trunk/doc/reference.conf

/*
 * This is an example configuration file for ircd-hybrid
 *
 * Copyright (c) 1997-2016 ircd-hybrid development team
 *
 * $Id$
 */

/*
 * ########################################################################
 * IMPORTANT NOTE:
 *
 * auth {} blocks MUST be specified in order of precedence. The first one
 * that matches a user will be used. So place spoofs first, then specials,
 * then general access.
 * ########################################################################
 *
 * Shell style (#), C++ style (//) and C style comments are supported.
 *
 * Files may be included by either:
 *        .include "filename"
 *        .include <filename>
 *
 * Times/durations are written as:
 *        12 hours 30 minutes 1 second
 *
 * Valid units of time:
 *        year, month, week, day, hour, minute, second
 *
 * Valid units of size:
 *        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
 *
 * Sizes and times may be singular or plural.
 */


/*
 * serverinfo {}:  contains information about the server
 */
serverinfo {
        /*
         * name: the name of this server. This cannot be changed at runtime.
         */
        name = "server.example.net";

        /*
         * sid: a server's unique ID. This is three characters long and must
         * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
         * a digit, followed by 2 alpha-numerical letters.
         *
         * NOTE: The letters must be capitalized. This cannot be changed at runtime.
         *
         * A sid is automatically generated at runtime, if you want to configure
         * a specific sid, uncomment the following line.
         */
#       sid = "0HY";

        /*
         * description: the description of the server.
         */
        description = "ircd-hybrid test server";

        /*
         * network_name, network_desc: the name and description of the network this
         * server is on. Shown in the 005 reply and used with serverhiding.
         */
        network_name = "MyNet";
        network_desc = "This is My Network";

        /*
         * hub: allow this server to act as a hub and have multiple servers
         * connected to it.
         */
        hub = no;

        /*
         * vhost: the IP address to bind to when connecting outward to IPv4 servers.
         * This should be an IPv4 address, or "*" for INADDR_ANY.
         */
#       vhost = "192.0.2.1";

        /*
         * vhost6: the IP address to bind to when connecting outward to IPv6 servers.
         * This should be an IPv6 address, or "*" for in6addr_any.
         */
#       vhost6 = "2001:DB8::1";

        /*
         * default_max_clients: the default maximum number of clients allowed
         * to connect. This can be changed from within IRC via /QUOTE SET MAX.
         */
        default_max_clients = 512;

        /*
         * max_nick_length: only applies to local clients. Must be in the
         * range of 9 to 30. Default is 9 if nothing else is specified.
         */
        max_nick_length = 9;

        /*
         * max_topic_length: only applies to topics set by local clients.
         * Must be in the range of 80 to 300. Default is 80 if nothing
         * else is specified.
         */
        max_topic_length = 160;

        /*
         * libgeoip_database_options: used to control the libGeoIP database handling.
         *
         * Available options:
         *
         * standard     - Read database from file system. This uses the least memory.
         * memory_cache - Load database into memory. Provides faster performance but
         *                uses more memory.
         * mmap_cache   - Load database into mmap shared memory.
         * check_cache  - Check for updated database. If database has been updated,
         *                reload file handle and/or memory cache.
         */
#       libgeoip_database_options = memory_cache, check_cache;

        /*
         * libgeoip_ipv4_database_file: the path to the GeoIP IPv4 database file.
         */
#       libgeoip_ipv4_database_file = "etc/GeoIP.dat";

        /*
         * libgeoip_ipv6_database_file: the path to the GeoIP IPv6 database file.
         */
#       libgeoip_ipv6_database_file = "etc/GeoIPv6.dat";

        /*
         * rsa_private_key_file: the path to the file containing the RSA key.
         *
         * Example commands to store a 2048 bit RSA key in rsa.key:
         *
         * OpenSSL/LibreSSL:
         *    openssl genrsa -out rsa.key 2048
         *
         * GnuTLS:
         *    certtool --generate-privkey --sec-param=medium --outfile rsa.key
         *
         * Once the RSA key is generated, it is highly recommended to lock down
         * its file permissions:
         *
         *    chown <ircd-user>.<ircd.group> rsa.key
         *    chmod 0600 rsa.key
         */
#       rsa_private_key_file = "etc/rsa.key";

        /*
         * ssl_certificate_file: the path to the file containing our
         * SSL certificate for encrypted client connection.
         *
         * This assumes your private RSA key is stored in rsa.key. You
         * MUST have an RSA key in order to generate the certificate.
         *
         * Example command:
         *
         * OpenSSL/LibreSSL:
         *    openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
         *
         * GnuTLS:
         *    certtool --generate-self-signed --load-privkey rsa.key --outfile cert.pem
         */
#       ssl_certificate_file = "etc/cert.pem";

        /*
         * ssl_dh_param_file: the path to the PEM encoded Diffie-Hellman
         * parameter file. DH parameters are required when using
         * ciphers with EDH (ephemeral Diffie-Hellman) key exchange.
         *
         * A DH parameter file can be created by running:
         *
         * OpenSSL/LibreSSL:
         *    openssl dhparam -out dhparam.pem 2048
         *
         * GnuTLS:
         *    certtool --generate-dh-params --sec-param=medium --outfile dhparam.pem
         */
#       ssl_dh_param_file = "etc/dhparam.pem";

