ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/doc/reference.conf

Comparing ircd-hybrid/trunk/doc/reference.conf (file contents):
Revision 2322 by michael, Sun Jun 23 12:01:30 2013 UTC vs.
Revision 4545 by michael, Fri Aug 22 08:46:13 2014 UTC

#	Line 1 | Line 1
1	<	/* ircd-hybrid reference configuration file
2	<	* Copyright (C) 2000-2013 Hybrid Development Team
1	>	/*
2	>	* This is an example configuration file for ircd-hybrid
3		*
4	<	* Written by ejb, wcampbel, db, leeh and others
4	>	* Copyright (c) 2000-2014 ircd-hybrid development team
5		*
6		* $Id$
7		*/
#	Line 10 | Line 10
10		* ########################################################################
11		* IMPORTANT NOTE:
12		*
13	<	* auth {} blocks MUST be specified in order of precedence.  The first one
14	<	* that matches a user will be used.  So place spoofs first, then specials,
13	>	* auth {} blocks MUST be specified in order of precedence. The first one
14	>	* that matches a user will be used. So place spoofs first, then specials,
15		* then general access.
16		* ########################################################################
17		*
#	Line 23 | Line 23
23		*
24		* Times/durations are written as:
25		*        12 hours 30 minutes 1 second
26	<	*
26	>	*
27		* Valid units of time:
28		*        year, month, week, day, hour, minute, second
29		*
#	Line 39 | Line 39
39		*/
40		serverinfo {
41		/*
42	<	* name: the name of this server.  This cannot be changed at runtime.
42	>	* name: the name of this server. This cannot be changed at runtime.
43		*/
44		name = "hades.arpa";
45
46		/*
47	<	* sid: a server's unique ID.  This is three characters long and must
48	<	* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
47	>	* sid: a server's unique ID. This is three characters long and must
48	>	* be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	+	*
51		* NOTE: The letters must be capitalized. This cannot be changed at runtime.
52		*/
53		sid = "0HY";
#	Line 99 | Line 100 | serverinfo {
100
101		/*
102		* rsa_private_key_file: the path to the file containing the
103	<	* RSA key for cryptlink.
103	>	* RSA key.
104		*
105	<	* Example commands to store a 2048 bit RSA keypair in
105	<	* rsa.key, and the public key in rsa.pub:
105	>	* Example commands to store a 2048 bit RSA key in rsa.key:
106		*
107		*      openssl genrsa -out rsa.key 2048
108	<	*      openssl rsa -in rsa.key -pubout -out rsa.pub
109	<	*      chown <ircd-user>.<ircd.group> rsa.key rsa.pub
108	>	*      chown <ircd-user>.<ircd.group> rsa.key
109		*      chmod 0600 rsa.key
111	–	*      chmod 0644 rsa.pub
110		*/
111	<	#       rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
111	>	#       rsa_private_key_file = "etc/rsa.key";
112
113		/*
114		* ssl_certificate_file: the path to the file containing our
#	Line 132 | Line 130 | serverinfo {
130		*      Common Name: irc.someirc.net
131		*      E-mail: you@domain.com
132		*/
133	<	#       ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
133	>	#       ssl_certificate_file = "etc/cert.pem";
134
135		/*
136	<	* ssl_dh_param_file:
137	<	*
138	<	* Path to the PEM encoded Diffie-Hellman parameter file.
141	<	* DH parameters are required when using ciphers with EDH
142	<	* (ephemeral Diffie-Hellman) key exchange.
136	>	* ssl_dh_param_file: path to the PEM encoded Diffie-Hellman
137	>	* parameter file. DH parameters are required when using
138	>	* ciphers with EDH (ephemeral Diffie-Hellman) key exchange.
139		*
140		* A DH parameter file can be created by running:
141		*
142	<	*      openssl dhparam -out dhparam.pem 1024
142	>	*      openssl dhparam -out dhparam.pem 2048
143		*
144		* Prime size must be at least 1024 bits. Further information
145		* regarding specific OpenSSL dhparam command-line options
146		* can be found in the OpenSSL manual.
147		*/
148	<	#       ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
148	>	#       ssl_dh_param_file = "etc/dhparam.pem";
149
150		/*
151	<	* ssl_cipher_list:
151	>	* ssl_dh_elliptic_curve: defines the curve to use for the
152	>	* Elliptic Curve Diffie-Hellman (ECDH) algorithm.
153	>	* Default is ANSI X9.62 prime256v1/secp256r1 if nothing else is specified.
154	>	*
155	>	* A list of supported curves by OpenSSL can be obtained by running:
156		*
157	<	* List of ciphers to support on _this_ server. Can be used to
158	<	* enforce specific ciphers for incoming SSL/TLS connections.
159	<	* If a client (which also includes incoming server connections) is not
160	<	* capable of using any of the ciphers listed here, the connection will
157	>	*      openssl ecparam -list_curves
158	>	*/
159	>	#       ssl_dh_elliptic_curve = "secp521r1";
160	>
161	>	/*
162	>	* ssl_cipher_list: list of ciphers to support on _this_ server.
163	>	* Can be used to enforce specific ciphers for incoming SSL/TLS
164	>	* connections. If a client (which also includes incoming server connections)
165	>	* is not capable of using any of the ciphers listed here, the connection will
166		* simply be rejected.
167		*
168		* A list of supported ciphers by OpenSSL can be obtained by running:
#	Line 167 | Line 172 | serverinfo {
172		* Multiple ciphers are separated by colons. The order of preference is
173		* from left to right.
