ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/doc/reference.conf

Comparing:
ircd-hybrid-8/doc/example.conf (file contents), Revision 1547 by michael, Sun Sep 30 17:50:03 2012 UTC vs.
ircd-hybrid/trunk/doc/reference.conf (file contents), Revision 2150 by michael, Fri May 31 18:39:43 2013 UTC

#	Line 1 | Line 1
1	<	/* doc/example.conf - ircd-hybrid-8 Example configuration file
2	<	* Copyright (C) 2000-2012 Hybrid Development Team
1	>	/* ircd-hybrid reference configuration file
2	>	* Copyright (C) 2000-2013 Hybrid Development Team
3		*
4		* Written by ejb, wcampbel, db, leeh and others
5	–	* Other example configurations can be found in the source dir under
6	–	* doc/.
5		*
6		* $Id$
7		*/
8
9	<	/* IMPORTANT NOTES:
9	>	/*
10	>	* ########################################################################
11	>	* IMPORTANT NOTES:
12		*
13		* auth {} blocks MUST be specified in order of precedence.  The first one
14		* that matches a user will be used.  So place spoofs first, then specials,
15		* then general access.
16	+	* ########################################################################
17		*
18		* Shell style (#), C++ style (//) and C style comments are supported.
19		*
#	Line 24 | Line 25
25		*        12 hours 30 minutes 1 second
26		*
27		* Valid units of time:
28	<	*        month, week, day, hour, minute, second
28	>	*        year, month, week, day, hour, minute, second
29		*
30		* Valid units of size:
31		*        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
#	Line 32 | Line 33
33		* Sizes and times may be singular or plural.
34		*/
35
36	<	/* EFNET NOTE:
36	<	*
37	<	* This config file is NOT suitable for EFNet.  EFNet admins should use
38	<	* example.efnet.conf
39	<	*/
40	<
36	>
37		/*
38		* serverinfo {}:  contains information about the server
39		*/
#	Line 51 | Line 47 | serverinfo {
47		* sid: a server's unique ID.  This is three characters long and must
48		* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	<	* NOTE: The letters must be capitalized.  This cannot be changed at runtime.
50	>	* NOTE: The letters must be capitalized. This cannot be changed at runtime.
51		*/
52	<	sid = "_CHANGE_ME_";
52	>	sid = "0HY";
53
54		/*
55		* description: the description of the server.
#	Line 62 | Line 58 | serverinfo {
58
59		/*
60		* network info: the name and description of the network this server
61	<	* is on.  Shown in the 005 reply and used with serverhiding.
61	>	* is on. Shown in the 005 reply and used with serverhiding.
62		*/
63		network_name = "MyNet";
64		network_desc = "This is My Network";
#	Line 85 | Line 81 | serverinfo {
81		*/
82		#vhost6 = "3ffe:80e8:546::2";
83
84	<	/* max_clients: the maximum number of clients allowed to connect */
84	>	/* max_clients: the maximum number of clients allowed to connect. */
85		max_clients = 512;
86
87		/*
88	+	* max_nick_length: only applies to local clients. Must be in the
89	+	* range of 9 to 30. Default is 9 if nothing else is specified.
90	+	*/
91	+	max_nick_length = 9;
92	+
93	+	/*
94	+	* max_topic_length: only applies to topics set by local clients.
95	+	* Must be in the range of 80 to 300. Default is 80 if nothing
96	+	* else is specified.
97	+	*/
98	+	max_topic_length = 160;
99	+
100	+	/*
101		* rsa_private_key_file: the path to the file containing our
102		* rsa key for cryptlink.
103		*
#	Line 108 | Line 117 | serverinfo {
117		* ssl certificate for encrypted client connection.
118		*
119		* This assumes your private RSA key is stored in rsa.key. You
120	<	* MUST have an RSA key in order to generate the certificate
120	>	* MUST have an RSA key in order to generate the certificate.
121	>	*
122	>	* Example command:
123		*
124		*      openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
125		*
#	Line 148 | Line 159 | serverinfo {
159		* If a client (which also includes incoming server connections) isn't
160		* capable of any cipher listed below, the connection will simply be
161		* rejected.
