[ViewVC] Diff of: svn/ircd-hybrid/trunk/NEWS

Comparing ircd-hybrid/trunk/NEWS (file contents):
Revision 6539 by michael, Sun Sep 13 16:07:44 2015 UTC vs.
Revision 7366 by michael, Wed Feb 24 12:40:19 2016 UTC

-+
+-- Noteworthy changes in version 8.2.15 (2016-02-24)
-+
+o) Added proper support for Raspbian/ARM. Gracias to Beave/2600.net
-+
+   for providing a box for testing purposes.
-+
+o) Fixed an assert with empty user = "" directives in auth {} blocks
-+
+o) "STATS z" now shows allocated listeners
-+
+o) Fixed bug where 'can_flood' auth {} flags did not work on channels
-+
-+
-+
+-- Noteworthy changes in version 8.2.14 (2016-02-09)
-+
+o) Fixed server clustering
-+
+o) Major cleanups to the configuration subsystem
-+
+o) Improvements to libGeoIP support:
-+
+   - Works now with IPv6 addresses
-+
+   - Added 'libgeoip_database_options', 'libgeoip_ipv4_database_file',
-+
+     and 'libgeoip_ipv6_database_file' configuration directives to the
-+
+     serverinfo {} block
-+
+o) Further improvements to GnuTLS support
-+
-+
-+
+-- Noteworthy changes in version 8.2.13 (2016-02-02)
-+
+o) Implemented support for GnuTLS. Currently ./configure's autodetection
-+
+   intentionally prefers OpenSSL over GnuTLS, so OpenSSL detection needs
-+
+   to be disabled explicitely by using the --disable-openssl switch.
-+
+o) Minimum supported GnuTLS version is 3.3.8 now
-+
+o) Minimum supported OpenSSL version is 1.0.1d now
-+
+o) Added support for remote REHASH: REHASH <server> <option>
-+
+o) Added 'rehash:remote' irc-operator privilege flag
-+
+o) Added 'rehash' type to shared {} blocks
-+
+o) Fixed minor memory leak with shared {} and cluster {} blocks
-+
-+
-+
+-- Noteworthy changes in version 8.2.12 (2016-01-05)
-+
+#######################################################################
-+
+o) IMPORTANT: Character case mapping is 'ascii' now. It is recommended
-+
+   to update all servers on the network to prevent possible channel
-+
+   desynchronizations and nick name collision kills
-+
+#######################################################################
-+
+o) Added channel mode +T which forbids NOTICEs to be sent to a channel
-+
+o) Fixed minor SVSTAG memory leak
-+
+o) Fixed broken PART message blocking mechanism
-+
+o) ircd now makes use of up to 8 name servers that are specified in
-+
+   /etc/resolv.conf
-+
+o) The -klinefile, -dlinefile, etc. switches didn't work at all
-+
+o) Fixed possible core on ident lookups if ircd is out of file descriptors
-+
+o) Far client exit notices (+F) now show IP addresses, too
-+
+o) Made idle time look nicer in "STATS v|p" by using a formatted time string
-+
+o) 'general::ts_warn_delta', and 'general::ts_max_delta' can be set to 0 now
-+
+o) Several code cleanups and optimizations. Improved documentation
-+
-+
-+
+-- Noteworthy changes in version 8.2.11 (2015-11-19)
-+
+o) Implemented IRCv3.2 invite-notify extension
-+
+o) Implemented IRCv3.2 chghost extension
-+
+o) Added channel::invite_delay_channel configuration option
-+
-+
-+
+-- Noteworthy changes in version 8.2.10 (2015-11-06)
-+
+#######################################################################
-+
+o) IMPORTANT: renamed 'serverhide::links_delay' configuration directive
-+
+   to 'serverhide::flatten_links_delay'
-+
+#######################################################################
-+
+o) Added 'serverhide::flatten_links_file' configuration option
-+
+o) Fixed bug where changing 'serverhide::flatten_links_delay' on runtime
-+
+   would not have any effect
-+
+o) mkpasswd (tools): fixed broken bcrypt support on *BSD in conjunction
-+
+   with the -s and -l switches. Dropped MD5, DES and Extended DES support.
