ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/doc/reference.conf

Comparing ircd-hybrid/trunk/doc/reference.conf (file contents):
Revision 2196 by michael, Tue Jun 4 18:30:12 2013 UTC vs.
Revision 4786 by michael, Sat Oct 25 16:56:03 2014 UTC

#	Line 1 | Line 1
1	<	/* ircd-hybrid reference configuration file
2	<	* Copyright (C) 2000-2013 Hybrid Development Team
1	>	/*
2	>	* This is an example configuration file for ircd-hybrid
3		*
4	<	* Written by ejb, wcampbel, db, leeh and others
4	>	* Copyright (c) 2000-2014 ircd-hybrid development team
5		*
6		* $Id$
7		*/
8
9		/*
10		* ########################################################################
11	<	* IMPORTANT NOTES:
11	>	* IMPORTANT NOTE:
12		*
13	<	* auth {} blocks MUST be specified in order of precedence.  The first one
14	<	* that matches a user will be used.  So place spoofs first, then specials,
13	>	* auth {} blocks MUST be specified in order of precedence. The first one
14	>	* that matches a user will be used. So place spoofs first, then specials,
15		* then general access.
16		* ########################################################################
17		*
#	Line 23 | Line 23
23		*
24		* Times/durations are written as:
25		*        12 hours 30 minutes 1 second
26	<	*
26	>	*
27		* Valid units of time:
28		*        year, month, week, day, hour, minute, second
29		*
30		* Valid units of size:
31		*        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
32		*
33	<	* Sizes and times may be singular or plural.
34	<	*/
33	>	* Sizes and times may be singular or plural.
34	>	*/
35
36
37		/*
#	Line 39 | Line 39
39		*/
40		serverinfo {
41		/*
42	<	* name: the name of this server.  This cannot be changed at runtime.
42	>	* name: the name of this server. This cannot be changed at runtime.
43		*/
44		name = "hades.arpa";
45
46		/*
47	<	* sid: a server's unique ID.  This is three characters long and must
48	<	* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
47	>	* sid: a server's unique ID. This is three characters long and must
48	>	* be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	+	*
51		* NOTE: The letters must be capitalized. This cannot be changed at runtime.
52		*/
53		sid = "0HY";
#	Line 76 | Line 77 | serverinfo {
77		#       vhost = "192.169.0.1";
78
79		/*
80	<	* vhost6: the IP to bind to when we connect outward to ipv6 servers.
81	<	* This should be an ipv6 IP only, or "*" for INADDR_ANY.
80	>	* vhost6: the address to bind to when we make outgoing connections
81	>	* to IPv6 servers. This should be an IPv6 address, or "*" for INADDR_ANY.
82		*/
83		#       vhost6 = "3ffe:80e8:546::2";
84
#	Line 98 | Line 99 | serverinfo {
99		max_topic_length = 160;
100
101		/*
102	<	* rsa_private_key_file: the path to the file containing our
103	<	* rsa key for cryptlink.
102	>	* rsa_private_key_file: the path to the file containing the
103	>	* RSA key.
104	>	*
105	>	* Example commands to store a 2048 bit RSA key in rsa.key:
106		*
104	–	* Example command to store a 2048 bit RSA keypair in
105	–	* rsa.key, and the public key in rsa.pub:
106	–	*
107		*      openssl genrsa -out rsa.key 2048
108	<	*      openssl rsa -in rsa.key -pubout -out rsa.pub
109	<	*      chown <ircd-user>.<ircd.group> rsa.key rsa.pub
108	>	*      chown <ircd-user>.<ircd.group> rsa.key
109		*      chmod 0600 rsa.key
111	–	*      chmod 0644 rsa.pub
110		*/
111	<	#       rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
111	>	#       rsa_private_key_file = "etc/rsa.key";
112
113		/*
114		* ssl_certificate_file: the path to the file containing our
115	<	* ssl certificate for encrypted client connection.
115	>	* SSL certificate for encrypted client connection.
116		*
117		* This assumes your private RSA key is stored in rsa.key. You
118		* MUST have an RSA key in order to generate the certificate.
#	Line 132 | Line 130 | serverinfo {
130		*      Common Name: irc.someirc.net
131		*      E-mail: you@domain.com
132		*/
133	<	#       ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
133	>	#       ssl_certificate_file = "etc/cert.pem";
134
135		/*
136	<	* ssl_dh_param_file:
137	<	*
138	<	* Path to the PEM encoded Diffie-Hellman parameter file.
141	<	* DH parameters are strictly required when using ciphers
142	<	* with EDH (ephemeral Diffie-Hellman) key exchange.
136	>	* ssl_dh_param_file: path to the PEM encoded Diffie-Hellman
137	>	* parameter file. DH parameters are required when using
138	>	* ciphers with EDH (ephemeral Diffie-Hellman) key exchange.
139		*
140		* A DH parameter file can be created by running:
141		*
142	<	*      openssl dhparam -out dhparam.pem 1024
142	>	*      openssl dhparam -out dhparam.pem 2048
143		*
144		* Prime size must be at least 1024 bits. Further information
145		* regarding specific OpenSSL dhparam command-line options
146		* can be found in the OpenSSL manual.
147		*/
148	<	#       ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
148	>	#       ssl_dh_param_file = "etc/dhparam.pem";
149
150		/*
151	<	* ssl_cipher_list:
151	>	* ssl_dh_elliptic_curve: defines the curve to use for the
152	>	* Elliptic Curve Diffie-Hellman (ECDH) algorithm.
153	>	* Default is ANSI X9.62 prime256v1/secp256r1 if nothing else is specified.
154	>	*
155	>	* A list of supported curves by OpenSSL can be obtained by running:
156		*
157	<	* List of ciphers that are supported by _this_ server. Can be used to
158	<	* enforce specific ciphers for incoming SSL/TLS connections.
159	<	* If a client (which also includes incoming server connections) isn't
160	<	* capable of any cipher listed below, the connection will simply be
161	<	* rejected.
157	>	*      openssl ecparam -list_curves
158	>	*/
159	>	#       ssl_dh_elliptic_curve = "secp521r1";
160	>
161	>	/*
162	>	* ssl_cipher_list: list of ciphers to support on _this_ server.
163	>	* Can be used to enforce specific ciphers for incoming SSL/TLS
164	>	* connections. If a client (which also includes incoming server connections)
165	>	* is not capable of using any of the ciphers listed here, the connection will
166	>	* simply be rejected.
167		*
168	<	* A list of supported ciphers can be obtained by running:
168	>	* A list of supported ciphers by OpenSSL can be obtained by running:
169		*
170		*      openssl ciphers -ssl3 -tls1 -v
171		*
172		* Multiple ciphers are separated by colons. The order of preference is
173		* from left to right.
174		*/
175	<	#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
175	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
176
177		/*
178	<	* ssl_server_method:
179	<	* ssl_client_method:
178	>	* ssl_message_digest_algorithm: defines what cryptographic hash function
179	>	* to use for generating fingerprint hashes of X.509 certificates.