        /*
         * ssl_dh_elliptic_curve: defines the curve to use for the
         * Elliptic Curve Diffie-Hellman (ECDH) algorithm.
         * Default is ANSI X9.62 prime256v1/secp256r1 if nothing else is specified.
         *
         * A list of curves supported by OpenSSL can be obtained by running:
         *
         *    openssl ecparam -list_curves
         *
         * This directive currently doesn't do anything with GnuTLS support.
         */
#       ssl_dh_elliptic_curve = "secp521r1";

        /*
         * ssl_cipher_list: list of ciphers to support on _this_ server.
         * Can be used to enforce specific ciphers for incoming SSL/TLS
         * connections. If a client (which also includes incoming server
         * connections) is not capable of using any of the ciphers listed
         * here, the connection will simply be rejected.
         *
         * A list of supported ciphers can be obtained by running:
         *
         * OpenSSL/LibreSSL:
         *    openssl ciphers -tls1 -v
         *
         * GnuTLS:
         *    gnutls-cli --list
         *
         * Multiple ciphers are separated by colons. The order of preference is
         * from left to right.
         */
#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";

        /*
         * ssl_message_digest_algorithm: defines which cryptographic hash function
         * to use for generating fingerprint hashes of X.509 certificates.
         * Default is SHA-256 if nothing else is specified.
         *
         * A list of supported message digest algorithms can be obtained by running:
         *
         * OpenSSL/LibreSSL:
         *    openssl list-message-digest-algorithms
         *
         * GnuTLS:
         *    gnutls-cli --list
         */
#       ssl_message_digest_algorithm = "sha256";
};

/*
 * admin {}:  contains administrative information about the server
 */
admin {
        name = "Smurf target";
        description = "Main Server Administrator";
        email = "<admin@server.example.net>";
};

/*
 * class {}:  contains information about classes for users
 */
class {
        /* name: the name of the class. */
        name = "users";

        /*
         * ping_time: how often a client must reply to a PING from the
         * server before they are dropped.
         */
        ping_time = 90 seconds;

        /*
         * number_per_ip: how many local users are allowed to connect
         * from a single IP address (optional)
         */
        number_per_ip = 2;

        /*
         * max_local: how many local users are allowed to connect
         * from a single ident@host (optional)
         */
        max_local = 2;

        /*
         * max_global: network-wide limit of users per ident@host (optional)
         */
        max_global = 10;

        /*
         * max_number: the maximum number of users allowed in this class (optional)
         */
        max_number = 100;

        /*
         * The following lines are optional and allow you to define
         * how many users can connect from one /NN subnet.
         */
        cidr_bitlen_ipv4 = 24;
        cidr_bitlen_ipv6 = 120;
        number_per_cidr = 16;

        /*
         * sendq: the amount of data allowed in a client's send queue before
         * they are dropped.
         */
        sendq = 100 kbytes;

        /*
         * recvq: the amount of data allowed in a client's receive queue before
         * they are dropped for flooding. Defaults to 2560 if the chosen value
         * isn't within the range of 512 to 8000.
         */
        recvq = 2560 bytes;
};

class {
        name = "opers";
        ping_time = 90 seconds;
        number_per_ip = 10;
        max_number = 100;
        sendq = 100 kbytes;

        /*
         * max_channels: maximum number of channels users in this class can join.
         */
        max_channels = 60;

        /*
         * min_idle: minimum idle time that is shown in WHOIS.
         */
        min_idle = 3 hours;

        /*
         * max_idle: maximum idle time that is shown in WHOIS.
         */
        max_idle = 8 hours;

        /*
         * flags:
         *
         * random_idle          - a fake idle time is set randomly between
         *                        min_idle and max_idle
         * hide_idle_from_opers - the fake idle time will also be shown to operators
         */
        flags = random_idle, hide_idle_from_opers;
};

class {
        name = "server";
        ping_time = 90 seconds;

        /*
         * connectfreq: only used in server classes. Specifies the delay
         * between autoconnecting to servers.
         */
        connectfreq = 5 minutes;

        /* max number: the number of servers to autoconnect to. */
        max_number = 1;

        /* sendq: servers need a higher sendq as they send more data. */
        sendq = 2 megabytes;
};

/*
 * motd {}: Allows the display of a different MOTD to a client
 * depending on its origin. Applies to local users only.
 */
motd {
        /*
         * mask: multiple mask entries are permitted. Mask can either be
         * a class name or a hostname. CIDR is supported.
         */
        mask = "*.at";
        mask = "*.de";
        mask = "*.ch";

        /*
         * file: path to the motd file.
         */
        file = "etc/german.motd";
};

/*
 * listen {}:  contains information about the ports ircd listens on
 */
listen {
        /*
         * port: the port to listen on. If no host is specified earlier in the
         * listen {} block, it will listen on all available IP addresses.
         *
         * Ports are separated by commas; a range may be specified using ".."
         */

        /* port: listen on all available IP addresses, ports 6665 to 6669. */
        port = 6665 .. 6669;

