ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/doc/reference.conf

Comparing:
ircd-hybrid-8/etc/example.conf (file contents), Revision 1157 by michael, Tue Aug 9 22:03:59 2011 UTC vs.
ircd-hybrid/trunk/doc/reference.conf (file contents), Revision 2210 by michael, Wed Jun 5 21:15:55 2013 UTC

#	Line 1 | Line 1
1	<	/* doc/example.conf - ircd-hybrid-7 Example configuration file
2	<	* Copyright (C) 2000-2011 Hybrid Development Team
1	>	/* ircd-hybrid reference configuration file
2	>	* Copyright (C) 2000-2013 Hybrid Development Team
3		*
4		* Written by ejb, wcampbel, db, leeh and others
5	–	* Other example configurations can be found in the source dir under
6	–	* etc/.
5		*
6		* $Id$
7		*/
8
9	<	/* IMPORTANT NOTES:
9	>	/*
10	>	* ########################################################################
11	>	* IMPORTANT NOTES:
12		*
13		* auth {} blocks MUST be specified in order of precedence.  The first one
14		* that matches a user will be used.  So place spoofs first, then specials,
15		* then general access.
16	+	* ########################################################################
17		*
18		* Shell style (#), C++ style (//) and C style comments are supported.
19		*
#	Line 24 | Line 25
25		*        12 hours 30 minutes 1 second
26		*
27		* Valid units of time:
28	<	*        month, week, day, hour, minute, second
28	>	*        year, month, week, day, hour, minute, second
29		*
30		* Valid units of size:
31		*        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
#	Line 32 | Line 33
33		* Sizes and times may be singular or plural.
34		*/
35
36	<	/* EFNET NOTE:
36	<	*
37	<	* This config file is NOT suitable for EFNet.  EFNet admins should use
38	<	* example.efnet.conf
39	<	*/
40	<
36	>
37		/*
38	<	* serverinfo {}:  contains information about the server. (OLD M:)
38	>	* serverinfo {}:  contains information about the server
39		*/
40		serverinfo {
41		/*
#	Line 51 | Line 47 | serverinfo {
47		* sid: a server's unique ID.  This is three characters long and must
48		* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	<	* NOTE: The letters must be capitalized.  This cannot be changed at runtime.
50	>	* NOTE: The letters must be capitalized. This cannot be changed at runtime.
51		*/
52	<	sid = "_CHANGE_ME_";
52	>	sid = "0HY";
53
54		/*
55	<	* description: the description of the server.  '[' and ']' may not
60	<	* be used here for compatibility with older servers.
55	>	* description: the description of the server.
56		*/
57	<	description = "hybrid-7 test server";
57	>	description = "ircd-hybrid test server";
58
59		/*
60		* network info: the name and description of the network this server
61	<	* is on.  Shown in the 005 reply and used with serverhiding.
61	>	* is on. Shown in the 005 reply and used with serverhiding.
62		*/
63		network_name = "MyNet";
64		network_desc = "This is My Network";
#	Line 78 | Line 73 | serverinfo {
73		* vhost: the IP to bind to when we connect outward to ipv4 servers.
74		* This should be an ipv4 IP only, or "*" for INADDR_ANY.
75		*/
76	<	#vhost = "192.169.0.1";
76	>	#       vhost = "192.169.0.1";
77
78		/*
79		* vhost6: the IP to bind to when we connect outward to ipv6 servers.
80		* This should be an ipv6 IP only, or "*" for INADDR_ANY.
81		*/
82	<	#vhost6 = "3ffe:80e8:546::2";
82	>	#       vhost6 = "3ffe:80e8:546::2";
83
84	<	/* max_clients: the maximum number of clients allowed to connect */
84	>	/* max_clients: the maximum number of clients allowed to connect. */
85		max_clients = 512;
86
87		/*
88	+	* max_nick_length: only applies to local clients. Must be in the
89	+	* range of 9 to 30. Default is 9 if nothing else is specified.
90	+	*/
91	+	max_nick_length = 9;
92	+
93	+	/*
94	+	* max_topic_length: only applies to topics set by local clients.
95	+	* Must be in the range of 80 to 300. Default is 80 if nothing
96	+	* else is specified.
97	+	*/
98	+	max_topic_length = 160;
99	+
100	+	/*
101		* rsa_private_key_file: the path to the file containing our
102		* rsa key for cryptlink.
103		*
104		* Example command to store a 2048 bit RSA keypair in
105		* rsa.key, and the public key in rsa.pub:
106		*
107	<	*      openssl genrsa -out rsa.key 2048
107	>	*      openssl genrsa -out rsa.key 2048
108		*      openssl rsa -in rsa.key -pubout -out rsa.pub
109		*      chown <ircd-user>.<ircd.group> rsa.key rsa.pub
110		*      chmod 0600 rsa.key
111		*      chmod 0644 rsa.pub
112		*/
113	<	#rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
113	>	#       rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
114
115		/*
116		* ssl_certificate_file: the path to the file containing our
117		* ssl certificate for encrypted client connection.
118		*
119		* This assumes your private RSA key is stored in rsa.key. You
120	<	* MUST have an RSA key in order to generate the certificate
120	>	* MUST have an RSA key in order to generate the certificate.
121	>	*
122	>	* Example command:
123		*
124		*      openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
125		*
#	Line 122 | Line 132 | serverinfo {
132		*      Common Name: irc.someirc.net
133		*      E-mail: you@domain.com
134		*/
135	<	#ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
135	>	#       ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
136
137		/*
138	<	* ssl_server_protocol:
139	<	* SSL/TLS protocols we provide for incoming secure connections.
138	>	* ssl_dh_param_file:
139	>	*
140	>	* Path to the PEM encoded Diffie-Hellman parameter file.
141	>	* DH parameters are strictly required when using ciphers
142	>	* with EDH (ephemeral Diffie-Hellman) key exchange.
143	>	*
144	>	* A DH parameter file can be created by running:
145	>	*
146	>	*      openssl dhparam -out dhparam.pem 1024
147	>	*
148	>	* Prime size must be at least 1024 bits. Further information
149	>	* regarding specific OpenSSL dhparam command-line options
150	>	* can be found in the OpenSSL manual.
151	>	*/
152	>	#       ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
153	>
154	>	/*
155	>	* ssl_cipher_list:
156	>	*
157	>	* List of ciphers that are supported by _this_ server. Can be used to
158	>	* enforce specific ciphers for incoming SSL/TLS connections.
159	>	* If a client (which also includes incoming server connections) isn't
160	>	* capable of any cipher listed below, the connection will simply be
161	>	* rejected.
162	>	*
163	>	* A list of supported ciphers can be obtained by running:
164	>	*
165	>	*      openssl ciphers -ssl3 -tls1 -v
166	>	*
167	>	* Multiple ciphers are separated by colons. The order of preference is
168	>	* from left to right.
169	>	*/
170	>	#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
171	>
172	>	/*
173	>	* ssl_server_method:
174	>	* ssl_client_method:
175	>	*
176	>	* SSL/TLS methods we provide for incoming (server method) and
177	>	* outgoing (client method) SSL/TLS connections.