174		*/
175	<	#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
175	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
176
177		/*
178	<	* ssl_server_method:
179	<	* ssl_client_method:
178	>	* ssl_message_digest_algorithm: defines what cryptographic hash function
179	>	* to use for generating fingerprint hashes of X.509 certificates.
180	>	* Default is SHA-256 if nothing else is specified.
181	>	*
182	>	* A list of supported message digest algorithms by OpenSSL can be obtained by running:
183		*
184	<	* SSL/TLS methods we provide for incoming (server method) and
177	<	* outgoing (client method) SSL/TLS connections.
178	<	* This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
184	>	*      openssl list-message-digest-algorithms
185		*/
186	<	#       ssl_server_method = tlsv1, sslv3;
181	<	#       ssl_client_method = tlsv1;
186	>	#       ssl_message_digest_algorithm = "sha256";
187		};
188
189		/*
#	Line 205 | Line 210 | class {
210
211		/*
212		* number_per_ip: how many local users are allowed to connect
213	<	* from a single IP address  (optional)
213	>	* from a single IP address (optional)
214		*/
215		number_per_ip = 2;
216
217		/*
218		* max_local: how many local users are allowed to connect
219	<	* from a single ident@host  (optional)
219	>	* from a single ident@host (optional)
220		*/
221		max_local = 2;
222
223		/*
224	<	* max_global: network-wide limit of users per ident@host  (optional)
224	>	* max_global: network-wide limit of users per ident@host (optional)
225		*/
226		max_global = 10;
227
#	Line 226 | Line 231 | class {
231		max_number = 100;
232
233		/*
234	<	* the following lines are optional and allow you to define
234	>	* The following lines are optional and allow you to define
235		* how many users can connect from one /NN subnet.
236		*/
237		cidr_bitlen_ipv4 = 24;
#	Line 241 | Line 246 | class {
246
247		/*
248		* recvq: the amount of data allowed in a client's receive queue before
249	<	* they are dropped for flooding. Defaults to 2560 if the chosen
250	<	* value isn't within the range of 512 to 8000.
249	>	* they are dropped for flooding. Defaults to 2560 if the chosen value
250	>	* isn't within the range of 512 to 8000.
251		*/
252		recvq = 2560 bytes;
253		};
#	Line 255 | Line 260 | class {
260		sendq = 100 kbytes;
261
262		/*
263	+	* max_channels: maximum number of channels users in this class can join.
264	+	*/
265	+	max_channels = 60;
266	+
267	+	/*
268		* min_idle: minimum idle time that is shown in /whois.
269		*/
270		min_idle = 3 hours;
#	Line 298 | Line 308 | class {
308		motd {
309		/*
310		* mask: multiple mask entries are permitted. Mask can either be
311	<	* a class name or a hostname.
311	>	* a class name or a hostname. CIDR is supported.
312		*/
313		mask = "*.at";
314		mask = "*.de";
#	Line 307 | Line 317 | motd {
317		/*
318		* file: path to the actual motd file.
319		*/
320	<	file = "/usr/local/ircd/etc/german.motd";
320	>	file = "etc/german.motd";
321		};
322
323		/*
#	Line 315 | Line 325 | motd {
325		*/
326		listen {
327		/*
328	<	* port: the port to listen on. If no host is specified
329	<	* earlier in the listen {} block, it will listen on all available IPs.
328	>	* port: the port to listen on. If no host is specified earlier
329	>	* in the listen {} block, it will listen on all available IPs.
330		*
331	<	* Ports are separated by commsa; a range may be specified using ".."
331	>	* Ports are separated by commas; a range may be specified using ".."
332		*/
333	<
334	<	/* port: listen on all available IP addresses, ports 6665 to 6669 */
333	>
334	>	/* port: listen on all available IP addresses, ports 6665 to 6669. */
335		port = 6665 .. 6669;
336
337		/*
#	Line 357 | Line 367 | listen {
367		auth {
368		/*
369		* user: the user@host allowed to connect. Multiple user
370	<	* lines are permitted within each auth block.
370	>	* lines are permitted within each auth {} block.
371		*/
372		user = "*@172.16.0.0/12";
373		user = "*test@123D:B567:*";
374
375	<	/* password: an optional password that is required to use this block */
375	>	/* password: an optional password that is required to use this block. */
376		password = "letmein";
377
378		/*
#	Line 377 | Line 387 | auth {
387		*/
388		spoof = "I.still.hate.packets";
389
390	<	/* class: the class the user is placed in */
390	>	/* class: the class the user is placed in. */
391		class = "opers";
392
393		/*
394	<	* need_password - don't allow users who haven't supplied the correct
395	<	*                 password to connect using another auth{} block
396	<	*                 ('&' prefix on /stats I if disabled)
387	<	* need_ident    - require the user to have identd to connect ('+' prefix on /stats I)
394	>	* need_password - don't allow users who haven't supplied the correct  | ('&' prefix on /stats I if disabled)
395	>	*                 password to connect using another auth {} block
396	>	* need_ident    - require the user to have identd to connect          | ('+' prefix on /stats I)
397		* spoof_notice  - enable spoofing notification to admins
398	<	* exceed_limit  - allow a user to exceed class limits ('>' prefix on /stats I)
399	<	* kline_exempt  - exempt this user from k/glines ('^' prefix on /stats I)
400	<	* gline_exempt  - exempt this user from glines ('_' prefix on /stats I)
401	<	* resv_exempt   - exempt this user from resvs ('$' prefix on /stats I)
402	<	* no_tilde      - remove ~ from a user with no ident ('-' prefix on /stats I)
403	<	* can_flood     - allow this user to exceed flood limits ('|' prefix on /stats I)
404	<	* webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
405	<	*                 ('<' prefix on /stats I)
398	>	* exceed_limit  - allow a user to exceed class limits                 | ('>' prefix on /stats I)
399	>	* kline_exempt  - exempt this user from k/glines                      | ('^' prefix on /stats I)
400	>	* gline_exempt  - exempt this user from glines                        | ('_' prefix on /stats I)
401	>	* resv_exempt   - exempt this user from resvs                         | ('$' prefix on /stats I)
402	>	* no_tilde      - remove ~ from a user with no ident                  | ('-' prefix on /stats I)
403	>	* can_flood     - allow this user to exceed flood limits              | ('|' prefix on /stats I)
404	>	* webirc        - enables WEBIRC authentication for web-based         | ('<' prefix on /stats I)
405	>	*                 clients such as Mibbit
406		*/
407		flags = need_password, spoof_notice, exceed_limit, kline_exempt,
408		gline_exempt, resv_exempt, no_tilde, can_flood;
#	Line 401 | Line 410 | auth {
410
411		auth {
412		/*
413	<	* redirect: the server and port to redirect a user to. A user does not
414	<	* have to obey the redirection; the ircd just suggests an alternative
415	<	* server for them.
