ViewVC Help
View File | Revision Log | Show Annotations | View Changeset | Root Listing
root/svn/ircd-hybrid/trunk/NEWS
(Generate patch)

Comparing:
ircd-hybrid-7.2/RELNOTES (file contents), Revision 867 by michael, Thu May 17 14:59:27 2007 UTC vs.
ircd-hybrid/trunk/NEWS (file contents), Revision 9096 by michael, Wed Dec 25 15:53:01 2019 UTC

# Line 1 | Line 1
1 < -- ircd-hybrid-7.2.4 RELNOTES
2 < o) Fixed occasional core when placing RESVs on channel names
3 <
4 <
5 < -- ircd-hybrid-7.2.3 RELNOTES
6 < o) Added ircd-italian.lang language file
7 < o) Added -full to etrace
8 < o) Added +C for opers
9 < o) Fixed core in temp channel resv
10 < o) Fixed CHALLENGE to work with user=IP
11 < o) Misc fixes to TESTMASK and TESTLINE
12 < o) Added support for nick masks to TESTMASK
13 < o) Fixed /modlist to show up whether or not a module is resident
14 < o) Fixed command line arguments handling to allow more than one switch
15 < o) Fixed numeric delivery for mixed TS5 target on the other side of a TS6 server.
16 <
17 <
18 < -- ircd-hybrid-7.2.2 RELNOTES
19 < o) Added channel::disable_fake_channels config directive
20 < o) Fixed broken FORCEJOIN  (contrib)
21 < o) Added missing documentation for connect::vhost
22 < o) Fixed problem with G-Line voting
23 < o) Fixed "STATS ?" so it doesn't report negative traffic statistics
24 < o) Fixed core in m_mkpasswd.c  (contrib)
25 < o) Reduced memory usage for channel members
26 < o) Added general::stats_e_disabled which simply disables "STATS e"
27 <   for other operators and administrators
28 < o) Ignore signal SIGXFSZ to prevent the daemon from dying on missconfigured
29 <   file size limits
30 < o) Slight optimizations to the block allocator
31 < o) Fixed harmless bug that could result in incorrect bytes sent statistics
32 <   in "STATS t"
33 < o) "STATS y|Y" now shows whether a class is active or disabled
34 < o) Added ircd-brazilian_pt.lang language file
35 < o) Misc. ACCEPT fixes. E.g. don't remove an accept record if a client is
36 <   changing between equivalent nicknames like 'nick' and 'NiCk'.
37 < o) Minor resolv.conf parser fixes.  Added missing support for ';' comments
38 < o) Fixed core on MODRESTART
39 <
40 <
41 < -- ircd-hybrid-7.2.1 RELNOTES
42 < o) Fixed build on SRV4
43 < o) Fixed problem where ircd would disconnect all SSL connections
44 < o) Added initial CAP support.  Additional documentation can be found
45 <   in doc/technical
46 < o) Speeded up command parsing
47 < o) Fixed occasional core dump on UN*LINE
48 < o) Fixed bug where particular clients would always receive
49 <   "Load is temporarily too heavy" message
50 < o) Improved memory consumption, i.e. memory consumption has
51 <   been reduced for remote clients
52 < o) Fixed possible core in case default_cipher_preference directive isn't set
53 < o) Fixed "CHANSERV INVITE" bug with anope services
54 < o) Updated example configuration files to reflect new topicburst flags
55 <   directive in connect{} blocks
56 < o) Fixed core if using the operator::umodes directive
57 < o) Don't allow shared k-lines to be set without a valid reason
58 < o) Improved channel ban match processing.  This also fixes CIDR bans
59 <
60 <
61 < -- ircd-hybrid-7.2.0 RELNOTES
62 < o) Fixed broken operwall = yes;
63 < o) Added 'umode' directive to oper{}.  List of modes to get on /OPER.
64 <   This behaves exactly like H6's sixth O line field
65 < o) Fixed a WHOIS bug
66 < o) Fixed bug where we would increase Count.invisi even
67 <   if general::invisible_on_connect is turned off
68 < o) Removed invite_ops_only, controlled by paranoid (+p) now
69 < o) Better DDoS protection
70 < o) Fixed va_list bug on amd64
71 < o) Fixed /dev/poll
72 <
73 <
74 < -- ircd-hybrid-7.2rc1 RELNOTES
75 < o) ircd can dynamically change all its client/fd limits at runtime
76 < o) Added epoll as the primary I/O engine under Linux
77 < o) Local channels will not show up in remote /WHOIS
78 < o) Added hidden_name which allows customized hidden server names
79 < o) Added restrict_channels to define a static channel set
80 < o) Added --disable-gline-voting to disable G-Line votes
81 <   for small networks or people who don't want it.
82 < o) Allow accumulating more ip= entries in an exempt{} block
83 < o) Various improvements and bugfixes
84 < o) Make win32 build usable
85 < o) Fixed ban caching bug
86 < o) Cosmetical fixes to TIME
87 < o) Get "KLINE nick" to work with clients that have a spoof
88 < o) Fixed RESV/XLINE bug in conjunction with names that include escaped
89 <   characters such as \*, \?, \#.
90 <
91 <
92 < -- ircd-hybrid-7.2beta1 RELNOTES
93 < o) Usermode +G, like +g, but allow messaging from people on common channels
94 < o) Usermode +D - "deaf", don't receive channel messages
95 < o) RXLINE and RKLINE - commands for setting perl compatible regular expression
96 <   based K and X lines
97 < o) Join flood is now detected and reported to +b opers
98 < o) Re-added REJECT_HOLD - lock clients for a while before throwing away
99 < o) ping_warning, a class{} option to notify opers before "Ping timeout"
100 < o) New hooking system, modularized: usermodes, iauth, message filtering etc.
101 < o) Network I/O speedups
102 < o) Various cleanups and bugfixes
103 < o) Support for client SSL
104 < o) Support for services (contrib/m_services.c)
105 < o) IP cloaking module (contrib/ip_cloaking.c)
106 < o) Native win32 build
107 < o) The password set in auth::password can now be encrypted
108 < o) Introduced new listen::flags directive.  Currently available flags are
109 <   'ssl' and 'hidden'.  Please read example.conf for further details
1 > -- Noteworthy changes in version 8.2.27 (2019-??-??)