162	+	*
163		* A list of supported ciphers can be obtained by running:
164		*
165		*      openssl ciphers -ssl3 -tls1 -v
#	Line 182 | Line 194 | admin {
194		* class {}:  contains information about classes for users
195		*/
196		class {
197	<	/* name: the name of the class */
197	>	/* name: the name of the class. */
198		name = "users";
199
200		/*
#	Line 215 | Line 227 | class {
227
228		/*
229		* the following lines are optional and allow you to define
230	<	* how many users can connect from one /NN subnet
230	>	* how many users can connect from one /NN subnet.
231		*/
232		cidr_bitlen_ipv4 = 24;
233		cidr_bitlen_ipv6 = 120;
#	Line 241 | Line 253 | class {
253		number_per_ip = 10;
254		max_number = 100;
255		sendq = 100 kbytes;
256	+
257	+	/*
258	+	* min_idle: minimum idle time that is shown in /whois.
259	+	*/
260	+	min_idle = 3 hours;
261	+
262	+	/*
263	+	* max_idle: maximum idle time that is shown in /whois.
264	+	*/
265	+	max_idle = 8 hours;
266	+
267	+	/*
268	+	* flags:
269	+	*
270	+	* random_idle          - idle time is randomly selected within the
271	+	*                        range of min_idle to max_idle
272	+	* hide_idle_from_opers - fake idle time will be shown to operators, too
273	+	*/
274	+	flags = random_idle, hide_idle_from_opers;
275		};
276
277		class {
#	Line 248 | Line 279 | class {
279		ping_time = 90 seconds;
280
281		/*
282	<	* ping_warning: how fast a server must reply to a PING before
252	<	* a warning to opers is generated.
253	<	*/
254	<	ping_warning = 15 seconds;
255	<
256	<	/*
257	<	* connectfreq: only used in server classes.  Specifies the delay
282	>	* connectfreq: only used in server classes. Specifies the delay
283		* between autoconnecting to servers.
284		*/
285		connectfreq = 5 minutes;
286
287	<	/* max number: the amount of servers to autoconnect to */
287	>	/* max number: the amount of servers to autoconnect to. */
288		max_number = 1;
289
290	<	/* sendq: servers need a higher sendq as they send more data */
290	>	/* sendq: servers need a higher sendq as they send more data. */
291		sendq = 2 megabytes;
292		};
293
294		/*
295	+	* motd {}: specifies various MOTD files. Applies to local users only.
296	+	*/
297	+	motd {
298	+	/*
299	+	* mask: multiple mask entries are permitted. Mask can either be
300	+	* a class name or a hostname.
301	+	*/
302	+	mask = "*.at";
303	+	mask = "*.de";
304	+	mask = "*.ch";
305	+
306	+	/*
307	+	* file: path top the actual motd file.
308	+	*/
309	+	file = "/usr/local/ircd/etc/german.motd";
310	+	};
311	+
312	+	/*
313		* listen {}:  contains information about the ports ircd listens on
314		*/
315		listen {
316		/*
317	<	* port: the specific port to listen on.  If no host is specified
317	>	* port: the specific port to listen on. If no host is specified
318		* before, it will listen on all available IPs.
319		*
320		* Ports are separated via a comma, a range may be specified using ".."
#	Line 284 | Line 327 | listen {
327		* Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
328		* unless you are an administrator.
329		*
330	<	* NOTE: The "flags" directive has to come before "port".  Always!
330	>	* NOTE: The "flags" directive has to come before "port". Always!
331		*
332		* Currently available flags are:
333		*
334	<	*  ssl    - Port is for SSL client connections only
334	>	*  ssl    - Port may only accept TLS/SSL connections
335		*  server - Only server connections are permitted
336		*  hidden - Port is hidden from /stats P, unless you're an admin
337		*/
#	Line 298 | Line 341 | listen {
341
342		/*
343		* host: set a specific IP/host the ports after the line will listen
344	<	* on.  This may be ipv4 or ipv6.
344	>	* on. This may be ipv4 or ipv6.
