trunk/doc/reference.conf

/* ircd-hybrid reference configuration file
 * Copyright (C) 2000-2013 Hybrid Development Team
 *
 * Written by ejb, wcampbel, db, leeh and others
 *
 * $Id$
 */

/*
 * ########################################################################
 * IMPORTANT NOTE:
 *
 * auth {} blocks MUST be specified in order of precedence.  The first one
 * that matches a user will be used.  So place spoofs first, then specials,
 * then general access.
 * ########################################################################
 *
 * Shell style (#), C++ style (//) and C style comments are supported.
 *
 * Files may be included by either:
 *        .include "filename"
 *        .include <filename>
 *
 * Times/durations are written as:
 *        12 hours 30 minutes 1 second
 *        
 * Valid units of time:
 *        year, month, week, day, hour, minute, second
 *
 * Valid units of size:
 *        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
 *
 * Sizes and times may be singular or plural.
 */


/*
 * serverinfo {}:  contains information about the server
 */
serverinfo {
        /*
         * name: the name of this server. This cannot be changed at runtime.
         */
        name = "hades.arpa";

        /*
         * sid: a server's unique ID. This is three characters long and must
         * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
         * a digit, followed by 2 alpha-numerical letters.
         *
         * NOTE: The letters must be capitalized. This cannot be changed at runtime.
         */
        sid = "0HY";

        /*
         * description: the description of the server.
         */
        description = "ircd-hybrid test server";

        /*
         * network info: the name and description of the network this server
         * is on. Shown in the 005 reply and used with serverhiding.
         */
        network_name = "MyNet";
        network_desc = "This is My Network";

        /*
         * hub: allow this server to act as a hub and have multiple servers
         * connected to it.
         */
        hub = no;

        /*
         * vhost: the IP to bind to when we connect outward to ipv4 servers.
         * This should be an ipv4 IP only, or "*" for INADDR_ANY.
         */
#       vhost = "192.169.0.1";

        /*
         * vhost6: the address to bind to when we make outgoing connections
         * to IPv6 servers. This should be an IPv6 address, or "*" for INADDR_ANY.
         */
#       vhost6 = "3ffe:80e8:546::2";

        /* max_clients: the maximum number of clients allowed to connect. */
        max_clients = 512;

        /*
         * max_nick_length: only applies to local clients. Must be in the
         * range of 9 to 30. Default is 9 if nothing else is specified.
         */
        max_nick_length = 9;

        /*
         * max_topic_length: only applies to topics set by local clients.
         * Must be in the range of 80 to 300. Default is 80 if nothing
         * else is specified.
         */
        max_topic_length = 160;

        /*
         * rsa_private_key_file: the path to the file containing the
         * RSA key for cryptlink.
         *
         * Example commands to store a 2048 bit RSA keypair in
         * rsa.key, and the public key in rsa.pub:
         *
         *      openssl genrsa -out rsa.key 2048
         *      chown <ircd-user>.<ircd.group> rsa.key
         *      chmod 0600 rsa.key
         */
#       rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";

        /*
         * ssl_certificate_file: the path to the file containing our
         * SSL certificate for encrypted client connection.
         *
         * This assumes your private RSA key is stored in rsa.key. You
         * MUST have an RSA key in order to generate the certificate.
         *
         * Example command:
         *
         *      openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
         *
         * See http://www.openssl.org/docs/HOWTO/certificates.txt
         *
         * Please use the following values when generating the cert
         *
         *      Organization Name: Network Name
         *      Organization Unit Name: changme.someirc.net
         *      Common Name: irc.someirc.net
         *      E-mail: you@domain.com
         */
#       ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";

        /*
         * ssl_dh_param_file:
         *
         * Path to the PEM encoded Diffie-Hellman parameter file.
         * DH parameters are required when using ciphers with EDH
         * (ephemeral Diffie-Hellman) key exchange.
         *
         * A DH parameter file can be created by running:
         *
         *      openssl dhparam -out dhparam.pem 1024
         *
         * Prime size must be at least 1024 bits. Further information
         * regarding specific OpenSSL dhparam command-line options
         * can be found in the OpenSSL manual.
         */
#       ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";

        /*
         * ssl_cipher_list:
         *
         * List of ciphers to support on _this_ server. Can be used to
         * enforce specific ciphers for incoming SSL/TLS connections.
         * If a client (which also includes incoming server connections) is not
         * capable of using any of the ciphers listed here, the connection will
         * simply be rejected.
         *
         * A list of supported ciphers by OpenSSL can be obtained by running:
         *
         *      openssl ciphers -ssl3 -tls1 -v
         *
         * Multiple ciphers are separated by colons. The order of preference is
         * from left to right.
         */
#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";