413	>	* redirserv, redirport: the server and port to redirect a user to.
414	>	* A user does not have to obey the redirection; the ircd just
415	>	* suggests an alternative server for them.
416		*/
417	<	redirserv = "this.is.not.a.real.server";
417	>	redirserv = "server.tld";
418		redirport = 6667;
410	–
411	–	user = "*.server";
419
420	<	/* class: a class is required even though it is not used */
420	>	user = "*@*.tld";
421	>
422	>	/* class: a class is required even though it is not used. */
423		class = "users";
424		};
425
#	Line 424 | Line 433 | auth {
433		* operator {}:  defines ircd operators
434		*/
435		operator {
436	<	/* name: the name of the oper */
436	>	/* name: the name of the operator */
437		name = "sheep";
438
439		/*
440	<	* user: the user@host required for this operator. Multiple
441	<	* user="" lines are supported.
440	>	* user: the user@host required for this operator. Multiple user
441	>	* lines are permitted within each operator {} block.
442		*/
443		user = "*sheep@192.168.0.0/16";
444		user = "*@127.0.0.0/8";
#	Line 446 | Line 455 | operator {
455
456		/*
457		* encrypted: controls whether the oper password above has been
458	<	* encrypted.
458	>	* encrypted. Default is 'yes' if nothing else is specified.
459		*/
460		encrypted = yes;
461
462		/*
463	<	* rsa_public_key_file: the public key for this oper when using Challenge.
464	<	* A password should not be defined when this is used; see
463	>	* rsa_public_key_file: the public key for this oper when using /challenge.
464	>	* A password should not be defined when this is used; see
465		* doc/challenge.txt for more information.
466		*/
467	<	#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
467	>	#       rsa_public_key_file = "etc/oper.pub";
468
469		/*
470		* ssl_certificate_fingerprint: enhances security by additionally checking
#	Line 471 | Line 480 | operator {
480
481		/*
482		* ssl_connection_required: client must be connected over SSL/TLS
483	<	* in order to be able to use this oper{} block.
483	>	* in order to be able to use this operator {} block.
484		* Default is 'no' if nothing else is specified.
485		*/
486		ssl_connection_required = no;
487
488	<	/* class: the class the oper joins when they successfully /oper */
488	>	/* class: the class the oper joins when they successfully /oper or /challenge. */
489		class = "opers";
490
491		/*
492	<	* umodes: the default usermodes opers get when they /oper. If defined,
493	<	* it will override oper_umodes settings in general {}.
492	>	* umodes: the default usermodes opers get when they /oper or /challenge.
493	>	* If defined, it will override oper_umodes settings in general {}.
494		* Available usermodes:
495		*
496		* +b - bots         - See bot and drone flooding notices
#	Line 490 | Line 499 | operator {
499		* +d - debug        - See debugging notices
500		* +e - external     - See remote server connection and split notices
501		* +F - farconnect   - Remote client connection/quit notices
502	<	* +f - full         - See auth{} block full notices
502	>	* +f - full         - See auth {} block full notices
503		* +G - softcallerid - Server Side Ignore for users not on your channels
504		* +g - callerid     - Server Side Ignore (for privmsgs etc)
505		* +H - hidden       - Hides operator status to other users
#	Line 499 | Line 508 | operator {
508		* +k - skill        - See server generated KILL messages
509		* +l - locops       - See LOCOPS messages
510		* +n - nchange      - See client nick changes
511	+	* +p - hidechans    - Hides channel list in WHOIS
512	+	* +q - hideidle     - Hides idle and signon time in WHOIS
513		* +R - nononreg     - Only receive private messages from registered clients
514		* +s - servnotice   - See general server notices
515		* +u - unauth       - See unauthorized client notices
516		* +w - wallop       - See server generated WALLOPS
517		* +y - spy          - See LINKS, STATS, TRACE notices etc.
507	–	* +z - operwall     - See oper generated WALLOPS
518		*/
519	<	umodes = locops, servnotice, operwall, wallop;
519	>	umodes = locops, servnotice, wallop;
520
521		/*
522		* privileges: controls the activities and commands an oper is
523	<	* allowed to do on the server. All options default to no.
