ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/doc/reference.conf

Comparing ircd-hybrid/trunk/doc/reference.conf (file contents):
Revision 2150 by michael, Fri May 31 18:39:43 2013 UTC vs.
Revision 4122 by michael, Tue Jul 1 17:25:54 2014 UTC

#	Line 1 | Line 1
1	<	/* ircd-hybrid reference configuration file
2	<	* Copyright (C) 2000-2013 Hybrid Development Team
1	>	/*
2	>	* This is an example configuration file for ircd-hybrid
3		*
4	<	* Written by ejb, wcampbel, db, leeh and others
4	>	* Copyright (c) 2000-2014 ircd-hybrid development team
5		*
6		* $Id$
7		*/
8
9		/*
10		* ########################################################################
11	<	* IMPORTANT NOTES:
11	>	* IMPORTANT NOTE:
12		*
13	<	* auth {} blocks MUST be specified in order of precedence.  The first one
14	<	* that matches a user will be used.  So place spoofs first, then specials,
13	>	* auth {} blocks MUST be specified in order of precedence. The first one
14	>	* that matches a user will be used. So place spoofs first, then specials,
15		* then general access.
16		* ########################################################################
17		*
#	Line 23 | Line 23
23		*
24		* Times/durations are written as:
25		*        12 hours 30 minutes 1 second
26	<	*
26	>	*
27		* Valid units of time:
28		*        year, month, week, day, hour, minute, second
29		*
30		* Valid units of size:
31		*        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
32		*
33	<	* Sizes and times may be singular or plural.
34	<	*/
33	>	* Sizes and times may be singular or plural.
34	>	*/
35
36
37		/*
#	Line 39 | Line 39
39		*/
40		serverinfo {
41		/*
42	<	* name: the name of this server.  This cannot be changed at runtime.
42	>	* name: the name of this server. This cannot be changed at runtime.
43		*/
44		name = "hades.arpa";
45
46		/*
47	<	* sid: a server's unique ID.  This is three characters long and must
48	<	* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
47	>	* sid: a server's unique ID. This is three characters long and must
48	>	* be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	+	*
51		* NOTE: The letters must be capitalized. This cannot be changed at runtime.
52		*/
53		sid = "0HY";
#	Line 73 | Line 74 | serverinfo {
74		* vhost: the IP to bind to when we connect outward to ipv4 servers.
75		* This should be an ipv4 IP only, or "*" for INADDR_ANY.
76		*/
77	<	#vhost = "192.169.0.1";
77	>	#       vhost = "192.169.0.1";
78
79		/*
80	<	* vhost6: the IP to bind to when we connect outward to ipv6 servers.
81	<	* This should be an ipv6 IP only, or "*" for INADDR_ANY.
80	>	* vhost6: the address to bind to when we make outgoing connections
81	>	* to IPv6 servers. This should be an IPv6 address, or "*" for INADDR_ANY.
82		*/
83	<	#vhost6 = "3ffe:80e8:546::2";
83	>	#       vhost6 = "3ffe:80e8:546::2";
84
85		/* max_clients: the maximum number of clients allowed to connect. */
86		max_clients = 512;
#	Line 98 | Line 99 | serverinfo {
99		max_topic_length = 160;
100
101		/*
102	<	* rsa_private_key_file: the path to the file containing our
103	<	* rsa key for cryptlink.
102	>	* rsa_private_key_file: the path to the file containing the
103	>	* RSA key.
104	>	*
105	>	* Example commands to store a 2048 bit RSA key in rsa.key:
106		*
104	–	* Example command to store a 2048 bit RSA keypair in
105	–	* rsa.key, and the public key in rsa.pub:
106	–	*
107		*      openssl genrsa -out rsa.key 2048
108	<	*      openssl rsa -in rsa.key -pubout -out rsa.pub
109	<	*      chown <ircd-user>.<ircd.group> rsa.key rsa.pub
108	>	*      chown <ircd-user>.<ircd.group> rsa.key
109		*      chmod 0600 rsa.key
111	–	*      chmod 0644 rsa.pub
110		*/
111	<	#rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
111	>	#       rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
112
113		/*
114		* ssl_certificate_file: the path to the file containing our
115	<	* ssl certificate for encrypted client connection.
115	>	* SSL certificate for encrypted client connection.
116		*
117		* This assumes your private RSA key is stored in rsa.key. You
118		* MUST have an RSA key in order to generate the certificate.
#	Line 132 | Line 130 | serverinfo {
130		*      Common Name: irc.someirc.net
131		*      E-mail: you@domain.com
132		*/
133	<	#ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
133	>	#       ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
134
135		/*
136		* ssl_dh_param_file:
137		*
138		* Path to the PEM encoded Diffie-Hellman parameter file.
139	<	* DH parameters are strictly required when using ciphers
140	<	* with EDH (ephemeral Diffie-Hellman) key exchange.
139	>	* DH parameters are required when using ciphers with EDH
140	>	* (ephemeral Diffie-Hellman) key exchange.
141		*
142		* A DH parameter file can be created by running:
143		*
144	<	*      openssl dhparam -out dhparam.pem 1024
144	>	*      openssl dhparam -out dhparam.pem 2048
145		*
146		* Prime size must be at least 1024 bits. Further information
147		* regarding specific OpenSSL dhparam command-line options
148		* can be found in the OpenSSL manual.
