ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/doc/reference.conf

Comparing ircd-hybrid/trunk/doc/reference.conf (file contents):
Revision 2322 by michael, Sun Jun 23 12:01:30 2013 UTC vs.
Revision 4288 by michael, Sun Jul 20 09:21:35 2014 UTC

#	Line 1 | Line 1
1	<	/* ircd-hybrid reference configuration file
2	<	* Copyright (C) 2000-2013 Hybrid Development Team
1	>	/*
2	>	* This is an example configuration file for ircd-hybrid
3		*
4	<	* Written by ejb, wcampbel, db, leeh and others
4	>	* Copyright (c) 2000-2014 ircd-hybrid development team
5		*
6		* $Id$
7		*/
#	Line 10 | Line 10
10		* ########################################################################
11		* IMPORTANT NOTE:
12		*
13	<	* auth {} blocks MUST be specified in order of precedence.  The first one
14	<	* that matches a user will be used.  So place spoofs first, then specials,
13	>	* auth {} blocks MUST be specified in order of precedence. The first one
14	>	* that matches a user will be used. So place spoofs first, then specials,
15		* then general access.
16		* ########################################################################
17		*
#	Line 23 | Line 23
23		*
24		* Times/durations are written as:
25		*        12 hours 30 minutes 1 second
26	<	*
26	>	*
27		* Valid units of time:
28		*        year, month, week, day, hour, minute, second
29		*
#	Line 39 | Line 39
39		*/
40		serverinfo {
41		/*
42	<	* name: the name of this server.  This cannot be changed at runtime.
42	>	* name: the name of this server. This cannot be changed at runtime.
43		*/
44		name = "hades.arpa";
45
46		/*
47	<	* sid: a server's unique ID.  This is three characters long and must
48	<	* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
47	>	* sid: a server's unique ID. This is three characters long and must
48	>	* be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	+	*
51		* NOTE: The letters must be capitalized. This cannot be changed at runtime.
52		*/
53		sid = "0HY";
#	Line 99 | Line 100 | serverinfo {
100
101		/*
102		* rsa_private_key_file: the path to the file containing the
103	<	* RSA key for cryptlink.
103	>	* RSA key.
104		*
105	<	* Example commands to store a 2048 bit RSA keypair in
105	<	* rsa.key, and the public key in rsa.pub:
105	>	* Example commands to store a 2048 bit RSA key in rsa.key:
106		*
107		*      openssl genrsa -out rsa.key 2048
108	<	*      openssl rsa -in rsa.key -pubout -out rsa.pub
109	<	*      chown <ircd-user>.<ircd.group> rsa.key rsa.pub
108	>	*      chown <ircd-user>.<ircd.group> rsa.key
109		*      chmod 0600 rsa.key
111	–	*      chmod 0644 rsa.pub
110		*/
111	<	#       rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
111	>	#       rsa_private_key_file = "etc/rsa.key";
112
113		/*
114		* ssl_certificate_file: the path to the file containing our
#	Line 132 | Line 130 | serverinfo {
130		*      Common Name: irc.someirc.net
131		*      E-mail: you@domain.com
132		*/
133	<	#       ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
133	>	#       ssl_certificate_file = "etc/cert.pem";
134
135		/*
136	<	* ssl_dh_param_file:
137	<	*
138	<	* Path to the PEM encoded Diffie-Hellman parameter file.
141	<	* DH parameters are required when using ciphers with EDH
142	<	* (ephemeral Diffie-Hellman) key exchange.
136	>	* ssl_dh_param_file: path to the PEM encoded Diffie-Hellman
137	>	* parameter file. DH parameters are required when using
138	>	* ciphers with EDH (ephemeral Diffie-Hellman) key exchange.
139		*
140		* A DH parameter file can be created by running:
141		*
142	<	*      openssl dhparam -out dhparam.pem 1024
142	>	*      openssl dhparam -out dhparam.pem 2048
143		*
144		* Prime size must be at least 1024 bits. Further information
145		* regarding specific OpenSSL dhparam command-line options
146		* can be found in the OpenSSL manual.
147		*/
148	<	#       ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
148	>	#       ssl_dh_param_file = "etc/dhparam.pem";
149
150		/*
151	<	* ssl_cipher_list:
151	>	* ssl_dh_elliptic_curve: defines the curve to use for the
152	>	* Elliptic Curve Diffie-Hellman (ECDH) algorithm.
