ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/trunk/doc/reference.conf

Comparing:
ircd-hybrid-8/etc/example.conf (file contents), Revision 1156 by michael, Tue Aug 9 20:29:20 2011 UTC vs.
ircd-hybrid/trunk/doc/reference.conf (file contents), Revision 1976 by michael, Wed May 8 19:33:06 2013 UTC

#	Line 1 | Line 1
1	<	/* doc/example.conf - ircd-hybrid-7 Example configuration file
2	<	* Copyright (C) 2000-2011 Hybrid Development Team
1	>	/* ircd-hybrid reference configuration file
2	>	* Copyright (C) 2000-2013 Hybrid Development Team
3		*
4		* Written by ejb, wcampbel, db, leeh and others
5	–	* Other example configurations can be found in the source dir under
6	–	* etc/.
5		*
6		* $Id$
7		*/
8
9	<	/* IMPORTANT NOTES:
9	>	/*
10	>	* ########################################################################
11	>	* IMPORTANT NOTES:
12		*
13		* auth {} blocks MUST be specified in order of precedence.  The first one
14		* that matches a user will be used.  So place spoofs first, then specials,
15		* then general access.
16	+	* ########################################################################
17		*
18		* Shell style (#), C++ style (//) and C style comments are supported.
19		*
#	Line 24 | Line 25
25		*        12 hours 30 minutes 1 second
26		*
27		* Valid units of time:
28	<	*        month, week, day, hour, minute, second
28	>	*        year, month, week, day, hour, minute, second
29		*
30		* Valid units of size:
31		*        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
#	Line 32 | Line 33
33		* Sizes and times may be singular or plural.
34		*/
35
36	<	/* EFNET NOTE:
36	<	*
37	<	* This config file is NOT suitable for EFNet.  EFNet admins should use
38	<	* example.efnet.conf
39	<	*/
40	<
36	>
37		/*
38	<	* serverinfo {}:  contains information about the server. (OLD M:)
38	>	* serverinfo {}:  contains information about the server
39		*/
40		serverinfo {
41		/*
#	Line 51 | Line 47 | serverinfo {
47		* sid: a server's unique ID.  This is three characters long and must
48		* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	<	* NOTE: The letters must be capitalized.  This cannot be changed at runtime.
50	>	* NOTE: The letters must be capitalized. This cannot be changed at runtime.
51		*/
52	<	sid = "_CHANGE_ME_";
52	>	sid = "0HY";
53
54		/*
55	<	* description: the description of the server.  '[' and ']' may not
60	<	* be used here for compatibility with older servers.
55	>	* description: the description of the server.
56		*/
57	<	description = "hybrid-7 test server";
57	>	description = "ircd-hybrid test server";
58
59		/*
60		* network info: the name and description of the network this server
61	<	* is on.  Shown in the 005 reply and used with serverhiding.
61	>	* is on. Shown in the 005 reply and used with serverhiding.
62		*/
63		network_name = "MyNet";
64		network_desc = "This is My Network";
#	Line 86 | Line 81 | serverinfo {
81		*/
82		#vhost6 = "3ffe:80e8:546::2";
83
84	<	/* max_clients: the maximum number of clients allowed to connect */
84	>	/* max_clients: the maximum number of clients allowed to connect. */
85		max_clients = 512;
86
87		/*
88	+	* max_nick_length: only applies to local clients. Must be in the
89	+	* range of 9 to 30. Default is 9 if nothing else is specified.
90	+	*/
91	+	max_nick_length = 9;
92	+
93	+	/*
94	+	* max_topic_length: only applies to topics set by local clients.
95	+	* Must be in the range of 80 to 300. Default is 80 if nothing
96	+	* else is specified.
97	+	*/
98	+	max_topic_length = 160;
99	+
100	+	/*
101		* rsa_private_key_file: the path to the file containing our
102		* rsa key for cryptlink.
103		*
104		* Example command to store a 2048 bit RSA keypair in
105		* rsa.key, and the public key in rsa.pub:
106		*
107	<	*      openssl genrsa -out rsa.key 2048
107	>	*      openssl genrsa -out rsa.key 2048
108		*      openssl rsa -in rsa.key -pubout -out rsa.pub
109		*      chown <ircd-user>.<ircd.group> rsa.key rsa.pub
110		*      chmod 0600 rsa.key
#	Line 109 | Line 117 | serverinfo {
117		* ssl certificate for encrypted client connection.
118		*
119		* This assumes your private RSA key is stored in rsa.key. You
120	<	* MUST have an RSA key in order to generate the certificate
120	>	* MUST have an RSA key in order to generate the certificate.
121	>	*
122	>	* Example command:
123		*
124		*      openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
125		*
#	Line 125 | Line 135 | serverinfo {
135		#ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
136
137		/*
138	<	* ssl_server_protocol:
139	<	* SSL/TLS protocols we provide for incoming secure connections.
138	>	* ssl_dh_param_file:
139	>	*
140	>	* Path to the PEM encoded Diffie-Hellman parameter file.
141	>	* DH parameters are strictly required when using ciphers
142	>	* with EDH (ephemeral Diffie-Hellman) key exchange.
143	>	*
144	>	* A DH parameter file can be created by running:
145	>	*
146	>	*      openssl dhparam -out dhparam.pem 1024
147	>	*
148	>	* Prime size must be at least 1024 bits. Further information
149	>	* regarding specific OpenSSL dhparam command-line options
150	>	* can be found in the OpenSSL manual.
151	>	*/
152	>	#ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
153	>
154	>	/*
155	>	* ssl_cipher_list:
156	>	*
157	>	* List of ciphers that are supported by _this_ server. Can be used to
158	>	* enforce specific ciphers for incoming SSL/TLS connections.
159	>	* If a client (which also includes incoming server connections) isn't
160	>	* capable of any cipher listed below, the connection will simply be
161	>	* rejected.
162	>	*
163	>	* A list of supported ciphers can be obtained by running:
164	>	*
165	>	*      openssl ciphers -ssl3 -tls1 -v
166	>	*
167	>	* Multiple ciphers are separated by colons. The order of preference is
168	>	* from left to right.
169	>	*/
170	>	#ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
171	>
172	>	/*
173	>	* ssl_server_method:
174	>	* ssl_client_method:
175	>	*
176	>	* SSL/TLS methods we provide for incoming (server method) and
177	>	* outgoing (client method) SSL/TLS connections.
178		* This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
131	–	* SSLv2 is not suppported. This cannot be changed at runtime.
179		*/
180	<	#ssl_server_protocol = sslv3, tlsv1;
180	>	#ssl_server_method = tlsv1, sslv3;
181	>	#ssl_client_method = tlsv1;
182		};
183
184		/*
185	<	* admin {}:  contains admin information about the server. (OLD A:)
185	>	* admin {}:  contains admin information about the server
186		*/
187		admin {
188		name = "Smurf target";
#	Line 143 | Line 191 | admin {
191		};
192
193		/*
194	<	* log {}:  contains information about logfiles.