524	<	* Available options:
523	>	* allowed to do on the server. All flags default to 'no'.
524	>	* Available flags:
525		*
526	<	* module         - allows MODULE
526	>	* admin          - gives administrator privileges    | ('A' flag)
527		* connect        - allows local CONNECT              | ('P' flag)
528		* connect:remote - allows remote CONNECT             | ('Q' flag)
529	<	* squit          - allows local SQUIT                | ('R' flag)
530	<	* squit:remote   - allows remote SQUIT               | ('S' flag)
529	>	* die            - allows DIE                        | ('D' flag)
530	>	* dline          - allows DLINE                      |
531	>	* gline          - allows GLINE                      | ('G' flag)
532	>	* globops        - allows GLOBOPS                    |
533		* kill           - allows to KILL local clients      | ('N' flag)
534		* kill:remote    - allows remote users to be /KILL'd | ('O' flag)
523	–	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
524	–	* dline          - allows DLINE                      |
525	–	* undline        - allows UNDLINE                    |
535		* kline          - allows KLINE                      | ('K' flag)
527	–	* unkline        - allows UNKLINE                    | ('U' flag)
528	–	* gline          - allows GLINE                      | ('G' flag)
529	–	* xline          - allows XLINE                      | ('X' flag)
536		* locops         - allows LOCOPS                     |
537	<	* globops        - allows GLOBOPS                    |
532	<	* wallops        - allows WALLOPS                    |
533	<	* operwall       - allows OPERWALL                   | ('L' flag)
537	>	* module         - allows MODULE                     |
538		* rehash         - allows oper to REHASH config      | ('H' flag)
539	<	* die            - allows DIE                        | ('D' flag)
539	>	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
540		* restart        - allows RESTART                    |
541		* set            - allows SET                        |
542	<	* admin          - gives administrator privileges    | ('A' flag)
542	>	* squit          - allows local SQUIT                | ('R' flag)
543	>	* squit:remote   - allows remote SQUIT               | ('S' flag)
544	>	* undline        - allows UNDLINE                    |
545	>	* unkline        - allows UNKLINE                    | ('U' flag)
546	>	* unxline        - allows UNXLINE                    |
547	>	* wallops        - allows WALLOPS                    |
548	>	* xline          - allows XLINE                      | ('X' flag)
549		*/
550	<	flags = kill, kill:remote, connect, connect:remote, kline, unkline,
551	<	xline, globops, restart, die, rehash, admin, operwall, module;
550	>	flags = admin, connect, connect:remote, die, globops, kill, kill:remote,
551	>	kline, module, rehash, restart, set, unkline, unxline, xline;
552		};
553
554		/*
555		* service {}: specifies a server which may act as a network service
556		*
557		* NOTE: it is very important that every server on the network
558	<	*       has the same service{} block.
558	>	*       has the same service {} block.
559		*/
560		service {
561		name = "service.someserver";
#	Line 556 | Line 566 | service {
566		* connect {}: define a server to connect to
567		*/
568		connect {
569	<	/* name: the name of the server */
569	>	/* name: the name of the server. */
570		name = "irc.uplink.com";
571
572		/*
#	Line 574 | Line 584 | connect {
584		vhost = "192.168.0.2";
585
586		/*
587	<	* passwords: the passwords to send (OLD C:) and accept (OLD N:).
587	>	* send_password, accept_password: the passwords to send and accept.
588		* The remote server will have these passwords swapped.
589		*/
590		send_password = "password";
#	Line 586 | Line 596 | connect {
596		*/
597		encrypted = no;
598
599	<	/* port: the port to connect to this server on */
599	>	/* port: the port to connect to this server on. */
600		port = 6666;
601
602		/*
#	Line 601 | Line 611 | connect {
611		*/
612		#       leaf_mask = "*.uk";
613
614	<	/* class: the class this server is in */
614	>	/* class: the class this server is in. */
615		class = "server";
616
617		/*
618	<	* ssl_cipher_list:
619	<	*
620	<	* List of ciphers that the server we are connecting to must support.
611	<	* If the server is not capable of using any of the ciphers listed below,
612	<	* the connection will simply be rejected.
618	>	* ssl_cipher_list: list of ciphers that the server we are connecting to
619	>	* must support. If the server is not capable of using any of the ciphers
620	>	* listed below, the connection will simply be rejected.
621		* Can be used to enforce stronger ciphers, even though this option
622		* is not necessarily required to establish a SSL/TLS connection.
623		*
624		* Multiple ciphers are separated by colons. The order of preference
625		* is from left to right.
626		*/
627	<	#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
627	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
628
629		/*
630		* ssl_certificate_fingerprint: enhances security by additionally checking
#	Line 661 | Line 669 | cluster {
669		*       will not be propagated to clustered servers.
670		*
671		*       Remote servers are not necessarily required to accept
672	<	*       clustered lines, they need a shared{} for *THIS* server
673	<	*       in order to accept them.
672	>	*       clustered lines, they need a shared {} block for *THIS*
673	>	*       server in order to accept them.