153	>	*
154	>	* A list of supported curves by OpenSSL can be obtained by running:
155		*
156	<	* List of ciphers to support on _this_ server. Can be used to
157	<	* enforce specific ciphers for incoming SSL/TLS connections.
158	<	* If a client (which also includes incoming server connections) is not
159	<	* capable of using any of the ciphers listed here, the connection will
156	>	*      openssl ecparam -list_curves
157	>	*/
158	>	#       ssl_dh_elliptic_curve = "secp521r1";
159	>
160	>	/*
161	>	* ssl_cipher_list: list of ciphers to support on _this_ server.
162	>	* Can be used to enforce specific ciphers for incoming SSL/TLS
163	>	* connections. If a client (which also includes incoming server connections)
164	>	* is not capable of using any of the ciphers listed here, the connection will
165		* simply be rejected.
166		*
167		* A list of supported ciphers by OpenSSL can be obtained by running:
#	Line 167 | Line 171 | serverinfo {
171		* Multiple ciphers are separated by colons. The order of preference is
172		* from left to right.
173		*/
174	<	#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
174	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
175
176		/*
177	<	* ssl_server_method:
178	<	* ssl_client_method:
177	>	* ssl_message_digest_algorithm: defines what cryptographic hash function
178	>	* to use for generating fingerprint hashes of X.509 certificates.
179	>	* Default is SHA-256 if nothing else is specified.
180	>	*
181	>	* A list of supported message digest algorithms by OpenSSL can be obtained by running:
182		*
183	<	* SSL/TLS methods we provide for incoming (server method) and
177	<	* outgoing (client method) SSL/TLS connections.
178	<	* This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
183	>	*      openssl list-message-digest-algorithms
184		*/
185	<	#       ssl_server_method = tlsv1, sslv3;
181	<	#       ssl_client_method = tlsv1;
185	>	#       ssl_message_digest_algorithm = "sha256";
186		};
187
188		/*
#	Line 205 | Line 209 | class {
209
210		/*
211		* number_per_ip: how many local users are allowed to connect
212	<	* from a single IP address  (optional)
212	>	* from a single IP address (optional)
213		*/
214		number_per_ip = 2;
215
216		/*
217		* max_local: how many local users are allowed to connect
218	<	* from a single ident@host  (optional)
218	>	* from a single ident@host (optional)
219		*/
220		max_local = 2;
221
222		/*
223	<	* max_global: network-wide limit of users per ident@host  (optional)
223	>	* max_global: network-wide limit of users per ident@host (optional)
224		*/
225		max_global = 10;
226
#	Line 226 | Line 230 | class {
230		max_number = 100;
231
232		/*
233	<	* the following lines are optional and allow you to define
233	>	* The following lines are optional and allow you to define
234		* how many users can connect from one /NN subnet.
235		*/
236		cidr_bitlen_ipv4 = 24;
#	Line 254 | Line 258 | class {
258		max_number = 100;
259		sendq = 100 kbytes;
260
261	+
262	+	/*
263	+	* max_channels: maximum number of channels users in this class can join.
264	+	*/
265	+	max_channels = 60;
266	+
267		/*
268		* min_idle: minimum idle time that is shown in /whois.
269		*/
#	Line 298 | Line 308 | class {
308		motd {
309		/*
310		* mask: multiple mask entries are permitted. Mask can either be
311	<	* a class name or a hostname.
311	>	* a class name or a hostname. CIDR is supported.
312		*/
313		mask = "*.at";
314		mask = "*.de";
#	Line 307 | Line 317 | motd {
317		/*
318		* file: path to the actual motd file.
319		*/
320	<	file = "/usr/local/ircd/etc/german.motd";
320	>	file = "etc/german.motd";
321		};
322
323		/*
#	Line 315 | Line 325 | motd {
325		*/
326		listen {
327		/*
328	<	* port: the port to listen on. If no host is specified
329	<	* earlier in the listen {} block, it will listen on all available IPs.
328	>	* port: the port to listen on. If no host is specified earlier
329	>	* in the listen {} block, it will listen on all available IPs.
330		*
331	<	* Ports are separated by commsa; a range may be specified using ".."
