ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/doc/reference.conf

Comparing ircd-hybrid/trunk/doc/reference.conf (file contents):
Revision 2196 by michael, Tue Jun 4 18:30:12 2013 UTC vs.
Revision 3882 by michael, Fri Jun 6 17:09:56 2014 UTC

#	Line 1 | Line 1
1	<	/* ircd-hybrid reference configuration file
2	<	* Copyright (C) 2000-2013 Hybrid Development Team
1	>	/*
2	>	* This is an example configuration file for ircd-hybrid
3		*
4	<	* Written by ejb, wcampbel, db, leeh and others
4	>	* Copyright (c) 2000-2014 ircd-hybrid development team
5		*
6		* $Id$
7		*/
8
9		/*
10		* ########################################################################
11	<	* IMPORTANT NOTES:
11	>	* IMPORTANT NOTE:
12		*
13	<	* auth {} blocks MUST be specified in order of precedence.  The first one
14	<	* that matches a user will be used.  So place spoofs first, then specials,
13	>	* auth {} blocks MUST be specified in order of precedence. The first one
14	>	* that matches a user will be used. So place spoofs first, then specials,
15		* then general access.
16		* ########################################################################
17		*
#	Line 23 | Line 23
23		*
24		* Times/durations are written as:
25		*        12 hours 30 minutes 1 second
26	<	*
26	>	*
27		* Valid units of time:
28		*        year, month, week, day, hour, minute, second
29		*
30		* Valid units of size:
31		*        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
32		*
33	<	* Sizes and times may be singular or plural.
34	<	*/
33	>	* Sizes and times may be singular or plural.
34	>	*/
35
36
37		/*
#	Line 39 | Line 39
39		*/
40		serverinfo {
41		/*
42	<	* name: the name of this server.  This cannot be changed at runtime.
42	>	* name: the name of this server. This cannot be changed at runtime.
43		*/
44		name = "hades.arpa";
45
46		/*
47	<	* sid: a server's unique ID.  This is three characters long and must
48	<	* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
47	>	* sid: a server's unique ID. This is three characters long and must
48	>	* be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	+	*
51		* NOTE: The letters must be capitalized. This cannot be changed at runtime.
52		*/
53		sid = "0HY";
#	Line 76 | Line 77 | serverinfo {
77		#       vhost = "192.169.0.1";
78
79		/*
80	<	* vhost6: the IP to bind to when we connect outward to ipv6 servers.
81	<	* This should be an ipv6 IP only, or "*" for INADDR_ANY.
80	>	* vhost6: the address to bind to when we make outgoing connections
81	>	* to IPv6 servers. This should be an IPv6 address, or "*" for INADDR_ANY.
82		*/
83		#       vhost6 = "3ffe:80e8:546::2";
84
#	Line 98 | Line 99 | serverinfo {
99		max_topic_length = 160;
100
101		/*
102	<	* rsa_private_key_file: the path to the file containing our
103	<	* rsa key for cryptlink.
102	>	* rsa_private_key_file: the path to the file containing the
103	>	* RSA key.
104	>	*
105	>	* Example commands to store a 2048 bit RSA key in rsa.key:
106		*
104	–	* Example command to store a 2048 bit RSA keypair in
105	–	* rsa.key, and the public key in rsa.pub:
106	–	*
107		*      openssl genrsa -out rsa.key 2048
108	<	*      openssl rsa -in rsa.key -pubout -out rsa.pub
109	<	*      chown <ircd-user>.<ircd.group> rsa.key rsa.pub
108	>	*      chown <ircd-user>.<ircd.group> rsa.key
109		*      chmod 0600 rsa.key
111	–	*      chmod 0644 rsa.pub
110		*/
111		#       rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
112
113		/*
114		* ssl_certificate_file: the path to the file containing our
115	<	* ssl certificate for encrypted client connection.
115	>	* SSL certificate for encrypted client connection.
116		*
117		* This assumes your private RSA key is stored in rsa.key. You
118		* MUST have an RSA key in order to generate the certificate.
#	Line 138 | Line 136 | serverinfo {
136		* ssl_dh_param_file:
137		*
138		* Path to the PEM encoded Diffie-Hellman parameter file.
139	<	* DH parameters are strictly required when using ciphers
140	<	* with EDH (ephemeral Diffie-Hellman) key exchange.
139	>	* DH parameters are required when using ciphers with EDH
140	>	* (ephemeral Diffie-Hellman) key exchange.