2 > o) Fixed segfault with GnuTLS/libgmp in case there's no DH parameters file
3 >   defined in 'serverinfo::ssl_dh_param_file' or if that file is missing
4 > o) The connection timeout for connect{} blocks can now be configured via
5 >   the 'connect::timeout' configuration directive
6 >
7 >
8 > -- Noteworthy changes in version 8.2.26 (2019-05-31)
9 > o) The 'general::tkline_expire_notices' configuration directive has been
10 >   replaced with user mode 'X'. *LINE expiration notices are sent to IRC
11 >   operators with that mode set
12 > o) Fixed issue with '/rehash conf' creating duplicated class entries
13 >   instead of updating existing ones that are already in use
14 > o) For a full list of all changes in this release, see https://git.io/fjEbq
15 >
16 >
17 > -- Noteworthy changes in version 8.2.25 (2019-04-24)
18 > o) The 'class::number_per_ip', 'class::max_local' and 'class::max_global'
19 >   configuration directives have been replaced with just 'class::number_per_ip_local'
20 >   and 'class::number_per_ip_global'. The 'class::max_local' basically was
21 >   redundant as it had the same functionality as 'class::number_per_ip'
22 > o) Adding RESVs with wildcards no longer requires administrator privileges
23 > o) The 'general::ignore_bogus_ts' configuration option has been deprecated
24 > o) TLSv1.1 and TLSv1.0 are no longer supported and have been disabled in
25 >   the openssl and gnutls module
26 > o) Minimum supported OpenSSL version is 1.0.1f now
27 > o) Minimum supported GnuTLS version is 3.5.8 now
28 > o) The 'serverinfo::vhost' and 'serverinfo:vhost6' configuration directives have
29 >   been deprecated. If you need to bind() a specific address you can specify one
30 >   in the connect {} block
31 > o) The 'connect::vhost' configuration directive has been renamed to 'connect::bind'
32 > o) For a full list of all changes in this release, see https://git.io/fjRVk
33 >
34 >
35 > -- Noteworthy changes in version 8.2.24 (2018-04-05)
36 > o) Added "STATS s" to show configured pseudo {} blocks
37 > o) Implemented channel mode 'N' which prevents users from changing their
38 >   nick while in a channel with that mode set
39 > o) Services clients are now shown with 'is a Network Service' in "WHOIS"
40 > o) For a full list of all changes in this release, see https://git.io/fjRVt
41 >
42 >
43 > -- Noteworthy changes in version 8.2.23 (2018-03-26)
44 > o) irc-operators are now able to see a user's resolved hostname in /whowas,
45 >   and /whois even if the user has a fakehost/vhost
46 > o) RPL_WELCOME now does use the rfc2812 style nick!user@host format
47 > o) Removed rudimentary libgeoip support
48 > o) Added --enable-efence switch to allow easy linking with the
49 >   electric fence memory debugger library
50 > o) "JOIN 0" is no longer supported
51 > o) Fixed bug where ircd would not remove RPL_WHOISOPERATOR based svstags
52 >   when deoppering
53 > o) Fixed 'unknown closes' statistic in "STATS t" showing invalid values sometimes
54 > o) For a full list of all changes in this release, see https://git.io/fjRVq
55 >
56 >
57 > -- Noteworthy changes in version 8.2.22 (2017-03-26)
58 > o) Implemented channel mode 'L'. Channels with that mode set can make use of an
59 >   extended ban list size specified with the new 'channel::max_bans_large'
60 >   configuraton option. This mode can be set only by irc-operators or servers.
61 > o) Implemented channel mode 'u' which hides bmask (+b/+e/+I) lists and mode changes
62 >   to non-chanops everywhere
63 > o) Fixed an issue with "TRACE" where remote servers would reply with RPL_TRACEUSER
64 >   numerics containing UIDs
65 > o) "STATS z" now shows simple memory stats of servers linked to the network
66 > o) Added support for remote "ETRACE"
67 > o) For a full list of all changes in this release, see https://git.io/fjRVO
68 >
69 >
70 > -- Noteworthy changes in version 8.2.21 (2016-11-27)
71 > o) The 'general::default_floodtime' configuration option has been added
72 >   along with the "SET FLOODTIME" command. These allow to fine-tune the
73 >   message throttling better
74 > o) Fixed an issue with /invite not showing the list of channels the
75 >   sender is invited to
76 > o) For a full list of all changes in this release, see https://git.io/fjRVG
77 >
78 >
79 > -- Noteworthy changes in version 8.2.20 (2016-11-05)
80 > o) "INFO" now shows GnuTLS/OpenSSL library/header versions
81 > o) Added 'channel::max_invites' configuration option. See doc/reference.conf
82 >   for more information.
83 > o) INVITE expirations have been implemented. Expire time can be adjusted with
84 >   the 'channel::invite_expire_time' configuration directive
85 > o) /whois notices to operators have been re-added. User mode +y is required
86 >   to see them
87 > o) The maximum line length for motd files has been increased to 320 bytes
88 >   to support multibyte encodings better
89 > o) For a full list of all changes in this release, see https://git.io/fjRVZ
90 >
91 >
92 > -- Noteworthy changes in version 8.2.19 (2016-08-21)
93 > o) Fixed a possible server name leak in "WHO" with server hiding enabled
94 > o) "WHO" now allows opers to search by IP address
95 > o) Admins no longer can see IP addresses in "STATS P" with
96 >   'serverhide::hide_server_ips' enabled
97 > o) User mode 'n' now shows nick name changes from remote clients, too
98 > o) For a full list of all changes in this release, see https://git.io/fjRVC
99 >
100 >
101 > -- Noteworthy changes in version 8.2.18 (2016-06-22)
102 > o) Fixed an assert when a client sends invalid LIST options
103 > o) Fixed invalid memory stats of channel invites in "STATS z"
104 > o) For a full list of all changes in this release, see https://git.io/fjRSx
105 >
106 >
107 > -- Noteworthy changes in version 8.2.17 (2016-04-21)
108 > o) Fixed core on "REHASH CONF" with 'general::whowas_history_length'
109 >   set to 0
110 > o) Fixed possible core on "INVITE" with 'channel::max_channels' set to 0
111 > o) For a full list of all changes in this release, see https://git.io/fjRSp
112 >
113 >
114 > -- Noteworthy changes in version 8.2.16 (2016-03-20)
115 > o) Added 'general::whowas_history_length' configuration option which
116 >   allows to define the maximum length of the WHOWAS nickname history
117 > o) Services are now allowed to override 'general::min_nonwildcard',
118 >   and 'general::min_nonwildcard_simple' settings
119 > o) Minor updates to help files
120 > o) For a full list of all changes in this release, see https://git.io/fjRSj
121 >
122 >
123 > -- Noteworthy changes in version 8.2.15 (2016-02-24)
124 > o) Added proper support for Raspbian/ARM. Gracias to Beave/2600.net
125 >   for providing a box for testing purposes.
