ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/doc/reference.conf

Comparing:
ircd-hybrid-8/doc/example.conf (file contents), Revision 1534 by michael, Sun Sep 23 13:17:14 2012 UTC vs.
ircd-hybrid/trunk/doc/reference.conf (file contents), Revision 2844 by michael, Thu Jan 16 20:20:47 2014 UTC

#	Line 1 | Line 1
1	<	/* doc/example.conf - ircd-hybrid-8 Example configuration file
2	<	* Copyright (C) 2000-2012 Hybrid Development Team
1	>	/* ircd-hybrid reference configuration file
2	>	* Copyright (C) 2000-2014 Hybrid Development Team
3		*
4		* Written by ejb, wcampbel, db, leeh and others
5	–	* Other example configurations can be found in the source dir under
6	–	* doc/.
5		*
6		* $Id$
7		*/
8
9	<	/* IMPORTANT NOTES:
9	>	/*
10	>	* ########################################################################
11	>	* IMPORTANT NOTE:
12		*
13		* auth {} blocks MUST be specified in order of precedence.  The first one
14		* that matches a user will be used.  So place spoofs first, then specials,
15		* then general access.
16	+	* ########################################################################
17		*
18		* Shell style (#), C++ style (//) and C style comments are supported.
19		*
#	Line 22 | Line 23
23		*
24		* Times/durations are written as:
25		*        12 hours 30 minutes 1 second
26	<	*
26	>	*
27		* Valid units of time:
28	<	*        month, week, day, hour, minute, second
28	>	*        year, month, week, day, hour, minute, second
29		*
30		* Valid units of size:
31		*        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
32		*
33	<	* Sizes and times may be singular or plural.
33	<	*/
34	<
35	<	/* EFNET NOTE:
36	<	*
37	<	* This config file is NOT suitable for EFNet.  EFNet admins should use
38	<	* example.efnet.conf
33	>	* Sizes and times may be singular or plural.
34		*/
35	<
35	>
36	>
37		/*
38		* serverinfo {}:  contains information about the server
39		*/
40		serverinfo {
41		/*
42	<	* name: the name of this server.  This cannot be changed at runtime.
42	>	* name: the name of this server. This cannot be changed at runtime.
43		*/
44		name = "hades.arpa";
45
46		/*
47	<	* sid: a server's unique ID.  This is three characters long and must
48	<	* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
47	>	* sid: a server's unique ID. This is three characters long and must
48	>	* be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	<	* NOTE: The letters must be capitalized.  This cannot be changed at runtime.
50	>	*
51	>	* NOTE: The letters must be capitalized. This cannot be changed at runtime.
52		*/
53	<	sid = "_CHANGE_ME_";
53	>	sid = "0HY";
54
55		/*
56		* description: the description of the server.
#	Line 62 | Line 59 | serverinfo {
59
60		/*
61		* network info: the name and description of the network this server
62	<	* is on.  Shown in the 005 reply and used with serverhiding.
62	>	* is on. Shown in the 005 reply and used with serverhiding.
63		*/
64		network_name = "MyNet";
65		network_desc = "This is My Network";
#	Line 77 | Line 74 | serverinfo {
74		* vhost: the IP to bind to when we connect outward to ipv4 servers.
75		* This should be an ipv4 IP only, or "*" for INADDR_ANY.
76		*/
77	<	#vhost = "192.169.0.1";
77	>	#       vhost = "192.169.0.1";
78
79		/*
80	<	* vhost6: the IP to bind to when we connect outward to ipv6 servers.
81	<	* This should be an ipv6 IP only, or "*" for INADDR_ANY.
80	>	* vhost6: the address to bind to when we make outgoing connections
81	>	* to IPv6 servers. This should be an IPv6 address, or "*" for INADDR_ANY.
82		*/
83	<	#vhost6 = "3ffe:80e8:546::2";
83	>	#       vhost6 = "3ffe:80e8:546::2";
84
85	<	/* max_clients: the maximum number of clients allowed to connect */
85	>	/* max_clients: the maximum number of clients allowed to connect. */
86		max_clients = 512;
87
88		/*
89	<	* rsa_private_key_file: the path to the file containing our
90	<	* rsa key for cryptlink.
89	>	* max_nick_length: only applies to local clients. Must be in the
90	>	* range of 9 to 30. Default is 9 if nothing else is specified.
91	>	*/
92	>	max_nick_length = 9;
93	>
94	>	/*
95	>	* max_topic_length: only applies to topics set by local clients.
96	>	* Must be in the range of 80 to 300. Default is 80 if nothing
97	>	* else is specified.
98	>	*/
99	>	max_topic_length = 160;
100	>
101	>	/*
102	>	* rsa_private_key_file: the path to the file containing the
103	>	* RSA key.
104	>	*
105	>	* Example commands to store a 2048 bit RSA key in rsa.key:
106		*
95	–	* Example command to store a 2048 bit RSA keypair in
96	–	* rsa.key, and the public key in rsa.pub:
97	–	*
107		*      openssl genrsa -out rsa.key 2048
108	<	*      openssl rsa -in rsa.key -pubout -out rsa.pub
100	<	*      chown <ircd-user>.<ircd.group> rsa.key rsa.pub
108	>	*      chown <ircd-user>.<ircd.group> rsa.key
109		*      chmod 0600 rsa.key
102	–	*      chmod 0644 rsa.pub
110		*/
111	<	#rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
111	>	#       rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
112
113		/*
114		* ssl_certificate_file: the path to the file containing our
115	<	* ssl certificate for encrypted client connection.
115	>	* SSL certificate for encrypted client connection.
116		*
117		* This assumes your private RSA key is stored in rsa.key. You
118	<	* MUST have an RSA key in order to generate the certificate
118	>	* MUST have an RSA key in order to generate the certificate.
119	>	*
120	>	* Example command:
121		*
122		*      openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
123		*
#	Line 121 | Line 130 | serverinfo {
130		*      Common Name: irc.someirc.net
131		*      E-mail: you@domain.com
132		*/
133	<	#ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
133	>	#       ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
134
135		/*
136		* ssl_dh_param_file:
137		*
138		* Path to the PEM encoded Diffie-Hellman parameter file.
139	<	* DH parameters are strictly required when using ciphers
140	<	* with EDH (ephemeral Diffie-Hellman) key exchange.
139	>	* DH parameters are required when using ciphers with EDH
140	>	* (ephemeral Diffie-Hellman) key exchange.