331	>	* Ports are separated by commas; a range may be specified using ".."
332		*/
333	<
333	>
334		/* port: listen on all available IP addresses, ports 6665 to 6669 */
335		port = 6665 .. 6669;
336
#	Line 357 | Line 367 | listen {
367		auth {
368		/*
369		* user: the user@host allowed to connect. Multiple user
370	<	* lines are permitted within each auth block.
370	>	* lines are permitted within each auth {} block.
371		*/
372		user = "*@172.16.0.0/12";
373		user = "*test@123D:B567:*";
374
375	<	/* password: an optional password that is required to use this block */
375	>	/* password: an optional password that is required to use this block. */
376		password = "letmein";
377
378		/*
#	Line 377 | Line 387 | auth {
387		*/
388		spoof = "I.still.hate.packets";
389
390	<	/* class: the class the user is placed in */
390	>	/* class: the class the user is placed in. */
391		class = "opers";
392
393		/*
394		* need_password - don't allow users who haven't supplied the correct
395	<	*                 password to connect using another auth{} block
395	>	*                 password to connect using another auth {} block
396		*                 ('&' prefix on /stats I if disabled)
397		* need_ident    - require the user to have identd to connect ('+' prefix on /stats I)
398		* spoof_notice  - enable spoofing notification to admins
#	Line 407 | Line 417 | auth {
417		*/
418		redirserv = "this.is.not.a.real.server";
419		redirport = 6667;
420	<
420	>
421		user = "*.server";
422
423	<	/* class: a class is required even though it is not used */
423	>	/* class: a class is required even though it is not used. */
424		class = "users";
425		};
426
#	Line 428 | Line 438 | operator {
438		name = "sheep";
439
440		/*
441	<	* user: the user@host required for this operator. Multiple
442	<	* user="" lines are supported.
441	>	* user: the user@host required for this operator. Multiple user
442	>	* lines are permitted within each operator {} block.
443		*/
444		user = "*sheep@192.168.0.0/16";
445		user = "*@127.0.0.0/8";
#	Line 452 | Line 462 | operator {
462
463		/*
464		* rsa_public_key_file: the public key for this oper when using Challenge.
465	<	* A password should not be defined when this is used; see
465	>	* A password should not be defined when this is used; see
466		* doc/challenge.txt for more information.
467		*/
468	<	#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
468	>	#       rsa_public_key_file = "etc/oper.pub";
469
470		/*
471		* ssl_certificate_fingerprint: enhances security by additionally checking
#	Line 471 | Line 481 | operator {
481
482		/*
483		* ssl_connection_required: client must be connected over SSL/TLS
484	<	* in order to be able to use this oper{} block.
484	>	* in order to be able to use this operator {} block.
485		* Default is 'no' if nothing else is specified.
486		*/
487		ssl_connection_required = no;
488
489	<	/* class: the class the oper joins when they successfully /oper */
489	>	/* class: the class the oper joins when they successfully /oper or /challenge. */
490		class = "opers";
491
492		/*
493	<	* umodes: the default usermodes opers get when they /oper. If defined,
494	<	* it will override oper_umodes settings in general {}.
493	>	* umodes: the default usermodes opers get when they /oper or /challenge.
494	>	* If defined, it will override oper_umodes settings in general {}.
495		* Available usermodes:
496		*
497		* +b - bots         - See bot and drone flooding notices
#	Line 490 | Line 500 | operator {
500		* +d - debug        - See debugging notices
501		* +e - external     - See remote server connection and split notices
502		* +F - farconnect   - Remote client connection/quit notices
503	<	* +f - full         - See auth{} block full notices
503	>	* +f - full         - See auth {} block full notices
504		* +G - softcallerid - Server Side Ignore for users not on your channels
505		* +g - callerid     - Server Side Ignore (for privmsgs etc)
506		* +H - hidden       - Hides operator status to other users
#	Line 499 | Line 509 | operator {
509		* +k - skill        - See server generated KILL messages
510		* +l - locops       - See LOCOPS messages
511		* +n - nchange      - See client nick changes
512	+	* +p - hidechans    - Hides channel list in WHOIS
513	+	* +q - hideidle     - Hides idle and signon time in WHOIS
514		* +R - nononreg     - Only receive private messages from registered clients
515		* +s - servnotice   - See general server notices
516		* +u - unauth       - See unauthorized client notices
517		* +w - wallop       - See server generated WALLOPS
518		* +y - spy          - See LINKS, STATS, TRACE notices etc.
