ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/doc/reference.conf

Comparing ircd-hybrid/trunk/doc/reference.conf (file contents):
Revision 2322 by michael, Sun Jun 23 12:01:30 2013 UTC vs.
Revision 6668 by michael, Mon Oct 26 19:47:50 2015 UTC

#	Line 1 | Line 1
1	<	/* ircd-hybrid reference configuration file
2	<	* Copyright (C) 2000-2013 Hybrid Development Team
1	>	/*
2	>	* This is an example configuration file for ircd-hybrid
3		*
4	<	* Written by ejb, wcampbel, db, leeh and others
4	>	* Copyright (c) 2000-2015 ircd-hybrid development team
5		*
6		* $Id$
7		*/
#	Line 10 | Line 10
10		* ########################################################################
11		* IMPORTANT NOTE:
12		*
13	<	* auth {} blocks MUST be specified in order of precedence.  The first one
14	<	* that matches a user will be used.  So place spoofs first, then specials,
13	>	* auth {} blocks MUST be specified in order of precedence. The first one
14	>	* that matches a user will be used. So place spoofs first, then specials,
15		* then general access.
16		* ########################################################################
17		*
#	Line 23 | Line 23
23		*
24		* Times/durations are written as:
25		*        12 hours 30 minutes 1 second
26	<	*
26	>	*
27		* Valid units of time:
28		*        year, month, week, day, hour, minute, second
29		*
#	Line 39 | Line 39
39		*/
40		serverinfo {
41		/*
42	<	* name: the name of this server.  This cannot be changed at runtime.
42	>	* name: the name of this server. This cannot be changed at runtime.
43		*/
44	<	name = "hades.arpa";
44	>	name = "server.example.net";
45
46		/*
47	<	* sid: a server's unique ID.  This is three characters long and must
48	<	* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
47	>	* sid: a server's unique ID. This is three characters long and must
48	>	* be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	+	*
51		* NOTE: The letters must be capitalized. This cannot be changed at runtime.
52	+	*
53	+	* A sid is automatically generated at runtime, if you want to configure
54	+	* a specific sid, uncomment the following line.
55		*/
56	<	sid = "0HY";
56	>	#       sid = "0HY";
57
58		/*
59		* description: the description of the server.
#	Line 57 | Line 61 | serverinfo {
61		description = "ircd-hybrid test server";
62
63		/*
64	<	* network info: the name and description of the network this server
65	<	* is on. Shown in the 005 reply and used with serverhiding.
64	>	* network_name, network_desc: the name and description of the network this
65	>	* server is on. Shown in the 005 reply and used with serverhiding.
66		*/
67		network_name = "MyNet";
68		network_desc = "This is My Network";
#	Line 70 | Line 74 | serverinfo {
74		hub = no;
75
76		/*
77	<	* vhost: the IP to bind to when we connect outward to ipv4 servers.
78	<	* This should be an ipv4 IP only, or "*" for INADDR_ANY.
77	>	* vhost: the IP address to bind to when we connect outward to IPv4 servers.
78	>	* This should be an IPv4 address, or "*" for INADDR_ANY.
79		*/
80	<	#       vhost = "192.169.0.1";
80	>	#       vhost = "192.0.2.1";
81
82		/*
83	<	* vhost6: the address to bind to when we make outgoing connections
84	<	* to IPv6 servers. This should be an IPv6 address, or "*" for INADDR_ANY.
83	>	* vhost6: the IP address to bind to when we connect outward to IPv6 servers.
84	>	* This should be an IPv6 address, or "*" for in6addr_any.
85		*/
86	<	#       vhost6 = "3ffe:80e8:546::2";
86	>	#       vhost6 = "2001:DB8::1";
87
88	<	/* max_clients: the maximum number of clients allowed to connect. */
89	<	max_clients = 512;
88	>	/*
89	>	* default_max_clients: the default maximum number of clients allowed
90	>	* to connect. This can be changed from within IRC via /QUOTE SET MAX.
91	>	*/
92	>	default_max_clients = 512;
93
94		/*
95		* max_nick_length: only applies to local clients. Must be in the
#	Line 99 | Line 106 | serverinfo {
106
107		/*
108		* rsa_private_key_file: the path to the file containing the
109	<	* RSA key for cryptlink.
109	>	* RSA key.
110		*
111	<	* Example commands to store a 2048 bit RSA keypair in
105	<	* rsa.key, and the public key in rsa.pub:
111	>	* Example commands to store a 2048 bit RSA key in rsa.key:
112		*
113	<	*      openssl genrsa -out rsa.key 2048
114	<	*      openssl rsa -in rsa.key -pubout -out rsa.pub
115	<	*      chown <ircd-user>.<ircd.group> rsa.key rsa.pub
110	<	*      chmod 0600 rsa.key
111	<	*      chmod 0644 rsa.pub
113	>	*    openssl genrsa -out rsa.key 2048
114	>	*    chown <ircd-user>.<ircd.group> rsa.key
115	>	*    chmod 0600 rsa.key
116		*/
117	<	#       rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
117	>	#       rsa_private_key_file = "etc/rsa.key";
118
119		/*
120		* ssl_certificate_file: the path to the file containing our
#	Line 121 | Line 125 | serverinfo {
125		*
126		* Example command:
127		*
128	<	*      openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
125	<	*
126	<	* See http://www.openssl.org/docs/HOWTO/certificates.txt
128	>	*    openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
129		*
130		* Please use the following values when generating the cert
131		*
132	<	*      Organization Name: Network Name
133	<	*      Organization Unit Name: changme.someirc.net
134	<	*      Common Name: irc.someirc.net
135	<	*      E-mail: you@domain.com
132	>	*    Organization Name: Network Name
133	>	*    Organization Unit Name: unit.example.net
134	>	*    Common Name: irc.example.net
135	>	*    E-mail: email@example.net
136		*/
137	<	#       ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
137	>	#       ssl_certificate_file = "etc/cert.pem";
138
139		/*
140	<	* ssl_dh_param_file:
141	<	*
142	<	* Path to the PEM encoded Diffie-Hellman parameter file.
141	<	* DH parameters are required when using ciphers with EDH
142	<	* (ephemeral Diffie-Hellman) key exchange.
140	>	* ssl_dh_param_file: path to the PEM encoded Diffie-Hellman
141	>	* parameter file. DH parameters are required when using
142	>	* ciphers with EDH (ephemeral Diffie-Hellman) key exchange.
143		*
144		* A DH parameter file can be created by running:
145		*
146	<	*      openssl dhparam -out dhparam.pem 1024
146	>	*    openssl dhparam -out dhparam.pem 2048
147		*
148		* Prime size must be at least 1024 bits. Further information
149		* regarding specific OpenSSL dhparam command-line options
150		* can be found in the OpenSSL manual.
151		*/
152	<	#       ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
152	>	#       ssl_dh_param_file = "etc/dhparam.pem";
153
154		/*
155	<	* ssl_cipher_list:
155	>	* ssl_dh_elliptic_curve: defines the curve to use for the
156	>	* Elliptic Curve Diffie-Hellman (ECDH) algorithm.