141		*
142		* A DH parameter file can be created by running:
143		*
#	Line 138 | Line 147 | serverinfo {
147		* regarding specific OpenSSL dhparam command-line options
148		* can be found in the OpenSSL manual.
149		*/
150	<	#ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
150	>	#       ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
151
152		/*
153		* ssl_cipher_list:
154		*
155	<	* List of ciphers that are supported by _this_ server. Can be used to
155	>	* List of ciphers to support on _this_ server. Can be used to
156		* enforce specific ciphers for incoming SSL/TLS connections.
157	<	* If a client (which also includes incoming server connections) isn't
158	<	* capable of any cipher listed below, the connection will simply be
159	<	* rejected.
160	<	* A list of supported ciphers can be obtained by running:
157	>	* If a client (which also includes incoming server connections) is not
158	>	* capable of using any of the ciphers listed here, the connection will
159	>	* simply be rejected.
160	>	*
161	>	* A list of supported ciphers by OpenSSL can be obtained by running:
162		*
163		*      openssl ciphers -ssl3 -tls1 -v
164		*
165		* Multiple ciphers are separated by colons. The order of preference is
166		* from left to right.
167		*/
168	<	#ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
168	>	#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
169
170		/*
171		* ssl_server_method:
#	Line 165 | Line 175 | serverinfo {
175		* outgoing (client method) SSL/TLS connections.
176		* This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
177		*/
178	<	#ssl_server_method = tlsv1, sslv3;
179	<	#ssl_client_method = tlsv1;
178	>	#       ssl_server_method = tlsv1, sslv3;
179	>	#       ssl_client_method = tlsv1;
180		};
181
182		/*
#	Line 182 | Line 192 | admin {
192		* class {}:  contains information about classes for users
193		*/
194		class {
195	<	/* name: the name of the class */
195	>	/* name: the name of the class. */
196		name = "users";
197
198		/*
#	Line 193 | Line 203 | class {
203
204		/*
205		* number_per_ip: how many local users are allowed to connect
206	<	* from one IP  (optional)
206	>	* from a single IP address  (optional)
207		*/
208		number_per_ip = 2;
209
210		/*
211		* max_local: how many local users are allowed to connect
212	<	* from one ident@host  (optional)
212	>	* from a single ident@host  (optional)
213		*/
214		max_local = 2;
215
#	Line 215 | Line 225 | class {
225
226		/*
227		* the following lines are optional and allow you to define
228	<	* how many users can connect from one /NN subnet
228	>	* how many users can connect from one /NN subnet.
229		*/
230		cidr_bitlen_ipv4 = 24;
231		cidr_bitlen_ipv6 = 120;
232		number_per_cidr = 16;
233
234		/*
235	<	* sendq: the amount of data allowed in a clients queue before
235	>	* sendq: the amount of data allowed in a client's send queue before
236		* they are dropped.
237		*/
238		sendq = 100 kbytes;
239
240		/*
241	<	* recvq: maximum amount of data in a clients queue before they
242	<	* are dropped for flooding. Defaults to 2560 if the chosen
241	>	* recvq: the amount of data allowed in a client's receive queue before
242	>	* they are dropped for flooding. Defaults to 2560 if the chosen
243		* value isn't within the range of 512 to 8000.
244		*/
245		recvq = 2560 bytes;
#	Line 241 | Line 251 | class {
251		number_per_ip = 10;
252		max_number = 100;
253		sendq = 100 kbytes;
254	+
255	+	/*
256	+	* min_idle: minimum idle time that is shown in /whois.
257	+	*/
258	+	min_idle = 3 hours;
259	+
260	+	/*
261	+	* max_idle: maximum idle time that is shown in /whois.
262	+	*/
263	+	max_idle = 8 hours;
264	+
265	+	/*
266	+	* flags:
267	+	*
268	+	* random_idle          - a fake idle time is set randomly between
269	+	*                        min_idle and max_idle
270	+	* hide_idle_from_opers - the fake idle time will also be shown to operators
271	+	*/
272	+	flags = random_idle, hide_idle_from_opers;
273		};
274
275		class {
#	Line 248 | Line 277 | class {
277		ping_time = 90 seconds;
278
279		/*
280	<	* ping_warning: how fast a server must reply to a PING before
252	<	* a warning to opers is generated.
253	<	*/
254	<	ping_warning = 15 seconds;
255	<
256	<	/*
257	<	* connectfreq: only used in server classes.  Specifies the delay
280	>	* connectfreq: only used in server classes. Specifies the delay
281		* between autoconnecting to servers.
282		*/
283		connectfreq = 5 minutes;
284
285	<	/* max number: the amount of servers to autoconnect to */
285	>	/* max number: the number of servers to autoconnect to. */
286		max_number = 1;
287
288	<	/* sendq: servers need a higher sendq as they send more data */
288	>	/* sendq: servers need a higher sendq as they send more data. */
289		sendq = 2 megabytes;
290		};
291
292		/*
293	+	* motd {}: Allows the display of a different MOTD to a client
294	+	* depending on its origin. Applies to local users only.
295	+	*/
296	+	motd {
297	+	/*
298	+	* mask: multiple mask entries are permitted. Mask can either be
299	+	* a class name or a hostname.
300	+	*/
301	+	mask = "*.at";
302	+	mask = "*.de";
303	+	mask = "*.ch";
304	+
305	+	/*
306	+	* file: path to the actual motd file.
307	+	*/
308	+	file = "/usr/local/ircd/etc/german.motd";
309	+	};
310	+
311	+	/*
312		* listen {}:  contains information about the ports ircd listens on
313		*/
314		listen {
315		/*
316	<	* port: the specific port to listen on.  If no host is specified
317	<	* before, it will listen on all available IPs.
316	>	* port: the port to listen on. If no host is specified
317	>	* earlier in the listen {} block, it will listen on all available IPs.
318		*
319	<	* Ports are separated via a comma, a range may be specified using ".."
319	>	* Ports are separated by commas; a range may be specified using ".."
320		*/
321	<
322	<	/* port: listen on all available IPs, ports 6665 to 6669 */
321	>
322	>	/* port: listen on all available IP addresses, ports 6665 to 6669 */
323		port = 6665 .. 6669;
324
325		/*
326	<	* Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
326	>	* Listen on 192.168.0.1/6697 with SSL enabled and hidden from STATS P
327		* unless you are an administrator.
328		*
329	<	* NOTE: The "flags" directive has to come before "port".  Always!
329	>	* NOTE: The "flags" directive always has to come before "port".