        /*
         * Listen on 192.0.2.2/6697 with SSL enabled and hidden from STATS P
         * unless you are an administrator.
         *
         * NOTE: The "flags" directive always has to come before "port".
         *
         * Currently available flags are:
         *
         *  ssl    - Port may only accept TLS/SSL connections
         *  server - Only server connections are permitted
         *  hidden - Port is hidden from /stats P, unless you're an admin
         */
        flags = hidden, ssl;
        host = "192.0.2.2";
        port = 6697;

        /*
         * host: set a specific IP address to listen on using the
         * subsequent port definitions. This may be IPv4 or IPv6.
         */
        host = "192.0.2.3";
        port = 7000, 7001;

        host = "2001:DB8::2";
        port = 7002;
};

/*
 * auth {}:  allow users to connect to the ircd
 */
auth {
        /*
         * user: the user@host allowed to connect. Multiple user
         * lines are permitted within each auth {} block.
         */
        user = "*@192.0.2.0/24";
        user = "*test@2001:DB8:*";

        /* password: an optional password that is required to use this block. */
        password = "letmein";

        /*
         * encrypted: indicates whether the auth password above has been
         * encrypted. Default is 'no' if nothing else is specified.
         */
        encrypted = yes;

        /*
         * spoof: fake the user's host to this. This is free-form; just do
         * everyone a favor and don't abuse it. ('=' prefix on /stats I)
         */
        spoof = "I.still.hate.packets";

        /* class: the class the user is placed in. */
        class = "opers";

        /*
         * need_password - don't allow users who haven't supplied the correct  | ('&' prefix on /stats I if disabled)
         *                 password to connect using another auth {} block
         * need_ident    - require the user to have identd to connect          | ('+' prefix on /stats I)
         * spoof_notice  - enable spoofing notification to admins
         * exceed_limit  - allow a user to exceed class limits                 | ('>' prefix on /stats I)
         * kline_exempt  - exempt this user from k-lines                       | ('^' prefix on /stats I)
         * xline_exempt  - exempt this user from x-lines                       | ('!' prefix on /stats I)
         * resv_exempt   - exempt this user from resvs                         | ('$' prefix on /stats I)
         * no_tilde      - remove ~ from a user with no ident                  | ('-' prefix on /stats I)
         * can_flood     - allow this user to exceed flood limits              | ('|' prefix on /stats I)
         * webirc        - enables WEBIRC authentication for web-based         | ('<' prefix on /stats I)
         *                 clients such as Mibbit
         */
        flags = need_password, spoof_notice, exceed_limit, kline_exempt,
                xline_exempt, resv_exempt, no_tilde, can_flood;
};

auth {
        /*
         * redirserv, redirport: the server and port to redirect a user to.
         * A user does not have to obey the redirection; the ircd just
         * suggests an alternative server for them.
         */
        redirserv = "server2.example.net";
        redirport = 6667;

        user = "*@*.ch";

        /* class: a class is required even though it is not used. */
        class = "users";
};

auth {
        user = "*@*";
        class = "users";
        flags = need_ident;
};

/*
 * operator {}:  defines ircd operators
 */
operator {
        /* name: the name of the operator */
        name = "sheep";

        /*
         * user: the user@host required for this operator. Multiple user
         * lines are permitted within each operator {} block.
         */
        user = "*sheep@192.0.2.0/26";
        user = "*@192.0.2.240/28";

        /*
         * password: the password required to oper. By default this will need
         * to be encrypted using the provided mkpasswd tool.
         * The availability of various password hashing algorithms may vary
         * depending on the system's crypt(3) implementation.
         */
        password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";

        /*
         * encrypted: indicates whether the oper password above has been
         * encrypted. Default is 'yes' if nothing else is specified.
         */
        encrypted = yes;

        /*
         * ssl_certificate_fingerprint: enhances security by additionally checking
         * the oper's client certificate fingerprint against the specified
         * fingerprint below.
         *
         * Hint: your users can use the following commands to obtain a SHA-256 hash
         * of their ssl certificate:
         *
         * OpenSSL/LibreSSL:
         *    openssl x509 -sha256 -noout -fingerprint -in cert.pem | sed -e 's/^.*=//;s/://g'
         *
         * GnuTLS:
         *    certtool -i < cert.pem | egrep -A 1 'SHA256 fingerprint'
         */
#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";

        /*
         * ssl_connection_required: client must be connected over SSL/TLS
         * in order to be able to use this operator {} block.
         * Default is 'no' if nothing else is specified.
         */
        ssl_connection_required = no;

        /* class: the class the oper joins when they successfully OPER. */
        class = "opers";

        /*
         * whois: allows overriding the default RPL_WHOISOPERATOR numeric
         * string shown in WHOIS.
         * This string is propagated to all servers on the network.
         */
#       whois = "is a Smurf Target (IRC Operator)";