147	<	*/
148	<	log {
149	<	/* Do you want to enable logging to ircd.log? */
150	<	use_logging = yes;
151	<
152	<	/*
153	<	* logfiles: the logfiles to use for user connects, /oper uses,
154	<	* and failed /oper.  These files must exist for logging to be used.
155	<	*/
156	<	fname_userlog = "logs/userlog";
157	<	fname_operlog = "logs/operlog";
158	<	fname_killlog = "logs/kill";
159	<	fname_klinelog = "logs/kline";
160	<	fname_glinelog = "logs/gline";
161	<
162	<	/*
163	<	* log_level: the amount of detail to log in ircd.log.  The
164	<	* higher, the more information is logged.  May be changed
165	<	* once the server is running via /quote SET LOG.  Either:
166	<	* L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
167	<	*/
168	<	log_level = L_INFO;
169	<	};
170	<
171	<	/*
172	<	* class {}:  contains information about classes for users (OLD Y:)
194	>	* class {}:  contains information about classes for users
195		*/
196		class {
197	<	/* name: the name of the class.  classes are text now */
197	>	/* name: the name of the class. */
198		name = "users";
199
200		/*
#	Line 205 | Line 227 | class {
227
228		/*
229		* the following lines are optional and allow you to define
230	<	* how many users can connect from one /NN subnet
230	>	* how many users can connect from one /NN subnet.
231		*/
232		cidr_bitlen_ipv4 = 24;
233		cidr_bitlen_ipv6 = 120;
234		number_per_cidr = 16;
235
236		/*
237	<	* sendq: the amount of data allowed in a clients queue before
237	>	* sendq: the amount of data allowed in a clients send queue before
238		* they are dropped.
239		*/
240		sendq = 100 kbytes;
241	+
242	+	/*
243	+	* recvq: maximum amount of data in a clients receive queue before
244	+	* they are dropped for flooding. Defaults to 2560 if the chosen
245	+	* value isn't within the range of 512 to 8000.
246	+	*/
247	+	recvq = 2560 bytes;
248		};
249
250		class {
#	Line 223 | Line 252 | class {
252		ping_time = 90 seconds;
253		number_per_ip = 10;
254		max_number = 100;
255	<	sendq = 100kbytes;
255	>	sendq = 100 kbytes;
256	>
257	>	/*
258	>	* min_idle: minimum idle time that is shown in /whois.
259	>	*/
260	>	min_idle = 3 hours;
261	>
262	>	/*
263	>	* max_idle: maximum idle time that is shown in /whois.
264	>	*/
265	>	max_idle = 8 hours;
266	>
267	>	/*
268	>	* flags:
269	>	*
270	>	* random_idle          - idle time is randomly selected within the
271	>	*                        range of min_idle to max_idle
272	>	* hide_idle_from_opers - fake idle time will be shown to operators, too
273	>	*/
274	>	flags = random_idle, hide_idle_from_opers;
275		};
276
277		class {
#	Line 231 | Line 279 | class {
279		ping_time = 90 seconds;
280
281		/*
282	<	* ping_warning: how fast a server must reply to a PING before
235	<	* a warning to opers is generated.
236	<	*/
237	<	ping_warning = 15 seconds;
238	<
239	<	/*
240	<	* connectfreq: only used in server classes.  Specifies the delay
282	>	* connectfreq: only used in server classes. Specifies the delay
283		* between autoconnecting to servers.
284		*/
285		connectfreq = 5 minutes;
286
287	<	/* max number: the amount of servers to autoconnect to */
287	>	/* max number: the amount of servers to autoconnect to. */
288		max_number = 1;
289
290	<	/* sendq: servers need a higher sendq as they send more data */
290	>	/* sendq: servers need a higher sendq as they send more data. */
291		sendq = 2 megabytes;
292		};
293
294		/*
295	<	* listen {}:  contains information about the ports ircd listens on (OLD P:)
295	>	* listen {}:  contains information about the ports ircd listens on
296		*/
297		listen {
298		/*
299	<	* port: the specific port to listen on.  If no host is specified
299	>	* port: the specific port to listen on. If no host is specified
300		* before, it will listen on all available IPs.
301		*
302		* Ports are separated via a comma, a range may be specified using ".."
#	Line 267 | Line 309 | listen {
309		* Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
310		* unless you are an administrator.
311		*
312	<	* NOTE: The "flags" directive has to come before "port".  Always!
312	>	* NOTE: The "flags" directive has to come before "port". Always!
313		*
314		* Currently available flags are:
315		*
316	<	*  ssl    - Port is for SSL client connections only
316	>	*  ssl    - Port may only accept TLS/SSL connections
317		*  server - Only server connections are permitted
318	<	*  hidden - Port is hidden from /stats P
318	>	*  hidden - Port is hidden from /stats P, unless you're an admin
319		*/
320		flags = hidden, ssl;
321		host = "192.168.0.1";
#	Line 281 | Line 323 | listen {
323
324		/*
325		* host: set a specific IP/host the ports after the line will listen
326	<	* on.  This may be ipv4 or ipv6.
326	>	* on. This may be ipv4 or ipv6.
327		*/
328		host = "1.2.3.4";
329		port = 7000, 7001;
#	Line 291 | Line 333 | listen {
333		};
334
335		/*
336	<	* auth {}:  allow users to connect to the ircd (OLD I:)
336	>	* auth {}:  allow users to connect to the ircd
337		*/
338		auth {
339		/*
340	<	* user: the user@host allowed to connect.  Multiple IPv4/IPv6 user
340	>	* user: the user@host allowed to connect. Multiple user
341		* lines are permitted per auth block.