141		*
142		* A DH parameter file can be created by running:
143		*
144	<	*      openssl dhparam -out dhparam.pem 1024
144	>	*      openssl dhparam -out dhparam.pem 2048
145		*
146		* Prime size must be at least 1024 bits. Further information
147		* regarding specific OpenSSL dhparam command-line options
#	Line 154 | Line 152 | serverinfo {
152		/*
153		* ssl_cipher_list:
154		*
155	<	* List of ciphers that are supported by _this_ server. Can be used to
155	>	* List of ciphers to support on _this_ server. Can be used to
156		* enforce specific ciphers for incoming SSL/TLS connections.
157	<	* If a client (which also includes incoming server connections) isn't
158	<	* capable of any cipher listed below, the connection will simply be
159	<	* rejected.
157	>	* If a client (which also includes incoming server connections) is not
158	>	* capable of using any of the ciphers listed here, the connection will
159	>	* simply be rejected.
160		*
161	<	* A list of supported ciphers can be obtained by running:
161	>	* A list of supported ciphers by OpenSSL can be obtained by running:
162		*
163		*      openssl ciphers -ssl3 -tls1 -v
164		*
165		* Multiple ciphers are separated by colons. The order of preference is
166		* from left to right.
167		*/
168	<	#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
168	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
169
170		/*
171		* ssl_server_method:
#	Line 205 | Line 203 | class {
203
204		/*
205		* number_per_ip: how many local users are allowed to connect
206	<	* from one IP  (optional)
206	>	* from a single IP address  (optional)
207		*/
208		number_per_ip = 2;
209
210		/*
211		* max_local: how many local users are allowed to connect
212	<	* from one ident@host  (optional)
212	>	* from a single ident@host  (optional)
213		*/
214		max_local = 2;
215
#	Line 234 | Line 232 | class {
232		number_per_cidr = 16;
233
234		/*
235	<	* sendq: the amount of data allowed in a clients send queue before
235	>	* sendq: the amount of data allowed in a client's send queue before
236		* they are dropped.
237		*/
238		sendq = 100 kbytes;
239
240		/*
241	<	* recvq: maximum amount of data in a clients receive queue before
241	>	* recvq: the amount of data allowed in a client's receive queue before
242		* they are dropped for flooding. Defaults to 2560 if the chosen
243		* value isn't within the range of 512 to 8000.
244		*/
#	Line 267 | Line 265 | class {
265		/*
266		* flags:
267		*
268	<	* random_idle          - idle time is randomly selected within the
269	<	*                        range of min_idle to max_idle
270	<	* hide_idle_from_opers - fake idle time will be shown to operators, too
268	>	* random_idle          - a fake idle time is set randomly between
269	>	*                        min_idle and max_idle
270	>	* hide_idle_from_opers - the fake idle time will also be shown to operators
271		*/
272		flags = random_idle, hide_idle_from_opers;
273		};
#	Line 284 | Line 282 | class {
282		*/
283		connectfreq = 5 minutes;
284
285	<	/* max number: the amount of servers to autoconnect to. */
285	>	/* max number: the number of servers to autoconnect to. */
286		max_number = 1;
287
288		/* sendq: servers need a higher sendq as they send more data. */
#	Line 292 | Line 290 | class {
290		};
291
292		/*
293	<	* motd {}: specifies various MOTD files. Applies to local users only.
293	>	* motd {}: Allows the display of a different MOTD to a client
294	>	* depending on its origin. Applies to local users only.
295		*/
296		motd {
297		/*
298		* mask: multiple mask entries are permitted. Mask can either be
299	<	* a class name or a hostname.
299	>	* a class name or a hostname. CIDR is supported.
300		*/
301		mask = "*.at";
302		mask = "*.de";
#	Line 314 | Line 313 | motd {
313		*/
314		listen {
315		/*
316	<	* port: the specific port to listen on. If no host is specified
317	<	* before, it will listen on all available IPs.
316	>	* port: the port to listen on. If no host is specified earlier
317	>	* in the listen {} block, it will listen on all available IPs.
318		*
319	<	* Ports are separated via a comma, a range may be specified using ".."
319	>	* Ports are separated by commas; a range may be specified using ".."
320		*/
321	<
322	<	/* port: listen on all available IPs, ports 6665 to 6669 */
321	>
322	>	/* port: listen on all available IP addresses, ports 6665 to 6669 */
323		port = 6665 .. 6669;
324
325		/*
326	<	* Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
326	>	* Listen on 192.168.0.1/6697 with SSL enabled and hidden from STATS P
327		* unless you are an administrator.
328		*
329	<	* NOTE: The "flags" directive has to come before "port". Always!
329	>	* NOTE: The "flags" directive always has to come before "port".