180	>	* Default is SHA-256 if nothing else is specified.
181	>	*
182	>	* A list of supported message digest algorithms by OpenSSL can be obtained by running:
183		*
184	<	* SSL/TLS methods we provide for incoming (server method) and
177	<	* outgoing (client method) SSL/TLS connections.
178	<	* This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
184	>	*      openssl list-message-digest-algorithms
185		*/
186	<	#       ssl_server_method = tlsv1, sslv3;
181	<	#       ssl_client_method = tlsv1;
186	>	#       ssl_message_digest_algorithm = "sha256";
187		};
188
189		/*
190	<	* admin {}:  contains admin information about the server
190	>	* admin {}:  contains administrative information about the server
191		*/
192		admin {
193		name = "Smurf target";
#	Line 205 | Line 210 | class {
210
211		/*
212		* number_per_ip: how many local users are allowed to connect
213	<	* from one IP  (optional)
213	>	* from a single IP address (optional)
214		*/
215		number_per_ip = 2;
216
217		/*
218		* max_local: how many local users are allowed to connect
219	<	* from one ident@host  (optional)
219	>	* from a single ident@host (optional)
220		*/
221		max_local = 2;
222
223		/*
224	<	* max_global: network-wide limit of users per ident@host  (optional)
224	>	* max_global: network-wide limit of users per ident@host (optional)
225		*/
226		max_global = 10;
227
#	Line 226 | Line 231 | class {
231		max_number = 100;
232
233		/*
234	<	* the following lines are optional and allow you to define
234	>	* The following lines are optional and allow you to define
235		* how many users can connect from one /NN subnet.
236		*/
237		cidr_bitlen_ipv4 = 24;
#	Line 234 | Line 239 | class {
239		number_per_cidr = 16;
240
241		/*
242	<	* sendq: the amount of data allowed in a clients send queue before
242	>	* sendq: the amount of data allowed in a client's send queue before
243		* they are dropped.
244		*/
245		sendq = 100 kbytes;
246
247		/*
248	<	* recvq: maximum amount of data in a clients receive queue before
249	<	* they are dropped for flooding. Defaults to 2560 if the chosen
250	<	* value isn't within the range of 512 to 8000.
248	>	* recvq: the amount of data allowed in a client's receive queue before
249	>	* they are dropped for flooding. Defaults to 2560 if the chosen value
250	>	* isn't within the range of 512 to 8000.
251		*/
252		recvq = 2560 bytes;
253		};
#	Line 255 | Line 260 | class {
260		sendq = 100 kbytes;
261
262		/*
263	+	* max_channels: maximum number of channels users in this class can join.
264	+	*/
265	+	max_channels = 60;
266	+
267	+	/*
268		* min_idle: minimum idle time that is shown in /whois.
269		*/
270		min_idle = 3 hours;
#	Line 267 | Line 277 | class {
277		/*
278		* flags:
279		*
280	<	* random_idle          - idle time is randomly selected within the
281	<	*                        range of min_idle to max_idle
282	<	* hide_idle_from_opers - fake idle time will be shown to operators, too
280	>	* random_idle          - a fake idle time is set randomly between
281	>	*                        min_idle and max_idle
282	>	* hide_idle_from_opers - the fake idle time will also be shown to operators
283		*/
284		flags = random_idle, hide_idle_from_opers;
285		};
#	Line 284 | Line 294 | class {
294		*/
295		connectfreq = 5 minutes;
296
297	<	/* max number: the amount of servers to autoconnect to. */
297	>	/* max number: the number of servers to autoconnect to. */
298		max_number = 1;
299
300		/* sendq: servers need a higher sendq as they send more data. */
#	Line 292 | Line 302 | class {
302		};
303
304		/*
305	<	* motd {}: specifies various MOTD files. Applies to local users only.
305	>	* motd {}: Allows the display of a different MOTD to a client
306	>	* depending on its origin. Applies to local users only.
307		*/
308		motd {
309		/*
310		* mask: multiple mask entries are permitted. Mask can either be
311	<	* a class name or a hostname.
311	>	* a class name or a hostname. CIDR is supported.
312		*/
313		mask = "*.at";
314		mask = "*.de";
#	Line 306 | Line 317 | motd {
317		/*
318		* file: path to the actual motd file.
319		*/
320	<	file = "/usr/local/ircd/etc/german.motd";
320	>	file = "etc/german.motd";
321		};
322
323		/*
#	Line 314 | Line 325 | motd {
325		*/
326		listen {
327		/*
328	<	* port: the specific port to listen on. If no host is specified
329	<	* before, it will listen on all available IPs.
328	>	* port: the port to listen on. If no host is specified earlier
329	>	* in the listen {} block, it will listen on all available IPs.
330		*
331	<	* Ports are separated via a comma, a range may be specified using ".."
331	>	* Ports are separated by commas; a range may be specified using ".."
332		*/
333	<
334	<	/* port: listen on all available IPs, ports 6665 to 6669 */
333	>
334	>	/* port: listen on all available IP addresses, ports 6665 to 6669. */
335		port = 6665 .. 6669;
336
337		/*
338	<	* Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
338	>	* Listen on 192.168.0.1/6697 with SSL enabled and hidden from STATS P
339		* unless you are an administrator.
340		*
341	<	* NOTE: The "flags" directive has to come before "port". Always!
341	>	* NOTE: The "flags" directive always has to come before "port".
342		*
343		* Currently available flags are:
344		*
#	Line 340 | Line 351 | listen {
351		port = 6697;
352
353		/*
354	<	* host: set a specific IP/host the ports after the line will listen
355	<	* on. This may be ipv4 or ipv6.
354	>	* host: set a specific IP address/host to listen on using the
355	>	* subsequent port definitions. This may be IPv4 or IPv6.
356		*/
357		host = "1.2.3.4";
358		port = 7000, 7001;
#	Line 356 | Line 367 | listen {
367		auth {
368		/*
369		* user: the user@host allowed to connect. Multiple user
370	<	* lines are permitted per auth block.
370	>	* lines are permitted within each auth {} block.