-+
+o) Removed CHALLENGE in favor of ssl certificate fingerprint enabled
-+
+   operator {} blocks
-+
+o) RSA keys with less than 2048 bits are no longer supported; same applies
-+
+   to the DH param file
-+
+o) Added missing irc-operator privilege flags to /stats o. For a full list
-+
+   of flags see doc/reference.conf
-+
-+
+-- Noteworthy changes in version 8.2.9 (2015-09-13)
+########################################################################
+o) IMPORTANT: database files and links.txt are now stored in /var/lib
+   'no_create_on_split', 'no_join_on_split'
+########################################################################
+o) Added 'xline_exempt' to auth {} block flags
-<
+o) serverinfo::sid is now optional. A unique SID is now automatically
->
+o) 'serverinfo::sid' is now optional. A unique SID is now automatically
+   generated based on the server's name and description
+o) Various fixes to the mkpasswd tool
+o) If supported by the compiler, ircd-hybrid now compiles with
+   '-fstack-protector-strong' instead of '-fstack-protector'
+o) Services can now add RESVs (SQLINEs) that have wildcards in it
+o) Channel name RESVs are now sanity checked for too broad masks
-<
+o) class::connectfreq now works properly with values lower than 300 seconds
->
+o) 'class::connectfreq' now works properly with values lower than 300 seconds
+o) Implemented IRCv3.1 account-notify extension
-<
+o) The general::oper_pass_resv configuration directive has been deprecated
->
+o) The 'general::oper_pass_resv' configuration directive has been deprecated
+   in favor of the new 'join:resv', and 'nick:resv' irc-operator flags.
+   See doc/reference.conf for more information.
+o) Added 'resv', and 'unresv' irc-operator flags. Previously, all
+-- Noteworthy changes in version 8.2.8 (2015-05-10)
+o) ircd now rejects remote k-line requests for user@host mask that don't
-<
+   have at least general::min_nonwildcard non-wildcard characters in it
->
+   have at least 'general::min_nonwildcard' non-wildcard characters in it
+o) Configuration related server notices are now sent to admins only as
+   they potentially could leak passwords and other sensitive data to irc
+   operators that don't have administrator privileges
+o) Fixed bug where a REHASH would clear all X-Lines and RESVs that have
+   been set with the XLINE/RESV commands
+o) Fixed broken temporary remote XLINEs
-<
+o) The general::havent_read_conf configuration directive has been removed
->
+o) The 'general::havent_read_conf' configuration directive has been removed
+o) Various code cleanups
+-- Noteworthy changes in version 8.2.4 (2015-02-17)
+o) Added SVSTAG command which services may use to add tags to users which can
+   be seen in /whois
-<
+o) Added oper::whois configuration option which allows to override the default
->
+o) Added 'oper::whois' configuration option which allows to override the default
+   RPL_WHOISOPERATOR numeric string shown in /whois.
+o) IRC operators may now use +O on a channel even if they are only a half-op
+o) Fixed bug where TOPIC messages were not n!u@h prefixed in case of TBURST
+o) Added channel mode +C which prevents users from sending CTCPs to a channel
+o) Fixes to the NOTICE/PRIVMSG anti-flood logic
+o) Allow to disable the NOTICE/PRIVMSG anti-flood mechanism by setting the
-<
+   general::default_floodcount configuration option to 0
->
+   'general::default_floodcount' configuration option to 0
+o) Updated some help files
+o) Minor code cleanups and improvements
+o) Operators may now see certificate fingerprints, user modes and hidden
+o) m_opme.c has been added to modules/extra. Can be used on opless channels only.
+o) Added 'opme' to irc-operator flags
+o) Updated several help files
-<
+o) The general::hide_spoof_ips configuration option has been deprecated
-<
+o) The general::true_no_oper_flood configuration option has been deprecated.
->
+o) The 'general::hide_spoof_ips' configuration option has been deprecated
->
+o) The 'general::true_no_oper_flood' configuration option has been deprecated.
+   Operators still can have higher 'flood' limits with no_oper_flood = yes;
+   hoewever, they are no longer allowed to bypass RecvQ limits.