342		*/
343		user = "*@172.16.0.0/12";
#	Line 311 | Line 353 | auth {
353		encrypted = yes;
354
355		/*
356	<	* spoof: fake the users host to this.  This is free-form,
357	<	* just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
356	>	* spoof: fake the users host to this. This is free-form, just do
357	>	* everyone a favor and don't abuse it. ('=' prefix on /stats I)
358		*/
359		spoof = "I.still.hate.packets";
360
#	Line 320 | Line 362 | auth {
362		class = "opers";
363
364		/*
365	<	* need_password: don't allow users who haven't supplied the correct
366	<	*                password to connect using another auth{} block
367	<	*                ('&' prefix on /stats I if disabled)
368	<	* need_ident:    require the user to have identd to connect ('+' prefix on /stats I)
369	<	* spoof_notice:  enable spoofing notification to admins
370	<	* exceed_limit:  allow a user to exceed class limits ('>' prefix on /stats I)
371	<	* kline_exempt:  exempt this user from k/glines ('^' prefix on /stats I)
372	<	* gline_exempt:  exempt this user from glines ('_' prefix on /stats I)
373	<	* resv_exempt:   exempt this user from resvs ('$' prefix on /stats I)
374	<	* no_tilde:      remove ~ from a user with no ident ('-' prefix on /stats I)
375	<	* can_flood:     allow this user to exceed flood limits ('|' prefix on /stats I)
376	<	* can_idle:      exempt this user from idle restrictions ('<' prefix on /stats I)
365	>	* need_password - don't allow users who haven't supplied the correct
366	>	*                 password to connect using another auth{} block
367	>	*                 ('&' prefix on /stats I if disabled)
368	>	* need_ident    - require the user to have identd to connect ('+' prefix on /stats I)
369	>	* spoof_notice  - enable spoofing notification to admins
370	>	* exceed_limit  - allow a user to exceed class limits ('>' prefix on /stats I)
371	>	* kline_exempt  - exempt this user from k/glines ('^' prefix on /stats I)
372	>	* gline_exempt  - exempt this user from glines ('_' prefix on /stats I)
373	>	* resv_exempt   - exempt this user from resvs ('$' prefix on /stats I)
374	>	* no_tilde      - remove ~ from a user with no ident ('-' prefix on /stats I)
375	>	* can_flood     - allow this user to exceed flood limits ('|' prefix on /stats I)
376	>	* webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
377	>	*                 ('<' prefix on /stats I)
378		*/
379		flags = need_password, spoof_notice, exceed_limit, kline_exempt,
380	<	gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
380	>	gline_exempt, resv_exempt, no_tilde, can_flood;
381		};
382
383		auth {
384		/*
385	<	* redirect: the server and port to redirect a user to.  A user does
386	<	* not have to obey the redirection, the ircd just suggests an alternative
385	>	* redirect: the server and port to redirect a user to. A user does not
386	>	* have to obey the redirection, the ircd just suggests an alternative
387		* server for them.
388		*/
389		redirserv = "this.is.not.a.real.server";
#	Line 359 | Line 402 | auth {
402		};
403
404		/*
405	<	* operator {}:  defines ircd operators. (OLD O:)
363	<	*
364	<	* ircd-hybrid no longer supports local operators, privileges are
365	<	* controlled via flags.
405	>	* operator {}:  defines ircd operators
406		*/
407		operator {
408		/* name: the name of the oper */
409	<	/* NOTE: operator "opername"{} is also supported */
370	<	name = "god";
409	>	name = "sheep";
410
411		/*
412	<	* user: the user@host required for this operator.  CIDR is not
413	<	* supported.  Multiple user="" lines are supported.
412	>	* user: the user@host required for this operator. Multiple
413	>	* user="" lines are supported.
414		*/
415	<	user = "*god@*";
416	<	user = "*@127.0.0.1";
415	>	user = "*sheep@192.168.0.0/16";
416	>	user = "*@127.0.0.0/8";
417
418		/*
419	<	* password: the password required to oper.  By default this will
419	>	* password: the password required to oper. By default this will
420		* need to be encrypted by using the provided mkpasswd tool.
421		* Several password hash algorithms are available depending
422		* on your system's crypt() implementation. For example, a modern
#	Line 403 | Line 442 | operator {
442		class = "opers";
443
444		/*
445	<	* umodes: default usermodes opers get when they /oper.  If defined,
445	>	* umodes: default usermodes opers get when they /oper. If defined,
446		* it will override oper_umodes settings in general {}.
447		* Available usermodes:
448		*
#	Line 412 | Line 451 | operator {
451		* +C - cconn_full   - Client connection/quit notices full
452		* +D - deaf         - Don't receive channel messages
453		* +d - debug        - See debugging notices
454	<	* +f - full         - See I: line full notices
454	>	* +e - external     - See remote server connection and split notices
455	>	* +F - farconnect   - Remote client connection/quit notices
456	>	* +f - full         - See auth{} block full notices
457		* +G - softcallerid - Server Side Ignore for users not on your channels
458		* +g - callerid     - Server Side Ignore (for privmsgs etc)
459	+	* +H - hidden       - Hides operator status to other users
460		* +i - invisible    - Not shown in NAMES or WHO unless you share a
461		*                     a channel
462	+	* +j - rej          - See rejected client notices
463		* +k - skill        - See server generated KILL messages
464		* +l - locops       - See LOCOPS messages
465		* +n - nchange      - See client nick changes
466	<	* +r - rej          - See rejected client notices
466	>	* +R - nononreg     - Only receive private messages from registered clients
467		* +s - servnotice   - See general server notices
468		* +u - unauth       - See unauthorized client notices
469		* +w - wallop       - See server generated WALLOPS
427	–	* +x - external     - See remote server connection and split notices
470		* +y - spy          - See LINKS, STATS, TRACE notices etc.
471		* +z - operwall     - See oper generated WALLOPS
472		*/
#	Line 432 | Line 474 | operator {
474
475		/*
476		* privileges: controls the activities and commands an oper is
477	<	* allowed to do on the server.  All options default to no.
477	>	* allowed to do on the server. All options default to no.
478		* Available options:
479		*
480	<	* global_kill:  allows remote users to be /KILL'd (OLD 'O' flag)
481	<	* remote:       allows remote SQUIT and CONNECT   (OLD 'R' flag)
482	<	* remoteban:    allows remote KLINE/UNKLINE
483	<	* kline:        allows KILL, KLINE and DLINE      (OLD 'K' flag)
484	<	* unkline:      allows UNKLINE and UNDLINE        (OLD 'U' flag)
485	<	* gline:        allows GLINE                      (OLD 'G' flag)
486	<	* xline:        allows XLINE                      (OLD 'X' flag)
487	<	* operwall:     allows OPERWALL
488	<	* nick_changes: allows oper to see nickchanges    (OLD 'N' flag)
489	<	*               via usermode +n
490	<	* rehash:       allows oper to REHASH config      (OLD 'H' flag)
491	<	* die:          allows DIE and RESTART            (OLD 'D' flag)
492	<	* admin:        gives admin privileges.  admins
493	<	*               may (un)load modules and see the
494	<	*               real IPs of servers.
495	<	* hidden_admin: same as 'admin', but noone can recognize you as
496	<	*               being an admin
497	<	* hidden_oper:  not shown in /stats p (except for other operators)
456	<	*
457	<	* A flag can be negated with ~ i.e.