674		*/
675		name = "*.arpa";
676
#	Line 723 | Line 731 | shared {
731
732		/*
733		* kill {}:  users that are not allowed to connect
734	<	* Oper issued klines will be added to the specified kline config
734	>	* Oper issued klines will be added to the specified kline database
735		*/
736		kill {
737		user = "bad@*.hacked.edu";
#	Line 733 | Line 741 | kill {
741		/*
742		* deny {}:  IP addresses that are not allowed to connect
743		* (before DNS/ident lookup)
744	<	* Oper issued dlines will be added to the specified dline config
744	>	* Oper issued dlines will be added to the specified dline database
745		*/
746		deny {
747		ip = "10.0.1.0/24";
#	Line 751 | Line 759 | exempt {
759		* resv {}:  nicks and channels users may not use/join
760		*/
761		resv { mask = "clone*"; reason = "Clone bots"; };
762	+	resv { mask = "Global"; reason = "Reserved for services"; };
763		resv { mask = "ChanServ"; reason = "Reserved for services"; };
764		resv { mask = "NickServ"; reason = "Reserved for services"; };
765		resv { mask = "OperServ"; reason = "Reserved for services"; };
#	Line 767 | Line 776 | resv {
776		* as channel name masks.
777		*/
778		mask = "#helsinki";
779	<	reason = "Channel is reserved for finnish inhabitants";
779	>	reason = "Channel is reserved for Finnish inhabitants";
780
781		/*
782		* exempt: can be either a ISO 3166 alpha-2 two letter country
#	Line 778 | Line 787 | resv {
787		};
788
789		/*
790	<	* gecos {}:  Used for banning users based on their "realname".
790	>	* gecos {}:  used for banning users based on their "realname".
791		*/
792		gecos {
793		name = "*sex*";
#	Line 791 | Line 800 | gecos {
800		};
801
802		/*
803	<	* channel {}:  The channel block contains options pertaining to channels
803	>	* pseudo {}: adds pseudo/custom commands also known as service aliases
804	>	*/
805	>	pseudo {
806	>	/* command: the actual command/alias */
807	>	command = "IDENTIFY";
808	>
809	>	/* prepend: optional text that can be prepended before the user's message */
810	>	prepend = "IDENTIFY ";
811	>
812	>	/* name: the service name, used for error messages */
813	>	name = "NickServ";
814	>
815	>	/* target: the actual target where this message should be sent to */
816	>	target = "NickServ@service.someserver";
817	>	};
818	>
819	>	pseudo {
820	>	command = "CHANSERV";
821	>	name = "ChanServ";
822	>	target = "ChanServ@service.someserver";
823	>	};
824	>
825	>	pseudo {
826	>	command = "CS";
827	>	name = "ChanServ";
828	>	target = "ChanServ@service.someserver";
829	>	};
830	>
831	>	pseudo {
832	>	command = "NICKSERV";
833	>	name = "NickServ";
834	>	target = "NickServ@service.someserver";
835	>	};
836	>
837	>	pseudo {
838	>	command = "NS";
839	>	name = "NickServ";
840	>	target = "NickServ@service.someserver";
841	>	};
842	>
843	>	pseudo {
844	>	command = "MEMOSERV";
845	>	name = "MemoServ";
846	>	target = "MemoServ@service.someserver";
847	>	};
848	>
849	>	pseudo {
850	>	command = "MS";
851	>	name = "MemoServ";
852	>	target = "MemoServ@service.someserver";
853	>	};
854	>
855	>	pseudo {
856	>	command = "OPERSERV";
857	>	name = "OperServ";
858	>	target = "OperServ@service.someserver";
859	>	};
860	>
861	>	pseudo {
862	>	command = "OS";
863	>	name = "OperServ";
864	>	target = "OperServ@service.someserver";
865	>	};
866	>
867	>	pseudo {
868	>	command = "HOSTSERV";
869	>	name = "HostServ";
870	>	target = "HostServ@service.someserver";
871	>	};
872	>
873	>	pseudo {
874	>	command = "HS";
875	>	name = "HostServ";
876	>	target = "HostServ@service.someserver";
877	>	};
878	>
879	>	pseudo {
880	>	command = "BOTSERV";
881	>	name = "BotServ";
882	>	target = "BotServ@service.someserver";
883	>	};
884	>
885	>	pseudo {
886	>	command = "BS";
887	>	name = "BotServ";
888	>	target = "BotServ@service.someserver";
889	>	};
890	>
891	>	/*
892	>	* channel {}:  the channel block contains options pertaining to channels
893		*/
894		channel {
895		/*
#	Line 810 | Line 908 | channel {
908		disable_fake_channels = yes;
909
910		/*
911	<	* knock_delay: The amount of time a user must wait between issuing
912	<	* the knock command.
911	>	* invite_client_count, invite_client_time: how many INVITE commands
912	>	* are permitted per client per invite_client_time.
913		*/
914	<	knock_delay = 5 minutes;
914	>	invite_client_count = 10;
915	>	invite_client_time = 5 minutes;
916
917		/*
918	<	* knock_delay_channel: How often a knock to any specific channel
919	<	* is permitted, regardless of the user sending the knock.
918	>	* knock_client_count, knock_client_time: how many KNOCK commands
919	>	* are permitted per client per knock_client_time.
920		*/
921	<	knock_delay_channel = 1 minute;
921	>	knock_client_count = 1;
922	>	knock_client_time = 5 minutes;
923
924		/*
925	<	* max_chans_per_user: The maximum number of channels a user can
926	<	* join/be on.
925	>	* knock_delay_channel: how often a KNOCK to any specific channel
926	>	* is permitted, regardless of the user sending the KNOCK.
927		*/
928	<	max_chans_per_user = 25;
928	>	knock_delay_channel = 1 minute;
929
930		/*
931	<	* max_chans_per_oper: The maximum number of channels an oper can
932	<	* join/be on.
931	>	* max_channels: the maximum number of channels a user can join/be on.
932	>	* This is a default value which can be overriden with class {} blocks.