330		*
331		* Currently available flags are:
332		*
#	Line 340 | Line 339 | listen {
339		port = 6697;
340
341		/*
342	<	* host: set a specific IP/host the ports after the line will listen
343	<	* on. This may be ipv4 or ipv6.
342	>	* host: set a specific IP address/host to listen on using the
343	>	* subsequent port definitions. This may be IPv4 or IPv6.
344		*/
345		host = "1.2.3.4";
346		port = 7000, 7001;
#	Line 356 | Line 355 | listen {
355		auth {
356		/*
357		* user: the user@host allowed to connect. Multiple user
358	<	* lines are permitted per auth block.
358	>	* lines are permitted within each auth block.
359		*/
360		user = "*@172.16.0.0/12";
361		user = "*test@123D:B567:*";
#	Line 371 | Line 370 | auth {
370		encrypted = yes;
371
372		/*
373	<	* spoof: fake the users host to this. This is free-form, just do
373	>	* spoof: fake the user's host to this. This is free-form, just do
374		* everyone a favor and don't abuse it. ('=' prefix on /stats I)
375		*/
376		spoof = "I.still.hate.packets";
#	Line 401 | Line 400 | auth {
400		auth {
401		/*
402		* redirect: the server and port to redirect a user to. A user does not
403	<	* have to obey the redirection, the ircd just suggests an alternative
403	>	* have to obey the redirection; the ircd just suggests an alternative
404		* server for them.
405		*/
406		redirserv = "this.is.not.a.real.server";
407		redirport = 6667;
408	<
408	>
409		user = "*.server";
410
411		/* class: a class is required even though it is not used */
#	Line 427 | Line 426 | operator {
426		name = "sheep";
427
428		/*
429	<	* user: the user@host required for this operator. Multiple
430	<	* user="" lines are supported.
429	>	* user: the user@host required for this operator. Multiple user
430	>	* lines are permitted within each operator block.
431		*/
432		user = "*sheep@192.168.0.0/16";
433		user = "*@127.0.0.0/8";
#	Line 438 | Line 437 | operator {
437		* need to be encrypted by using the provided mkpasswd tool.
438		* Several password hash algorithms are available depending
439		* on your system's crypt() implementation. For example, a modern
440	<	* glibc already has support for SHA-256/512, and MD5 encryption
440	>	* glibc already has support for the SHA-256/512 and MD5 encryption
441		* algorithms.
442		*/
443		password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
#	Line 451 | Line 450 | operator {
450
451		/*
452		* rsa_public_key_file: the public key for this oper when using Challenge.
453	<	* A password should not be defined when this is used, see
453	>	* A password should not be defined when this is used; see
454		* doc/challenge.txt for more information.
455		*/
456		#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
457
458	+	/*
459	+	* ssl_certificate_fingerprint: enhances security by additionally checking
460	+	* the oper's client certificate fingerprint against the specified
461	+	* fingerprint below.
462	+	*
463	+	* Hint: your users can use the following command to obtain a SHA-256 hash
464	+	* of their ssl certificate:
465	+	*
466	+	*      openssl x509 -sha256 -noout -fingerprint -in cert.pem | sed -e 's/^.*=//;s/://g'
467	+	*/
468	+	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
469	+
470	+	/*
471	+	* ssl_connection_required: client must be connected over SSL/TLS
472	+	* in order to be able to use this oper{} block.
473	+	* Default is 'no' if nothing else is specified.
474	+	*/
475	+	ssl_connection_required = no;
476	+
477		/* class: the class the oper joins when they successfully /oper */
478		class = "opers";
479
480		/*
481	<	* umodes: default usermodes opers get when they /oper. If defined,
481	>	* umodes: the default usermodes opers get when they /oper. If defined,
482		* it will override oper_umodes settings in general {}.
483		* Available usermodes:
484		*
#	Line 474 | Line 492 | operator {
492		* +G - softcallerid - Server Side Ignore for users not on your channels
493		* +g - callerid     - Server Side Ignore (for privmsgs etc)
494		* +H - hidden       - Hides operator status to other users
495	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
478	<	*                     a channel
495	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
496		* +j - rej          - See rejected client notices
497		* +k - skill        - See server generated KILL messages
498		* +l - locops       - See LOCOPS messages
499		* +n - nchange      - See client nick changes
500	+	* +p - hidechans    - Hides channel list in WHOIS
501	+	* +q - hideidle     - Hides idle and signon time in WHOIS
502		* +R - nononreg     - Only receive private messages from registered clients
503		* +s - servnotice   - See general server notices
504		* +u - unauth       - See unauthorized client notices
505		* +w - wallop       - See server generated WALLOPS
506		* +y - spy          - See LINKS, STATS, TRACE notices etc.