149		*/
150	<	#ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
150	>	#       ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
151	>
152	>	/*
153	>	* ssl_dh_elliptic_curve:
154	>	*
155	>	* Defines the curve to use for the Elliptic Curve Diffie-Hellman (ECDH) algorithm.
156	>	*
157	>	* A list of supported curves by OpenSSL can be obtained by running:
158	>	*
159	>	*      openssl ecparam -list_curves
160	>	*/
161	>	#       ssl_dh_elliptic_curve = "secp521r1";
162
163		/*
164		* ssl_cipher_list:
165		*
166	<	* List of ciphers that are supported by _this_ server. Can be used to
166	>	* List of ciphers to support on _this_ server. Can be used to
167		* enforce specific ciphers for incoming SSL/TLS connections.
168	<	* If a client (which also includes incoming server connections) isn't
169	<	* capable of any cipher listed below, the connection will simply be
170	<	* rejected.
168	>	* If a client (which also includes incoming server connections) is not
169	>	* capable of using any of the ciphers listed here, the connection will
170	>	* simply be rejected.
171		*
172	<	* A list of supported ciphers can be obtained by running:
172	>	* A list of supported ciphers by OpenSSL can be obtained by running:
173		*
174		*      openssl ciphers -ssl3 -tls1 -v
175		*
176		* Multiple ciphers are separated by colons. The order of preference is
177		* from left to right.
178		*/
179	<	#ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
179	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
180	>
181	>	/*
182	>	* ssl_message_digest_algorithm:
183	>	*
184	>	* Defines what cryptographic hash function to use for generating fingerprint
185	>	* hashes of X.509 certificates.
186	>	* Default is SHA-256 if nothing else is specified.
187	>	*
188	>	* A list of supported message digest algorithms by OpenSSL can be obtained by running:
189	>	*
190	>	*      openssl list-message-digest-algorithms
191	>	*/
192	>	#       ssl_message_digest_algorithm = "sha256";
193
194		/*
195		* ssl_server_method:
#	Line 177 | Line 199 | serverinfo {
199		* outgoing (client method) SSL/TLS connections.
200		* This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
201		*/
202	<	#ssl_server_method = tlsv1, sslv3;
203	<	#ssl_client_method = tlsv1;
202	>	#       ssl_server_method = tlsv1, sslv3;
203	>	#       ssl_client_method = tlsv1;
204		};
205
206		/*
#	Line 205 | Line 227 | class {
227
228		/*
229		* number_per_ip: how many local users are allowed to connect
230	<	* from one IP  (optional)
230	>	* from a single IP address  (optional)
231		*/
232		number_per_ip = 2;
233
234		/*
235		* max_local: how many local users are allowed to connect
236	<	* from one ident@host  (optional)
236	>	* from a single ident@host  (optional)
237		*/
238		max_local = 2;
239
#	Line 234 | Line 256 | class {
256		number_per_cidr = 16;
257
258		/*
259	<	* sendq: the amount of data allowed in a clients send queue before
259	>	* sendq: the amount of data allowed in a client's send queue before
260		* they are dropped.
261		*/
262		sendq = 100 kbytes;
263
264		/*
265	<	* recvq: maximum amount of data in a clients receive queue before
265	>	* recvq: the amount of data allowed in a client's receive queue before
266		* they are dropped for flooding. Defaults to 2560 if the chosen
267		* value isn't within the range of 512 to 8000.
268		*/
#	Line 254 | Line 276 | class {
276		max_number = 100;
277		sendq = 100 kbytes;
278
279	+
280	+	/*
281	+	* max_channels: maximum number of channels users in this class can join.
282	+	*/
283	+	max_channels = 60;
284	+
285		/*
286		* min_idle: minimum idle time that is shown in /whois.
287		*/
#	Line 267 | Line 295 | class {
295		/*
296		* flags:
297		*
298	<	* random_idle          - idle time is randomly selected within the
299	<	*                        range of min_idle to max_idle
300	<	* hide_idle_from_opers - fake idle time will be shown to operators, too
298	>	* random_idle          - a fake idle time is set randomly between
299	>	*                        min_idle and max_idle
300	>	* hide_idle_from_opers - the fake idle time will also be shown to operators
301		*/
302		flags = random_idle, hide_idle_from_opers;
303		};
#	Line 284 | Line 312 | class {
312		*/
313		connectfreq = 5 minutes;
314
315	<	/* max number: the amount of servers to autoconnect to. */
315	>	/* max number: the number of servers to autoconnect to. */
316		max_number = 1;
317
318		/* sendq: servers need a higher sendq as they send more data. */
#	Line 292 | Line 320 | class {
320		};
321
322		/*
323	<	* motd {}: specifies various MOTD files. Applies to local users only.
323	>	* motd {}: Allows the display of a different MOTD to a client
324	>	* depending on its origin. Applies to local users only.
325		*/
326		motd {
327		/*
328		* mask: multiple mask entries are permitted. Mask can either be
329	<	* a class name or a hostname.
329	>	* a class name or a hostname. CIDR is supported.
330		*/
331		mask = "*.at";
332		mask = "*.de";
333		mask = "*.ch";
334
335		/*
336	<	* file: path top the actual motd file.
336	>	* file: path to the actual motd file.