126 > o) Fixed an assert with empty user = "" directives in auth {} blocks
127 > o) "STATS z" now shows allocated listeners
128 > o) Fixed bug where 'can_flood' auth {} flags did not work on channels
129 > o) For a full list of all changes in this release, see https://git.io/fjR9v
130 >
131 >
132 > -- Noteworthy changes in version 8.2.14 (2016-02-09)
133 > o) Fixed server clustering
134 > o) Major cleanups to the configuration subsystem
135 > o) Improvements to libGeoIP support:
136 >   - Works now with IPv6 addresses
137 >   - Added 'libgeoip_database_options', 'libgeoip_ipv4_database_file',
138 >     and 'libgeoip_ipv6_database_file' configuration directives to the
139 >     serverinfo {} block
140 > o) Further improvements to GnuTLS support
141 > o) For a full list of all changes in this release, see https://git.io/fjR9f
142 >
143 >
144 > -- Noteworthy changes in version 8.2.13 (2016-02-02)
145 > o) Implemented support for GnuTLS. Currently ./configure's autodetection
146 >   intentionally prefers OpenSSL over GnuTLS, so OpenSSL detection needs
147 >   to be disabled explicitely by using the --disable-openssl switch.
148 > o) Minimum supported GnuTLS version is 3.3.8 now
149 > o) Minimum supported OpenSSL version is 1.0.1d now
150 > o) Added support for remote REHASH: REHASH <server> <option>
151 > o) Added 'rehash:remote' irc-operator privilege flag
152 > o) Added 'rehash' type to shared {} blocks
153 > o) Fixed minor memory leak with shared {} and cluster {} blocks
154 > o) For a full list of all changes in this release, see https://git.io/fjR9J
155 >
156 >
157 > -- Noteworthy changes in version 8.2.12 (2016-01-05)
158 > #######################################################################
159 > o) IMPORTANT: Character case mapping is 'ascii' now. It is recommended
160 >   to update all servers on the network to prevent possible channel
161 >   desynchronizations and nick name collision kills
162 > #######################################################################
163 > o) Added channel mode +T which forbids NOTICEs to be sent to a channel
164 > o) Fixed minor SVSTAG memory leak
165 > o) Fixed broken PART message blocking mechanism
166 > o) ircd now makes use of up to 8 name servers that are specified in
167 >   /etc/resolv.conf
168 > o) The -klinefile, -dlinefile, etc. switches didn't work at all
169 > o) Fixed possible core on ident lookups if ircd is out of file descriptors
170 > o) Far client exit notices (+F) now show IP addresses, too
171 > o) Made idle time look nicer in "STATS v|p" by using a formatted time string
172 > o) 'general::ts_warn_delta', and 'general::ts_max_delta' can be set to 0 now
173 > o) Several code cleanups and optimizations. Improved documentation
174 >
175 >
176 > -- Noteworthy changes in version 8.2.11 (2015-11-19)
177 > o) Implemented IRCv3.2 invite-notify extension
178 > o) Implemented IRCv3.2 chghost extension
179 > o) Added channel::invite_delay_channel configuration option
180 >
181 >
182 > -- Noteworthy changes in version 8.2.10 (2015-11-06)
183 > #######################################################################
184 > o) IMPORTANT: renamed 'serverhide::links_delay' configuration directive
185 >   to 'serverhide::flatten_links_delay'
186 > #######################################################################
187 > o) Added 'serverhide::flatten_links_file' configuration option
188 > o) Fixed bug where changing 'serverhide::flatten_links_delay' on runtime
189 >   would not have any effect
190 > o) mkpasswd (tools): fixed broken bcrypt support on *BSD in conjunction
191 >   with the -s and -l switches. Dropped MD5, DES and Extended DES support.
192 > o) Removed CHALLENGE in favor of ssl certificate fingerprint enabled
193 >   operator {} blocks
194 > o) RSA keys with less than 2048 bits are no longer supported; same applies
195 >   to the DH param file
196 > o) Added missing irc-operator privilege flags to /stats o. For a full list
197 >   of flags see doc/reference.conf
198 >
199 >
200 > -- Noteworthy changes in version 8.2.9 (2015-09-13)
201 > ########################################################################
202 > o) IMPORTANT: database files and links.txt are now stored in /var/lib
203 >   instead of /etc, so make sure to move your k/d/x-line database files
204 >   to the new path before (re)starting the ircd
205 > ########################################################################
206 > o) IMPORTANT: the splitmode logic has been removed along with the
207 >   following channel {} block configuration directives:
208 >   'default_split_user_count', 'default_split_server_count',
209 >   'no_create_on_split', 'no_join_on_split'
210 > ########################################################################
211 > o) Added 'xline_exempt' to auth {} block flags
212 > o) 'serverinfo::sid' is now optional. A unique SID is now automatically
213 >   generated based on the server's name and description
214 > o) Various fixes to the mkpasswd tool
215 > o) If supported by the compiler, ircd-hybrid now compiles with
216 >   '-fstack-protector-strong' instead of '-fstack-protector'
217 > o) Services can now add RESVs (SQLINEs) that have wildcards in it
218 > o) Channel name RESVs are now sanity checked for too broad masks
219 > o) 'class::connectfreq' now works properly with values lower than 300 seconds
220 > o) Implemented IRCv3.1 account-notify extension
221 > o) The 'general::oper_pass_resv' configuration directive has been deprecated
222 >   in favor of the new 'join:resv', and 'nick:resv' irc-operator flags.
223 >   See doc/reference.conf for more information.
224 > o) Added 'resv', and 'unresv' irc-operator flags. Previously, all
225 >   irc-operators were allowed to RESV and UNRESV, regardless of configured
226 >   privileges.
