ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/doc/reference.conf

Comparing ircd-hybrid/trunk/doc/reference.conf (file contents):
Revision 2150 by michael, Fri May 31 18:39:43 2013 UTC vs.
Revision 7766 by michael, Fri Oct 7 16:27:37 2016 UTC

#	Line 1 | Line 1
1	<	/* ircd-hybrid reference configuration file
2	<	* Copyright (C) 2000-2013 Hybrid Development Team
1	>	/*
2	>	* This is an example configuration file for ircd-hybrid
3		*
4	<	* Written by ejb, wcampbel, db, leeh and others
4	>	* Copyright (c) 1997-2016 ircd-hybrid development team
5		*
6		* $Id$
7		*/
8
9		/*
10		* ########################################################################
11	<	* IMPORTANT NOTES:
11	>	* IMPORTANT NOTE:
12		*
13	<	* auth {} blocks MUST be specified in order of precedence.  The first one
14	<	* that matches a user will be used.  So place spoofs first, then specials,
13	>	* auth {} blocks MUST be specified in order of precedence. The first one
14	>	* that matches a user will be used. So place spoofs first, then specials,
15		* then general access.
16		* ########################################################################
17		*
#	Line 23 | Line 23
23		*
24		* Times/durations are written as:
25		*        12 hours 30 minutes 1 second
26	<	*
26	>	*
27		* Valid units of time:
28		*        year, month, week, day, hour, minute, second
29		*
30		* Valid units of size:
31		*        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
32		*
33	<	* Sizes and times may be singular or plural.
34	<	*/
33	>	* Sizes and times may be singular or plural.
34	>	*/
35
36
37		/*
#	Line 39 | Line 39
39		*/
40		serverinfo {
41		/*
42	<	* name: the name of this server.  This cannot be changed at runtime.
42	>	* name: the name of this server. This cannot be changed at runtime.
43		*/
44	<	name = "hades.arpa";
44	>	name = "server.example.net";
45
46		/*
47	<	* sid: a server's unique ID.  This is three characters long and must
48	<	* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
47	>	* sid: a server's unique ID. This is three characters long and must
48	>	* be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	+	*
51		* NOTE: The letters must be capitalized. This cannot be changed at runtime.
52	+	*
53	+	* A sid is automatically generated at runtime, if you want to configure
54	+	* a specific sid, uncomment the following line.
55		*/
56	<	sid = "0HY";
56	>	#       sid = "0HY";
57
58		/*
59		* description: the description of the server.
#	Line 57 | Line 61 | serverinfo {
61		description = "ircd-hybrid test server";
62
63		/*
64	<	* network info: the name and description of the network this server
65	<	* is on. Shown in the 005 reply and used with serverhiding.
64	>	* network_name, network_desc: the name and description of the network this
65	>	* server is on. Shown in the 005 reply and used with serverhiding.
66		*/
67		network_name = "MyNet";
68		network_desc = "This is My Network";
#	Line 70 | Line 74 | serverinfo {
74		hub = no;
75
76		/*
77	<	* vhost: the IP to bind to when we connect outward to ipv4 servers.
78	<	* This should be an ipv4 IP only, or "*" for INADDR_ANY.
77	>	* vhost: the IP address to bind to when connecting outward to IPv4 servers.
78	>	* This should be an IPv4 address, or "*" for INADDR_ANY.
79		*/
80	<	#vhost = "192.169.0.1";
80	>	#       vhost = "192.0.2.1";
81
82		/*
83	<	* vhost6: the IP to bind to when we connect outward to ipv6 servers.
84	<	* This should be an ipv6 IP only, or "*" for INADDR_ANY.
83	>	* vhost6: the IP address to bind to when connecting outward to IPv6 servers.
84	>	* This should be an IPv6 address, or "*" for in6addr_any.
85		*/
86	<	#vhost6 = "3ffe:80e8:546::2";
86	>	#       vhost6 = "2001:DB8::1";
87
88	<	/* max_clients: the maximum number of clients allowed to connect. */
89	<	max_clients = 512;
88	>	/*
89	>	* default_max_clients: the default maximum number of clients allowed
90	>	* to connect. This can be changed from within IRC via /QUOTE SET MAX.
91	>	*/
92	>	default_max_clients = 512;
93
94		/*
95		* max_nick_length: only applies to local clients. Must be in the
#	Line 98 | Line 105 | serverinfo {
105		max_topic_length = 160;
106
107		/*
108	<	* rsa_private_key_file: the path to the file containing our
109	<	* rsa key for cryptlink.
108	>	* libgeoip_database_options: used to control the libGeoIP database handling.
109	>	*
110	>	* Available options:
111	>	*
112	>	* standard     - Read database from file system. This uses the least memory.
113	>	* memory_cache - Load database into memory. Provides faster performance but
114	>	*                uses more memory.
115	>	* mmap_cache   - Load database into mmap shared memory.
116	>	* check_cache  - Check for updated database. If database has been updated,
117	>	*                reload file handle and/or memory cache.
118	>	*/
119	>	#       libgeoip_database_options = memory_cache, check_cache;
120	>
121	>	/*
122	>	* libgeoip_ipv4_database_file: the path to the GeoIP IPv4 database file.
123	>	*/
124	>	#       libgeoip_ipv4_database_file = "etc/GeoIP.dat";
125	>
126	>	/*
127	>	* libgeoip_ipv6_database_file: the path to the GeoIP IPv6 database file.
128	>	*/
129	>	#       libgeoip_ipv6_database_file = "etc/GeoIPv6.dat";
130	>
131	>	/*
132	>	* rsa_private_key_file: the path to the file containing the RSA key.
133		*
134	<	* Example command to store a 2048 bit RSA keypair in
135	<	* rsa.key, and the public key in rsa.pub:
136	<	*
137	<	*      openssl genrsa -out rsa.key 2048
138	<	*      openssl rsa -in rsa.key -pubout -out rsa.pub
139	<	*      chown <ircd-user>.<ircd.group> rsa.key rsa.pub
140	<	*      chmod 0600 rsa.key
141	<	*      chmod 0644 rsa.pub
134	>	* Example commands to store a 2048 bit RSA key in rsa.key:
135	>	*
136	>	* OpenSSL/LibreSSL:
137	>	*    openssl genrsa -out rsa.key 2048
138	>	*
139	>	* GnuTLS:
140	>	*    certtool --generate-privkey --sec-param=medium --outfile rsa.key
141	>	*
142	>	* Once the RSA key is generated, it is highly recommended to lock down
143	>	* its file permissions:
144	>	*
145	>	*    chown <ircd-user>.<ircd.group> rsa.key
146	>	*    chmod 0600 rsa.key
147		*/
148	<	#rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
148	>	#       rsa_private_key_file = "etc/rsa.key";
149
150		/*
151		* ssl_certificate_file: the path to the file containing our
152	<	* ssl certificate for encrypted client connection.
152	>	* SSL certificate for encrypted client connection.
153		*
154		* This assumes your private RSA key is stored in rsa.key. You
155		* MUST have an RSA key in order to generate the certificate.
156		*
157		* Example command:
158		*
159	<	*      openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
160	<	*
126	<	* See http://www.openssl.org/docs/HOWTO/certificates.txt
159	>	* OpenSSL/LibreSSL:
160	>	*    openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
161		*
162	<	* Please use the following values when generating the cert
163	<	*
130	<	*      Organization Name: Network Name
131	<	*      Organization Unit Name: changme.someirc.net
132	<	*      Common Name: irc.someirc.net
133	<	*      E-mail: you@domain.com
162	>	* GnuTLS:
163	>	*    certtool --generate-self-signed --load-privkey rsa.key --outfile cert.pem
164		*/
165	<	#ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
165	>	#       ssl_certificate_file = "etc/cert.pem";
166
167		/*
168	<	* ssl_dh_param_file:
169	<	*
170	<	* Path to the PEM encoded Diffie-Hellman parameter file.
141	<	* DH parameters are strictly required when using ciphers
142	<	* with EDH (ephemeral Diffie-Hellman) key exchange.
168	>	* ssl_dh_param_file: the path to the PEM encoded Diffie-Hellman
169	>	* parameter file. DH parameters are required when using
170	>	* ciphers with EDH (ephemeral Diffie-Hellman) key exchange.
171		*
172		* A DH parameter file can be created by running:
173		*
174	<	*      openssl dhparam -out dhparam.pem 1024
174	>	* OpenSSL/LibreSSL:
175	>	*    openssl dhparam -out dhparam.pem 2048
176		*
177	<	* Prime size must be at least 1024 bits. Further information
178	<	* regarding specific OpenSSL dhparam command-line options
150	<	* can be found in the OpenSSL manual.
