510	>	* +p - hidechans    - Hides channel list in WHOIS
511	>	* +q - hideidle     - Hides idle and signon time in WHOIS
512	>	* +R - nononreg     - Only receive private messages from registered clients
513		* +s - servnotice   - See general server notices
514		* +u - unauth       - See unauthorized client notices
515		* +w - wallop       - See server generated WALLOPS
407	–	* +x - external     - See remote server connection and split notices
516		* +y - spy          - See LINKS, STATS, TRACE notices etc.
409	–	* +z - operwall     - See oper generated WALLOPS
517		*/
518	<	#       umodes = locops, servnotice, operwall, wallop;
518	>	umodes = locops, servnotice, wallop;
519
520		/*
521	<	* privileges: controls the activities and commands an oper is
522	<	* allowed to do on the server.  All options default to no.
523	<	* Available options:
524	<	*
525	<	* global_kill:  allows remote users to be /KILL'd (OLD 'O' flag)
526	<	* remote:       allows remote SQUIT and CONNECT   (OLD 'R' flag)
527	<	* remoteban:    allows remote KLINE/UNKLINE
528	<	* kline:        allows KILL, KLINE and DLINE      (OLD 'K' flag)
529	<	* unkline:      allows UNKLINE and UNDLINE        (OLD 'U' flag)
530	<	* gline:        allows GLINE                      (OLD 'G' flag)
531	<	* xline:         allows XLINE                     (OLD 'X' flag)
532	<	* operwall:     allows OPERWALL
533	<	* nick_changes: allows oper to see nickchanges    (OLD 'N' flag)
534	<	*               via usermode +n
535	<	* rehash:       allows oper to REHASH config      (OLD 'H' flag)
536	<	* die:          allows DIE and RESTART            (OLD 'D' flag)
537	<	* admin:        gives admin privileges.  admins
538	<	*               may (un)load modules and see the
539	<	*               real IPs of servers.
540	<	* hidden_admin: same as 'admin', but noone can recognize you as
541	<	*               being an admin
542	<	* hidden_oper:  not shown in /stats p (except for other operators)
543	<	*/
544	<	/* You can either use
545	<	* die = yes;
546	<	* rehash = yes;
547	<	*
441	<	* or in a flags statement i.e.
442	<	* flags = die, rehash;
443	<	*
444	<	* You can also negate a flag with ~ i.e.
445	<	* flags = ~remote;
446	<	*
521	>	* privileges: controls the activities and commands an oper is
522	>	* allowed to do on the server. All flags default to 'no'.
523	>	* Available flags:
524	>	*
525	>	* admin          - gives administrator privileges    | ('A' flag)
526	>	* connect        - allows local CONNECT              | ('P' flag)
527	>	* connect:remote - allows remote CONNECT             | ('Q' flag)
528	>	* die            - allows DIE                        | ('D' flag)
529	>	* dline          - allows DLINE                      |
530	>	* gline          - allows GLINE                      | ('G' flag)
531	>	* globops        - allows GLOBOPS                    |
532	>	* kill           - allows to KILL local clients      | ('N' flag)
533	>	* kill:remote    - allows remote users to be /KILL'd | ('O' flag)
534	>	* kline          - allows KLINE                      | ('K' flag)
535	>	* locops         - allows LOCOPS                     |
536	>	* module         - allows MODULE                     |
537	>	* rehash         - allows oper to REHASH config      | ('H' flag)
538	>	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
539	>	* restart        - allows RESTART                    |
540	>	* set            - allows SET                        |
541	>	* squit          - allows local SQUIT                | ('R' flag)
542	>	* squit:remote   - allows remote SQUIT               | ('S' flag)
543	>	* undline        - allows UNDLINE                    |
544	>	* unkline        - allows UNKLINE                    | ('U' flag)
545	>	* unxline        - allows UNXLINE                    |
546	>	* wallops        - allows WALLOPS                    |
547	>	* xline          - allows XLINE                      | ('X' flag)
548		*/
549	<	flags = global_kill, remote, kline, unkline, xline,
550	<	die, rehash, nick_changes, admin, operwall;
549	>	flags = admin, connect, connect:remote, die, globops, kill, kill:remote,
550	>	kline, module, rehash, restart, set, unkline, unxline, xline;
551		};
552
553		/*
554	<	* connect {}:  controls servers we connect to (OLD C:, N:, H:, L:)
554	>	* service {}: specifies a server which may act as a network service
555	>	*
556	>	* NOTE: it is very important that every server on the network
557	>	*       has the same service {} block.
558	>	*/
559	>	service {
560	>	name = "service.someserver";
561	>	name = "stats.someserver";
562	>	};
563	>
564	>	/*
565	>	* connect {}: define a server to connect to
566		*/
567		connect {
568	<	/* name: the name of the server */
568	>	/* name: the name of the server. */
569		name = "irc.uplink.com";
570
571		/*
572	<	* host: the host or IP to connect to.  If a hostname is used it
573	<	* must match the reverse dns of the server.
572	>	* host: the host or IP address to connect to. If a hostname is used it
573	>	* must match the reverse DNS of the server.
574		*/
575		host = "192.168.0.1";
576
577		/*
578	<	* vhost: the IP to bind to when we connect outward to servers.
578	>	* vhost: the IP address to bind to when making outgoing connections to
579	>	* servers.
580		* serverinfo::vhost and serverinfo::vhost6 will be overridden
581		* by this directive.
582		*/
583		vhost = "192.168.0.2";
584
585		/*
586	<	* passwords: the passwords we send (OLD C:) and accept (OLD N:).
587	<	* The remote server will have these passwords reversed.
586	>	* send_password, accept_password: the passwords to send and accept.
587	>	* The remote server will have these passwords swapped.
588		*/
589		send_password = "password";
590		accept_password = "anotherpassword";
591
592		/*
593		* encrypted: controls whether the accept_password above has been
594	<	* encrypted.  (OLD CRYPT_LINK_PASSWORD now optional per connect)
594	>	* encrypted.