507	–	* +z - operwall     - See oper generated WALLOPS
519		*/
520	<	umodes = locops, servnotice, operwall, wallop;
520	>	umodes = locops, servnotice, wallop;
521
522		/*
523		* privileges: controls the activities and commands an oper is
524	<	* allowed to do on the server. All options default to no.
524	>	* allowed to do on the server. All options default to 'no'.
525		* Available options:
526		*
527		* module         - allows MODULE
#	Line 527 | Line 538 | operator {
538		* unkline        - allows UNKLINE                    | ('U' flag)
539		* gline          - allows GLINE                      | ('G' flag)
540		* xline          - allows XLINE                      | ('X' flag)
541	+	* unxline        - allows UNXLINE                    |
542		* locops         - allows LOCOPS                     |
543		* globops        - allows GLOBOPS                    |
544		* wallops        - allows WALLOPS                    |
533	–	* operwall       - allows OPERWALL                   | ('L' flag)
545		* rehash         - allows oper to REHASH config      | ('H' flag)
546		* die            - allows DIE                        | ('D' flag)
547		* restart        - allows RESTART                    |
#	Line 538 | Line 549 | operator {
549		* admin          - gives administrator privileges    | ('A' flag)
550		*/
551		flags = kill, kill:remote, connect, connect:remote, kline, unkline,
552	<	xline, globops, restart, die, rehash, admin, operwall, module;
552	>	xline, globops, restart, die, rehash, admin, module;
553		};
554
555		/*
556		* service {}: specifies a server which may act as a network service
557		*
558		* NOTE: it is very important that every server on the network
559	<	*       has the same service{} block.
559	>	*       has the same service {} block.
560		*/
561		service {
562		name = "service.someserver";
#	Line 556 | Line 567 | service {
567		* connect {}: define a server to connect to
568		*/
569		connect {
570	<	/* name: the name of the server */
570	>	/* name: the name of the server. */
571		name = "irc.uplink.com";
572
573		/*
#	Line 586 | Line 597 | connect {
597		*/
598		encrypted = no;
599
600	<	/* port: the port to connect to this server on */
600	>	/* port: the port to connect to this server on. */
601		port = 6666;
602
603		/*
#	Line 601 | Line 612 | connect {
612		*/
613		#       leaf_mask = "*.uk";
614
615	<	/* class: the class this server is in */
615	>	/* class: the class this server is in. */
616		class = "server";
617
618		/*
619	<	* ssl_cipher_list:
620	<	*
621	<	* List of ciphers that the server we are connecting to must support.
611	<	* If the server is not capable of using any of the ciphers listed below,
612	<	* the connection will simply be rejected.
619	>	* ssl_cipher_list: list of ciphers that the server we are connecting to
620	>	* must support. If the server is not capable of using any of the ciphers
621	>	* listed below, the connection will simply be rejected.
622		* Can be used to enforce stronger ciphers, even though this option
623		* is not necessarily required to establish a SSL/TLS connection.
624		*
625		* Multiple ciphers are separated by colons. The order of preference
626		* is from left to right.
627		*/
628	<	#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
628	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
629
630		/*
631		* ssl_certificate_fingerprint: enhances security by additionally checking
#	Line 661 | Line 670 | cluster {
670		*       will not be propagated to clustered servers.
671		*
672		*       Remote servers are not necessarily required to accept
673	<	*       clustered lines, they need a shared{} for *THIS* server
674	<	*       in order to accept them.
673	>	*       clustered lines, they need a shared {} block for *THIS*
674	>	*       server in order to accept them.
675		*/
676		name = "*.arpa";
677
#	Line 751 | Line 760 | exempt {
760		* resv {}:  nicks and channels users may not use/join
761		*/
762		resv { mask = "clone*"; reason = "Clone bots"; };
763	+	resv { mask = "Global"; reason = "Reserved for services"; };
764		resv { mask = "ChanServ"; reason = "Reserved for services"; };
765		resv { mask = "NickServ"; reason = "Reserved for services"; };
766		resv { mask = "OperServ"; reason = "Reserved for services"; };
#	Line 767 | Line 777 | resv {
777		* as channel name masks.