227 > o) Added 'close' to irc-operator flags
228 > o) ircd is using ISO 8601 date and time notation in most places now
229 >
230 >
231 > -- Noteworthy changes in version 8.2.8 (2015-05-10)
232 > o) ircd now rejects remote k-line requests for user@host mask that don't
233 >   have at least 'general::min_nonwildcard' non-wildcard characters in it
234 > o) Configuration related server notices are now sent to admins only as
235 >   they potentially could leak passwords and other sensitive data to irc
236 >   operators that don't have administrator privileges
237 > o) The GLINE/GUNGLINE commands have been removed. KLINE in conjunction
238 >   with cluster {} and/or shared {} blocks is now the recommended
239 >   way to add global user@host mask based server bans
240 > o) Added dline_min_cidr, dline_min_cidr6, kline_min_cidr, and kline_min_cidr6
241 >   configuration options to the general {} block
242 > o) Fixed bug where a REHASH would clear all X-Lines and RESVs that have
243 >   been set with the XLINE/RESV commands
244 > o) Fixed broken temporary remote XLINEs
245 > o) The 'general::havent_read_conf' configuration directive has been removed
246 > o) Various code cleanups
247 >
248 >
249 > -- Noteworthy changes in version 8.2.7 (2015-04-05)
250 > o) Fixed a potential buffer overflow with the BMASK inter-server command
251 > o) Fixed undefined behavior in the HELP command module which could
252 >   lead to stack corruption
253 > o) Removed useless help files for inter-server commands
254 >
255 >
256 > -- Noteworthy changes in version 8.2.6 (2015-03-29)
257 > o) INFO now shows configured values of 'max_watch' and 'stats_m_oper_only'
258 > o) WHOWAS now shows IP addresses to irc operators
259 > o) Fixed bug that would allow remote clients to bypass the hard
260 >   limit of max WHOWAS entries to be returned
261 > o) Code cleanups and performance improvements
262 >
263 >
264 > -- Noteworthy changes in version 8.2.5 (2015-02-24)
265 > o) Fixed core on Mac OSX 10.10 and possibly some other systems when parsing
266 >   the ircd.conf with configured pseudo {} blocks
267 >
268 >
269 > -- Noteworthy changes in version 8.2.4 (2015-02-17)
270 > o) Added SVSTAG command which services may use to add tags to users which can
271 >   be seen in /whois
272 > o) Added 'oper::whois' configuration option which allows to override the default
273 >   RPL_WHOISOPERATOR numeric string shown in /whois.
274 > o) IRC operators may now use +O on a channel even if they are only a half-op
275 > o) Fixed bug where TOPIC messages were not n!u@h prefixed in case of TBURST
276 >   issued by services clients
277 >
278 >
279 > -- Noteworthy changes in version 8.2.3 (2015-02-11)
280 > ########################################################################
281 > o) IMPORTANT: the following ircd.conf configuration directives have been renamed:
282 >
283 >   max_clients -> default_max_clients
284 >   join_flood_count -> default_join_flood_count
285 >   join_flood_time -> default_join_flood_time
286 > ########################################################################
287 > o) Fixed bug where "/rehash" would always reset the "MAX", "JFLOODTIME", and
288 >   "JFLOODCOUNT" values that have been changed from within IRC via the "/set"
289 >   command
290 > o) Added channel mode +C which prevents users from sending CTCPs to a channel
291 > o) Fixes to the NOTICE/PRIVMSG anti-flood logic
292 > o) Allow to disable the NOTICE/PRIVMSG anti-flood mechanism by setting the
293 >   'general::default_floodcount' configuration option to 0
294 > o) Updated some help files
295 > o) Minor code cleanups and improvements
296 > o) Operators may now see certificate fingerprints, user modes and hidden
297 >   channels via WHOIS as well. This used to be admin only.
298 >
299 >
300 > -- Noteworthy changes in version 8.2.2 (2015-01-20)
301 > o) Implemented IRCv3.1 extended-join extension
302 > o) Channel half-ops can now use INVITE as well
303 > o) Fixed broken 'make install -jX'
304 > o) m_opme.c has been added to modules/extra. Can be used on opless channels only.
305 > o) Added 'opme' to irc-operator flags
306 > o) Updated several help files
307 > o) The 'general::hide_spoof_ips' configuration option has been deprecated
308 > o) The 'general::true_no_oper_flood' configuration option has been deprecated.
309 >   Operators still can have higher 'flood' limits with no_oper_flood = yes;
310 >   hoewever, they are no longer allowed to bypass RecvQ limits.
311 > o) Added 'general::stats_m_oper_only' configuration option
312 > o) Remote client connection notices (user mode +F) now do show IP addresses, too
313 >
314 >
315 > -- Noteworthy changes in version 8.2.1 (2014-10-21)
316 > o) Fixed bug where "UNDLINE remote.server IP" did not work as expected
317 > o) Servers are now allowed to add/remove K-/D-/X-lines and RESVs
318 > o) Usermode +G now no longer allows to override +g
319 > o) Due to potential weakness, TLS session caching and session tickets
320 >   have been disabled
321 > o) Minor improvements to TS6 implementation
322 > o) WHOWAS now shows the name of the services account a user was logged in
323 >
324 >
325 > -- Noteworthy changes in version 8.2.0 (2014-08-24)
326 > o) Successful operator logins are now announced globally via GLOBOPS
327 > o) Cleanups and improvements to the resolver code
328 > o) Cleanups and improvements to the poll() I/O event notification support
329 > o) A topic mask can now be specified within the LIST options
330 > o) All users may now see channel modes in the /list reply
331 > o) Fixed bug where "NOTICE +#somechan" did allow bypassing resv {} channels,
332 >   or channels that are set +c (no control codes)
333 > o) pseudo {} blocks also known as service aliases have been implemented.
334 >   See doc/reference.conf for more information.
335 > o) Removed 'general::services_name' configuration option. This is now no
336 >   longer needed.
337 >
338 >
339 > -- Noteworthy changes in version 8.2.0rc2 (2014-08-03)
340 > o) Improved AWAY throttling to allow for better fine-tuning. See the
341 >   newly added 'away_count' and 'away_time' configuration directives
342 >   in the general {} block
343 > o) Support for the select() I/O event notification has been dropped
344 > o) Minor code cleanups and improvements
345 >
346 >
347 > -- Noteworthy changes in version 8.2.0rc1 (2014-07-20)
348 > o) Miscellaneous code cleanups and stabilization fixes
349 > o) ./configure now requires OpenSSL 0.9.8o or above in order
350 >   to enable TLS/SSL support
351 >
352 >
353 > -- Noteworthy changes in version 8.2.0beta4 (2014-07-06)
354 > #####################################################################
355 > o) IMPORTANT: channel halfops are now an integral part of ircd-hybrid
356 >   and can't be disabled anymore
357 > #####################################################################
358 > o) Many code cleanups and improvements
359 > o) Added flood control for the INVITE command. See channel {} block in reference.conf
360 > o) Changed flood control logic for the KNOCK command. See channel {} block in reference.conf
361 > o) INVITE without any parameters now shows a list of channels a client is invited to
362 > o) The OPERWALL command has been removed. Use GLOBOPS instead
363 > o) Added 'max_channels' to class {} blocks
364 > o) Added 'throttle_count' configuration option to the general {} block
365 > o) Added 'ssl_message_digest_algorithm' configuration option to serverinfo {} block.