488	–	* +z - operwall     - See oper generated WALLOPS
507		*/
508	<	umodes = locops, servnotice, operwall, wallop;
508	>	umodes = locops, servnotice, wallop;
509
510		/*
511	<	* privileges: controls the activities and commands an oper is
511	>	* privileges: controls the activities and commands an oper is
512		* allowed to do on the server. All options default to no.
513		* Available options:
514		*
#	Line 508 | Line 526 | operator {
526		* unkline        - allows UNKLINE                    | ('U' flag)
527		* gline          - allows GLINE                      | ('G' flag)
528		* xline          - allows XLINE                      | ('X' flag)
529	+	* unxline        - allows UNXLINE                    |
530		* locops         - allows LOCOPS                     |
531		* globops        - allows GLOBOPS                    |
532		* wallops        - allows WALLOPS                    |
514	–	* operwall       - allows OPERWALL                   | ('L' flag)
533		* rehash         - allows oper to REHASH config      | ('H' flag)
534		* die            - allows DIE                        | ('D' flag)
535		* restart        - allows RESTART                    |
#	Line 519 | Line 537 | operator {
537		* admin          - gives administrator privileges    | ('A' flag)
538		*/
539		flags = kill, kill:remote, connect, connect:remote, kline, unkline,
540	<	xline, globops, restart, die, rehash, admin, operwall, module;
540	>	xline, globops, restart, die, rehash, admin, module;
541		};
542
543		/*
544	<	* service {}: specifies what server may act as a network service
544	>	* service {}: specifies a server which may act as a network service
545		*
546	<	* NOTE: it is absolutely important that every single server on the network
546	>	* NOTE: it is very important that every server on the network
547		*       has the same service{} block.
548		*/
549		service {
#	Line 534 | Line 552 | service {
552		};
553
554		/*
555	<	* connect {}:  controls servers we connect to
555	>	* connect {}: define a server to connect to
556		*/
557		connect {
558		/* name: the name of the server */
559		name = "irc.uplink.com";
560
561		/*
562	<	* host: the host or IP to connect to. If a hostname is used it
563	<	* must match the reverse dns of the server.
562	>	* host: the host or IP address to connect to. If a hostname is used it
563	>	* must match the reverse DNS of the server.
564		*/
565		host = "192.168.0.1";
566
567		/*
568	<	* vhost: the IP to bind to when we connect outward to servers.
568	>	* vhost: the IP address to bind to when making outgoing connections to
569	>	* servers.
570		* serverinfo::vhost and serverinfo::vhost6 will be overridden
571		* by this directive.
572		*/
573		vhost = "192.168.0.2";
574
575		/*
576	<	* passwords: the passwords we send (OLD C:) and accept (OLD N:).
577	<	* The remote server will have these passwords reversed.
576	>	* passwords: the passwords to send (OLD C:) and accept (OLD N:).
577	>	* The remote server will have these passwords swapped.
578		*/
579		send_password = "password";
580		accept_password = "anotherpassword";
#	Line 588 | Line 607 | connect {
607		* ssl_cipher_list:
608		*
609		* List of ciphers that the server we are connecting to must support.
610	<	* If the server isn't capable of any cipher listed below, the
611	<	* connection will simply be rejected.
610	>	* If the server is not capable of using any of the ciphers listed below,
611	>	* the connection will simply be rejected.
612		* Can be used to enforce stronger ciphers, even though this option
613		* is not necessarily required to establish a SSL/TLS connection.
614		*
615		* Multiple ciphers are separated by colons. The order of preference
616		* is from left to right.
617		*/
618	<	#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
618	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
619	>
620	>	/*
621	>	* ssl_certificate_fingerprint: enhances security by additionally checking
622	>	* the server's client certificate fingerprint against the specified
623	>	* fingerprint below.
624	>	*/
625	>	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
626
627		/*
628		* autoconn   - controls whether we autoconnect to this server or not,
#	Line 627 | Line 653 | connect {
653		*/
654		cluster {
655		/*
656	<	* name: the server to share with, this can take wildcards
656	>	* name: the server to share with; this can take wildcards
657		*
658	<	* NOTE: only local actions will be clustered, meaning if
658	>	* NOTE: only local actions will be clustered, meaning that if
659		*       the server receives a shared kline/unkline/etc, it
660		*       will not be propagated to clustered servers.