157	>	* Default is ANSI X9.62 prime256v1/secp256r1 if nothing else is specified.
158	>	*
159	>	* A list of supported curves by OpenSSL can be obtained by running:
160		*
161	<	* List of ciphers to support on _this_ server. Can be used to
162	<	* enforce specific ciphers for incoming SSL/TLS connections.
163	<	* If a client (which also includes incoming server connections) is not
164	<	* capable of using any of the ciphers listed here, the connection will
161	>	*    openssl ecparam -list_curves
162	>	*/
163	>	#       ssl_dh_elliptic_curve = "secp521r1";
164	>
165	>	/*
166	>	* ssl_cipher_list: list of ciphers to support on _this_ server.
167	>	* Can be used to enforce specific ciphers for incoming SSL/TLS
168	>	* connections. If a client (which also includes incoming server connections)
169	>	* is not capable of using any of the ciphers listed here, the connection will
170		* simply be rejected.
171		*
172		* A list of supported ciphers by OpenSSL can be obtained by running:
173		*
174	<	*      openssl ciphers -ssl3 -tls1 -v
174	>	*    openssl ciphers -tls1 -v
175		*
176		* Multiple ciphers are separated by colons. The order of preference is
177		* from left to right.
178		*/
179	<	#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
179	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
180
181		/*
182	<	* ssl_server_method:
183	<	* ssl_client_method:
182	>	* ssl_message_digest_algorithm: defines what cryptographic hash function
183	>	* to use for generating fingerprint hashes of X.509 certificates.
184	>	* Default is SHA-256 if nothing else is specified.
185		*
186	<	* SSL/TLS methods we provide for incoming (server method) and
187	<	* outgoing (client method) SSL/TLS connections.
188	<	* This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
186	>	* A list of supported message digest algorithms by OpenSSL can be obtained by running:
187	>	*
188	>	*    openssl list-message-digest-algorithms
189		*/
190	<	#       ssl_server_method = tlsv1, sslv3;
181	<	#       ssl_client_method = tlsv1;
190	>	#       ssl_message_digest_algorithm = "sha256";
191		};
192
193		/*
194	<	* admin {}:  contains admin information about the server
194	>	* admin {}:  contains administrative information about the server
195		*/
196		admin {
197		name = "Smurf target";
198		description = "Main Server Administrator";
199	<	email = "<syn@packets.r.us>";
199	>	email = "<admin@server.example.net>";
200		};
201
202		/*
#	Line 205 | Line 214 | class {
214
215		/*
216		* number_per_ip: how many local users are allowed to connect
217	<	* from a single IP address  (optional)
217	>	* from a single IP address (optional)
218		*/
219		number_per_ip = 2;
220
221		/*
222		* max_local: how many local users are allowed to connect
223	<	* from a single ident@host  (optional)
223	>	* from a single ident@host (optional)
224		*/
225		max_local = 2;
226
227		/*
228	<	* max_global: network-wide limit of users per ident@host  (optional)
228	>	* max_global: network-wide limit of users per ident@host (optional)
229		*/
230		max_global = 10;
231
#	Line 226 | Line 235 | class {
235		max_number = 100;
236
237		/*
238	<	* the following lines are optional and allow you to define
238	>	* The following lines are optional and allow you to define
239		* how many users can connect from one /NN subnet.
240		*/
241		cidr_bitlen_ipv4 = 24;
#	Line 241 | Line 250 | class {
250
251		/*
252		* recvq: the amount of data allowed in a client's receive queue before
253	<	* they are dropped for flooding. Defaults to 2560 if the chosen
254	<	* value isn't within the range of 512 to 8000.
253	>	* they are dropped for flooding. Defaults to 2560 if the chosen value
254	>	* isn't within the range of 512 to 8000.
255		*/
256		recvq = 2560 bytes;
257		};
#	Line 255 | Line 264 | class {
264		sendq = 100 kbytes;
265
266		/*
267	<	* min_idle: minimum idle time that is shown in /whois.
267	>	* max_channels: maximum number of channels users in this class can join.
268	>	*/
269	>	max_channels = 60;
270	>
271	>	/*
272	>	* min_idle: minimum idle time that is shown in WHOIS.
273		*/
274		min_idle = 3 hours;
275
276		/*
277	<	* max_idle: maximum idle time that is shown in /whois.
277	>	* max_idle: maximum idle time that is shown in WHOIS.
278		*/
279		max_idle = 8 hours;
280
#	Line 298 | Line 312 | class {
312		motd {
313		/*
314		* mask: multiple mask entries are permitted. Mask can either be
315	<	* a class name or a hostname.
315	>	* a class name or a hostname. CIDR is supported.
316		*/
317		mask = "*.at";
318		mask = "*.de";
#	Line 307 | Line 321 | motd {
321		/*
322		* file: path to the actual motd file.
323		*/
324	<	file = "/usr/local/ircd/etc/german.motd";
324	>	file = "etc/german.motd";
325		};
326
327		/*
#	Line 315 | Line 329 | motd {
329		*/
330		listen {
331		/*
332	<	* port: the port to listen on. If no host is specified
333	<	* earlier in the listen {} block, it will listen on all available IPs.
332	>	* port: the port to listen on. If no host is specified earlier in the
333	>	* listen {} block, it will listen on all available IP addresses.
334		*
335	<	* Ports are separated by commsa; a range may be specified using ".."
335	>	* Ports are separated by commas; a range may be specified using ".."
336		*/
337	<
338	<	/* port: listen on all available IP addresses, ports 6665 to 6669 */
337	>
338	>	/* port: listen on all available IP addresses, ports 6665 to 6669. */
339		port = 6665 .. 6669;
340
341		/*
342	<	* Listen on 192.168.0.1/6697 with SSL enabled and hidden from STATS P
342	>	* Listen on 192.0.2.1/6697 with SSL enabled and hidden from STATS P
343		* unless you are an administrator.
344		*
345		* NOTE: The "flags" directive always has to come before "port".
#	Line 337 | Line 351 | listen {
351		*  hidden - Port is hidden from /stats P, unless you're an admin
352		*/
353		flags = hidden, ssl;
354	<	host = "192.168.0.1";
354	>	host = "192.0.2.2";
355		port = 6697;
356
357		/*
358	<	* host: set a specific IP address/host to listen on using the
358	>	* host: set a specific IP address to listen on using the
359		* subsequent port definitions. This may be IPv4 or IPv6.
360		*/
361	<	host = "1.2.3.4";
361	>	host = "192.0.2.3";
362		port = 7000, 7001;
363
364	<	host = "3ffe:1234:a:b:c::d";
364	>	host = "2001:DB8::2";
365		port = 7002;
366		};
367
#	Line 357 | Line 371 | listen {
371		auth {
372		/*
373		* user: the user@host allowed to connect. Multiple user
374	<	* lines are permitted within each auth block.
374	>	* lines are permitted within each auth {} block.