330		*
331		* Currently available flags are:
332		*
333	<	*  ssl    - Port is for SSL client connections only
333	>	*  ssl    - Port may only accept TLS/SSL connections
334		*  server - Only server connections are permitted
335		*  hidden - Port is hidden from /stats P, unless you're an admin
336		*/
#	Line 297 | Line 339 | listen {
339		port = 6697;
340
341		/*
342	<	* host: set a specific IP/host the ports after the line will listen
343	<	* on.  This may be ipv4 or ipv6.
342	>	* host: set a specific IP address/host to listen on using the
343	>	* subsequent port definitions. This may be IPv4 or IPv6.
344		*/
345		host = "1.2.3.4";
346		port = 7000, 7001;
#	Line 312 | Line 354 | listen {
354		*/
355		auth {
356		/*
357	<	* user: the user@host allowed to connect.  Multiple IPv4/IPv6 user
358	<	* lines are permitted per auth block.
357	>	* user: the user@host allowed to connect. Multiple user
358	>	* lines are permitted within each auth block.
359		*/
360		user = "*@172.16.0.0/12";
361		user = "*test@123D:B567:*";
#	Line 328 | Line 370 | auth {
370		encrypted = yes;
371
372		/*
373	<	* spoof: fake the users host to this.  This is free-form,
374	<	* just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
373	>	* spoof: fake the user's host to this. This is free-form, just do
374	>	* everyone a favor and don't abuse it. ('=' prefix on /stats I)
375		*/
376		spoof = "I.still.hate.packets";
377
#	Line 348 | Line 390 | auth {
390		* resv_exempt   - exempt this user from resvs ('$' prefix on /stats I)
391		* no_tilde      - remove ~ from a user with no ident ('-' prefix on /stats I)
392		* can_flood     - allow this user to exceed flood limits ('|' prefix on /stats I)
393	+	* webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
394	+	*                 ('<' prefix on /stats I)
395		*/
396		flags = need_password, spoof_notice, exceed_limit, kline_exempt,
397		gline_exempt, resv_exempt, no_tilde, can_flood;
#	Line 355 | Line 399 | auth {
399
400		auth {
401		/*
402	<	* redirect: the server and port to redirect a user to.  A user does
403	<	* not have to obey the redirection, the ircd just suggests an alternative
402	>	* redirect: the server and port to redirect a user to. A user does not
403	>	* have to obey the redirection; the ircd just suggests an alternative
404		* server for them.
405		*/
406		redirserv = "this.is.not.a.real.server";
407		redirport = 6667;
408	<
408	>
409		user = "*.server";
410
411		/* class: a class is required even though it is not used */
#	Line 376 | Line 420 | auth {
420
421		/*
422		* operator {}:  defines ircd operators
379	–	*
380	–	* ircd-hybrid no longer supports local operators, privileges are
381	–	* controlled via flags.
423		*/
424		operator {
425		/* name: the name of the oper */
426	<	name = "god";
426	>	name = "sheep";
427
428		/*
429		* user: the user@host required for this operator. Multiple
430		* user="" lines are supported.
431		*/
432	<	user = "*god@192.168.0.0/16";
432	>	user = "*sheep@192.168.0.0/16";
433		user = "*@127.0.0.0/8";
434
435		/*
436	<	* password: the password required to oper.  By default this will
436	>	* password: the password required to oper. By default this will
437		* need to be encrypted by using the provided mkpasswd tool.
438		* Several password hash algorithms are available depending
439		* on your system's crypt() implementation. For example, a modern
440	<	* glibc already has support for SHA-256/512, and MD5 encryption
440	>	* glibc already has support for the SHA-256/512 and MD5 encryption
441		* algorithms.
442		*/
443		password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
#	Line 409 | Line 450 | operator {
450
451		/*
452		* rsa_public_key_file: the public key for this oper when using Challenge.
453	<	* A password should not be defined when this is used, see
453	>	* A password should not be defined when this is used; see
454		* doc/challenge.txt for more information.
455		*/
456		#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
457
458	+	/*
459	+	* ssl_certificate_fingerprint: enhances security by additionally checking
460	+	* the oper's client certificate fingerprint against the specified
461	+	* fingerprint below.
462	+	*
463	+	* Hint: your users can use the following command to obtain a SHA-256 hash
464	+	* of their ssl certificate:
465	+	*
466	+	*      openssl x509 -sha256 -noout -fingerprint -in cert.pem | sed -e 's/^.*=//;s/://g'
467	+	*/
468	+	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
469	+
470	+	/*
471	+	* ssl_connection_required: client must be connected over SSL/TLS
472	+	* in order to be able to use this oper{} block.
473	+	* Default is 'no' if nothing else is specified.
474	+	*/
475	+	ssl_connection_required = no;
476	+
477		/* class: the class the oper joins when they successfully /oper */
478		class = "opers";
479
480		/*
481	<	* umodes: default usermodes opers get when they /oper.  If defined,
481	>	* umodes: the default usermodes opers get when they /oper. If defined,
482		* it will override oper_umodes settings in general {}.
483		* Available usermodes:
484		*
485		* +b - bots         - See bot and drone flooding notices
486		* +c - cconn        - Client connection/quit notices
427	–	* +C - cconn_full   - Client connection/quit notices full
487		* +D - deaf         - Don't receive channel messages
488		* +d - debug        - See debugging notices
489	+	* +e - external     - See remote server connection and split notices
490	+	* +F - farconnect   - Remote client connection/quit notices
491		* +f - full         - See auth{} block full notices
492		* +G - softcallerid - Server Side Ignore for users not on your channels
493		* +g - callerid     - Server Side Ignore (for privmsgs etc)
494		* +H - hidden       - Hides operator status to other users
495	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
435	<	*                     a channel
495	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
496		* +j - rej          - See rejected client notices
497		* +k - skill        - See server generated KILL messages
498		* +l - locops       - See LOCOPS messages
499		* +n - nchange      - See client nick changes
500	+	* +R - nononreg     - Only receive private messages from registered clients
501		* +s - servnotice   - See general server notices
502		* +u - unauth       - See unauthorized client notices
503		* +w - wallop       - See server generated WALLOPS
443	–	* +x - external     - See remote server connection and split notices
504		* +y - spy          - See LINKS, STATS, TRACE notices etc.
505		* +z - operwall     - See oper generated WALLOPS
506		*/
507	<	#       umodes = locops, servnotice, operwall, wallop;
507	>	umodes = locops, servnotice, operwall, wallop;
508
509		/*
510	<	* privileges: controls the activities and commands an oper is
510	>	* privileges: controls the activities and commands an oper is
511		* allowed to do on the server. All options default to no.