337		*/
338		file = "/usr/local/ircd/etc/german.motd";
339		};
#	Line 314 | Line 343 | motd {
343		*/
344		listen {
345		/*
346	<	* port: the specific port to listen on. If no host is specified
347	<	* before, it will listen on all available IPs.
346	>	* port: the port to listen on. If no host is specified earlier
347	>	* in the listen {} block, it will listen on all available IPs.
348		*
349	<	* Ports are separated via a comma, a range may be specified using ".."
349	>	* Ports are separated by commas; a range may be specified using ".."
350		*/
351	<
352	<	/* port: listen on all available IPs, ports 6665 to 6669 */
351	>
352	>	/* port: listen on all available IP addresses, ports 6665 to 6669 */
353		port = 6665 .. 6669;
354
355		/*
356	<	* Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
356	>	* Listen on 192.168.0.1/6697 with SSL enabled and hidden from STATS P
357		* unless you are an administrator.
358		*
359	<	* NOTE: The "flags" directive has to come before "port". Always!
359	>	* NOTE: The "flags" directive always has to come before "port".
360		*
361		* Currently available flags are:
362		*
#	Line 340 | Line 369 | listen {
369		port = 6697;
370
371		/*
372	<	* host: set a specific IP/host the ports after the line will listen
373	<	* on. This may be ipv4 or ipv6.
372	>	* host: set a specific IP address/host to listen on using the
373	>	* subsequent port definitions. This may be IPv4 or IPv6.
374		*/
375		host = "1.2.3.4";
376		port = 7000, 7001;
#	Line 356 | Line 385 | listen {
385		auth {
386		/*
387		* user: the user@host allowed to connect. Multiple user
388	<	* lines are permitted per auth block.
388	>	* lines are permitted within each auth block.
389		*/
390		user = "*@172.16.0.0/12";
391		user = "*test@123D:B567:*";
#	Line 371 | Line 400 | auth {
400		encrypted = yes;
401
402		/*
403	<	* spoof: fake the users host to this. This is free-form, just do
403	>	* spoof: fake the user's host to this. This is free-form, just do
404		* everyone a favor and don't abuse it. ('=' prefix on /stats I)
405		*/
406		spoof = "I.still.hate.packets";
#	Line 401 | Line 430 | auth {
430		auth {
431		/*
432		* redirect: the server and port to redirect a user to. A user does not
433	<	* have to obey the redirection, the ircd just suggests an alternative
433	>	* have to obey the redirection; the ircd just suggests an alternative
434		* server for them.
435		*/
436		redirserv = "this.is.not.a.real.server";
437		redirport = 6667;
438	<
438	>
439		user = "*.server";
440
441		/* class: a class is required even though it is not used */
#	Line 427 | Line 456 | operator {
456		name = "sheep";
457
458		/*
459	<	* user: the user@host required for this operator. Multiple
460	<	* user="" lines are supported.
459	>	* user: the user@host required for this operator. Multiple user
460	>	* lines are permitted within each operator block.
461		*/
462		user = "*sheep@192.168.0.0/16";
463		user = "*@127.0.0.0/8";
#	Line 438 | Line 467 | operator {
467		* need to be encrypted by using the provided mkpasswd tool.
468		* Several password hash algorithms are available depending
469		* on your system's crypt() implementation. For example, a modern
470	<	* glibc already has support for SHA-256/512, and MD5 encryption
470	>	* glibc already has support for the SHA-256/512 and MD5 encryption
471		* algorithms.
472		*/
473		password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
#	Line 451 | Line 480 | operator {
480
481		/*
482		* rsa_public_key_file: the public key for this oper when using Challenge.
483	<	* A password should not be defined when this is used, see
483	>	* A password should not be defined when this is used; see
484		* doc/challenge.txt for more information.
485		*/
486		#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
487
488	+	/*
489	+	* ssl_certificate_fingerprint: enhances security by additionally checking
490	+	* the oper's client certificate fingerprint against the specified
491	+	* fingerprint below.
492	+	*
493	+	* Hint: your users can use the following command to obtain a SHA-256 hash
494	+	* of their ssl certificate:
495	+	*
496	+	*      openssl x509 -sha256 -noout -fingerprint -in cert.pem | sed -e 's/^.*=//;s/://g'
497	+	*/
498	+	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
499	+
500	+	/*
501	+	* ssl_connection_required: client must be connected over SSL/TLS
502	+	* in order to be able to use this oper{} block.
503	+	* Default is 'no' if nothing else is specified.
504	+	*/
505	+	ssl_connection_required = no;
506	+
507		/* class: the class the oper joins when they successfully /oper */
508		class = "opers";
509
510		/*
511	<	* umodes: default usermodes opers get when they /oper. If defined,
511	>	* umodes: the default usermodes opers get when they /oper. If defined,
512		* it will override oper_umodes settings in general {}.