778		*/
779		mask = "#helsinki";
780	<	reason = "Channel is reserved for finnish inhabitants";
780	>	reason = "Channel is reserved for Finnish inhabitants";
781
782		/*
783		* exempt: can be either a ISO 3166 alpha-2 two letter country
#	Line 810 | Line 820 | channel {
820		disable_fake_channels = yes;
821
822		/*
823	<	* knock_delay: The amount of time a user must wait between issuing
824	<	* the knock command.
823	>	* invite_client_count, invite_client_time: how many INVITE commands
824	>	* are permitted per client per invite_client_time.
825		*/
826	<	knock_delay = 5 minutes;
826	>	invite_client_count = 10;
827	>	invite_client_time = 5 minutes;
828
829		/*
830	<	* knock_delay_channel: How often a knock to any specific channel
831	<	* is permitted, regardless of the user sending the knock.
830	>	* knock_client_count, knock_client_time: how many KNOCK commands
831	>	* are permitted per client per knock_client_time.
832		*/
833	<	knock_delay_channel = 1 minute;
833	>	knock_client_count = 1;
834	>	knock_client_time = 5 minutes;
835
836		/*
837	<	* max_chans_per_user: The maximum number of channels a user can
838	<	* join/be on.
837	>	* knock_delay_channel: how often a KNOCK to any specific channel
838	>	* is permitted, regardless of the user sending the KNOCK.
839		*/
840	<	max_chans_per_user = 25;
840	>	knock_delay_channel = 1 minute;
841
842		/*
843	<	* max_chans_per_oper: The maximum number of channels an oper can
844	<	* join/be on.
843	>	* max_channels: the maximum number of channels a user can join/be on.
844	>	* This is a default value which can be overriden with class {} blocks.
845		*/
846	<	max_chans_per_oper = 50;
846	>	max_channels = 25;
847
848		/* max_bans: maximum number of +b/e/I modes in a channel */
849		max_bans = 100;
#	Line 850 | Line 862 | channel {
862		*
863		* Either split users or split servers can activate splitmode, but
864		* both conditions must be met for the ircd to deactivate splitmode.
865	<	*
865	>	*
866		* You may force splitmode to be permanent by /quote set splitmode on
867		*/
868
#	Line 875 | Line 887 | channel {
887
888		/*
889		* serverhide {}:  The serverhide block contains the options regarding
890	<	* to server hiding
890	>	* to server hiding. For more information regarding server hiding,
891	>	* please see doc/serverhide.txt
892		*/
893		serverhide {
894		/*
#	Line 910 | Line 923 | serverhide {
923
924		/*
925		* hide_services: define this if you want to hide the location of
926	<	* services servers that are specified in the service{} block.
926	>	* services servers that are specified in the service {} block.
927		*/
928		hide_services = no;
929
#	Line 945 | Line 958 | general {
958		*/
959		cycle_on_host_change = yes;
960
961	<	/* services_name: servername of nick/channel services */
961	>	/* services_name: servername of nick/channel services. */
962		services_name = "service.someserver";
963
964		/* max_watch: maximum WATCH entries a client can have. */
965	<	max_watch = 60;
965	>	max_watch = 30;
966	>
967	>	/* max_accept: maximum allowed /accept's for +g usermode. */
968	>	max_accept = 30;
969
970		/* gline_enable: enable glines (network-wide temporary klines). */
971		gline_enable = yes;
972
973		/*
974	<	* gline_duration: the amount of time a gline will remain on your
974	>	* gline_duration: the amount of time a G-line will remain on your
975		* server before expiring.
976		*/
977		gline_duration = 1 day;
#	Line 968 | Line 984 | general {
984
985		/*
986		* gline_min_cidr: the minimum required length of a CIDR bitmask
987	<	* for IPv4 based glines.
987	>	* for IPv4 based G-lines.
988		*/
989		gline_min_cidr = 16;
990
991		/*
992		* gline_min_cidr6: the minimum required length of a CIDR bitmask
993	<	* for IPv6 based glines.
993	>	* for IPv6 based G-lines.
994		*/
995		gline_min_cidr6 = 48;
996
997		/*
998	<	* Whether to automatically set mode +i on connecting users.