375		*/
376	<	user = "*@172.16.0.0/12";
377	<	user = "*test@123D:B567:*";
376	>	user = "*@192.0.2.0/24";
377	>	user = "*test@2001:DB8:*";
378
379	<	/* password: an optional password that is required to use this block */
379	>	/* password: an optional password that is required to use this block. */
380		password = "letmein";
381
382		/*
383		* encrypted: controls whether the auth password above has been
384	<	* encrypted.
384	>	* encrypted. Default is 'no' if nothing else is specified.
385		*/
386		encrypted = yes;
387
#	Line 377 | Line 391 | auth {
391		*/
392		spoof = "I.still.hate.packets";
393
394	<	/* class: the class the user is placed in */
394	>	/* class: the class the user is placed in. */
395		class = "opers";
396
397		/*
398	<	* need_password - don't allow users who haven't supplied the correct
399	<	*                 password to connect using another auth{} block
400	<	*                 ('&' prefix on /stats I if disabled)
387	<	* need_ident    - require the user to have identd to connect ('+' prefix on /stats I)
398	>	* need_password - don't allow users who haven't supplied the correct  | ('&' prefix on /stats I if disabled)
399	>	*                 password to connect using another auth {} block
400	>	* need_ident    - require the user to have identd to connect          | ('+' prefix on /stats I)
401		* spoof_notice  - enable spoofing notification to admins
402	<	* exceed_limit  - allow a user to exceed class limits ('>' prefix on /stats I)
403	<	* kline_exempt  - exempt this user from k/glines ('^' prefix on /stats I)
404	<	* gline_exempt  - exempt this user from glines ('_' prefix on /stats I)
405	<	* resv_exempt   - exempt this user from resvs ('$' prefix on /stats I)
406	<	* no_tilde      - remove ~ from a user with no ident ('-' prefix on /stats I)
407	<	* can_flood     - allow this user to exceed flood limits ('|' prefix on /stats I)
408	<	* webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
409	<	*                 ('<' prefix on /stats I)
402	>	* exceed_limit  - allow a user to exceed class limits                 | ('>' prefix on /stats I)
403	>	* kline_exempt  - exempt this user from k-lines                       | ('^' prefix on /stats I)
404	>	* xline_exempt  - exempt this user from x-lines                       | ('!' prefix on /stats I)
405	>	* resv_exempt   - exempt this user from resvs                         | ('$' prefix on /stats I)
406	>	* no_tilde      - remove ~ from a user with no ident                  | ('-' prefix on /stats I)
407	>	* can_flood     - allow this user to exceed flood limits              | ('|' prefix on /stats I)
408	>	* webirc        - enables WEBIRC authentication for web-based         | ('<' prefix on /stats I)
409	>	*                 clients such as Mibbit
410		*/
411		flags = need_password, spoof_notice, exceed_limit, kline_exempt,
412	<	gline_exempt, resv_exempt, no_tilde, can_flood;
412	>	xline_exempt, resv_exempt, no_tilde, can_flood;
413		};
414
415		auth {
416		/*
417	<	* redirect: the server and port to redirect a user to. A user does not
418	<	* have to obey the redirection; the ircd just suggests an alternative
419	<	* server for them.
417	>	* redirserv, redirport: the server and port to redirect a user to.
418	>	* A user does not have to obey the redirection; the ircd just
419	>	* suggests an alternative server for them.
420		*/
421	<	redirserv = "this.is.not.a.real.server";
421	>	redirserv = "server2.example.net";
422		redirport = 6667;
410	–
411	–	user = "*.server";
423
424	<	/* class: a class is required even though it is not used */
424	>	user = "*@*.ch";
425	>
426	>	/* class: a class is required even though it is not used. */
427		class = "users";
428		};
429
#	Line 424 | Line 437 | auth {
437		* operator {}:  defines ircd operators
438		*/
439		operator {
440	<	/* name: the name of the oper */
440	>	/* name: the name of the operator */
441		name = "sheep";
442
443		/*
444	<	* user: the user@host required for this operator. Multiple
445	<	* user="" lines are supported.
444	>	* user: the user@host required for this operator. Multiple user
445	>	* lines are permitted within each operator {} block.
446		*/
447	<	user = "*sheep@192.168.0.0/16";
448	<	user = "*@127.0.0.0/8";
447	>	user = "*sheep@192.0.2.0/26";
448	>	user = "*@192.0.2.240/28";
449
450		/*
451	<	* password: the password required to oper. By default this will
452	<	* need to be encrypted by using the provided mkpasswd tool.
453	<	* Several password hash algorithms are available depending
454	<	* on your system's crypt() implementation. For example, a modern
442	<	* glibc already has support for the SHA-256/512 and MD5 encryption
443	<	* algorithms.
451	>	* password: the password required to oper. By default this will need
452	>	* to be encrypted by using the provided mkpasswd tool.
453	>	* The availability of various password hashing algorithms may vary
454	>	* depending on the system's crypt(3) implementation.
455		*/
456		password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
457
458		/*
459		* encrypted: controls whether the oper password above has been
460	<	* encrypted.
460	>	* encrypted. Default is 'yes' if nothing else is specified.
461		*/
462		encrypted = yes;
463
464		/*
454	–	* rsa_public_key_file: the public key for this oper when using Challenge.
455	–	* A password should not be defined when this is used; see
456	–	* doc/challenge.txt for more information.
457	–	*/
458	–	#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
459	–
460	–	/*
465		* ssl_certificate_fingerprint: enhances security by additionally checking
466		* the oper's client certificate fingerprint against the specified
467		* fingerprint below.
#	Line 465 | Line 469 | operator {
469		* Hint: your users can use the following command to obtain a SHA-256 hash
470		* of their ssl certificate:
471		*
472	<	*      openssl x509 -sha256 -noout -fingerprint -in cert.pem | sed -e 's/^.*=//;s/://g'
472	>	*    openssl x509 -sha256 -noout -fingerprint -in cert.pem | sed -e 's/^.*=//;s/://g'
473		*/
474		#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
475
476		/*
477		* ssl_connection_required: client must be connected over SSL/TLS
478	<	* in order to be able to use this oper{} block.
478	>	* in order to be able to use this operator {} block.
479		* Default is 'no' if nothing else is specified.
480		*/
481		ssl_connection_required = no;
482
483	<	/* class: the class the oper joins when they successfully /oper */
483	>	/* class: the class the oper joins when they successfully OPER. */
484		class = "opers";
485
486		/*
487	<	* umodes: the default usermodes opers get when they /oper. If defined,
488	<	* it will override oper_umodes settings in general {}.
489	<	* Available usermodes:
487	>	* whois: allows to override the default RPL_WHOISOPERATOR numeric
488	>	* string shown in /whois.
489	>	* This string is propagated to all servers on the network.
490	>	*/
491	>	#       whois = "is a Smurf Target (IRC Operator)";
492	>
493	>	/*
494	>	* umodes: the default user modes opers get when they successfully OPER.
495	>	* If defined, it will override oper_umodes settings in general {}.