661		*
#	Line 640 | Line 666 | cluster {
666		name = "*.arpa";
667
668		/*
669	<	* type: list of what to share, options are as follows:
669	>	* type: list of what to share; options are as follows:
670		*      dline   - share dlines
671		*      undline - share undlines
672		*      kline   - share klines
#	Line 658 | Line 684 | cluster {
684		/*
685		* shared {}: users that are allowed to remote kline
686		*
687	<	* NOTE: This can be effectively used for remote klines.
687	>	* NOTE: This can effectively be used for remote klines.
688		*       Please note that there is no password authentication
689		*       for users setting remote klines. You must also be
690		*       /oper'd in order to issue a remote kline.
691		*/
692		shared {
693		/*
694	<	* name: the server the user must be on to set klines. If this is not
695	<	* specified, the user will be allowed to kline from all servers.
694	>	* name: the server the user must be connected to in order to set klines.
695	>	* If this is not specified, the user will be allowed to kline from all
696	>	* servers.
697		*/
698		name = "irc2.some.server";
699
#	Line 703 | Line 730 | kill {
730		};
731
732		/*
733	<	* deny {}:  IPs that are not allowed to connect (before DNS/ident lookup)
733	>	* deny {}:  IP addresses that are not allowed to connect
734	>	* (before DNS/ident lookup)
735		* Oper issued dlines will be added to the specified dline config
736		*/
737		deny {
#	Line 712 | Line 740 | deny {
740		};
741
742		/*
743	<	* exempt {}:  IPs that are exempt from deny {} and Dlines
743	>	* exempt {}:  IP addresses that are exempt from deny {} and Dlines
744		*/
745		exempt {
746		ip = "192.168.0.0/16";
#	Line 722 | Line 750 | exempt {
750		* resv {}:  nicks and channels users may not use/join
751		*/
752		resv { mask = "clone*"; reason = "Clone bots"; };
753	+	resv { mask = "Global"; reason = "Reserved for services"; };
754		resv { mask = "ChanServ"; reason = "Reserved for services"; };
755		resv { mask = "NickServ"; reason = "Reserved for services"; };
756		resv { mask = "OperServ"; reason = "Reserved for services"; };
#	Line 735 | Line 764 | resv { mask = "#*services*"; reason = "R
764		resv {
765		/*
766		* mask: masks starting with a '#' are automatically considered
767	<	* as channel name mask.
767	>	* as channel name masks.
768		*/
769		mask = "#helsinki";
770	<	reason = "Channel is reserved for finnish inhabitants";
770	>	reason = "Channel is reserved for Finnish inhabitants";
771
772		/*
773		* exempt: can be either a ISO 3166 alpha-2 two letter country
#	Line 767 | Line 796 | gecos {
796		channel {
797		/*
798		* disable_fake_channels: this option, if set to 'yes', will
799	<	* disallow clients to create or join channels that have one
799	>	* disallow clients from creating or joining channels that have one
800		* of the following ASCII characters in their name:
801		*
802		*   2 | bold
#	Line 781 | Line 810 | channel {
810		disable_fake_channels = yes;
811
812		/*
813	<	* knock_delay: The amount of time a user must wait between issuing
814	<	* the knock command.
813	>	* invite_client_count, invite_client_time: how many INVITE commands
814	>	* are permitted per client per invite_client_time.
815	>	*/
816	>	invite_client_count = 10;
817	>	invite_client_time = 5 minutes;
818	>
819	>	/*
820	>	* knock_client_count, knock_client_time: how many KNOCK commands
821	>	* are permitted per client per knock_client_time.
822		*/
823	<	knock_delay = 5 minutes;
823	>	knock_client_count = 1;
824	>	knock_client_time = 5 minutes;
825
826		/*
827	<	* knock_delay_channel: How often a knock to any specific channel
828	<	* is permitted, regardless of the user sending the knock.
827	>	* knock_delay_channel: How often a KNOCK to any specific channel
828	>	* is permitted, regardless of the user sending the KNOCK.
829		*/
830		knock_delay_channel = 1 minute;
831
#	Line 808 | Line 845 | channel {
845		max_bans = 100;
846
847		/*
848	<	* how many joins in how many seconds constitute a flood, use 0 to
848	>	* how many joins in how many seconds constitute a flood. Use 0 to
849		* disable. +b opers will be notified (changeable via /set)
850		*/
851		join_flood_count = 16;
852		join_flood_time = 8 seconds;
853
854		/*
855	<	* splitcode: The ircd will now check splitmode every few seconds.
855	>	* The ircd will now check splitmode (whether a server is split from
856	>	* the network) every few seconds; this functionality is known as
857	>	* splitcode and is influenced by the options below.