        /*
         * ssl_server_method:
         * ssl_client_method:
         *
         * SSL/TLS methods we provide for incoming (server method) and
         * outgoing (client method) SSL/TLS connections.
         * This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
         */
#       ssl_server_method = tlsv1, sslv3;
#       ssl_client_method = tlsv1;
};

/*
 * admin {}:  contains admin information about the server
 */
admin {
        name = "Smurf target";
        description = "Main Server Administrator";
        email = "<syn@packets.r.us>";
};

/*
 * class {}:  contains information about classes for users
 */
class {
        /* name: the name of the class. */
        name = "users";

        /*
         * ping_time: how often a client must reply to a PING from the
         * server before they are dropped.
         */
        ping_time = 90 seconds;

        /*
         * number_per_ip: how many local users are allowed to connect
         * from a single IP address  (optional)
         */
        number_per_ip = 2;

        /*
         * max_local: how many local users are allowed to connect
         * from a single ident@host  (optional)
         */
        max_local = 2;

        /*
         * max_global: network-wide limit of users per ident@host  (optional)
         */
        max_global = 10;

        /*
         * max_number: the maximum number of users allowed in this class (optional)
         */
        max_number = 100;

        /*
         * the following lines are optional and allow you to define
         * how many users can connect from one /NN subnet.
         */
        cidr_bitlen_ipv4 = 24;
        cidr_bitlen_ipv6 = 120;
        number_per_cidr = 16;

        /*
         * sendq: the amount of data allowed in a client's send queue before
         * they are dropped.
         */
        sendq = 100 kbytes;

        /*
         * recvq: the amount of data allowed in a client's receive queue before
         * they are dropped for flooding. Defaults to 2560 if the chosen
         * value isn't within the range of 512 to 8000.
         */
        recvq = 2560 bytes;
};

class {
        name = "opers";
        ping_time = 90 seconds;
        number_per_ip = 10;
        max_number = 100;
        sendq = 100 kbytes;

        /*
         * min_idle: minimum idle time that is shown in /whois.
         */
        min_idle = 3 hours;

        /*
         * max_idle: maximum idle time that is shown in /whois.
         */
        max_idle = 8 hours;

        /*
         * flags:
         *
         * random_idle          - a fake idle time is set randomly between
         *                        min_idle and max_idle
         * hide_idle_from_opers - the fake idle time will also be shown to operators
         */
        flags = random_idle, hide_idle_from_opers;
};

class {
        name = "server";
        ping_time = 90 seconds;

        /*
         * connectfreq: only used in server classes. Specifies the delay
         * between autoconnecting to servers.
         */
        connectfreq = 5 minutes;

        /* max number: the number of servers to autoconnect to. */
        max_number = 1;

        /* sendq: servers need a higher sendq as they send more data. */
        sendq = 2 megabytes;
};

/*
 * motd {}: Allows the display of a different MOTD to a client
 * depending on its origin. Applies to local users only.
 */
motd {
        /*
         * mask: multiple mask entries are permitted. Mask can either be
         * a class name or a hostname.
         */
        mask = "*.at";
        mask = "*.de";
        mask = "*.ch";

        /*
         * file: path to the actual motd file.
         */
        file = "/usr/local/ircd/etc/german.motd";
};

/*
 * listen {}:  contains information about the ports ircd listens on
 */
listen {
        /*
         * port: the port to listen on. If no host is specified
         * earlier in the listen {} block, it will listen on all available IPs.
         *
         * Ports are separated by commas; a range may be specified using ".."
         */

        /* port: listen on all available IP addresses, ports 6665 to 6669 */
        port = 6665 .. 6669;

        /*
         * Listen on 192.168.0.1/6697 with SSL enabled and hidden from STATS P
         * unless you are an administrator.
         *
         * NOTE: The "flags" directive always has to come before "port".
         *
         * Currently available flags are:
         *
         *  ssl    - Port may only accept TLS/SSL connections
         *  server - Only server connections are permitted
         *  hidden - Port is hidden from /stats P, unless you're an admin
         */
        flags = hidden, ssl;
        host = "192.168.0.1";
        port = 6697;

        /*
         * host: set a specific IP address/host to listen on using the
         * subsequent port definitions. This may be IPv4 or IPv6.
         */
        host = "1.2.3.4";
        port = 7000, 7001;

        host = "3ffe:1234:a:b:c::d";
        port = 7002;
};

/*
 * auth {}:  allow users to connect to the ircd
 */
auth {
        /*
         * user: the user@host allowed to connect. Multiple user
         * lines are permitted within each auth block.
         */
        user = "*@172.16.0.0/12";
        user = "*test@123D:B567:*";