177	>	* GnuTLS:
178	>	*    certtool --generate-dh-params --sec-param=medium --outfile dhparam.pem
179		*/
180	<	#ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
180	>	#       ssl_dh_param_file = "etc/dhparam.pem";
181
182		/*
183	<	* ssl_cipher_list:
183	>	* ssl_dh_elliptic_curve: defines the curve to use for the
184	>	* Elliptic Curve Diffie-Hellman (ECDH) algorithm.
185	>	* Default is ANSI X9.62 prime256v1/secp256r1 if nothing else is specified.
186	>	*
187	>	* A list of curves supported by OpenSSL can be obtained by running:
188		*
189	<	* List of ciphers that are supported by _this_ server. Can be used to
190	<	* enforce specific ciphers for incoming SSL/TLS connections.
191	<	* If a client (which also includes incoming server connections) isn't
192	<	* capable of any cipher listed below, the connection will simply be
193	<	* rejected.
189	>	*    openssl ecparam -list_curves
190	>	*
191	>	* This directive currently doesn't do anything with GnuTLS support.
192	>	*/
193	>	#       ssl_dh_elliptic_curve = "secp521r1";
194	>
195	>	/*
196	>	* ssl_cipher_list: list of ciphers to support on _this_ server.
197	>	* Can be used to enforce specific ciphers for incoming SSL/TLS
198	>	* connections. If a client (which also includes incoming server
199	>	* connections) is not capable of using any of the ciphers listed
200	>	* here, the connection will simply be rejected.
201		*
202		* A list of supported ciphers can be obtained by running:
203		*
204	<	*      openssl ciphers -ssl3 -tls1 -v
204	>	* OpenSSL/LibreSSL:
205	>	*    openssl ciphers -tls1 -v
206	>	*
207	>	* GnuTLS:
208	>	*    gnutls-cli --list
209		*
210		* Multiple ciphers are separated by colons. The order of preference is
211		* from left to right.
212		*/
213	<	#ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
213	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
214
215		/*
216	<	* ssl_server_method:
217	<	* ssl_client_method:
216	>	* ssl_message_digest_algorithm: defines which cryptographic hash function
217	>	* to use for generating fingerprint hashes of X.509 certificates.
218	>	* Default is SHA-256 if nothing else is specified.
219	>	*
220	>	* A list of supported message digest algorithms can be obtained by running:
221	>	*
222	>	* OpenSSL/LibreSSL:
223	>	*    openssl list-message-digest-algorithms
224		*
225	<	* SSL/TLS methods we provide for incoming (server method) and
226	<	* outgoing (client method) SSL/TLS connections.
178	<	* This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
225	>	* GnuTLS:
226	>	*    gnutls-cli --list
227		*/
228	<	#ssl_server_method = tlsv1, sslv3;
181	<	#ssl_client_method = tlsv1;
228	>	#       ssl_message_digest_algorithm = "sha256";
229		};
230
231		/*
232	<	* admin {}:  contains admin information about the server
232	>	* admin {}:  contains administrative information about the server
233		*/
234		admin {
235		name = "Smurf target";
236		description = "Main Server Administrator";
237	<	email = "<syn@packets.r.us>";
237	>	email = "<admin@server.example.net>";
238		};
239
240		/*
#	Line 205 | Line 252 | class {
252
253		/*
254		* number_per_ip: how many local users are allowed to connect
255	<	* from one IP  (optional)
255	>	* from a single IP address (optional)
256		*/
257		number_per_ip = 2;
258
259		/*
260		* max_local: how many local users are allowed to connect
261	<	* from one ident@host  (optional)
261	>	* from a single ident@host (optional)
262		*/
263		max_local = 2;
264
265		/*
266	<	* max_global: network-wide limit of users per ident@host  (optional)
266	>	* max_global: network-wide limit of users per ident@host (optional)
267		*/
268		max_global = 10;
269
#	Line 226 | Line 273 | class {
273		max_number = 100;
274
275		/*
276	<	* the following lines are optional and allow you to define
276	>	* The following lines are optional and allow you to define
277		* how many users can connect from one /NN subnet.
278		*/
279		cidr_bitlen_ipv4 = 24;
#	Line 234 | Line 281 | class {
281		number_per_cidr = 16;
282
283		/*
284	<	* sendq: the amount of data allowed in a clients send queue before
284	>	* sendq: the amount of data allowed in a client's send queue before
285		* they are dropped.
286		*/
287		sendq = 100 kbytes;
288
289		/*
290	<	* recvq: maximum amount of data in a clients receive queue before
291	<	* they are dropped for flooding. Defaults to 2560 if the chosen
292	<	* value isn't within the range of 512 to 8000.
290	>	* recvq: the amount of data allowed in a client's receive queue before
291	>	* they are dropped for flooding. Defaults to 2560 if the chosen value
292	>	* isn't within the range of 512 to 8000.
293		*/
294		recvq = 2560 bytes;
295		};
#	Line 255 | Line 302 | class {
302		sendq = 100 kbytes;
303
304		/*
305	<	* min_idle: minimum idle time that is shown in /whois.
305	>	* max_channels: maximum number of channels users in this class can join.
306	>	*/
307	>	max_channels = 60;
308	>
309	>	/*
310	>	* min_idle: minimum idle time that is shown in WHOIS.
311		*/
312		min_idle = 3 hours;
313
314		/*
315	<	* max_idle: maximum idle time that is shown in /whois.
315	>	* max_idle: maximum idle time that is shown in WHOIS.
316		*/
317		max_idle = 8 hours;
318
319		/*
320		* flags:
321		*
322	<	* random_idle          - idle time is randomly selected within the
323	<	*                        range of min_idle to max_idle
324	<	* hide_idle_from_opers - fake idle time will be shown to operators, too
322	>	* random_idle          - a fake idle time is set randomly between
323	>	*                        min_idle and max_idle
324	>	* hide_idle_from_opers - the fake idle time will also be shown to operators
325		*/
326		flags = random_idle, hide_idle_from_opers;
327		};
#	Line 284 | Line 336 | class {
336		*/
337		connectfreq = 5 minutes;
338
339	<	/* max number: the amount of servers to autoconnect to. */
339	>	/* max number: the number of servers to autoconnect to. */
340		max_number = 1;
341
342		/* sendq: servers need a higher sendq as they send more data. */
#	Line 292 | Line 344 | class {
344		};
345
346		/*
347	<	* motd {}: specifies various MOTD files. Applies to local users only.
347	>	* motd {}: Allows the display of a different MOTD to a client
348	>	* depending on its origin. Applies to local users only.
349		*/
350		motd {
351		/*
352		* mask: multiple mask entries are permitted. Mask can either be
353	<	* a class name or a hostname.
353	>	* a class name or a hostname. CIDR is supported.
354		*/
355		mask = "*.at";
356		mask = "*.de";
357		mask = "*.ch";
358
359		/*
360	<	* file: path top the actual motd file.
360	>	* file: path to the motd file.
361		*/
362	<	file = "/usr/local/ircd/etc/german.motd";
362	>	file = "etc/german.motd";
363		};
364
365		/*
#	Line 314 | Line 367 | motd {
367		*/
368		listen {
369		/*
370	<	* port: the specific port to listen on. If no host is specified
371	<	* before, it will listen on all available IPs.
370	>	* port: the port to listen on. If no host is specified earlier in the
371	>	* listen {} block, it will listen on all available IP addresses.
372		*
373	<	* Ports are separated via a comma, a range may be specified using ".."
373	>	* Ports are separated by commas; a range may be specified using ".."
374		*/
375	<
376	<	/* port: listen on all available IPs, ports 6665 to 6669 */
375	>
376	>	/* port: listen on all available IP addresses, ports 6665 to 6669. */
377		port = 6665 .. 6669;
378
379		/*
380	<	* Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
380	>	* Listen on 192.0.2.2/6697 with SSL enabled and hidden from STATS P
381		* unless you are an administrator.
382		*
383	<	* NOTE: The "flags" directive has to come before "port". Always!
383	>	* NOTE: The "flags" directive always has to come before "port".
384		*
385		* Currently available flags are:
386		*
#	Line 336 | Line 389 | listen {
389		*  hidden - Port is hidden from /stats P, unless you're an admin
390		*/
391		flags = hidden, ssl;
392	<	host = "192.168.0.1";
392	>	host = "192.0.2.2";
393		port = 6697;
394
395		/*
396	<	* host: set a specific IP/host the ports after the line will listen
397	<	* on. This may be ipv4 or ipv6.