933		*/
934	<	max_chans_per_oper = 50;
934	>	max_channels = 25;
935
936		/* max_bans: maximum number of +b/e/I modes in a channel */
937		max_bans = 100;
#	Line 850 | Line 950 | channel {
950		*
951		* Either split users or split servers can activate splitmode, but
952		* both conditions must be met for the ircd to deactivate splitmode.
953	<	*
953	>	*
954		* You may force splitmode to be permanent by /quote set splitmode on
955		*/
956
#	Line 874 | Line 974 | channel {
974		};
975
976		/*
977	<	* serverhide {}:  The serverhide block contains the options regarding
978	<	* to server hiding
977	>	* serverhide {}:  the serverhide block contains the options regarding
978	>	* to server hiding. For more information regarding server hiding,
979	>	* please see doc/serverhide.txt
980		*/
981		serverhide {
982		/*
#	Line 910 | Line 1011 | serverhide {
1011
1012		/*
1013		* hide_services: define this if you want to hide the location of
1014	<	* services servers that are specified in the service{} block.
1014	>	* services servers that are specified in the service {} block.
1015		*/
1016		hide_services = no;
1017
1018		/*
1019	<	* Use this as the servername users see if hide_servers = yes.
1019	>	* hidden_name: use this as the servername users see if hide_servers = yes.
1020		*/
1021		hidden_name = "*.hidden.com";
1022
1023		/*
1024	<	* hide_server_ips: If this is disabled, opers will be unable to see
1024	>	* hide_server_ips: if this is disabled, opers will be unable to see
1025		* servers' IP addresses and will be shown a masked IP address; admins
1026		* will be shown the real IP address.
1027		*
#	Line 935 | Line 1036 | serverhide {
1036		};
1037
1038		/*
1039	<	* general {}:  The general block contains many of the options that were once
1039	>	* general {}:  the general block contains many of the options that were once
1040		* compiled in options in config.h
1041		*/
1042		general {
#	Line 945 | Line 1046 | general {
1046		*/
1047		cycle_on_host_change = yes;
1048
948	–	/* services_name: servername of nick/channel services */
949	–	services_name = "service.someserver";
950	–
1049		/* max_watch: maximum WATCH entries a client can have. */
1050	<	max_watch = 60;
1050	>	max_watch = 30;
1051	>
1052	>	/* max_accept: maximum allowed /accept's for +g usermode. */
1053	>	max_accept = 30;
1054
1055		/* gline_enable: enable glines (network-wide temporary klines). */
1056		gline_enable = yes;
1057
1058		/*
1059	<	* gline_duration: the amount of time a gline will remain on your
1059	>	* gline_duration: the amount of time a G-line will remain on your
1060		* server before expiring.
1061		*/
1062		gline_duration = 1 day;
#	Line 968 | Line 1069 | general {
1069
1070		/*
1071		* gline_min_cidr: the minimum required length of a CIDR bitmask
1072	<	* for IPv4 based glines.
1072	>	* for IPv4 based G-lines.
1073		*/
1074		gline_min_cidr = 16;
1075
1076		/*
1077		* gline_min_cidr6: the minimum required length of a CIDR bitmask
1078	<	* for IPv6 based glines.
1078	>	* for IPv6 based G-lines.
1079		*/
1080		gline_min_cidr6 = 48;
1081
1082		/*
1083	<	* Whether to automatically set mode +i on connecting users.
1083	>	* invisible_on_connect: whether to automatically set mode +i on
1084	>	* connecting users.
1085		*/
1086		invisible_on_connect = yes;
1087
#	Line 989 | Line 1091 | general {
1091		* automatically to the new nick. kill_chase_time_limit is the maximum
1092		* time following a nickname change that this chasing will apply.
1093		*/
1094	<	kill_chase_time_limit = 90 seconds;
1094	>	kill_chase_time_limit = 30 seconds;
1095
1096		/*
1097		* hide_spoof_ips: if disabled, opers will be allowed to see the real
#	Line 999 | Line 1101 | general {
1101		hide_spoof_ips = yes;
1102
1103		/*
1104	<	* Ignore bogus timestamps from other servers. Yes, this will desync the
1105	<	* network, but it will allow chanops to resync with a valid non TS 0
1104	>	* ignore_bogus_ts: ignore bogus timestamps from other servers.
1105	>	* Yes, this will desync the network, but it will allow chanops
1106	>	* to resync with a valid non TS 0.
1107		*
1108		* This should be enabled network wide, or not at all.
1109		*/
#	Line 1020 | Line 1123 | general {
1123
1124		/*
1125		* default_floodcount: the default value of floodcount that is configurable
1126	<	* via /quote set floodcount. This is the number of lines a user
1127	<	* may send to any other user/channel in one second.
1126	>	* via /quote set floodcount. This is the number of lines a user may send
1127	>	* to any other user/channel in one second.
1128		*/
1129		default_floodcount = 10;
1130
#	Line 1041 | Line 1144 | general {
1144		* min_nonwildcard: the minimum number of non-wildcard characters in
1145		* k/d/g lines placed via the server. K-lines hand-placed are exempt from
1146		* this limit.
1147	<	* Wildcard chars: '.', ':', '*', '?', '@', '!'
1147	>	* Wildcard characters: '.', ':', '*', '?', '@', '!'
1148		*/
1149		min_nonwildcard = 4;
1150
1151		/*
1152		* min_nonwildcard_simple: the minimum number of non-wildcard characters
1153	<	* in gecos bans. Wildcard chars: '*', '?'
1153	>	* in gecos bans. Wildcard characters: '*', '?'