        /* password: an optional password that is required to use this block */
        password = "letmein";

        /*
         * encrypted: controls whether the auth password above has been
         * encrypted.
         */
        encrypted = yes;

        /*
         * spoof: fake the user's host to this. This is free-form, just do
         * everyone a favor and don't abuse it. ('=' prefix on /stats I)
         */
        spoof = "I.still.hate.packets";

        /* class: the class the user is placed in */
        class = "opers";

        /*
         * need_password - don't allow users who haven't supplied the correct
         *                 password to connect using another auth{} block
         *                 ('&' prefix on /stats I if disabled)
         * need_ident    - require the user to have identd to connect ('+' prefix on /stats I)
         * spoof_notice  - enable spoofing notification to admins
         * exceed_limit  - allow a user to exceed class limits ('>' prefix on /stats I)
         * kline_exempt  - exempt this user from k/glines ('^' prefix on /stats I)
         * gline_exempt  - exempt this user from glines ('_' prefix on /stats I)
         * resv_exempt   - exempt this user from resvs ('$' prefix on /stats I)
         * no_tilde      - remove ~ from a user with no ident ('-' prefix on /stats I)
         * can_flood     - allow this user to exceed flood limits ('|' prefix on /stats I)
         * webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
         *                 ('<' prefix on /stats I)
         */
        flags = need_password, spoof_notice, exceed_limit, kline_exempt,
                gline_exempt, resv_exempt, no_tilde, can_flood;
};

auth {
        /*
         * redirect: the server and port to redirect a user to. A user does not
         * have to obey the redirection; the ircd just suggests an alternative
         * server for them.
         */
        redirserv = "this.is.not.a.real.server";
        redirport = 6667;

        user = "*.server";

        /* class: a class is required even though it is not used */
        class = "users";
};

auth {
        user = "*@*";
        class = "users";
        flags = need_ident;
};

/*
 * operator {}:  defines ircd operators
 */
operator {
        /* name: the name of the oper */
        name = "sheep";

        /*
         * user: the user@host required for this operator. Multiple
         * user="" lines are supported.
         */
        user = "*sheep@192.168.0.0/16";
        user = "*@127.0.0.0/8";

        /*
         * password: the password required to oper. By default this will
         * need to be encrypted by using the provided mkpasswd tool.
         * Several password hash algorithms are available depending
         * on your system's crypt() implementation. For example, a modern
         * glibc already has support for the SHA-256/512 and MD5 encryption
         * algorithms.
         */
        password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";

        /*
         * encrypted: controls whether the oper password above has been
         * encrypted.
         */
        encrypted = yes;

        /*
         * rsa_public_key_file: the public key for this oper when using Challenge.
         * A password should not be defined when this is used; see 
         * doc/challenge.txt for more information.
         */
#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";

        /*
         * ssl_certificate_fingerprint: enhances security by additionally checking
         * the oper's client certificate fingerprint against the specified
         * fingerprint below.
         *
         * Hint: your users can use the following command to obtain a SHA-256 hash
         * of their ssl certificate:
         *
         *      openssl x509 -sha256 -noout -fingerprint -in cert.pem | sed -e 's/^.*=//;s/://g'
         */
#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";

        /*
         * ssl_connection_required: client must be connected over SSL/TLS
         * in order to be able to use this oper{} block.
         * Default is 'no' if nothing else is specified.
         */
        ssl_connection_required = no;

        /* class: the class the oper joins when they successfully /oper */
        class = "opers";

        /*
         * umodes: the default usermodes opers get when they /oper. If defined,
         * it will override oper_umodes settings in general {}.
         * Available usermodes:
         *
         * +b - bots         - See bot and drone flooding notices
         * +c - cconn        - Client connection/quit notices
         * +D - deaf         - Don't receive channel messages
         * +d - debug        - See debugging notices
         * +e - external     - See remote server connection and split notices
         * +F - farconnect   - Remote client connection/quit notices
         * +f - full         - See auth{} block full notices
         * +G - softcallerid - Server Side Ignore for users not on your channels
         * +g - callerid     - Server Side Ignore (for privmsgs etc)
         * +H - hidden       - Hides operator status to other users
         * +i - invisible    - Not shown in NAMES or WHO unless you share a channel
         * +j - rej          - See rejected client notices
         * +k - skill        - See server generated KILL messages
         * +l - locops       - See LOCOPS messages
         * +n - nchange      - See client nick changes
         * +R - nononreg     - Only receive private messages from registered clients
         * +s - servnotice   - See general server notices
         * +u - unauth       - See unauthorized client notices
         * +w - wallop       - See server generated WALLOPS
         * +y - spy          - See LINKS, STATS, TRACE notices etc.
         * +z - operwall     - See oper generated WALLOPS
         */
        umodes = locops, servnotice, operwall, wallop;