858		*
859		* Either split users or split servers can activate splitmode, but
860		* both conditions must be met for the ircd to deactivate splitmode.
861	<	*
861	>	*
862		* You may force splitmode to be permanent by /quote set splitmode on
863		*/
864
#	Line 835 | Line 874 | channel {
874		*/
875		default_split_server_count = 0;
876
877	<	/* no_create_on_split: disallow users creating channels on split. */
877	>	/* no_create_on_split: do not allow users to create channels on split. */
878		no_create_on_split = yes;
879
880	<	/* no_join_on_split: disallow users joining channels at all on a split. */
880	>	/* no_join_on_split: do not allow users to join channels on a split. */
881		no_join_on_split = no;
882		};
883
884		/*
885		* serverhide {}:  The serverhide block contains the options regarding
886	<	* serverhiding
886	>	* to server hiding
887		*/
888		serverhide {
889		/*
890	<	* disable_remote_commands: disable users doing commands
890	>	* disable_remote_commands: disable users issuing commands
891		* on remote servers.
892		*/
893		disable_remote_commands = no;
894
895		/*
896		* flatten_links: this option will show all servers in /links appear
897	<	* that they are linked to this current server.
897	>	* as though they are linked to this current server.
898		*/
899		flatten_links = no;
900
#	Line 890 | Line 929 | serverhide {
929
930		/*
931		* hide_server_ips: If this is disabled, opers will be unable to see
932	<	* servers ips and will be shown a masked ip, admins will be shown the
933	<	* real ip.
932	>	* servers' IP addresses and will be shown a masked IP address; admins
933	>	* will be shown the real IP address.
934		*
935	<	* If this is enabled, nobody can see a servers ip. *This is a kludge*,
936	<	* it has the side effect of hiding the ips everywhere, including
937	<	* logfiles.
935	>	* If this is enabled, nobody can see a server's IP address.
936	>	* *This is a kludge*: it has the side effect of hiding the IP addresses
937	>	* everywhere, including logfiles.
938		*
939		* We recommend you leave this disabled, and just take care with who you
940		* give administrator privileges to.
#	Line 908 | Line 947 | serverhide {
947		* compiled in options in config.h
948		*/
949		general {
950	+	/*
951	+	* cycle_on_host_change: sends a fake QUIT/JOIN combination
952	+	* when services change the hostname of a specific client.
953	+	*/
954	+	cycle_on_host_change = yes;
955	+
956		/* services_name: servername of nick/channel services */
957		services_name = "service.someserver";
958
959		/* max_watch: maximum WATCH entries a client can have. */
960	<	max_watch = 60;
960	>	max_watch = 30;
961	>
962	>	/* max_accept: maximum allowed /accept's for +g usermode. */
963	>	max_accept = 30;
964
965	<	/* gline_enable: enable glines, network wide temp klines. */
965	>	/* gline_enable: enable glines (network-wide temporary klines). */
966		gline_enable = yes;
967
968		/*
#	Line 942 | Line 990 | general {
990		gline_min_cidr6 = 48;
991
992		/*
993	<	* Whether to automatically set mode +i on connecting users.
993	>	* invisible_on_connect: whether to automatically set mode +i on
994	>	* connecting users.
995		*/
996		invisible_on_connect = yes;
997
998		/*
999	<	* kill_chase_time_limit: maximum time from the nickname change that
1000	<	* still causes KILL automatically to switch for the current nick of
1001	<	* that user.
999	>	* kill_chase_time_limit: KILL chasing is a feature whereby a KILL
1000	>	* issued for a user who has recently changed nickname will be applied
1001	>	* automatically to the new nick. kill_chase_time_limit is the maximum
1002	>	* time following a nickname change that this chasing will apply.
1003		*/
1004	<	kill_chase_time_limit = 90 seconds;
1004	>	kill_chase_time_limit = 30 seconds;
1005
1006		/*
1007		* hide_spoof_ips: if disabled, opers will be allowed to see the real
1008	<	* IP of spoofed users in /trace etc. If this is defined they will be
1009	<	* shown a masked IP.
1008	>	* IP address of spoofed users in /trace etc. If this is defined they
1009	>	* will be shown a masked IP.
1010		*/
1011		hide_spoof_ips = yes;
1012
#	Line 982 | Line 1032 | general {
1032
1033		/*
1034		* default_floodcount: the default value of floodcount that is configurable
1035	<	* via /quote set floodcount. This is the amount of lines a user
1035	>	* via /quote set floodcount. This is the number of lines a user
1036		* may send to any other user/channel in one second.