1154		*/
1155		min_nonwildcard_simple = 3;
1156
1054	–	/* max_accept: maximum allowed /accept's for +g usermode. */
1055	–	max_accept = 20;
1056	–
1157		/* anti_nick_flood: enable the nickflood control code. */
1158		anti_nick_flood = yes;
1159
1160	<	/* nick flood: the number of nick changes allowed in the specified period */
1160	>	/* nick flood: the number of nick changes allowed in the specified period. */
1161		max_nick_time = 20 seconds;
1162		max_nick_changes = 5;
1163
1164		/*
1165	+	* away_count, away_time: how many AWAY command are permitted per
1166	+	* client per away_time.
1167	+	*/
1168	+	away_count = 2;
1169	+	away_time = 10 seconds;
1170	+
1171	+	/*
1172		* anti_spam_exit_message_time: the minimum time a user must be connected
1173		* before custom quit messages are allowed.
1174		*/
1175		anti_spam_exit_message_time = 5 minutes;
1176
1177		/*
1178	<	* ts delta: the time delta allowed between server clocks before
1179	<	* a warning is given, or before the link is dropped. All servers
1180	<	* should run ntpdate/rdate to keep clocks in sync
1178	>	* ts_warn_delta, ts_max_delta: the time delta allowed between server
1179	>	* clocks before a warning is given, or before the link is dropped.
1180	>	* All servers should run ntpdate/rdate to keep clocks in sync.
1181		*/
1182	<	ts_warn_delta = 30 seconds;
1183	<	ts_max_delta = 5 minutes;
1182	>	ts_warn_delta = 3 seconds;
1183	>	ts_max_delta = 15 seconds;
1184
1185		/*
1186	<	* warn_no_nline: warn opers about servers that try to connect but
1187	<	* for which we don't have a connect {} block. Twits with misconfigured
1188	<	* servers can become really annoying with this enabled.
1186	>	* warn_no_connect_block: warn opers about servers that try to connect
1187	>	* but for which we don't have a connect {} block. Twits with
1188	>	* misconfigured servers can become really annoying with this enabled.
1189		*/
1190	<	warn_no_nline = yes;
1190	>	warn_no_connect_block = yes;
1191
1192		/*
1193		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1194		* operators and administrators. Doing so is a good idea in case
1195	<	* there are any exempted (exempt{}) server IPs you don't want to
1195	>	* there are any exempted (exempt {}) server IPs you don't want to
1196		* see leaked.
1197		*/
1198		stats_e_disabled = no;
1199
1200	<	/* stats_o_oper only: make stats o (opers) oper only */
1200	>	/* stats_o_oper_only: make stats o (opers) oper only. */
1201		stats_o_oper_only = yes;
1202
1203	<	/* stats_P_oper_only: make stats P (ports) oper only */
1203	>	/* stats_P_oper_only: make stats P (ports) oper only. */
1204		stats_P_oper_only = yes;
1205
1206	<	/* stats_u_oper_only: make stats u (uptime) oper only */
1206	>	/* stats_u_oper_only: make stats u (uptime) oper only. */
1207		stats_u_oper_only = no;
1208
1209		/*
1210	<	* stats i oper only: make stats i (auth {}) oper only. Set to:
1211	<	*     yes    - show users no auth blocks, made oper only.
1212	<	*     masked - show users the first matching auth block
1213	<	*     no     - show users all auth blocks.
1210	>	* stats_i_oper_only: make stats i (auth {}) oper only. Set to:
1211	>	*     yes    - show users no auth {} blocks, made oper only
1212	>	*     masked - show users the first matching auth {} block
1213	>	*     no     - show users all auth {} blocks
1214		*/
1215		stats_i_oper_only = yes;
1216
1217		/*
1218		* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1219	<	*     yes    - show users no auth blocks, made oper only
1220	<	*     masked - show users the first matching auth block
1221	<	*     no     - show users all auth blocks.
1219	>	*     yes    - show users no auth {} blocks, made oper only
1220	>	*     masked - show users the first matching auth {} block
1221	>	*     no     - show users all auth {} blocks
1222		*/
1223		stats_k_oper_only = yes;
1224
#	Line 1130 | Line 1237 | general {
1237		/*
1238		* pace_wait_simple: minimum time required between use of less
1239		* intensive commands
1240	<	* (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1240	>	* (ADMIN, HELP, LUSERS, VERSION, remote WHOIS)
1241		*/
1242		pace_wait_simple = 1 second;
1243
1244		/*
1245		* pace_wait: minimum time required between use of more intensive commands
1246	<	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1246	>	* (INFO, LINKS, MAP, MOTD, STATS, WHO, WHOWAS)
1247		*/
1248		pace_wait = 10 seconds;
1249
#	Line 1147 | Line 1254 | general {
1254		short_motd = no;
1255
1256		/*
1257	<	* ping_cookie: require clients to respond exactly to a ping command,
1257	>	* ping_cookie: require clients to respond exactly to a PING command,
1258		* can help block certain types of drones and FTP PASV mode spoofing.
1259		*/
1260		ping_cookie = no;
#	Line 1157 | Line 1264 | general {
1264
1265		/*
1266		* true_no_oper_flood: completely eliminate flood limits for opers
1267	<	* and for clients with can_flood = yes in their auth {} blocks.
1267	>	* and for clients with 'can_flood' in their auth {} blocks.