178		* This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
131	–	* SSLv2 is not suppported. This cannot be changed at runtime.
179		*/
180	<	#ssl_server_protocol = sslv3, tlsv1;
180	>	#       ssl_server_method = tlsv1, sslv3;
181	>	#       ssl_client_method = tlsv1;
182		};
183
184		/*
185	<	* admin {}:  contains admin information about the server. (OLD A:)
185	>	* admin {}:  contains admin information about the server
186		*/
187		admin {
188		name = "Smurf target";
#	Line 143 | Line 191 | admin {
191		};
192
193		/*
194	<	* log {}:  contains information about logfiles.
147	<	*/
148	<	log {
149	<	/* Do you want to enable logging to ircd.log? */
150	<	use_logging = yes;
151	<
152	<	/*
153	<	* logfiles: the logfiles to use for user connects, /oper uses,
154	<	* and failed /oper.  These files must exist for logging to be used.
155	<	*/
156	<	fname_userlog = "logs/userlog";
157	<	fname_operlog = "logs/operlog";
158	<	fname_killlog = "logs/kill";
159	<	fname_klinelog = "logs/kline";
160	<	fname_glinelog = "logs/gline";
161	<
162	<	/*
163	<	* log_level: the amount of detail to log in ircd.log.  The
164	<	* higher, the more information is logged.  May be changed
165	<	* once the server is running via /quote SET LOG.  Either:
166	<	* L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
167	<	*/
168	<	log_level = L_INFO;
169	<	};
170	<
171	<	/*
172	<	* class {}:  contains information about classes for users (OLD Y:)
194	>	* class {}:  contains information about classes for users
195		*/
196		class {
197	<	/* name: the name of the class.  classes are text now */
197	>	/* name: the name of the class. */
198		name = "users";
199
200		/*
#	Line 205 | Line 227 | class {
227
228		/*
229		* the following lines are optional and allow you to define
230	<	* how many users can connect from one /NN subnet
230	>	* how many users can connect from one /NN subnet.
231		*/
232		cidr_bitlen_ipv4 = 24;
233		cidr_bitlen_ipv6 = 120;
234		number_per_cidr = 16;
235
236		/*
237	<	* sendq: the amount of data allowed in a clients queue before
237	>	* sendq: the amount of data allowed in a clients send queue before
238		* they are dropped.
239		*/
240		sendq = 100 kbytes;
241	+
242	+	/*
243	+	* recvq: maximum amount of data in a clients receive queue before
244	+	* they are dropped for flooding. Defaults to 2560 if the chosen
245	+	* value isn't within the range of 512 to 8000.
246	+	*/
247	+	recvq = 2560 bytes;
248		};
249
250		class {
#	Line 223 | Line 252 | class {
252		ping_time = 90 seconds;
253		number_per_ip = 10;
254		max_number = 100;
255	<	sendq = 100kbytes;
255	>	sendq = 100 kbytes;
256	>
257	>	/*
258	>	* min_idle: minimum idle time that is shown in /whois.
259	>	*/
260	>	min_idle = 3 hours;
261	>
262	>	/*
263	>	* max_idle: maximum idle time that is shown in /whois.
264	>	*/
265	>	max_idle = 8 hours;
266	>
267	>	/*
268	>	* flags:
269	>	*
270	>	* random_idle          - idle time is randomly selected within the
271	>	*                        range of min_idle to max_idle
272	>	* hide_idle_from_opers - fake idle time will be shown to operators, too
273	>	*/
274	>	flags = random_idle, hide_idle_from_opers;
275		};
276
277		class {
#	Line 231 | Line 279 | class {
279		ping_time = 90 seconds;
280
281		/*
282	<	* ping_warning: how fast a server must reply to a PING before
235	<	* a warning to opers is generated.
236	<	*/
237	<	ping_warning = 15 seconds;
238	<
239	<	/*
240	<	* connectfreq: only used in server classes.  Specifies the delay
282	>	* connectfreq: only used in server classes. Specifies the delay
283		* between autoconnecting to servers.
284		*/
285		connectfreq = 5 minutes;
286
287	<	/* max number: the amount of servers to autoconnect to */
287	>	/* max number: the amount of servers to autoconnect to. */
288		max_number = 1;
289
290	<	/* sendq: servers need a higher sendq as they send more data */
290	>	/* sendq: servers need a higher sendq as they send more data. */
291		sendq = 2 megabytes;
292		};
293
294		/*
295	<	* listen {}:  contains information about the ports ircd listens on (OLD P:)
295	>	* motd {}: Allows to show a different MOTD to a client
296	>	* depending on its origin. Applies to local users only.
297	>	*/
298	>	motd {
299	>	/*
300	>	* mask: multiple mask entries are permitted. Mask can either be
301	>	* a class name or a hostname.
302	>	*/
303	>	mask = "*.at";
304	>	mask = "*.de";
305	>	mask = "*.ch";
306	>
307	>	/*
308	>	* file: path to the actual motd file.
309	>	*/
310	>	file = "/usr/local/ircd/etc/german.motd";
311	>	};
312	>
313	>	/*
314	>	* listen {}:  contains information about the ports ircd listens on
315		*/
316		listen {
317		/*
318	<	* port: the specific port to listen on.  If no host is specified
318	>	* port: the specific port to listen on. If no host is specified
319		* before, it will listen on all available IPs.
320		*
321		* Ports are separated via a comma, a range may be specified using ".."
#	Line 267 | Line 328 | listen {
328		* Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
329		* unless you are an administrator.
330		*
331	<	* NOTE: The "flags" directive has to come before "port".  Always!
331	>	* NOTE: The "flags" directive has to come before "port". Always!
332		*
333		* Currently available flags are:
334		*
335	<	*  ssl    - Port is for SSL client connections only
335	>	*  ssl    - Port may only accept TLS/SSL connections
336		*  server - Only server connections are permitted
337	<	*  hidden - Port is hidden from /stats P
337	>	*  hidden - Port is hidden from /stats P, unless you're an admin
338		*/
339		flags = hidden, ssl;
340		host = "192.168.0.1";
#	Line 281 | Line 342 | listen {
342
343		/*
344		* host: set a specific IP/host the ports after the line will listen
345	<	* on.  This may be ipv4 or ipv6.
345	>	* on. This may be ipv4 or ipv6.
346		*/
347		host = "1.2.3.4";
348		port = 7000, 7001;
#	Line 291 | Line 352 | listen {
352		};
353
354		/*
355	<	* auth {}:  allow users to connect to the ircd (OLD I:)
355	>	* auth {}:  allow users to connect to the ircd
356		*/
357		auth {
358		/*
359	<	* user: the user@host allowed to connect.  Multiple IPv4/IPv6 user
359	>	* user: the user@host allowed to connect. Multiple user
360		* lines are permitted per auth block.