        /*
         * umodes: the default user modes opers get when they successfully OPER.
         * If defined, it will override oper_umodes settings in general {}.
         * Available user modes:
         *
         * +b - bots         - See bot and drone flooding notices
         * +c - cconn        - Client connection/quit notices
         * +D - deaf         - Don't receive channel messages
         * +d - debug        - See debugging notices
         * +e - external     - See remote server connection and split notices
         * +F - farconnect   - Remote client connection/quit notices
         * +f - full         - See auth {} block full notices
         * +G - softcallerid - Server Side Ignore for users not on your channels
         * +g - callerid     - Server Side Ignore (for privmsgs etc)
         * +H - hidden       - Hides IRC operator status to other users
         * +i - invisible    - Not shown in NAMES or WHO unless you share a channel
         * +j - rej          - See rejected client notices
         * +k - skill        - See server generated KILL messages
         * +l - locops       - See LOCOPS messages
         * +n - nchange      - See client nick changes
         * +p - hidechans    - Hides channel list in WHOIS
         * +q - hideidle     - Hides idle and signon time in WHOIS
         * +R - nononreg     - Only receive private messages from registered clients
         * +s - servnotice   - See general server notices
         * +u - unauth       - See unauthorized client notices
         * +w - wallop       - See server generated WALLOPS
         * +y - spy          - See LINKS, STATS, TRACE notices etc.
         */
        umodes = locops, servnotice, wallop;

        /*
         * flags: controls the activities and commands an oper is
         * allowed to do on the server. All flags default to 'no'.
         * Available flags:
         *
         * admin          - gives administrator privileges        | ('A' flag)
         * close          - allows CLOSE                          | ('B' flag)
         * connect        - allows local CONNECT                  | ('C' flag)
         * connect:remote - allows remote CONNECT                 | ('D' flag)
         * die            - allows DIE                            | ('E' flag)
         * dline          - allows DLINE                          | ('F' flag)
         * globops        - allows GLOBOPS                        | ('G' flag)
         * join:resv      - allows to JOIN resv {} channels       | ('H' flag)
         * kill           - allows to KILL local clients          | ('I' flag)
         * kill:remote    - allows remote users to be /KILL'd     | ('J' flag)
         * kline          - allows KLINE                          | ('K' flag)
         * locops         - allows LOCOPS                         | ('L' flag)
         * module         - allows MODULE                         | ('M' flag)
         * nick:resv      - allows to use NICK on resv {} nicks   | ('N' flag)
         * opme           - allows OPME                           | ('O' flag)
         * rehash         - allows oper to REHASH config          | ('P' flag)
         * rehash:remote  - allows oper to remotely REHASH config | ('Q' flag)
         * remoteban      - allows remote KLINE/UNKLINE           | ('R' flag)
         * restart        - allows RESTART                        | ('S' flag)
         * resv           - allows RESV                           | ('T' flag)
         * set            - allows SET                            | ('U' flag)
         * squit          - allows local SQUIT                    | ('V' flag)
         * squit:remote   - allows remote SQUIT                   | ('W' flag)
         * undline        - allows UNDLINE                        | ('X' flag)
         * unkline        - allows UNKLINE                        | ('Y' flag)
         * unresv         - allows UNRESV                         | ('Z' flag)
         * unxline        - allows UNXLINE                        | ('a' flag)
         * wallops        - allows WALLOPS                        | ('b' flag)
         * xline          - allows XLINE                          | ('c' flag)
         */
        flags = admin, connect, connect:remote, die, globops, kill, kill:remote,
                kline, module, rehash, restart, set, unkline, unxline, xline;
};

/*
 * connect {}: define a server to connect to
 */
connect {
        /* name: the name of the server. */
        name = "uplink.example.net";

        /*
         * host: the host or IP address to connect to. If a hostname is used,
         * it must match the reverse DNS of the server.
         */
        host = "192.0.2.4";

        /*
         * vhost: the IP address to bind to when making outgoing connections to
         * servers. serverinfo::vhost and serverinfo::vhost6 will be overridden
         * by this directive.
         */
        vhost = "192.0.2.5";

        /*
         * send_password, accept_password: the passwords to send and accept.
         * The remote server will have these passwords swapped.
         */
        send_password = "password";
        accept_password = "anotherpassword";

        /*
         * encrypted: indicates whether the accept_password above has been
         * encrypted.
         */
        encrypted = no;

        /* port: the port to connect to this server on. */
        port = 6666;

        /*
         * hub_mask: the mask of servers that this server may hub. Multiple
         * entries are permitted.
         */
        hub_mask = "*";

        /*
         * leaf_mask: the mask of servers this server may not hub. Multiple
         * entries are permitted. Useful for forbidding EU -> US -> EU routes.
         */
#       leaf_mask = "*.uk";

        /* class: the class this server is in. */
        class = "server";

        /*
         * ssl_cipher_list: list of ciphers that the server we are connecting to
         * must support. If the server is not capable of using any of the ciphers
         * listed below, the connection will simply be rejected.
         * Can be used to enforce stronger ciphers, even though this option
         * is not necessarily required to establish a SSL/TLS connection.
         *
         * Multiple ciphers are separated by colons. The order of preference
         * is from left to right.
         */
#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";

        /*
         * ssl_certificate_fingerprint: enhances security by additionally checking
         * the server's client certificate fingerprint against the specified
         * fingerprint below.
         */
#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";