513		* Available usermodes:
514		*
515		* +b - bots         - See bot and drone flooding notices
516		* +c - cconn        - Client connection/quit notices
469	–	* +C - cconn_full   - Client connection/quit notices full
517		* +D - deaf         - Don't receive channel messages
518		* +d - debug        - See debugging notices
519		* +e - external     - See remote server connection and split notices
#	Line 475 | Line 522 | operator {
522		* +G - softcallerid - Server Side Ignore for users not on your channels
523		* +g - callerid     - Server Side Ignore (for privmsgs etc)
524		* +H - hidden       - Hides operator status to other users
525	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
479	<	*                     a channel
525	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
526		* +j - rej          - See rejected client notices
527		* +k - skill        - See server generated KILL messages
528		* +l - locops       - See LOCOPS messages
529		* +n - nchange      - See client nick changes
530	+	* +p - hidechans    - Hides channel list in WHOIS
531	+	* +q - hideidle     - Hides idle and signon time in WHOIS
532		* +R - nononreg     - Only receive private messages from registered clients
533		* +s - servnotice   - See general server notices
534		* +u - unauth       - See unauthorized client notices
535		* +w - wallop       - See server generated WALLOPS
536		* +y - spy          - See LINKS, STATS, TRACE notices etc.
489	–	* +z - operwall     - See oper generated WALLOPS
537		*/
538	<	#       umodes = locops, servnotice, operwall, wallop;
538	>	umodes = locops, servnotice, wallop;
539
540		/*
541	<	* privileges: controls the activities and commands an oper is
541	>	* privileges: controls the activities and commands an oper is
542		* allowed to do on the server. All options default to no.
543		* Available options:
544		*
#	Line 509 | Line 556 | operator {
556		* unkline        - allows UNKLINE                    | ('U' flag)
557		* gline          - allows GLINE                      | ('G' flag)
558		* xline          - allows XLINE                      | ('X' flag)
559	+	* unxline        - allows UNXLINE                    |
560		* locops         - allows LOCOPS                     |
561		* globops        - allows GLOBOPS                    |
562		* wallops        - allows WALLOPS                    |
515	–	* operwall       - allows OPERWALL                   | ('L' flag)
563		* rehash         - allows oper to REHASH config      | ('H' flag)
564		* die            - allows DIE                        | ('D' flag)
565		* restart        - allows RESTART                    |
#	Line 520 | Line 567 | operator {
567		* admin          - gives administrator privileges    | ('A' flag)
568		*/
569		flags = kill, kill:remote, connect, connect:remote, kline, unkline,
570	<	xline, globops, restart, die, rehash, admin, operwall, module;
570	>	xline, globops, restart, die, rehash, admin, module;
571		};
572
573		/*
574	<	* service {}: specifies what server may act as a network service
574	>	* service {}: specifies a server which may act as a network service
575		*
576	<	* NOTE: it is absolutely important that every single server on the network
576	>	* NOTE: it is very important that every server on the network
577		*       has the same service{} block.
578		*/
579		service {
#	Line 535 | Line 582 | service {
582		};
583
584		/*
585	<	* connect {}:  controls servers we connect to
585	>	* connect {}: define a server to connect to
586		*/
587		connect {
588		/* name: the name of the server */
589		name = "irc.uplink.com";
590
591		/*
592	<	* host: the host or IP to connect to. If a hostname is used it
593	<	* must match the reverse dns of the server.
592	>	* host: the host or IP address to connect to. If a hostname is used it
593	>	* must match the reverse DNS of the server.
594		*/
595		host = "192.168.0.1";
596
597		/*
598	<	* vhost: the IP to bind to when we connect outward to servers.
598	>	* vhost: the IP address to bind to when making outgoing connections to
599	>	* servers.
600		* serverinfo::vhost and serverinfo::vhost6 will be overridden
601		* by this directive.
602		*/
603		vhost = "192.168.0.2";
604
605		/*
606	<	* passwords: the passwords we send (OLD C:) and accept (OLD N:).
607	<	* The remote server will have these passwords reversed.
606	>	* passwords: the passwords to send (OLD C:) and accept (OLD N:).
607	>	* The remote server will have these passwords swapped.
608		*/
609		send_password = "password";
610		accept_password = "anotherpassword";
#	Line 589 | Line 637 | connect {
637		* ssl_cipher_list:
638		*
639		* List of ciphers that the server we are connecting to must support.
640	<	* If the server isn't capable of any cipher listed below, the
641	<	* connection will simply be rejected.
640	>	* If the server is not capable of using any of the ciphers listed below,
641	>	* the connection will simply be rejected.
642		* Can be used to enforce stronger ciphers, even though this option
643		* is not necessarily required to establish a SSL/TLS connection.
644		*
645		* Multiple ciphers are separated by colons. The order of preference
646		* is from left to right.
647		*/
648	<	#ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
648	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
649	>
650	>	/*
651	>	* ssl_certificate_fingerprint: enhances security by additionally checking
652	>	* the server's client certificate fingerprint against the specified
653	>	* fingerprint below.
654	>	*/
655	>	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
656
657		/*
658		* autoconn   - controls whether we autoconnect to this server or not,
#	Line 628 | Line 683 | connect {
683		*/
684		cluster {
685		/*
686	<	* name: the server to share with, this can take wildcards
686	>	* name: the server to share with; this can take wildcards
687		*
688	<	* NOTE: only local actions will be clustered, meaning if
688	>	* NOTE: only local actions will be clustered, meaning that if
689		*       the server receives a shared kline/unkline/etc, it
690		*       will not be propagated to clustered servers.