371		*/
372		user = "*@172.16.0.0/12";
373		user = "*test@123D:B567:*";
374
375	<	/* password: an optional password that is required to use this block */
375	>	/* password: an optional password that is required to use this block. */
376		password = "letmein";
377
378		/*
#	Line 371 | Line 382 | auth {
382		encrypted = yes;
383
384		/*
385	<	* spoof: fake the users host to this. This is free-form, just do
385	>	* spoof: fake the user's host to this. This is free-form, just do
386		* everyone a favor and don't abuse it. ('=' prefix on /stats I)
387		*/
388		spoof = "I.still.hate.packets";
389
390	<	/* class: the class the user is placed in */
390	>	/* class: the class the user is placed in. */
391		class = "opers";
392
393		/*
394	<	* need_password - don't allow users who haven't supplied the correct
395	<	*                 password to connect using another auth{} block
396	<	*                 ('&' prefix on /stats I if disabled)
386	<	* need_ident    - require the user to have identd to connect ('+' prefix on /stats I)
394	>	* need_password - don't allow users who haven't supplied the correct  | ('&' prefix on /stats I if disabled)
395	>	*                 password to connect using another auth {} block
396	>	* need_ident    - require the user to have identd to connect          | ('+' prefix on /stats I)
397		* spoof_notice  - enable spoofing notification to admins
398	<	* exceed_limit  - allow a user to exceed class limits ('>' prefix on /stats I)
399	<	* kline_exempt  - exempt this user from k/glines ('^' prefix on /stats I)
400	<	* gline_exempt  - exempt this user from glines ('_' prefix on /stats I)
401	<	* resv_exempt   - exempt this user from resvs ('$' prefix on /stats I)
402	<	* no_tilde      - remove ~ from a user with no ident ('-' prefix on /stats I)
403	<	* can_flood     - allow this user to exceed flood limits ('|' prefix on /stats I)
404	<	* webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
405	<	*                 ('<' prefix on /stats I)
398	>	* exceed_limit  - allow a user to exceed class limits                 | ('>' prefix on /stats I)
399	>	* kline_exempt  - exempt this user from k/glines                      | ('^' prefix on /stats I)
400	>	* gline_exempt  - exempt this user from glines                        | ('_' prefix on /stats I)
401	>	* resv_exempt   - exempt this user from resvs                         | ('$' prefix on /stats I)
402	>	* no_tilde      - remove ~ from a user with no ident                  | ('-' prefix on /stats I)
403	>	* can_flood     - allow this user to exceed flood limits              | ('|' prefix on /stats I)
404	>	* webirc        - enables WEBIRC authentication for web-based         | ('<' prefix on /stats I)
405	>	*                 clients such as Mibbit
406		*/
407		flags = need_password, spoof_notice, exceed_limit, kline_exempt,
408		gline_exempt, resv_exempt, no_tilde, can_flood;
#	Line 400 | Line 410 | auth {
410
411		auth {
412		/*
413	<	* redirect: the server and port to redirect a user to. A user does not
414	<	* have to obey the redirection, the ircd just suggests an alternative
415	<	* server for them.
413	>	* redirserv, redirport: the server and port to redirect a user to.
414	>	* A user does not have to obey the redirection; the ircd just
415	>	* suggests an alternative server for them.
416		*/
417	<	redirserv = "this.is.not.a.real.server";
417	>	redirserv = "server.tld";
418		redirport = 6667;
409	–
410	–	user = "*.server";
419
420	<	/* class: a class is required even though it is not used */
420	>	user = "*@*.tld";
421	>
422	>	/* class: a class is required even though it is not used. */
423		class = "users";
424		};
425
#	Line 423 | Line 433 | auth {
433		* operator {}:  defines ircd operators
434		*/
435		operator {
436	<	/* name: the name of the oper */
436	>	/* name: the name of the operator */
437		name = "sheep";
438
439		/*
440	<	* user: the user@host required for this operator. Multiple
441	<	* user="" lines are supported.
440	>	* user: the user@host required for this operator. Multiple user
441	>	* lines are permitted within each operator {} block.
442		*/
443		user = "*sheep@192.168.0.0/16";
444		user = "*@127.0.0.0/8";
#	Line 438 | Line 448 | operator {
448		* need to be encrypted by using the provided mkpasswd tool.
449		* Several password hash algorithms are available depending
450		* on your system's crypt() implementation. For example, a modern
451	<	* glibc already has support for SHA-256/512, and MD5 encryption
451	>	* glibc already has support for the SHA-256/512 and MD5 encryption
452		* algorithms.
453		*/
454		password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
455
456		/*
457		* encrypted: controls whether the oper password above has been
458	<	* encrypted.
458	>	* encrypted. Default is 'yes' if nothing else is specified.
459		*/
460		encrypted = yes;
461
462		/*
463	<	* rsa_public_key_file: the public key for this oper when using Challenge.
464	<	* A password should not be defined when this is used, see
463	>	* rsa_public_key_file: the public key for this oper when using /challenge.
464	>	* A password should not be defined when this is used; see
465		* doc/challenge.txt for more information.
466		*/
467	<	#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
467	>	#       rsa_public_key_file = "etc/oper.pub";
468	>
469	>	/*
470	>	* ssl_certificate_fingerprint: enhances security by additionally checking
471	>	* the oper's client certificate fingerprint against the specified
472	>	* fingerprint below.
473	>	*
474	>	* Hint: your users can use the following command to obtain a SHA-256 hash
475	>	* of their ssl certificate:
476	>	*
477	>	*      openssl x509 -sha256 -noout -fingerprint -in cert.pem | sed -e 's/^.*=//;s/://g'
478	>	*/
479	>	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
480	>
481	>	/*
482	>	* ssl_connection_required: client must be connected over SSL/TLS
483	>	* in order to be able to use this operator {} block.
484	>	* Default is 'no' if nothing else is specified.
485	>	*/
486	>	ssl_connection_required = no;
487
488	<	/* class: the class the oper joins when they successfully /oper */
488	>	/* class: the class the oper joins when they successfully /oper or /challenge. */
489		class = "opers";
490
491		/*
492	<	* umodes: default usermodes opers get when they /oper. If defined,
493	<	* it will override oper_umodes settings in general {}.
492	>	* umodes: the default usermodes opers get when they /oper or /challenge.
493	>	* If defined, it will override oper_umodes settings in general {}.
494		* Available usermodes:
495		*
496		* +b - bots         - See bot and drone flooding notices
#	Line 470 | Line 499 | operator {
499		* +d - debug        - See debugging notices
500		* +e - external     - See remote server connection and split notices
501		* +F - farconnect   - Remote client connection/quit notices
502	<	* +f - full         - See auth{} block full notices
502	>	* +f - full         - See auth {} block full notices
503		* +G - softcallerid - Server Side Ignore for users not on your channels
504		* +g - callerid     - Server Side Ignore (for privmsgs etc)
505		* +H - hidden       - Hides operator status to other users
506	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
478	<	*                     a channel
506	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
507		* +j - rej          - See rejected client notices
508		* +k - skill        - See server generated KILL messages
509		* +l - locops       - See LOCOPS messages
510		* +n - nchange      - See client nick changes
511	+	* +p - hidechans    - Hides channel list in WHOIS
512	+	* +q - hideidle     - Hides idle and signon time in WHOIS
513		* +R - nononreg     - Only receive private messages from registered clients
514		* +s - servnotice   - See general server notices
515		* +u - unauth       - See unauthorized client notices
516		* +w - wallop       - See server generated WALLOPS
517		* +y - spy          - See LINKS, STATS, TRACE notices etc.
488	–	* +z - operwall     - See oper generated WALLOPS
518		*/
519	<	umodes = locops, servnotice, operwall, wallop;
519	>	umodes = locops, servnotice, wallop;
520
521		/*
522	<	* privileges: controls the activities and commands an oper is
523	<	* allowed to do on the server. All options default to no.