396	>	* host: set a specific IP address to listen on using the
397	>	* subsequent port definitions. This may be IPv4 or IPv6.
398		*/
399	<	host = "1.2.3.4";
399	>	host = "192.0.2.3";
400		port = 7000, 7001;
401
402	<	host = "3ffe:1234:a:b:c::d";
402	>	host = "2001:DB8::2";
403		port = 7002;
404		};
405
#	Line 356 | Line 409 | listen {
409		auth {
410		/*
411		* user: the user@host allowed to connect. Multiple user
412	<	* lines are permitted per auth block.
412	>	* lines are permitted within each auth {} block.
413		*/
414	<	user = "*@172.16.0.0/12";
415	<	user = "*test@123D:B567:*";
414	>	user = "*@192.0.2.0/24";
415	>	user = "*test@2001:DB8:*";
416
417	<	/* password: an optional password that is required to use this block */
417	>	/* password: an optional password that is required to use this block. */
418		password = "letmein";
419
420		/*
421	<	* encrypted: controls whether the auth password above has been
422	<	* encrypted.
421	>	* encrypted: indicates whether the auth password above has been
422	>	* encrypted. Default is 'no' if nothing else is specified.
423		*/
424		encrypted = yes;
425
426		/*
427	<	* spoof: fake the users host to this. This is free-form, just do
427	>	* spoof: fake the user's host to this. This is free-form; just do
428		* everyone a favor and don't abuse it. ('=' prefix on /stats I)
429		*/
430		spoof = "I.still.hate.packets";
431
432	<	/* class: the class the user is placed in */
432	>	/* class: the class the user is placed in. */
433		class = "opers";
434
435		/*
436	<	* need_password - don't allow users who haven't supplied the correct
437	<	*                 password to connect using another auth{} block
438	<	*                 ('&' prefix on /stats I if disabled)
386	<	* need_ident    - require the user to have identd to connect ('+' prefix on /stats I)
436	>	* need_password - don't allow users who haven't supplied the correct  | ('&' prefix on /stats I if disabled)
437	>	*                 password to connect using another auth {} block
438	>	* need_ident    - require the user to have identd to connect          | ('+' prefix on /stats I)
439		* spoof_notice  - enable spoofing notification to admins
440	<	* exceed_limit  - allow a user to exceed class limits ('>' prefix on /stats I)
441	<	* kline_exempt  - exempt this user from k/glines ('^' prefix on /stats I)
442	<	* gline_exempt  - exempt this user from glines ('_' prefix on /stats I)
443	<	* resv_exempt   - exempt this user from resvs ('$' prefix on /stats I)
444	<	* no_tilde      - remove ~ from a user with no ident ('-' prefix on /stats I)
445	<	* can_flood     - allow this user to exceed flood limits ('|' prefix on /stats I)
446	<	* webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
447	<	*                 ('<' prefix on /stats I)
440	>	* exceed_limit  - allow a user to exceed class limits                 | ('>' prefix on /stats I)
441	>	* kline_exempt  - exempt this user from k-lines                       | ('^' prefix on /stats I)
442	>	* xline_exempt  - exempt this user from x-lines                       | ('!' prefix on /stats I)
443	>	* resv_exempt   - exempt this user from resvs                         | ('$' prefix on /stats I)
444	>	* no_tilde      - remove ~ from a user with no ident                  | ('-' prefix on /stats I)
445	>	* can_flood     - allow this user to exceed flood limits              | ('|' prefix on /stats I)
446	>	* webirc        - enables WEBIRC authentication for web-based         | ('<' prefix on /stats I)
447	>	*                 clients such as Mibbit
448		*/
449		flags = need_password, spoof_notice, exceed_limit, kline_exempt,
450	<	gline_exempt, resv_exempt, no_tilde, can_flood;
450	>	xline_exempt, resv_exempt, no_tilde, can_flood;
451		};
452
453		auth {
454		/*
455	<	* redirect: the server and port to redirect a user to. A user does not
456	<	* have to obey the redirection, the ircd just suggests an alternative
457	<	* server for them.
455	>	* redirserv, redirport: the server and port to redirect a user to.
456	>	* A user does not have to obey the redirection; the ircd just
457	>	* suggests an alternative server for them.
458		*/
459	<	redirserv = "this.is.not.a.real.server";
459	>	redirserv = "server2.example.net";
460		redirport = 6667;
409	–
410	–	user = "*.server";
461
462	<	/* class: a class is required even though it is not used */
462	>	user = "*@*.ch";
463	>
464	>	/* class: a class is required even though it is not used. */
465		class = "users";
466		};
467
#	Line 423 | Line 475 | auth {
475		* operator {}:  defines ircd operators
476		*/
477		operator {
478	<	/* name: the name of the oper */
478	>	/* name: the name of the operator */
479		name = "sheep";
480
481		/*
482	<	* user: the user@host required for this operator. Multiple
483	<	* user="" lines are supported.
482	>	* user: the user@host required for this operator. Multiple user
483	>	* lines are permitted within each operator {} block.
484		*/
485	<	user = "*sheep@192.168.0.0/16";
486	<	user = "*@127.0.0.0/8";
485	>	user = "*sheep@192.0.2.0/26";
486	>	user = "*@192.0.2.240/28";
487
488		/*
489	<	* password: the password required to oper. By default this will
490	<	* need to be encrypted by using the provided mkpasswd tool.
491	<	* Several password hash algorithms are available depending
492	<	* on your system's crypt() implementation. For example, a modern
441	<	* glibc already has support for SHA-256/512, and MD5 encryption
442	<	* algorithms.
489	>	* password: the password required to oper. By default this will need
490	>	* to be encrypted using the provided mkpasswd tool.
491	>	* The availability of various password hashing algorithms may vary
492	>	* depending on the system's crypt(3) implementation.
493		*/
494		password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
495
496		/*
497	<	* encrypted: controls whether the oper password above has been
498	<	* encrypted.
497	>	* encrypted: indicates whether the oper password above has been
498	>	* encrypted. Default is 'yes' if nothing else is specified.
499		*/
500		encrypted = yes;
501
502		/*
503	<	* rsa_public_key_file: the public key for this oper when using Challenge.
504	<	* A password should not be defined when this is used, see
505	<	* doc/challenge.txt for more information.
503	>	* ssl_certificate_fingerprint: enhances security by additionally checking
504	>	* the oper's client certificate fingerprint against the specified
505	>	* fingerprint below.
506	>	*
507	>	* Hint: your users can use the following commands to obtain a SHA-256 hash
508	>	* of their ssl certificate:
509	>	*
510	>	* OpenSSL/LibreSSL:
511	>	*    openssl x509 -sha256 -noout -fingerprint -in cert.pem | sed -e 's/^.*=//;s/://g'
512	>	*
513	>	* GnuTLS:
514	>	*    certtool -i < cert.pem | egrep -A 1 'SHA256 fingerprint'
515	>	*/
516	>	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
517	>
518	>	/*
519	>	* ssl_connection_required: client must be connected over SSL/TLS
520	>	* in order to be able to use this operator {} block.
521	>	* Default is 'no' if nothing else is specified.
522		*/
523	<	#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
523	>	ssl_connection_required = no;
524
525	<	/* class: the class the oper joins when they successfully /oper */
525	>	/* class: the class the oper joins when they successfully OPER. */
526		class = "opers";
527
528		/*
529	<	* umodes: default usermodes opers get when they /oper. If defined,
530	<	* it will override oper_umodes settings in general {}.
531	<	* Available usermodes:
529	>	* whois: allows overriding the default RPL_WHOISOPERATOR numeric
530	>	* string shown in WHOIS.
531	>	* This string is propagated to all servers on the network.
532	>	*/
533	>	#       whois = "is a Smurf Target (IRC Operator)";
534	>
535	>	/*
536	>	* umodes: the default user modes opers get when they successfully OPER.
537	>	* If defined, it will override oper_umodes settings in general {}.