361		*/
362		user = "*@172.16.0.0/12";
#	Line 311 | Line 372 | auth {
372		encrypted = yes;
373
374		/*
375	<	* spoof: fake the users host to this.  This is free-form,
376	<	* just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
375	>	* spoof: fake the users host to this. This is free-form, just do
376	>	* everyone a favor and don't abuse it. ('=' prefix on /stats I)
377		*/
378		spoof = "I.still.hate.packets";
379
#	Line 320 | Line 381 | auth {
381		class = "opers";
382
383		/*
384	<	* need_password: don't allow users who haven't supplied the correct
385	<	*                password to connect using another auth{} block
386	<	*                ('&' prefix on /stats I if disabled)
387	<	* need_ident:    require the user to have identd to connect ('+' prefix on /stats I)
388	<	* spoof_notice:  enable spoofing notification to admins
389	<	* exceed_limit:  allow a user to exceed class limits ('>' prefix on /stats I)
390	<	* kline_exempt:  exempt this user from k/glines ('^' prefix on /stats I)
391	<	* gline_exempt:  exempt this user from glines ('_' prefix on /stats I)
392	<	* resv_exempt:   exempt this user from resvs ('$' prefix on /stats I)
393	<	* no_tilde:      remove ~ from a user with no ident ('-' prefix on /stats I)
394	<	* can_flood:     allow this user to exceed flood limits ('|' prefix on /stats I)
395	<	* can_idle:      exempt this user from idle restrictions ('<' prefix on /stats I)
384	>	* need_password - don't allow users who haven't supplied the correct
385	>	*                 password to connect using another auth{} block
386	>	*                 ('&' prefix on /stats I if disabled)
387	>	* need_ident    - require the user to have identd to connect ('+' prefix on /stats I)
388	>	* spoof_notice  - enable spoofing notification to admins
389	>	* exceed_limit  - allow a user to exceed class limits ('>' prefix on /stats I)
390	>	* kline_exempt  - exempt this user from k/glines ('^' prefix on /stats I)
391	>	* gline_exempt  - exempt this user from glines ('_' prefix on /stats I)
392	>	* resv_exempt   - exempt this user from resvs ('$' prefix on /stats I)
393	>	* no_tilde      - remove ~ from a user with no ident ('-' prefix on /stats I)
394	>	* can_flood     - allow this user to exceed flood limits ('|' prefix on /stats I)
395	>	* webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
396	>	*                 ('<' prefix on /stats I)
397		*/
398		flags = need_password, spoof_notice, exceed_limit, kline_exempt,
399	<	gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
399	>	gline_exempt, resv_exempt, no_tilde, can_flood;
400		};
401
402		auth {
403		/*
404	<	* redirect: the server and port to redirect a user to.  A user does
405	<	* not have to obey the redirection, the ircd just suggests an alternative
404	>	* redirect: the server and port to redirect a user to. A user does not
405	>	* have to obey the redirection, the ircd just suggests an alternative
406		* server for them.
407		*/
408		redirserv = "this.is.not.a.real.server";
#	Line 359 | Line 421 | auth {
421		};
422
423		/*
424	<	* operator {}:  defines ircd operators. (OLD O:)
363	<	*
364	<	* ircd-hybrid no longer supports local operators, privileges are
365	<	* controlled via flags.
424	>	* operator {}:  defines ircd operators
425		*/
426		operator {
427		/* name: the name of the oper */
428	<	/* NOTE: operator "opername"{} is also supported */
370	<	name = "god";
428	>	name = "sheep";
429
430		/*
431	<	* user: the user@host required for this operator.  CIDR is not
432	<	* supported.  Multiple user="" lines are supported.
431	>	* user: the user@host required for this operator. Multiple
432	>	* user="" lines are supported.
433		*/
434	<	user = "*god@*";
435	<	user = "*@127.0.0.1";
434	>	user = "*sheep@192.168.0.0/16";
435	>	user = "*@127.0.0.0/8";
436
437		/*
438	<	* password: the password required to oper.  By default this will
438	>	* password: the password required to oper. By default this will
439		* need to be encrypted by using the provided mkpasswd tool.
440		* Several password hash algorithms are available depending
441		* on your system's crypt() implementation. For example, a modern
#	Line 403 | Line 461 | operator {
461		class = "opers";
462
463		/*
464	<	* umodes: default usermodes opers get when they /oper.  If defined,
464	>	* umodes: default usermodes opers get when they /oper. If defined,
465		* it will override oper_umodes settings in general {}.
466		* Available usermodes:
467		*
468		* +b - bots         - See bot and drone flooding notices
469		* +c - cconn        - Client connection/quit notices
412	–	* +C - cconn_full   - Client connection/quit notices full
470		* +D - deaf         - Don't receive channel messages
471		* +d - debug        - See debugging notices
472	<	* +f - full         - See I: line full notices
472	>	* +e - external     - See remote server connection and split notices
473	>	* +F - farconnect   - Remote client connection/quit notices
474	>	* +f - full         - See auth{} block full notices
475		* +G - softcallerid - Server Side Ignore for users not on your channels
476		* +g - callerid     - Server Side Ignore (for privmsgs etc)
477	+	* +H - hidden       - Hides operator status to other users
478		* +i - invisible    - Not shown in NAMES or WHO unless you share a
479		*                     a channel
480	+	* +j - rej          - See rejected client notices
481		* +k - skill        - See server generated KILL messages
482		* +l - locops       - See LOCOPS messages
483		* +n - nchange      - See client nick changes
484	<	* +r - rej          - See rejected client notices
484	>	* +R - nononreg     - Only receive private messages from registered clients
485		* +s - servnotice   - See general server notices
486		* +u - unauth       - See unauthorized client notices
487		* +w - wallop       - See server generated WALLOPS
427	–	* +x - external     - See remote server connection and split notices
488		* +y - spy          - See LINKS, STATS, TRACE notices etc.
489		* +z - operwall     - See oper generated WALLOPS
490		*/
491	<	#       umodes = locops, servnotice, operwall, wallop;
491	>	umodes = locops, servnotice, operwall, wallop;
492
493		/*
494		* privileges: controls the activities and commands an oper is
495	<	* allowed to do on the server.  All options default to no.
495	>	* allowed to do on the server. All options default to no.
496		* Available options:
497		*
498	<	* global_kill:  allows remote users to be /KILL'd (OLD 'O' flag)
499	<	* remote:       allows remote SQUIT and CONNECT   (OLD 'R' flag)
500	<	* remoteban:    allows remote KLINE/UNKLINE
501	<	* kline:        allows KILL, KLINE and DLINE      (OLD 'K' flag)
502	<	* unkline:      allows UNKLINE and UNDLINE        (OLD 'U' flag)
503	<	* gline:        allows GLINE                      (OLD 'G' flag)
504	<	* xline:        allows XLINE                      (OLD 'X' flag)
505	<	* operwall:     allows OPERWALL
506	<	* nick_changes: allows oper to see nickchanges    (OLD 'N' flag)
507	<	*               via usermode +n
508	<	* rehash:       allows oper to REHASH config      (OLD 'H' flag)
509	<	* die:          allows DIE and RESTART            (OLD 'D' flag)
510	<	* admin:        gives admin privileges.  admins
511	<	*               may (un)load modules and see the
512	<	*               real IPs of servers.