496	>	* Available user modes:
497		*
498		* +b - bots         - See bot and drone flooding notices
499		* +c - cconn        - Client connection/quit notices
#	Line 490 | Line 501 | operator {
501		* +d - debug        - See debugging notices
502		* +e - external     - See remote server connection and split notices
503		* +F - farconnect   - Remote client connection/quit notices
504	<	* +f - full         - See auth{} block full notices
504	>	* +f - full         - See auth {} block full notices
505		* +G - softcallerid - Server Side Ignore for users not on your channels
506		* +g - callerid     - Server Side Ignore (for privmsgs etc)
507		* +H - hidden       - Hides operator status to other users
#	Line 499 | Line 510 | operator {
510		* +k - skill        - See server generated KILL messages
511		* +l - locops       - See LOCOPS messages
512		* +n - nchange      - See client nick changes
513	+	* +p - hidechans    - Hides channel list in WHOIS
514	+	* +q - hideidle     - Hides idle and signon time in WHOIS
515		* +R - nononreg     - Only receive private messages from registered clients
516		* +s - servnotice   - See general server notices
517		* +u - unauth       - See unauthorized client notices
518		* +w - wallop       - See server generated WALLOPS
519		* +y - spy          - See LINKS, STATS, TRACE notices etc.
507	–	* +z - operwall     - See oper generated WALLOPS
520		*/
521	<	umodes = locops, servnotice, operwall, wallop;
521	>	umodes = locops, servnotice, wallop;
522
523		/*
524	<	* privileges: controls the activities and commands an oper is
525	<	* allowed to do on the server. All options default to no.
526	<	* Available options:
524	>	* flags: controls the activities and commands an oper is
525	>	* allowed to do on the server. All flags default to 'no'.
526	>	* Available flags:
527		*
528	<	* module         - allows MODULE
528	>	* admin          - gives administrator privileges    | ('A' flag)
529	>	* close          - allows CLOSE
530		* connect        - allows local CONNECT              | ('P' flag)
531		* connect:remote - allows remote CONNECT             | ('Q' flag)
532	<	* squit          - allows local SQUIT                | ('R' flag)
533	<	* squit:remote   - allows remote SQUIT               | ('S' flag)
532	>	* die            - allows DIE                        | ('D' flag)
533	>	* dline          - allows DLINE                      |
534	>	* globops        - allows GLOBOPS                    |
535	>	* join:resv      - allows to JOIN resv {} channels
536		* kill           - allows to KILL local clients      | ('N' flag)
537		* kill:remote    - allows remote users to be /KILL'd | ('O' flag)
523	–	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
524	–	* dline          - allows DLINE                      |
525	–	* undline        - allows UNDLINE                    |
538		* kline          - allows KLINE                      | ('K' flag)
527	–	* unkline        - allows UNKLINE                    | ('U' flag)
528	–	* gline          - allows GLINE                      | ('G' flag)
529	–	* xline          - allows XLINE                      | ('X' flag)
539		* locops         - allows LOCOPS                     |
540	<	* globops        - allows GLOBOPS                    |
541	<	* wallops        - allows WALLOPS                    |
542	<	* operwall       - allows OPERWALL                   | ('L' flag)
540	>	* module         - allows MODULE                     |
541	>	* nick:resv      - allows to use NICK on resv {} nicks
542	>	* opme           - allows OPME                       |
543		* rehash         - allows oper to REHASH config      | ('H' flag)
544	<	* die            - allows DIE                        | ('D' flag)
544	>	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
545		* restart        - allows RESTART                    |
546	+	* resv           - allows RESV
547		* set            - allows SET                        |
548	<	* admin          - gives administrator privileges    | ('A' flag)
548	>	* squit          - allows local SQUIT                | ('R' flag)
549	>	* squit:remote   - allows remote SQUIT               | ('S' flag)
550	>	* undline        - allows UNDLINE                    |
551	>	* unkline        - allows UNKLINE                    | ('U' flag)
552	>	* unresv         - allows UNRESV
553	>	* unxline        - allows UNXLINE                    |
554	>	* wallops        - allows WALLOPS                    |
555	>	* xline          - allows XLINE                      | ('X' flag)
556		*/
557	<	flags = kill, kill:remote, connect, connect:remote, kline, unkline,
558	<	xline, globops, restart, die, rehash, admin, operwall, module;
542	<	};
543	<
544	<	/*
545	<	* service {}: specifies a server which may act as a network service
546	<	*
547	<	* NOTE: it is very important that every server on the network
548	<	*       has the same service{} block.
549	<	*/
550	<	service {
551	<	name = "service.someserver";
552	<	name = "stats.someserver";
557	>	flags = admin, connect, connect:remote, die, globops, kill, kill:remote,
558	>	kline, module, rehash, restart, set, unkline, unxline, xline;
559		};
560
561		/*
562		* connect {}: define a server to connect to
563		*/
564		connect {
565	<	/* name: the name of the server */
566	<	name = "irc.uplink.com";
565	>	/* name: the name of the server. */
566	>	name = "uplink.example.net";
567
568		/*
569		* host: the host or IP address to connect to. If a hostname is used it
570		* must match the reverse DNS of the server.
571		*/
572	<	host = "192.168.0.1";
572	>	host = "192.0.2.4";
573
574		/*
575		* vhost: the IP address to bind to when making outgoing connections to
#	Line 571 | Line 577 | connect {
577		* serverinfo::vhost and serverinfo::vhost6 will be overridden
578		* by this directive.
579		*/
580	<	vhost = "192.168.0.2";
580	>	vhost = "192.0.2.5";
581
582		/*
583	<	* passwords: the passwords to send (OLD C:) and accept (OLD N:).
583	>	* send_password, accept_password: the passwords to send and accept.
584		* The remote server will have these passwords swapped.
585		*/
586		send_password = "password";
#	Line 586 | Line 592 | connect {
592		*/
593		encrypted = no;
594
595	<	/* port: the port to connect to this server on */
595	>	/* port: the port to connect to this server on. */
596		port = 6666;
597
598		/*
#	Line 601 | Line 607 | connect {
607		*/
608		#       leaf_mask = "*.uk";
609
610	<	/* class: the class this server is in */
610	>	/* class: the class this server is in. */
611		class = "server";
612
613		/*
614	<	* ssl_cipher_list:
615	<	*
616	<	* List of ciphers that the server we are connecting to must support.
611	<	* If the server is not capable of using any of the ciphers listed below,
612	<	* the connection will simply be rejected.
614	>	* ssl_cipher_list: list of ciphers that the server we are connecting to
615	>	* must support. If the server is not capable of using any of the ciphers
616	>	* listed below, the connection will simply be rejected.
617		* Can be used to enforce stronger ciphers, even though this option
618		* is not necessarily required to establish a SSL/TLS connection.
619		*
620		* Multiple ciphers are separated by colons. The order of preference
621		* is from left to right.
622		*/
623	<	#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
623	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
624
625		/*
626		* ssl_certificate_fingerprint: enhances security by additionally checking
#	Line 634 | Line 638 | connect {
638		};
639
640		connect {
641	<	name = "ipv6.some.server";
642	<	host = "3ffd:dead:beef::1";
641	>	name = "ipv6.example.net";
642	>	host = "2001:DB8::3";
643		send_password = "password";
644		accept_password = "password";
645		port = 6666;
#	Line 661 | Line 665 | cluster {
665		*       will not be propagated to clustered servers.