512		* Available options:
513		*
514	<	* module       - allows MODULE
515	<	* global_kill  - allows remote users to be /KILL'd
516	<	* remote       - allows remote SQUIT and CONNECT
517	<	* remoteban    - allows remote KLINE/UNKLINE
518	<	* dline        - allows DLINE
519	<	* undline      - allows UNDLINE
520	<	* kline        - allows KILL and KLINE
521	<	* unkline      - allows UNKLINE
522	<	* gline        - allows GLINE
523	<	* xline        - allows XLINE
524	<	* globops      - allows GLOBOPS
525	<	* operwall     - allows OPERWALL
526	<	* nick_changes - allows oper to see nickchanges via usermode +n
527	<	* rehash       - allows oper to REHASH config
528	<	* die          - allows DIE
529	<	* restart      - allows RESTART
530	<	* set          - allows SET
531	<	* admin        - gives admin privileges. admins for example,
532	<	*                may see the real IP addresses of servers.
514	>	* module         - allows MODULE
515	>	* connect        - allows local CONNECT              | ('P' flag)
516	>	* connect:remote - allows remote CONNECT             | ('Q' flag)
517	>	* squit          - allows local SQUIT                | ('R' flag)
518	>	* squit:remote   - allows remote SQUIT               | ('S' flag)
519	>	* kill           - allows to KILL local clients      | ('N' flag)
520	>	* kill:remote    - allows remote users to be /KILL'd | ('O' flag)
521	>	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
522	>	* dline          - allows DLINE                      |
523	>	* undline        - allows UNDLINE                    |
524	>	* kline          - allows KLINE                      | ('K' flag)
525	>	* unkline        - allows UNKLINE                    | ('U' flag)
526	>	* gline          - allows GLINE                      | ('G' flag)
527	>	* xline          - allows XLINE                      | ('X' flag)
528	>	* locops         - allows LOCOPS                     |
529	>	* globops        - allows GLOBOPS                    |
530	>	* wallops        - allows WALLOPS                    |
531	>	* operwall       - allows OPERWALL                   | ('L' flag)
532	>	* rehash         - allows oper to REHASH config      | ('H' flag)
533	>	* die            - allows DIE                        | ('D' flag)
534	>	* restart        - allows RESTART                    |
535	>	* set            - allows SET                        |
536	>	* admin          - gives administrator privileges    | ('A' flag)
537		*/
538	<	flags = global_kill, remote, kline, unkline, xline, globops, restart,
539	<	die, rehash, nick_changes, admin, operwall, module;
538	>	flags = kill, kill:remote, connect, connect:remote, kline, unkline,
539	>	xline, globops, restart, die, rehash, admin, operwall, module;
540		};
541
542	+	/*
543	+	* service {}: specifies a server which may act as a network service
544	+	*
545	+	* NOTE: it is very important that every server on the network
546	+	*       has the same service{} block.
547	+	*/
548		service {
549		name = "service.someserver";
550		name = "stats.someserver";
551		};
552
553		/*
554	<	* connect {}:  controls servers we connect to
554	>	* connect {}: define a server to connect to
555		*/
556		connect {
557		/* name: the name of the server */
558		name = "irc.uplink.com";
559
560		/*
561	<	* host: the host or IP to connect to.  If a hostname is used it
562	<	* must match the reverse dns of the server.
561	>	* host: the host or IP address to connect to. If a hostname is used it
562	>	* must match the reverse DNS of the server.
563		*/
564		host = "192.168.0.1";
565
566		/*
567	<	* vhost: the IP to bind to when we connect outward to servers.
567	>	* vhost: the IP address to bind to when making outgoing connections to
568	>	* servers.
569		* serverinfo::vhost and serverinfo::vhost6 will be overridden
570		* by this directive.
571		*/
572		vhost = "192.168.0.2";
573
574		/*
575	<	* passwords: the passwords we send (OLD C:) and accept (OLD N:).
576	<	* The remote server will have these passwords reversed.
575	>	* passwords: the passwords to send (OLD C:) and accept (OLD N:).
576	>	* The remote server will have these passwords swapped.
577		*/
578		send_password = "password";
579		accept_password = "anotherpassword";
#	Line 517 | Line 588 | connect {
588		port = 6666;
589
590		/*
591	<	* hub_mask: the mask of servers that this server may hub.  Multiple
592	<	* entries are permitted
591	>	* hub_mask: the mask of servers that this server may hub. Multiple
592	>	* entries are permitted.
593		*/
594		hub_mask = "*";
595
596		/*
597	<	* leaf_mask: the mask of servers this server may not hub.  Multiple
598	<	* entries are permitted.  Useful for forbidding EU -> US -> EU routes.
597	>	* leaf_mask: the mask of servers this server may not hub. Multiple
598	>	* entries are permitted. Useful for forbidding EU -> US -> EU routes.
599		*/
600		#       leaf_mask = "*.uk";
601
#	Line 535 | Line 606 | connect {
606		* ssl_cipher_list:
607		*
608		* List of ciphers that the server we are connecting to must support.
609	<	* If the server isn't capable of any cipher listed below, the
610	<	* connection will simply be rejected.
609	>	* If the server is not capable of using any of the ciphers listed below,
610	>	* the connection will simply be rejected.
611		* Can be used to enforce stronger ciphers, even though this option
612		* is not necessarily required to establish a SSL/TLS connection.
613		*
614		* Multiple ciphers are separated by colons. The order of preference
615		* is from left to right.
616		*/
617	<	#ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
617	>	#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
618	>
619	>	/*
620	>	* ssl_certificate_fingerprint: enhances security by additionally checking
621	>	* the server's client certificate fingerprint against the specified
622	>	* fingerprint below.
623	>	*/
624	>	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
625
626		/*
627		* autoconn   - controls whether we autoconnect to this server or not,
#	Line 574 | Line 652 | connect {
652		*/
653		cluster {
654		/*
655	<	* name: the server to share with, this can take wildcards
655	>	* name: the server to share with; this can take wildcards
656		*
657	<	* NOTE: only local actions will be clustered, meaning if
657	>	* NOTE: only local actions will be clustered, meaning that if
658		*       the server receives a shared kline/unkline/etc, it
659		*       will not be propagated to clustered servers.
660		*
#	Line 587 | Line 665 | cluster {
665		name = "*.arpa";
666
667		/*
668	<	* type: list of what to share, options are as follows:
668	>	* type: list of what to share; options are as follows:
669		*      dline   - share dlines
670		*      undline - share undlines
671		*      kline   - share klines
#	Line 605 | Line 683 | cluster {
683		/*
684		* shared {}: users that are allowed to remote kline
685		*
686	<	* NOTE: This can be effectively used for remote klines.