513	<	* hidden_admin: same as 'admin', but noone can recognize you as
514	<	*               being an admin
515	<	* hidden_oper:  not shown in /stats p (except for other operators)
516	<	*
517	<	* A flag can be negated with ~ i.e.
518	<	* flags = ~remote;
498	>	* module         - allows MODULE
499	>	* connect        - allows local CONNECT              | ('P' flag)
500	>	* connect:remote - allows remote CONNECT             | ('Q' flag)
501	>	* squit          - allows local SQUIT                | ('R' flag)
502	>	* squit:remote   - allows remote SQUIT               | ('S' flag)
503	>	* kill           - allows to KILL local clients      | ('N' flag)
504	>	* kill:remote    - allows remote users to be /KILL'd | ('O' flag)
505	>	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
506	>	* dline          - allows DLINE                      |
507	>	* undline        - allows UNDLINE                    |
508	>	* kline          - allows KLINE                      | ('K' flag)
509	>	* unkline        - allows UNKLINE                    | ('U' flag)
510	>	* gline          - allows GLINE                      | ('G' flag)
511	>	* xline          - allows XLINE                      | ('X' flag)
512	>	* locops         - allows LOCOPS                     |
513	>	* globops        - allows GLOBOPS                    |
514	>	* wallops        - allows WALLOPS                    |
515	>	* operwall       - allows OPERWALL                   | ('L' flag)
516	>	* rehash         - allows oper to REHASH config      | ('H' flag)
517	>	* die            - allows DIE                        | ('D' flag)
518	>	* restart        - allows RESTART                    |
519	>	* set            - allows SET                        |
520	>	* admin          - gives administrator privileges    | ('A' flag)
521		*/
522	<	flags = global_kill, remote, kline, unkline, xline,
523	<	die, rehash, nick_changes, admin, operwall;
522	>	flags = kill, kill:remote, connect, connect:remote, kline, unkline,
523	>	xline, globops, restart, die, rehash, admin, operwall, module;
524		};
525
526	+	/*
527	+	* service {}: specifies what server may act as a network service
528	+	*
529	+	* NOTE: it is absolutely important that every single server on the network
530	+	*       has the same service{} block.
531	+	*/
532		service {
533		name = "service.someserver";
534	<	name = "stats.someserver;
534	>	name = "stats.someserver";
535		};
536
537		/*
538	<	* connect {}:  controls servers we connect to (OLD C:, N:, H:, L:)
538	>	* connect {}:  controls servers we connect to
539		*/
540		connect {
541		/* name: the name of the server */
542		name = "irc.uplink.com";
543
544		/*
545	<	* host: the host or IP to connect to.  If a hostname is used it
545	>	* host: the host or IP to connect to. If a hostname is used it
546		* must match the reverse dns of the server.
547		*/
548		host = "192.168.0.1";
#	Line 503 | Line 571 | connect {
571		port = 6666;
572
573		/*
574	<	* hub_mask: the mask of servers that this server may hub.  Multiple
575	<	* entries are permitted
574	>	* hub_mask: the mask of servers that this server may hub. Multiple
575	>	* entries are permitted.
576		*/
577		hub_mask = "*";
578
579		/*
580	<	* leaf_mask: the mask of servers this server may not hub.  Multiple
581	<	* entries are permitted.  Useful for forbidding EU -> US -> EU routes.
580	>	* leaf_mask: the mask of servers this server may not hub. Multiple
581	>	* entries are permitted. Useful for forbidding EU -> US -> EU routes.
582		*/
583		#       leaf_mask = "*.uk";
584
#	Line 518 | Line 586 | connect {
586		class = "server";
587
588		/*
589	<	* autoconn:    controls whether we autoconnect to this server or not,
590	<	*              dependent on class limits.  By default, this is disabled.
591	<	* compressed:  controls whether traffic is compressed via ziplinks.
592	<	*              By default, this is disabled
593	<	* cryptlink:   enable full encryption for all data passing between our
594	<	*              server and this link and rsa authentication.
595	<	* burst_away:  This will send the /away string that users have set
596	<	*              on the server burst.  Note this can be a lot of data
597	<	*              and slow down your server burst.
598	<	* topicburst:  Send topics to this server during channel burst.  Works
531	<	*              only if the server we are connecting to is capable
532	<	*              of TBURST/TB.
533	<	*/
534	<	#       flags = autoconn, compressed, cryptlink, burst_away, topicburst;
535	<	};
536	<
537	<	connect {
538	<	name = "encrypted.auth.example";
539	<	host = "some.host.somewhere";
540	<	port = 6667;
541	<
542	<	flags = cryptlink;
543	<
544	<	/*
545	<	* rsa_public_key_file: the path to the public keyfile of the server.
546	<	* Used instead of passwords.
589	>	* ssl_cipher_list:
590	>	*
591	>	* List of ciphers that the server we are connecting to must support.
592	>	* If the server isn't capable of any cipher listed below, the
593	>	* connection will simply be rejected.
594	>	* Can be used to enforce stronger ciphers, even though this option
595	>	* is not necessarily required to establish a SSL/TLS connection.
596	>	*
597	>	* Multiple ciphers are separated by colons. The order of preference
598	>	* is from left to right.
599		*/
600	<	rsa_public_key_file = "etc/remote.server.keyfile";
600	>	#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
601
602		/*
603	<	* cipher preference: set the preferred cipher for this link
604	<	*
605	<	* Available ciphers are:
554	<	*      BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
555	<	*      RC5.12/128 RC5.8/128 3DES/168 DES/56
556	<	*
557	<	* NOTE:  Some ciphers may not be supported by your OpenSSL.
558	<	*        Check the output from 'configure' for available ciphers.
559	<	*
560	<	* NOTE2: To help you decide what cipher to use, tools/encspeed
561	<	*        will show you approximately how fast each cipher is.
562	<	*        However, blowfish is fast and secure, and is probably
563	<	*        a good default for most situations.
564	<	*
565	<	* NOTE3: Default if none is set is BF/128
566	<	*
567	<	* The cipher *MUST* be the same in both directions.  If you
568	<	* set a cipher preference, your uplink must set the same cipher,
569	<	* else it will not link.
603	>	* autoconn   - controls whether we autoconnect to this server or not,
604	>	*              dependent on class limits. By default, this is disabled.
605	>	* ssl        - Initiates a TLS/SSL connection.