        /*
         * privileges: controls the activities and commands an oper is
         * allowed to do on the server. All options default to no.
         * Available options:
         *
         * module         - allows MODULE
         * connect        - allows local CONNECT              | ('P' flag)
         * connect:remote - allows remote CONNECT             | ('Q' flag)
         * squit          - allows local SQUIT                | ('R' flag)
         * squit:remote   - allows remote SQUIT               | ('S' flag)
         * kill           - allows to KILL local clients      | ('N' flag)
         * kill:remote    - allows remote users to be /KILL'd | ('O' flag)
         * remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
         * dline          - allows DLINE                      |
         * undline        - allows UNDLINE                    |
         * kline          - allows KLINE                      | ('K' flag)
         * unkline        - allows UNKLINE                    | ('U' flag)
         * gline          - allows GLINE                      | ('G' flag)
         * xline          - allows XLINE                      | ('X' flag)
         * locops         - allows LOCOPS                     |
         * globops        - allows GLOBOPS                    |
         * wallops        - allows WALLOPS                    |
         * operwall       - allows OPERWALL                   | ('L' flag)
         * rehash         - allows oper to REHASH config      | ('H' flag)
         * die            - allows DIE                        | ('D' flag)
         * restart        - allows RESTART                    |
         * set            - allows SET                        |
         * admin          - gives administrator privileges    | ('A' flag)
         */
        flags = kill, kill:remote, connect, connect:remote, kline, unkline,
                xline, globops, restart, die, rehash, admin, operwall, module;
};

/*
 * service {}: specifies a server which may act as a network service
 *
 * NOTE: it is very important that every server on the network
 *       has the same service{} block.
 */
service {
        name = "service.someserver";
        name = "stats.someserver";
};

/*
 * connect {}: define a server to connect to
 */
connect {
        /* name: the name of the server */
        name = "irc.uplink.com";

        /*
         * host: the host or IP address to connect to. If a hostname is used it
         * must match the reverse DNS of the server.
         */
        host = "192.168.0.1";

        /*
         * vhost: the IP address to bind to when making outgoing connections to
         * servers.
         * serverinfo::vhost and serverinfo::vhost6 will be overridden
         * by this directive.
         */
        vhost = "192.168.0.2";

        /*
         * passwords: the passwords to send (OLD C:) and accept (OLD N:).
         * The remote server will have these passwords swapped.
         */
        send_password = "password";
        accept_password = "anotherpassword";

        /*
         * encrypted: controls whether the accept_password above has been
         * encrypted.
         */
        encrypted = no;

        /* port: the port to connect to this server on */
        port = 6666;

        /*
         * hub_mask: the mask of servers that this server may hub. Multiple
         * entries are permitted.
         */
        hub_mask = "*";

        /*
         * leaf_mask: the mask of servers this server may not hub. Multiple
         * entries are permitted. Useful for forbidding EU -> US -> EU routes.
         */
#       leaf_mask = "*.uk";

        /* class: the class this server is in */
        class = "server";

        /*
         * ssl_cipher_list:
         *
         * List of ciphers that the server we are connecting to must support.
         * If the server is not capable of using any of the ciphers listed below,
         * the connection will simply be rejected.
         * Can be used to enforce stronger ciphers, even though this option
         * is not necessarily required to establish a SSL/TLS connection.
         *
         * Multiple ciphers are separated by colons. The order of preference
         * is from left to right.
         */
#       ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";

        /*
         * ssl_certificate_fingerprint: enhances security by additionally checking
         * the server's client certificate fingerprint against the specified
         * fingerprint below.
         */
#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";

        /*
         * autoconn   - controls whether we autoconnect to this server or not,
         *              dependent on class limits. By default, this is disabled.
         * ssl        - Initiates a TLS/SSL connection.
         */
#       flags = autoconn, ssl;
};

connect {
        name = "ipv6.some.server";
        host = "3ffd:dead:beef::1";
        send_password = "password";
        accept_password = "password";
        port = 6666;

        /*
         * aftype: controls whether the connection uses "ipv4" or "ipv6".
         * Default is ipv4.
         */
        aftype = ipv6;
        class = "server";
};