458	<	* flags = ~remote;
480	>	* module       - allows MODULE
481	>	* global_kill  - allows remote users to be /KILL'd
482	>	* remote       - allows remote SQUIT and CONNECT
483	>	* remoteban    - allows remote KLINE/UNKLINE
484	>	* dline        - allows DLINE
485	>	* undline      - allows UNDLINE
486	>	* kline        - allows KILL and KLINE
487	>	* unkline      - allows UNKLINE
488	>	* gline        - allows GLINE
489	>	* xline        - allows XLINE
490	>	* globops      - allows GLOBOPS
491	>	* operwall     - allows OPERWALL
492	>	* rehash       - allows oper to REHASH config
493	>	* die          - allows DIE
494	>	* restart      - allows RESTART
495	>	* set          - allows SET
496	>	* admin        - gives admin privileges. admins for example,
497	>	*                may see the real IP addresses of servers.
498		*/
499	<	flags = global_kill, remote, kline, unkline, xline,
500	<	die, rehash, nick_changes, admin, operwall;
499	>	flags = global_kill, remote, kline, unkline, xline, globops, restart,
500	>	die, rehash, admin, operwall, module;
501	>	};
502	>
503	>	/*
504	>	* service {}: specifies what server may act as a network service
505	>	*
506	>	* NOTE: it is absolutely important that every single server on the network
507	>	*       has the same service{} block.
508	>	*/
509	>	service {
510	>	name = "service.someserver";
511	>	name = "stats.someserver";
512		};
513
514		/*
515	<	* connect {}:  controls servers we connect to (OLD C:, N:, H:, L:)
515	>	* connect {}:  controls servers we connect to
516		*/
517		connect {
518		/* name: the name of the server */
519		name = "irc.uplink.com";
520
521		/*
522	<	* host: the host or IP to connect to.  If a hostname is used it
522	>	* host: the host or IP to connect to. If a hostname is used it
523		* must match the reverse dns of the server.
524		*/
525		host = "192.168.0.1";
#	Line 498 | Line 548 | connect {
548		port = 6666;
549
550		/*
551	<	* hub_mask: the mask of servers that this server may hub.  Multiple
552	<	* entries are permitted
551	>	* hub_mask: the mask of servers that this server may hub. Multiple
552	>	* entries are permitted.
553		*/
554		hub_mask = "*";
555
556		/*
557	<	* leaf_mask: the mask of servers this server may not hub.  Multiple
558	<	* entries are permitted.  Useful for forbidding EU -> US -> EU routes.
557	>	* leaf_mask: the mask of servers this server may not hub. Multiple
558	>	* entries are permitted. Useful for forbidding EU -> US -> EU routes.
559		*/
560		#       leaf_mask = "*.uk";
561
#	Line 513 | Line 563 | connect {
563		class = "server";
564
565		/*
566	<	* autoconn:    controls whether we autoconnect to this server or not,
567	<	*              dependent on class limits.  By default, this is disabled.
568	<	* compressed:  controls whether traffic is compressed via ziplinks.
569	<	*              By default, this is disabled
570	<	* cryptlink:   enable full encryption for all data passing between our
571	<	*              server and this link and rsa authentication.
572	<	* burst_away:  This will send the /away string that users have set
573	<	*              on the server burst.  Note this can be a lot of data
574	<	*              and slow down your server burst.
575	<	* topicburst:  Send topics to this server during channel burst.  Works
526	<	*              only if the server we are connecting to is capable
527	<	*              of TBURST/TB.
528	<	*/
529	<	#       flags = autoconn, compressed, cryptlink, burst_away, topicburst;
530	<	};
531	<
532	<	connect {
533	<	name = "encrypted.auth.example";
534	<	host = "some.host.somewhere";
535	<	port = 6667;
536	<
537	<	flags = cryptlink;
538	<
539	<	/*
540	<	* rsa_public_key_file: the path to the public keyfile of the server.
541	<	* Used instead of passwords.
566	>	* ssl_cipher_list:
567	>	*
568	>	* List of ciphers that the server we are connecting to must support.
569	>	* If the server isn't capable of any cipher listed below, the
570	>	* connection will simply be rejected.
571	>	* Can be used to enforce stronger ciphers, even though this option
572	>	* is not necessarily required to establish a SSL/TLS connection.
573	>	*
574	>	* Multiple ciphers are separated by colons. The order of preference
575	>	* is from left to right.
576		*/
577	<	rsa_public_key_file = "etc/remote.server.keyfile";
577	>	#ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
578
579		/*
580	<	* cipher preference: set the preferred cipher for this link
581	<	*
582	<	* Available ciphers are:
549	<	*      BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
550	<	*      RC5.12/128 RC5.8/128 3DES/168 DES/56
551	<	*
552	<	* NOTE:  Some ciphers may not be supported by your OpenSSL.
553	<	*        Check the output from 'configure' for available ciphers.
554	<	*
555	<	* NOTE2: To help you decide what cipher to use, tools/encspeed
556	<	*        will show you approximately how fast each cipher is.
557	<	*        However, blowfish is fast and secure, and is probably
558	<	*        a good default for most situations.
559	<	*
560	<	* NOTE3: Default if none is set is BF/128
561	<	*
562	<	* The cipher *MUST* be the same in both directions.  If you
563	<	* set a cipher preference, your uplink must set the same cipher,
564	<	* else it will not link.
580	>	* autoconn   - controls whether we autoconnect to this server or not,
581	>	*              dependent on class limits. By default, this is disabled.
582	>	* ssl        - Initiates a TLS/SSL connection.
583		*/
584	<	#       cipher_preference = "BF/168";
584	>	#       flags = autoconn, ssl;
585		};
586
587	<	/*
588	<	* NOTE: Don't add an extra 'name=' entry if you use
571	<	* the connect "name"{} feature
572	<	*/
573	<	connect "ipv6.some.server" {
587	>	connect {
588	>	name = "ipv6.some.server";
589		host = "3ffd:dead:beef::1";
590		send_password = "password";
591		accept_password = "password";
#	Line 586 | Line 601 | connect "ipv6.some.server" {
601
602		/*
603		* cluster {}:  servers that share klines/unkline/xline/unxline/resv/unresv/locops
604	<	* automatically (OLD hyb6 SLAVE_SERVERS)
604	>	* automatically
605		*/
606		cluster {
607		/*
#	Line 604 | Line 619 | cluster {
619
620		/*
621		* type: list of what to share, options are as follows:
622	<	*      kline   - share klines
623	<	*      tkline  - share temporary klines
624	<	*      unkline - share unklines
625	<	*      xline   - share xlines
626	<	*      txline  - share temporary xlines
627	<	*      unxline - share unxlines
628	<	*      resv    - share resvs
629	<	*      tresv   - share temporary resvs
630	<	*      unresv  - share unresvs
631	<	*      locops  - share locops
617	<	*      all     - share all of the above (default)
622	>	*      dline   - share dlines
623	>	*      undline - share undlines
624	>	*      kline   - share klines
625	>	*      unkline - share unklines
626	>	*      xline   - share xlines
627	>	*      unxline - share unxlines
628	>	*      resv    - share resvs
629	>	*      unresv  - share unresvs
630	>	*      locops  - share locops
631	>	*      all     - share all of the above (default)
632		*/
633		type = kline, unkline, locops, xline, resv;
634		};
635
636		/*
637	<	* shared {}: users that are allowed to remote kline (OLD U:)
637	>	* shared {}: users that are allowed to remote kline
638		*
639		* NOTE: This can be effectively used for remote klines.