606		*/
607	<	#       cipher_preference = "BF/168";
607	>	#       flags = autoconn, ssl;
608		};
609
610	<	/*
611	<	* NOTE: Don't add an extra 'name=' entry if you use
576	<	* the connect "name"{} feature
577	<	*/
578	<	connect "ipv6.some.server" {
610	>	connect {
611	>	name = "ipv6.some.server";
612		host = "3ffd:dead:beef::1";
613		send_password = "password";
614		accept_password = "password";
#	Line 591 | Line 624 | connect "ipv6.some.server" {
624
625		/*
626		* cluster {}:  servers that share klines/unkline/xline/unxline/resv/unresv/locops
627	<	* automatically (OLD hyb6 SLAVE_SERVERS)
627	>	* automatically
628		*/
629		cluster {
630		/*
#	Line 609 | Line 642 | cluster {
642
643		/*
644		* type: list of what to share, options are as follows:
645	<	*      kline   - share klines
646	<	*      tkline  - share temporary klines
647	<	*      unkline - share unklines
648	<	*      xline   - share xlines
649	<	*      txline  - share temporary xlines
650	<	*      unxline - share unxlines
651	<	*      resv    - share resvs
652	<	*      tresv   - share temporary resvs
653	<	*      unresv  - share unresvs
654	<	*      locops  - share locops
622	<	*      all     - share all of the above (default)
645	>	*      dline   - share dlines
646	>	*      undline - share undlines
647	>	*      kline   - share klines
648	>	*      unkline - share unklines
649	>	*      xline   - share xlines
650	>	*      unxline - share unxlines
651	>	*      resv    - share resvs
652	>	*      unresv  - share unresvs
653	>	*      locops  - share locops
654	>	*      all     - share all of the above (default)
655		*/
656		type = kline, unkline, locops, xline, resv;
657		};
658
659		/*
660	<	* shared {}: users that are allowed to remote kline (OLD U:)
660	>	* shared {}: users that are allowed to remote kline
661		*
662		* NOTE: This can be effectively used for remote klines.
663		*       Please note that there is no password authentication
664	<	*       for users setting remote klines.  You must also be
664	>	*       for users setting remote klines. You must also be
665		*       /oper'd in order to issue a remote kline.
666		*/
667		shared {
668		/*
669	<	* name: the server the user must be on to set klines.  If this is not
669	>	* name: the server the user must be on to set klines. If this is not
670		* specified, the user will be allowed to kline from all servers.
671		*/
672		name = "irc2.some.server";
673
674		/*
675	<	* user: the user@host mask that is allowed to set klines.  If this is
675	>	* user: the user@host mask that is allowed to set klines. If this is
676		* not specified, all users on the server above will be allowed to set
677		* a remote kline.
678		*/
#	Line 648 | Line 680 | shared {
680
681		/*
682		* type: list of what to share, options are as follows:
683	<	*      kline   - allow oper/server to kline
684	<	*      tkline  - allow temporary klines
685	<	*      unkline - allow oper/server to unkline
686	<	*      xline   - allow oper/server to xline
687	<	*      txline  - allow temporary xlines
688	<	*      unxline - allow oper/server to unxline
689	<	*      resv    - allow oper/server to resv
690	<	*      tresv   - allow temporary resvs
659	<	*      unresv  - allow oper/server to unresv
683	>	*      dline   - allow oper/server to dline
684	>	*      undline - allow oper/server to undline
685	>	*      kline   - allow oper/server to kline
686	>	*      unkline - allow oper/server to unkline
687	>	*      xline   - allow oper/server to xline
688	>	*      unxline - allow oper/server to unxline
689	>	*      resv    - allow oper/server to resv
690	>	*      unresv  - allow oper/server to unresv
691		*      locops  - allow oper/server to locops - only used for servers that cluster
692	<	*      all     - allow oper/server to do all of the above (default)
692	>	*      all     - allow oper/server to do all of the above (default)
693		*/
694		type = kline, unkline, resv;
695		};
696
697		/*
698	<	* kill {}:  users that are not allowed to connect (OLD K:)
698	>	* kill {}:  users that are not allowed to connect
699		* Oper issued klines will be added to the specified kline config
700		*/
701		kill {
#	Line 672 | Line 703 | kill {
703		reason = "Obviously hacked account";
704		};
705
675	–	kill {
676	–	user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
677	–
678	–	/*
679	–	* NOTE: You have to set type=regex; when using a regular expression
680	–	* based user entry
681	–	*/
682	–	type = regex;
683	–	};
684	–
706		/*
707		* deny {}:  IPs that are not allowed to connect (before DNS/ident lookup)
708		* Oper issued dlines will be added to the specified dline config
#	Line 692 | Line 713 | deny {
713		};
714
715		/*
716	<	* exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:)
716	>	* exempt {}:  IPs that are exempt from deny {} and Dlines
717		*/
718		exempt {
719		ip = "192.168.0.0/16";
720		};
721
722		/*
723	<	* resv {}:  nicks and channels users may not use/join (OLD Q:)
723	>	* resv {}:  nicks and channels users may not use/join
724		*/
725	<	resv {
726	<	/* reason: the reason for the proceeding resv's */
727	<	reason = "Reserved for services";
725	>	resv { mask = "clone*"; reason = "Clone bots"; };
726	>	resv { mask = "ChanServ"; reason = "Reserved for services"; };
727	>	resv { mask = "NickServ"; reason = "Reserved for services"; };
728	>	resv { mask = "OperServ"; reason = "Reserved for services"; };
729	>	resv { mask = "MemoServ"; reason = "Reserved for services"; };
730	>	resv { mask = "BotServ"; reason = "Reserved for services"; };
731	>	resv { mask = "HelpServ"; reason = "Reserved for services"; };
732	>	resv { mask = "HostServ"; reason = "Reserved for services"; };
733	>	resv { mask = "StatServ"; reason = "Reserved for services"; };
734	>	resv { mask = "#*services*"; reason = "Reserved for services"; };
735
736	<	/* resv: the nicks and channels users may not join/use */
737	<	nick = "NickServ";
738	<	nick = "ChanServ";
739	<	nick = "MemoServ";
740	<	nick = "OperServ";
741	<	channel = "#services";
736	>	resv {
737	>	/*
738	>	* mask: masks starting with a '#' are automatically considered
739	>	* as channel name mask.
740	>	*/
741	>	mask = "#helsinki";
742	>	reason = "Channel is reserved for finnish inhabitants";
743
744	<	/* resv: wildcard masks are also supported in nicks only */
745	<	reason = "Clone bots";
746	<	nick = "clone*";
744	>	/*
745	>	* exempt: can be either a ISO 3166 alpha-2 two letter country
746	>	* code, or a nick!user@host mask. CIDR is supported. Exempt
747	>	* entries can be stacked.
748	>	*/
749	>	exempt = "FI";
750		};
751
752		/*
753	<	* gecos {}:  The X: replacement, used for banning users based on
722	<	* their "realname".
753	>	* gecos {}:  Used for banning users based on their "realname".
754		*/
755		gecos {
756		name = "*sex*";
#	Line 731 | Line 762 | gecos {
762		reason = "Trojan drone";
763		};
764
734	–	gecos {
735	–	name = "*http*";
736	–	reason = "Spambot";
737	–	};
738	–
739	–	gecos {
740	–	name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
741	–
742	–	/*
743	–	* NOTE: You have to set type=regex; when using a regular expression
744	–	* based name entry
745	–	*/
746	–	type = regex;
747	–	};
748	–
765		/*
766		* channel {}:  The channel block contains options pertaining to channels
767		*/
#	Line 759 | Line 775 | channel {
775		*   3 | mirc color
776		*  15 | plain text
777		*  22 | reverse
778	+	*  29 | italic
779		*  31 | underline
780		* 160 | non-breaking space
781		*/
782		disable_fake_channels = yes;
783
784		/*
768	–	* restrict_channels: reverse channel RESVs logic, only reserved
769	–	* channels are allowed
770	–	*/
771	–	restrict_channels = no;
772	–
773	–	/*
774	–	* disable_local_channels: prevent users from joining &channels.