686	>	* NOTE: This can effectively be used for remote klines.
687		*       Please note that there is no password authentication
688	<	*       for users setting remote klines.  You must also be
688	>	*       for users setting remote klines. You must also be
689		*       /oper'd in order to issue a remote kline.
690		*/
691		shared {
692		/*
693	<	* name: the server the user must be on to set klines.  If this is not
694	<	* specified, the user will be allowed to kline from all servers.
693	>	* name: the server the user must be connected to in order to set klines.
694	>	* If this is not specified, the user will be allowed to kline from all
695	>	* servers.
696		*/
697		name = "irc2.some.server";
698
699		/*
700	<	* user: the user@host mask that is allowed to set klines.  If this is
700	>	* user: the user@host mask that is allowed to set klines. If this is
701		* not specified, all users on the server above will be allowed to set
702		* a remote kline.
703		*/
#	Line 649 | Line 728 | kill {
728		reason = "Obviously hacked account";
729		};
730
652	–	kill {
653	–	user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
654	–
655	–	/*
656	–	* NOTE: You have to set type=regex; when using a regular expression
657	–	* based user entry
658	–	*/
659	–	type = regex;
660	–	};
661	–
731		/*
732	<	* deny {}:  IPs that are not allowed to connect (before DNS/ident lookup)
732	>	* deny {}:  IP addresses that are not allowed to connect
733	>	* (before DNS/ident lookup)
734		* Oper issued dlines will be added to the specified dline config
735		*/
736		deny {
#	Line 669 | Line 739 | deny {
739		};
740
741		/*
742	<	* exempt {}: IPs that are exempt from deny {} and Dlines
742	>	* exempt {}:  IP addresses that are exempt from deny {} and Dlines
743		*/
744		exempt {
745		ip = "192.168.0.0/16";
#	Line 678 | Line 748 | exempt {
748		/*
749		* resv {}:  nicks and channels users may not use/join
750		*/
751	+	resv { mask = "clone*"; reason = "Clone bots"; };
752	+	resv { mask = "ChanServ"; reason = "Reserved for services"; };
753	+	resv { mask = "NickServ"; reason = "Reserved for services"; };
754	+	resv { mask = "OperServ"; reason = "Reserved for services"; };
755	+	resv { mask = "MemoServ"; reason = "Reserved for services"; };
756	+	resv { mask = "BotServ"; reason = "Reserved for services"; };
757	+	resv { mask = "HelpServ"; reason = "Reserved for services"; };
758	+	resv { mask = "HostServ"; reason = "Reserved for services"; };
759	+	resv { mask = "StatServ"; reason = "Reserved for services"; };
760	+	resv { mask = "#*services*"; reason = "Reserved for services"; };
761	+
762		resv {
763	<	/* reason: the reason for the proceeding resv's */
764	<	reason = "Reserved for services";
763	>	/*
764	>	* mask: masks starting with a '#' are automatically considered
765	>	* as channel name masks.
766	>	*/
767	>	mask = "#helsinki";
768	>	reason = "Channel is reserved for finnish inhabitants";
769
770	<	/* resv: the nicks and channels users may not join/use */
771	<	nick = "Global";
772	<	nick = "DevNull";
773	<	nick = "BotServ";
774	<	nick = "Services";
775	<	nick = "StatServ";
691	<	nick = "HelpServ";
692	<	nick = "HostServ";
693	<	nick = "NickServ";
694	<	nick = "ChanServ";
695	<	nick = "MemoServ";
696	<	nick = "OperServ";
697	<	channel = "#services";
698	<
699	<	/* resv: wildcard masks are also supported in nicks only */
700	<	reason = "Clone bots";
701	<	nick = "clone*";
770	>	/*
771	>	* exempt: can be either a ISO 3166 alpha-2 two letter country
772	>	* code, or a nick!user@host mask. CIDR is supported. Exempt
773	>	* entries can be stacked.
774	>	*/
775	>	exempt = "FI";
776		};
777
778		/*
779	<	* gecos {}:  The X: replacement, used for banning users based on
706	<	* their "realname".
779	>	* gecos {}:  Used for banning users based on their "realname".
780		*/
781		gecos {
782		name = "*sex*";
#	Line 715 | Line 788 | gecos {
788		reason = "Trojan drone";
789		};
790
718	–	gecos {
719	–	name = "*http*";
720	–	reason = "Spambot";
721	–	};
722	–
723	–	gecos {
724	–	name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
725	–
726	–	/*
727	–	* NOTE: You have to set type=regex; when using a regular expression
728	–	* based name entry
729	–	*/
730	–	type = regex;
731	–	};
732	–
791		/*
792		* channel {}:  The channel block contains options pertaining to channels
793		*/
794		channel {
795		/*
796		* disable_fake_channels: this option, if set to 'yes', will
797	<	* disallow clients to create or join channels that have one
797	>	* disallow clients from creating or joining channels that have one
798		* of the following ASCII characters in their name:
799		*
800		*   2 | bold
#	Line 750 | Line 808 | channel {
808		disable_fake_channels = yes;
809
810		/*
753	–	* restrict_channels: reverse channel RESVs logic, only reserved
754	–	* channels are allowed
755	–	*/
756	–	restrict_channels = no;
757	–
758	–	/*
811		* knock_delay: The amount of time a user must wait between issuing
812		* the knock command.
813		*/
#	Line 779 | Line 831 | channel {
831		*/
832		max_chans_per_oper = 50;
833
782	–	/* quiet_on_ban: stop banned people talking in channels. */
783	–	quiet_on_ban = yes;
784	–
834		/* max_bans: maximum number of +b/e/I modes in a channel */
835		max_bans = 100;
836
837		/*
838	<	* how many joins in how many seconds constitute a flood, use 0 to
838	>	* how many joins in how many seconds constitute a flood. Use 0 to
839		* disable. +b opers will be notified (changeable via /set)
840		*/
841		join_flood_count = 16;
842		join_flood_time = 8 seconds;
843
844		/*
845	<	* splitcode: The ircd will now check splitmode every few seconds.
845	>	* The ircd will now check splitmode (whether a server is split from
846	>	* the network) every few seconds; this functionality is known as
847	>	* splitcode and is influenced by the options below.
848		*
849		* Either split users or split servers can activate splitmode, but
850		* both conditions must be met for the ircd to deactivate splitmode.