345		*/
346		host = "1.2.3.4";
347		port = 7000, 7001;
#	Line 328 | Line 371 | auth {
371		encrypted = yes;
372
373		/*
374	<	* spoof: fake the users host to this.  This is free-form,
375	<	* just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
374	>	* spoof: fake the users host to this. This is free-form, just do
375	>	* everyone a favor and don't abuse it. ('=' prefix on /stats I)
376		*/
377		spoof = "I.still.hate.packets";
378
#	Line 348 | Line 391 | auth {
391		* resv_exempt   - exempt this user from resvs ('$' prefix on /stats I)
392		* no_tilde      - remove ~ from a user with no ident ('-' prefix on /stats I)
393		* can_flood     - allow this user to exceed flood limits ('|' prefix on /stats I)
394	+	* webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
395	+	*                 ('<' prefix on /stats I)
396		*/
397		flags = need_password, spoof_notice, exceed_limit, kline_exempt,
398		gline_exempt, resv_exempt, no_tilde, can_flood;
#	Line 355 | Line 400 | auth {
400
401		auth {
402		/*
403	<	* redirect: the server and port to redirect a user to.  A user does
404	<	* not have to obey the redirection, the ircd just suggests an alternative
403	>	* redirect: the server and port to redirect a user to. A user does not
404	>	* have to obey the redirection, the ircd just suggests an alternative
405		* server for them.
406		*/
407		redirserv = "this.is.not.a.real.server";
#	Line 376 | Line 421 | auth {
421
422		/*
423		* operator {}:  defines ircd operators
379	–	*
380	–	* ircd-hybrid no longer supports local operators, privileges are
381	–	* controlled via flags.
424		*/
425		operator {
426		/* name: the name of the oper */
#	Line 392 | Line 434 | operator {
434		user = "*@127.0.0.0/8";
435
436		/*
437	<	* password: the password required to oper.  By default this will
437	>	* password: the password required to oper. By default this will
438		* need to be encrypted by using the provided mkpasswd tool.
439		* Several password hash algorithms are available depending
440		* on your system's crypt() implementation. For example, a modern
#	Line 418 | Line 460 | operator {
460		class = "opers";
461
462		/*
463	<	* umodes: default usermodes opers get when they /oper.  If defined,
463	>	* umodes: default usermodes opers get when they /oper. If defined,
464		* it will override oper_umodes settings in general {}.
465		* Available usermodes:
466		*
#	Line 427 | Line 469 | operator {
469		* +C - cconn_full   - Client connection/quit notices full
470		* +D - deaf         - Don't receive channel messages
471		* +d - debug        - See debugging notices
472	+	* +e - external     - See remote server connection and split notices
473	+	* +F - farconnect   - Remote client connection/quit notices
474		* +f - full         - See auth{} block full notices
475		* +G - softcallerid - Server Side Ignore for users not on your channels
476		* +g - callerid     - Server Side Ignore (for privmsgs etc)
#	Line 437 | Line 481 | operator {
481		* +k - skill        - See server generated KILL messages
482		* +l - locops       - See LOCOPS messages
483		* +n - nchange      - See client nick changes
484	+	* +R - nononreg     - Only receive private messages from registered clients
485		* +s - servnotice   - See general server notices
486		* +u - unauth       - See unauthorized client notices
487		* +w - wallop       - See server generated WALLOPS
443	–	* +x - external     - See remote server connection and split notices
488		* +y - spy          - See LINKS, STATS, TRACE notices etc.
489		* +z - operwall     - See oper generated WALLOPS
490		*/
#	Line 451 | Line 495 | operator {
495		* allowed to do on the server. All options default to no.
496		* Available options:
497		*
498	<	* module       - allows MODULE
499	<	* global_kill  - allows remote users to be /KILL'd
500	<	* remote       - allows remote SQUIT and CONNECT
501	<	* remoteban    - allows remote KLINE/UNKLINE
502	<	* dline        - allows DLINE
503	<	* undline      - allows UNDLINE
504	<	* kline        - allows KILL and KLINE
505	<	* unkline      - allows UNKLINE
506	<	* gline        - allows GLINE
507	<	* xline        - allows XLINE
508	<	* globops      - allows GLOBOPS
509	<	* operwall     - allows OPERWALL
510	<	* nick_changes - allows oper to see nickchanges via usermode +n
511	<	* rehash       - allows oper to REHASH config
512	<	* die          - allows DIE
513	<	* restart      - allows RESTART
514	<	* set          - allows SET
515	<	* admin        - gives admin privileges. admins for example,
516	<	*                may see the real IP addresses of servers.