366 >   See doc/reference.conf for more information.
367 > o) Added support for Elliptic Curve Diffie-Hellman (ECDH). Also an elliptic curve can be
368 >   specified via the 'serverinfo::ssl_dh_elliptic_curve' configuration option.
369 > o) Removed 'ssl_server_method' and 'ssl_client_method' configuration options.
370 >   ircd now only allows TLSv1, TLSv1.1 and TLSv1.2 protocols depending
371 >   on the OpenSSL version. SSLv3 is no longer supported.
372 >
373 >
374 > -- Noteworthy changes in version 8.2.0beta3 (2014-05-26)
375 > o) Code cleanups/performance improvements
376 >
377 >
378 > -- Noteworthy changes in version 8.2.0beta2 (2014-05-15)
379 > #########################################################################
380 > o) IMPORTANT: renamed 'general::warn_no_nline' configuration directive to
381 >   'general::warn_no_connect_block'
382 > #########################################################################
383 > o) Fixed bug with WHOIS not showing a list of channel names as expected
384 > o) Added usermode +q which hides idle and signon time in WHOIS
385 > o) Added usermode +p which hides channel list in WHOIS
386 >
387 >
388 > -- Noteworthy changes in version 8.2.0beta1 (2014-04-29)
389 > o) TS6 is now mandatory. ircd is no longer backwards compatible with TS5
390 >   and below.
391 > o) SVSJOIN and SVSPART commands have been added
392 > o) Major code cleanups and refactoring. Improved overall performance
393 > o) INFO now also reports MPATH (path to main motd (Message of the Day) file)
394 >   and SPATH (Path to server executable)
395 > o) Updated several help files
396 >
397 >
398 > -- Noteworthy changes in version 8.1.20 (2014-07-20)
399 > o) Fixed XLINE not working as expected
400 > o) Fixed build with LibreSSL which hasn't compression support
401 > o) Miscellaneous stabilization and cosmetical fixes
402 > o) EGD support has been dropped
403 >
404 >
405 > -- Noteworthy changes in version 8.1.19 (2014-07-05)
406 > o) Fixed EOB logic for remote servers
407 > o) Fixed bug where opers that have the +g/+G/+R umodes set won't receive server
408 >   notices for remote CONNECT/KLINE/DLINE/XLINE/RESV attempts
409 > o) Sending messages to user@server to local targets is now no longer possible,
410 >   as this was an easy way to bypass +R/+G/+g user modes.
411 > o) Fixed splicode logic so SPLITNUM now works as expected
412 > o) Fixed UNDLINE not to require the IP address to be prepended with *@
413 >
414 >
415 > -- Noteworthy changes in version 8.1.18 (2014-06-09)
416 > o) Fixed CAP issue for certain clients
417 > o) Fixed bug where "STATS p" would show an invalid amount of irc-operators
418 >   in case there are any +H opers
419 > o) irc-operators may now no longer set a channel +O if they are only halfops (%)
420 > o) Channel halfops (%) may now no longer (de)halfop other channel members
421 > o) Channel halfops (%) may now no longer KICK other channel halfops
422 > o) Fixed compile warnings; code cleanups
423 > o) Fixed bug where the configuration parser wouldn't truncate the network name
424 >   if 'general::network_name' contains spaces
425 >
426 >
427 > -- Noteworthy changes in version 8.1.17 (2014-05-01)
428 > o) Fixed possible WATCH core
429 > o) Fixed bug where the configuration parser wouldn't take time units
430 >   into consideration for the join_flood_time and throttle_time
431 >   configuration options
432 > o) Minor LIST optimization
433 >
434 >
435 > -- Noteworthy changes in version 8.1.16 (2014-04-20)
436 > o) Fixed undefined behaviour with crypt() returning NULL
437 >   since glibc2.17 in certain cases
438 > o) Admins may now see all channel members via "WHO #channel"
439 >   regardless of channel mode +s
440 > o) Fixed corrupted "STATS U" output
441 >
442 >
443 > -- Noteworthy changes in version 8.1.15 (2014-03-29)
444 > ########################################################################
445 > o) IMPORTANT: ircd binary is now again placed into bin/ instead of sbin/
446 > ########################################################################
447 > o) mkpasswd in tools/ now defaults to MD5 instead of DES
448 > o) The USERS command has been removed
449 > o) Fixed issue with SVSNICK where clients self-collided when changing
450 >   just the case of the nick name, i.e. somenick -> SomeNicK
451 > o) Minor code cleanups and cosmetical fixes
452 >
453 >
454 > -- Noteworthy changes in version 8.1.14 (2014-02-25)
455 > o) WHOWAS now honors 'serverhide::disable_remote_commands'
456 > o) Improved TS6 inter-server communication
457 > o) Minor code cleanups and speed enhancements
458 > o) Added 'unxline' oper flag
459 > o) Implemented IRCv3.2 userhost-in-names extension
460 > o) ircd now allows private RSA keys larger than 2048 bits
461 > o) Fixed bug where signals stopped from working after restarting
462 >   the ircd via SIGINT
463 > o) Fixed bug where certain irc clients could not reconnect via TLS/SSL
464 > o) Fixed long-standing bug where +p channels have been shown
465 >   in the WHOIS reply
466 >
467 >
468 > -- Noteworthy changes in version 8.1.13 (2014-01-07)
469 > o) Fixed EOB not working for remote servers (resulted in fake direction notices)
470 > o) Fixed remote client connection notices for servers that are
471 >   more than one hop away
472 > o) Fixed bug where the ircd didn't timeout SSL connections that
473 >   haven't finished the SSL handshake
474 > o) Fixed several bugs with server hiding
475 > o) Updated/fixed help files
476 > o) WHOIS no longer sends a notice to +y operators
477 >
478 >
479 > -- Noteworthy changes in version 8.1.12 (2013-12-22)
480 > o) RPL_WHOISMODES now uses the 379 numeric
481 > o) Serial number is now shown on start up
482 > o) Fixed possible channel mode desynch with services
483 > o) Fixed TS6 support with LOCOPS
484 > o) Minor code cleanups
485 > o) Fixed file descriptor leak with empty help files
486 > o) Fixed issue with WEBIRC where hostnames were not validated
487 >
488 >
489 > -- Noteworthy changes in version 8.1.11 (2013-12-06)
490 > o) Administrators may now see channel modes in LIST
491 > o) Fixed compile error on BSD systems when building with kqueue()
492 >
493 >
494 > -- Noteworthy changes in version 8.1.10 (2013-11-25)
495 > o) Fixed bug with kqueue() where it occasionally dropped updates
496 > o) Changed WHOIS to show certificate fingerprint to administrators only
497 > o) The WHO reply now shows if a nickname has been registered
498 >   with NickServ. ('r' status flag)
499 > o) Fixed some flaws with server hiding
500 > o) Fixed bug where "STATS P" would leak ip addresses to remotely connected
501 >   administrators, even if 'serverhide::hide_server_ips' was set to 'yes'
502 > o) Added SVSKILL command
503 >
504 >
505 > -- Noteworthy changes in version 8.1.9 (2013-11-08)
506 > o) Added usermode +W. Users connected via a webirc gateway get this
507 >   mode set by servers.