775	–	*/
776	–	disable_local_channels = no;
777	–
778	–	/*
779	–	* use_invex: Enable/disable channel mode +I, a n!u@h list of masks
780	–	* that can join a +i channel without an invite.
781	–	*/
782	–	use_invex = yes;
783	–
784	–	/*
785	–	* use_except: Enable/disable channel mode +e, a n!u@h list of masks
786	–	* that can join a channel through a ban (+b).
787	–	*/
788	–	use_except = yes;
789	–
790	–	/*
791	–	* use_knock: Allows users to request an invite to a channel that
792	–	* is locked somehow (+ikl).  If the channel is +p or you are banned
793	–	* the knock will not be sent.
794	–	*/
795	–	use_knock = yes;
796	–
797	–	/*
785		* knock_delay: The amount of time a user must wait between issuing
786		* the knock command.
787		*/
#	Line 807 | Line 794 | channel {
794		knock_delay_channel = 1 minute;
795
796		/*
810	–	* burst_topicwho: enable sending of who set topic on topicburst
811	–	* default is yes
812	–	*/
813	–	burst_topicwho = yes;
814	–
815	–	/*
797		* max_chans_per_user: The maximum number of channels a user can
798		* join/be on.
799		*/
800		max_chans_per_user = 25;
801
802	<	/* quiet_on_ban: stop banned people talking in channels. */
803	<	quiet_on_ban = yes;
802	>	/*
803	>	* max_chans_per_oper: The maximum number of channels an oper can
804	>	* join/be on.
805	>	*/
806	>	max_chans_per_oper = 50;
807
808		/* max_bans: maximum number of +b/e/I modes in a channel */
809	<	max_bans = 25;
809	>	max_bans = 100;
810
811		/*
812		* how many joins in how many seconds constitute a flood, use 0 to
#	Line 842 | Line 826 | channel {
826
827		/*
828		* default_split_user_count: when the usercount is lower than this level,
829	<	* consider ourselves split.  This must be set for automatic splitmode.
829	>	* consider ourselves split. This must be set for automatic splitmode.
830		*/
831		default_split_user_count = 0;
832
833		/*
834		* default_split_server_count: when the servercount is lower than this,
835	<	* consider ourselves split.  This must be set for automatic splitmode.
835	>	* consider ourselves split. This must be set for automatic splitmode.
836		*/
837		default_split_server_count = 0;
838
#	Line 865 | Line 849 | channel {
849		*/
850		serverhide {
851		/*
852	+	* disable_remote_commands: disable users doing commands
853	+	* on remote servers.
854	+	*/
855	+	disable_remote_commands = no;
856	+
857	+	/*
858		* flatten_links: this option will show all servers in /links appear
859	<	* that they are linked to this current server
859	>	* that they are linked to this current server.
860		*/
861		flatten_links = no;
862
#	Line 878 | Line 868 | serverhide {
868
869		/*
870		* hidden: hide this server from a /links output on servers that
871	<	* support it.  This allows hub servers to be hidden etc.
871	>	* support it. This allows hub servers to be hidden etc.
872		*/
873		hidden = no;
874
875		/*
886	–	* disable_hidden: prevent servers hiding themselves from a
887	–	* /links output.
888	–	*/
889	–	disable_hidden = no;
890	–
891	–	/*
876		* hide_servers: hide remote servernames everywhere and instead use
877		* hidden_name and network_desc.
878		*/
879		hide_servers = no;
880
881		/*
882	+	* hide_services: define this if you want to hide the location of
883	+	* services servers that are specified in the service{} block.
884	+	*/
885	+	hide_services = no;
886	+
887	+	/*
888		* Use this as the servername users see if hide_servers = yes.
889		*/
890		hidden_name = "*.hidden.com";
#	Line 909 | Line 899 | serverhide {
899		* logfiles.
900		*
901		* We recommend you leave this disabled, and just take care with who you
902	<	* give admin=yes; to.
902	>	* give administrator privileges to.
903		*/
904		hide_server_ips = no;
905		};
906
907		/*
908		* general {}:  The general block contains many of the options that were once
909	<	* compiled in options in config.h.  The general block is read at start time.
909	>	* compiled in options in config.h
910		*/
911		general {
912		/* services_name: servername of nick/channel services */
#	Line 925 | Line 915 | general {
915		/* max_watch: maximum WATCH entries a client can have. */
916		max_watch = 60;
917
918	+	/* gline_enable: enable glines, network wide temp klines. */
919	+	gline_enable = yes;
920	+
921		/*
922	<	* gline_min_cidr: the minimum required length of a CIDR bitmask
923	<	* for IPv4 based glines
922	>	* gline_duration: the amount of time a gline will remain on your
923	>	* server before expiring.
924		*/
925	<	gline_min_cidr = 16;
925	>	gline_duration = 1 day;
926
927		/*
928	<	* gline_min_cidr6: the minimum required length of a CIDR bitmask
929	<	* for IPv6 based glines
928	>	* gline_request_duration: how long a pending G-line can be around.
929	>	* 10 minutes should be plenty.
930		*/
931	<	gline_min_cidr6 = 48;
931	>	gline_request_duration = 10 minutes;
932
933		/*
934	<	* Whether to automatically set mode +i on connecting users.
934	>	* gline_min_cidr: the minimum required length of a CIDR bitmask
935	>	* for IPv4 based glines.
936		*/
937	<	invisible_on_connect = yes;
937	>	gline_min_cidr = 16;
938
939		/*
940	<	* If you don't explicitly specify burst_away in your connect blocks, then
941	<	* they will default to the burst_away value below.
940	>	* gline_min_cidr6: the minimum required length of a CIDR bitmask
941	>	* for IPv6 based glines.
942		*/
943	<	burst_away = no;
943	>	gline_min_cidr6 = 48;
944
945		/*
946	<	* Show "actually using host <ip>" on /whois when possible.
946	>	* Whether to automatically set mode +i on connecting users.
947		*/
948	<	use_whois_actually = yes;
948	>	invisible_on_connect = yes;
949
950		/*
951	<	* Max time from the nickname change that still causes KILL
952	<	* automatically to switch for the current nick of that user.
951	>	* kill_chase_time_limit: maximum time from the nickname change that
952	>	* still causes KILL automatically to switch for the current nick of
953	>	* that user.
954		*/
955		kill_chase_time_limit = 90 seconds;
956
957		/*
958	<	* If hide_spoof_ips is disabled, opers will be allowed to see the real IP of spoofed
959	<	* users in /trace etc.  If this is defined they will be shown a masked IP.