640		*       Please note that there is no password authentication
641	<	*       for users setting remote klines.  You must also be
641	>	*       for users setting remote klines. You must also be
642		*       /oper'd in order to issue a remote kline.
643		*/
644		shared {
645		/*
646	<	* name: the server the user must be on to set klines.  If this is not
646	>	* name: the server the user must be on to set klines. If this is not
647		* specified, the user will be allowed to kline from all servers.
648		*/
649		name = "irc2.some.server";
650
651		/*
652	<	* user: the user@host mask that is allowed to set klines.  If this is
652	>	* user: the user@host mask that is allowed to set klines. If this is
653		* not specified, all users on the server above will be allowed to set
654		* a remote kline.
655		*/
#	Line 643 | Line 657 | shared {
657
658		/*
659		* type: list of what to share, options are as follows:
660	<	*      kline   - allow oper/server to kline
661	<	*      tkline  - allow temporary klines
662	<	*      unkline - allow oper/server to unkline
663	<	*      xline   - allow oper/server to xline
664	<	*      txline  - allow temporary xlines
665	<	*      unxline - allow oper/server to unxline
666	<	*      resv    - allow oper/server to resv
667	<	*      tresv   - allow temporary resvs
654	<	*      unresv  - allow oper/server to unresv
660	>	*      dline   - allow oper/server to dline
661	>	*      undline - allow oper/server to undline
662	>	*      kline   - allow oper/server to kline
663	>	*      unkline - allow oper/server to unkline
664	>	*      xline   - allow oper/server to xline
665	>	*      unxline - allow oper/server to unxline
666	>	*      resv    - allow oper/server to resv
667	>	*      unresv  - allow oper/server to unresv
668		*      locops  - allow oper/server to locops - only used for servers that cluster
669	<	*      all     - allow oper/server to do all of the above (default)
669	>	*      all     - allow oper/server to do all of the above (default)
670		*/
671		type = kline, unkline, resv;
672		};
673
674		/*
675	<	* kill {}:  users that are not allowed to connect (OLD K:)
675	>	* kill {}:  users that are not allowed to connect
676		* Oper issued klines will be added to the specified kline config
677		*/
678		kill {
#	Line 667 | Line 680 | kill {
680		reason = "Obviously hacked account";
681		};
682
670	–	kill {
671	–	user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
672	–
673	–	/*
674	–	* NOTE: You have to set type=regex; when using a regular expression
675	–	* based user entry
676	–	*/
677	–	type = regex;
678	–	};
679	–
683		/*
684		* deny {}:  IPs that are not allowed to connect (before DNS/ident lookup)
685		* Oper issued dlines will be added to the specified dline config
#	Line 687 | Line 690 | deny {
690		};
691
692		/*
693	<	* exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:)
693	>	* exempt {}:  IPs that are exempt from deny {} and Dlines
694		*/
695		exempt {
696		ip = "192.168.0.0/16";
697		};
698
699		/*
700	<	* resv {}:  nicks and channels users may not use/join (OLD Q:)
700	>	* resv {}:  nicks and channels users may not use/join
701		*/
702	+	resv { mask = "clone*"; reason = "Clone bots"; };
703	+	resv { mask = "ChanServ"; reason = "Reserved for services"; };
704	+	resv { mask = "NickServ"; reason = "Reserved for services"; };
705	+	resv { mask = "OperServ"; reason = "Reserved for services"; };
706	+	resv { mask = "MemoServ"; reason = "Reserved for services"; };
707	+	resv { mask = "BotServ"; reason = "Reserved for services"; };
708	+	resv { mask = "HelpServ"; reason = "Reserved for services"; };
709	+	resv { mask = "HostServ"; reason = "Reserved for services"; };
710	+	resv { mask = "StatServ"; reason = "Reserved for services"; };
711	+	resv { mask = "#*services*"; reason = "Reserved for services"; };
712	+
713		resv {
714	<	/* reason: the reason for the proceeding resv's */
715	<	reason = "There are no services on this network";
714	>	/*
715	>	* mask: masks starting with a '#' are automatically considered
716	>	* as channel name mask.
717	>	*/
718	>	mask = "#helsinki";
719	>	reason = "Channel is reserved for finnish inhabitants";
720
721	<	/* resv: the nicks and channels users may not join/use */
722	<	nick = "nickserv";
723	<	nick = "chanserv";
724	<	channel = "#services";
725	<
726	<	/* resv: wildcard masks are also supported in nicks only */
709	<	reason = "Clone bots";
710	<	nick = "clone*";
721	>	/*
722	>	* exempt: can be either a ISO 3166 alpha-2 two letter country
723	>	* code, or a nick!user@host mask. CIDR is supported. Exempt
724	>	* entries can be stacked.
725	>	*/
726	>	exempt = "FI";
727		};
728
729		/*
730	<	* gecos {}:  The X: replacement, used for banning users based on
715	<	* their "realname".
730	>	* gecos {}:  Used for banning users based on their "realname".
731		*/
732		gecos {
733		name = "*sex*";
#	Line 724 | Line 739 | gecos {
739		reason = "Trojan drone";
740		};
741
727	–	gecos {
728	–	name = "*http*";
729	–	reason = "Spambot";
730	–	};
731	–
732	–	gecos {
733	–	name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
734	–
735	–	/*
736	–	* NOTE: You have to set type=regex; when using a regular expression
737	–	* based name entry
738	–	*/
739	–	type = regex;
740	–	};
741	–
742		/*
743		* channel {}:  The channel block contains options pertaining to channels
744		*/
#	Line 752 | Line 752 | channel {
752		*   3 | mirc color
753		*  15 | plain text
754		*  22 | reverse
755	+	*  29 | italic
756		*  31 | underline
757		* 160 | non-breaking space
758		*/
759		disable_fake_channels = yes;
760
761		/*
761	–	* restrict_channels: reverse channel RESVs logic, only reserved
762	–	* channels are allowed
763	–	*/
764	–	restrict_channels = no;
765	–
766	–	/*
767	–	* disable_local_channels: prevent users from joining &channels.
768	–	*/
769	–	disable_local_channels = no;
770	–
771	–	/*
772	–	* use_invex: Enable/disable channel mode +I, a n!u@h list of masks
773	–	* that can join a +i channel without an invite.