524	<	* Available options:
522	>	* privileges: controls the activities and commands an oper is
523	>	* allowed to do on the server. All flags default to 'no'.
524	>	* Available flags:
525		*
526	<	* module         - allows MODULE
526	>	* admin          - gives administrator privileges    | ('A' flag)
527		* connect        - allows local CONNECT              | ('P' flag)
528		* connect:remote - allows remote CONNECT             | ('Q' flag)
529	<	* squit          - allows local SQUIT                | ('R' flag)
530	<	* squit:remote   - allows remote SQUIT               | ('S' flag)
529	>	* die            - allows DIE                        | ('D' flag)
530	>	* dline          - allows DLINE                      |
531	>	* gline          - allows GLINE                      | ('G' flag)
532	>	* globops        - allows GLOBOPS                    |
533		* kill           - allows to KILL local clients      | ('N' flag)
534		* kill:remote    - allows remote users to be /KILL'd | ('O' flag)
504	–	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
505	–	* dline          - allows DLINE                      |
506	–	* undline        - allows UNDLINE                    |
535		* kline          - allows KLINE                      | ('K' flag)
508	–	* unkline        - allows UNKLINE                    | ('U' flag)
509	–	* gline          - allows GLINE                      | ('G' flag)
510	–	* xline          - allows XLINE                      | ('X' flag)
536		* locops         - allows LOCOPS                     |
537	<	* globops        - allows GLOBOPS                    |
513	<	* wallops        - allows WALLOPS                    |
514	<	* operwall       - allows OPERWALL                   | ('L' flag)
537	>	* module         - allows MODULE                     |
538		* rehash         - allows oper to REHASH config      | ('H' flag)
539	<	* die            - allows DIE                        | ('D' flag)
539	>	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
540		* restart        - allows RESTART                    |
541		* set            - allows SET                        |
542	<	* admin          - gives administrator privileges    | ('A' flag)
542	>	* squit          - allows local SQUIT                | ('R' flag)
543	>	* squit:remote   - allows remote SQUIT               | ('S' flag)
544	>	* undline        - allows UNDLINE                    |
545	>	* unkline        - allows UNKLINE                    | ('U' flag)
546	>	* unxline        - allows UNXLINE                    |
547	>	* wallops        - allows WALLOPS                    |
548	>	* xline          - allows XLINE                      | ('X' flag)
549		*/
550	<	flags = kill, kill:remote, connect, connect:remote, kline, unkline,
551	<	xline, globops, restart, die, rehash, admin, operwall, module;
550	>	flags = admin, connect, connect:remote, die, globops, kill, kill:remote,
551	>	kline, module, rehash, restart, set, unkline, unxline, xline;
552		};
553
554		/*
555	<	* service {}: specifies what server may act as a network service
555	>	* service {}: specifies a server which may act as a network service
556		*
557	<	* NOTE: it is absolutely important that every single server on the network
558	<	*       has the same service{} block.
557	>	* NOTE: it is very important that every server on the network
558	>	*       has the same service {} block.
559		*/
560		service {
561		name = "service.someserver";
#	Line 534 | Line 563 | service {
563		};
564
565		/*
566	<	* connect {}:  controls servers we connect to
566	>	* connect {}: define a server to connect to
567		*/
568		connect {
569	<	/* name: the name of the server */
569	>	/* name: the name of the server. */
570		name = "irc.uplink.com";
571
572		/*
573	<	* host: the host or IP to connect to. If a hostname is used it
574	<	* must match the reverse dns of the server.
573	>	* host: the host or IP address to connect to. If a hostname is used it
574	>	* must match the reverse DNS of the server.
575		*/
576		host = "192.168.0.1";
577
578		/*
579	<	* vhost: the IP to bind to when we connect outward to servers.
579	>	* vhost: the IP address to bind to when making outgoing connections to
580	>	* servers.
581		* serverinfo::vhost and serverinfo::vhost6 will be overridden
582		* by this directive.
583		*/
584		vhost = "192.168.0.2";
585
586		/*
587	<	* passwords: the passwords we send (OLD C:) and accept (OLD N:).
588	<	* The remote server will have these passwords reversed.
587	>	* send_password, accept_password: the passwords to send and accept.
588	>	* The remote server will have these passwords swapped.
589		*/
590		send_password = "password";
591		accept_password = "anotherpassword";
#	Line 566 | Line 596 | connect {
596		*/
597		encrypted = no;
598
599	<	/* port: the port to connect to this server on */
599	>	/* port: the port to connect to this server on. */
600		port = 6666;
601
602		/*
#	Line 581 | Line 611 | connect {
611		*/
612		#       leaf_mask = "*.uk";
613
614	<	/* class: the class this server is in */
614	>	/* class: the class this server is in. */
615		class = "server";
616
617		/*
618	<	* ssl_cipher_list:
619	<	*
620	<	* List of ciphers that the server we are connecting to must support.
591	<	* If the server isn't capable of any cipher listed below, the
592	<	* connection will simply be rejected.
618	>	* ssl_cipher_list: list of ciphers that the server we are connecting to
619	>	* must support. If the server is not capable of using any of the ciphers
620	>	* listed below, the connection will simply be rejected.
621		* Can be used to enforce stronger ciphers, even though this option
622		* is not necessarily required to establish a SSL/TLS connection.
623		*
624		* Multiple ciphers are separated by colons. The order of preference
625		* is from left to right.
626		*/
627	<	#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
627	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
628	>
629	>	/*
630	>	* ssl_certificate_fingerprint: enhances security by additionally checking
631	>	* the server's client certificate fingerprint against the specified
632	>	* fingerprint below.
633	>	*/
634	>	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
635
636		/*
637		* autoconn   - controls whether we autoconnect to this server or not,
#	Line 627 | Line 662 | connect {
662		*/
663		cluster {
664		/*
665	<	* name: the server to share with, this can take wildcards
665	>	* name: the server to share with; this can take wildcards
666		*
667	<	* NOTE: only local actions will be clustered, meaning if
667	>	* NOTE: only local actions will be clustered, meaning that if
668		*       the server receives a shared kline/unkline/etc, it
669		*       will not be propagated to clustered servers.
670		*
671		*       Remote servers are not necessarily required to accept
672	<	*       clustered lines, they need a shared{} for *THIS* server
673	<	*       in order to accept them.
672	>	*       clustered lines, they need a shared {} block for *THIS*
673	>	*       server in order to accept them.
674		*/
675		name = "*.arpa";
676
677		/*
678	<	* type: list of what to share, options are as follows:
678	>	* type: list of what to share; options are as follows:
679		*      dline   - share dlines
680		*      undline - share undlines
681		*      kline   - share klines
#	Line 658 | Line 693 | cluster {
693		/*
694		* shared {}: users that are allowed to remote kline
695		*
696	<	* NOTE: This can be effectively used for remote klines.
696	>	* NOTE: This can effectively be used for remote klines.