851	<	*
851	>	*
852		* You may force splitmode to be permanent by /quote set splitmode on
853		*/
854
855		/*
856		* default_split_user_count: when the usercount is lower than this level,
857	<	* consider ourselves split.  This must be set for automatic splitmode.
857	>	* consider ourselves split. This must be set for automatic splitmode.
858		*/
859		default_split_user_count = 0;
860
861		/*
862		* default_split_server_count: when the servercount is lower than this,
863	<	* consider ourselves split.  This must be set for automatic splitmode.
863	>	* consider ourselves split. This must be set for automatic splitmode.
864		*/
865		default_split_server_count = 0;
866
867	<	/* no_create_on_split: disallow users creating channels on split. */
867	>	/* no_create_on_split: do not allow users to create channels on split. */
868		no_create_on_split = yes;
869
870	<	/* no_join_on_split: disallow users joining channels at all on a split. */
870	>	/* no_join_on_split: do not allow users to join channels on a split. */
871		no_join_on_split = no;
872		};
873
874		/*
875		* serverhide {}:  The serverhide block contains the options regarding
876	<	* serverhiding
876	>	* to server hiding
877		*/
878		serverhide {
879		/*
880	+	* disable_remote_commands: disable users issuing commands
881	+	* on remote servers.
882	+	*/
883	+	disable_remote_commands = no;
884	+
885	+	/*
886		* flatten_links: this option will show all servers in /links appear
887	<	* that they are linked to this current server
887	>	* as though they are linked to this current server.
888		*/
889		flatten_links = no;
890
#	Line 839 | Line 896 | serverhide {
896
897		/*
898		* hidden: hide this server from a /links output on servers that
899	<	* support it.  This allows hub servers to be hidden etc.
899	>	* support it. This allows hub servers to be hidden etc.
900		*/
901		hidden = no;
902
#	Line 850 | Line 907 | serverhide {
907		hide_servers = no;
908
909		/*
910	+	* hide_services: define this if you want to hide the location of
911	+	* services servers that are specified in the service{} block.
912	+	*/
913	+	hide_services = no;
914	+
915	+	/*
916		* Use this as the servername users see if hide_servers = yes.
917		*/
918		hidden_name = "*.hidden.com";
919
920		/*
921		* hide_server_ips: If this is disabled, opers will be unable to see
922	<	* servers ips and will be shown a masked ip, admins will be shown the
923	<	* real ip.
922	>	* servers' IP addresses and will be shown a masked IP address; admins
923	>	* will be shown the real IP address.
924		*
925	<	* If this is enabled, nobody can see a servers ip. *This is a kludge*,
926	<	* it has the side effect of hiding the ips everywhere, including
927	<	* logfiles.
925	>	* If this is enabled, nobody can see a server's IP address.
926	>	* *This is a kludge*: it has the side effect of hiding the IP addresses
927	>	* everywhere, including logfiles.
928		*
929		* We recommend you leave this disabled, and just take care with who you
930	<	* give admin=yes; to.
930	>	* give administrator privileges to.
931		*/
932		hide_server_ips = no;
933		};
934
935		/*
936		* general {}:  The general block contains many of the options that were once
937	<	* compiled in options in config.h.  The general block is read at start time.
937	>	* compiled in options in config.h
938		*/
939		general {
940	+	/*
941	+	* cycle_on_host_change: sends a fake QUIT/JOIN combination
942	+	* when services change the hostname of a specific client.
943	+	*/
944	+	cycle_on_host_change = yes;
945	+
946		/* services_name: servername of nick/channel services */
947		services_name = "service.someserver";
948
949		/* max_watch: maximum WATCH entries a client can have. */
950		max_watch = 60;
951
952	<	/* gline_enable: enable glines, network wide temp klines */
952	>	/* gline_enable: enable glines (network-wide temporary klines). */
953		gline_enable = yes;
954
955		/*
956		* gline_duration: the amount of time a gline will remain on your
957	<	* server before expiring
957	>	* server before expiring.
958		*/
959		gline_duration = 1 day;
960
961		/*
962	<	* gline_request_duration:  how long a pending G-line can be around.
963	<	* 10 minutes should be plenty
962	>	* gline_request_duration: how long a pending G-line can be around.
963	>	* 10 minutes should be plenty.
964		*/
965		gline_request_duration = 10 minutes;
966
967		/*
968		* gline_min_cidr: the minimum required length of a CIDR bitmask
969	<	* for IPv4 based glines
969	>	* for IPv4 based glines.
970		*/
971		gline_min_cidr = 16;
972
973		/*
974		* gline_min_cidr6: the minimum required length of a CIDR bitmask
975	<	* for IPv6 based glines
975	>	* for IPv6 based glines.
976		*/
977		gline_min_cidr6 = 48;
978
#	Line 913 | Line 982 | general {
982		invisible_on_connect = yes;
983
984		/*
985	<	* Show "actually using host <ip>" on /whois when possible.
986	<	*/
987	<	use_whois_actually = yes;
988	<
920	<	/*
921	<	* Max time from the nickname change that still causes KILL
922	<	* automatically to switch for the current nick of that user.
985	>	* kill_chase_time_limit: KILL chasing is a feature whereby a KILL
986	>	* issued for a user who has recently changed nickname will be applied
987	>	* automatically to the new nick. kill_chase_time_limit is the maximum
988	>	* time following a nickname change that this chasing will apply.
989		*/
990		kill_chase_time_limit = 90 seconds;
991
992		/*
993	<	* If hide_spoof_ips is disabled, opers will be allowed to see the real
994	<	* IP of spoofed users in /trace etc. If this is defined they will be
995	<	* shown a masked IP.
993	>	* hide_spoof_ips: if disabled, opers will be allowed to see the real
994	>	* IP address of spoofed users in /trace etc. If this is defined they
995	>	* will be shown a masked IP.
996		*/
997		hide_spoof_ips = yes;
998
999		/*
1000	<	* Ignore bogus timestamps from other servers.  Yes, this will desync
1001	<	* the network, but it will allow chanops to resync with a valid non TS 0
1000	>	* Ignore bogus timestamps from other servers. Yes, this will desync the
1001	>	* network, but it will allow chanops to resync with a valid non TS 0
1002		*
1003		* This should be enabled network wide, or not at all.
1004		*/
#	Line 944 | Line 1010 | general {
1010		*/
1011		disable_auth = no;
1012
947	–	/* disable_remote_commands: disable users doing commands on remote servers */
948	–	disable_remote_commands = no;
949	–
1013		/*
1014		* tkline_expire_notices: enables or disables temporary kline/xline
1015		* expire notices.