1268		*/
1269		true_no_oper_flood = yes;
1270
1271		/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1272		oper_pass_resv = yes;
1273
1274	<	/* REMOVE ME.  The following line checks that you have been reading. */
1274	>	/* REMOVE ME. The following line checks that you have been reading. */
1275		havent_read_conf = 1;
1276
1277		/*
#	Line 1182 | Line 1289 | general {
1289		* +d - debug        - See debugging notices
1290		* +e - external     - See remote server connection and split notices
1291		* +F - farconnect   - Remote client connection/quit notices
1292	<	* +f - full         - See auth{} block full notices
1292	>	* +f - full         - See auth {} block full notices
1293		* +G - softcallerid - Server Side Ignore for users not on your channels
1294		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1295		* +H - hidden       - Hides operator status to other users
1296	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
1190	<	*                     a channel
1296	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
1297		* +j - rej          - See rejected client notices
1298		* +k - skill        - See server generated KILL messages
1299		* +l - locops       - See LOCOPS messages
1300		* +n - nchange      - See client nick changes
1301	+	* +p - hidechans    - Hides channel list in WHOIS
1302	+	* +q - hideidle     - Hides idle and signon time in WHOIS
1303		* +R - nononreg     - Only receive private messages from registered clients
1304		* +s - servnotice   - See general server notices
1305		* +u - unauth       - See unauthorized client notices
1306		* +w - wallop       - See server generated WALLOPS
1307		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1200	–	* +z - operwall     - See oper generated WALLOPS
1308		*/
1309
1310	<	/* oper_only_umodes: usermodes only opers may set */
1311	<	oper_only_umodes = bots, cconn, debug, full, hidden, skill,
1312	<	nchange, rej, spy, external, operwall,
1206	<	locops, unauth, farconnect;
1310	>	/* oper_only_umodes: usermodes only operators may set. */
1311	>	oper_only_umodes = bots, cconn, debug, external, farconnect, full, hidden, locops,
1312	>	nchange, rej, skill, spy, unauth;
1313
1314	<	/* oper_umodes: default usermodes opers get when they /oper */
1315	<	oper_umodes = bots, locops, servnotice, operwall, wallop;
1314	>	/* oper_umodes: default usermodes operators get when they /oper or /challenge. */
1315	>	oper_umodes = bots, locops, servnotice, wallop;
1316
1317		/*
1318	<	* use_egd: if your system does not have *random devices yet you
1319	<	* want to use OpenSSL and encrypted links, enable this. Beware -
1214	<	* EGD is *very* CPU intensive when gathering data for its pool.
1318	>	* throttle_count: the maximum number of connections from the same
1319	>	* IP address allowed in throttle_time duration.
1320		*/
1321	<	#       use_egd = yes;
1217	<
1218	<	/*
1219	<	* egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1220	<	* which automatically finds the path.
1221	<	*/
1222	<	#       egdpool_path = "/var/run/egd-pool";
1321	>	throttle_count = 1;
1322
1323		/*
1324		* throttle_time: the minimum amount of time required between
1325	<	* connections from the same IP address. exempt {} blocks are excluded
1326	<	* from this throttling.
1325	>	* connections from the same IP address. exempt {} blocks are
1326	>	* excluded from this throttling.
1327		* Offers protection against flooders who reconnect quickly.
1328		* Set to 0 to disable.
1329		*/
1330	<	throttle_time = 10;
1330	>	throttle_time = 2 seconds;
1331		};
1332
1333		modules {
#	Line 1236 | Line 1335 | modules {
1335		* path: other paths to search for modules specified below
1336		* and in "/module load".
1337		*/
1338	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1339	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1338	>	path = "lib/ircd-hybrid/modules";
1339	>	path = "lib/ircd-hybrid/modules/autoload";
1340
1341		/* module: the name of a module to load on startup/rehash. */
1342		#       module = "some_module.la";
#	Line 1252 | Line 1351 | log {
1351
1352		file {
1353		type = oper;
1354	<	name = "/usr/local/ircd/var/log/oper.log";
1354	>	name = "var/log/oper.log";
1355		size = unlimited;
1356		};
1357
1358		file {
1359		type = user;
1360	<	name = "/usr/local/ircd/var/log/user.log";
1360	>	name = "var/log/user.log";
1361		size = 50 megabytes;
1362		};
1363
1364		file {
1365		type = kill;
1366	<	name = "/usr/local/ircd/var/log/kill.log";
1366	>	name = "var/log/kill.log";
1367		size = 50 megabytes;
1368		};
1369
1370		file {
1371		type = kline;
1372	<	name = "/usr/local/ircd/var/log/kline.log";
1372	>	name = "var/log/kline.log";
1373		size = 50 megabytes;
1374		};
1375
1376		file {
1377		type = dline;
1378	<	name = "/usr/local/ircd/var/log/dline.log";
1378	>	name = "var/log/dline.log";
1379		size = 50 megabytes;
1380		};
1381
1382		file {
1383		type = gline;
1384	<	name = "/usr/local/ircd/var/log/gline.log";
1384	>	name = "var/log/gline.log";
1385	>	size = 50 megabytes;
1386	>	};
1387	>
1388	>	file {
1389	>	type = xline;
1390	>	name = "var/log/xline.log";
1391	>	size = 50 megabytes;
1392	>	};
1393	>
1394	>	file {
1395	>	type = resv;
1396	>	name = "var/log/resv.log";
1397		size = 50 megabytes;
1398		};
1399
1400		file {
1401		type = debug;
1402	<	name = "/usr/local/ircd/var/log/debug.log";
1402	>	name = "var/log/debug.log";
1403		size = 50 megabytes;
1404		};
1405		};

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)