/*
 * cluster {}:  servers that share klines/unkline/xline/unxline/resv/unresv/locops
 * automatically
 */
cluster {
        /*
         * name: the server to share with; this can take wildcards
         *
         * NOTE: only local actions will be clustered, meaning that if
         *       the server receives a shared kline/unkline/etc, it
         *       will not be propagated to clustered servers.
         *
         *       Remote servers are not necessarily required to accept
         *       clustered lines, they need a shared{} for *THIS* server
         *       in order to accept them.
         */
        name = "*.arpa";

        /*
         * type: list of what to share; options are as follows:
         *      dline   - share dlines
         *      undline - share undlines
         *      kline   - share klines
         *      unkline - share unklines
         *      xline   - share xlines
         *      unxline - share unxlines
         *      resv    - share resvs
         *      unresv  - share unresvs
         *      locops  - share locops
         *      all     - share all of the above (default)
         */
        type = kline, unkline, locops, xline, resv;
};

/*
 * shared {}: users that are allowed to remote kline
 *
 * NOTE: This can effectively be used for remote klines.
 *       Please note that there is no password authentication
 *       for users setting remote klines. You must also be
 *       /oper'd in order to issue a remote kline.
 */
shared {
        /*
         * name: the server the user must be connected to in order to set klines.
         * If this is not specified, the user will be allowed to kline from all
         * servers.
         */
        name = "irc2.some.server";

        /*
         * user: the user@host mask that is allowed to set klines. If this is
         * not specified, all users on the server above will be allowed to set
         * a remote kline.
         */
        user = "oper@my.host.is.spoofed";

        /*
         * type: list of what to share, options are as follows:
         *      dline   - allow oper/server to dline
         *      undline - allow oper/server to undline
         *      kline   - allow oper/server to kline
         *      unkline - allow oper/server to unkline
         *      xline   - allow oper/server to xline
         *      unxline - allow oper/server to unxline
         *      resv    - allow oper/server to resv
         *      unresv  - allow oper/server to unresv
         *      locops  - allow oper/server to locops - only used for servers that cluster
         *      all     - allow oper/server to do all of the above (default)
         */
        type = kline, unkline, resv;
};

/*
 * kill {}:  users that are not allowed to connect
 * Oper issued klines will be added to the specified kline config
 */
kill {
        user = "bad@*.hacked.edu";
        reason = "Obviously hacked account";
};

/*
 * deny {}:  IP addresses that are not allowed to connect
 * (before DNS/ident lookup)
 * Oper issued dlines will be added to the specified dline config
 */
deny {
        ip = "10.0.1.0/24";
        reason = "Reconnecting vhosted bots";
};

/*
 * exempt {}:  IP addresses that are exempt from deny {} and Dlines
 */
exempt {
        ip = "192.168.0.0/16";
};

/*
 * resv {}:  nicks and channels users may not use/join
 */
resv { mask = "clone*"; reason = "Clone bots"; };
resv { mask = "ChanServ"; reason = "Reserved for services"; };
resv { mask = "NickServ"; reason = "Reserved for services"; };
resv { mask = "OperServ"; reason = "Reserved for services"; };
resv { mask = "MemoServ"; reason = "Reserved for services"; };
resv { mask = "BotServ"; reason = "Reserved for services"; };
resv { mask = "HelpServ"; reason = "Reserved for services"; };
resv { mask = "HostServ"; reason = "Reserved for services"; };
resv { mask = "StatServ"; reason = "Reserved for services"; };
resv { mask = "#*services*"; reason = "Reserved for services"; };

resv {
        /*
         * mask: masks starting with a '#' are automatically considered
         * as channel name masks.
         */
        mask = "#helsinki";
        reason = "Channel is reserved for finnish inhabitants";

        /*
         * exempt: can be either a ISO 3166 alpha-2 two letter country
         * code, or a nick!user@host mask. CIDR is supported. Exempt
         * entries can be stacked.
         */
        exempt = "FI";
};

/*
 * gecos {}:  Used for banning users based on their "realname".
 */
gecos {
        name = "*sex*";
        reason = "Possible spambot";
};

gecos {
        name = "sub7server";
        reason = "Trojan drone";
};

/*
 * channel {}:  The channel block contains options pertaining to channels
 */
channel {
        /*
         * disable_fake_channels: this option, if set to 'yes', will
         * disallow clients from creating or joining channels that have one
         * of the following ASCII characters in their name:
         *
         *   2 | bold
         *   3 | mirc color
         *  15 | plain text
         *  22 | reverse
         *  29 | italic
         *  31 | underline
         * 160 | non-breaking space
         */
        disable_fake_channels = yes;

        /*
         * knock_delay: The amount of time a user must wait between issuing
         * the knock command.
         */
        knock_delay = 5 minutes;