538	>	* Available user modes:
539		*
540		* +b - bots         - See bot and drone flooding notices
541		* +c - cconn        - Client connection/quit notices
469	–	* +C - cconn_full   - Client connection/quit notices full
542		* +D - deaf         - Don't receive channel messages
543		* +d - debug        - See debugging notices
544		* +e - external     - See remote server connection and split notices
545		* +F - farconnect   - Remote client connection/quit notices
546	<	* +f - full         - See auth{} block full notices
546	>	* +f - full         - See auth {} block full notices
547		* +G - softcallerid - Server Side Ignore for users not on your channels
548		* +g - callerid     - Server Side Ignore (for privmsgs etc)
549	<	* +H - hidden       - Hides operator status to other users
550	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
479	<	*                     a channel
549	>	* +H - hidden       - Hides IRC operator status to other users
550	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
551		* +j - rej          - See rejected client notices
552		* +k - skill        - See server generated KILL messages
553		* +l - locops       - See LOCOPS messages
554		* +n - nchange      - See client nick changes
555	+	* +p - hidechans    - Hides channel list in WHOIS
556	+	* +q - hideidle     - Hides idle and signon time in WHOIS
557		* +R - nononreg     - Only receive private messages from registered clients
558		* +s - servnotice   - See general server notices
559		* +u - unauth       - See unauthorized client notices
560		* +w - wallop       - See server generated WALLOPS
561		* +y - spy          - See LINKS, STATS, TRACE notices etc.
489	–	* +z - operwall     - See oper generated WALLOPS
562		*/
563	<	#       umodes = locops, servnotice, operwall, wallop;
563	>	umodes = locops, servnotice, wallop;
564
565		/*
566	<	* privileges: controls the activities and commands an oper is
567	<	* allowed to do on the server. All options default to no.
568	<	* Available options:
569	<	*
570	<	* module         - allows MODULE
571	<	* connect        - allows local CONNECT              | ('P' flag)
572	<	* connect:remote - allows remote CONNECT             | ('Q' flag)
573	<	* squit          - allows local SQUIT                | ('R' flag)
574	<	* squit:remote   - allows remote SQUIT               | ('S' flag)
575	<	* kill           - allows to KILL local clients      | ('N' flag)
576	<	* kill:remote    - allows remote users to be /KILL'd | ('O' flag)
577	<	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
578	<	* dline          - allows DLINE                      |
579	<	* undline        - allows UNDLINE                    |
580	<	* kline          - allows KLINE                      | ('K' flag)
581	<	* unkline        - allows UNKLINE                    | ('U' flag)
582	<	* gline          - allows GLINE                      | ('G' flag)
583	<	* xline          - allows XLINE                      | ('X' flag)
584	<	* locops         - allows LOCOPS                     |
585	<	* globops        - allows GLOBOPS                    |
586	<	* wallops        - allows WALLOPS                    |
587	<	* operwall       - allows OPERWALL                   | ('L' flag)
588	<	* rehash         - allows oper to REHASH config      | ('H' flag)
589	<	* die            - allows DIE                        | ('D' flag)
590	<	* restart        - allows RESTART                    |
591	<	* set            - allows SET                        |
592	<	* admin          - gives administrator privileges    | ('A' flag)
566	>	* flags: controls the activities and commands an oper is
567	>	* allowed to do on the server. All flags default to 'no'.
568	>	* Available flags:
569	>	*
570	>	* admin          - gives administrator privileges        | ('A' flag)
571	>	* close          - allows CLOSE                          | ('B' flag)
572	>	* connect        - allows local CONNECT                  | ('C' flag)
573	>	* connect:remote - allows remote CONNECT                 | ('D' flag)
574	>	* die            - allows DIE                            | ('E' flag)
575	>	* dline          - allows DLINE                          | ('F' flag)
576	>	* globops        - allows GLOBOPS                        | ('G' flag)
577	>	* join:resv      - allows to JOIN resv {} channels       | ('H' flag)
578	>	* kill           - allows to KILL local clients          | ('I' flag)
579	>	* kill:remote    - allows remote users to be /KILL'd     | ('J' flag)
580	>	* kline          - allows KLINE                          | ('K' flag)
581	>	* locops         - allows LOCOPS                         | ('L' flag)
582	>	* module         - allows MODULE                         | ('M' flag)
583	>	* nick:resv      - allows to use NICK on resv {} nicks   | ('N' flag)
584	>	* opme           - allows OPME                           | ('O' flag)
585	>	* rehash         - allows oper to REHASH config          | ('P' flag)
586	>	* rehash:remote  - allows oper to remotely REHASH config | ('Q' flag)
587	>	* remoteban      - allows remote KLINE/UNKLINE           | ('R' flag)
588	>	* restart        - allows RESTART                        | ('S' flag)
589	>	* resv           - allows RESV                           | ('T' flag)
590	>	* set            - allows SET                            | ('U' flag)
591	>	* squit          - allows local SQUIT                    | ('V' flag)
592	>	* squit:remote   - allows remote SQUIT                   | ('W' flag)
593	>	* undline        - allows UNDLINE                        | ('X' flag)
594	>	* unkline        - allows UNKLINE                        | ('Y' flag)
595	>	* unresv         - allows UNRESV                         | ('Z' flag)
596	>	* unxline        - allows UNXLINE                        | ('a' flag)
597	>	* wallops        - allows WALLOPS                        | ('b' flag)
598	>	* xline          - allows XLINE                          | ('c' flag)
599		*/
600	<	flags = kill, kill:remote, connect, connect:remote, kline, unkline,
601	<	xline, globops, restart, die, rehash, admin, operwall, module;
524	<	};
525	<
526	<	/*
527	<	* service {}: specifies what server may act as a network service
528	<	*
529	<	* NOTE: it is absolutely important that every single server on the network
530	<	*       has the same service{} block.
531	<	*/
532	<	service {
533	<	name = "service.someserver";
534	<	name = "stats.someserver";
600	>	flags = admin, connect, connect:remote, die, globops, kill, kill:remote,
601	>	kline, module, rehash, restart, set, unkline, unxline, xline;
602		};
603
604		/*
605	<	* connect {}:  controls servers we connect to
605	>	* connect {}: define a server to connect to
606		*/
607		connect {
608	<	/* name: the name of the server */
609	<	name = "irc.uplink.com";
608	>	/* name: the name of the server. */
609	>	name = "uplink.example.net";
610
611		/*
612	<	* host: the host or IP to connect to. If a hostname is used it
613	<	* must match the reverse dns of the server.
612	>	* host: the host or IP address to connect to. If a hostname is used,
613	>	* it must match the reverse DNS of the server.
614		*/
615	<	host = "192.168.0.1";
615	>	host = "192.0.2.4";
616
617		/*
618	<	* vhost: the IP to bind to when we connect outward to servers.
619	<	* serverinfo::vhost and serverinfo::vhost6 will be overridden
618	>	* vhost: the IP address to bind to when making outgoing connections to
619	>	* servers. serverinfo::vhost and serverinfo::vhost6 will be overridden
620		* by this directive.
621		*/
622	<	vhost = "192.168.0.2";
622	>	vhost = "192.0.2.5";
623
624		/*
625	<	* passwords: the passwords we send (OLD C:) and accept (OLD N:).
626	<	* The remote server will have these passwords reversed.
625	>	* send_password, accept_password: the passwords to send and accept.
626	>	* The remote server will have these passwords swapped.
627		*/
628		send_password = "password";
629		accept_password = "anotherpassword";
630
631		/*
632	<	* encrypted: controls whether the accept_password above has been
632	>	* encrypted: indicates whether the accept_password above has been
633		* encrypted.
634		*/
635		encrypted = no;
636
637	<	/* port: the port to connect to this server on */
637	>	/* port: the port to connect to this server on. */
638		port = 6666;
639
640		/*
#	Line 582 | Line 649 | connect {
649		*/
650		#       leaf_mask = "*.uk";
651
652	<	/* class: the class this server is in */
652	>	/* class: the class this server is in. */
653		class = "server";
654
655		/*
656	<	* ssl_cipher_list:
657	<	*
658	<	* List of ciphers that the server we are connecting to must support.
592	<	* If the server isn't capable of any cipher listed below, the
593	<	* connection will simply be rejected.
656	>	* ssl_cipher_list: list of ciphers that the server we are connecting to
657	>	* must support. If the server is not capable of using any of the ciphers
658	>	* listed below, the connection will simply be rejected.
659		* Can be used to enforce stronger ciphers, even though this option
660		* is not necessarily required to establish a SSL/TLS connection.
661		*
662		* Multiple ciphers are separated by colons. The order of preference
663		* is from left to right.
664		*/
665	<	#ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
665	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
666	>
667	>	/*
668	>	* ssl_certificate_fingerprint: enhances security by additionally checking
669	>	* the server's client certificate fingerprint against the specified
670	>	* fingerprint below.