697		*       Please note that there is no password authentication
698		*       for users setting remote klines. You must also be
699		*       /oper'd in order to issue a remote kline.
700		*/
701		shared {
702		/*
703	<	* name: the server the user must be on to set klines. If this is not
704	<	* specified, the user will be allowed to kline from all servers.
703	>	* name: the server the user must be connected to in order to set klines.
704	>	* If this is not specified, the user will be allowed to kline from all
705	>	* servers.
706		*/
707		name = "irc2.some.server";
708
#	Line 695 | Line 731 | shared {
731
732		/*
733		* kill {}:  users that are not allowed to connect
734	<	* Oper issued klines will be added to the specified kline config
734	>	* Oper issued klines will be added to the specified kline database
735		*/
736		kill {
737		user = "bad@*.hacked.edu";
#	Line 703 | Line 739 | kill {
739		};
740
741		/*
742	<	* deny {}:  IPs that are not allowed to connect (before DNS/ident lookup)
743	<	* Oper issued dlines will be added to the specified dline config
742	>	* deny {}:  IP addresses that are not allowed to connect
743	>	* (before DNS/ident lookup)
744	>	* Oper issued dlines will be added to the specified dline database
745		*/
746		deny {
747		ip = "10.0.1.0/24";
#	Line 712 | Line 749 | deny {
749		};
750
751		/*
752	<	* exempt {}:  IPs that are exempt from deny {} and Dlines
752	>	* exempt {}:  IP addresses that are exempt from deny {} and Dlines
753		*/
754		exempt {
755		ip = "192.168.0.0/16";
#	Line 722 | Line 759 | exempt {
759		* resv {}:  nicks and channels users may not use/join
760		*/
761		resv { mask = "clone*"; reason = "Clone bots"; };
762	+	resv { mask = "Global"; reason = "Reserved for services"; };
763		resv { mask = "ChanServ"; reason = "Reserved for services"; };
764		resv { mask = "NickServ"; reason = "Reserved for services"; };
765		resv { mask = "OperServ"; reason = "Reserved for services"; };
#	Line 735 | Line 773 | resv { mask = "#*services*"; reason = "R
773		resv {
774		/*
775		* mask: masks starting with a '#' are automatically considered
776	<	* as channel name mask.
776	>	* as channel name masks.
777		*/
778		mask = "#helsinki";
779	<	reason = "Channel is reserved for finnish inhabitants";
779	>	reason = "Channel is reserved for Finnish inhabitants";
780
781		/*
782		* exempt: can be either a ISO 3166 alpha-2 two letter country
#	Line 749 | Line 787 | resv {
787		};
788
789		/*
790	<	* gecos {}:  Used for banning users based on their "realname".
790	>	* gecos {}:  used for banning users based on their "realname".
791		*/
792		gecos {
793		name = "*sex*";
#	Line 762 | Line 800 | gecos {
800		};
801
802		/*
803	<	* channel {}:  The channel block contains options pertaining to channels
803	>	* pseudo {}: adds pseudo/custom commands also known as service aliases
804	>	*/
805	>	pseudo {
806	>	/* command: the actual command/alias */
807	>	command = "IDENTIFY";
808	>
809	>	/* prepend: optional text that can be prepended before the user's message */
810	>	prepend = "IDENTIFY ";
811	>
812	>	/* name: the service name, used for error messages */
813	>	name = "NickServ";
814	>
815	>	/* target: the actual target where this message should be sent to */
816	>	target = "NickServ@service.someserver";
817	>	};
818	>
819	>	pseudo {
820	>	command = "CHANSERV";
821	>	name = "ChanServ";
822	>	target = "ChanServ@service.someserver";
823	>	};
824	>
825	>	pseudo {
826	>	command = "CS";
827	>	name = "ChanServ";
828	>	target = "ChanServ@service.someserver";
829	>	};
830	>
831	>	pseudo {
832	>	command = "NICKSERV";
833	>	name = "NickServ";
834	>	target = "NickServ@service.someserver";
835	>	};
836	>
837	>	pseudo {
838	>	command = "NS";
839	>	name = "NickServ";
840	>	target = "NickServ@service.someserver";
841	>	};
842	>
843	>	pseudo {
844	>	command = "MEMOSERV";
845	>	name = "MemoServ";
846	>	target = "MemoServ@service.someserver";
847	>	};
848	>
849	>	pseudo {
850	>	command = "MS";
851	>	name = "MemoServ";
852	>	target = "MemoServ@service.someserver";
853	>	};
854	>
855	>	pseudo {
856	>	command = "OPERSERV";
857	>	name = "OperServ";
858	>	target = "OperServ@service.someserver";
859	>	};
860	>
861	>	pseudo {
862	>	command = "OS";
863	>	name = "OperServ";
864	>	target = "OperServ@service.someserver";
865	>	};
866	>
867	>	pseudo {
868	>	command = "HOSTSERV";
869	>	name = "HostServ";
870	>	target = "HostServ@service.someserver";
871	>	};
872	>
873	>	pseudo {
874	>	command = "HS";
875	>	name = "HostServ";
876	>	target = "HostServ@service.someserver";
877	>	};
878	>
879	>	pseudo {
880	>	command = "BOTSERV";
881	>	name = "BotServ";
882	>	target = "BotServ@service.someserver";
883	>	};
884	>
885	>	pseudo {
886	>	command = "BS";
887	>	name = "BotServ";
888	>	target = "BotServ@service.someserver";
889	>	};
890	>
891	>	/*
892	>	* channel {}:  the channel block contains options pertaining to channels
893		*/
894		channel {
895		/*
896		* disable_fake_channels: this option, if set to 'yes', will
897	<	* disallow clients to create or join channels that have one
897	>	* disallow clients from creating or joining channels that have one
898		* of the following ASCII characters in their name:
899		*
900		*   2 | bold
#	Line 781 | Line 908 | channel {
908		disable_fake_channels = yes;
909
910		/*
911	<	* knock_delay: The amount of time a user must wait between issuing
912	<	* the knock command.
911	>	* invite_client_count, invite_client_time: how many INVITE commands
912	>	* are permitted per client per invite_client_time.
913		*/
914	<	knock_delay = 5 minutes;
914	>	invite_client_count = 10;
915	>	invite_client_time = 5 minutes;
916
917		/*
918	<	* knock_delay_channel: How often a knock to any specific channel
919	<	* is permitted, regardless of the user sending the knock.
918	>	* knock_client_count, knock_client_time: how many KNOCK commands
919	>	* are permitted per client per knock_client_time.
920		*/
921	<	knock_delay_channel = 1 minute;
921	>	knock_client_count = 1;
922	>	knock_client_time = 5 minutes;
923
924		/*
925	<	* max_chans_per_user: The maximum number of channels a user can
926	<	* join/be on.
925	>	* knock_delay_channel: how often a KNOCK to any specific channel
926	>	* is permitted, regardless of the user sending the KNOCK.