498	>	* module         - allows MODULE
499	>	* connect        - allows local CONNECT              | ('P' flag)
500	>	* connect:remote - allows remote CONNECT             | ('Q' flag)
501	>	* squit          - allows local SQUIT                | ('R' flag)
502	>	* squit:remote   - allows remote SQUIT               | ('S' flag)
503	>	* kill           - allows to KILL local clients      | ('N' flag)
504	>	* kill:remote    - allows remote users to be /KILL'd | ('O' flag)
505	>	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
506	>	* dline          - allows DLINE                      |
507	>	* undline        - allows UNDLINE                    |
508	>	* kline          - allows KLINE                      | ('K' flag)
509	>	* unkline        - allows UNKLINE                    | ('U' flag)
510	>	* gline          - allows GLINE                      | ('G' flag)
511	>	* xline          - allows XLINE                      | ('X' flag)
512	>	* locops         - allows LOCOPS                     |
513	>	* globops        - allows GLOBOPS                    |
514	>	* wallops        - allows WALLOPS                    |
515	>	* operwall       - allows OPERWALL                   | ('L' flag)
516	>	* rehash         - allows oper to REHASH config      | ('H' flag)
517	>	* die            - allows DIE                        | ('D' flag)
518	>	* restart        - allows RESTART                    |
519	>	* set            - allows SET                        |
520	>	* admin          - gives administrator privileges    | ('A' flag)
521		*/
522	<	flags = global_kill, remote, kline, unkline, xline, globops, restart,
523	<	die, rehash, nick_changes, admin, operwall, module;
522	>	flags = kill, kill:remote, connect, connect:remote, kline, unkline,
523	>	xline, globops, restart, die, rehash, admin, operwall, module;
524		};
525
526	+	/*
527	+	* service {}: specifies what server may act as a network service
528	+	*
529	+	* NOTE: it is absolutely important that every single server on the network
530	+	*       has the same service{} block.
531	+	*/
532		service {
533		name = "service.someserver";
534		name = "stats.someserver";
#	Line 488 | Line 542 | connect {
542		name = "irc.uplink.com";
543
544		/*
545	<	* host: the host or IP to connect to.  If a hostname is used it
545	>	* host: the host or IP to connect to. If a hostname is used it
546		* must match the reverse dns of the server.
547		*/
548		host = "192.168.0.1";
#	Line 517 | Line 571 | connect {
571		port = 6666;
572
573		/*
574	<	* hub_mask: the mask of servers that this server may hub.  Multiple
575	<	* entries are permitted
574	>	* hub_mask: the mask of servers that this server may hub. Multiple
575	>	* entries are permitted.
576		*/
577		hub_mask = "*";
578
579		/*
580	<	* leaf_mask: the mask of servers this server may not hub.  Multiple
581	<	* entries are permitted.  Useful for forbidding EU -> US -> EU routes.
580	>	* leaf_mask: the mask of servers this server may not hub. Multiple
581	>	* entries are permitted. Useful for forbidding EU -> US -> EU routes.
582		*/
583		#       leaf_mask = "*.uk";
584
#	Line 607 | Line 661 | cluster {
661		*
662		* NOTE: This can be effectively used for remote klines.
663		*       Please note that there is no password authentication
664	<	*       for users setting remote klines.  You must also be
664	>	*       for users setting remote klines. You must also be
665		*       /oper'd in order to issue a remote kline.
666		*/
667		shared {
668		/*
669	<	* name: the server the user must be on to set klines.  If this is not
669	>	* name: the server the user must be on to set klines. If this is not
670		* specified, the user will be allowed to kline from all servers.
671		*/
672		name = "irc2.some.server";
673
674		/*
675	<	* user: the user@host mask that is allowed to set klines.  If this is
675	>	* user: the user@host mask that is allowed to set klines. If this is
676		* not specified, all users on the server above will be allowed to set
677		* a remote kline.