595		*/
596		encrypted = no;
597
598	<	/* port: the port to connect to this server on */
598	>	/* port: the port to connect to this server on. */
599		port = 6666;
600
601		/*
602	<	* hub_mask: the mask of servers that this server may hub.  Multiple
603	<	* entries are permitted
602	>	* hub_mask: the mask of servers that this server may hub. Multiple
603	>	* entries are permitted.
604		*/
605		hub_mask = "*";
606
607		/*
608	<	* leaf_mask: the mask of servers this server may not hub.  Multiple
609	<	* entries are permitted.  Useful for forbidding EU -> US -> EU routes.
608	>	* leaf_mask: the mask of servers this server may not hub. Multiple
609	>	* entries are permitted. Useful for forbidding EU -> US -> EU routes.
610		*/
611		#       leaf_mask = "*.uk";
612
613	<	/* fakename: the servername we pretend to be when we connect */
501	<	#       fakename = "*.arpa";
502	<
503	<	/* class: the class this server is in */
613	>	/* class: the class this server is in. */
614		class = "server";
615
616		/*
617	<	* autoconn:    controls whether we autoconnect to this server or not,
618	<	*              dependent on class limits.  By default, this is disabled.
619	<	* compressed:  controls whether traffic is compressed via ziplinks.
620	<	*              By default, this is disabled
621	<	* cryptlink:   enable full encryption for all data passing between our
622	<	*              server and this link and rsa authentication.
623	<	* burst_away:  This will send the /away string that users have set
624	<	*              on the server burst.  Note this can be a lot of data
515	<	*              and slow down your server burst.
516	<	* topicburst:  Send topics to this server during channel burst.  Works
517	<	*              only if the server we are connecting to is capable
518	<	*              of TBURST/TB.
617	>	* ssl_cipher_list: list of ciphers that the server we are connecting to
618	>	* must support. If the server is not capable of using any of the ciphers
619	>	* listed below, the connection will simply be rejected.
620	>	* Can be used to enforce stronger ciphers, even though this option
621	>	* is not necessarily required to establish a SSL/TLS connection.
622	>	*
623	>	* Multiple ciphers are separated by colons. The order of preference
624	>	* is from left to right.
625		*/
626	<	#       flags = autoconn, compressed, cryptlink, burst_away, topicburst;
521	<	};
522	<
523	<	connect {
524	<	name = "encrypted.auth.example";
525	<	host = "some.host.somewhere";
526	<	port = 6667;
527	<
528	<	flags = cryptlink;
626	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
627
628		/*
629	<	* rsa_public_key_file: the path to the public keyfile of the server.
630	<	* Used instead of passwords.
629	>	* ssl_certificate_fingerprint: enhances security by additionally checking
630	>	* the server's client certificate fingerprint against the specified
631	>	* fingerprint below.
632		*/
633	<	rsa_public_key_file = "etc/remote.server.keyfile";
633	>	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
634
635		/*
636	<	* cipher preference: set the preferred cipher for this link
637	<	*
638	<	* Available ciphers are:
540	<	*      BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
541	<	*      RC5.12/128 RC5.8/128 3DES/168 DES/56
542	<	*
543	<	* NOTE:  Some ciphers may not be supported by your OpenSSL.
544	<	*        Check the output from 'configure' for available ciphers.
545	<	*
546	<	* NOTE2: To help you decide what cipher to use, tools/encspeed
547	<	*        will show you approximately how fast each cipher is.
548	<	*        However, blowfish is fast and secure, and is probably
549	<	*        a good default for most situations.
550	<	*
551	<	* NOTE3: Default if none is set is BF/128
552	<	*
553	<	* The cipher *MUST* be the same in both directions.  If you
554	<	* set a cipher preference, your uplink must set the same cipher,
555	<	* else it will not link.
636	>	* autoconn   - controls whether we autoconnect to this server or not,
637	>	*              dependent on class limits. By default, this is disabled.
638	>	* ssl        - Initiates a TLS/SSL connection.
639		*/
640	<	#       cipher_preference = "BF/168";
640	>	#       flags = autoconn, ssl;
641		};
642
643	<	/*
644	<	* NOTE: Don't add an extra 'name=' entry if you use
562	<	* the connect "name"{} feature
563	<	*/
564	<	connect "ipv6.some.server" {
643	>	connect {
644	>	name = "ipv6.some.server";
645		host = "3ffd:dead:beef::1";
646		send_password = "password";
647		accept_password = "password";
#	Line 577 | Line 657 | connect "ipv6.some.server" {
657
658		/*
659		* cluster {}:  servers that share klines/unkline/xline/unxline/resv/unresv/locops
660	<	* automatically (OLD hyb6 SLAVE_SERVERS)
660	>	* automatically
661		*/
662		cluster {
663		/*
664	<	* name: the server to share with, this can take wildcards
664	>	* name: the server to share with; this can take wildcards
665		*
666	<	* NOTE: only local actions will be clustered, meaning if
666	>	* NOTE: only local actions will be clustered, meaning that if
667		*       the server receives a shared kline/unkline/etc, it
668		*       will not be propagated to clustered servers.
669		*
670		*       Remote servers are not necessarily required to accept
671	<	*       clustered lines, they need a shared{} for *THIS* server
672	<	*       in order to accept them.
671	>	*       clustered lines, they need a shared {} block for *THIS*
672	>	*       server in order to accept them.
673		*/
674		name = "*.arpa";
675
676		/*
677	<	* type: list of what to share, options are as follows:
678	<	*      kline   - share klines
679	<	*      tkline  - share temporary klines
680	<	*      unkline - share unklines
681	<	*      xline   - share xlines
682	<	*      txline  - share temporary xlines
683	<	*      unxline - share unxlines
684	<	*      resv    - share resvs
685	<	*      tresv   - share temporary resvs
686	<	*      unresv  - share unresvs
687	<	*      locops  - share locops
608	<	*      all     - share all of the above (default)
677	>	* type: list of what to share; options are as follows:
678	>	*      dline   - share dlines
679	>	*      undline - share undlines
680	>	*      kline   - share klines
681	>	*      unkline - share unklines
682	>	*      xline   - share xlines
683	>	*      unxline - share unxlines
684	>	*      resv    - share resvs
685	>	*      unresv  - share unresvs
686	>	*      locops  - share locops
687	>	*      all     - share all of the above (default)
688		*/
689		type = kline, unkline, locops, xline, resv;
690		};
691
692		/*
693	<	* shared {}: users that are allowed to remote kline (OLD U:)
693	>	* shared {}: users that are allowed to remote kline
694		*
695	<	* NOTE: This can be effectively used for remote klines.