927		*/
928	<	max_chans_per_user = 25;
928	>	knock_delay_channel = 1 minute;
929
930		/*
931	<	* max_chans_per_oper: The maximum number of channels an oper can
932	<	* join/be on.
931	>	* max_channels: the maximum number of channels a user can join/be on.
932	>	* This is a default value which can be overriden with class {} blocks.
933		*/
934	<	max_chans_per_oper = 50;
934	>	max_channels = 25;
935
936		/* max_bans: maximum number of +b/e/I modes in a channel */
937		max_bans = 100;
938
939		/*
940	<	* how many joins in how many seconds constitute a flood, use 0 to
940	>	* how many joins in how many seconds constitute a flood. Use 0 to
941		* disable. +b opers will be notified (changeable via /set)
942		*/
943		join_flood_count = 16;
944		join_flood_time = 8 seconds;
945
946		/*
947	<	* splitcode: The ircd will now check splitmode every few seconds.
947	>	* The ircd will now check splitmode (whether a server is split from
948	>	* the network) every few seconds; this functionality is known as
949	>	* splitcode and is influenced by the options below.
950		*
951		* Either split users or split servers can activate splitmode, but
952		* both conditions must be met for the ircd to deactivate splitmode.
953	<	*
953	>	*
954		* You may force splitmode to be permanent by /quote set splitmode on
955		*/
956
#	Line 835 | Line 966 | channel {
966		*/
967		default_split_server_count = 0;
968
969	<	/* no_create_on_split: disallow users creating channels on split. */
969	>	/* no_create_on_split: do not allow users to create channels on split. */
970		no_create_on_split = yes;
971
972	<	/* no_join_on_split: disallow users joining channels at all on a split. */
972	>	/* no_join_on_split: do not allow users to join channels on a split. */
973		no_join_on_split = no;
974		};
975
976		/*
977	<	* serverhide {}:  The serverhide block contains the options regarding
978	<	* serverhiding
977	>	* serverhide {}:  the serverhide block contains the options regarding
978	>	* to server hiding. For more information regarding server hiding,
979	>	* please see doc/serverhide.txt
980		*/
981		serverhide {
982		/*
983	<	* disable_remote_commands: disable users doing commands
983	>	* disable_remote_commands: disable users issuing commands
984		* on remote servers.
985		*/
986		disable_remote_commands = no;
987
988		/*
989		* flatten_links: this option will show all servers in /links appear
990	<	* that they are linked to this current server.
990	>	* as though they are linked to this current server.
991		*/
992		flatten_links = no;
993
#	Line 879 | Line 1011 | serverhide {
1011
1012		/*
1013		* hide_services: define this if you want to hide the location of
1014	<	* services servers that are specified in the service{} block.
1014	>	* services servers that are specified in the service {} block.
1015		*/
1016		hide_services = no;
1017
1018		/*
1019	<	* Use this as the servername users see if hide_servers = yes.
1019	>	* hidden_name: use this as the servername users see if hide_servers = yes.
1020		*/
1021		hidden_name = "*.hidden.com";
1022
1023		/*
1024	<	* hide_server_ips: If this is disabled, opers will be unable to see
1025	<	* servers ips and will be shown a masked ip, admins will be shown the
1026	<	* real ip.
1027	<	*
1028	<	* If this is enabled, nobody can see a servers ip. *This is a kludge*,
1029	<	* it has the side effect of hiding the ips everywhere, including
1030	<	* logfiles.
1024	>	* hide_server_ips: if this is disabled, opers will be unable to see
1025	>	* servers' IP addresses and will be shown a masked IP address; admins
1026	>	* will be shown the real IP address.
1027	>	*
1028	>	* If this is enabled, nobody can see a server's IP address.
1029	>	* *This is a kludge*: it has the side effect of hiding the IP addresses
1030	>	* everywhere, including logfiles.
1031		*
1032		* We recommend you leave this disabled, and just take care with who you
1033		* give administrator privileges to.
#	Line 904 | Line 1036 | serverhide {
1036		};
1037
1038		/*
1039	<	* general {}:  The general block contains many of the options that were once
1039	>	* general {}:  the general block contains many of the options that were once
1040		* compiled in options in config.h
1041		*/
1042		general {
1043	<	/* services_name: servername of nick/channel services */
1044	<	services_name = "service.someserver";
1043	>	/*
1044	>	* cycle_on_host_change: sends a fake QUIT/JOIN combination
1045	>	* when services change the hostname of a specific client.
1046	>	*/
1047	>	cycle_on_host_change = yes;
1048
1049		/* max_watch: maximum WATCH entries a client can have. */
1050	<	max_watch = 60;
1050	>	max_watch = 30;
1051	>
1052	>	/* max_accept: maximum allowed /accept's for +g usermode. */
1053	>	max_accept = 30;
1054
1055	<	/* gline_enable: enable glines, network wide temp klines. */
1055	>	/* gline_enable: enable glines (network-wide temporary klines). */
1056		gline_enable = yes;
1057
1058		/*
1059	<	* gline_duration: the amount of time a gline will remain on your
1059	>	* gline_duration: the amount of time a G-line will remain on your
1060		* server before expiring.
1061		*/
1062		gline_duration = 1 day;
#	Line 931 | Line 1069 | general {
1069
1070		/*
1071		* gline_min_cidr: the minimum required length of a CIDR bitmask
1072	<	* for IPv4 based glines.
1072	>	* for IPv4 based G-lines.
1073		*/
1074		gline_min_cidr = 16;
1075
1076		/*
1077		* gline_min_cidr6: the minimum required length of a CIDR bitmask
1078	<	* for IPv6 based glines.
1078	>	* for IPv6 based G-lines.
1079		*/
1080		gline_min_cidr6 = 48;
1081
1082		/*
1083	<	* Whether to automatically set mode +i on connecting users.
1083	>	* invisible_on_connect: whether to automatically set mode +i on
1084	>	* connecting users.
1085		*/
1086		invisible_on_connect = yes;
1087
1088		/*
1089	<	* kill_chase_time_limit: maximum time from the nickname change that
1090	<	* still causes KILL automatically to switch for the current nick of
1091	<	* that user.
1089	>	* kill_chase_time_limit: KILL chasing is a feature whereby a KILL
1090	>	* issued for a user who has recently changed nickname will be applied
1091	>	* automatically to the new nick. kill_chase_time_limit is the maximum
1092	>	* time following a nickname change that this chasing will apply.
1093		*/
1094	<	kill_chase_time_limit = 90 seconds;
1094	>	kill_chase_time_limit = 30 seconds;
1095
1096		/*
1097		* hide_spoof_ips: if disabled, opers will be allowed to see the real
1098	<	* IP of spoofed users in /trace etc. If this is defined they will be
1099	<	* shown a masked IP.
1098	>	* IP address of spoofed users in /trace etc. If this is defined they
1099	>	* will be shown a masked IP.