678		*/
#	Line 649 | Line 703 | kill {
703		reason = "Obviously hacked account";
704		};
705
652	–	kill {
653	–	user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
654	–
655	–	/*
656	–	* NOTE: You have to set type=regex; when using a regular expression
657	–	* based user entry
658	–	*/
659	–	type = regex;
660	–	};
661	–
706		/*
707		* deny {}:  IPs that are not allowed to connect (before DNS/ident lookup)
708		* Oper issued dlines will be added to the specified dline config
#	Line 669 | Line 713 | deny {
713		};
714
715		/*
716	<	* exempt {}: IPs that are exempt from deny {} and Dlines
716	>	* exempt {}:  IPs that are exempt from deny {} and Dlines
717		*/
718		exempt {
719		ip = "192.168.0.0/16";
#	Line 678 | Line 722 | exempt {
722		/*
723		* resv {}:  nicks and channels users may not use/join
724		*/
725	+	resv { mask = "clone*"; reason = "Clone bots"; };
726	+	resv { mask = "ChanServ"; reason = "Reserved for services"; };
727	+	resv { mask = "NickServ"; reason = "Reserved for services"; };
728	+	resv { mask = "OperServ"; reason = "Reserved for services"; };
729	+	resv { mask = "MemoServ"; reason = "Reserved for services"; };
730	+	resv { mask = "BotServ"; reason = "Reserved for services"; };
731	+	resv { mask = "HelpServ"; reason = "Reserved for services"; };
732	+	resv { mask = "HostServ"; reason = "Reserved for services"; };
733	+	resv { mask = "StatServ"; reason = "Reserved for services"; };
734	+	resv { mask = "#*services*"; reason = "Reserved for services"; };
735	+
736		resv {
737	<	/* reason: the reason for the proceeding resv's */
738	<	reason = "Reserved for services";
737	>	/*
738	>	* mask: masks starting with a '#' are automatically considered
739	>	* as channel name mask.
740	>	*/
741	>	mask = "#helsinki";
742	>	reason = "Channel is reserved for finnish inhabitants";
743
744	<	/* resv: the nicks and channels users may not join/use */
745	<	nick = "Global";
746	<	nick = "DevNull";
747	<	nick = "BotServ";
748	<	nick = "Services";
749	<	nick = "StatServ";
691	<	nick = "HelpServ";
692	<	nick = "HostServ";
693	<	nick = "NickServ";
694	<	nick = "ChanServ";
695	<	nick = "MemoServ";
696	<	nick = "OperServ";
697	<	channel = "#services";
698	<
699	<	/* resv: wildcard masks are also supported in nicks only */
700	<	reason = "Clone bots";
701	<	nick = "clone*";
744	>	/*
745	>	* exempt: can be either a ISO 3166 alpha-2 two letter country
746	>	* code, or a nick!user@host mask. CIDR is supported. Exempt
747	>	* entries can be stacked.
748	>	*/
749	>	exempt = "FI";
750		};
751
752		/*
753	<	* gecos {}:  The X: replacement, used for banning users based on
706	<	* their "realname".
753	>	* gecos {}:  Used for banning users based on their "realname".
754		*/
755		gecos {
756		name = "*sex*";
#	Line 715 | Line 762 | gecos {
762		reason = "Trojan drone";
763		};
764
718	–	gecos {
719	–	name = "*http*";
720	–	reason = "Spambot";
721	–	};
722	–
723	–	gecos {
724	–	name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
725	–
726	–	/*
727	–	* NOTE: You have to set type=regex; when using a regular expression
728	–	* based name entry
729	–	*/
730	–	type = regex;
731	–	};
732	–
765		/*
766		* channel {}:  The channel block contains options pertaining to channels
767		*/
#	Line 750 | Line 782 | channel {
782		disable_fake_channels = yes;
783
784		/*
753	–	* restrict_channels: reverse channel RESVs logic, only reserved
754	–	* channels are allowed
755	–	*/
756	–	restrict_channels = no;
757	–
758	–	/*
785		* knock_delay: The amount of time a user must wait between issuing
786		* the knock command.
787		*/
#	Line 779 | Line 805 | channel {
805		*/
806		max_chans_per_oper = 50;
807
782	–	/* quiet_on_ban: stop banned people talking in channels. */
783	–	quiet_on_ban = yes;
784	–
808		/* max_bans: maximum number of +b/e/I modes in a channel */
809		max_bans = 100;
810
#	Line 803 | Line 826 | channel {
826
827		/*
828		* default_split_user_count: when the usercount is lower than this level,
829	<	* consider ourselves split.  This must be set for automatic splitmode.
829	>	* consider ourselves split. This must be set for automatic splitmode.
830		*/
831		default_split_user_count = 0;
832
833		/*
834		* default_split_server_count: when the servercount is lower than this,
835	<	* consider ourselves split.  This must be set for automatic splitmode.