691		*
#	Line 641 | Line 696 | cluster {
696		name = "*.arpa";
697
698		/*
699	<	* type: list of what to share, options are as follows:
699	>	* type: list of what to share; options are as follows:
700		*      dline   - share dlines
701		*      undline - share undlines
702		*      kline   - share klines
#	Line 659 | Line 714 | cluster {
714		/*
715		* shared {}: users that are allowed to remote kline
716		*
717	<	* NOTE: This can be effectively used for remote klines.
717	>	* NOTE: This can effectively be used for remote klines.
718		*       Please note that there is no password authentication
719		*       for users setting remote klines. You must also be
720		*       /oper'd in order to issue a remote kline.
721		*/
722		shared {
723		/*
724	<	* name: the server the user must be on to set klines. If this is not
725	<	* specified, the user will be allowed to kline from all servers.
724	>	* name: the server the user must be connected to in order to set klines.
725	>	* If this is not specified, the user will be allowed to kline from all
726	>	* servers.
727		*/
728		name = "irc2.some.server";
729
#	Line 704 | Line 760 | kill {
760		};
761
762		/*
763	<	* deny {}:  IPs that are not allowed to connect (before DNS/ident lookup)
763	>	* deny {}:  IP addresses that are not allowed to connect
764	>	* (before DNS/ident lookup)
765		* Oper issued dlines will be added to the specified dline config
766		*/
767		deny {
#	Line 713 | Line 770 | deny {
770		};
771
772		/*
773	<	* exempt {}:  IPs that are exempt from deny {} and Dlines
773	>	* exempt {}:  IP addresses that are exempt from deny {} and Dlines
774		*/
775		exempt {
776		ip = "192.168.0.0/16";
#	Line 723 | Line 780 | exempt {
780		* resv {}:  nicks and channels users may not use/join
781		*/
782		resv { mask = "clone*"; reason = "Clone bots"; };
783	+	resv { mask = "Global"; reason = "Reserved for services"; };
784		resv { mask = "ChanServ"; reason = "Reserved for services"; };
785		resv { mask = "NickServ"; reason = "Reserved for services"; };
786		resv { mask = "OperServ"; reason = "Reserved for services"; };
#	Line 736 | Line 794 | resv { mask = "#*services*"; reason = "R
794		resv {
795		/*
796		* mask: masks starting with a '#' are automatically considered
797	<	* as channel name mask.
797	>	* as channel name masks.
798		*/
799		mask = "#helsinki";
800	<	reason = "Channel is reserved for finnish inhabitants";
800	>	reason = "Channel is reserved for Finnish inhabitants";
801
802		/*
803		* exempt: can be either a ISO 3166 alpha-2 two letter country
#	Line 768 | Line 826 | gecos {
826		channel {
827		/*
828		* disable_fake_channels: this option, if set to 'yes', will
829	<	* disallow clients to create or join channels that have one
829	>	* disallow clients from creating or joining channels that have one
830		* of the following ASCII characters in their name:
831		*
832		*   2 | bold
#	Line 782 | Line 840 | channel {
840		disable_fake_channels = yes;
841
842		/*
843	<	* knock_delay: The amount of time a user must wait between issuing
844	<	* the knock command.
843	>	* invite_client_count, invite_client_time: how many INVITE commands
844	>	* are permitted per client per invite_client_time.
845		*/
846	<	knock_delay = 5 minutes;
846	>	invite_client_count = 10;
847	>	invite_client_time = 5 minutes;
848
849		/*
850	<	* knock_delay_channel: How often a knock to any specific channel
851	<	* is permitted, regardless of the user sending the knock.
850	>	* knock_client_count, knock_client_time: how many KNOCK commands
851	>	* are permitted per client per knock_client_time.
852		*/
853	<	knock_delay_channel = 1 minute;
853	>	knock_client_count = 1;
854	>	knock_client_time = 5 minutes;
855
856		/*
857	<	* max_chans_per_user: The maximum number of channels a user can
858	<	* join/be on.
857	>	* knock_delay_channel: how often a KNOCK to any specific channel
858	>	* is permitted, regardless of the user sending the KNOCK.
859		*/
860	<	max_chans_per_user = 25;
860	>	knock_delay_channel = 1 minute;
861
862		/*
863	<	* max_chans_per_oper: The maximum number of channels an oper can
864	<	* join/be on.
863	>	* max_channels: the maximum number of channels a user can join/be on.
864	>	* This is a default value which can be overriden with class{} blocks.
865		*/
866	<	max_chans_per_oper = 50;
866	>	max_channels = 25;
867
868		/* max_bans: maximum number of +b/e/I modes in a channel */
869		max_bans = 100;
870
871		/*
872	<	* how many joins in how many seconds constitute a flood, use 0 to
872	>	* how many joins in how many seconds constitute a flood. Use 0 to
873		* disable. +b opers will be notified (changeable via /set)
874		*/
875		join_flood_count = 16;
876		join_flood_time = 8 seconds;
877
878		/*
879	<	* splitcode: The ircd will now check splitmode every few seconds.
879	>	* The ircd will now check splitmode (whether a server is split from
880	>	* the network) every few seconds; this functionality is known as
881	>	* splitcode and is influenced by the options below.
882		*
883		* Either split users or split servers can activate splitmode, but
884		* both conditions must be met for the ircd to deactivate splitmode.