508 > o) WHOIS now shows if a client is connected via a webirc gateway
509 > o) Administrators may now see +s channels a user is in with WHOIS.
510 >   Secret channels are prepended with a tilde in the WHOIS reply.
511 > o) Administrators are now able to see all the user modes a user has
512 >   set via WHOIS
513 >
514 >
515 > -- Noteworthy changes in version 8.1.8 (2013-10-25)
516 > o) Fixed bug that could lead to a desynchronized nick database
517 >   throughout the entire network if using services enforced
518 >   nick names (SVSNICK)
519 > o) Cleaned up/modernized build system
520 > o) Add -fstack-protector to CFLAGS if available. Basically checks for
521 >   buffer overflows/stack-smashing attacks
522 > o) When using anope 1.9/2.0 services, WHOIS now shows the account name
523 >   of a registered/identified client (numeric 330)
524 > o) Administrators can now see +s channels in the LIST reply
525 >
526 >
527 > -- Noteworthy changes in version 8.1.7 (2013-08-18)
528 > o) Fixed issue with channel mode +n having no functionality at all
529 > o) Fixed SSL certificate fingerprint validation for outgoing server connects
530 > o) Updated several documentation files
531 >
532 >
533 > -- Noteworthy changes in version 8.1.6 (2013-08-02)
534 > o) Fixed possible core with empty motd files
535 >
536 >
537 > -- Noteworthy changes in version 8.1.5 (2013-07-16)
538 > o) Fixed bug that would prevent servers from linking together
539 >   if 'connect::aftype' isn't set
540 >
541 >
542 > -- Noteworthy changes in version 8.1.4 (2013-07-05)
543 > o) Added 'xline' and 'resv' logging types. See doc/reference.conf
544 >   for more information
545 > o) Fixed bug where remote STATS requests were not rate limited
546 > o) Fixed core with empty 'auth::spoof' entries
547 > o) Increased oper/auth/connect password length limit from 20 to 128
548 > o) Minor fixes to nickflood control code
549 >
550 >
551 > -- Noteworthy changes in version 8.1.3 (2013-06-23)
552 > o) Fixed possible core on "STATS z"
553 > o) Revised doc/reference.conf
554 > o) Fixed broken --disable-libgeoip switch
555 >
556 >
557 > -- Noteworthy changes in version 8.1.2 (2013-06-20)
558 > o) Added 'general::cycle_on_host_change' configuration option
559 > o) Added 'general::stats_u_oper_only' configuration option
560 > o) Added support for SHA-256 ssl certificate fingerprint based operator {}
561 >   and connect {} blocks.
562 >   In conjunction with Anope 1.9/2.0 IRC-services, clients are now also able
563 >   to automatically identify for their nick with ssl certificate
564 >   fingerprints
565 > o) Added 'operator::ssl_connection_required' configuration option. See
566 >   doc/reference.conf for more information
567 > o) Added usermode +S (client is connected via SSL/TLS). Allows services
568 >   to keep track of what users are connected via SSL, and allows to see
569 >   ssl-status of remote clients in a /whois
570 > o) Fixed a server name leak with server hiding enabled
571 >
572 >
573 > -- Noteworthy changes in version 8.1.1 (2013-06-06)
574 > ########################################################################
575 > o) IMPORTANT: moved disable_remote_command configuration directive from
576 >   general {} block to serverhide {} block
577 > ########################################################################
578 > o) Minor code cleanups/performance improvements
579 > o) Fixed bug where opers could see LOCOPS messages even if they don't have
580 >   the +l mode set
581 > o) Fixed bug where non-SSL clients could join +S channels on non-SSL servers
582 > o) Implemented motd {} configuration blocks. See doc/reference.conf for more
583 >   information
584 > o) "STATS T" shows configured MOTD files
585 >
586 >
587 > -- Noteworthy changes in version 8.1.0 (2013-05-23)
588 > o) Minor code cleanups/performance improvements
589 >
590 >
591 > -- Noteworthy changes in version 8.1.0rc1 (2013-05-19)
592 > o) Fixed broken spoofs
593 >
594 >
595 > -- Noteworthy changes in version 8.1.0beta5 (2013-05-15)
596 > o) Removed 'remote', and 'global_kill' oper flags, and added 'connect',
597 >   'squit', and 'kill' flags for better fine-tuning instead. Whether or
598 >   not a specific action is allowed on a remote server can be controlled
599 >   by appending the ':remote' flag. For example: 'kill' allows only local
600 >   clients to be killed, whereas 'kill:remote' allows to issue a KILL for
601 >   remote clients
602 > o) Added 'locops' and 'wallops' to irc-operator flags
603 > o) Improve/cleanup HELP system
604 >
605 >
606 > -- Noteworthy changes in version 8.1.0beta4 (2013-05-09)
607 > o) Implemented channel mode +M. Clients that haven't identified their
608 >   name with NickServ may not speak in a channel that has this mode set
609 > o) Fixed weird idletimes shown in /trace
610 > o) Added 'nononreg' (+R) to 'general::oper_umodes'
611 > o) Added user mode +F (can see remote client connect/exit notices)
612 >
613 >
614 > -- Noteworthy changes in version 8.1.0beta3 (2013-05-05)
615 > o) PCRE support has been dropped
616 > o) "STATS o" now shows how many times an operator {} block has been used.