998	>	* invisible_on_connect: whether to automatically set mode +i on
999	>	* connecting users.
1000		*/
1001		invisible_on_connect = yes;
1002
#	Line 989 | Line 1006 | general {
1006		* automatically to the new nick. kill_chase_time_limit is the maximum
1007		* time following a nickname change that this chasing will apply.
1008		*/
1009	<	kill_chase_time_limit = 90 seconds;
1009	>	kill_chase_time_limit = 30 seconds;
1010
1011		/*
1012		* hide_spoof_ips: if disabled, opers will be allowed to see the real
#	Line 999 | Line 1016 | general {
1016		hide_spoof_ips = yes;
1017
1018		/*
1019	<	* Ignore bogus timestamps from other servers. Yes, this will desync the
1020	<	* network, but it will allow chanops to resync with a valid non TS 0
1019	>	* ignore_bogus_ts: ignore bogus timestamps from other servers.
1020	>	* Yes, this will desync the network, but it will allow chanops
1021	>	* to resync with a valid non TS 0.
1022		*
1023		* This should be enabled network wide, or not at all.
1024		*/
#	Line 1020 | Line 1038 | general {
1038
1039		/*
1040		* default_floodcount: the default value of floodcount that is configurable
1041	<	* via /quote set floodcount. This is the number of lines a user
1042	<	* may send to any other user/channel in one second.
1041	>	* via /quote set floodcount. This is the number of lines a user may send
1042	>	* to any other user/channel in one second.
1043		*/
1044		default_floodcount = 10;
1045
#	Line 1041 | Line 1059 | general {
1059		* min_nonwildcard: the minimum number of non-wildcard characters in
1060		* k/d/g lines placed via the server. K-lines hand-placed are exempt from
1061		* this limit.
1062	<	* Wildcard chars: '.', ':', '*', '?', '@', '!'
1062	>	* Wildcard characters: '.', ':', '*', '?', '@', '!'
1063		*/
1064		min_nonwildcard = 4;
1065
1066		/*
1067		* min_nonwildcard_simple: the minimum number of non-wildcard characters
1068	<	* in gecos bans. Wildcard chars: '*', '?'
1068	>	* in gecos bans. Wildcard characters: '*', '?'
1069		*/
1070		min_nonwildcard_simple = 3;
1071
1054	–	/* max_accept: maximum allowed /accept's for +g usermode. */
1055	–	max_accept = 20;
1056	–
1072		/* anti_nick_flood: enable the nickflood control code. */
1073		anti_nick_flood = yes;
1074
1075	<	/* nick flood: the number of nick changes allowed in the specified period */
1075	>	/* nick flood: the number of nick changes allowed in the specified period. */
1076		max_nick_time = 20 seconds;
1077		max_nick_changes = 5;
1078
#	Line 1068 | Line 1083 | general {
1083		anti_spam_exit_message_time = 5 minutes;
1084
1085		/*
1086	<	* ts delta: the time delta allowed between server clocks before
1087	<	* a warning is given, or before the link is dropped. All servers
1088	<	* should run ntpdate/rdate to keep clocks in sync
1086	>	* ts_warn_delta, ts_max_delta: the time delta allowed between server
1087	>	* clocks before a warning is given, or before the link is dropped.
1088	>	* All servers should run ntpdate/rdate to keep clocks in sync.
1089		*/
1090	<	ts_warn_delta = 30 seconds;
1091	<	ts_max_delta = 5 minutes;
1090	>	ts_warn_delta = 10 seconds;
1091	>	ts_max_delta = 2 minutes;
1092
1093		/*
1094	<	* warn_no_nline: warn opers about servers that try to connect but
1095	<	* for which we don't have a connect {} block. Twits with misconfigured
1096	<	* servers can become really annoying with this enabled.
1094	>	* warn_no_connect_block: warn opers about servers that try to connect
1095	>	* but for which we don't have a connect {} block. Twits with
1096	>	* misconfigured servers can become really annoying with this enabled.
1097		*/
1098	<	warn_no_nline = yes;
1098	>	warn_no_connect_block = yes;
1099
1100		/*
1101		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1102		* operators and administrators. Doing so is a good idea in case
1103	<	* there are any exempted (exempt{}) server IPs you don't want to
1103	>	* there are any exempted (exempt {}) server IPs you don't want to
1104		* see leaked.