695	>	* NOTE: This can effectively be used for remote klines.
696		*       Please note that there is no password authentication
697	<	*       for users setting remote klines.  You must also be
697	>	*       for users setting remote klines. You must also be
698		*       /oper'd in order to issue a remote kline.
699		*/
700		shared {
701		/*
702	<	* name: the server the user must be on to set klines.  If this is not
703	<	* specified, the user will be allowed to kline from all servers.
702	>	* name: the server the user must be connected to in order to set klines.
703	>	* If this is not specified, the user will be allowed to kline from all
704	>	* servers.
705		*/
706		name = "irc2.some.server";
707
708		/*
709	<	* user: the user@host mask that is allowed to set klines.  If this is
709	>	* user: the user@host mask that is allowed to set klines. If this is
710		* not specified, all users on the server above will be allowed to set
711		* a remote kline.
712		*/
#	Line 634 | Line 714 | shared {
714
715		/*
716		* type: list of what to share, options are as follows:
717	<	*      kline   - allow oper/server to kline
718	<	*      tkline  - allow temporary klines
719	<	*      unkline - allow oper/server to unkline
720	<	*      xline   - allow oper/server to xline
721	<	*      txline  - allow temporary xlines
722	<	*      unxline - allow oper/server to unxline
723	<	*      resv    - allow oper/server to resv
724	<	*      tresv   - allow temporary resvs
645	<	*      unresv  - allow oper/server to unresv
717	>	*      dline   - allow oper/server to dline
718	>	*      undline - allow oper/server to undline
719	>	*      kline   - allow oper/server to kline
720	>	*      unkline - allow oper/server to unkline
721	>	*      xline   - allow oper/server to xline
722	>	*      unxline - allow oper/server to unxline
723	>	*      resv    - allow oper/server to resv
724	>	*      unresv  - allow oper/server to unresv
725		*      locops  - allow oper/server to locops - only used for servers that cluster
726	<	*      all     - allow oper/server to do all of the above (default)
726	>	*      all     - allow oper/server to do all of the above (default)
727		*/
728		type = kline, unkline, resv;
729		};
730
731		/*
732	<	* kill {}:  users that are not allowed to connect (OLD K:)
733	<	* Oper issued klines will be added to the specified kline config
732	>	* kill {}:  users that are not allowed to connect
733	>	* Oper issued klines will be added to the specified kline database
734		*/
735		kill {
736		user = "bad@*.hacked.edu";
737		reason = "Obviously hacked account";
738		};
739
661	–	kill {
662	–	user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.org$";
663	–	type = regex;
664	–	};
665	–
740		/*
741	<	* deny {}:  IPs that are not allowed to connect (before DNS/ident lookup)
742	<	* Oper issued dlines will be added to the specified dline config
741	>	* deny {}:  IP addresses that are not allowed to connect
742	>	* (before DNS/ident lookup)
743	>	* Oper issued dlines will be added to the specified dline database
744		*/
745		deny {
746		ip = "10.0.1.0/24";
#	Line 673 | Line 748 | deny {
748		};
749
750		/*
751	<	* exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:)
751	>	* exempt {}:  IP addresses that are exempt from deny {} and Dlines
752		*/
753		exempt {
754		ip = "192.168.0.0/16";
755		};
756
757		/*
758	<	* resv {}:  nicks and channels users may not use/join (OLD Q:)
758	>	* resv {}:  nicks and channels users may not use/join
759		*/
760	<	resv {
761	<	/* reason: the reason for the proceeding resv's */
762	<	reason = "There are no services on this network";
760	>	resv { mask = "clone*"; reason = "Clone bots"; };
761	>	resv { mask = "Global"; reason = "Reserved for services"; };
762	>	resv { mask = "ChanServ"; reason = "Reserved for services"; };
763	>	resv { mask = "NickServ"; reason = "Reserved for services"; };
764	>	resv { mask = "OperServ"; reason = "Reserved for services"; };
765	>	resv { mask = "MemoServ"; reason = "Reserved for services"; };
766	>	resv { mask = "BotServ"; reason = "Reserved for services"; };
767	>	resv { mask = "HelpServ"; reason = "Reserved for services"; };
768	>	resv { mask = "HostServ"; reason = "Reserved for services"; };
769	>	resv { mask = "StatServ"; reason = "Reserved for services"; };
770	>	resv { mask = "#*services*"; reason = "Reserved for services"; };
771
772	<	/* resv: the nicks and channels users may not join/use */
773	<	nick = "nickserv";
774	<	nick = "chanserv";
775	<	channel = "#services";
772	>	resv {
773	>	/*
774	>	* mask: masks starting with a '#' are automatically considered
775	>	* as channel name masks.
776	>	*/
777	>	mask = "#helsinki";
778	>	reason = "Channel is reserved for Finnish inhabitants";
779
780	<	/* resv: wildcard masks are also supported in nicks only */
781	<	reason = "Clone bots";
782	<	nick = "clone*";
780	>	/*
781	>	* exempt: can be either a ISO 3166 alpha-2 two letter country
782	>	* code, or a nick!user@host mask. CIDR is supported. Exempt
783	>	* entries can be stacked.
784	>	*/
785	>	exempt = "FI";
786		};
787
788		/*
789	<	* gecos {}:  The X: replacement, used for banning users based on
701	<	* their "realname".
789	>	* gecos {}:  used for banning users based on their "realname".