1100		*/
1101		hide_spoof_ips = yes;
1102
1103		/*
1104	<	* Ignore bogus timestamps from other servers. Yes, this will desync the
1105	<	* network, but it will allow chanops to resync with a valid non TS 0
1104	>	* ignore_bogus_ts: ignore bogus timestamps from other servers.
1105	>	* Yes, this will desync the network, but it will allow chanops
1106	>	* to resync with a valid non TS 0.
1107		*
1108		* This should be enabled network wide, or not at all.
1109		*/
#	Line 982 | Line 1123 | general {
1123
1124		/*
1125		* default_floodcount: the default value of floodcount that is configurable
1126	<	* via /quote set floodcount. This is the amount of lines a user
1127	<	* may send to any other user/channel in one second.
1126	>	* via /quote set floodcount. This is the number of lines a user may send
1127	>	* to any other user/channel in one second.
1128		*/
1129		default_floodcount = 10;
1130
1131		/*
1132	<	* failed_oper_notice: send a notice to all opers on the server when
1132	>	* failed_oper_notice: send a notice to all opers on the server when
1133		* someone tries to OPER and uses the wrong password, host or ident.
1134		*/
1135		failed_oper_notice = yes;
1136
1137		/*
1138	<	* dots_in_ident: the amount of '.' characters permitted in an ident
1138	>	* dots_in_ident: the number of '.' characters permitted in an ident
1139		* reply before the user is rejected.
1140		*/
1141		dots_in_ident = 2;
1142
1143		/*
1144	<	* min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1145	<	* placed via the server. K-lines hand placed are exempt from limits.
1146	<	* Wildcard chars: '.', ':', '*', '?', '@', '!'
1144	>	* min_nonwildcard: the minimum number of non-wildcard characters in
1145	>	* k/d/g lines placed via the server. K-lines hand-placed are exempt from
1146	>	* this limit.
1147	>	* Wildcard characters: '.', ':', '*', '?', '@', '!'
1148		*/
1149		min_nonwildcard = 4;
1150
1151		/*
1152	<	* min_nonwildcard_simple: the minimum non wildcard characters in
1153	<	* gecos bans. Wildcard chars: '*', '?'
1152	>	* min_nonwildcard_simple: the minimum number of non-wildcard characters
1153	>	* in gecos bans. Wildcard characters: '*', '?'
1154		*/
1155		min_nonwildcard_simple = 3;
1156
1015	–	/* max_accept: maximum allowed /accept's for +g usermode. */
1016	–	max_accept = 20;
1017	–
1157		/* anti_nick_flood: enable the nickflood control code. */
1158		anti_nick_flood = yes;
1159
1160	<	/* nick flood: the nick changes allowed in the specified period */
1160	>	/* nick flood: the number of nick changes allowed in the specified period. */
1161		max_nick_time = 20 seconds;
1162		max_nick_changes = 5;
1163
1164		/*
1165	+	* away_count, away_time: how many AWAY command are permitted per
1166	+	* client per away_time.
1167	+	*/
1168	+	away_count = 2;
1169	+	away_time = 10 seconds;
1170	+
1171	+	/*
1172		* anti_spam_exit_message_time: the minimum time a user must be connected
1173		* before custom quit messages are allowed.
1174		*/
1175		anti_spam_exit_message_time = 5 minutes;
1176
1177		/*
1178	<	* ts delta: the time delta allowed between server clocks before
1179	<	* a warning is given, or before the link is dropped. All servers
1180	<	* should run ntpdate/rdate to keep clocks in sync
1178	>	* ts_warn_delta, ts_max_delta: the time delta allowed between server
1179	>	* clocks before a warning is given, or before the link is dropped.
1180	>	* All servers should run ntpdate/rdate to keep clocks in sync.
1181		*/
1182	<	ts_warn_delta = 30 seconds;
1183	<	ts_max_delta = 5 minutes;
1182	>	ts_warn_delta = 3 seconds;
1183	>	ts_max_delta = 15 seconds;
1184
1185		/*
1186	<	* warn_no_nline: warn opers about servers that try to connect but
1187	<	* we don't have a connect {} block for. Twits with misconfigured
1188	<	* servers can get really annoying with this enabled.
1186	>	* warn_no_connect_block: warn opers about servers that try to connect
1187	>	* but for which we don't have a connect {} block. Twits with
1188	>	* misconfigured servers can become really annoying with this enabled.
1189		*/
1190	<	warn_no_nline = yes;
1190	>	warn_no_connect_block = yes;
1191
1192		/*
1193		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1194		* operators and administrators. Doing so is a good idea in case
1195	<	* there are any exempted (exempt{}) server IPs you don't want to
1195	>	* there are any exempted (exempt {}) server IPs you don't want to
1196		* see leaked.
1197		*/
1198		stats_e_disabled = no;
1199
1200	<	/* stats_o_oper only: make stats o (opers) oper only */
1200	>	/* stats_o_oper_only: make stats o (opers) oper only. */
1201		stats_o_oper_only = yes;
1202
1203	<	/* stats_P_oper_only: make stats P (ports) oper only */
1203	>	/* stats_P_oper_only: make stats P (ports) oper only. */
1204		stats_P_oper_only = yes;
1205
1206	+	/* stats_u_oper_only: make stats u (uptime) oper only. */
1207	+	stats_u_oper_only = no;
1208	+
1209		/*
1210	<	* stats i oper only: make stats i (auth {}) oper only. Set to:
1211	<	*     yes    - show users no auth blocks, made oper only.
1212	<	*     masked - show users first matching auth block
1213	<	*     no     - show users all auth blocks.
1210	>	* stats_i_oper_only: make stats i (auth {}) oper only. Set to:
1211	>	*     yes    - show users no auth {} blocks, made oper only
1212	>	*     masked - show users the first matching auth {} block
1213	>	*     no     - show users all auth {} blocks
1214		*/
1215		stats_i_oper_only = yes;
1216
1217		/*
1218		* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1219	<	*     yes    - show users no auth blocks, made oper only
1220	<	*     masked - show users first matching auth block
1221	<	*     no     - show users all auth blocks.
1219	>	*     yes    - show users no auth {} blocks, made oper only
1220	>	*     masked - show users the first matching auth {} block
1221	>	*     no     - show users all auth {} blocks
1222		*/
1223		stats_k_oper_only = yes;
1224
#	Line 1081 | Line 1230 | general {
1230
1231		/*
1232		* opers_bypass_callerid: allows operators to bypass +g and message
1233	<	* anyone who has it set (useful if you use services).
1233	>	* anyone who has it set.
1234		*/
1235		opers_bypass_callerid = no;
1236
1237		/*
1238	<	* pace_wait_simple: time between use of less intensive commands
1239	<	* (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1238	>	* pace_wait_simple: minimum time required between use of less
1239	>	* intensive commands
1240	>	* (ADMIN, HELP, LUSERS, VERSION, remote WHOIS)
1241		*/
1242		pace_wait_simple = 1 second;
1243
1244		/*
1245	<	* pace_wait: time between more intensive commands
1246	<	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1245	>	* pace_wait: minimum time required between use of more intensive commands
1246	>	* (INFO, LINKS, MAP, MOTD, STATS, WHO, WHOWAS)
1247		*/
1248		pace_wait = 10 seconds;
1249
1250		/*
1251	<	* short_motd: send clients a notice telling them to read the motd
1252	<	* instead of forcing a motd to clients who may simply ignore it.