#	Line 955 | Line 1018 | general {
1018
1019		/*
1020		* default_floodcount: the default value of floodcount that is configurable
1021	<	* via /quote set floodcount.  This is the amount of lines a user
1021	>	* via /quote set floodcount. This is the number of lines a user
1022		* may send to any other user/channel in one second.
1023		*/
1024		default_floodcount = 10;
1025
1026		/*
1027	<	* failed_oper_notice: send a notice to all opers on the server when
1027	>	* failed_oper_notice: send a notice to all opers on the server when
1028		* someone tries to OPER and uses the wrong password, host or ident.
1029		*/
1030		failed_oper_notice = yes;
1031
1032		/*
1033	<	* dots_in_ident: the amount of '.' characters permitted in an ident
1033	>	* dots_in_ident: the number of '.' characters permitted in an ident
1034		* reply before the user is rejected.
1035		*/
1036		dots_in_ident = 2;
1037
1038		/*
1039	<	* min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1040	<	* placed via the server.  klines hand placed are exempt from limits.
1041	<	* wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1039	>	* min_nonwildcard: the minimum number of non-wildcard characters in
1040	>	* k/d/g lines placed via the server. K-lines hand-placed are exempt from
1041	>	* this limit.
1042	>	* Wildcard chars: '.', ':', '*', '?', '@', '!'
1043		*/
1044		min_nonwildcard = 4;
1045
1046		/*
1047	<	* min_nonwildcard_simple: the minimum non wildcard characters in
1048	<	* gecos bans.  wildcard chars: '*' '?' '#'
1047	>	* min_nonwildcard_simple: the minimum number of non-wildcard characters
1048	>	* in gecos bans. Wildcard chars: '*', '?'
1049		*/
1050		min_nonwildcard_simple = 3;
1051
1052	<	/* max_accept: maximum allowed /accept's for +g usermode */
1052	>	/* max_accept: maximum allowed /accept's for +g usermode. */
1053		max_accept = 20;
1054
1055	<	/* anti_nick_flood: enable the nickflood control code */
1055	>	/* anti_nick_flood: enable the nickflood control code. */
1056		anti_nick_flood = yes;
1057
1058	<	/* nick flood: the nick changes allowed in the specified period */
1058	>	/* nick flood: the number of nick changes allowed in the specified period */
1059		max_nick_time = 20 seconds;
1060		max_nick_changes = 5;
1061
#	Line 1003 | Line 1067 | general {
1067
1068		/*
1069		* ts delta: the time delta allowed between server clocks before
1070	<	* a warning is given, or before the link is dropped.  all servers
1070	>	* a warning is given, or before the link is dropped. All servers
1071		* should run ntpdate/rdate to keep clocks in sync
1072		*/
1073		ts_warn_delta = 30 seconds;
1074		ts_max_delta = 5 minutes;
1075
1076		/*
1013	–	* kline_with_reason: show the user the reason why they are k/d/glined
1014	–	* on exit.  May give away who set k/dline when set via tcm.
1015	–	*/
1016	–	kline_with_reason = yes;
1017	–
1018	–	/*
1019	–	* kline_reason: show this message to users on channel
1020	–	* instead of the oper reason.
1021	–	*/
1022	–	kline_reason = "Connection closed";
1023	–
1024	–	/*
1025	–	* reject_hold_time: wait this amount of time before disconnecting
1026	–	* a rejected client. Use 0 to disable.
1027	–	*/
1028	–	reject_hold_time = 0;
1029	–
1030	–	/*
1077		* warn_no_nline: warn opers about servers that try to connect but
1078	<	* we don't have a connect {} block for.  Twits with misconfigured
1079	<	* servers can get really annoying with this enabled.
1078	>	* for which we don't have a connect {} block. Twits with misconfigured
1079	>	* servers can become really annoying with this enabled.
1080		*/
1081		warn_no_nline = yes;
1082
1083		/*
1084		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1085	<	* operators and administrators.  Doing so is a good idea in case
1085	>	* operators and administrators. Doing so is a good idea in case
1086		* there are any exempted (exempt{}) server IPs you don't want to
1087		* see leaked.
1088		*/
#	Line 1048 | Line 1094 | general {
1094		/* stats_P_oper_only: make stats P (ports) oper only */
1095		stats_P_oper_only = yes;
1096
1097	+	/* stats_u_oper_only: make stats u (uptime) oper only */
1098	+	stats_u_oper_only = no;
1099	+
1100		/*
1101	<	* stats i oper only: make stats i (auth {}) oper only. set to:
1102	<	*     yes:    show users no auth blocks, made oper only.
1103	<	*     masked: show users first matching auth block
1104	<	*     no:     show users all auth blocks.
1101	>	* stats i oper only: make stats i (auth {}) oper only. Set to:
1102	>	*     yes    - show users no auth blocks, made oper only.
1103	>	*     masked - show users the first matching auth block
1104	>	*     no     - show users all auth blocks.
1105		*/
1106		stats_i_oper_only = yes;
1107
1108		/*
1109	<	* stats_k_oper_only: make stats k/K (klines) oper only.  set to:
1110	<	*     yes:    show users no auth blocks, made oper only
1111	<	*     masked: show users first matching auth block
1112	<	*     no:     show users all auth blocks.
1109	>	* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1110	>	*     yes    - show users no auth blocks, made oper only
1111	>	*     masked - show users the first matching auth block
1112	>	*     no     - show users all auth blocks.
1113		*/
1114		stats_k_oper_only = yes;
1115
#	Line 1077 | Line 1126 | general {
1126		opers_bypass_callerid = no;
1127
1128		/*
1129	<	* pace_wait_simple: time between use of less intensive commands
1129	>	* pace_wait_simple: minimum time required between use of less
1130	>	* intensive commands
1131		* (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1132		*/
1133		pace_wait_simple = 1 second;
1134
1135		/*
1136	<	* pace_wait: time between more intensive commands
1136	>	* pace_wait: minimum time required between use of more intensive commands
1137		* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1138		*/
1139		pace_wait = 10 seconds;
1140
1141		/*
1142	<	* short_motd: send clients a notice telling them to read the motd
1143	<	* instead of forcing a motd to clients who may simply ignore it.
1142	>	* short_motd: send clients a notice telling them to read the MOTD
1143	>	* instead of forcing an MOTD to clients who may simply ignore it.