885	<	*
885	>	*
886		* You may force splitmode to be permanent by /quote set splitmode on
887		*/
888
#	Line 836 | Line 898 | channel {
898		*/
899		default_split_server_count = 0;
900
901	<	/* no_create_on_split: disallow users creating channels on split. */
901	>	/* no_create_on_split: do not allow users to create channels on split. */
902		no_create_on_split = yes;
903
904	<	/* no_join_on_split: disallow users joining channels at all on a split. */
904	>	/* no_join_on_split: do not allow users to join channels on a split. */
905		no_join_on_split = no;
906		};
907
908		/*
909		* serverhide {}:  The serverhide block contains the options regarding
910	<	* serverhiding
910	>	* to server hiding
911		*/
912		serverhide {
913		/*
914	+	* disable_remote_commands: disable users issuing commands
915	+	* on remote servers.
916	+	*/
917	+	disable_remote_commands = no;
918	+
919	+	/*
920		* flatten_links: this option will show all servers in /links appear
921	<	* that they are linked to this current server.
921	>	* as though they are linked to this current server.
922		*/
923		flatten_links = no;
924
#	Line 885 | Line 953 | serverhide {
953
954		/*
955		* hide_server_ips: If this is disabled, opers will be unable to see
956	<	* servers ips and will be shown a masked ip, admins will be shown the
957	<	* real ip.
956	>	* servers' IP addresses and will be shown a masked IP address; admins
957	>	* will be shown the real IP address.
958		*
959	<	* If this is enabled, nobody can see a servers ip. *This is a kludge*,
960	<	* it has the side effect of hiding the ips everywhere, including
961	<	* logfiles.
959	>	* If this is enabled, nobody can see a server's IP address.
960	>	* *This is a kludge*: it has the side effect of hiding the IP addresses
961	>	* everywhere, including logfiles.
962		*
963		* We recommend you leave this disabled, and just take care with who you
964		* give administrator privileges to.
#	Line 903 | Line 971 | serverhide {
971		* compiled in options in config.h
972		*/
973		general {
974	+	/*
975	+	* cycle_on_host_change: sends a fake QUIT/JOIN combination
976	+	* when services change the hostname of a specific client.
977	+	*/
978	+	cycle_on_host_change = yes;
979	+
980		/* services_name: servername of nick/channel services */
981		services_name = "service.someserver";
982
983		/* max_watch: maximum WATCH entries a client can have. */
984	<	max_watch = 60;
984	>	max_watch = 30;
985
986	<	/* gline_enable: enable glines, network wide temp klines. */
986	>	/* max_accept: maximum allowed /accept's for +g usermode. */
987	>	max_accept = 30;
988	>
989	>	/* gline_enable: enable glines (network-wide temporary klines). */
990		gline_enable = yes;
991
992		/*
#	Line 937 | Line 1014 | general {
1014		gline_min_cidr6 = 48;
1015
1016		/*
1017	<	* Whether to automatically set mode +i on connecting users.
1017	>	* invisible_on_connect: whether to automatically set mode +i on
1018	>	* connecting users.
1019		*/
1020		invisible_on_connect = yes;
1021
1022		/*
1023	<	* kill_chase_time_limit: maximum time from the nickname change that
1024	<	* still causes KILL automatically to switch for the current nick of
1025	<	* that user.
1023	>	* kill_chase_time_limit: KILL chasing is a feature whereby a KILL
1024	>	* issued for a user who has recently changed nickname will be applied
1025	>	* automatically to the new nick. kill_chase_time_limit is the maximum
1026	>	* time following a nickname change that this chasing will apply.
1027		*/
1028	<	kill_chase_time_limit = 90 seconds;
1028	>	kill_chase_time_limit = 30 seconds;
1029
1030		/*
1031		* hide_spoof_ips: if disabled, opers will be allowed to see the real
1032	<	* IP of spoofed users in /trace etc. If this is defined they will be
1033	<	* shown a masked IP.
1032	>	* IP address of spoofed users in /trace etc. If this is defined they
1033	>	* will be shown a masked IP.
1034		*/
1035		hide_spoof_ips = yes;
1036
#	Line 969 | Line 1048 | general {
1048		*/
1049		disable_auth = no;
1050
972	–	/* disable_remote_commands: disable users doing commands on remote servers. */
973	–	disable_remote_commands = no;
974	–
1051		/*
1052		* tkline_expire_notices: enables or disables temporary kline/xline
1053		* expire notices.
#	Line 980 | Line 1056 | general {
1056
1057		/*
1058		* default_floodcount: the default value of floodcount that is configurable
1059	<	* via /quote set floodcount. This is the amount of lines a user
1059	>	* via /quote set floodcount. This is the number of lines a user
1060		* may send to any other user/channel in one second.
1061		*/
1062		default_floodcount = 10;
1063
1064		/*
1065	<	* failed_oper_notice: send a notice to all opers on the server when
1065	>	* failed_oper_notice: send a notice to all opers on the server when
1066		* someone tries to OPER and uses the wrong password, host or ident.
1067		*/
1068		failed_oper_notice = yes;
1069
1070		/*
1071	<	* dots_in_ident: the amount of '.' characters permitted in an ident
1071	>	* dots_in_ident: the number of '.' characters permitted in an ident
1072		* reply before the user is rejected.
1073		*/
1074		dots_in_ident = 2;
1075
1076		/*
1077	<	* min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1078	<	* placed via the server. K-lines hand placed are exempt from limits.