1105		*/
1106		stats_e_disabled = no;
1107
1108	<	/* stats_o_oper only: make stats o (opers) oper only */
1108	>	/* stats_o_oper_only: make stats o (opers) oper only. */
1109		stats_o_oper_only = yes;
1110
1111	<	/* stats_P_oper_only: make stats P (ports) oper only */
1111	>	/* stats_P_oper_only: make stats P (ports) oper only. */
1112		stats_P_oper_only = yes;
1113
1114	<	/* stats_u_oper_only: make stats u (uptime) oper only */
1114	>	/* stats_u_oper_only: make stats u (uptime) oper only. */
1115		stats_u_oper_only = no;
1116
1117		/*
1118	<	* stats i oper only: make stats i (auth {}) oper only. Set to:
1119	<	*     yes    - show users no auth blocks, made oper only.
1120	<	*     masked - show users the first matching auth block
1121	<	*     no     - show users all auth blocks.
1118	>	* stats_i_oper_only: make stats i (auth {}) oper only. Set to:
1119	>	*     yes    - show users no auth {} blocks, made oper only
1120	>	*     masked - show users the first matching auth {} block
1121	>	*     no     - show users all auth {} blocks
1122		*/
1123		stats_i_oper_only = yes;
1124
1125		/*
1126		* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1127	<	*     yes    - show users no auth blocks, made oper only
1128	<	*     masked - show users the first matching auth block
1129	<	*     no     - show users all auth blocks.
1127	>	*     yes    - show users no auth {} blocks, made oper only
1128	>	*     masked - show users the first matching auth {} block
1129	>	*     no     - show users all auth {} blocks
1130		*/
1131		stats_k_oper_only = yes;
1132
#	Line 1130 | Line 1145 | general {
1145		/*
1146		* pace_wait_simple: minimum time required between use of less
1147		* intensive commands
1148	<	* (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1148	>	* (ADMIN, HELP, LUSERS, VERSION, remote WHOIS)
1149		*/
1150		pace_wait_simple = 1 second;
1151
1152		/*
1153		* pace_wait: minimum time required between use of more intensive commands
1154	<	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1154	>	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, WHOWAS)
1155		*/
1156		pace_wait = 10 seconds;
1157
#	Line 1147 | Line 1162 | general {
1162		short_motd = no;
1163
1164		/*
1165	<	* ping_cookie: require clients to respond exactly to a ping command,
1165	>	* ping_cookie: require clients to respond exactly to a PING command,
1166		* can help block certain types of drones and FTP PASV mode spoofing.
1167		*/
1168		ping_cookie = no;
#	Line 1157 | Line 1172 | general {
1172
1173		/*
1174		* true_no_oper_flood: completely eliminate flood limits for opers
1175	<	* and for clients with can_flood = yes in their auth {} blocks.
1175	>	* and for clients with 'can_flood' in their auth {} blocks.
1176		*/
1177		true_no_oper_flood = yes;
1178
1179		/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1180		oper_pass_resv = yes;
1181
1182	<	/* REMOVE ME.  The following line checks that you have been reading. */
1182	>	/* REMOVE ME. The following line checks that you have been reading. */
1183		havent_read_conf = 1;
1184
1185		/*
#	Line 1182 | Line 1197 | general {
1197		* +d - debug        - See debugging notices
1198		* +e - external     - See remote server connection and split notices
1199		* +F - farconnect   - Remote client connection/quit notices
1200	<	* +f - full         - See auth{} block full notices
1200	>	* +f - full         - See auth {} block full notices
1201		* +G - softcallerid - Server Side Ignore for users not on your channels
1202		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1203		* +H - hidden       - Hides operator status to other users
1204	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
1190	<	*                     a channel
1204	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
1205		* +j - rej          - See rejected client notices
1206		* +k - skill        - See server generated KILL messages
1207		* +l - locops       - See LOCOPS messages
1208		* +n - nchange      - See client nick changes
1209	+	* +p - hidechans    - Hides channel list in WHOIS
1210	+	* +q - hideidle     - Hides idle and signon time in WHOIS
1211		* +R - nononreg     - Only receive private messages from registered clients
1212		* +s - servnotice   - See general server notices
1213		* +u - unauth       - See unauthorized client notices
1214		* +w - wallop       - See server generated WALLOPS
1215		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1200	–	* +z - operwall     - See oper generated WALLOPS
1216		*/
1217
1218	<	/* oper_only_umodes: usermodes only opers may set */
1218	>	/* oper_only_umodes: usermodes only opers may set. */
1219		oper_only_umodes = bots, cconn, debug, full, hidden, skill,
1220	<	nchange, rej, spy, external, operwall,
1221	<	locops, unauth, farconnect;
1207	<
1208	<	/* oper_umodes: default usermodes opers get when they /oper */
1209	<	oper_umodes = bots, locops, servnotice, operwall, wallop;
1220	>	nchange, rej, spy, external,
1221	>	locops, unauth, farconnect;
1222
1223	<	/*
1224	<	* use_egd: if your system does not have *random devices yet you
1213	<	* want to use OpenSSL and encrypted links, enable this. Beware -
1214	<	* EGD is *very* CPU intensive when gathering data for its pool.