790		*/
791		gecos {
792		name = "*sex*";
#	Line 710 | Line 798 | gecos {
798		reason = "Trojan drone";
799		};
800
713	–	gecos {
714	–	name = "*http*";
715	–	reason = "Spambot";
716	–	};
717	–
718	–	gecos {
719	–	name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
720	–	type = regex;
721	–	};
722	–
801		/*
802	<	* channel {}:  The channel block contains options pertaining to channels
802	>	* channel {}:  the channel block contains options pertaining to channels
803		*/
804		channel {
805		/*
806		* disable_fake_channels: this option, if set to 'yes', will
807	<	* disallow clients to create or join channels that have one
807	>	* disallow clients from creating or joining channels that have one
808		* of the following ASCII characters in their name:
809		*
810		*   2 | bold
811		*   3 | mirc color
812	<	*  15 | plain text
812	>	*  15 | plain text
813		*  22 | reverse
814	+	*  29 | italic
815		*  31 | underline
816		* 160 | non-breaking space
817		*/
818		disable_fake_channels = yes;
819
820		/*
821	<	* restrict_channels: reverse channel RESVs logic, only reserved
822	<	* channels are allowed
744	<	*/
745	<	restrict_channels = no;
746	<
747	<	/*
748	<	* disable_local_channels: prevent users from joining &channels.
749	<	*/
750	<	disable_local_channels = no;
751	<
752	<	/*
753	<	* use_invex: Enable/disable channel mode +I, a n!u@h list of masks
754	<	* that can join a +i channel without an invite.
821	>	* invite_client_count, invite_client_time: how many INVITE commands
822	>	* are permitted per client per invite_client_time.
823		*/
824	<	use_invex = yes;
824	>	invite_client_count = 10;
825	>	invite_client_time = 5 minutes;
826
827		/*
828	<	* use_except: Enable/disable channel mode +e, a n!u@h list of masks
829	<	* that can join a channel through a ban (+b).
828	>	* knock_client_count, knock_client_time: how many KNOCK commands
829	>	* are permitted per client per knock_client_time.
830		*/
831	<	use_except = yes;
831	>	knock_client_count = 1;
832	>	knock_client_time = 5 minutes;
833
834		/*
835	<	* use_knock: Allows users to request an invite to a channel that
836	<	* is locked somehow (+ikl).  If the channel is +p or you are banned
767	<	* the knock will not be sent.
768	<	*/
769	<	use_knock = yes;
770	<
771	<	/*
772	<	* knock_delay: The amount of time a user must wait between issuing
773	<	* the knock command.
774	<	*/
775	<	knock_delay = 1 minutes;
776	<
777	<	/*
778	<	* knock_delay_channel: How often a knock to any specific channel
779	<	* is permitted, regardless of the user sending the knock.
835	>	* knock_delay_channel: how often a KNOCK to any specific channel
836	>	* is permitted, regardless of the user sending the KNOCK.
837		*/
838		knock_delay_channel = 1 minute;
839
840		/*
841	<	* burst_topicwho: enable sending of who set topic on topicburst
842	<	* default is yes
841	>	* max_channels: the maximum number of channels a user can join/be on.
842	>	* This is a default value which can be overriden with class {} blocks.
843		*/
844	<	burst_topicwho = yes;
788	<
789	<	/*
790	<	* max_chans_per_user: The maximum number of channels a user can
791	<	* join/be on.
792	<	*/
793	<	max_chans_per_user = 25;
794	<
795	<	/* quiet_on_ban: stop banned people talking in channels. */
796	<	quiet_on_ban = yes;
844	>	max_channels = 25;
845
846		/* max_bans: maximum number of +b/e/I modes in a channel */
847	<	max_bans = 25;
847	>	max_bans = 100;
848
849		/*
850	<	* how many joins in how many seconds constitute a flood, use 0 to
850	>	* how many joins in how many seconds constitute a flood. Use 0 to
851		* disable. +b opers will be notified (changeable via /set)
852		*/
853		join_flood_count = 16;
854		join_flood_time = 8 seconds;
855
856		/*
857	<	* splitcode: The ircd will now check splitmode every few seconds.
857	>	* The ircd will now check splitmode (whether a server is split from
858	>	* the network) every few seconds; this functionality is known as
859	>	* splitcode and is influenced by the options below.
860		*
861		* Either split users or split servers can activate splitmode, but
862		* both conditions must be met for the ircd to deactivate splitmode.
863	<	*
863	>	*
864		* You may force splitmode to be permanent by /quote set splitmode on
865		*/
866
867		/*
868		* default_split_user_count: when the usercount is lower than this level,
869	<	* consider ourselves split.  This must be set for automatic splitmode.
869	>	* consider ourselves split. This must be set for automatic splitmode.
870		*/
871		default_split_user_count = 0;
872
873		/*
874		* default_split_server_count: when the servercount is lower than this,
875	<	* consider ourselves split.  This must be set for automatic splitmode.
875	>	* consider ourselves split. This must be set for automatic splitmode.
876		*/
877		default_split_server_count = 0;
878
879	<	/* split no create: disallow users creating channels on split. */
879	>	/* no_create_on_split: do not allow users to create channels on split. */
880		no_create_on_split = yes;
881
882	<	/* split: no join: disallow users joining channels at all on a split */
882	>	/* no_join_on_split: do not allow users to join channels on a split. */
883		no_join_on_split = no;
884		};
885
886		/*
887	<	* serverhide {}:  The serverhide block contains the options regarding
888	<	* serverhiding
887	>	* serverhide {}:  the serverhide block contains the options regarding
888	>	* to server hiding. For more information regarding server hiding,
889	>	* please see doc/serverhide.txt
890		*/
891		serverhide {
892		/*
893	+	* disable_remote_commands: disable users issuing commands
894	+	* on remote servers.
895	+	*/
896	+	disable_remote_commands = no;
897	+
898	+	/*
899		* flatten_links: this option will show all servers in /links appear
900	<	* that they are linked to this current server
900	>	* as though they are linked to this current server.
901		*/
902		flatten_links = no;
903
#	Line 852 | Line 909 | serverhide {
909
910		/*
911		* hidden: hide this server from a /links output on servers that
912	<	* support it.  This allows hub servers to be hidden etc.
912	>	* support it. This allows hub servers to be hidden etc.
913		*/
914		hidden = no;
915
916		/*
860	–	* disable_hidden: prevent servers hiding themselves from a
861	–	* /links output.
862	–	*/
863	–	disable_hidden = no;
864	–
865	–	/*
917		* hide_servers: hide remote servernames everywhere and instead use
918		* hidden_name and network_desc.