617 >   Similar to "STATS x|q"
618 > o) Implemented channel mode +c. Known from other ircds, this mode basically
619 >   prevents users from sending messages including control codes to a channel
620 >   that has this mode set
621 > o) Fixed bug where bans were not checked against non-channel members when
622 >   sending messages to a channel
623 > o) Removed 'channel::quiet_on_ban' configuration option. This feature is
624 >   now enabled by default
625 >
626 >
627 > -- Noteworthy changes in version 8.1.0beta2 (2013-04-28)
628 > o) Fixed broken compile with libGeoIP disabled
629 > o) Code cleanups; working towards stabilization and improved performance
630 > o) Removed operflag 'nick_changes'. Operators can now set +n at will
631 > o) Fixed shared {} blocks not working as expected
632 > o) Fixed spoofs not working as expected
633 >
634 >
635 > -- Noteworthy changes in version 8.1.0beta1 (2013-04-25)
636 > #######################################################################
637 > o) IMPORTANT: name/channel entries can't be stacked any longer within a
638 >   single resv {} block. Each entry now requires its own resv {} block.
639 >   Read doc/reference.conf for more details
640 > #######################################################################
641 > o) Added 'resv::exempt' configuration option. Exempt can be either a
642 >   ISO 3166 alpha-2 two letter country code, or a nick!user@host mask.
643 >   CIDR is supported
644 > o) Removed 'channel::restrict_channels' configuration option
645 > o) Preliminary libGeoIP support. Currently only used for exempt entries
646 >   in resv {} blocks
647 > o) Improved WEBIRC authentication; added 'webirc' to 'auth::flags'.
648 >   A "webirc." spoof is now no longer required
649 > o) Implemented new memory pool allocator which basically is based upon Tor's
650 >   mempool allocator for Tor cells
651 > o) Major code cleanups
652 > o) Implemented new binary database storage for X-, D-, K-, G-Lines and RESVs.
653 >   Temporary bans are now stored as well and will persist after a reboot
654 > o) Channel based resv {} blocks may now contain wildcards
655 > o) NICK/JOIN now shows the actual reason of reserved nick-/channelnames
656 > o) contrib/ and its content has been enirely removed from the tree
657 > o) Added 'serverhide::hide_services' configuration option
658 > o) Added 'nononreg' (+R) to 'oper::umodes' and 'general::oper_only_modes'
659 > o) Implemented IRCv3.1 away-notify extension
660 >
661 >
662 > -- Noteworthy changes in version 8.0.9 (2013-05-16)
663 > o) Fixed bug where ircd would sometimes drop a services link because
664 >   of a missing argument to the "SVSMODE" command
665 > o) Fixed weird idletimes shown in /trace
666 >
667 >
668 > -- Noteworthy changes in version 8.0.8 (2013-04-28)
669 > o) "STATS s" now shows configured services {} blocks as well
670 > o) Fixed compile warnings, minor code cleanups and optimizations
671 > o) Increased nickname history length to 32768
672 > o) Unidentified/unregistered nicks may not speak in +R channels
673 >
674 >
675 > -- Noteworthy changes in version 8.0.7 (2013-04-12)
676 > o) Services may now set a channel topic without joining the channel first
677 > o) Fixed bug where WHOIS would send empty sockhost information on TS5 servers
678 > o) Remote server connection and split notices now go to new usermode +e.
679 >   These previously used usermode +x.
680 > o) Services may now change the host of a specific user
681 >   via "SVSMODE <timestamp> <target> +x <hostname>"
682 >
683 >
684 > -- Noteworthy changes in version 8.0.6 (2013-01-28)
685 > o) Fix bug where idle time sometimes is 0 even if the client didn't
686 >   send any private message
687 > o) Fixed possible core in try_parse_v4_netmask()
688 >
689 >
690 > -- Noteworthy changes in version 8.0.5 (2013-01-24)
691 > ########################################################################
692 > o) IMPORTANT: nick and topic lengths are now configurable via ircd.conf.
693 >   A max_nick_length, as well as a max_topic_length configuration option
694 >   can now be found in the serverinfo {} block
695 > ########################################################################
696 > o) Fixed build on GNU/Hurd
697 > o) Fixed log files not getting reopened after /rehash
698 > o) Improved logging of configuration file issues
699 > o) ircd.pid has been accidentally saved in /var instead of /var/run
700 > o) Linux RT signal support for notification of socket events has been dropped
701 > o) Fixed "STATS Y|y" sometimes sending weird sendq/recvq values
702 > o) INFO now also shows configured values of 'disable_fake_channels',
703 >   and 'stats_e_disabled'
704 > o) m_webirc.c is now officially supported, and has been moved from contrib/
705 >   to modules/
706 > o) /whois, /stats p, and /trace may now show fake idle times depending
707 >   on how the new 'class::min_idle' and class::max_idle configuration
708 >   directives have been configured. This feature basically works in the
709 >   same way as it does in csircd
710 > o) The configuration parser now does support 'year' and 'month' units
711 >
712 >
713 > -- Noteworthy changes in version 8.0.4 (2013-01-02)
714 > o) Fixed possible core on USERHOST/ISON with optimization enabled
715 > o) Fixed bug where 'can_flood' sometimes didn't work as expected
716 >
717 >
718 > -- Noteworthy changes in version 8.0.3 (2012-12-24)
719 > o) Fixed core on UNDLINE
720 > o) XLINE/KLINE/RESV/DLINE/SQUIT and KILL now have the same default reason
721 >   if a reason hasn't been specified
722 >
723 >
724 > -- Noteworthy changes in version 8.0.2 (2012-12-20)
725 > o) Minor updates to the build system
726 > o) Fixed broken --enable-assert configure switch
727 > o) Fixed bug where timed events stopped from working if the system's
728 >   clock is running backwards
729 > o) STATS q|Q now shows how many times a resv {} block has been matched
730 > o) Fixed contributed WEBIRC module
731 > o) IRC operators may now again see server generated nick rejection notices
732 >
733 >
734 > -- Noteworthy changes in version 8.0.1 (2012-11-04)
735 > o) Fixed broken CIDR support for CHALLENGE based irc operator logins
736 > o) Fixed class limits not properly applying to operator {} blocks
737 > o) Fixed possible TBURST desynchronization with services
738 > o) Fixed TBURST from leaking the server name if it's a hidden server
739 >
740 >
741 > -- Noteworthy changes in version 8.0.0 (2012-10-18)
742 > o) Fixed an off-by-one with spoofs. Spoofs are now also checked for
743 >   invalid characters
744 > o) Removed 'general::use_whois_actually' configuration directive.
745 >   This is now enabled by default
746 > o) Minor SQUIT handling fixes
747 > o) Fixed bancache not being updated on CHGHOST/CHGIDENT
748 >
749 >
750 > -- Noteworthy changes in version 8.0.0rc1 (2012-09-28)
751 > o) Removed 'general::client_flood' configuration option and added the
752 >   new 'recvq' configuration directive to class {} blocks.