        /*
         * knock_delay_channel: How often a knock to any specific channel
         * is permitted, regardless of the user sending the knock.
         */
        knock_delay_channel = 1 minute;

        /*
         * max_chans_per_user: The maximum number of channels a user can
         * join/be on.
         */
        max_chans_per_user = 25;

        /*
         * max_chans_per_oper: The maximum number of channels an oper can
         * join/be on.
         */
        max_chans_per_oper = 50;

        /* max_bans: maximum number of +b/e/I modes in a channel */
        max_bans = 100;

        /*
         * how many joins in how many seconds constitute a flood. Use 0 to
         * disable. +b opers will be notified (changeable via /set)
         */
        join_flood_count = 16;
        join_flood_time = 8 seconds;

        /*
         * The ircd will now check splitmode (whether a server is split from
         * the network) every few seconds; this functionality is known as
         * splitcode and is influenced by the options below.
         *
         * Either split users or split servers can activate splitmode, but
         * both conditions must be met for the ircd to deactivate splitmode.
         *
         * You may force splitmode to be permanent by /quote set splitmode on
         */

        /*
         * default_split_user_count: when the usercount is lower than this level,
         * consider ourselves split. This must be set for automatic splitmode.
         */
        default_split_user_count = 0;

        /*
         * default_split_server_count: when the servercount is lower than this,
         * consider ourselves split. This must be set for automatic splitmode.
         */
        default_split_server_count = 0;

        /* no_create_on_split: do not allow users to create channels on split. */
        no_create_on_split = yes;

        /* no_join_on_split: do not allow users to join channels on a split. */
        no_join_on_split = no;
};

/*
 * serverhide {}:  The serverhide block contains the options regarding
 * to server hiding
 */
serverhide {
        /*
         * disable_remote_commands: disable users issuing commands
         * on remote servers.
         */
        disable_remote_commands = no;

        /*
         * flatten_links: this option will show all servers in /links appear
         * as though they are linked to this current server.
         */
        flatten_links = no;

        /*
         * links_delay: how often to update the links file when it is
         * flattened.
         */
        links_delay = 5 minutes;

        /*
         * hidden: hide this server from a /links output on servers that
         * support it. This allows hub servers to be hidden etc.
         */
        hidden = no;

        /*
         * hide_servers: hide remote servernames everywhere and instead use
         * hidden_name and network_desc.
         */
        hide_servers = no;

        /*
         * hide_services: define this if you want to hide the location of
         * services servers that are specified in the service{} block.
         */
        hide_services = no;

        /*
         * Use this as the servername users see if hide_servers = yes.
         */
        hidden_name = "*.hidden.com";

        /*
         * hide_server_ips: If this is disabled, opers will be unable to see
         * servers' IP addresses and will be shown a masked IP address; admins
         * will be shown the real IP address.
         *
         * If this is enabled, nobody can see a server's IP address.
         * *This is a kludge*: it has the side effect of hiding the IP addresses
         * everywhere, including logfiles.
         *
         * We recommend you leave this disabled, and just take care with who you
         * give administrator privileges to.
         */
        hide_server_ips = no;
};

/*
 * general {}:  The general block contains many of the options that were once
 * compiled in options in config.h
 */
general {
        /*
         * cycle_on_host_change: sends a fake QUIT/JOIN combination
         * when services change the hostname of a specific client.
         */
        cycle_on_host_change = yes;

        /* services_name: servername of nick/channel services */
        services_name = "service.someserver";

        /* max_watch: maximum WATCH entries a client can have. */
        max_watch = 60;

        /* gline_enable: enable glines (network-wide temporary klines). */
        gline_enable = yes;

        /*
         * gline_duration: the amount of time a gline will remain on your
         * server before expiring.
         */
        gline_duration = 1 day;

        /*
         * gline_request_duration: how long a pending G-line can be around.
         * 10 minutes should be plenty.
         */
        gline_request_duration = 10 minutes;

        /*
         * gline_min_cidr: the minimum required length of a CIDR bitmask
         * for IPv4 based glines.
         */
        gline_min_cidr = 16;

        /*
         * gline_min_cidr6: the minimum required length of a CIDR bitmask
         * for IPv6 based glines.
         */
        gline_min_cidr6 = 48;

        /*
         * Whether to automatically set mode +i on connecting users.
         */
        invisible_on_connect = yes;

        /*
         * kill_chase_time_limit: KILL chasing is a feature whereby a KILL
         * issued for a user who has recently changed nickname will be applied
         * automatically to the new nick. kill_chase_time_limit is the maximum
         * time following a nickname change that this chasing will apply.
         */
        kill_chase_time_limit = 90 seconds;