774	–	*/
775	–	use_invex = yes;
776	–
777	–	/*
778	–	* use_except: Enable/disable channel mode +e, a n!u@h list of masks
779	–	* that can join a channel through a ban (+b).
780	–	*/
781	–	use_except = yes;
782	–
783	–	/*
784	–	* use_knock: Allows users to request an invite to a channel that
785	–	* is locked somehow (+ikl).  If the channel is +p or you are banned
786	–	* the knock will not be sent.
787	–	*/
788	–	use_knock = yes;
789	–
790	–	/*
762		* knock_delay: The amount of time a user must wait between issuing
763		* the knock command.
764		*/
#	Line 800 | Line 771 | channel {
771		knock_delay_channel = 1 minute;
772
773		/*
803	–	* burst_topicwho: enable sending of who set topic on topicburst
804	–	* default is yes
805	–	*/
806	–	burst_topicwho = yes;
807	–
808	–	/*
774		* max_chans_per_user: The maximum number of channels a user can
775		* join/be on.
776		*/
777		max_chans_per_user = 25;
778
779	<	/* quiet_on_ban: stop banned people talking in channels. */
780	<	quiet_on_ban = yes;
779	>	/*
780	>	* max_chans_per_oper: The maximum number of channels an oper can
781	>	* join/be on.
782	>	*/
783	>	max_chans_per_oper = 50;
784
785		/* max_bans: maximum number of +b/e/I modes in a channel */
786	<	max_bans = 25;
786	>	max_bans = 100;
787
788		/*
789		* how many joins in how many seconds constitute a flood, use 0 to
#	Line 835 | Line 803 | channel {
803
804		/*
805		* default_split_user_count: when the usercount is lower than this level,
806	<	* consider ourselves split.  This must be set for automatic splitmode.
806	>	* consider ourselves split. This must be set for automatic splitmode.
807		*/
808		default_split_user_count = 0;
809
810		/*
811		* default_split_server_count: when the servercount is lower than this,
812	<	* consider ourselves split.  This must be set for automatic splitmode.
812	>	* consider ourselves split. This must be set for automatic splitmode.
813		*/
814		default_split_server_count = 0;
815
#	Line 859 | Line 827 | channel {
827		serverhide {
828		/*
829		* flatten_links: this option will show all servers in /links appear
830	<	* that they are linked to this current server
830	>	* that they are linked to this current server.
831		*/
832		flatten_links = no;
833
#	Line 871 | Line 839 | serverhide {
839
840		/*
841		* hidden: hide this server from a /links output on servers that
842	<	* support it.  This allows hub servers to be hidden etc.
842	>	* support it. This allows hub servers to be hidden etc.
843		*/
844		hidden = no;
845
846		/*
879	–	* disable_hidden: prevent servers hiding themselves from a
880	–	* /links output.
881	–	*/
882	–	disable_hidden = no;
883	–
884	–	/*
847		* hide_servers: hide remote servernames everywhere and instead use
848		* hidden_name and network_desc.
849		*/
850		hide_servers = no;
851
852		/*
853	+	* hide_services: define this if you want to hide the location of
854	+	* services servers that are specified in the service{} block.
855	+	*/
856	+	hide_services = no;
857	+
858	+	/*
859		* Use this as the servername users see if hide_servers = yes.
860		*/
861		hidden_name = "*.hidden.com";
#	Line 902 | Line 870 | serverhide {
870		* logfiles.
871		*
872		* We recommend you leave this disabled, and just take care with who you
873	<	* give admin=yes; to.
873	>	* give administrator privileges to.
874		*/
875		hide_server_ips = no;
876		};
877
878		/*
879		* general {}:  The general block contains many of the options that were once
880	<	* compiled in options in config.h.  The general block is read at start time.
880	>	* compiled in options in config.h
881		*/
882		general {
883	+	/* services_name: servername of nick/channel services */
884	+	services_name = "service.someserver";
885	+
886		/* max_watch: maximum WATCH entries a client can have. */
887		max_watch = 60;
888
889	+	/* gline_enable: enable glines, network wide temp klines. */
890	+	gline_enable = yes;
891	+
892		/*
893	<	* gline_min_cidr: the minimum required length of a CIDR bitmask
894	<	* for IPv4 based glines
893	>	* gline_duration: the amount of time a gline will remain on your
894	>	* server before expiring.
895		*/
896	<	gline_min_cidr = 16;
896	>	gline_duration = 1 day;
897
898		/*
899	<	* gline_min_cidr6: the minimum required length of a CIDR bitmask
900	<	* for IPv6 based glines
899	>	* gline_request_duration: how long a pending G-line can be around.
900	>	* 10 minutes should be plenty.
901		*/
902	<	gline_min_cidr6 = 48;
902	>	gline_request_duration = 10 minutes;
903
904		/*
905	<	* Whether to automatically set mode +i on connecting users.
905	>	* gline_min_cidr: the minimum required length of a CIDR bitmask
906	>	* for IPv4 based glines.
907		*/
908	<	invisible_on_connect = yes;
908	>	gline_min_cidr = 16;
909
910		/*
911	<	* If you don't explicitly specify burst_away in your connect blocks, then
912	<	* they will default to the burst_away value below.
911	>	* gline_min_cidr6: the minimum required length of a CIDR bitmask
912	>	* for IPv6 based glines.
913		*/
914	<	burst_away = no;
914	>	gline_min_cidr6 = 48;
915
916		/*
917	<	* Show "actually using host <ip>" on /whois when possible.
917	>	* Whether to automatically set mode +i on connecting users.
918		*/
919	<	use_whois_actually = yes;
919	>	invisible_on_connect = yes;
920
921		/*
922	<	* Max time from the nickname change that still causes KILL
923	<	* automatically to switch for the current nick of that user.
922	>	* kill_chase_time_limit: maximum time from the nickname change that
923	>	* still causes KILL automatically to switch for the current nick of
924	>	* that user.
925		*/
926		kill_chase_time_limit = 90 seconds;
927
928		/*
929	<	* If hide_spoof_ips is disabled, opers will be allowed to see the real IP of spoofed
930	<	* users in /trace etc.  If this is defined they will be shown a masked IP.
929	>	* hide_spoof_ips: if disabled, opers will be allowed to see the real
930	>	* IP of spoofed users in /trace etc. If this is defined they will be
931	>	* shown a masked IP.
932		*/
933		hide_spoof_ips = yes;
934
935		/*
936	<	* Ignore bogus timestamps from other servers.  Yes, this will desync
937	<	* the network, but it will allow chanops to resync with a valid non TS 0
936	>	* Ignore bogus timestamps from other servers. Yes, this will desync the
937	>	* network, but it will allow chanops to resync with a valid non TS 0
938		*
939		* This should be enabled network wide, or not at all.