671	>	*/
672	>	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
673
674		/*
675		* autoconn   - controls whether we autoconnect to this server or not,
#	Line 608 | Line 680 | connect {
680		};
681
682		connect {
683	<	name = "ipv6.some.server";
684	<	host = "3ffd:dead:beef::1";
683	>	name = "ipv6.example.net";
684	>	host = "2001:DB8::3";
685		send_password = "password";
686		accept_password = "password";
687		port = 6666;
#	Line 628 | Line 700 | connect {
700		*/
701		cluster {
702		/*
703	<	* name: the server to share with, this can take wildcards
703	>	* name: the server to share with; this can take wildcards
704		*
705	<	* NOTE: only local actions will be clustered, meaning if
705	>	* NOTE: only local actions will be clustered, meaning that if
706		*       the server receives a shared kline/unkline/etc, it
707		*       will not be propagated to clustered servers.
708		*
709		*       Remote servers are not necessarily required to accept
710	<	*       clustered lines, they need a shared{} for *THIS* server
711	<	*       in order to accept them.
710	>	*       clustered lines, they need a shared {} block for *THIS*
711	>	*       server in order to accept them.
712		*/
713	<	name = "*.arpa";
713	>	name = "*.example.net";
714
715		/*
716	<	* type: list of what to share, options are as follows:
716	>	* type: list of what to share; options are as follows:
717		*      dline   - share dlines
718		*      undline - share undlines
719		*      kline   - share klines
#	Line 659 | Line 731 | cluster {
731		/*
732		* shared {}: users that are allowed to remote kline
733		*
734	<	* NOTE: This can be effectively used for remote klines.
734	>	* NOTE: This can effectively be used for remote klines.
735		*       Please note that there is no password authentication
736		*       for users setting remote klines. You must also be
737		*       /oper'd in order to issue a remote kline.
738		*/
739		shared {
740		/*
741	<	* name: the server the user must be on to set klines. If this is not
742	<	* specified, the user will be allowed to kline from all servers.
741	>	* name: the server the user must be connected to in order to set klines.
742	>	* If this is not specified, the user will be allowed to kline from all
743	>	* servers.
744		*/
745	<	name = "irc2.some.server";
745	>	name = "irc2.example.net";
746
747		/*
748		* user: the user@host mask that is allowed to set klines. If this is
#	Line 686 | Line 759 | shared {
759		*      unkline - allow oper/server to unkline
760		*      xline   - allow oper/server to xline
761		*      unxline - allow oper/server to unxline
762	+	*      rehash  - allow oper/server to rehash
763		*      resv    - allow oper/server to resv
764		*      unresv  - allow oper/server to unresv
765		*      locops  - allow oper/server to locops - only used for servers that cluster
#	Line 696 | Line 770 | shared {
770
771		/*
772		* kill {}:  users that are not allowed to connect
773	<	* Oper issued klines will be added to the specified kline config
773	>	* Oper issued klines will be added to the specified kline database
774		*/
775		kill {
776	<	user = "bad@*.hacked.edu";
776	>	user = "bad@*.example.net";
777		reason = "Obviously hacked account";
778		};
779
780		/*
781	<	* deny {}:  IPs that are not allowed to connect (before DNS/ident lookup)
782	<	* Oper issued dlines will be added to the specified dline config
781	>	* deny {}:  IP addresses that are not allowed to connect
782	>	* (before DNS/ident lookup)
783	>	* Oper issued dlines will be added to the specified dline database
784		*/
785		deny {
786	<	ip = "10.0.1.0/24";
786	>	ip = "192.0.2.0/28";
787		reason = "Reconnecting vhosted bots";
788		};
789
790		/*
791	<	* exempt {}:  IPs that are exempt from deny {} and Dlines
791	>	* exempt {}:  IP addresses that are exempt from deny {} and Dlines
792		*/
793		exempt {
794	<	ip = "192.168.0.0/16";
794	>	ip = "192.0.2.240/28";
795	>
796	>	/* The 'ip' directives can be stacked */
797	>	ip = "10.0.0.0/8";
798	>	ip = "fc00::/7";
799		};
800
801		/*
802		* resv {}:  nicks and channels users may not use/join
803		*/
804		resv { mask = "clone*"; reason = "Clone bots"; };
805	+	resv { mask = "Global"; reason = "Reserved for services"; };
806		resv { mask = "ChanServ"; reason = "Reserved for services"; };
807		resv { mask = "NickServ"; reason = "Reserved for services"; };
808		resv { mask = "OperServ"; reason = "Reserved for services"; };
#	Line 736 | Line 816 | resv { mask = "#*services*"; reason = "R
816		resv {
817		/*
818		* mask: masks starting with a '#' are automatically considered
819	<	* as channel name mask.
819	>	* as channel name masks.
820		*/
821		mask = "#helsinki";
822	<	reason = "Channel is reserved for finnish inhabitants";
822	>	reason = "Channel is reserved for Finnish inhabitants";
823
824		/*
825		* exempt: can be either a ISO 3166 alpha-2 two letter country
#	Line 750 | Line 830 | resv {
830		};
831
832		/*
833	<	* gecos {}:  Used for banning users based on their "realname".
833	>	* gecos {}:  used for banning users based on their "realname".
834		*/
835		gecos {
836		name = "*sex*";
#	Line 763 | Line 843 | gecos {
843		};
844
845		/*
846	<	* channel {}:  The channel block contains options pertaining to channels
846	>	* service {}: specifies a server which may act as a network service
847	>	*
848	>	* NOTE: it is very important that every server on the network
849	>	*       has the same service {} block.
850	>	*/
851	>	service {
852	>	/* name: the actual name of the service. Wildcards are not allowed. */
853	>	name = "service.example.net";
854	>
855	>	/* The 'name' directives can be stacked. */
856	>	name = "stats.example.net";
857	>	};
858	>
859	>	/*
860	>	* pseudo {}: adds pseudo/custom commands also known as service aliases
861	>	*/
862	>	pseudo {
863	>	/* command: the actual command/alias. */
864	>	command = "IDENTIFY";
865	>
866	>	/* prepend: optional text that can be prepended to the user's message. */
867	>	prepend = "IDENTIFY ";
868	>
869	>	/* name: the service name, used for error messages. */
870	>	name = "NickServ";
871	>
872	>	/* target: the actual target where this message should be sent to. */
873	>	target = "NickServ@service.example.net";
874	>	};
875	>
876	>	pseudo {
877	>	command = "CHANSERV";
878	>	name = "ChanServ";
879	>	target = "ChanServ@service.example.net";
880	>	};
881	>
882	>	pseudo {
883	>	command = "CS";
884	>	name = "ChanServ";
885	>	target = "ChanServ@service.example.net";
886	>	};
887	>
888	>	pseudo {
889	>	command = "NICKSERV";
890	>	name = "NickServ";
891	>	target = "NickServ@service.example.net";
892	>	};
893	>
894	>	pseudo {
895	>	command = "NS";
896	>	name = "NickServ";
897	>	target = "NickServ@service.example.net";
898	>	};
899	>
900	>	pseudo {
901	>	command = "MEMOSERV";
902	>	name = "MemoServ";
903	>	target = "MemoServ@service.example.net";
904	>	};
905	>
906	>	pseudo {
907	>	command = "MS";
908	>	name = "MemoServ";
909	>	target = "MemoServ@service.example.net";
910	>	};
911	>
912	>	pseudo {
913	>	command = "OPERSERV";
914	>	name = "OperServ";
915	>	target = "OperServ@service.example.net";
916	>	};
917	>
918	>	pseudo {
919	>	command = "OS";
920	>	name = "OperServ";
921	>	target = "OperServ@service.example.net";
922	>	};
923	>
924	>	pseudo {
925	>	command = "HOSTSERV";
926	>	name = "HostServ";
927	>	target = "HostServ@service.example.net";
928	>	};
929	>
930	>	pseudo {
931	>	command = "HS";
932	>	name = "HostServ";
933	>	target = "HostServ@service.example.net";
934	>	};
935	>
936	>	pseudo {
937	>	command = "BOTSERV";
938	>	name = "BotServ";
939	>	target = "BotServ@service.example.net";
940	>	};
941	>
942	>	pseudo {
943	>	command = "BS";
944	>	name = "BotServ";
945	>	target = "BotServ@service.example.net";
946	>	};
947	>
948	>	/*
949	>	* channel {}:  the channel block contains options pertaining to channels
950		*/
951		channel {
952		/*
953		* disable_fake_channels: this option, if set to 'yes', will
954	<	* disallow clients to create or join channels that have one
954	>	* disallow clients from creating or joining channels that have one
955		* of the following ASCII characters in their name:
956		*
957		*   2 | bold
#	Line 782 | Line 965 | channel {
965		disable_fake_channels = yes;
966
967		/*
968	<	* knock_delay: The amount of time a user must wait between issuing
969	<	* the knock command.