1037		*/
1038		default_floodcount = 10;
1039
1040		/*
1041	<	* failed_oper_notice: send a notice to all opers on the server when
1041	>	* failed_oper_notice: send a notice to all opers on the server when
1042		* someone tries to OPER and uses the wrong password, host or ident.
1043		*/
1044		failed_oper_notice = yes;
1045
1046		/*
1047	<	* dots_in_ident: the amount of '.' characters permitted in an ident
1047	>	* dots_in_ident: the number of '.' characters permitted in an ident
1048		* reply before the user is rejected.
1049		*/
1050		dots_in_ident = 2;
1051
1052		/*
1053	<	* min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1054	<	* placed via the server. K-lines hand placed are exempt from limits.
1053	>	* min_nonwildcard: the minimum number of non-wildcard characters in
1054	>	* k/d/g lines placed via the server. K-lines hand-placed are exempt from
1055	>	* this limit.
1056		* Wildcard chars: '.', ':', '*', '?', '@', '!'
1057		*/
1058		min_nonwildcard = 4;
1059
1060		/*
1061	<	* min_nonwildcard_simple: the minimum non wildcard characters in
1062	<	* gecos bans. Wildcard chars: '*', '?'
1061	>	* min_nonwildcard_simple: the minimum number of non-wildcard characters
1062	>	* in gecos bans. Wildcard chars: '*', '?'
1063		*/
1064		min_nonwildcard_simple = 3;
1065
1015	–	/* max_accept: maximum allowed /accept's for +g usermode. */
1016	–	max_accept = 20;
1017	–
1066		/* anti_nick_flood: enable the nickflood control code. */
1067		anti_nick_flood = yes;
1068
1069	<	/* nick flood: the nick changes allowed in the specified period */
1069	>	/* nick flood: the number of nick changes allowed in the specified period */
1070		max_nick_time = 20 seconds;
1071		max_nick_changes = 5;
1072
#	Line 1029 | Line 1077 | general {
1077		anti_spam_exit_message_time = 5 minutes;
1078
1079		/*
1080	<	* ts delta: the time delta allowed between server clocks before
1081	<	* a warning is given, or before the link is dropped. All servers
1082	<	* should run ntpdate/rdate to keep clocks in sync
1080	>	* ts_warn_delta, ts_max_delta: the time delta allowed between server
1081	>	* clocks before a warning is given, or before the link is dropped.
1082	>	* All servers should run ntpdate/rdate to keep clocks in sync
1083		*/
1084	<	ts_warn_delta = 30 seconds;
1085	<	ts_max_delta = 5 minutes;
1084	>	ts_warn_delta = 10 seconds;
1085	>	ts_max_delta = 2 minutes;
1086
1087		/*
1088	<	* warn_no_nline: warn opers about servers that try to connect but
1089	<	* we don't have a connect {} block for. Twits with misconfigured
1090	<	* servers can get really annoying with this enabled.
1088	>	* warn_no_connect_block: warn opers about servers that try to connect
1089	>	* but for which we don't have a connect {} block. Twits with
1090	>	* misconfigured servers can become really annoying with this enabled.
1091		*/
1092	<	warn_no_nline = yes;
1092	>	warn_no_connect_block = yes;
1093
1094		/*
1095		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
#	Line 1051 | Line 1099 | general {
1099		*/
1100		stats_e_disabled = no;
1101
1102	<	/* stats_o_oper only: make stats o (opers) oper only */
1102	>	/* stats_o_oper_only: make stats o (opers) oper only */
1103		stats_o_oper_only = yes;
1104
1105		/* stats_P_oper_only: make stats P (ports) oper only */
1106		stats_P_oper_only = yes;
1107
1108	+	/* stats_u_oper_only: make stats u (uptime) oper only */
1109	+	stats_u_oper_only = no;
1110	+
1111		/*
1112	<	* stats i oper only: make stats i (auth {}) oper only. Set to:
1112	>	* stats_i_oper_only: make stats i (auth {}) oper only. Set to:
1113		*     yes    - show users no auth blocks, made oper only.
1114	<	*     masked - show users first matching auth block
1114	>	*     masked - show users the first matching auth block
1115		*     no     - show users all auth blocks.
1116		*/
1117		stats_i_oper_only = yes;
#	Line 1068 | Line 1119 | general {
1119		/*
1120		* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1121		*     yes    - show users no auth blocks, made oper only
1122	<	*     masked - show users first matching auth block
1122	>	*     masked - show users the first matching auth block
1123		*     no     - show users all auth blocks.