        /*
         * hide_spoof_ips: if disabled, opers will be allowed to see the real
         * IP address of spoofed users in /trace etc. If this is defined they
         * will be shown a masked IP.
         */
        hide_spoof_ips = yes;

        /*
         * Ignore bogus timestamps from other servers. Yes, this will desync the
         * network, but it will allow chanops to resync with a valid non TS 0
         *
         * This should be enabled network wide, or not at all.
         */
        ignore_bogus_ts = no;

        /*
         * disable_auth: completely disable ident lookups; if you enable this,
         * be careful of what you set need_ident to in your auth {} blocks
         */
        disable_auth = no;

        /*
         * tkline_expire_notices: enables or disables temporary kline/xline
         * expire notices.
         */
        tkline_expire_notices = no;

        /*
         * default_floodcount: the default value of floodcount that is configurable
         * via /quote set floodcount. This is the number of lines a user
         * may send to any other user/channel in one second.
         */
        default_floodcount = 10;

        /*
         * failed_oper_notice: send a notice to all opers on the server when
         * someone tries to OPER and uses the wrong password, host or ident.
         */
        failed_oper_notice = yes;

        /*
         * dots_in_ident: the number of '.' characters permitted in an ident
         * reply before the user is rejected.
         */
        dots_in_ident = 2;

        /*
         * min_nonwildcard: the minimum number of non-wildcard characters in
         * k/d/g lines placed via the server. K-lines hand-placed are exempt from
         * this limit.
         * Wildcard chars: '.', ':', '*', '?', '@', '!'
         */
        min_nonwildcard = 4;

        /*
         * min_nonwildcard_simple: the minimum number of non-wildcard characters
         * in gecos bans. Wildcard chars: '*', '?'
         */
        min_nonwildcard_simple = 3;

        /* max_accept: maximum allowed /accept's for +g usermode. */
        max_accept = 20;

        /* anti_nick_flood: enable the nickflood control code. */
        anti_nick_flood = yes;

        /* nick flood: the number of nick changes allowed in the specified period */
        max_nick_time = 20 seconds;
        max_nick_changes = 5;

        /*
         * anti_spam_exit_message_time: the minimum time a user must be connected
         * before custom quit messages are allowed.
         */
        anti_spam_exit_message_time = 5 minutes;

        /*
         * ts delta: the time delta allowed between server clocks before
         * a warning is given, or before the link is dropped. All servers
         * should run ntpdate/rdate to keep clocks in sync
         */
        ts_warn_delta = 30 seconds;
        ts_max_delta = 5 minutes;

        /*
         * warn_no_nline: warn opers about servers that try to connect but
         * for which we don't have a connect {} block. Twits with misconfigured
         * servers can become really annoying with this enabled.
         */
        warn_no_nline = yes;

        /*
         * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
         * operators and administrators. Doing so is a good idea in case
         * there are any exempted (exempt{}) server IPs you don't want to
         * see leaked.
         */
        stats_e_disabled = no;

        /* stats_o_oper only: make stats o (opers) oper only */
        stats_o_oper_only = yes;

        /* stats_P_oper_only: make stats P (ports) oper only */
        stats_P_oper_only = yes;

        /* stats_u_oper_only: make stats u (uptime) oper only */
        stats_u_oper_only = no;

        /*
         * stats i oper only: make stats i (auth {}) oper only. Set to:
         *     yes    - show users no auth blocks, made oper only.
         *     masked - show users the first matching auth block
         *     no     - show users all auth blocks.
         */
        stats_i_oper_only = yes;

        /*
         * stats_k_oper_only: make stats k/K (klines) oper only. Set to:
         *     yes    - show users no auth blocks, made oper only
         *     masked - show users the first matching auth block
         *     no     - show users all auth blocks.
         */
        stats_k_oper_only = yes;

        /*
         * caller_id_wait: time between notifying a +g user that somebody
         * is messaging them.
         */
        caller_id_wait = 1 minute;

        /*
         * opers_bypass_callerid: allows operators to bypass +g and message
         * anyone who has it set (useful if you use services).
         */
        opers_bypass_callerid = no;

        /*
         * pace_wait_simple: minimum time required between use of less
         * intensive commands
         * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
         */
        pace_wait_simple = 1 second;

        /*
         * pace_wait: minimum time required between use of more intensive commands
         * (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
         */
        pace_wait = 10 seconds;

        /*
         * short_motd: send clients a notice telling them to read the MOTD
         * instead of forcing an MOTD to clients who may simply ignore it.
         */
        short_motd = no;