666		*
667		*       Remote servers are not necessarily required to accept
668	<	*       clustered lines, they need a shared{} for *THIS* server
669	<	*       in order to accept them.
668	>	*       clustered lines, they need a shared {} block for *THIS*
669	>	*       server in order to accept them.
670		*/
671	<	name = "*.arpa";
671	>	name = "*.example.net";
672
673		/*
674		* type: list of what to share; options are as follows:
#	Line 696 | Line 700 | shared {
700		* If this is not specified, the user will be allowed to kline from all
701		* servers.
702		*/
703	<	name = "irc2.some.server";
703	>	name = "irc2.example.net";
704
705		/*
706		* user: the user@host mask that is allowed to set klines. If this is
#	Line 723 | Line 727 | shared {
727
728		/*
729		* kill {}:  users that are not allowed to connect
730	<	* Oper issued klines will be added to the specified kline config
730	>	* Oper issued klines will be added to the specified kline database
731		*/
732		kill {
733	<	user = "bad@*.hacked.edu";
733	>	user = "bad@*.example.net";
734		reason = "Obviously hacked account";
735		};
736
737		/*
738		* deny {}:  IP addresses that are not allowed to connect
739		* (before DNS/ident lookup)
740	<	* Oper issued dlines will be added to the specified dline config
740	>	* Oper issued dlines will be added to the specified dline database
741		*/
742		deny {
743	<	ip = "10.0.1.0/24";
743	>	ip = "192.0.2.0/28";
744		reason = "Reconnecting vhosted bots";
745		};
746
#	Line 744 | Line 748 | deny {
748		* exempt {}:  IP addresses that are exempt from deny {} and Dlines
749		*/
750		exempt {
751	<	ip = "192.168.0.0/16";
751	>	ip = "192.0.2.240/28";
752		};
753
754		/*
755		* resv {}:  nicks and channels users may not use/join
756		*/
757		resv { mask = "clone*"; reason = "Clone bots"; };
758	+	resv { mask = "Global"; reason = "Reserved for services"; };
759		resv { mask = "ChanServ"; reason = "Reserved for services"; };
760		resv { mask = "NickServ"; reason = "Reserved for services"; };
761		resv { mask = "OperServ"; reason = "Reserved for services"; };
#	Line 767 | Line 772 | resv {
772		* as channel name masks.
773		*/
774		mask = "#helsinki";
775	<	reason = "Channel is reserved for finnish inhabitants";
775	>	reason = "Channel is reserved for Finnish inhabitants";
776
777		/*
778		* exempt: can be either a ISO 3166 alpha-2 two letter country
#	Line 778 | Line 783 | resv {
783		};
784
785		/*
786	<	* gecos {}:  Used for banning users based on their "realname".
786	>	* gecos {}:  used for banning users based on their "realname".
787		*/
788		gecos {
789		name = "*sex*";
#	Line 791 | Line 796 | gecos {
796		};
797
798		/*
799	<	* channel {}:  The channel block contains options pertaining to channels
799	>	* service {}: specifies a server which may act as a network service
800	>	*
801	>	* NOTE: it is very important that every server on the network
802	>	*       has the same service {} block.
803	>	*/
804	>	service {
805	>	name = "service.example.net";
806	>	name = "stats.example.net";
807	>	};
808	>
809	>	/*
810	>	* pseudo {}: adds pseudo/custom commands also known as service aliases
811	>	*/
812	>	pseudo {
813	>	/* command: the actual command/alias. */
814	>	command = "IDENTIFY";
815	>
816	>	/* prepend: optional text that can be prepended before the user's message. */
817	>	prepend = "IDENTIFY ";
818	>
819	>	/* name: the service name, used for error messages. */
820	>	name = "NickServ";
821	>
822	>	/* target: the actual target where this message should be sent to. */
823	>	target = "NickServ@service.example.net";
824	>	};
825	>
826	>	pseudo {
827	>	command = "CHANSERV";
828	>	name = "ChanServ";
829	>	target = "ChanServ@service.example.net";
830	>	};
831	>
832	>	pseudo {
833	>	command = "CS";
834	>	name = "ChanServ";
835	>	target = "ChanServ@service.example.net";
836	>	};
837	>
838	>	pseudo {
839	>	command = "NICKSERV";
840	>	name = "NickServ";
841	>	target = "NickServ@service.example.net";
842	>	};
843	>
844	>	pseudo {
845	>	command = "NS";
846	>	name = "NickServ";
847	>	target = "NickServ@service.example.net";
848	>	};
849	>
850	>	pseudo {
851	>	command = "MEMOSERV";
852	>	name = "MemoServ";
853	>	target = "MemoServ@service.example.net";
854	>	};
855	>
856	>	pseudo {
857	>	command = "MS";
858	>	name = "MemoServ";
859	>	target = "MemoServ@service.example.net";
860	>	};
861	>
862	>	pseudo {
863	>	command = "OPERSERV";
864	>	name = "OperServ";
865	>	target = "OperServ@service.example.net";
866	>	};
867	>
868	>	pseudo {
869	>	command = "OS";
870	>	name = "OperServ";
871	>	target = "OperServ@service.example.net";
872	>	};
873	>
874	>	pseudo {
875	>	command = "HOSTSERV";
876	>	name = "HostServ";
877	>	target = "HostServ@service.example.net";
878	>	};
879	>
880	>	pseudo {
881	>	command = "HS";
882	>	name = "HostServ";
883	>	target = "HostServ@service.example.net";
884	>	};
885	>
886	>	pseudo {
887	>	command = "BOTSERV";
888	>	name = "BotServ";
889	>	target = "BotServ@service.example.net";
890	>	};
891	>
892	>	pseudo {
893	>	command = "BS";
894	>	name = "BotServ";
895	>	target = "BotServ@service.example.net";
896	>	};
897	>
898	>	/*
899	>	* channel {}:  the channel block contains options pertaining to channels
900		*/
901		channel {
902		/*
#	Line 810 | Line 915 | channel {
915		disable_fake_channels = yes;
916
917		/*
918	<	* knock_delay: The amount of time a user must wait between issuing
919	<	* the knock command.
918	>	* invite_client_count, invite_client_time: how many INVITE commands
919	>	* are permitted per client per invite_client_time.
920		*/
921	<	knock_delay = 5 minutes;
921	>	invite_client_count = 10;
922	>	invite_client_time = 5 minutes;
923
924		/*
925	<	* knock_delay_channel: How often a knock to any specific channel
926	<	* is permitted, regardless of the user sending the knock.
925	>	* knock_client_count, knock_client_time: how many KNOCK commands
926	>	* are permitted per client per knock_client_time.
927		*/
928	<	knock_delay_channel = 1 minute;
928	>	knock_client_count = 1;
929	>	knock_client_time = 5 minutes;
930
931		/*
932	<	* max_chans_per_user: The maximum number of channels a user can
933	<	* join/be on.