1077	>	* min_nonwildcard: the minimum number of non-wildcard characters in
1078	>	* k/d/g lines placed via the server. K-lines hand-placed are exempt from
1079	>	* this limit.
1080		* Wildcard chars: '.', ':', '*', '?', '@', '!'
1081		*/
1082		min_nonwildcard = 4;
1083
1084		/*
1085	<	* min_nonwildcard_simple: the minimum non wildcard characters in
1086	<	* gecos bans. Wildcard chars: '*', '?'
1085	>	* min_nonwildcard_simple: the minimum number of non-wildcard characters
1086	>	* in gecos bans. Wildcard chars: '*', '?'
1087		*/
1088		min_nonwildcard_simple = 3;
1089
1013	–	/* max_accept: maximum allowed /accept's for +g usermode. */
1014	–	max_accept = 20;
1015	–
1090		/* anti_nick_flood: enable the nickflood control code. */
1091		anti_nick_flood = yes;
1092
1093	<	/* nick flood: the nick changes allowed in the specified period */
1093	>	/* nick flood: the number of nick changes allowed in the specified period */
1094		max_nick_time = 20 seconds;
1095		max_nick_changes = 5;
1096
#	Line 1027 | Line 1101 | general {
1101		anti_spam_exit_message_time = 5 minutes;
1102
1103		/*
1104	<	* ts delta: the time delta allowed between server clocks before
1105	<	* a warning is given, or before the link is dropped. All servers
1106	<	* should run ntpdate/rdate to keep clocks in sync
1104	>	* ts_warn_delta, ts_max_delta: the time delta allowed between server
1105	>	* clocks before a warning is given, or before the link is dropped.
1106	>	* All servers should run ntpdate/rdate to keep clocks in sync
1107		*/
1108	<	ts_warn_delta = 30 seconds;
1109	<	ts_max_delta = 5 minutes;
1108	>	ts_warn_delta = 10 seconds;
1109	>	ts_max_delta = 2 minutes;
1110
1111		/*
1112	<	* warn_no_nline: warn opers about servers that try to connect but
1113	<	* we don't have a connect {} block for. Twits with misconfigured
1114	<	* servers can get really annoying with this enabled.
1112	>	* warn_no_connect_block: warn opers about servers that try to connect
1113	>	* but for which we don't have a connect {} block. Twits with
1114	>	* misconfigured servers can become really annoying with this enabled.
1115		*/
1116	<	warn_no_nline = yes;
1116	>	warn_no_connect_block = yes;
1117
1118		/*
1119		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
#	Line 1049 | Line 1123 | general {
1123		*/
1124		stats_e_disabled = no;
1125
1126	<	/* stats_o_oper only: make stats o (opers) oper only */
1126	>	/* stats_o_oper_only: make stats o (opers) oper only */
1127		stats_o_oper_only = yes;
1128
1129		/* stats_P_oper_only: make stats P (ports) oper only */
1130		stats_P_oper_only = yes;
1131
1132	+	/* stats_u_oper_only: make stats u (uptime) oper only */
1133	+	stats_u_oper_only = no;
1134	+
1135		/*
1136	<	* stats i oper only: make stats i (auth {}) oper only. Set to:
1136	>	* stats_i_oper_only: make stats i (auth {}) oper only. Set to:
1137		*     yes    - show users no auth blocks, made oper only.
1138	<	*     masked - show users first matching auth block
1138	>	*     masked - show users the first matching auth block
1139		*     no     - show users all auth blocks.
1140		*/
1141		stats_i_oper_only = yes;
#	Line 1066 | Line 1143 | general {
1143		/*
1144		* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1145		*     yes    - show users no auth blocks, made oper only
1146	<	*     masked - show users first matching auth block
1146	>	*     masked - show users the first matching auth block
1147		*     no     - show users all auth blocks.
1148		*/
1149		stats_k_oper_only = yes;
#	Line 1084 | Line 1161 | general {
1161		opers_bypass_callerid = no;
1162
1163		/*
1164	<	* pace_wait_simple: time between use of less intensive commands
1165	<	* (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1164	>	* pace_wait_simple: minimum time required between use of less
1165	>	* intensive commands
1166	>	* (ADMIN, HELP, LUSERS, VERSION, remote WHOIS)
1167		*/
1168		pace_wait_simple = 1 second;
1169
1170		/*
1171	<	* pace_wait: time between more intensive commands
1172	<	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1171	>	* pace_wait: minimum time required between use of more intensive commands
1172	>	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, WHOWAS)
1173		*/
1174		pace_wait = 10 seconds;
1175
1176		/*
1177	<	* short_motd: send clients a notice telling them to read the motd
1178	<	* instead of forcing a motd to clients who may simply ignore it.
1177	>	* short_motd: send clients a notice telling them to read the MOTD
1178	>	* instead of forcing an MOTD to clients who may simply ignore it.