        /*
         * autoconn   - controls whether we autoconnect to this server or not,
         *              dependent on class limits. By default, this is disabled.
         * ssl        - Initiates a TLS/SSL connection.
         */
#       flags = autoconn, ssl;
};

connect {
        name = "ipv6.example.net";
        host = "2001:DB8::3";
        send_password = "password";
        accept_password = "password";
        port = 6666;

        /*
         * aftype: controls whether the connection uses "ipv4" or "ipv6".
         * Default is ipv4.
         */
        aftype = ipv6;
        class = "server";
};

/*
 * cluster {}:  servers that share klines/unkline/xline/unxline/resv/unresv/locops
 * automatically
 */
cluster {
        /*
         * name: the server to share with; this can take wildcards
         *
         * NOTE: only local actions will be clustered, meaning that if
         *       the server receives a shared kline/unkline/etc, it
         *       will not be propagated to clustered servers.
         *
         *       Remote servers are not necessarily required to accept
         *       clustered lines, they need a shared {} block for *THIS*
         *       server in order to accept them.
         */
        name = "*.example.net";

        /*
         * type: list of what to share; options are as follows:
         *      dline   - share dlines
         *      undline - share undlines
         *      kline   - share klines
         *      unkline - share unklines
         *      xline   - share xlines
         *      unxline - share unxlines
         *      resv    - share resvs
         *      unresv  - share unresvs
         *      locops  - share locops
         *      all     - share all of the above (default)
         */
        type = kline, unkline, locops, xline, resv;
};

/*
 * shared {}: users that are allowed to remote kline
 *
 * NOTE: This can effectively be used for remote klines.
 *       Please note that there is no password authentication
 *       for users setting remote klines. You must also be
 *       /oper'd in order to issue a remote kline.
 */
shared {
        /*
         * name: the server the user must be connected to in order to set klines.
         * If this is not specified, the user will be allowed to kline from all
         * servers.
         */
        name = "irc2.example.net";

        /*
         * user: the user@host mask that is allowed to set klines. If this is
         * not specified, all users on the server above will be allowed to set
         * a remote kline.
         */
        user = "oper@my.host.is.spoofed";

        /*
         * type: list of what to share, options are as follows:
         *      dline   - allow oper/server to dline
         *      undline - allow oper/server to undline
         *      kline   - allow oper/server to kline
         *      unkline - allow oper/server to unkline
         *      xline   - allow oper/server to xline
         *      unxline - allow oper/server to unxline
         *      rehash  - allow oper/server to rehash
         *      resv    - allow oper/server to resv
         *      unresv  - allow oper/server to unresv
         *      locops  - allow oper/server to locops - only used for servers that cluster
         *      all     - allow oper/server to do all of the above (default)
         */
        type = kline, unkline, resv;
};

/*
 * kill {}:  users that are not allowed to connect
 * Oper issued klines will be added to the specified kline database
 */
kill {
        user = "bad@*.example.net";
        reason = "Obviously hacked account";
};

/*
 * deny {}:  IP addresses that are not allowed to connect
 * (before DNS/ident lookup)
 * Oper issued dlines will be added to the specified dline database
 */
deny {
        ip = "192.0.2.0/28";
        reason = "Reconnecting vhosted bots";
};

/*
 * exempt {}:  IP addresses that are exempt from deny {} and Dlines
 */
exempt {
        ip = "192.0.2.240/28";

        /* The 'ip' directives can be stacked */
        ip = "10.0.0.0/8";
        ip = "fc00::/7";
};

/*
 * resv {}:  nicks and channels users may not use/join
 */
resv { mask = "clone*"; reason = "Clone bots"; };
resv { mask = "Global"; reason = "Reserved for services"; };
resv { mask = "ChanServ"; reason = "Reserved for services"; };
resv { mask = "NickServ"; reason = "Reserved for services"; };
resv { mask = "OperServ"; reason = "Reserved for services"; };
resv { mask = "MemoServ"; reason = "Reserved for services"; };
resv { mask = "BotServ"; reason = "Reserved for services"; };
resv { mask = "HelpServ"; reason = "Reserved for services"; };
resv { mask = "HostServ"; reason = "Reserved for services"; };
resv { mask = "StatServ"; reason = "Reserved for services"; };
resv { mask = "#*services*"; reason = "Reserved for services"; };

resv {
        /*
         * mask: masks starting with a '#' are automatically considered
         * as channel name masks.
         */
        mask = "#helsinki";
        reason = "Channel is reserved for Finnish inhabitants";

        /*
         * exempt: can be either a ISO 3166 alpha-2 two letter country
         * code, or a nick!user@host mask. CIDR is supported. Exempt
         * entries can be stacked.
         */
        exempt = "FI";
};

/*
 * gecos {}:  used for banning users based on their "realname".
 */
gecos {
        name = "*sex*";
        reason = "Possible spambot";
};

gecos {
        name = "sub7server";
        reason = "Trojan drone";
};

/*
 * service {}: specifies a server which may act as a network service
 *
 * NOTE: it is very important that every server on the network
 *       has the same service {} block.
 */
service {
        /* name: the actual name of the service. Wildcards are not allowed. */
        name = "service.example.net";

        /* The 'name' directives can be stacked. */
        name = "stats.example.net";
};

/*
 * pseudo {}: adds pseudo/custom commands also known as service aliases
 */
pseudo {
        /* command: the actual command/alias. */
        command = "IDENTIFY";