1215	<	*/
1216	<	#       use_egd = yes;
1223	>	/* oper_umodes: default usermodes opers get when they /oper or /challenge. */
1224	>	oper_umodes = bots, locops, servnotice, wallop;
1225
1226		/*
1227	<	* egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1228	<	* which automatically finds the path.
1227	>	* throttle_count: the maximum number of connections from the same
1228	>	* IP address allowed in throttle_time duration.
1229		*/
1230	<	#       egdpool_path = "/var/run/egd-pool";
1230	>	throttle_count = 1;
1231
1232		/*
1233		* throttle_time: the minimum amount of time required between
1234	<	* connections from the same IP address. exempt {} blocks are excluded
1235	<	* from this throttling.
1234	>	* connections from the same IP address. exempt {} blocks are
1235	>	* excluded from this throttling.
1236		* Offers protection against flooders who reconnect quickly.
1237		* Set to 0 to disable.
1238		*/
1239	<	throttle_time = 10;
1239	>	throttle_time = 2 seconds;
1240		};
1241
1242		modules {
#	Line 1236 | Line 1244 | modules {
1244		* path: other paths to search for modules specified below
1245		* and in "/module load".
1246		*/
1247	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1248	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1247	>	path = "lib/ircd-hybrid/modules";
1248	>	path = "lib/ircd-hybrid/modules/autoload";
1249
1250		/* module: the name of a module to load on startup/rehash. */
1251		#       module = "some_module.la";
#	Line 1252 | Line 1260 | log {
1260
1261		file {
1262		type = oper;
1263	<	name = "/usr/local/ircd/var/log/oper.log";
1263	>	name = "var/log/oper.log";
1264		size = unlimited;
1265		};
1266
1267		file {
1268		type = user;
1269	<	name = "/usr/local/ircd/var/log/user.log";
1269	>	name = "var/log/user.log";
1270		size = 50 megabytes;
1271		};
1272
1273		file {
1274		type = kill;
1275	<	name = "/usr/local/ircd/var/log/kill.log";
1275	>	name = "var/log/kill.log";
1276		size = 50 megabytes;
1277		};
1278
1279		file {
1280		type = kline;
1281	<	name = "/usr/local/ircd/var/log/kline.log";
1281	>	name = "var/log/kline.log";
1282		size = 50 megabytes;
1283		};
1284
1285		file {
1286		type = dline;
1287	<	name = "/usr/local/ircd/var/log/dline.log";
1287	>	name = "var/log/dline.log";
1288		size = 50 megabytes;
1289		};
1290
1291		file {
1292		type = gline;
1293	<	name = "/usr/local/ircd/var/log/gline.log";
1293	>	name = "var/log/gline.log";
1294	>	size = 50 megabytes;
1295	>	};
1296	>
1297	>	file {
1298	>	type = xline;
1299	>	name = "var/log/xline.log";
1300	>	size = 50 megabytes;
1301	>	};
1302	>
1303	>	file {
1304	>	type = resv;
1305	>	name = "var/log/resv.log";
1306		size = 50 megabytes;
1307		};
1308
1309		file {
1310		type = debug;
1311	<	name = "/usr/local/ircd/var/log/debug.log";
1311	>	name = "var/log/debug.log";
1312		size = 50 megabytes;
1313		};
1314		};

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)