1179		*/
1180		short_motd = no;
1181
#	Line 1119 | Line 1197 | general {
1197		/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1198		oper_pass_resv = yes;
1199
1200	<	/* REMOVE ME.  The following line checks you've been reading. */
1200	>	/* REMOVE ME. The following line checks that you have been reading. */
1201		havent_read_conf = 1;
1202
1203		/*
1204	<	* max_targets: the maximum amount of targets in a single
1204	>	* max_targets: the maximum number of targets in a single
1205		* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1206		*/
1207		max_targets = 4;
#	Line 1133 | Line 1211 | general {
1211		*
1212		* +b - bots         - See bot and drone flooding notices
1213		* +c - cconn        - Client connection/quit notices
1136	–	* +C - cconn_full   - Client connection/quit notices full
1214		* +D - deaf         - Don't receive channel messages
1215		* +d - debug        - See debugging notices
1216		* +e - external     - See remote server connection and split notices
#	Line 1142 | Line 1219 | general {
1219		* +G - softcallerid - Server Side Ignore for users not on your channels
1220		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1221		* +H - hidden       - Hides operator status to other users
1222	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
1146	<	*                     a channel
1222	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
1223		* +j - rej          - See rejected client notices
1224		* +k - skill        - See server generated KILL messages
1225		* +l - locops       - See LOCOPS messages
1226		* +n - nchange      - See client nick changes
1227	+	* +p - hidechans    - Hides channel list in WHOIS
1228	+	* +q - hideidle     - Hides idle and signon time in WHOIS
1229		* +R - nononreg     - Only receive private messages from registered clients
1230		* +s - servnotice   - See general server notices
1231		* +u - unauth       - See unauthorized client notices
1232		* +w - wallop       - See server generated WALLOPS
1233		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1156	–	* +z - operwall     - See oper generated WALLOPS
1234		*/
1235
1236		/* oper_only_umodes: usermodes only opers may set */
1237	<	oper_only_umodes = bots, cconn, cconn_full, debug, full, hidden, skill,
1238	<	nchange, rej, spy, external, operwall,
1239	<	locops, unauth, farconnect;
1237	>	oper_only_umodes = bots, cconn, debug, full, hidden, skill,
1238	>	nchange, rej, spy, external,
1239	>	locops, unauth, farconnect;
1240
1241		/* oper_umodes: default usermodes opers get when they /oper */
1242	<	oper_umodes = bots, locops, servnotice, operwall, wallop;
1242	>	oper_umodes = bots, locops, servnotice, wallop;
1243
1244		/*
1245		* use_egd: if your system does not have *random devices yet you
#	Line 1177 | Line 1254 | general {
1254		*/
1255		#       egdpool_path = "/var/run/egd-pool";
1256
1257	+
1258		/*
1259	<	* throttle_time: the minimum amount of time between connections from
1260	<	* the same ip. exempt {} blocks are excluded from this throttling.
1259	>	* throttle_count: the maximum number of connections from the same
1260	>	* IP address allowed in throttle_time duration.
1261	>	*/
1262	>	throttle_count = 1;
1263	>
1264	>	/*
1265	>	* throttle_time: the minimum amount of time required between
1266	>	* connections from the same IP address. exempt {} blocks are
1267	>	* excluded from this throttling.
1268		* Offers protection against flooders who reconnect quickly.
1269		* Set to 0 to disable.
1270		*/
1271	<	throttle_time = 10;
1271	>	throttle_time = 2 seconds;
1272		};
1273
1274		modules {
#	Line 1195 | Line 1280 | modules {
1280		path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1281
1282		/* module: the name of a module to load on startup/rehash. */
1283	<	#module = "some_module.la";
1283	>	#       module = "some_module.la";
1284		};
1285
1286		/*
#	Line 1207 | Line 1292 | log {
1292
1293		file {
1294		type = oper;
1295	<	name = "/home/ircd/var/log/oper.log";
1295	>	name = "/usr/local/ircd/var/log/oper.log";
1296		size = unlimited;
1297		};
1298
1299		file {
1300		type = user;
1301	<	name = "/home/ircd/var/log/user.log";
1301	>	name = "/usr/local/ircd/var/log/user.log";
1302		size = 50 megabytes;
1303		};
1304
1305		file {
1306		type = kill;
1307	<	name = "/home/ircd/var/log/kill.log";
1307	>	name = "/usr/local/ircd/var/log/kill.log";
1308		size = 50 megabytes;
1309		};
1310
1311		file {
1312		type = kline;
1313	<	name = "/home/ircd/var/log/kline.log";
1313	>	name = "/usr/local/ircd/var/log/kline.log";
1314		size = 50 megabytes;
1315		};
1316
1317		file {
1318		type = dline;
1319	<	name = "/home/ircd/var/log/dline.log";
1319	>	name = "/usr/local/ircd/var/log/dline.log";
1320		size = 50 megabytes;
1321		};
1322
1323		file {
1324		type = gline;
1325	<	name = "/home/ircd/var/log/gline.log";
1325	>	name = "/usr/local/ircd/var/log/gline.log";
1326	>	size = 50 megabytes;
1327	>	};
1328	>
1329	>	file {
1330	>	type = xline;
1331	>	name = "/usr/local/ircd/var/log/xline.log";
1332	>	size = 50 megabytes;
1333	>	};
1334	>
1335	>	file {
1336	>	type = resv;
1337	>	name = "/usr/local/ircd/var/log/resv.log";
1338		size = 50 megabytes;
1339		};
1340
1341		file {
1342		type = debug;
1343	<	name = "/home/ircd/var/log/debug.log";
1343	>	name = "/usr/local/ircd/var/log/debug.log";
1344		size = 50 megabytes;
1345		};
1346		};

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)