919		*/
920		hide_servers = no;
921
922		/*
923	<	* Use this as the servername users see if hide_servers = yes.
923	>	* hide_services: define this if you want to hide the location of
924	>	* services servers that are specified in the service {} block.
925	>	*/
926	>	hide_services = no;
927	>
928	>	/*
929	>	* hidden_name: use this as the servername users see if hide_servers = yes.
930		*/
931		hidden_name = "*.hidden.com";
932
933		/*
934	<	* hide_server_ips: If this is disabled, opers will be unable to see servers
935	<	* ips and will be shown a masked ip, admins will be shown the real ip.
936	<	*
937	<	* If this is enabled, nobody can see a servers ip.  *This is a kludge*, it
938	<	* has the side effect of hiding the ips everywhere, including logfiles.
934	>	* hide_server_ips: if this is disabled, opers will be unable to see
935	>	* servers' IP addresses and will be shown a masked IP address; admins
936	>	* will be shown the real IP address.
937	>	*
938	>	* If this is enabled, nobody can see a server's IP address.
939	>	* *This is a kludge*: it has the side effect of hiding the IP addresses
940	>	* everywhere, including logfiles.
941		*
942		* We recommend you leave this disabled, and just take care with who you
943	<	* give admin=yes; to.
943	>	* give administrator privileges to.
944		*/
945		hide_server_ips = no;
946		};
947
948		/*
949	<	* general {}:  The general block contains many of the options that were once
950	<	* compiled in options in config.h.  The general block is read at start time.
949	>	* general {}:  the general block contains many of the options that were once
950	>	* compiled in options in config.h
951		*/
952		general {
953	<	/* max_watch: maximum WATCH entries */
954	<	max_watch = 64;
953	>	/*
954	>	* cycle_on_host_change: sends a fake QUIT/JOIN combination
955	>	* when services change the hostname of a specific client.
956	>	*/
957	>	cycle_on_host_change = yes;
958	>
959	>	/* services_name: servername of nick/channel services. */
960	>	services_name = "service.someserver";
961	>
962	>	/* max_watch: maximum WATCH entries a client can have. */
963	>	max_watch = 30;
964	>
965	>	/* max_accept: maximum allowed /accept's for +g usermode. */
966	>	max_accept = 30;
967	>
968	>	/* gline_enable: enable glines (network-wide temporary klines). */
969	>	gline_enable = yes;
970
971		/*
972	<	* gline_min_cidr: the minimum required length of a CIDR bitmask
973	<	* for IPv4 based glines
972	>	* gline_duration: the amount of time a G-line will remain on your
973	>	* server before expiring.
974		*/
975	<	gline_min_cidr = 16;
975	>	gline_duration = 1 day;
976
977		/*
978	<	* gline_min_cidr6: the minimum required length of a CIDR bitmask
979	<	* for IPv6 based glines
978	>	* gline_request_duration: how long a pending G-line can be around.
979	>	* 10 minutes should be plenty.
980		*/
981	<	gline_min_cidr6 = 48;
981	>	gline_request_duration = 10 minutes;
982
983		/*
984	<	* Whether to automatically set mode +i on connecting users.
984	>	* gline_min_cidr: the minimum required length of a CIDR bitmask
985	>	* for IPv4 based G-lines.
986		*/
987	<	invisible_on_connect = yes;
987	>	gline_min_cidr = 16;
988
989		/*
990	<	* If you don't explicitly specify burst_away in your connect blocks, then
991	<	* they will default to the burst_away value below.
990	>	* gline_min_cidr6: the minimum required length of a CIDR bitmask
991	>	* for IPv6 based G-lines.
992		*/
993	<	burst_away = no;
993	>	gline_min_cidr6 = 48;
994
995		/*
996	<	* Show "actually using host <ip>" on /whois when possible.
996	>	* invisible_on_connect: whether to automatically set mode +i on
997	>	* connecting users.
998		*/
999	<	use_whois_actually = yes;
999	>	invisible_on_connect = yes;
1000
1001		/*
1002	<	* Max time from the nickname change that still causes KILL
1003	<	* automatically to switch for the current nick of that user. (seconds)
1002	>	* kill_chase_time_limit: KILL chasing is a feature whereby a KILL
1003	>	* issued for a user who has recently changed nickname will be applied
1004	>	* automatically to the new nick. kill_chase_time_limit is the maximum
1005	>	* time following a nickname change that this chasing will apply.
1006		*/
1007	<	kill_chase_time_limit = 90;
1007	>	kill_chase_time_limit = 30 seconds;
1008
1009		/*
1010	<	* If hide_spoof_ips is disabled, opers will be allowed to see the real IP of spoofed
1011	<	* users in /trace etc.  If this is defined they will be shown a masked IP.
1010	>	* hide_spoof_ips: if disabled, opers will be allowed to see the real
1011	>	* IP address of spoofed users in /trace etc. If this is defined they
1012	>	* will be shown a masked IP.
1013		*/
1014		hide_spoof_ips = yes;
1015
1016		/*
1017	<	* Ignore bogus timestamps from other servers.  Yes, this will desync
1018	<	* the network, but it will allow chanops to resync with a valid non TS 0
1017	>	* ignore_bogus_ts: ignore bogus timestamps from other servers.
1018	>	* Yes, this will desync the network, but it will allow chanops
1019	>	* to resync with a valid non TS 0.
1020		*
1021		* This should be enabled network wide, or not at all.
1022		*/
#	Line 948 | Line 1028 | general {
1028		*/
1029		disable_auth = no;
1030
951	–	/* disable_remote_commands: disable users doing commands on remote servers */
952	–	disable_remote_commands = no;
953	–
1031		/*
1032		* tkline_expire_notices: enables or disables temporary kline/xline
1033		* expire notices.
#	Line 959 | Line 1036 | general {
1036
1037		/*
1038		* default_floodcount: the default value of floodcount that is configurable
1039	<	* via /quote set floodcount.  This is the amount of lines a user
1040	<	* may send to any other user/channel in one second.
1039	>	* via /quote set floodcount. This is the number of lines a user may send
1040	>	* to any other user/channel in one second.