        /*
         * ping_cookie: require clients to respond exactly to a ping command,
         * can help block certain types of drones and FTP PASV mode spoofing.
         */
        ping_cookie = no;

        /* no_oper_flood: increase flood limits for opers. */
        no_oper_flood = yes;

        /*
         * true_no_oper_flood: completely eliminate flood limits for opers
         * and for clients with can_flood = yes in their auth {} blocks.
         */
        true_no_oper_flood = yes;

        /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
        oper_pass_resv = yes;

        /* REMOVE ME. The following line checks that you have been reading. */
        havent_read_conf = 1;

        /*
         * max_targets: the maximum number of targets in a single
         * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
         */
        max_targets = 4;

        /*
         * usermodes configurable: a list of usermodes for the options below
         *
         * +b - bots         - See bot and drone flooding notices
         * +c - cconn        - Client connection/quit notices
         * +D - deaf         - Don't receive channel messages
         * +d - debug        - See debugging notices
         * +e - external     - See remote server connection and split notices
         * +F - farconnect   - Remote client connection/quit notices
         * +f - full         - See auth{} block full notices
         * +G - softcallerid - Server Side Ignore for users not on your channels
         * +g - callerid     - Server Side Ignore (for privmsgs etc)
         * +H - hidden       - Hides operator status to other users
         * +i - invisible    - Not shown in NAMES or WHO unless you share a channel
         * +j - rej          - See rejected client notices
         * +k - skill        - See server generated KILL messages
         * +l - locops       - See LOCOPS messages
         * +n - nchange      - See client nick changes
         * +R - nononreg     - Only receive private messages from registered clients
         * +s - servnotice   - See general server notices
         * +u - unauth       - See unauthorized client notices
         * +w - wallop       - See server generated WALLOPS
         * +y - spy          - See LINKS, STATS, TRACE notices etc.
         * +z - operwall     - See oper generated WALLOPS
         */

        /* oper_only_umodes: usermodes only opers may set */
        oper_only_umodes = bots, cconn, debug, full, hidden, skill,
                           nchange, rej, spy, external, operwall,
                           locops, unauth, farconnect;

        /* oper_umodes: default usermodes opers get when they /oper */
        oper_umodes = bots, locops, servnotice, operwall, wallop;

        /*
         * use_egd: if your system does not have *random devices yet you
         * want to use OpenSSL and encrypted links, enable this. Beware -
         * EGD is *very* CPU intensive when gathering data for its pool.
         */
#       use_egd = yes;

        /*
         * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
         * which automatically finds the path.
         */
#       egdpool_path = "/var/run/egd-pool";

        /*
         * throttle_time: the minimum amount of time required between
         * connections from the same IP address. exempt {} blocks are excluded
         * from this throttling.
         * Offers protection against flooders who reconnect quickly.
         * Set to 0 to disable.
         */
        throttle_time = 10;
};

modules {
        /*
         * path: other paths to search for modules specified below
         * and in "/module load".
         */
        path = "/usr/local/ircd/lib/ircd-hybrid/modules";
        path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";

        /* module: the name of a module to load on startup/rehash. */
#       module = "some_module.la";
};

/*
 * log {}:  contains information about logfiles.
 */
log {
        /* Do you want to enable logging to ircd.log? */
        use_logging = yes;

        file {
                type = oper;
                name = "/usr/local/ircd/var/log/oper.log";
                size = unlimited;
        };

        file {
                type = user;
                name = "/usr/local/ircd/var/log/user.log";
                size = 50 megabytes;
        };

        file {
                type = kill;
                name = "/usr/local/ircd/var/log/kill.log";
                size = 50 megabytes;
        };

        file {
                type = kline;
                name = "/usr/local/ircd/var/log/kline.log";
                size = 50 megabytes;
        };

        file {
                type = dline;
                name = "/usr/local/ircd/var/log/dline.log";
                size = 50 megabytes;
        };

        file {
                type = gline;
                name = "/usr/local/ircd/var/log/gline.log";
                size = 50 megabytes;
        };

        file {
                type = xline;
                name = "/usr/local/ircd/var/log/xline.log";
                size = 50 megabytes;
        };

        file {
                type = resv;
                name = "/usr/local/ircd/var/log/resv.log";
                size = 50 megabytes;
        };

        file {
                type = debug;
                name = "/usr/local/ircd/var/log/debug.log";
                size = 50 megabytes;
        };
};
Revision:	2464
Committed:	Sat Aug 17 20:43:45 2013 UTC (13 years, 1 month ago) by michael
File size:	37331 byte(s)
Log Message:	- doc/reference.conf: remove references to RSA public key