-<
+o) Added general::stats_m_oper_only configuration option
->
+o) Added 'general::stats_m_oper_only' configuration option
+o) Remote client connection notices (user mode +F) now do show IP addresses, too
+   or channels that are set +c (no control codes)
+o) pseudo {} blocks also known as service aliases have been implemented.
+   See doc/reference.conf for more information.
-<
+o) Removed general::services_name configuration option. This is now no longer needed.
->
+o) Removed 'general::services_name' configuration option. This is now no
->
+   longer needed.
+-- Noteworthy changes in version 8.2.0rc2 (2014-08-03)
+-- Noteworthy changes in version 8.2.0beta4 (2014-07-06)
-<
+o) Channel halfops are now an integral part of ircd-hybrid
->
+#####################################################################
->
+o) IMPORTANT: channel halfops are now an integral part of ircd-hybrid
+   and can't be disabled anymore
-+
+#####################################################################
+o) Many code cleanups and improvements
+o) Added flood control for the INVITE command. See channel {} block in reference.conf
+o) Changed flood control logic for the KNOCK command. See channel {} block in reference.conf
+o) Added 'ssl_message_digest_algorithm' configuration option to serverinfo {} block.
+   See doc/reference.conf for more information.
+o) Added support for Elliptic Curve Diffie-Hellman (ECDH). Also an elliptic curve can be
-<
+   specified via the serverinfo::ssl_dh_elliptic_curve configuration option.
->
+   specified via the 'serverinfo::ssl_dh_elliptic_curve' configuration option.
+o) Removed 'ssl_server_method' and 'ssl_client_method' configuration options.
+   ircd now only allows TLSv1, TLSv1.1 and TLSv1.2 protocols depending
+   on the OpenSSL version. SSLv3 is no longer supported.
+-- Noteworthy changes in version 8.2.0beta2 (2014-05-15)
-<
+########################################################################
-<
+o) IMPORTANT: renamed general::warn_no_nline configuration directive to
-<
+   general::warn_no_connect_block
-<
+########################################################################
->
+#########################################################################
->
+o) IMPORTANT: renamed 'general::warn_no_nline' configuration directive to
->
+   'general::warn_no_connect_block'
->
+#########################################################################
+o) Fixed bug with WHOIS not showing a list of channel names as expected
+o) Added usermode +q which hides idle and signon time in WHOIS
+o) Added usermode +p which hides channel list in WHOIS
+o) Channel halfops (%) may now no longer KICK other channel halfops
+o) Fixed compile warnings; code cleanups
+o) Fixed bug where the configuration parser wouldn't truncate the network name
-<
+   if general::network_name contains spaces
->
+   if 'general::network_name' contains spaces
+-- Noteworthy changes in version 8.1.17 (2014-05-01)
+-- Noteworthy changes in version 8.1.14 (2014-02-25)
-<
+o) WHOWAS now honors serverhide::disable_remote_commands
->
+o) WHOWAS now honors 'serverhide::disable_remote_commands'
+o) Improved TS6 inter-server communication
+o) Minor code cleanups and speed enhancements
+o) Added 'unxline' oper flag
+   with NickServ. ('r' status flag)
+o) Fixed some flaws with server hiding
+o) Fixed bug where "STATS P" would leak ip addresses to remotely connected
-<
+   administrators, even if serverhide::hide_server_ips was set to 'yes'
->
+   administrators, even if 'serverhide::hide_server_ips' was set to 'yes'
+o) Added SVSKILL command
+-- Noteworthy changes in version 8.1.5 (2013-07-16)
+o) Fixed bug that would prevent servers from linking together
-<
+   if connect::aftype isn't set
->
+   if 'connect::aftype' isn't set
+-- Noteworthy changes in version 8.1.4 (2013-07-05)
+o) Added 'xline' and 'resv' logging types. See doc/reference.conf
+   for more information
+o) Fixed bug where remote STATS requests were not rate limited
-<
+o) Fixed core with empty auth::spoof entries
->
+o) Fixed core with empty 'auth::spoof' entries
+o) Increased oper/auth/connect password length limit from 20 to 128
+o) Minor fixes to nickflood control code
+-- Noteworthy changes in version 8.1.2 (2013-06-20)
-<
+o) Added general::cycle_on_host_change configuration option
-<
+o) Added general::stats_u_oper_only configuration option
->
+o) Added 'general::cycle_on_host_change' configuration option
->
+o) Added 'general::stats_u_oper_only' configuration option
+o) Added support for SHA-256 ssl certificate fingerprint based operator {}
+   and connect {} blocks.