940		*/
#	Line 969 | Line 946 | general {
946		*/
947		disable_auth = no;
948
949	<	/* disable_remote_commands: disable users doing commands on remote servers */
949	>	/* disable_remote_commands: disable users doing commands on remote servers. */
950		disable_remote_commands = no;
951
952		/*
#	Line 980 | Line 957 | general {
957
958		/*
959		* default_floodcount: the default value of floodcount that is configurable
960	<	* via /quote set floodcount.  This is the amount of lines a user
960	>	* via /quote set floodcount. This is the amount of lines a user
961		* may send to any other user/channel in one second.
962		*/
963		default_floodcount = 10;
#	Line 999 | Line 976 | general {
976
977		/*
978		* min_nonwildcard: the minimum non wildcard characters in k/d/g lines
979	<	* placed via the server.  klines hand placed are exempt from limits.
979	>	* placed via the server. K-lines hand placed are exempt from limits.
980		* wildcard chars: '.' ':' '*' '?' '@' '!' '#'
981		*/
982		min_nonwildcard = 4;
983
984		/*
985		* min_nonwildcard_simple: the minimum non wildcard characters in
986	<	* gecos bans.  wildcard chars: '*' '?' '#'
986	>	* gecos bans. wildcard chars: '*' '?' '#'
987		*/
988		min_nonwildcard_simple = 3;
989
990	<	/* max_accept: maximum allowed /accept's for +g usermode */
990	>	/* max_accept: maximum allowed /accept's for +g usermode. */
991		max_accept = 20;
992
993	<	/* anti_nick_flood: enable the nickflood control code */
993	>	/* anti_nick_flood: enable the nickflood control code. */
994		anti_nick_flood = yes;
995
996		/* nick flood: the nick changes allowed in the specified period */
#	Line 1028 | Line 1005 | general {
1005
1006		/*
1007		* ts delta: the time delta allowed between server clocks before
1008	<	* a warning is given, or before the link is dropped.  all servers
1008	>	* a warning is given, or before the link is dropped. All servers
1009		* should run ntpdate/rdate to keep clocks in sync
1010		*/
1011		ts_warn_delta = 30 seconds;
1012		ts_max_delta = 5 minutes;
1013
1014		/*
1038	–	* kline_with_reason: show the user the reason why they are k/d/glined
1039	–	* on exit.  May give away who set k/dline when set via tcm.
1040	–	*/
1041	–	kline_with_reason = yes;
1042	–
1043	–	/*
1044	–	* kline_reason: show this message to users on channel
1045	–	* instead of the oper reason.
1046	–	*/
1047	–	kline_reason = "Connection closed";
1048	–
1049	–	/*
1050	–	* reject_hold_time: wait this amount of time before disconnecting
1051	–	* a rejected client. Use 0 to disable.
1052	–	*/
1053	–	reject_hold_time = 0;
1054	–
1055	–	/*
1015		* warn_no_nline: warn opers about servers that try to connect but
1016	<	* we don't have a connect {} block for.  Twits with misconfigured
1016	>	* we don't have a connect {} block for. Twits with misconfigured
1017		* servers can get really annoying with this enabled.
1018		*/
1019		warn_no_nline = yes;
1020
1021		/*
1022		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1023	<	* operators and administrators.  Doing so is a good idea in case
1023	>	* operators and administrators. Doing so is a good idea in case
1024		* there are any exempted (exempt{}) server IPs you don't want to
1025		* see leaked.
1026		*/
#	Line 1074 | Line 1033 | general {
1033		stats_P_oper_only = yes;
1034
1035		/*
1036	<	* stats i oper only: make stats i (auth {}) oper only. set to:
1037	<	*     yes:    show users no auth blocks, made oper only.
1038	<	*     masked: show users first matching auth block
1039	<	*     no:     show users all auth blocks.
1036	>	* stats i oper only: make stats i (auth {}) oper only. Set to:
1037	>	*     yes    - show users no auth blocks, made oper only.
1038	>	*     masked - show users first matching auth block
1039	>	*     no     - show users all auth blocks.
1040		*/
1041		stats_i_oper_only = yes;
1042
1043		/*
1044	<	* stats_k_oper_only: make stats k/K (klines) oper only.  set to:
1045	<	*     yes:    show users no auth blocks, made oper only
1046	<	*     masked: show users first matching auth block
1047	<	*     no:     show users all auth blocks.
1044	>	* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1045	>	*     yes    - show users no auth blocks, made oper only
1046	>	*     masked - show users first matching auth block
1047	>	*     no     - show users all auth blocks.
1048		*/
1049		stats_k_oper_only = yes;
1050
#	Line 1109 | Line 1068 | general {
1068
1069		/*
1070		* pace_wait: time between more intensive commands
1071	<	* (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1071	>	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1072		*/
1073		pace_wait = 10 seconds;
1074
#	Line 1130 | Line 1089 | general {
1089
1090		/*
1091		* true_no_oper_flood: completely eliminate flood limits for opers
1092	<	* and for clients with can_flood = yes in their auth {} blocks
1092	>	* and for clients with can_flood = yes in their auth {} blocks.
1093		*/
1094		true_no_oper_flood = yes;
1095
1096	<	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1096	>	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1097		oper_pass_resv = yes;
1098
1140	–	/*
1141	–	* idletime: the maximum amount of time a user may idle before
1142	–	* they are disconnected
1143	–	*/
1144	–	idletime = 0;
1145	–
1099		/* REMOVE ME.  The following line checks you've been reading. */
1100		havent_read_conf = 1;
1101
1102		/*
1103		* max_targets: the maximum amount of targets in a single
1104	<	* PRIVMSG/NOTICE.  Set to 999 NOT 0 for unlimited.
1104	>	* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1105		*/
1106		max_targets = 4;
1107
1108		/*
1156	–	* client_flood: maximum amount of data in a clients queue before
1157	–	* they are dropped for flooding.
1158	–	*/
1159	–	client_flood = 2560 bytes;
1160	–
1161	–	/*
1162	–	* message_locale: the default message locale
1163	–	* Use "standard" for the compiled in defaults.
1164	–	* To install the translated messages, go into messages/ in the
1165	–	* source directory and run `make install'.