958	>	* hide_spoof_ips: if disabled, opers will be allowed to see the real
959	>	* IP of spoofed users in /trace etc. If this is defined they will be
960	>	* shown a masked IP.
961		*/
962		hide_spoof_ips = yes;
963
964		/*
965	<	* Ignore bogus timestamps from other servers.  Yes, this will desync
966	<	* the network, but it will allow chanops to resync with a valid non TS 0
965	>	* Ignore bogus timestamps from other servers. Yes, this will desync the
966	>	* network, but it will allow chanops to resync with a valid non TS 0
967		*
968		* This should be enabled network wide, or not at all.
969		*/
#	Line 979 | Line 975 | general {
975		*/
976		disable_auth = no;
977
982	–	/* disable_remote_commands: disable users doing commands on remote servers */
983	–	disable_remote_commands = no;
984	–
978		/*
979		* tkline_expire_notices: enables or disables temporary kline/xline
980		* expire notices.
#	Line 990 | Line 983 | general {
983
984		/*
985		* default_floodcount: the default value of floodcount that is configurable
986	<	* via /quote set floodcount.  This is the amount of lines a user
986	>	* via /quote set floodcount. This is the amount of lines a user
987		* may send to any other user/channel in one second.
988		*/
989		default_floodcount = 10;
#	Line 1009 | Line 1002 | general {
1002
1003		/*
1004		* min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1005	<	* placed via the server.  klines hand placed are exempt from limits.
1006	<	* wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1005	>	* placed via the server. K-lines hand placed are exempt from limits.
1006	>	* Wildcard chars: '.', ':', '*', '?', '@', '!'
1007		*/
1008		min_nonwildcard = 4;
1009
1010		/*
1011		* min_nonwildcard_simple: the minimum non wildcard characters in
1012	<	* gecos bans.  wildcard chars: '*' '?' '#'
1012	>	* gecos bans. Wildcard chars: '*', '?'
1013		*/
1014		min_nonwildcard_simple = 3;
1015
1016	<	/* max_accept: maximum allowed /accept's for +g usermode */
1016	>	/* max_accept: maximum allowed /accept's for +g usermode. */
1017		max_accept = 20;
1018
1019	<	/* anti_nick_flood: enable the nickflood control code */
1019	>	/* anti_nick_flood: enable the nickflood control code. */
1020		anti_nick_flood = yes;
1021
1022		/* nick flood: the nick changes allowed in the specified period */
#	Line 1038 | Line 1031 | general {
1031
1032		/*
1033		* ts delta: the time delta allowed between server clocks before
1034	<	* a warning is given, or before the link is dropped.  all servers
1034	>	* a warning is given, or before the link is dropped. All servers
1035		* should run ntpdate/rdate to keep clocks in sync
1036		*/
1037		ts_warn_delta = 30 seconds;
1038		ts_max_delta = 5 minutes;
1039
1040		/*
1048	–	* kline_with_reason: show the user the reason why they are k/d/glined
1049	–	* on exit.  May give away who set k/dline when set via tcm.
1050	–	*/
1051	–	kline_with_reason = yes;
1052	–
1053	–	/*
1054	–	* kline_reason: show this message to users on channel
1055	–	* instead of the oper reason.
1056	–	*/
1057	–	kline_reason = "Connection closed";
1058	–
1059	–	/*
1060	–	* reject_hold_time: wait this amount of time before disconnecting
1061	–	* a rejected client. Use 0 to disable.
1062	–	*/
1063	–	reject_hold_time = 0;
1064	–
1065	–	/*
1041		* warn_no_nline: warn opers about servers that try to connect but
1042	<	* we don't have a connect {} block for.  Twits with misconfigured
1042	>	* we don't have a connect {} block for. Twits with misconfigured
1043		* servers can get really annoying with this enabled.
1044		*/
1045		warn_no_nline = yes;
1046
1047		/*
1048		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1049	<	* operators and administrators.  Doing so is a good idea in case
1049	>	* operators and administrators. Doing so is a good idea in case
1050		* there are any exempted (exempt{}) server IPs you don't want to
1051		* see leaked.
1052		*/
#	Line 1084 | Line 1059 | general {
1059		stats_P_oper_only = yes;
1060
1061		/*
1062	<	* stats i oper only: make stats i (auth {}) oper only. set to:
1063	<	*     yes:    show users no auth blocks, made oper only.
1064	<	*     masked: show users first matching auth block
1065	<	*     no:     show users all auth blocks.
1062	>	* stats i oper only: make stats i (auth {}) oper only. Set to:
1063	>	*     yes    - show users no auth blocks, made oper only.
1064	>	*     masked - show users first matching auth block
1065	>	*     no     - show users all auth blocks.
1066		*/
1067		stats_i_oper_only = yes;
1068
1069		/*
1070	<	* stats_k_oper_only: make stats k/K (klines) oper only.  set to:
1071	<	*     yes:    show users no auth blocks, made oper only
1072	<	*     masked: show users first matching auth block
1073	<	*     no:     show users all auth blocks.
1070	>	* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1071	>	*     yes    - show users no auth blocks, made oper only
1072	>	*     masked - show users first matching auth block
1073	>	*     no     - show users all auth blocks.
1074		*/
1075		stats_k_oper_only = yes;
1076
#	Line 1119 | Line 1094 | general {
1094
1095		/*
1096		* pace_wait: time between more intensive commands
1097	<	* (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1097	>	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1098		*/
1099		pace_wait = 10 seconds;
1100
#	Line 1140 | Line 1115 | general {
1115
1116		/*
1117		* true_no_oper_flood: completely eliminate flood limits for opers
1118	<	* and for clients with can_flood = yes in their auth {} blocks
1118	>	* and for clients with can_flood = yes in their auth {} blocks.
1119		*/
1120		true_no_oper_flood = yes;
1121
1122	<	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1122	>	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1123		oper_pass_resv = yes;
1124
1150	–	/*
1151	–	* idletime: the maximum amount of time a user may idle before
1152	–	* they are disconnected
1153	–	*/
1154	–	idletime = 0;
1155	–
1125		/* REMOVE ME.  The following line checks you've been reading. */
1126		havent_read_conf = 1;
1127
1128		/*
1129		* max_targets: the maximum amount of targets in a single
1130	<	* PRIVMSG/NOTICE.  Set to 999 NOT 0 for unlimited.
1130	>	* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1131		*/
1132		max_targets = 4;
1133
1134		/*
1166	–	* client_flood: maximum amount of data in a clients queue before
1167	–	* they are dropped for flooding.
1168	–	*/
1169	–	client_flood = 2560 bytes;
1170	–
1171	–	/*
1172	–	* message_locale: the default message locale
1173	–	* Use "standard" for the compiled in defaults.
1174	–	* To install the translated messages, go into messages/ in the
1175	–	* source directory and run `make install'.