932	>	* knock_delay_channel: how often a KNOCK to any specific channel
933	>	* is permitted, regardless of the user sending the KNOCK.
934		*/
935	<	max_chans_per_user = 25;
935	>	knock_delay_channel = 1 minute;
936
937		/*
938	<	* max_chans_per_oper: The maximum number of channels an oper can
939	<	* join/be on.
938	>	* max_channels: the maximum number of channels a user can join/be on.
939	>	* This is a default value which can be overriden with class {} blocks.
940		*/
941	<	max_chans_per_oper = 50;
941	>	max_channels = 25;
942
943	<	/* max_bans: maximum number of +b/e/I modes in a channel */
943	>	/* max_bans: maximum number of +b/e/I modes in a channel. */
944		max_bans = 100;
945
946		/*
947	<	* how many joins in how many seconds constitute a flood. Use 0 to
948	<	* disable. +b opers will be notified (changeable via /set)
949	<	*/
950	<	join_flood_count = 16;
844	<	join_flood_time = 8 seconds;
845	<
846	<	/*
847	<	* The ircd will now check splitmode (whether a server is split from
848	<	* the network) every few seconds; this functionality is known as
849	<	* splitcode and is influenced by the options below.
850	<	*
851	<	* Either split users or split servers can activate splitmode, but
852	<	* both conditions must be met for the ircd to deactivate splitmode.
853	<	*
854	<	* You may force splitmode to be permanent by /quote set splitmode on
855	<	*/
856	<
857	<	/*
858	<	* default_split_user_count: when the usercount is lower than this level,
859	<	* consider ourselves split. This must be set for automatic splitmode.
947	>	* default_join_flood_count, default_join_flood_time:
948	>	* how many joins in how many seconds constitute a flood. Use 0 to disable.
949	>	* +b opers will be notified. These are only default values which can be
950	>	* changed via "/QUOTE SET JFLOODCOUNT" and "/QUOTE SET JFLOODTIME".
951		*/
952	<	default_split_user_count = 0;
953	<
863	<	/*
864	<	* default_split_server_count: when the servercount is lower than this,
865	<	* consider ourselves split. This must be set for automatic splitmode.
866	<	*/
867	<	default_split_server_count = 0;
868	<
869	<	/* no_create_on_split: do not allow users to create channels on split. */
870	<	no_create_on_split = yes;
871	<
872	<	/* no_join_on_split: do not allow users to join channels on a split. */
873	<	no_join_on_split = no;
952	>	default_join_flood_count = 18;
953	>	default_join_flood_time = 6 seconds;
954		};
955
956		/*
957	<	* serverhide {}:  The serverhide block contains the options regarding
958	<	* to server hiding
957	>	* serverhide {}:  the serverhide block contains the options regarding
958	>	* to server hiding. For more information regarding server hiding,
959	>	* please see doc/serverhide.txt
960		*/
961		serverhide {
962		/*
#	Line 891 | Line 972 | serverhide {
972		flatten_links = no;
973
974		/*
975	<	* links_delay: how often to update the links file when it is
975	>	* flatten_links_delay: how often to update the links file when it is
976		* flattened.
977		*/
978	<	links_delay = 5 minutes;
978	>	flatten_links_delay = 5 minutes;
979	>
980	>	/*
981	>	* flatten_links_file: path to the flatten links cache file.
982	>	*/
983	>	flatten_links_file = "var/lib/links.txt";
984
985		/*
986		* hidden: hide this server from a /links output on servers that
#	Line 910 | Line 996 | serverhide {
996
997		/*
998		* hide_services: define this if you want to hide the location of
999	<	* services servers that are specified in the service{} block.
999	>	* services servers that are specified in the service {} block.
1000		*/
1001		hide_services = no;
1002
1003		/*
1004	<	* Use this as the servername users see if hide_servers = yes.
1004	>	* hidden_name: use this as the servername users see if hide_servers = yes.
1005		*/
1006	<	hidden_name = "*.hidden.com";
1006	>	hidden_name = "*.example.net";
1007
1008		/*
1009	<	* hide_server_ips: If this is disabled, opers will be unable to see
1009	>	* hide_server_ips: if this is disabled, opers will be unable to see
1010		* servers' IP addresses and will be shown a masked IP address; admins
1011		* will be shown the real IP address.
1012		*
#	Line 935 | Line 1021 | serverhide {
1021		};
1022
1023		/*
1024	<	* general {}:  The general block contains many of the options that were once
1024	>	* general {}:  the general block contains many of the options that were once
1025		* compiled in options in config.h
1026		*/
1027		general {
#	Line 945 | Line 1031 | general {
1031		*/
1032		cycle_on_host_change = yes;
1033
948	–	/* services_name: servername of nick/channel services */
949	–	services_name = "service.someserver";
950	–
1034		/* max_watch: maximum WATCH entries a client can have. */
1035	<	max_watch = 60;
1035	>	max_watch = 30;
1036
1037	<	/* gline_enable: enable glines (network-wide temporary klines). */
1038	<	gline_enable = yes;
1037	>	/* max_accept: maximum allowed /accept's for +g user mode. */
1038	>	max_accept = 30;
1039
1040		/*
1041	<	* gline_duration: the amount of time a gline will remain on your
1042	<	* server before expiring.
1041	>	* dline_min_cidr: the minimum required length of a CIDR bitmask
1042	>	* for IPv4 based D-lines.
1043		*/
1044	<	gline_duration = 1 day;
1044	>	dline_min_cidr = 16;
1045
1046		/*
1047	<	* gline_request_duration: how long a pending G-line can be around.
1048	<	* 10 minutes should be plenty.
1047	>	* dline_min_cidr6: the minimum required length of a CIDR bitmask
1048	>	* for IPv6 based D-lines.
1049		*/
1050	<	gline_request_duration = 10 minutes;
1050	>	dline_min_cidr6 = 48;
1051
1052		/*
1053	<	* gline_min_cidr: the minimum required length of a CIDR bitmask
1054	<	* for IPv4 based glines.
1053	>	* kline_min_cidr: the minimum required length of a CIDR bitmask
1054	>	* for IPv4 based K-lines.
1055		*/
1056	<	gline_min_cidr = 16;
1056	>	kline_min_cidr = 16;
1057
1058		/*
1059	<	* gline_min_cidr6: the minimum required length of a CIDR bitmask
1060	<	* for IPv6 based glines.
1059	>	* kline_min_cidr6: the minimum required length of a CIDR bitmask
1060	>	* for IPv6 based K-lines.
1061		*/
1062	<	gline_min_cidr6 = 48;
1062	>	kline_min_cidr6 = 48;
1063
1064		/*
1065	<	* Whether to automatically set mode +i on connecting users.
1065	>	* invisible_on_connect: whether to automatically set user mode +i
1066	>	* on connecting users.
1067		*/
1068		invisible_on_connect = yes;
1069
#	Line 989 | Line 1073 | general {
1073		* automatically to the new nick. kill_chase_time_limit is the maximum
1074		* time following a nickname change that this chasing will apply.