        /* prepend: optional text that can be prepended to the user's message. */
        prepend = "IDENTIFY ";

        /* name: the service name, used for error messages. */
        name = "NickServ";

        /* target: the actual target where this message should be sent to. */
        target = "NickServ@service.example.net";
};

pseudo {
        command = "CHANSERV";
        name = "ChanServ";
        target = "ChanServ@service.example.net";
};

pseudo {
        command = "CS";
        name = "ChanServ";
        target = "ChanServ@service.example.net";
};

pseudo {
        command = "NICKSERV";
        name = "NickServ";
        target = "NickServ@service.example.net";
};

pseudo {
        command = "NS";
        name = "NickServ";
        target = "NickServ@service.example.net";
};

pseudo {
        command = "MEMOSERV";
        name = "MemoServ";
        target = "MemoServ@service.example.net";
};

pseudo {
        command = "MS";
        name = "MemoServ";
        target = "MemoServ@service.example.net";
};

pseudo {
        command = "OPERSERV";
        name = "OperServ";
        target = "OperServ@service.example.net";
};

pseudo {
        command = "OS";
        name = "OperServ";
        target = "OperServ@service.example.net";
};

pseudo {
        command = "HOSTSERV";
        name = "HostServ";
        target = "HostServ@service.example.net";
};

pseudo {
        command = "HS";
        name = "HostServ";
        target = "HostServ@service.example.net";
};

pseudo {
        command = "BOTSERV";
        name = "BotServ";
        target = "BotServ@service.example.net";
};

pseudo {
        command = "BS";
        name = "BotServ";
        target = "BotServ@service.example.net";
};

/*
 * channel {}:  the channel block contains options pertaining to channels
 */
channel {
        /*
         * disable_fake_channels: this option, if set to 'yes', will
         * disallow clients from creating or joining channels that have one
         * of the following ASCII characters in their name:
         *
         *   2 | bold
         *   3 | mirc color
         *  15 | plain text
         *  22 | reverse
         *  29 | italic
         *  31 | underline
         * 160 | non-breaking space
         */
        disable_fake_channels = yes;

        /*
         * invite_client_count, invite_client_time: how many INVITE commands
         * are permitted per client per invite_client_time.
         */
        invite_client_count = 10;
        invite_client_time = 5 minutes;

        /*
         * invite_delay_channel: how often an INVITE to any specific channel
         * is permitted, regardless of the user sending the INVITE.
         */
        invite_delay_channel = 5 seconds;

        /*
         * knock_client_count, knock_client_time: how many KNOCK commands
         * are permitted per client per knock_client_time.
         */
        knock_client_count = 1;
        knock_client_time = 5 minutes;

        /*
         * knock_delay_channel: how often a KNOCK to any specific channel
         * is permitted, regardless of the user sending the KNOCK.
         */
        knock_delay_channel = 1 minute;

        /*
         * max_channels: the maximum number of channels a user can join/be on.
         * This is a default value which can be overriden with class {} blocks.
         */
        max_channels = 25;

        /* max_bans: maximum number of +b/e/I modes in a channel. */
        max_bans = 100;

        /*
         * default_join_flood_count, default_join_flood_time:
         * how many joins in how many seconds constitute a flood. Use 0 to disable.
         * +b opers will be notified. These are only default values which can be
         * changed via "/QUOTE SET JFLOODCOUNT" and "/QUOTE SET JFLOODTIME".
         */
        default_join_flood_count = 18;
        default_join_flood_time = 6 seconds;
};

/*
 * serverhide {}:  the serverhide block contains the options regarding
 * to server hiding. For more information regarding server hiding,
 * please see doc/serverhide.txt
 */
serverhide {
        /*
         * disable_remote_commands: disable users issuing commands
         * on remote servers.
         */
        disable_remote_commands = no;

        /*
         * flatten_links: this option will show all servers in /links appear
         * as though they are linked to this current server.
         */
        flatten_links = no;

        /*
         * flatten_links_delay: how often to update the links file when it is
         * flattened.
         */
        flatten_links_delay = 5 minutes;

        /*
         * flatten_links_file: path to the flatten links cache file.
         */
        flatten_links_file = "var/lib/links.txt";

        /*
         * hidden: hide this server from a /links output on servers that
         * support it. This allows hub servers to be hidden etc.
         */
        hidden = no;

        /*
         * hide_servers: hide remote servernames everywhere and instead use
         * hidden_name and network_desc.
         */
        hide_servers = no;

        /*
         * hide_services: define this if you want to hide the location of
         * services servers that are specified in the service {} block.
         */
        hide_services = no;

        /*
         * hidden_name: use this as the servername users see if hide_servers = yes.
         */
        hidden_name = "*.example.net";

        /*
         * hide_server_ips: if this is disabled, opers will be unable to see
         * servers' IP addresses and will be shown a masked IP address; admins
         * will be shown the real IP address.
         *
         * If this is enabled, nobody can see a server's IP address.
         * *This is a kludge*: it has the side effect of hiding the IP addresses
         * everywhere, including logfiles.
         *
         * We recommend you leave this disabled, and just take care with who you
         * give administrator privileges to.
         */
        hide_server_ips = no;
};