+   In conjunction with Anope 1.9/2.0 IRC-services, clients are now also able
+   to automatically identify for their nick with ssl certificate
+   fingerprints
-<
+o) Added operator::ssl_connection_required configuration option. See
->
+o) Added 'operator::ssl_connection_required' configuration option. See
+   doc/reference.conf for more information
+o) Added usermode +S (client is connected via SSL/TLS). Allows services
+   to keep track of what users are connected via SSL, and allows to see
+o) Implemented channel mode +M. Clients that haven't identified their
+   name with NickServ may not speak in a channel that has this mode set
+o) Fixed weird idletimes shown in /trace
-<
+o) Added 'nononreg' (+R) to general::oper_umodes
->
+o) Added 'nononreg' (+R) to 'general::oper_umodes'
+o) Added user mode +F (can see remote client connect/exit notices)
+-- Noteworthy changes in version 8.1.0beta3 (2013-05-05)
+o) PCRE support has been dropped
+o) "STATS o" now shows how many times an operator {} block has been used.
-<
+   Similar to STATS x|q"
->
+   Similar to "STATS x|q"
+o) Implemented channel mode +c. Known from other ircds, this mode basically
+   prevents users from sending messages including control codes to a channel
+   that has this mode set
+o) Fixed bug where bans were not checked against non-channel members when
+   sending messages to a channel
-<
+o) Removed channel::quiet_on_ban configuration option. This feature is
->
+o) Removed 'channel::quiet_on_ban' configuration option. This feature is
+   now enabled by default
+-- Noteworthy changes in version 8.1.0beta1 (2013-04-25)
-<
+########################################################################
->
+#######################################################################
+o) IMPORTANT: name/channel entries can't be stacked any longer within a
+   single resv {} block. Each entry now requires its own resv {} block.
+   Read doc/reference.conf for more details
+#######################################################################
-<
+o) Added resv::exempt configuration option. Exempt can be either a
->
+o) Added 'resv::exempt' configuration option. Exempt can be either a
+   ISO 3166 alpha-2 two letter country code, or a nick!user@host mask.
+   CIDR is supported
-<
+o) Removed channel::restrict_channels configuration option
->
+o) Removed 'channel::restrict_channels' configuration option
+o) Preliminary libGeoIP support. Currently only used for exempt entries
+   in resv {} blocks
-<
+o) Improved WEBIRC authentication; added 'webirc' to auth::flags.
->
+o) Improved WEBIRC authentication; added 'webirc' to 'auth::flags'.
+   A "webirc." spoof is now no longer required
+o) Implemented new memory pool allocator which basically is based upon Tor's
+   mempool allocator for Tor cells
+o) Channel based resv {} blocks may now contain wildcards
+o) NICK/JOIN now shows the actual reason of reserved nick-/channelnames
+o) contrib/ and its content has been enirely removed from the tree
-<
+o) Added serverhide::hide_services configuration option
-<
+o) Added 'nononreg' (+R) to oper::umodes and general::oper_only_modes
->
+o) Added 'serverhide::hide_services' configuration option
->
+o) Added 'nononreg' (+R) to 'oper::umodes' and 'general::oper_only_modes'
+o) Implemented IRCv3.1 away-notify extension
+-- Noteworthy changes in version 8.0.9 (2013-05-16)
+o) Fixed bug where ircd would sometimes drop a services link because
-<
+   of a missing argument to the SVSMODE command
->
+   of a missing argument to the "SVSMODE" command
+o) Fixed weird idletimes shown in /trace
+   and 'stats_e_disabled'
+o) m_webirc.c is now officially supported, and has been moved from contrib/
+   to modules/
-<
+o) /whois, /stats p, and /trace may now show fake idle times depending on
-<
+   how the new class::min_idle and class::max_idle configuration directives
-<
+   have been configured. This feature basically works in the same
-<
+   way as it does in csircd
->
+o) /whois, /stats p, and /trace may now show fake idle times depending
->
+   on how the new 'class::min_idle' and class::max_idle configuration
->
+   directives have been configured. This feature basically works in the
->
+   same way as it does in csircd
+o) The configuration parser now does support 'year' and 'month' units
+-- Noteworthy changes in version 8.0.0 (2012-10-18)
+o) Fixed an off-by-one with spoofs. Spoofs are now also checked for
+   invalid characters
-<
+o) Removed general::use_whois_actually configuration directive. This is
-<
+   now enabled by default
->
+o) Removed 'general::use_whois_actually' configuration directive.