835	>	* consider ourselves split. This must be set for automatic splitmode.
836		*/
837		default_split_server_count = 0;
838
#	Line 827 | Line 850 | channel {
850		serverhide {
851		/*
852		* flatten_links: this option will show all servers in /links appear
853	<	* that they are linked to this current server
853	>	* that they are linked to this current server.
854		*/
855		flatten_links = no;
856
#	Line 839 | Line 862 | serverhide {
862
863		/*
864		* hidden: hide this server from a /links output on servers that
865	<	* support it.  This allows hub servers to be hidden etc.
865	>	* support it. This allows hub servers to be hidden etc.
866		*/
867		hidden = no;
868
#	Line 850 | Line 873 | serverhide {
873		hide_servers = no;
874
875		/*
876	+	* hide_services: define this if you want to hide the location of
877	+	* services servers that are specified in the service{} block.
878	+	*/
879	+	hide_services = no;
880	+
881	+	/*
882		* Use this as the servername users see if hide_servers = yes.
883		*/
884		hidden_name = "*.hidden.com";
#	Line 864 | Line 893 | serverhide {
893		* logfiles.
894		*
895		* We recommend you leave this disabled, and just take care with who you
896	<	* give admin=yes; to.
896	>	* give administrator privileges to.
897		*/
898		hide_server_ips = no;
899		};
900
901		/*
902		* general {}:  The general block contains many of the options that were once
903	<	* compiled in options in config.h.  The general block is read at start time.
903	>	* compiled in options in config.h
904		*/
905		general {
906		/* services_name: servername of nick/channel services */
#	Line 880 | Line 909 | general {
909		/* max_watch: maximum WATCH entries a client can have. */
910		max_watch = 60;
911
912	<	/* gline_enable: enable glines, network wide temp klines */
912	>	/* gline_enable: enable glines, network wide temp klines. */
913		gline_enable = yes;
914
915		/*
916		* gline_duration: the amount of time a gline will remain on your
917	<	* server before expiring
917	>	* server before expiring.
918		*/
919		gline_duration = 1 day;
920
921		/*
922	<	* gline_request_duration:  how long a pending G-line can be around.
923	<	* 10 minutes should be plenty
922	>	* gline_request_duration: how long a pending G-line can be around.
923	>	* 10 minutes should be plenty.
924		*/
925		gline_request_duration = 10 minutes;
926
927		/*
928		* gline_min_cidr: the minimum required length of a CIDR bitmask
929	<	* for IPv4 based glines
929	>	* for IPv4 based glines.
930		*/
931		gline_min_cidr = 16;
932
933		/*
934		* gline_min_cidr6: the minimum required length of a CIDR bitmask
935	<	* for IPv6 based glines
935	>	* for IPv6 based glines.
936		*/
937		gline_min_cidr6 = 48;
938
#	Line 913 | Line 942 | general {
942		invisible_on_connect = yes;
943
944		/*
945	<	* Max time from the nickname change that still causes KILL
946	<	* automatically to switch for the current nick of that user.
945	>	* kill_chase_time_limit: maximum time from the nickname change that
946	>	* still causes KILL automatically to switch for the current nick of
947	>	* that user.
948		*/
949		kill_chase_time_limit = 90 seconds;
950
951		/*
952	<	* If hide_spoof_ips is disabled, opers will be allowed to see the real
952	>	* hide_spoof_ips: if disabled, opers will be allowed to see the real
953		* IP of spoofed users in /trace etc. If this is defined they will be
954		* shown a masked IP.
955		*/
956		hide_spoof_ips = yes;
957
958		/*
959	<	* Ignore bogus timestamps from other servers.  Yes, this will desync
960	<	* the network, but it will allow chanops to resync with a valid non TS 0
959	>	* Ignore bogus timestamps from other servers. Yes, this will desync the
960	>	* network, but it will allow chanops to resync with a valid non TS 0
961		*
962		* This should be enabled network wide, or not at all.
963		*/
#	Line 939 | Line 969 | general {
969		*/
970		disable_auth = no;
971
972	<	/* disable_remote_commands: disable users doing commands on remote servers */
972	>	/* disable_remote_commands: disable users doing commands on remote servers. */
973		disable_remote_commands = no;
974
975		/*
#	Line 950 | Line 980 | general {
980
981		/*
982		* default_floodcount: the default value of floodcount that is configurable
983	<	* via /quote set floodcount.  This is the amount of lines a user
983	>	* via /quote set floodcount. This is the amount of lines a user
984		* may send to any other user/channel in one second.