1166	–	*/
1167	–	message_locale = "standard";
1168	–
1169	–	/*
1109		* usermodes configurable: a list of usermodes for the options below
1110		*
1111		* +b - bots         - See bot and drone flooding notices
#	Line 1174 | Line 1113 | general {
1113		* +C - cconn_full   - Client connection/quit notices full
1114		* +D - deaf         - Don't receive channel messages
1115		* +d - debug        - See debugging notices
1116	<	* +f - full         - See I: line full notices
1116	>	* +e - external     - See remote server connection and split notices
1117	>	* +F - farconnect   - Remote client connection/quit notices
1118	>	* +f - full         - See auth{} block full notices
1119		* +G - softcallerid - Server Side Ignore for users not on your channels
1120		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1121	+	* +H - hidden       - Hides operator status to other users
1122		* +i - invisible    - Not shown in NAMES or WHO unless you share a
1123		*                     a channel
1124	+	* +j - rej          - See rejected client notices
1125		* +k - skill        - See server generated KILL messages
1126		* +l - locops       - See LOCOPS messages
1127		* +n - nchange      - See client nick changes
1128	<	* +r - rej          - See rejected client notices
1128	>	* +R - nononreg     - Only receive private messages from registered clients
1129		* +s - servnotice   - See general server notices
1130		* +u - unauth       - See unauthorized client notices
1131		* +w - wallop       - See server generated WALLOPS
1189	–	* +x - external     - See remote server connection and split notices
1132		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1133		* +z - operwall     - See oper generated WALLOPS
1134		*/
1135
1136		/* oper_only_umodes: usermodes only opers may set */
1137	<	oper_only_umodes = bots, cconn, cconn_full, debug, full, skill,
1137	>	oper_only_umodes = bots, cconn, cconn_full, debug, full, hidden, skill,
1138		nchange, rej, spy, external, operwall,
1139	<	locops, unauth;
1139	>	locops, unauth, farconnect;
1140
1141		/* oper_umodes: default usermodes opers get when they /oper */
1142		oper_umodes = bots, locops, servnotice, operwall, wallop;
1143
1144		/*
1203	–	* servlink_path: path to 'servlink' program used by ircd to handle
1204	–	* encrypted/compressed server <-> server links.
1205	–	*
1206	–	* only define if servlink is not in same directory as ircd itself.
1207	–	*/
1208	–	#servlink_path = "/usr/local/ircd/bin/servlink";
1209	–
1210	–	/*
1211	–	* default_cipher_preference: default cipher to use for cryptlink when none is
1212	–	* specified in connect block.
1213	–	*/
1214	–	#default_cipher_preference = "BF/168";
1215	–
1216	–	/*
1145		* use_egd: if your system does not have *random devices yet you
1146	<	* want to use OpenSSL and encrypted links, enable this.  Beware -
1147	<	* EGD is *very* CPU intensive when gathering data for its pool
1146	>	* want to use OpenSSL and encrypted links, enable this. Beware -
1147	>	* EGD is *very* CPU intensive when gathering data for its pool.
1148		*/
1149		#       use_egd = yes;
1150
#	Line 1226 | Line 1154 | general {
1154		*/
1155		#       egdpool_path = "/var/run/egd-pool";
1156
1229	–
1230	–	/*
1231	–	* compression_level: level of compression for compressed links between
1232	–	* servers.
1233	–	*
1234	–	* values are between: 1 (least compression, fastest)
1235	–	*                and: 9 (most compression, slowest).
1236	–	*/
1237	–	#       compression_level = 6;
1238	–
1157		/*
1158		* throttle_time: the minimum amount of time between connections from
1159	<	* the same ip.  exempt {} blocks are excluded from this throttling.
1160	<	* Offers protection against flooders who reconnect quickly.
1159	>	* the same ip. exempt {} blocks are excluded from this throttling.
1160	>	* Offers protection against flooders who reconnect quickly.
1161		* Set to 0 to disable.
1162		*/
1163		throttle_time = 10;
1164		};
1165
1248	–	glines {
1249	–	/* enable: enable glines, network wide temp klines */
1250	–	enable = yes;
1251	–
1252	–	/*
1253	–	* duration: the amount of time a gline will remain on your
1254	–	* server before expiring
1255	–	*/
1256	–	duration = 1 day;
1257	–
1258	–	/*
1259	–	* logging: which types of rules you want to log when triggered
1260	–	* (choose reject or block)
1261	–	*/
1262	–	logging = reject, block;
1263	–
1264	–	/*
1265	–	* NOTE: gline ACLs can cause a desync of glines throughout the
1266	–	* network, meaning some servers may have a gline triggered, and
1267	–	* others may not. Also, you only need insert rules for glines
1268	–	* that you want to block and/or reject. If you want to accept and
1269	–	* propagate the gline, do NOT put a rule for it.
1270	–	*/
1271	–
1272	–	/* user@host for rule to apply to */
1273	–	user = "god@I.still.hate.packets";
1274	–	/* server for rule to apply to */
1275	–	name = "hades.arpa";
1276	–
1277	–	/*
1278	–	* action: action to take when a matching gline is found. options are:
1279	–	*  reject      - do not apply the gline locally
1280	–	*  block       - do not propagate the gline
1281	–	*/
1282	–	action = reject, block;
1283	–
1284	–	user = "god@*";
1285	–	name = "*";
1286	–	action = block;
1287	–	};
1288	–
1166		modules {
1167		/*
1168		* path: other paths to search for modules specified below
1169	<	* and in /modload.
1169	>	* and in "/module load".
1170		*/
1171		path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1172		path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1173
1174	<	/* module: the name of a module to load on startup/rehash */
1174	>	/* module: the name of a module to load on startup/rehash. */
1175		#module = "some_module.la";
1176		};
1177	+
1178	+	/*
1179	+	* log {}:  contains information about logfiles.
1180	+	*/
1181	+	log {
1182	+	/* Do you want to enable logging to ircd.log? */
1183	+	use_logging = yes;
1184	+
1185	+	file {
1186	+	type = oper;
1187	+	name = "/home/ircd/var/log/oper.log";
1188	+	size = unlimited;
1189	+	};
1190	+
1191	+	file {
1192	+	type = user;
1193	+	name = "/home/ircd/var/log/user.log";
1194	+	size = 50 megabytes;
1195	+	};
1196	+
1197	+	file {
1198	+	type = kill;
1199	+	name = "/home/ircd/var/log/kill.log";
1200	+	size = 50 megabytes;
1201	+	};
1202	+
1203	+	file {
1204	+	type = kline;
1205	+	name = "/home/ircd/var/log/kline.log";
1206	+	size = 50 megabytes;
1207	+	};
1208	+
1209	+	file {
1210	+	type = dline;
1211	+	name = "/home/ircd/var/log/dline.log";
1212	+	size = 50 megabytes;
1213	+	};
1214	+
1215	+	file {
1216	+	type = gline;
1217	+	name = "/home/ircd/var/log/gline.log";
1218	+	size = 50 megabytes;
1219	+	};
1220	+
1221	+	file {
1222	+	type = debug;
1223	+	name = "/home/ircd/var/log/debug.log";
1224	+	size = 50 megabytes;
1225	+	};
1226	+	};

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)