->
+   This is now enabled by default
+o) Minor SQUIT handling fixes
+o) Fixed bancache not being updated on CHGHOST/CHGIDENT
+-- Noteworthy changes in version 8.0.0rc1 (2012-09-28)
-<
+o) Removed general::client_flood configuration option and added the
->
+o) Removed 'general::client_flood' configuration option and added the
+   new 'recvq' configuration directive to class {} blocks.
+   The max size of a receive queue can be seen in "STATS Y"
+   for each class
+o) Removed &localchannels
+o) PRIVMSG to opers@some.server is no longer supported
+o) Fixed bug that could lead to topic desynchronization
-<
+o) Removed serverhide::disable_hidden configuration option
->
+o) Removed 'serverhide::disable_hidden' configuration option
+o) Dropped ircd-hybrid-6 GLINE compatibility mode
+o) Removed use_invex, use_except and use_knock configuration options.
+   These features are now enabled by default
+-- Noteworthy changes in version 8.0.0beta2 (2012-07-21)
-<
+o) channel::disable_fake_channels now also disables ascii 29 (mIRC italic)
->
+o) 'channel::disable_fake_channels' now also disables ascii 29 (mIRC italic)
+   when set to yes
-<
+o) Added channel::max_chans_per_oper configuration directive. The old way
->
+o) Added 'channel::max_chans_per_oper' configuration directive. The old way
+   was to let operators join three times the amount of max_chans_per_user
+o) Replaced MODLOAD, MODUNLOAD, MODRELOAD, MODLIST and MODRESTART commands
+   with the new MODULE command which can be fed with the LOAD, UNLOAD, RELOAD
+   these flags control
+o) Removed Idle-time klines
+o) Cleaned up modules API. Old modules won't work anymore
-<
+o) Removed general::burst_away configuration directive. AWAY bursts are now
-<
+   controlled via connect::flags explicitly
->
+o) Removed 'general::burst_away' configuration directive. AWAY bursts are now
->
+   controlled via 'connect::flags' explicitly
+o) Introduced new logging subsystem including log rotation based on
+   file sizes. Log timestamp format is ISO8601 now
+o) Added support for remote D-lines
+   added 'ssl_client_method' and 'ssl_server_method' instead.
+   Both of these options can now be changed at runtime
+o) Oper login IDs are no longer limited to NICKLEN*2
-<
+o) Removed channel::burst_topicwho configuration option. Topicsetters are
-<
+   now sent by default
->
+o) Removed 'channel::burst_topicwho' configuration option. This feature is now
->
+   enabled by default
+o) "STATS Y|y" now reports CIDR limits as well
+o) Added m_webirc.c to contrib/
+o) Overall code cleanup and speed improvements

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines (old)
->
+Changed lines (new)

Comparing ircd-hybrid/trunk/NEWS (file contents): Revision 6539 by michael, Sun Sep 13 16:07:44 2015 UTC vs. Revision 7366 by michael, Wed Feb 24 12:40:19 2016 UTC

Diff Legend

Comparing ircd-hybrid/trunk/NEWS (file contents):
Revision 6539 by michael, Sun Sep 13 16:07:44 2015 UTC vs.
Revision 7366 by michael, Wed Feb 24 12:40:19 2016 UTC