/*
 * general {}:  the general block contains many of the options that were once
 * compiled in options in config.h
 */
general {
        /*
         * cycle_on_host_change: sends a fake QUIT/JOIN combination
         * when services change the hostname of a specific client.
         */
        cycle_on_host_change = yes;

        /* max_watch: maximum WATCH entries a client can have. */
        max_watch = 50;

        /* max_accept: maximum allowed /accept's for +g user mode. */
        max_accept = 50;

        /* whowas_history_length: maximum length of the WHOWAS nick name history. */
        whowas_history_length = 15000;

        /*
         * dline_min_cidr: the minimum required length of a CIDR bitmask
         * for IPv4 based D-lines.
         */
        dline_min_cidr = 16;

        /*
         * dline_min_cidr6: the minimum required length of a CIDR bitmask
         * for IPv6 based D-lines.
         */
        dline_min_cidr6 = 48;

        /*
         * kline_min_cidr: the minimum required length of a CIDR bitmask
         * for IPv4 based K-lines.
         */
        kline_min_cidr = 16;

        /*
         * kline_min_cidr6: the minimum required length of a CIDR bitmask
         * for IPv6 based K-lines.
         */
        kline_min_cidr6 = 48;

        /*
         * invisible_on_connect: whether to automatically set user mode +i
         * on connecting users.
         */
        invisible_on_connect = yes;

        /*
         * kill_chase_time_limit: KILL chasing is a feature whereby a KILL
         * issued for a user who has recently changed nickname will be applied
         * automatically to the new nick. kill_chase_time_limit is the maximum
         * time following a nickname change that this chasing will apply.
         */
        kill_chase_time_limit = 30 seconds;

        /*
         * ignore_bogus_ts: ignore bogus timestamps from other servers.
         * Yes, this will desync the network, but it will allow chanops
         * to resync with a valid non TS 0.
         *
         * This should be enabled network wide, or not at all.
         */
        ignore_bogus_ts = no;

        /*
         * disable_auth: completely disable ident lookups; if you enable this,
         * be careful of what you set need_ident to in your auth {} blocks.
         */
        disable_auth = no;

        /*
         * tkline_expire_notices: enables or disables temporary kline/xline
         * expire notices.
         */
        tkline_expire_notices = no;

        /*
         * default_floodcount: the default value of floodcount that is configurable
         * via /quote set floodcount. This is the number of lines a user may send
         * to any other user/channel in one second. Set to 0 to disable.
         */
        default_floodcount = 10;

        /*
         * failed_oper_notice: send a notice to all opers on the server when
         * someone tries to OPER and uses the wrong password, host or ident.
         */
        failed_oper_notice = yes;

        /*
         * dots_in_ident: the number of '.' characters permitted in an ident
         * reply before the user is rejected.
         */
        dots_in_ident = 2;

        /*
         * min_nonwildcard: the minimum number of non-wildcard characters in
         * k/d lines placed via the server. K-lines hand-placed are exempt from
         * this limit.
         * Wildcard characters: '.', ':', '*', '?'
         */
        min_nonwildcard = 4;

        /*
         * min_nonwildcard_simple: the minimum number of non-wildcard characters
         * in gecos bans. Wildcard characters: '*', '?'
         */
        min_nonwildcard_simple = 3;

        /* anti_nick_flood: enable the nickflood control code. */
        anti_nick_flood = yes;

        /*
         * max_nick_changes, max_nick_time: the number of nick changes allowed in
         * the specified period.
         */
        max_nick_changes = 5;
        max_nick_time = 20 seconds;

        /*
         * away_count, away_time: how many AWAY commands are permitted per
         * client per away_time.
         */
        away_count = 2;
        away_time = 10 seconds;

        /*
         * anti_spam_exit_message_time: the minimum time a user must be connected
         * before custom quit messages are allowed.
         */
        anti_spam_exit_message_time = 5 minutes;

        /*
         * ts_warn_delta, ts_max_delta: the time delta allowed between server
         * clocks before a warning is given, or before the link is dropped.
         * All servers should run ntpdate/rdate to keep clocks in sync.
         */
        ts_warn_delta = 3 seconds;
        ts_max_delta = 15 seconds;

        /*
         * warn_no_connect_block: warn opers about servers that try to connect
         * but for which we don't have a connect {} block. Twits with
         * misconfigured servers can become really annoying with this enabled.
         */
        warn_no_connect_block = yes;

        /*
         * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
         * operators and administrators. Doing so is a good idea in case
         * there are any exempted (exempt {}) server IP addresses you don't
         * want to see leaked.
         */
        stats_e_disabled = no;

        /* stats_m_oper_only: make /stats m/M (messages) oper only. */
        stats_m_oper_only = yes;

        /* stats_o_oper_only: make stats o (opers) oper only. */
        stats_o_oper_only = yes;

        /* stats_P_oper_only: make stats P (ports) oper only. */
        stats_P_oper_only = yes;

        /* stats_u_oper_only: make stats u (uptime) oper only. */
        stats_u_oper_only = no;