1124		*/
1125		stats_k_oper_only = yes;
#	Line 1086 | Line 1137 | general {
1137		opers_bypass_callerid = no;
1138
1139		/*
1140	<	* pace_wait_simple: time between use of less intensive commands
1141	<	* (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1140	>	* pace_wait_simple: minimum time required between use of less
1141	>	* intensive commands
1142	>	* (ADMIN, HELP, LUSERS, VERSION, remote WHOIS)
1143		*/
1144		pace_wait_simple = 1 second;
1145
1146		/*
1147	<	* pace_wait: time between more intensive commands
1148	<	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1147	>	* pace_wait: minimum time required between use of more intensive commands
1148	>	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, WHOWAS)
1149		*/
1150		pace_wait = 10 seconds;
1151
1152		/*
1153	<	* short_motd: send clients a notice telling them to read the motd
1154	<	* instead of forcing a motd to clients who may simply ignore it.
1153	>	* short_motd: send clients a notice telling them to read the MOTD
1154	>	* instead of forcing an MOTD to clients who may simply ignore it.
1155		*/
1156		short_motd = no;
1157
#	Line 1121 | Line 1173 | general {
1173		/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1174		oper_pass_resv = yes;
1175
1176	<	/* REMOVE ME.  The following line checks you've been reading. */
1176	>	/* REMOVE ME. The following line checks that you have been reading. */
1177		havent_read_conf = 1;
1178
1179		/*
1180	<	* max_targets: the maximum amount of targets in a single
1180	>	* max_targets: the maximum number of targets in a single
1181		* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1182		*/
1183		max_targets = 4;
#	Line 1143 | Line 1195 | general {
1195		* +G - softcallerid - Server Side Ignore for users not on your channels
1196		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1197		* +H - hidden       - Hides operator status to other users
1198	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
1147	<	*                     a channel
1198	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
1199		* +j - rej          - See rejected client notices
1200		* +k - skill        - See server generated KILL messages
1201		* +l - locops       - See LOCOPS messages
1202		* +n - nchange      - See client nick changes
1203	+	* +p - hidechans    - Hides channel list in WHOIS
1204	+	* +q - hideidle     - Hides idle and signon time in WHOIS
1205		* +R - nononreg     - Only receive private messages from registered clients
1206		* +s - servnotice   - See general server notices
1207		* +u - unauth       - See unauthorized client notices
1208		* +w - wallop       - See server generated WALLOPS
1209		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1157	–	* +z - operwall     - See oper generated WALLOPS
1210		*/
1211
1212		/* oper_only_umodes: usermodes only opers may set */
1213		oper_only_umodes = bots, cconn, debug, full, hidden, skill,
1214	<	nchange, rej, spy, external, operwall,
1215	<	locops, unauth, farconnect;
1214	>	nchange, rej, spy, external,
1215	>	locops, unauth, farconnect;
1216
1217		/* oper_umodes: default usermodes opers get when they /oper */
1218	<	oper_umodes = bots, locops, servnotice, operwall, wallop;
1218	>	oper_umodes = bots, locops, servnotice, wallop;
1219
1220		/*
1221		* use_egd: if your system does not have *random devices yet you
#	Line 1178 | Line 1230 | general {
1230		*/
1231		#       egdpool_path = "/var/run/egd-pool";
1232
1233	+
1234		/*
1235	<	* throttle_time: the minimum amount of time between connections from
1236	<	* the same ip. exempt {} blocks are excluded from this throttling.
1235	>	* throttle_count: the maximum number of connections from the same
1236	>	* IP address allowed in throttle_time duration.
1237	>	*/
1238	>	throttle_count = 1;
1239	>
1240	>	/*
1241	>	* throttle_time: the minimum amount of time required between
1242	>	* connections from the same IP address. exempt {} blocks are
1243	>	* excluded from this throttling.
1244		* Offers protection against flooders who reconnect quickly.
1245		* Set to 0 to disable.
1246		*/
1247	<	throttle_time = 10;
1247	>	throttle_time = 2 seconds;
1248		};
1249
1250		modules {
#	Line 1242 | Line 1302 | log {
1302		size = 50 megabytes;
1303		};
1304
1305	+	file {
1306	+	type = xline;
1307	+	name = "/usr/local/ircd/var/log/xline.log";
1308	+	size = 50 megabytes;
1309	+	};
1310	+
1311	+	file {
1312	+	type = resv;
1313	+	name = "/usr/local/ircd/var/log/resv.log";
1314	+	size = 50 megabytes;
1315	+	};
1316	+
1317		file {
1318		type = debug;
1319		name = "/usr/local/ircd/var/log/debug.log";

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)