985		*/
986		default_floodcount = 10;
#	Line 969 | Line 999 | general {
999
1000		/*
1001		* min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1002	<	* placed via the server.  klines hand placed are exempt from limits.
1003	<	* wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1002	>	* placed via the server. K-lines hand placed are exempt from limits.
1003	>	* Wildcard chars: '.', ':', '*', '?', '@', '!'
1004		*/
1005		min_nonwildcard = 4;
1006
1007		/*
1008		* min_nonwildcard_simple: the minimum non wildcard characters in
1009	<	* gecos bans.  wildcard chars: '*' '?' '#'
1009	>	* gecos bans. Wildcard chars: '*', '?'
1010		*/
1011		min_nonwildcard_simple = 3;
1012
1013	<	/* max_accept: maximum allowed /accept's for +g usermode */
1013	>	/* max_accept: maximum allowed /accept's for +g usermode. */
1014		max_accept = 20;
1015
1016	<	/* anti_nick_flood: enable the nickflood control code */
1016	>	/* anti_nick_flood: enable the nickflood control code. */
1017		anti_nick_flood = yes;
1018
1019		/* nick flood: the nick changes allowed in the specified period */
#	Line 998 | Line 1028 | general {
1028
1029		/*
1030		* ts delta: the time delta allowed between server clocks before
1031	<	* a warning is given, or before the link is dropped.  all servers
1031	>	* a warning is given, or before the link is dropped. All servers
1032		* should run ntpdate/rdate to keep clocks in sync
1033		*/
1034		ts_warn_delta = 30 seconds;
1035		ts_max_delta = 5 minutes;
1036
1037		/*
1008	–	* kline_with_reason: show the user the reason why they are k/d/glined
1009	–	* on exit.  May give away who set k/dline when set via tcm.
1010	–	*/
1011	–	kline_with_reason = yes;
1012	–
1013	–	/*
1014	–	* kline_reason: show this message to users on channel
1015	–	* instead of the oper reason.
1016	–	*/
1017	–	kline_reason = "Connection closed";
1018	–
1019	–	/*
1020	–	* reject_hold_time: wait this amount of time before disconnecting
1021	–	* a rejected client. Use 0 to disable.
1022	–	*/
1023	–	reject_hold_time = 0;
1024	–
1025	–	/*
1038		* warn_no_nline: warn opers about servers that try to connect but
1039	<	* we don't have a connect {} block for.  Twits with misconfigured
1039	>	* we don't have a connect {} block for. Twits with misconfigured
1040		* servers can get really annoying with this enabled.
1041		*/
1042		warn_no_nline = yes;
1043
1044		/*
1045		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1046	<	* operators and administrators.  Doing so is a good idea in case
1046	>	* operators and administrators. Doing so is a good idea in case
1047		* there are any exempted (exempt{}) server IPs you don't want to
1048		* see leaked.
1049		*/
#	Line 1044 | Line 1056 | general {
1056		stats_P_oper_only = yes;
1057
1058		/*
1059	<	* stats i oper only: make stats i (auth {}) oper only. set to:
1060	<	*     yes:    show users no auth blocks, made oper only.
1061	<	*     masked: show users first matching auth block
1062	<	*     no:     show users all auth blocks.
1059	>	* stats i oper only: make stats i (auth {}) oper only. Set to:
1060	>	*     yes    - show users no auth blocks, made oper only.
1061	>	*     masked - show users first matching auth block
1062	>	*     no     - show users all auth blocks.
1063		*/
1064		stats_i_oper_only = yes;
1065
1066		/*
1067	<	* stats_k_oper_only: make stats k/K (klines) oper only.  set to:
1068	<	*     yes:    show users no auth blocks, made oper only
1069	<	*     masked: show users first matching auth block
1070	<	*     no:     show users all auth blocks.
1067	>	* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1068	>	*     yes    - show users no auth blocks, made oper only
1069	>	*     masked - show users first matching auth block
1070	>	*     no     - show users all auth blocks.