1041		*/
1042		default_floodcount = 10;
1043
1044		/*
1045	<	* failed_oper_notice: send a notice to all opers on the server when
1045	>	* failed_oper_notice: send a notice to all opers on the server when
1046		* someone tries to OPER and uses the wrong password, host or ident.
1047		*/
1048		failed_oper_notice = yes;
1049
1050		/*
1051	<	* dots_in_ident: the amount of '.' characters permitted in an ident
1051	>	* dots_in_ident: the number of '.' characters permitted in an ident
1052		* reply before the user is rejected.
1053		*/
1054		dots_in_ident = 2;
1055
1056		/*
1057	<	* dot_in_ip6_addr: ircd-hybrid-6.0 and earlier will disallow hosts
1058	<	* without a '.' in them.  This will add one to the end.  Only needed
1059	<	* for older servers.
1060	<	*/
984	<	dot_in_ip6_addr = no;
985	<
986	<	/*
987	<	* min_nonwildcard: the minimum non wildcard characters in k/d/g lines
988	<	* placed via the server.  klines hand placed are exempt from limits.
989	<	* wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1057	>	* min_nonwildcard: the minimum number of non-wildcard characters in
1058	>	* k/d/g lines placed via the server. K-lines hand-placed are exempt from
1059	>	* this limit.
1060	>	* Wildcard characters: '.', ':', '*', '?', '@', '!'
1061		*/
1062		min_nonwildcard = 4;
1063
1064		/*
1065	<	* min_nonwildcard_simple: the minimum non wildcard characters in
1066	<	* gecos bans.  wildcard chars: '*' '?' '#'
1065	>	* min_nonwildcard_simple: the minimum number of non-wildcard characters
1066	>	* in gecos bans. Wildcard characters: '*', '?'
1067		*/
1068		min_nonwildcard_simple = 3;
1069
1070	<	/* max_accept: maximum allowed /accept's for +g usermode */
1000	<	max_accept = 20;
1001	<
1002	<	/* anti_nick_flood: enable the nickflood control code */
1070	>	/* anti_nick_flood: enable the nickflood control code. */
1071		anti_nick_flood = yes;
1072
1073	<	/* nick flood: the nick changes allowed in the specified period */
1073	>	/* nick flood: the number of nick changes allowed in the specified period. */
1074		max_nick_time = 20 seconds;
1075		max_nick_changes = 5;
1076
1077		/*
1078	<	* anti_spam_exit_message_time: the minimum time a user must be connected
1079	<	* before custom quit messages are allowed.
1078	>	* away_count, away_time: how many AWAY command are permitted per
1079	>	* client per away_time.
1080		*/
1081	<	anti_spam_exit_message_time = 5 minutes;
1081	>	away_count = 2;
1082	>	away_time = 10 seconds;
1083
1084		/*
1085	<	* ts delta: the time delta allowed between server clocks before
1086	<	* a warning is given, or before the link is dropped.  all servers
1018	<	* should run ntpdate/rdate to keep clocks in sync
1019	<	*/
1020	<	ts_warn_delta = 30 seconds;
1021	<	ts_max_delta = 5 minutes;
1022	<
1023	<	/*
1024	<	* kline_with_reason: show the user the reason why they are k/d/glined
1025	<	* on exit.  May give away who set k/dline when set via tcm.
1026	<	*/
1027	<	kline_with_reason = yes;
1028	<
1029	<	/*
1030	<	* kline_reason: show this message to users on channel
1031	<	* instead of the oper reason.
1085	>	* anti_spam_exit_message_time: the minimum time a user must be connected
1086	>	* before custom quit messages are allowed.
1087		*/
1088	<	kline_reason = "Connection closed";
1088	>	anti_spam_exit_message_time = 5 minutes;
1089
1090		/*
1091	<	* reject_hold_time: wait this amount of time before disconnecting
1092	<	* a rejected client. Use 0 to disable.
1091	>	* ts_warn_delta, ts_max_delta: the time delta allowed between server
1092	>	* clocks before a warning is given, or before the link is dropped.
1093	>	* All servers should run ntpdate/rdate to keep clocks in sync.
1094		*/
1095	<	reject_hold_time = 0;
1095	>	ts_warn_delta = 3 seconds;
1096	>	ts_max_delta = 15 seconds;
1097
1098		/*
1099	<	* warn_no_nline: warn opers about servers that try to connect but
1100	<	* we don't have a connect {} block for.  Twits with misconfigured
1101	<	* servers can get really annoying with this enabled.
1099	>	* warn_no_connect_block: warn opers about servers that try to connect
1100	>	* but for which we don't have a connect {} block. Twits with
1101	>	* misconfigured servers can become really annoying with this enabled.
1102		*/
1103	<	warn_no_nline = yes;
1103	>	warn_no_connect_block = yes;
1104
1105		/*
1106		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1107	<	* operators and administrators.  Doing so is a good idea in case
1108	<	* there are any exempted (exempt{}) server IPs you don't want to
1107	>	* operators and administrators. Doing so is a good idea in case
1108	>	* there are any exempted (exempt {}) server IPs you don't want to
1109		* see leaked.
1110		*/
1111		stats_e_disabled = no;
1112
1113	<	/* stats_o_oper only: make stats o (opers) oper only */
1113	>	/* stats_o_oper_only: make stats o (opers) oper only. */
1114		stats_o_oper_only = yes;
1115
1116	<	/* stats_P_oper_only: make stats P (ports) oper only */
1116	>	/* stats_P_oper_only: make stats P (ports) oper only. */
1117		stats_P_oper_only = yes;
1118
1119	+	/* stats_u_oper_only: make stats u (uptime) oper only. */
1120	+	stats_u_oper_only = no;
1121	+
1122		/*
1123	<	* stats i oper only: make stats i (auth {}) oper only. set to:
1124	<	*     yes:    show users no auth blocks, made oper only.
1125	<	*     masked: show users first matching auth block
1126	<	*     no:     show users all auth blocks.