968	>	* invite_client_count, invite_client_time: how many INVITE commands
969	>	* are permitted per client per invite_client_time.
970		*/
971	<	knock_delay = 5 minutes;
971	>	invite_client_count = 10;
972	>	invite_client_time = 5 minutes;
973
974		/*
975	<	* knock_delay_channel: How often a knock to any specific channel
976	<	* is permitted, regardless of the user sending the knock.
975	>	* invite_delay_channel: how often an INVITE to any specific channel
976	>	* is permitted, regardless of the user sending the INVITE.
977		*/
978	<	knock_delay_channel = 1 minute;
978	>	invite_delay_channel = 5 seconds;
979
980		/*
981	<	* max_chans_per_user: The maximum number of channels a user can
982	<	* join/be on.
981	>	* knock_client_count, knock_client_time: how many KNOCK commands
982	>	* are permitted per client per knock_client_time.
983		*/
984	<	max_chans_per_user = 25;
984	>	knock_client_count = 1;
985	>	knock_client_time = 5 minutes;
986
987		/*
988	<	* max_chans_per_oper: The maximum number of channels an oper can
989	<	* join/be on.
988	>	* knock_delay_channel: how often a KNOCK to any specific channel
989	>	* is permitted, regardless of the user sending the KNOCK.
990		*/
991	<	max_chans_per_oper = 50;
807	<
808	<	/* max_bans: maximum number of +b/e/I modes in a channel */
809	<	max_bans = 100;
991	>	knock_delay_channel = 1 minute;
992
993		/*
994	<	* how many joins in how many seconds constitute a flood, use 0 to
995	<	* disable. +b opers will be notified (changeable via /set)
994	>	* max_channels: the maximum number of channels a user can join/be on.
995	>	* This is a default value which can be overriden with class {} blocks.
996		*/
997	<	join_flood_count = 16;
816	<	join_flood_time = 8 seconds;
997	>	max_channels = 25;
998
999	<	/*
1000	<	* splitcode: The ircd will now check splitmode every few seconds.
820	<	*
821	<	* Either split users or split servers can activate splitmode, but
822	<	* both conditions must be met for the ircd to deactivate splitmode.
823	<	*
824	<	* You may force splitmode to be permanent by /quote set splitmode on
825	<	*/
999	>	/* max_invites: the maximum number of channels a user can be invited to. */
1000	>	max_invites = 20;
1001
1002	<	/*
1003	<	* default_split_user_count: when the usercount is lower than this level,
829	<	* consider ourselves split. This must be set for automatic splitmode.
830	<	*/
831	<	default_split_user_count = 0;
1002	>	/* max_bans: maximum number of +b/e/I modes in a channel. */
1003	>	max_bans = 100;
1004
1005		/*
1006	<	* default_split_server_count: when the servercount is lower than this,
1007	<	* consider ourselves split. This must be set for automatic splitmode.
1006	>	* default_join_flood_count, default_join_flood_time:
1007	>	* how many joins in how many seconds constitute a flood. Use 0 to disable.
1008	>	* +b opers will be notified. These are only default values which can be
1009	>	* changed via "/QUOTE SET JFLOODCOUNT" and "/QUOTE SET JFLOODTIME".
1010		*/
1011	<	default_split_server_count = 0;
1012	<
839	<	/* no_create_on_split: disallow users creating channels on split. */
840	<	no_create_on_split = yes;
841	<
842	<	/* no_join_on_split: disallow users joining channels at all on a split. */
843	<	no_join_on_split = no;
1011	>	default_join_flood_count = 18;
1012	>	default_join_flood_time = 6 seconds;
1013		};
1014
1015		/*
1016	<	* serverhide {}:  The serverhide block contains the options regarding
1017	<	* serverhiding
1016	>	* serverhide {}:  the serverhide block contains the options regarding
1017	>	* to server hiding. For more information regarding server hiding,
1018	>	* please see doc/serverhide.txt
1019		*/
1020		serverhide {
1021		/*
1022	+	* disable_remote_commands: disable users issuing commands
1023	+	* on remote servers.
1024	+	*/
1025	+	disable_remote_commands = no;
1026	+
1027	+	/*
1028		* flatten_links: this option will show all servers in /links appear
1029	<	* that they are linked to this current server.
1029	>	* as though they are linked to this current server.
1030		*/
1031		flatten_links = no;
1032
1033		/*
1034	<	* links_delay: how often to update the links file when it is
1034	>	* flatten_links_delay: how often to update the links file when it is
1035		* flattened.
1036		*/
1037	<	links_delay = 5 minutes;
1037	>	flatten_links_delay = 5 minutes;
1038	>
1039	>	/*
1040	>	* flatten_links_file: path to the flatten links cache file.
1041	>	*/
1042	>	flatten_links_file = "var/lib/links.txt";
1043
1044		/*
1045		* hidden: hide this server from a /links output on servers that
#	Line 874 | Line 1055 | serverhide {
1055
1056		/*
1057		* hide_services: define this if you want to hide the location of
1058	<	* services servers that are specified in the service{} block.
1058	>	* services servers that are specified in the service {} block.
1059		*/
1060		hide_services = no;
1061
1062		/*
1063	<	* Use this as the servername users see if hide_servers = yes.
1063	>	* hidden_name: use this as the servername users see if hide_servers = yes.
1064		*/
1065	<	hidden_name = "*.hidden.com";
1065	>	hidden_name = "*.example.net";
1066
1067		/*
1068	<	* hide_server_ips: If this is disabled, opers will be unable to see
1069	<	* servers ips and will be shown a masked ip, admins will be shown the
1070	<	* real ip.
1068	>	* hide_server_ips: if this is disabled, opers will be unable to see
1069	>	* servers' IP addresses and will be shown a masked IP address; admins
1070	>	* will be shown the real IP address.
1071		*
1072	<	* If this is enabled, nobody can see a servers ip. *This is a kludge*,
1073	<	* it has the side effect of hiding the ips everywhere, including
1074	<	* logfiles.
1072	>	* If this is enabled, nobody can see a server's IP address.
1073	>	* *This is a kludge*: it has the side effect of hiding the IP addresses
1074	>	* everywhere, including logfiles.
1075		*
1076		* We recommend you leave this disabled, and just take care with who you
1077		* give administrator privileges to.
#	Line 899 | Line 1080 | serverhide {
1080		};
1081
1082		/*
1083	<	* general {}:  The general block contains many of the options that were once
1083	>	* general {}:  the general block contains many of the options that were once
1084		* compiled in options in config.h
1085		*/
1086		general {
1087	<	/* services_name: servername of nick/channel services */
1088	<	services_name = "service.someserver";
1087	>	/*
1088	>	* cycle_on_host_change: sends a fake QUIT/JOIN combination
1089	>	* when services change the hostname of a specific client.
1090	>	*/
1091	>	cycle_on_host_change = yes;
1092
1093		/* max_watch: maximum WATCH entries a client can have. */
1094	<	max_watch = 60;
1094	>	max_watch = 50;
1095
1096	<	/* gline_enable: enable glines, network wide temp klines. */
1097	<	gline_enable = yes;
1096	>	/* max_accept: maximum allowed /accept's for +g user mode. */
1097	>	max_accept = 50;
1098
1099	<	/*
1100	<	* gline_duration: the amount of time a gline will remain on your
917	<	* server before expiring.
918	<	*/
919	<	gline_duration = 1 day;
1099	>	/* whowas_history_length: maximum length of the WHOWAS nick name history. */
1100	>	whowas_history_length = 15000;
1101
1102		/*
1103	<	* gline_request_duration: how long a pending G-line can be around.
1104	<	* 10 minutes should be plenty.
1103	>	* dline_min_cidr: the minimum required length of a CIDR bitmask
1104	>	* for IPv4 based D-lines.
1105		*/
1106	<	gline_request_duration = 10 minutes;
1106	>	dline_min_cidr = 16;
1107
1108		/*
1109	<	* gline_min_cidr: the minimum required length of a CIDR bitmask
1110	<	* for IPv4 based glines.
1109	>	* dline_min_cidr6: the minimum required length of a CIDR bitmask
1110	>	* for IPv6 based D-lines.
1111		*/
1112	<	gline_min_cidr = 16;
1112	>	dline_min_cidr6 = 48;
1113
1114		/*
1115	<	* gline_min_cidr6: the minimum required length of a CIDR bitmask
1116	<	* for IPv6 based glines.