1071		*/
1072		stats_k_oper_only = yes;
1073
#	Line 1100 | Line 1112 | general {
1112
1113		/*
1114		* true_no_oper_flood: completely eliminate flood limits for opers
1115	<	* and for clients with can_flood = yes in their auth {} blocks
1115	>	* and for clients with can_flood = yes in their auth {} blocks.
1116		*/
1117		true_no_oper_flood = yes;
1118
1119	<	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1119	>	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1120		oper_pass_resv = yes;
1121
1122		/* REMOVE ME.  The following line checks you've been reading. */
#	Line 1112 | Line 1124 | general {
1124
1125		/*
1126		* max_targets: the maximum amount of targets in a single
1127	<	* PRIVMSG/NOTICE.  Set to 999 NOT 0 for unlimited.
1127	>	* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1128		*/
1129		max_targets = 4;
1130
1131		/*
1120	–	* message_locale: the default message locale
1121	–	* Use "standard" for the compiled in defaults.
1122	–	* To install the translated messages, go into messages/ in the
1123	–	* source directory and run `make install'.
1124	–	*/
1125	–	message_locale = "standard";
1126	–
1127	–	/*
1132		* usermodes configurable: a list of usermodes for the options below
1133		*
1134		* +b - bots         - See bot and drone flooding notices
#	Line 1132 | Line 1136 | general {
1136		* +C - cconn_full   - Client connection/quit notices full
1137		* +D - deaf         - Don't receive channel messages
1138		* +d - debug        - See debugging notices
1139	+	* +e - external     - See remote server connection and split notices
1140	+	* +F - farconnect   - Remote client connection/quit notices
1141		* +f - full         - See auth{} block full notices
1142		* +G - softcallerid - Server Side Ignore for users not on your channels
1143		* +g - callerid     - Server Side Ignore (for privmsgs etc)
#	Line 1142 | Line 1148 | general {
1148		* +k - skill        - See server generated KILL messages
1149		* +l - locops       - See LOCOPS messages
1150		* +n - nchange      - See client nick changes
1151	+	* +R - nononreg     - Only receive private messages from registered clients
1152		* +s - servnotice   - See general server notices
1153		* +u - unauth       - See unauthorized client notices
1154		* +w - wallop       - See server generated WALLOPS
1148	–	* +x - external     - See remote server connection and split notices
1155		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1156		* +z - operwall     - See oper generated WALLOPS
1157		*/
#	Line 1153 | Line 1159 | general {
1159		/* oper_only_umodes: usermodes only opers may set */
1160		oper_only_umodes = bots, cconn, cconn_full, debug, full, hidden, skill,
1161		nchange, rej, spy, external, operwall,
1162	<	locops, unauth;
1162	>	locops, unauth, farconnect;
1163
1164		/* oper_umodes: default usermodes opers get when they /oper */
1165		oper_umodes = bots, locops, servnotice, operwall, wallop;
1166
1167		/*
1168		* use_egd: if your system does not have *random devices yet you
1169	<	* want to use OpenSSL and encrypted links, enable this.  Beware -
1170	<	* EGD is *very* CPU intensive when gathering data for its pool
1169	>	* want to use OpenSSL and encrypted links, enable this. Beware -
1170	>	* EGD is *very* CPU intensive when gathering data for its pool.
1171		*/
1172		#       use_egd = yes;
1173
#	Line 1173 | Line 1179 | general {
1179
1180		/*
1181		* throttle_time: the minimum amount of time between connections from
1182	<	* the same ip.  exempt {} blocks are excluded from this throttling.
1183	<	* Offers protection against flooders who reconnect quickly.
1182	>	* the same ip. exempt {} blocks are excluded from this throttling.
1183	>	* Offers protection against flooders who reconnect quickly.
1184		* Set to 0 to disable.
1185		*/
1186		throttle_time = 10;
#	Line 1188 | Line 1194 | modules {
1194		path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1195		path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1196
1197	<	/* module: the name of a module to load on startup/rehash */
1197	>	/* module: the name of a module to load on startup/rehash. */
1198		#module = "some_module.la";
1199		};
1200
#	Line 1239 | Line 1245 | log {
1245		type = debug;
1246		name = "/home/ircd/var/log/debug.log";
1247		size = 50 megabytes;
1248	<	};
1248	>	};
1249		};

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)