1075		*/
1076	<	kill_chase_time_limit = 90 seconds;
1076	>	kill_chase_time_limit = 30 seconds;
1077
1078		/*
1079	<	* hide_spoof_ips: if disabled, opers will be allowed to see the real
1080	<	* IP address of spoofed users in /trace etc. If this is defined they
1081	<	* will be shown a masked IP.
998	<	*/
999	<	hide_spoof_ips = yes;
1000	<
1001	<	/*
1002	<	* Ignore bogus timestamps from other servers. Yes, this will desync the
1003	<	* network, but it will allow chanops to resync with a valid non TS 0
1079	>	* ignore_bogus_ts: ignore bogus timestamps from other servers.
1080	>	* Yes, this will desync the network, but it will allow chanops
1081	>	* to resync with a valid non TS 0.
1082		*
1083		* This should be enabled network wide, or not at all.
1084		*/
#	Line 1008 | Line 1086 | general {
1086
1087		/*
1088		* disable_auth: completely disable ident lookups; if you enable this,
1089	<	* be careful of what you set need_ident to in your auth {} blocks
1089	>	* be careful of what you set need_ident to in your auth {} blocks.
1090		*/
1091		disable_auth = no;
1092
#	Line 1020 | Line 1098 | general {
1098
1099		/*
1100		* default_floodcount: the default value of floodcount that is configurable
1101	<	* via /quote set floodcount. This is the number of lines a user
1102	<	* may send to any other user/channel in one second.
1101	>	* via /quote set floodcount. This is the number of lines a user may send
1102	>	* to any other user/channel in one second. Set to 0 to disable.
1103		*/
1104		default_floodcount = 10;
1105
#	Line 1039 | Line 1117 | general {
1117
1118		/*
1119		* min_nonwildcard: the minimum number of non-wildcard characters in
1120	<	* k/d/g lines placed via the server. K-lines hand-placed are exempt from
1120	>	* k/d lines placed via the server. K-lines hand-placed are exempt from
1121		* this limit.
1122	<	* Wildcard chars: '.', ':', '*', '?', '@', '!'
1122	>	* Wildcard characters: '.', ':', '*', '?'
1123		*/
1124		min_nonwildcard = 4;
1125
1126		/*
1127		* min_nonwildcard_simple: the minimum number of non-wildcard characters
1128	<	* in gecos bans. Wildcard chars: '*', '?'
1128	>	* in gecos bans. Wildcard characters: '*', '?'
1129		*/
1130		min_nonwildcard_simple = 3;
1131
1054	–	/* max_accept: maximum allowed /accept's for +g usermode. */
1055	–	max_accept = 20;
1056	–
1132		/* anti_nick_flood: enable the nickflood control code. */
1133		anti_nick_flood = yes;
1134
1135	<	/* nick flood: the number of nick changes allowed in the specified period */
1136	<	max_nick_time = 20 seconds;
1135	>	/*
1136	>	* max_nick_changes, max_nick_time: the number of nick changes allowed in
1137	>	* the specified period.
1138	>	*/
1139		max_nick_changes = 5;
1140	+	max_nick_time = 20 seconds;
1141	+
1142	+	/*
1143	+	* away_count, away_time: how many AWAY command are permitted per
1144	+	* client per away_time.
1145	+	*/
1146	+	away_count = 2;
1147	+	away_time = 10 seconds;
1148
1149		/*
1150		* anti_spam_exit_message_time: the minimum time a user must be connected
#	Line 1068 | Line 1153 | general {
1153		anti_spam_exit_message_time = 5 minutes;
1154
1155		/*
1156	<	* ts delta: the time delta allowed between server clocks before
1157	<	* a warning is given, or before the link is dropped. All servers
1158	<	* should run ntpdate/rdate to keep clocks in sync
1156	>	* ts_warn_delta, ts_max_delta: the time delta allowed between server
1157	>	* clocks before a warning is given, or before the link is dropped.
1158	>	* All servers should run ntpdate/rdate to keep clocks in sync.
1159		*/
1160	<	ts_warn_delta = 30 seconds;
1161	<	ts_max_delta = 5 minutes;
1160	>	ts_warn_delta = 3 seconds;
1161	>	ts_max_delta = 15 seconds;
1162
1163		/*
1164	<	* warn_no_nline: warn opers about servers that try to connect but
1165	<	* for which we don't have a connect {} block. Twits with misconfigured
1166	<	* servers can become really annoying with this enabled.
1164	>	* warn_no_connect_block: warn opers about servers that try to connect
1165	>	* but for which we don't have a connect {} block. Twits with
1166	>	* misconfigured servers can become really annoying with this enabled.
1167		*/
1168	<	warn_no_nline = yes;
1168	>	warn_no_connect_block = yes;
1169
1170		/*
1171		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1172		* operators and administrators. Doing so is a good idea in case
1173	<	* there are any exempted (exempt{}) server IPs you don't want to
1174	<	* see leaked.
1173	>	* there are any exempted (exempt {}) server IP addresses you don't
1174	>	* want to see leaked.
1175		*/
1176		stats_e_disabled = no;
1177
1178	<	/* stats_o_oper only: make stats o (opers) oper only */
1178	>	/* stats_m_oper_only: make /stats m/M (messages) oper only. */
1179	>	stats_m_oper_only = yes;
1180	>
1181	>	/* stats_o_oper_only: make stats o (opers) oper only. */
1182		stats_o_oper_only = yes;
1183
1184	<	/* stats_P_oper_only: make stats P (ports) oper only */
1184	>	/* stats_P_oper_only: make stats P (ports) oper only. */
1185		stats_P_oper_only = yes;
1186
1187	<	/* stats_u_oper_only: make stats u (uptime) oper only */
1187	>	/* stats_u_oper_only: make stats u (uptime) oper only. */
1188		stats_u_oper_only = no;
1189
1190		/*
1191	<	* stats i oper only: make stats i (auth {}) oper only. Set to:
1192	<	*     yes    - show users no auth blocks, made oper only.
1193	<	*     masked - show users the first matching auth block
1194	<	*     no     - show users all auth blocks.
1191	>	* stats_i_oper_only: make stats i (auth {}) oper only. Set to:
1192	>	*     yes    - show users no auth {} blocks, made oper only
1193	>	*     masked - show users the first matching auth {} block
1194	>	*     no     - show users all auth {} blocks
1195		*/
1196		stats_i_oper_only = yes;
1197
1198		/*
1199		* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1200	<	*     yes    - show users no auth blocks, made oper only
1201	<	*     masked - show users the first matching auth block
1202	<	*     no     - show users all auth blocks.
1200	>	*     yes    - show users no klines, made oper only
1201	>	*     masked - show users the first matching kline
1202	>	*     no     - show users all klines
1203		*/
1204		stats_k_oper_only = yes;
1205
#	Line 1123 | Line 1211 | general {
1211
1212		/*
1213		* opers_bypass_callerid: allows operators to bypass +g and message
1214	<	* anyone who has it set (useful if you use services).
1214	>	* anyone who has it set.