753 >   The max size of a receive queue can be seen in "STATS Y"
754 >   for each class
755 > o) Allow the '[' and ']' characters in server description
756 >
757 >
758 > -- Noteworthy changes in version 8.0.0beta3 (2012-08-24)
759 > o) Fixed wrong syntax in several language files
760 > o) Removed &localchannels
761 > o) PRIVMSG to opers@some.server is no longer supported
762 > o) Fixed bug that could lead to topic desynchronization
763 > o) Removed 'serverhide::disable_hidden' configuration option
764 > o) Dropped ircd-hybrid-6 GLINE compatibility mode
765 > o) Removed use_invex, use_except and use_knock configuration options.
766 >   These features are now enabled by default
767 >
768 >
769 > -- Noteworthy changes in version 8.0.0beta2 (2012-07-21)
770 > o) 'channel::disable_fake_channels' now also disables ascii 29 (mIRC italic)
771 >   when set to yes
772 > o) Added 'channel::max_chans_per_oper' configuration directive. The old way
773 >   was to let operators join three times the amount of max_chans_per_user
774 > o) Replaced MODLOAD, MODUNLOAD, MODRELOAD, MODLIST and MODRESTART commands
775 >   with the new MODULE command which can be fed with the LOAD, UNLOAD, RELOAD
776 >   and LIST parameters.
777 >   MODRESTART has been entirely removed. Use "MODULE RELOAD *" to reload
778 >   all modules
779 > o) Added back server notice when a client tries to obtain a reserved nick name
780 > o) Removed OMOTD module
781 > o) Added 'set' to operator privilege flags. Gives access to the "SET" command
782 > o) Improved TS6 support
783 > o) Channel keys/passwords are now case sensitive
784 >
785 >
786 > -- Noteworthy changes in version 8.0.0beta1 (2012-05-28)
787 > o) Implemented full services support, including but not limited to the
788 >   following changes:
789 >   - Added SVSNICK, and SVSMODE command handlers
790 >   - Added service stamps to NICK/UID messages
791 >   - Added SVS to server capabilities (CAPAB). SVS capable servers can
792 >     deal with extended NICK/UID messages that contain service IDs/stamps.
793 >   - Changed rejected client notices to go to new usermode +j.  These
794 >     previously used usermode +r.
795 >   - Added usermode +r (registered nick) and channelmode +r (registered channel)
796 >   - Added usermode +R (only registered clients may send a private message)
797 >   - Added channelmode +R (only registered clients may join that channel)
798 >   - Various services shortcuts have been added (/NS, /CS, /NICKSERV, /CHANSERV, etc.)
799 >   - Added services {} block to ircd.conf
800 >   - Added services_name directive to general {} block
801 >   - Added GLOBOPS mainly for services compatibility, but can be used by operators, too
802 > o) Removed RKLINE and RXLINE commands. Regular expression based bans should
803 >   only be added via ircd.conf
804 > o) Added 'globops', 'restart', 'dline', 'undline' and 'module' operator
805 >   privilege flags. Read doc/reference.conf for further explanation of what
806 >   these flags control
807 > o) Removed Idle-time klines
808 > o) Cleaned up modules API. Old modules won't work anymore
809 > o) Removed 'general::burst_away' configuration directive. AWAY bursts are now
810 >   controlled via 'connect::flags' explicitly
811 > o) Introduced new logging subsystem including log rotation based on
812 >   file sizes. Log timestamp format is ISO8601 now
813 > o) Added support for remote D-lines
814 > o) Added usermode +H which is basically a replacement for the hidden_admin and
815 >   hidden_oper operator flags. With usermode +H, irc operator status can now
816 >   be hidden even on remote servers
817 > o) Added CIDR support for operator {} blocks
818 > o) Removed the servlink program. ircd-hybrid can now make use of
819 >   SSL/TLS for inter-server communication.
820 >   NOTE: compressed server links are of course still available, but a SSL/TLS
821 >   connection is required, as compression is now handled via OpenSSL
822 > o) Removed 'ssl_server_protocol' configuration directive and
823 >   added 'ssl_client_method' and 'ssl_server_method' instead.
824 >   Both of these options can now be changed at runtime
825 > o) Oper login IDs are no longer limited to NICKLEN*2
826 > o) Removed 'channel::burst_topicwho' configuration option. This feature is now
827 >   enabled by default
828 > o) "STATS Y|y" now reports CIDR limits as well
829 > o) Added m_webirc.c to contrib/
830 > o) Overall code cleanup and speed improvements
831  
832   --------------------------------------------------------------------------------
833  
113 BUGS: Major bugs in this release are listed in BUGS
114
834   BUG REPORTS: If you run this code and encounter problems, you must report
835 < the bug in one of the following ways:
836 <  a) By EMAIL to bugs@ircd-hybrid.org
837 <  b) On http://forum.ircd-hybrid.org/
119 < Please include a gdb backtrace and a copy of your setup.h and
120 < ircd.conf with any report  (with passwords and other sensitive
835 > the bug by EMAIL to bugs@ircd-hybrid.org
836 > Please include a gdb backtrace and a copy of your config.h and
837 > ircd.conf with any report (with passwords and other sensitive
838   information masked).
839  
840   DISCUSSION: There is a mailing list for discussion of hybrid issues,
841 < including betas.  To subscribe, use this link:
841 > including betas. To subscribe, use this link:
842      https://lists.ircd-hybrid.org/mailman/listinfo/hybrid
843 < This is the proper place to discuss new features, bugs, etc.  Posting here
127 < is much more likely to get something done than ranting on #TZ.
128 < You can also use Hybrid forums at http://forum.ircd-hybrid.org/
843 > This is the proper place to discuss new features, bugs, etc.
844  
845   Questions/comments directed to bugs@ircd-hybrid.org
846  
847 < Please read doc/whats-new.txt for information about what is in this release
133 <
134 < Other files recommended for reading: BUGS, README.FIRST, INSTALL
847 > Other files recommended for reading: README, INSTALL
848  
849   --------------------------------------------------------------------------------
850   $Id$

Comparing:
ircd-hybrid-7.2/RELNOTES (property svn:keywords), Revision 867 by michael, Thu May 17 14:59:27 2007 UTC vs.
ircd-hybrid/trunk/NEWS (property svn:keywords), Revision 9096 by michael, Wed Dec 25 15:53:01 2019 UTC

# Line 1 | Line 1
1 < Id Revision
1 > Id

Diff Legend

Removed lines
+ Added lines
< Changed lines (old)
> Changed lines (new)