1115	>	* kline_min_cidr: the minimum required length of a CIDR bitmask
1116	>	* for IPv4 based K-lines.
1117		*/
1118	<	gline_min_cidr6 = 48;
1118	>	kline_min_cidr = 16;
1119
1120		/*
1121	<	* Whether to automatically set mode +i on connecting users.
1121	>	* kline_min_cidr6: the minimum required length of a CIDR bitmask
1122	>	* for IPv6 based K-lines.
1123		*/
1124	<	invisible_on_connect = yes;
1124	>	kline_min_cidr6 = 48;
1125
1126		/*
1127	<	* kill_chase_time_limit: maximum time from the nickname change that
1128	<	* still causes KILL automatically to switch for the current nick of
947	<	* that user.
1127	>	* invisible_on_connect: whether to automatically set user mode +i
1128	>	* on connecting users.
1129		*/
1130	<	kill_chase_time_limit = 90 seconds;
1130	>	invisible_on_connect = yes;
1131
1132		/*
1133	<	* hide_spoof_ips: if disabled, opers will be allowed to see the real
1134	<	* IP of spoofed users in /trace etc. If this is defined they will be
1135	<	* shown a masked IP.
1133	>	* kill_chase_time_limit: KILL chasing is a feature whereby a KILL
1134	>	* issued for a user who has recently changed nickname will be applied
1135	>	* automatically to the new nick. kill_chase_time_limit is the maximum
1136	>	* time following a nickname change that this chasing will apply.
1137		*/
1138	<	hide_spoof_ips = yes;
1138	>	kill_chase_time_limit = 30 seconds;
1139
1140		/*
1141	<	* Ignore bogus timestamps from other servers. Yes, this will desync the
1142	<	* network, but it will allow chanops to resync with a valid non TS 0
1141	>	* ignore_bogus_ts: ignore bogus timestamps from other servers.
1142	>	* Yes, this will desync the network, but it will allow chanops
1143	>	* to resync with a valid non TS 0.
1144		*
1145		* This should be enabled network wide, or not at all.
1146		*/
#	Line 965 | Line 1148 | general {
1148
1149		/*
1150		* disable_auth: completely disable ident lookups; if you enable this,
1151	<	* be careful of what you set need_ident to in your auth {} blocks
1151	>	* be careful of what you set need_ident to in your auth {} blocks.
1152		*/
1153		disable_auth = no;
1154
972	–	/* disable_remote_commands: disable users doing commands on remote servers. */
973	–	disable_remote_commands = no;
974	–
1155		/*
1156		* tkline_expire_notices: enables or disables temporary kline/xline
1157		* expire notices.
#	Line 980 | Line 1160 | general {
1160
1161		/*
1162		* default_floodcount: the default value of floodcount that is configurable
1163	<	* via /quote set floodcount. This is the amount of lines a user
1164	<	* may send to any other user/channel in one second.
1163	>	* via /quote set floodcount. This is the number of lines a user may send
1164	>	* to any other user/channel in one second. Set to 0 to disable.
1165		*/
1166		default_floodcount = 10;
1167
1168		/*
1169	<	* failed_oper_notice: send a notice to all opers on the server when
1169	>	* failed_oper_notice: send a notice to all opers on the server when
1170		* someone tries to OPER and uses the wrong password, host or ident.
1171		*/
1172		failed_oper_notice = yes;
1173
1174		/*
1175	<	* dots_in_ident: the amount of '.' characters permitted in an ident
1175	>	* dots_in_ident: the number of '.' characters permitted in an ident
1176		* reply before the user is rejected.
1177		*/
1178		dots_in_ident = 2;
1179
1180		/*
1181	<	* min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1182	<	* placed via the server. K-lines hand placed are exempt from limits.
1183	<	* Wildcard chars: '.', ':', '*', '?', '@', '!'
1181	>	* min_nonwildcard: the minimum number of non-wildcard characters in
1182	>	* k/d lines placed via the server. K-lines hand-placed are exempt from
1183	>	* this limit.
1184	>	* Wildcard characters: '.', ':', '*', '?'
1185		*/
1186		min_nonwildcard = 4;
1187
1188		/*
1189	<	* min_nonwildcard_simple: the minimum non wildcard characters in
1190	<	* gecos bans. Wildcard chars: '*', '?'
1189	>	* min_nonwildcard_simple: the minimum number of non-wildcard characters
1190	>	* in gecos bans. Wildcard characters: '*', '?'
1191		*/
1192		min_nonwildcard_simple = 3;
1193
1013	–	/* max_accept: maximum allowed /accept's for +g usermode. */
1014	–	max_accept = 20;
1015	–
1194		/* anti_nick_flood: enable the nickflood control code. */
1195		anti_nick_flood = yes;
1196
1197	<	/* nick flood: the nick changes allowed in the specified period */
1198	<	max_nick_time = 20 seconds;
1197	>	/*
1198	>	* max_nick_changes, max_nick_time: the number of nick changes allowed in
1199	>	* the specified period.
1200	>	*/
1201		max_nick_changes = 5;
1202	+	max_nick_time = 20 seconds;
1203	+
1204	+	/*
1205	+	* away_count, away_time: how many AWAY commands are permitted per
1206	+	* client per away_time.
1207	+	*/
1208	+	away_count = 2;
1209	+	away_time = 10 seconds;
1210
1211		/*
1212		* anti_spam_exit_message_time: the minimum time a user must be connected
1213	<	* before custom quit messages are allowed.
1213	>	* before custom PART/QUIT messages are allowed.
1214		*/
1215		anti_spam_exit_message_time = 5 minutes;
1216
1217		/*
1218	<	* ts delta: the time delta allowed between server clocks before
1219	<	* a warning is given, or before the link is dropped. All servers
1220	<	* should run ntpdate/rdate to keep clocks in sync
1218	>	* ts_warn_delta, ts_max_delta: the time delta allowed between server
1219	>	* clocks before a warning is given, or before the link is dropped.
1220	>	* All servers should run ntpdate/rdate to keep clocks in sync.
1221		*/
1222	<	ts_warn_delta = 30 seconds;
1223	<	ts_max_delta = 5 minutes;
1222	>	ts_warn_delta = 3 seconds;
1223	>	ts_max_delta = 15 seconds;
1224
1225		/*
1226	<	* warn_no_nline: warn opers about servers that try to connect but
1227	<	* we don't have a connect {} block for. Twits with misconfigured
1228	<	* servers can get really annoying with this enabled.
1226	>	* warn_no_connect_block: warn opers about servers that try to connect
1227	>	* but for which we don't have a connect {} block. Twits with
1228	>	* misconfigured servers can become really annoying with this enabled.
1229		*/
1230	<	warn_no_nline = yes;
1230	>	warn_no_connect_block = yes;
1231
1232		/*
1233		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1234		* operators and administrators. Doing so is a good idea in case
1235	<	* there are any exempted (exempt{}) server IPs you don't want to
1236	<	* see leaked.
1235	>	* there are any exempted (exempt {}) server IP addresses you don't
1236	>	* want to see leaked.
1237		*/
1238		stats_e_disabled = no;
1239
1240	<	/* stats_o_oper only: make stats o (opers) oper only */
1240	>	/* stats_m_oper_only: make /stats m/M (messages) oper only. */
1241	>	stats_m_oper_only = yes;
1242	>
1243	>	/* stats_o_oper_only: make stats o (opers) oper only. */
1244		stats_o_oper_only = yes;
1245
1246	<	/* stats_P_oper_only: make stats P (ports) oper only */
1246	>	/* stats_P_oper_only: make stats P (ports) oper only. */
1247		stats_P_oper_only = yes;
1248
1249	+	/* stats_u_oper_only: make stats u (uptime) oper only. */
1250	+	stats_u_oper_only = no;
1251	+
1252		/*
1253	<	* stats i oper only: make stats i (auth {}) oper only. Set to:
1254	<	*     yes    - show users no auth blocks, made oper only.
1255	<	*     masked - show users first matching auth block
1256	<	*     no     - show users all auth blocks.
1253	>	* stats_i_oper_only: make stats i (auth {}) oper only. Set to:
1254	>	*     yes    - show users no auth {} blocks, made oper only
1255	>	*     masked - show users the first matching auth {} block
1256	>	*     no     - show users all auth {} blocks
1257		*/
1258		stats_i_oper_only = yes;
1259
1260		/*
1261		* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1262	<	*     yes    - show users no auth blocks, made oper only
1263	<	*     masked - show users first matching auth block
1264	<	*     no     - show users all auth blocks.