1215		*/
1216		opers_bypass_callerid = no;
1217
1218		/*
1219		* pace_wait_simple: minimum time required between use of less
1220		* intensive commands
1221	<	* (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1221	>	* (ADMIN, HELP, LUSERS, VERSION, remote WHOIS)
1222		*/
1223		pace_wait_simple = 1 second;
1224
1225		/*
1226		* pace_wait: minimum time required between use of more intensive commands
1227	<	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1227	>	* (INFO, LINKS, MAP, MOTD, STATS, WHO, WHOWAS)
1228		*/
1229		pace_wait = 10 seconds;
1230
#	Line 1147 | Line 1235 | general {
1235		short_motd = no;
1236
1237		/*
1238	<	* ping_cookie: require clients to respond exactly to a ping command,
1238	>	* ping_cookie: require clients to respond exactly to a PING command,
1239		* can help block certain types of drones and FTP PASV mode spoofing.
1240		*/
1241		ping_cookie = no;
#	Line 1156 | Line 1244 | general {
1244		no_oper_flood = yes;
1245
1246		/*
1159	–	* true_no_oper_flood: completely eliminate flood limits for opers
1160	–	* and for clients with can_flood = yes in their auth {} blocks.
1161	–	*/
1162	–	true_no_oper_flood = yes;
1163	–
1164	–	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1165	–	oper_pass_resv = yes;
1166	–
1167	–	/* REMOVE ME.  The following line checks that you have been reading. */
1168	–	havent_read_conf = 1;
1169	–
1170	–	/*
1247		* max_targets: the maximum number of targets in a single
1248		* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1249		*/
1250		max_targets = 4;
1251
1252		/*
1253	<	* usermodes configurable: a list of usermodes for the options below
1253	>	* user modes configurable: a list of user modes for the options below
1254		*
1255		* +b - bots         - See bot and drone flooding notices
1256		* +c - cconn        - Client connection/quit notices
#	Line 1182 | Line 1258 | general {
1258		* +d - debug        - See debugging notices
1259		* +e - external     - See remote server connection and split notices
1260		* +F - farconnect   - Remote client connection/quit notices
1261	<	* +f - full         - See auth{} block full notices
1261	>	* +f - full         - See auth {} block full notices
1262		* +G - softcallerid - Server Side Ignore for users not on your channels
1263		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1264		* +H - hidden       - Hides operator status to other users
1265	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
1190	<	*                     a channel
1265	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
1266		* +j - rej          - See rejected client notices
1267		* +k - skill        - See server generated KILL messages
1268		* +l - locops       - See LOCOPS messages
1269		* +n - nchange      - See client nick changes
1270	+	* +p - hidechans    - Hides channel list in WHOIS
1271	+	* +q - hideidle     - Hides idle and signon time in WHOIS
1272		* +R - nononreg     - Only receive private messages from registered clients
1273		* +s - servnotice   - See general server notices
1274		* +u - unauth       - See unauthorized client notices
1275		* +w - wallop       - See server generated WALLOPS
1276		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1200	–	* +z - operwall     - See oper generated WALLOPS
1277		*/
1278
1279	<	/* oper_only_umodes: usermodes only opers may set */
1280	<	oper_only_umodes = bots, cconn, debug, full, hidden, skill,
1281	<	nchange, rej, spy, external, operwall,
1206	<	locops, unauth, farconnect;
1207	<
1208	<	/* oper_umodes: default usermodes opers get when they /oper */
1209	<	oper_umodes = bots, locops, servnotice, operwall, wallop;
1279	>	/* oper_only_umodes: user modes only operators may set. */
1280	>	oper_only_umodes = bots, cconn, debug, external, farconnect, full, hidden,
1281	>	locops, nchange, rej, skill, spy, unauth;
1282
1283	<	/*
1284	<	* use_egd: if your system does not have *random devices yet you
1213	<	* want to use OpenSSL and encrypted links, enable this. Beware -
1214	<	* EGD is *very* CPU intensive when gathering data for its pool.
1215	<	*/
1216	<	#       use_egd = yes;
1283	>	/* oper_umodes: default user modes operators get when they successfully OPER. */
1284	>	oper_umodes = bots, locops, servnotice, wallop;
1285
1286		/*
1287	<	* egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1288	<	* which automatically finds the path.
1287	>	* throttle_count: the maximum number of connections from the same
1288	>	* IP address allowed in throttle_time duration.
1289		*/
1290	<	#       egdpool_path = "/var/run/egd-pool";
1290	>	throttle_count = 1;
1291
1292		/*
1293		* throttle_time: the minimum amount of time required between
1294	<	* connections from the same IP address. exempt {} blocks are excluded
1295	<	* from this throttling.
1294	>	* connections from the same IP address. exempt {} blocks are
1295	>	* excluded from this throttling.
1296		* Offers protection against flooders who reconnect quickly.
1297		* Set to 0 to disable.
1298		*/
1299	<	throttle_time = 10;
1299	>	throttle_time = 2 seconds;
1300		};
1301
1302		modules {
#	Line 1236 | Line 1304 | modules {
1304		* path: other paths to search for modules specified below
1305		* and in "/module load".
1306		*/
1307	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1308	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1307	>	path = "lib/ircd-hybrid/modules";
1308	>	#       path = "lib/ircd-hybrid/modules/extra";
1309	>	path = "lib/ircd-hybrid/modules/autoload";
1310
1311		/* module: the name of a module to load on startup/rehash. */
1312		#       module = "some_module.la";
#	Line 1252 | Line 1321 | log {
1321
1322		file {
1323		type = oper;
1324	<	name = "/usr/local/ircd/var/log/oper.log";
1324	>	name = "var/log/oper.log";
1325		size = unlimited;
1326		};
1327
1328		file {
1329		type = user;
1330	<	name = "/usr/local/ircd/var/log/user.log";
1330	>	name = "var/log/user.log";
1331		size = 50 megabytes;
1332		};
1333
1334		file {
1335		type = kill;
1336	<	name = "/usr/local/ircd/var/log/kill.log";
1336	>	name = "var/log/kill.log";
1337		size = 50 megabytes;
1338		};
1339
1340		file {
1341		type = kline;
1342	<	name = "/usr/local/ircd/var/log/kline.log";
1342	>	name = "var/log/kline.log";
1343		size = 50 megabytes;
1344		};
1345
1346		file {
1347		type = dline;
1348	<	name = "/usr/local/ircd/var/log/dline.log";
1348	>	name = "var/log/dline.log";
1349	>	size = 50 megabytes;
1350	>	};
1351	>
1352	>	file {
1353	>	type = xline;
1354	>	name = "var/log/xline.log";
1355		size = 50 megabytes;
1356		};
1357
1358		file {
1359	<	type = gline;
1360	<	name = "/usr/local/ircd/var/log/gline.log";
1359	>	type = resv;
1360	>	name = "var/log/resv.log";
1361		size = 50 megabytes;
1362		};
1363
1364		file {
1365		type = debug;
1366	<	name = "/usr/local/ircd/var/log/debug.log";
1366	>	name = "var/log/debug.log";
1367		size = 50 megabytes;
1368		};
1369		};

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)