1144		*/
1145		short_motd = no;
1146
#	Line 1105 | Line 1155 | general {
1155
1156		/*
1157		* true_no_oper_flood: completely eliminate flood limits for opers
1158	<	* and for clients with can_flood = yes in their auth {} blocks
1158	>	* and for clients with can_flood = yes in their auth {} blocks.
1159		*/
1160		true_no_oper_flood = yes;
1161
1162	<	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1162	>	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1163		oper_pass_resv = yes;
1164
1165	<	/* REMOVE ME.  The following line checks you've been reading. */
1165	>	/* REMOVE ME. The following line checks that you have been reading. */
1166		havent_read_conf = 1;
1167
1168		/*
1169	<	* max_targets: the maximum amount of targets in a single
1170	<	* PRIVMSG/NOTICE.  Set to 999 NOT 0 for unlimited.
1169	>	* max_targets: the maximum number of targets in a single
1170	>	* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1171		*/
1172		max_targets = 4;
1173
1174		/*
1125	–	* message_locale: the default message locale
1126	–	* Use "standard" for the compiled in defaults.
1127	–	* To install the translated messages, go into messages/ in the
1128	–	* source directory and run `make install'.
1129	–	*/
1130	–	message_locale = "standard";
1131	–
1132	–	/*
1175		* usermodes configurable: a list of usermodes for the options below
1176		*
1177		* +b - bots         - See bot and drone flooding notices
1178		* +c - cconn        - Client connection/quit notices
1137	–	* +C - cconn_full   - Client connection/quit notices full
1179		* +D - deaf         - Don't receive channel messages
1180		* +d - debug        - See debugging notices
1181	+	* +e - external     - See remote server connection and split notices
1182	+	* +F - farconnect   - Remote client connection/quit notices
1183		* +f - full         - See auth{} block full notices
1184		* +G - softcallerid - Server Side Ignore for users not on your channels
1185		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1186		* +H - hidden       - Hides operator status to other users
1187	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
1145	<	*                     a channel
1187	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
1188		* +j - rej          - See rejected client notices
1189		* +k - skill        - See server generated KILL messages
1190		* +l - locops       - See LOCOPS messages
1191		* +n - nchange      - See client nick changes
1192	+	* +R - nononreg     - Only receive private messages from registered clients
1193		* +s - servnotice   - See general server notices
1194		* +u - unauth       - See unauthorized client notices
1195		* +w - wallop       - See server generated WALLOPS
1153	–	* +x - external     - See remote server connection and split notices
1196		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1197		* +z - operwall     - See oper generated WALLOPS
1198		*/
1199
1200		/* oper_only_umodes: usermodes only opers may set */
1201	<	oper_only_umodes = bots, cconn, cconn_full, debug, full, hidden, skill,
1202	<	nchange, rej, spy, external, operwall,
1203	<	locops, unauth;
1201	>	oper_only_umodes = bots, cconn, debug, full, hidden, skill,
1202	>	nchange, rej, spy, external, operwall,
1203	>	locops, unauth, farconnect;
1204
1205		/* oper_umodes: default usermodes opers get when they /oper */
1206		oper_umodes = bots, locops, servnotice, operwall, wallop;
1207
1208		/*
1209		* use_egd: if your system does not have *random devices yet you
1210	<	* want to use OpenSSL and encrypted links, enable this.  Beware -
1211	<	* EGD is *very* CPU intensive when gathering data for its pool
1210	>	* want to use OpenSSL and encrypted links, enable this. Beware -
1211	>	* EGD is *very* CPU intensive when gathering data for its pool.
1212		*/
1213		#       use_egd = yes;
1214
#	Line 1177 | Line 1219 | general {
1219		#       egdpool_path = "/var/run/egd-pool";
1220
1221		/*
1222	<	* throttle_time: the minimum amount of time between connections from
1223	<	* the same ip.  exempt {} blocks are excluded from this throttling.
1224	<	* Offers protection against flooders who reconnect quickly.
1222	>	* throttle_time: the minimum amount of time required between
1223	>	* connections from the same IP address. exempt {} blocks are excluded
1224	>	* from this throttling.
1225	>	* Offers protection against flooders who reconnect quickly.
1226		* Set to 0 to disable.
1227		*/
1228		throttle_time = 10;
#	Line 1193 | Line 1236 | modules {
1236		path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1237		path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1238
1239	<	/* module: the name of a module to load on startup/rehash */
1240	<	#module = "some_module.la";
1239	>	/* module: the name of a module to load on startup/rehash. */
1240	>	#       module = "some_module.la";
1241		};
1242
1243		/*
#	Line 1206 | Line 1249 | log {
1249
1250		file {
1251		type = oper;
1252	<	name = "/home/ircd/var/log/oper.log";
1252	>	name = "/usr/local/ircd/var/log/oper.log";
1253		size = unlimited;
1254		};
1255
1256		file {
1257		type = user;
1258	<	name = "/home/ircd/var/log/user.log";
1258	>	name = "/usr/local/ircd/var/log/user.log";
1259		size = 50 megabytes;
1260		};
1261
1262		file {
1263		type = kill;
1264	<	name = "/home/ircd/var/log/kill.log";
1264	>	name = "/usr/local/ircd/var/log/kill.log";
1265		size = 50 megabytes;
1266		};
1267
1268		file {
1269		type = kline;
1270	<	name = "/home/ircd/var/log/kline.log";
1270	>	name = "/usr/local/ircd/var/log/kline.log";
1271		size = 50 megabytes;
1272		};
1273
1274		file {
1275		type = dline;
1276	<	name = "/home/ircd/var/log/dline.log";
1276	>	name = "/usr/local/ircd/var/log/dline.log";
1277		size = 50 megabytes;
1278		};
1279
1280		file {
1281		type = gline;
1282	<	name = "/home/ircd/var/log/gline.log";
1282	>	name = "/usr/local/ircd/var/log/gline.log";
1283	>	size = 50 megabytes;
1284	>	};
1285	>
1286	>	file {
1287	>	type = xline;
1288	>	name = "/usr/local/ircd/var/log/xline.log";
1289	>	size = 50 megabytes;
1290	>	};
1291	>
1292	>	file {
1293	>	type = resv;
1294	>	name = "/usr/local/ircd/var/log/resv.log";
1295		size = 50 megabytes;
1296		};
1297
1298		file {
1299		type = debug;
1300	<	name = "/home/ircd/var/log/debug.log";
1300	>	name = "/usr/local/ircd/var/log/debug.log";
1301		size = 50 megabytes;
1302	<	};
1302	>	};
1303		};

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)