1176	–	*/
1177	–	message_locale = "standard";
1178	–
1179	–	/*
1135		* usermodes configurable: a list of usermodes for the options below
1136		*
1137		* +b - bots         - See bot and drone flooding notices
1138		* +c - cconn        - Client connection/quit notices
1184	–	* +C - cconn_full   - Client connection/quit notices full
1139		* +D - deaf         - Don't receive channel messages
1140		* +d - debug        - See debugging notices
1141	<	* +f - full         - See I: line full notices
1141	>	* +e - external     - See remote server connection and split notices
1142	>	* +F - farconnect   - Remote client connection/quit notices
1143	>	* +f - full         - See auth{} block full notices
1144		* +G - softcallerid - Server Side Ignore for users not on your channels
1145		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1146	+	* +H - hidden       - Hides operator status to other users
1147		* +i - invisible    - Not shown in NAMES or WHO unless you share a
1148		*                     a channel
1149	+	* +j - rej          - See rejected client notices
1150		* +k - skill        - See server generated KILL messages
1151		* +l - locops       - See LOCOPS messages
1152		* +n - nchange      - See client nick changes
1153	<	* +r - rej          - See rejected client notices
1153	>	* +R - nononreg     - Only receive private messages from registered clients
1154		* +s - servnotice   - See general server notices
1155		* +u - unauth       - See unauthorized client notices
1156		* +w - wallop       - See server generated WALLOPS
1199	–	* +x - external     - See remote server connection and split notices
1157		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1158		* +z - operwall     - See oper generated WALLOPS
1159		*/
1160
1161		/* oper_only_umodes: usermodes only opers may set */
1162	<	oper_only_umodes = bots, cconn, cconn_full, debug, full, skill,
1162	>	oper_only_umodes = bots, cconn, debug, full, hidden, skill,
1163		nchange, rej, spy, external, operwall,
1164	<	locops, unauth;
1164	>	locops, unauth, farconnect;
1165
1166		/* oper_umodes: default usermodes opers get when they /oper */
1167		oper_umodes = bots, locops, servnotice, operwall, wallop;
1168
1169		/*
1213	–	* servlink_path: path to 'servlink' program used by ircd to handle
1214	–	* encrypted/compressed server <-> server links.
1215	–	*
1216	–	* only define if servlink is not in same directory as ircd itself.
1217	–	*/
1218	–	#servlink_path = "/usr/local/ircd/bin/servlink";
1219	–
1220	–	/*
1221	–	* default_cipher_preference: default cipher to use for cryptlink when none is
1222	–	* specified in connect block.
1223	–	*/
1224	–	#default_cipher_preference = "BF/168";
1225	–
1226	–	/*
1170		* use_egd: if your system does not have *random devices yet you
1171	<	* want to use OpenSSL and encrypted links, enable this.  Beware -
1172	<	* EGD is *very* CPU intensive when gathering data for its pool
1171	>	* want to use OpenSSL and encrypted links, enable this. Beware -
1172	>	* EGD is *very* CPU intensive when gathering data for its pool.
1173		*/
1174		#       use_egd = yes;
1175
#	Line 1236 | Line 1179 | general {
1179		*/
1180		#       egdpool_path = "/var/run/egd-pool";
1181
1239	–
1240	–	/*
1241	–	* compression_level: level of compression for compressed links between
1242	–	* servers.
1243	–	*
1244	–	* values are between: 1 (least compression, fastest)
1245	–	*                and: 9 (most compression, slowest).
1246	–	*/
1247	–	#       compression_level = 6;
1248	–
1182		/*
1183		* throttle_time: the minimum amount of time between connections from
1184	<	* the same ip.  exempt {} blocks are excluded from this throttling.
1185	<	* Offers protection against flooders who reconnect quickly.
1184	>	* the same ip. exempt {} blocks are excluded from this throttling.
1185	>	* Offers protection against flooders who reconnect quickly.
1186		* Set to 0 to disable.
1187		*/
1188		throttle_time = 10;
1189		};
1190
1258	–	glines {
1259	–	/* enable: enable glines, network wide temp klines */
1260	–	enable = yes;
1261	–
1262	–	/*
1263	–	* duration: the amount of time a gline will remain on your
1264	–	* server before expiring
1265	–	*/
1266	–	duration = 1 day;
1267	–
1268	–	/*
1269	–	* logging: which types of rules you want to log when triggered
1270	–	* (choose reject or block)
1271	–	*/
1272	–	logging = reject, block;
1273	–
1274	–	/*
1275	–	* NOTE: gline ACLs can cause a desync of glines throughout the
1276	–	* network, meaning some servers may have a gline triggered, and
1277	–	* others may not. Also, you only need insert rules for glines
1278	–	* that you want to block and/or reject. If you want to accept and
1279	–	* propagate the gline, do NOT put a rule for it.
1280	–	*/
1281	–
1282	–	/* user@host for rule to apply to */
1283	–	user = "god@I.still.hate.packets";
1284	–	/* server for rule to apply to */
1285	–	name = "hades.arpa";
1286	–
1287	–	/*
1288	–	* action: action to take when a matching gline is found. options are:
1289	–	*  reject      - do not apply the gline locally
1290	–	*  block       - do not propagate the gline
1291	–	*/
1292	–	action = reject, block;
1293	–
1294	–	user = "god@*";
1295	–	name = "*";
1296	–	action = block;
1297	–	};
1298	–
1191		modules {
1192		/*
1193		* path: other paths to search for modules specified below
1194	<	* and in /modload.
1194	>	* and in "/module load".
1195		*/
1196		path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1197		path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1198
1199	<	/* module: the name of a module to load on startup/rehash */
1200	<	#module = "some_module.la";
1199	>	/* module: the name of a module to load on startup/rehash. */
1200	>	#       module = "some_module.la";
1201	>	};
1202	>
1203	>	/*
1204	>	* log {}:  contains information about logfiles.
1205	>	*/
1206	>	log {
1207	>	/* Do you want to enable logging to ircd.log? */
1208	>	use_logging = yes;
1209	>
1210	>	file {
1211	>	type = oper;
1212	>	name = "/usr/local/ircd/var/log/oper.log";
1213	>	size = unlimited;
1214	>	};
1215	>
1216	>	file {
1217	>	type = user;
1218	>	name = "/usr/local/ircd/var/log/user.log";
1219	>	size = 50 megabytes;
1220	>	};
1221	>
1222	>	file {
1223	>	type = kill;
1224	>	name = "/usr/local/ircd/var/log/kill.log";
1225	>	size = 50 megabytes;
1226	>	};
1227	>
1228	>	file {
1229	>	type = kline;
1230	>	name = "/usr/local/ircd/var/log/kline.log";
1231	>	size = 50 megabytes;
1232	>	};
1233	>
1234	>	file {
1235	>	type = dline;
1236	>	name = "/usr/local/ircd/var/log/dline.log";
1237	>	size = 50 megabytes;
1238	>	};
1239	>
1240	>	file {
1241	>	type = gline;
1242	>	name = "/usr/local/ircd/var/log/gline.log";
1243	>	size = 50 megabytes;
1244	>	};
1245	>
1246	>	file {
1247	>	type = debug;
1248	>	name = "/usr/local/ircd/var/log/debug.log";
1249	>	size = 50 megabytes;
1250	>	};
1251		};

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)