        /*
         * stats_i_oper_only: make stats i (auth {}) oper only. Set to:
         *     yes    - show users no auth {} blocks, made oper only
         *     masked - show users the first matching auth {} block
         *     no     - show users all auth {} blocks
         */
        stats_i_oper_only = yes;

        /*
         * stats_k_oper_only: make stats k/K (klines) oper only. Set to:
         *     yes    - show users no klines, made oper only
         *     masked - show users the first matching kline
         *     no     - show users all klines
         */
        stats_k_oper_only = yes;

        /*
         * caller_id_wait: time between notifying a +g user that somebody
         * is messaging them.
         */
        caller_id_wait = 1 minute;

        /*
         * opers_bypass_callerid: allows operators to bypass +g and message
         * anyone who has it set.
         */
        opers_bypass_callerid = no;

        /*
         * pace_wait_simple: minimum time required between use of less
         * intensive commands
         * (ADMIN, HELP, LUSERS, VERSION, remote WHOIS)
         */
        pace_wait_simple = 1 second;

        /*
         * pace_wait: minimum time required between use of more intensive commands
         * (INFO, LINKS, MAP, MOTD, STATS, WHO, WHOWAS)
         */
        pace_wait = 10 seconds;

        /*
         * short_motd: send clients a notice telling them to read the MOTD
         * instead of forcing an MOTD to clients who may simply ignore it.
         */
        short_motd = no;

        /*
         * ping_cookie: require clients to respond exactly to a PING command,
         * can help block certain types of drones and FTP PASV mode spoofing.
         */
        ping_cookie = no;

        /* no_oper_flood: increase flood limits for opers. */
        no_oper_flood = yes;

        /*
         * max_targets: the maximum number of targets in a single
         * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
         */
        max_targets = 4;

        /*
         * user modes configurable: a list of user modes for the options below
         *
         * +b - bots         - See bot and drone flooding notices
         * +c - cconn        - Client connection/quit notices
         * +D - deaf         - Don't receive channel messages
         * +d - debug        - See debugging notices
         * +e - external     - See remote server connection and split notices
         * +F - farconnect   - Remote client connection/quit notices
         * +f - full         - See auth {} block full notices
         * +G - softcallerid - Server Side Ignore for users not on your channels
         * +g - callerid     - Server Side Ignore (for privmsgs etc)
         * +H - hidden       - Hides IRC operator status to other users
         * +i - invisible    - Not shown in NAMES or WHO unless you share a channel
         * +j - rej          - See rejected client notices
         * +k - skill        - See server generated KILL messages
         * +l - locops       - See LOCOPS messages
         * +n - nchange      - See client nick changes
         * +p - hidechans    - Hides channel list in WHOIS
         * +q - hideidle     - Hides idle and signon time in WHOIS
         * +R - nononreg     - Only receive private messages from registered clients
         * +s - servnotice   - See general server notices
         * +u - unauth       - See unauthorized client notices
         * +w - wallop       - See server generated WALLOPS
         * +y - spy          - See LINKS, STATS, TRACE notices etc.
         */

        /* oper_only_umodes: user modes only operators may set. */
        oper_only_umodes = bots, cconn, debug, external, farconnect, full, hidden,
                        locops, nchange, rej, skill, spy, unauth;

        /* oper_umodes: default user modes operators get when they successfully OPER. */
        oper_umodes = bots, locops, servnotice, wallop;

        /*
         * throttle_count: the maximum number of connections from the same
         * IP address allowed in throttle_time duration.
         */
        throttle_count = 1;

        /*
         * throttle_time: the minimum amount of time required between
         * connections from the same IP address. exempt {} blocks are
         * excluded from this throttling.
         * Offers protection against flooders who reconnect quickly.
         * Set to 0 to disable.
         */
        throttle_time = 2 seconds;
};

modules {
        /*
         * path: other paths to search for modules specified below
         * and in "/module load".
         */
        path = "lib/ircd-hybrid/modules";
#       path = "lib/ircd-hybrid/modules/extra";
        path = "lib/ircd-hybrid/modules/autoload";

        /* module: the name of a module to load on startup/rehash. */
#       module = "some_module.la";
};

/*
 * log {}:  contains information about logfiles.
 */
log {
        /* Do you want to enable logging to ircd.log? */
        use_logging = yes;

        file {
                type = oper;
                name = "var/log/oper.log";
                size = unlimited;
        };

        file {
                type = user;
                name = "var/log/user.log";
                size = 50 megabytes;
        };

        file {
                type = kill;
                name = "var/log/kill.log";
                size = 50 megabytes;
        };

        file {
                type = kline;
                name = "var/log/kline.log";
                size = 50 megabytes;
        };

        file {
                type = dline;
                name = "var/log/dline.log";
                size = 50 megabytes;
        };

        file {
                type = xline;
                name = "var/log/xline.log";
                size = 50 megabytes;
        };

        file {
                type = resv;
                name = "var/log/resv.log";
                size = 50 megabytes;
        };

        file {
                type = debug;
                name = "var/log/debug.log";
                size = 50 megabytes;
        };
};
Revision:	7668
Committed:	Wed Jul 20 17:09:49 2016 UTC (10 years ago) by michael
File size:	40953 byte(s)
Log Message:	- Fixed svn properties