1262	>	*     yes    - show users no klines, made oper only
1263	>	*     masked - show users the first matching kline
1264	>	*     no     - show users all klines
1265		*/
1266		stats_k_oper_only = yes;
1267
#	Line 1079 | Line 1273 | general {
1273
1274		/*
1275		* opers_bypass_callerid: allows operators to bypass +g and message
1276	<	* anyone who has it set (useful if you use services).
1276	>	* anyone who has it set.
1277		*/
1278		opers_bypass_callerid = no;
1279
1280		/*
1281	<	* pace_wait_simple: time between use of less intensive commands
1282	<	* (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1281	>	* pace_wait_simple: minimum time required between use of less
1282	>	* intensive commands
1283	>	* (ADMIN, HELP, LUSERS, VERSION, remote WHOIS)
1284		*/
1285		pace_wait_simple = 1 second;
1286
1287		/*
1288	<	* pace_wait: time between more intensive commands
1289	<	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1288	>	* pace_wait: minimum time required between use of more intensive commands
1289	>	* (INFO, LINKS, MAP, MOTD, STATS, WHO, WHOWAS)
1290		*/
1291		pace_wait = 10 seconds;
1292
1293		/*
1294	<	* short_motd: send clients a notice telling them to read the motd
1295	<	* instead of forcing a motd to clients who may simply ignore it.
1294	>	* short_motd: send clients a notice telling them to read the MOTD
1295	>	* instead of forcing an MOTD to clients who may simply ignore it.
1296		*/
1297		short_motd = no;
1298
1299		/*
1300	<	* ping_cookie: require clients to respond exactly to a ping command,
1300	>	* ping_cookie: require clients to respond exactly to a PING command,
1301		* can help block certain types of drones and FTP PASV mode spoofing.
1302		*/
1303		ping_cookie = no;
#	Line 1111 | Line 1306 | general {
1306		no_oper_flood = yes;
1307
1308		/*
1309	<	* true_no_oper_flood: completely eliminate flood limits for opers
1115	<	* and for clients with can_flood = yes in their auth {} blocks.
1116	<	*/
1117	<	true_no_oper_flood = yes;
1118	<
1119	<	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1120	<	oper_pass_resv = yes;
1121	<
1122	<	/* REMOVE ME.  The following line checks you've been reading. */
1123	<	havent_read_conf = 1;
1124	<
1125	<	/*
1126	<	* max_targets: the maximum amount of targets in a single
1309	>	* max_targets: the maximum number of targets in a single
1310		* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1311		*/
1312		max_targets = 4;
1313
1314		/*
1315	<	* usermodes configurable: a list of usermodes for the options below
1315	>	* user modes configurable: a list of user modes for the options below
1316		*
1317		* +b - bots         - See bot and drone flooding notices
1318		* +c - cconn        - Client connection/quit notices
1136	–	* +C - cconn_full   - Client connection/quit notices full
1319		* +D - deaf         - Don't receive channel messages
1320		* +d - debug        - See debugging notices
1321		* +e - external     - See remote server connection and split notices
1322		* +F - farconnect   - Remote client connection/quit notices
1323	<	* +f - full         - See auth{} block full notices
1323	>	* +f - full         - See auth {} block full notices
1324		* +G - softcallerid - Server Side Ignore for users not on your channels
1325		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1326	<	* +H - hidden       - Hides operator status to other users
1327	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
1146	<	*                     a channel
1326	>	* +H - hidden       - Hides IRC operator status to other users
1327	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
1328		* +j - rej          - See rejected client notices
1329		* +k - skill        - See server generated KILL messages
1330		* +l - locops       - See LOCOPS messages
1331		* +n - nchange      - See client nick changes
1332	+	* +p - hidechans    - Hides channel list in WHOIS
1333	+	* +q - hideidle     - Hides idle and signon time in WHOIS
1334		* +R - nononreg     - Only receive private messages from registered clients
1335		* +s - servnotice   - See general server notices
1336		* +u - unauth       - See unauthorized client notices
1337		* +w - wallop       - See server generated WALLOPS
1338		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1156	–	* +z - operwall     - See oper generated WALLOPS
1339		*/
1340
1341	<	/* oper_only_umodes: usermodes only opers may set */
1342	<	oper_only_umodes = bots, cconn, cconn_full, debug, full, hidden, skill,
1343	<	nchange, rej, spy, external, operwall,
1162	<	locops, unauth, farconnect;
1163	<
1164	<	/* oper_umodes: default usermodes opers get when they /oper */
1165	<	oper_umodes = bots, locops, servnotice, operwall, wallop;
1341	>	/* oper_only_umodes: user modes only operators may set. */
1342	>	oper_only_umodes = bots, cconn, debug, external, farconnect, full, hidden,
1343	>	locops, nchange, rej, skill, spy, unauth;
1344
1345	<	/*
1346	<	* use_egd: if your system does not have *random devices yet you
1169	<	* want to use OpenSSL and encrypted links, enable this. Beware -
1170	<	* EGD is *very* CPU intensive when gathering data for its pool.
1171	<	*/
1172	<	#       use_egd = yes;
1345	>	/* oper_umodes: default user modes operators get when they successfully OPER. */
1346	>	oper_umodes = bots, locops, servnotice, wallop;
1347
1348		/*
1349	<	* egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1350	<	* which automatically finds the path.
1349	>	* throttle_count: the maximum number of connections from the same
1350	>	* IP address allowed in throttle_time duration.
1351		*/
1352	<	#       egdpool_path = "/var/run/egd-pool";
1352	>	throttle_count = 1;
1353
1354		/*
1355	<	* throttle_time: the minimum amount of time between connections from
1356	<	* the same ip. exempt {} blocks are excluded from this throttling.
1355	>	* throttle_time: the minimum amount of time required between
1356	>	* connections from the same IP address. exempt {} blocks are
1357	>	* excluded from this throttling.
1358		* Offers protection against flooders who reconnect quickly.
1359		* Set to 0 to disable.
1360		*/
1361	<	throttle_time = 10;
1361	>	throttle_time = 2 seconds;
1362		};
1363
1364		modules {
#	Line 1191 | Line 1366 | modules {
1366		* path: other paths to search for modules specified below
1367		* and in "/module load".
1368		*/
1369	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1370	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1369	>	path = "lib/ircd-hybrid/modules";
1370	>	#       path = "lib/ircd-hybrid/modules/extra";
1371	>	path = "lib/ircd-hybrid/modules/autoload";
1372
1373		/* module: the name of a module to load on startup/rehash. */
1374	<	#module = "some_module.la";
1374	>	#       module = "some_module.la";
1375		};
1376
1377		/*
#	Line 1207 | Line 1383 | log {
1383
1384		file {
1385		type = oper;
1386	<	name = "/home/ircd/var/log/oper.log";
1386	>	name = "var/log/oper.log";
1387		size = unlimited;
1388		};
1389
1390		file {
1391		type = user;
1392	<	name = "/home/ircd/var/log/user.log";
1392	>	name = "var/log/user.log";
1393		size = 50 megabytes;
1394		};
1395
1396		file {
1397		type = kill;
1398	<	name = "/home/ircd/var/log/kill.log";
1398	>	name = "var/log/kill.log";
1399		size = 50 megabytes;
1400		};
1401
1402		file {
1403		type = kline;
1404	<	name = "/home/ircd/var/log/kline.log";
1404	>	name = "var/log/kline.log";
1405		size = 50 megabytes;
1406		};
1407
1408		file {
1409		type = dline;
1410	<	name = "/home/ircd/var/log/dline.log";
1410	>	name = "var/log/dline.log";
1411	>	size = 50 megabytes;
1412	>	};
1413	>
1414	>	file {
1415	>	type = xline;
1416	>	name = "var/log/xline.log";
1417		size = 50 megabytes;
1418		};
1419
1420		file {
1421	<	type = gline;
1422	<	name = "/home/ircd/var/log/gline.log";
1421	>	type = resv;
1422	>	name = "var/log/resv.log";
1423		size = 50 megabytes;
1424		};
1425
1426		file {
1427		type = debug;
1428	<	name = "/home/ircd/var/log/debug.log";
1428	>	name = "var/log/debug.log";
1429		size = 50 megabytes;
1430		};
1431		};

Comparing ircd-hybrid/trunk/doc/reference.conf (property svn:keywords):
Revision 2150 by michael, Fri May 31 18:39:43 2013 UTC vs.
Revision 7766 by michael, Fri Oct 7 16:27:37 2016 UTC

#	Line 1 | Line 1
1	<	Id Revision
1	>	Id

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)