1251	>	* short_motd: send clients a notice telling them to read the MOTD
1252	>	* instead of forcing an MOTD to clients who may simply ignore it.
1253		*/
1254		short_motd = no;
1255
1256		/*
1257	<	* ping_cookie: require clients to respond exactly to a ping command,
1257	>	* ping_cookie: require clients to respond exactly to a PING command,
1258		* can help block certain types of drones and FTP PASV mode spoofing.
1259		*/
1260		ping_cookie = no;
#	Line 1114 | Line 1264 | general {
1264
1265		/*
1266		* true_no_oper_flood: completely eliminate flood limits for opers
1267	<	* and for clients with can_flood = yes in their auth {} blocks.
1267	>	* and for clients with 'can_flood' in their auth {} blocks.
1268		*/
1269		true_no_oper_flood = yes;
1270
1271		/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1272		oper_pass_resv = yes;
1273
1274	<	/* REMOVE ME.  The following line checks you've been reading. */
1274	>	/* REMOVE ME. The following line checks that you have been reading. */
1275		havent_read_conf = 1;
1276
1277		/*
1278	<	* max_targets: the maximum amount of targets in a single
1278	>	* max_targets: the maximum number of targets in a single
1279		* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1280		*/
1281		max_targets = 4;
#	Line 1139 | Line 1289 | general {
1289		* +d - debug        - See debugging notices
1290		* +e - external     - See remote server connection and split notices
1291		* +F - farconnect   - Remote client connection/quit notices
1292	<	* +f - full         - See auth{} block full notices
1292	>	* +f - full         - See auth {} block full notices
1293		* +G - softcallerid - Server Side Ignore for users not on your channels
1294		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1295		* +H - hidden       - Hides operator status to other users
1296	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
1147	<	*                     a channel
1296	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
1297		* +j - rej          - See rejected client notices
1298		* +k - skill        - See server generated KILL messages
1299		* +l - locops       - See LOCOPS messages
1300		* +n - nchange      - See client nick changes
1301	+	* +p - hidechans    - Hides channel list in WHOIS
1302	+	* +q - hideidle     - Hides idle and signon time in WHOIS
1303		* +R - nononreg     - Only receive private messages from registered clients
1304		* +s - servnotice   - See general server notices
1305		* +u - unauth       - See unauthorized client notices
1306		* +w - wallop       - See server generated WALLOPS
1307		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1157	–	* +z - operwall     - See oper generated WALLOPS
1308		*/
1309
1310	<	/* oper_only_umodes: usermodes only opers may set */
1311	<	oper_only_umodes = bots, cconn, debug, full, hidden, skill,
1312	<	nchange, rej, spy, external, operwall,
1163	<	locops, unauth, farconnect;
1310	>	/* oper_only_umodes: usermodes only operators may set. */
1311	>	oper_only_umodes = bots, cconn, debug, external, farconnect, full, hidden, locops,
1312	>	nchange, rej, skill, spy, unauth;
1313
1314	<	/* oper_umodes: default usermodes opers get when they /oper */
1315	<	oper_umodes = bots, locops, servnotice, operwall, wallop;
1314	>	/* oper_umodes: default usermodes operators get when they /oper or /challenge. */
1315	>	oper_umodes = bots, locops, servnotice, wallop;
1316
1317		/*
1318	<	* use_egd: if your system does not have *random devices yet you
1319	<	* want to use OpenSSL and encrypted links, enable this. Beware -
1171	<	* EGD is *very* CPU intensive when gathering data for its pool.
1318	>	* throttle_count: the maximum number of connections from the same
1319	>	* IP address allowed in throttle_time duration.
1320		*/
1321	<	#       use_egd = yes;
1321	>	throttle_count = 1;
1322
1323		/*
1324	<	* egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1325	<	* which automatically finds the path.
1326	<	*/
1179	<	#       egdpool_path = "/var/run/egd-pool";
1180	<
1181	<	/*
1182	<	* throttle_time: the minimum amount of time between connections from
1183	<	* the same ip. exempt {} blocks are excluded from this throttling.
1324	>	* throttle_time: the minimum amount of time required between
1325	>	* connections from the same IP address. exempt {} blocks are
1326	>	* excluded from this throttling.
1327		* Offers protection against flooders who reconnect quickly.
1328		* Set to 0 to disable.
1329		*/
1330	<	throttle_time = 10;
1330	>	throttle_time = 2 seconds;
1331		};
1332
1333		modules {
#	Line 1192 | Line 1335 | modules {
1335		* path: other paths to search for modules specified below
1336		* and in "/module load".
1337		*/
1338	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1339	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1338	>	path = "lib/ircd-hybrid/modules";
1339	>	path = "lib/ircd-hybrid/modules/autoload";
1340
1341		/* module: the name of a module to load on startup/rehash. */
1342		#       module = "some_module.la";
#	Line 1208 | Line 1351 | log {
1351
1352		file {
1353		type = oper;
1354	<	name = "/usr/local/ircd/var/log/oper.log";
1354	>	name = "var/log/oper.log";
1355		size = unlimited;
1356		};
1357
1358		file {
1359		type = user;
1360	<	name = "/usr/local/ircd/var/log/user.log";
1360	>	name = "var/log/user.log";
1361		size = 50 megabytes;
1362		};
1363
1364		file {
1365		type = kill;
1366	<	name = "/usr/local/ircd/var/log/kill.log";
1366	>	name = "var/log/kill.log";
1367		size = 50 megabytes;
1368		};
1369
1370		file {
1371		type = kline;
1372	<	name = "/usr/local/ircd/var/log/kline.log";
1372	>	name = "var/log/kline.log";
1373		size = 50 megabytes;
1374		};
1375
1376		file {
1377		type = dline;
1378	<	name = "/usr/local/ircd/var/log/dline.log";
1378	>	name = "var/log/dline.log";
1379		size = 50 megabytes;
1380		};
1381
1382		file {
1383		type = gline;
1384	<	name = "/usr/local/ircd/var/log/gline.log";
1384	>	name = "var/log/gline.log";
1385	>	size = 50 megabytes;
1386	>	};
1387	>
1388	>	file {
1389	>	type = xline;
1390	>	name = "var/log/xline.log";
1391	>	size = 50 megabytes;
1392	>	};
1393	>
1394	>	file {
1395	>	type = resv;
1396	>	name = "var/log/resv.log";
1397		size = 50 megabytes;
1398		};
1399
1400		file {
1401		type = debug;
1402	<	name = "/usr/local/ircd/var/log/debug.log";
1402	>	name = "var/log/debug.log";
1403		size = 50 megabytes;
1404		};
1405		};

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)