1123	>	* stats_i_oper_only: make stats i (auth {}) oper only. Set to:
1124	>	*     yes    - show users no auth {} blocks, made oper only
1125	>	*     masked - show users the first matching auth {} block
1126	>	*     no     - show users all auth {} blocks
1127		*/
1128		stats_i_oper_only = yes;
1129
1130		/*
1131	<	* stats_k_oper_only: make stats k/K (klines) oper only.  set to:
1132	<	*     yes:    show users no auth blocks, made oper only
1133	<	*     masked: show users first matching auth block
1134	<	*     no:     show users all auth blocks.
1131	>	* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1132	>	*     yes    - show users no auth {} blocks, made oper only
1133	>	*     masked - show users the first matching auth {} block
1134	>	*     no     - show users all auth {} blocks
1135		*/
1136		stats_k_oper_only = yes;
1137
#	Line 1088 | Line 1148 | general {
1148		opers_bypass_callerid = no;
1149
1150		/*
1151	<	* pace_wait_simple: time between use of less intensive commands
1152	<	* (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1151	>	* pace_wait_simple: minimum time required between use of less
1152	>	* intensive commands
1153	>	* (ADMIN, HELP, LUSERS, VERSION, remote WHOIS)
1154		*/
1155		pace_wait_simple = 1 second;
1156
1157		/*
1158	<	* pace_wait: time between more intensive commands
1159	<	* (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1158	>	* pace_wait: minimum time required between use of more intensive commands
1159	>	* (INFO, LINKS, MAP, MOTD, STATS, WHO, WHOWAS)
1160		*/
1161		pace_wait = 10 seconds;
1162
1163		/*
1164	<	* short_motd: send clients a notice telling them to read the motd
1165	<	* instead of forcing a motd to clients who may simply ignore it.
1164	>	* short_motd: send clients a notice telling them to read the MOTD
1165	>	* instead of forcing an MOTD to clients who may simply ignore it.
1166		*/
1167		short_motd = no;
1168
1169		/*
1170	<	* ping_cookie: require clients to respond exactly to a ping command,
1170	>	* ping_cookie: require clients to respond exactly to a PING command,
1171		* can help block certain types of drones and FTP PASV mode spoofing.
1172		*/
1173		ping_cookie = no;
#	Line 1116 | Line 1177 | general {
1177
1178		/*
1179		* true_no_oper_flood: completely eliminate flood limits for opers
1180	<	* and for clients with can_flood = yes in their auth {} blocks
1180	>	* and for clients with 'can_flood' in their auth {} blocks.
1181		*/
1182		true_no_oper_flood = yes;
1183
1184	<	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1184	>	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1185		oper_pass_resv = yes;
1186
1187	<	/*
1127	<	* idletime: the maximum amount of time a user may idle before
1128	<	* they are disconnected
1129	<	*/
1130	<	idletime = 0;
1131	<
1132	<	/* REMOVE ME.  The following line checks you've been reading. */
1187	>	/* REMOVE ME. The following line checks that you have been reading. */
1188		havent_read_conf = 1;
1189
1190		/*
1191	<	* max_targets: the maximum amount of targets in a single
1192	<	* PRIVMSG/NOTICE.  Set to 999 NOT 0 for unlimited.
1191	>	* max_targets: the maximum number of targets in a single
1192	>	* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1193		*/
1194		max_targets = 4;
1195
1196		/*
1142	–	* client_flood: maximum amount of data in a clients queue before
1143	–	* they are dropped for flooding.
1144	–	*/
1145	–	client_flood = 2560 bytes;
1146	–
1147	–	/*
1148	–	* message_locale: the default message locale
1149	–	* Use "standard" for the compiled in defaults.
1150	–	* To install the translated messages, go into messages/ in the
1151	–	* source directory and run `make install'.
1152	–	*/
1153	–	message_locale = "standard";
1154	–
1155	–	/*
1197		* usermodes configurable: a list of usermodes for the options below
1198		*
1199		* +b - bots         - See bot and drone flooding notices
1200		* +c - cconn        - Client connection/quit notices
1201		* +D - deaf         - Don't receive channel messages
1202		* +d - debug        - See debugging notices
1203	<	* +f - full         - See I: line full notices
1203	>	* +e - external     - See remote server connection and split notices
1204	>	* +F - farconnect   - Remote client connection/quit notices
1205	>	* +f - full         - See auth {} block full notices
1206		* +G - softcallerid - Server Side Ignore for users not on your channels
1207		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1208	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
1209	<	*                     a channel
1208	>	* +H - hidden       - Hides operator status to other users
1209	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
1210	>	* +j - rej          - See rejected client notices
1211		* +k - skill        - See server generated KILL messages
1212		* +l - locops       - See LOCOPS messages
1213		* +n - nchange      - See client nick changes
1214	<	* +r - rej          - See rejected client notices
1214	>	* +p - hidechans    - Hides channel list in WHOIS
1215	>	* +q - hideidle     - Hides idle and signon time in WHOIS
1216	>	* +R - nononreg     - Only receive private messages from registered clients
1217		* +s - servnotice   - See general server notices
1218		* +u - unauth       - See unauthorized client notices
1219		* +w - wallop       - See server generated WALLOPS
1174	–	* +x - external     - See remote server connection and split notices
1220		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1176	–	* +z - operwall     - See oper generated WALLOPS
1177	–	*/
1178	–
1179	–	/* oper_only_umodes: usermodes only opers may set */
1180	–	oper_only_umodes = bots, cconn, cconn_full, debug, full, skill,
1181	–	nchange, rej, spy, external, operwall,
1182	–	locops, unauth;
1183	–
1184	–	/* oper_umodes: default usermodes opers get when they /oper */
1185	–	oper_umodes = bots, locops, servnotice, operwall, wallop;
1186	–
1187	–	/*
1188	–	* servlink_path: path to 'servlink' program used by ircd to handle
1189	–	* encrypted/compressed server <-> server links.
1190	–	*
1191	–	* only define if servlink is not in same directory as ircd itself.
1221		*/
1193	–	#servlink_path = "/usr/local/ircd/bin/servlink";
1222
1223	<	/*
1224	<	* default_cipher_preference: default cipher to use for cryptlink when none is
1225	<	* specified in connect block.
1198	<	*/
1199	<	#default_cipher_preference = "BF/168";
1223	>	/* oper_only_umodes: usermodes only operators may set. */
1224	>	oper_only_umodes = bots, cconn, debug, external, farconnect, full, hidden, locops,
1225	>	nchange, rej, skill, spy, unauth;
1226
1227	<	/*
1228	<	* use_egd: if your system does not have *random devices yet you
1203	<	* want to use OpenSSL and encrypted links, enable this.  Beware -
1204	<	* EGD is *very* CPU intensive when gathering data for its pool
1205	<	*/
1206	<	#       use_egd = yes;
1227	>	/* oper_umodes: default usermodes operators get when they /oper or /challenge. */
1228	>	oper_umodes = bots, locops, servnotice, wallop;
1229
1230		/*
1231	<	* egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1232	<	* which automatically finds the path.
1231	>	* throttle_count: the maximum number of connections from the same
1232	>	* IP address allowed in throttle_time duration.
1233		*/
1234	<	#       egdpool_path = "/var/run/egd-pool";
1213	<
1234	>	throttle_count = 1;
1235
1236		/*
1237	<	* compression_level: level of compression for compressed links between
1238	<	* servers.
1239	<	*
1240	<	* values are between: 1 (least compression, fastest)
1220	<	*                and: 9 (most compression, slowest).
1221	<	*/
1222	<	#       compression_level = 6;
1223	<
1224	<	/*
1225	<	* throttle_time: the minimum amount of time between connections from
1226	<	* the same ip.  exempt {} blocks are excluded from this throttling.
1227	<	* Offers protection against flooders who reconnect quickly.
1237	>	* throttle_time: the minimum amount of time required between
1238	>	* connections from the same IP address. exempt {} blocks are
1239	>	* excluded from this throttling.
1240	>	* Offers protection against flooders who reconnect quickly.
1241		* Set to 0 to disable.
1242		*/
1243	<	throttle_time = 10;
1243	>	throttle_time = 2 seconds;
1244		};
1245
1246	<	glines {
1234	<	/* enable: enable glines, network wide temp klines */
1235	<	enable = yes;
1236	<
1237	<	/*
1238	<	* duration: the amount of time a gline will remain on your
1239	<	* server before expiring
1240	<	*/
1241	<	duration = 1 day;
1242	<
1243	<	/*
1244	<	* logging: which types of rules you want to log when triggered
1245	<	* (choose reject or block)
1246	<	*/
1247	<	logging = reject, block;
1248	<
1246	>	modules {
1247		/*
1248	<	* NOTE: gline ACLs can cause a desync of glines throughout the
1249	<	* network, meaning some servers may have a gline triggered, and
1252	<	* others may not. Also, you only need insert rules for glines
1253	<	* that you want to block and/or reject. If you want to accept and
1254	<	* propagate the gline, do NOT put a rule for it.
1248	>	* path: other paths to search for modules specified below
1249	>	* and in "/module load".
1250		*/
1251	+	path = "lib/ircd-hybrid/modules";
1252	+	path = "lib/ircd-hybrid/modules/autoload";
1253
1254	<	/* user@host for rule to apply to */
1255	<	user = "god@I.still.hate.packets";
1259	<	/* server for rule to apply to */
1260	<	name = "hades.arpa";
1261	<
1262	<	/*
1263	<	* action: action to take when a matching gline is found. options are:
1264	<	*  reject      - do not apply the gline locally
1265	<	*  block       - do not propagate the gline
1266	<	*/
1267	<	action = reject, block;
1268	<
1269	<	user = "god@*";
1270	<	name = "*";
1271	<	action = block;
1254	>	/* module: the name of a module to load on startup/rehash. */
1255	>	#       module = "some_module.la";
1256		};
1257
1258	<	modules {
1259	<	/*
1260	<	* module path: other paths to search for modules specified below
1261	<	* and in /modload.
1262	<	*/
1263	<	path = "@datadir@/modules";
1280	<	path = "@datadir@/autoload";
1258	>	/*
1259	>	* log {}:  contains information about logfiles.
1260	>	*/
1261	>	log {
1262	>	/* Do you want to enable logging to ircd.log? */
1263	>	use_logging = yes;
1264
1265	<	/* module: the name of a module to load on startup/rehash */
1266	<	#module = "some_module.so";
1265	>	file {
1266	>	type = oper;
1267	>	name = "var/log/oper.log";
1268	>	size = unlimited;
1269	>	};
1270	>
1271	>	file {
1272	>	type = user;
1273	>	name = "var/log/user.log";
1274	>	size = 50 megabytes;
1275	>	};
1276	>
1277	>	file {
1278	>	type = kill;
1279	>	name = "var/log/kill.log";
1280	>	size = 50 megabytes;
1281	>	};
1282	>
1283	>	file {
1284	>	type = kline;
1285	>	name = "var/log/kline.log";
1286	>	size = 50 megabytes;
1287	>	};
1288	>
1289	>	file {
1290	>	type = dline;
1291	>	name = "var/log/dline.log";
1292	>	size = 50 megabytes;
1293	>	};
1294	>
1295	>	file {
1296	>	type = gline;
1297	>	name = "var/log/gline.log";
1298	>	size = 50 megabytes;
1299	>	};
1300	>
1301	>	file {
1302	>	type = xline;
1303	>	name = "var/log/xline.log";
1304	>	size = 50 megabytes;
1305	>	};
1306	>
1307	>	file {
1308	>	type = resv;
1309	>	name = "var/log/resv.log";
1310	>	size = 50 megabytes;
1311	>	};
1312	>
1313	>	file {
1314	>	type = debug;
1315	>	name = "var/log/debug.log";
1316	>	size = 50 megabytes;
1317	>	};
1318		};

Comparing:
ircd-hybrid-7.2/etc/example.conf.in (property svn:keywords), Revision 897 by db, Sat Nov 3 17:13:32 2007 UTC vs.
ircd-hybrid/trunk/doc/reference.conf (property svn:keywords), Revision 4436 by michael, Thu Aug 7 20:42:37 2014 UTC

#	Line 1 | Line 1
1	<	"Author Date Id Revision"
1	>	Id Revision

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)