| 1 |
-- Noteworthy changes in version 8.2.12 (2016-01-05) |
| 2 |
####################################################################### |
| 3 |
o) IMPORTANT: Character case mapping is 'ascii' now. It is recommended |
| 4 |
to update all servers on the network to prevent possible channel |
| 5 |
desynchronizations and nick name collision kills |
| 6 |
####################################################################### |
| 7 |
o) Added channel mode +T which forbids NOTICEs to be sent to a channel |
| 8 |
o) Fixed minor SVSTAG memory leak |
| 9 |
o) Fixed broken PART message blocking mechanism |
| 10 |
o) ircd now makes use of up to 8 name servers that are specified in |
| 11 |
/etc/resolv.conf |
| 12 |
o) The -klinefile, -dlinefile, etc. switches didn't work at all |
| 13 |
o) Fixed possible core on ident lookups if ircd is out of file descriptors |
| 14 |
o) Far client exit notices (+F) now show IP addresses, too |
| 15 |
o) Made idle time look nicer in "STATS v|p" by using a formatted time string |
| 16 |
o) 'general::ts_warn_delta', and 'general::ts_max_delta' can be set to 0 now |
| 17 |
o) Several code cleanups and optimizations. Improved documentation |
| 18 |
|
| 19 |
|
| 20 |
-- Noteworthy changes in version 8.2.11 (2015-11-19) |
| 21 |
o) Implemented IRCv3.2 invite-notify extension |
| 22 |
o) Implemented IRCv3.2 chghost extension |
| 23 |
o) Added channel::invite_delay_channel configuration option |
| 24 |
|
| 25 |
|
| 26 |
-- Noteworthy changes in version 8.2.10 (2015-11-06) |
| 27 |
####################################################################### |
| 28 |
o) IMPORTANT: renamed 'serverhide::links_delay' configuration directive |
| 29 |
to 'serverhide::flatten_links_delay' |
| 30 |
####################################################################### |
| 31 |
o) Added 'serverhide::flatten_links_file' configuration option |
| 32 |
o) Fixed bug where changing 'serverhide::flatten_links_delay' on runtime |
| 33 |
would not have any effect |
| 34 |
o) mkpasswd (tools): fixed broken bcrypt support on *BSD in conjunction |
| 35 |
with the -s and -l switches. Dropped MD5, DES and Extended DES support. |
| 36 |
o) Removed CHALLENGE in favor of ssl certificate fingerprint enabled |
| 37 |
operator {} blocks |
| 38 |
o) RSA keys with less than 2048 bits are no longer supported; same applies |
| 39 |
to the DH param file |
| 40 |
o) Added missing irc-operator privilege flags to /stats o. For a full list |
| 41 |
of flags see doc/reference.conf |
| 42 |
|
| 43 |
|
| 44 |
-- Noteworthy changes in version 8.2.9 (2015-09-13) |
| 45 |
######################################################################## |
| 46 |
o) IMPORTANT: database files and links.txt are now stored in /var/lib |
| 47 |
instead of /etc, so make sure to move your k/d/x-line database files |
| 48 |
to the new path before (re)starting the ircd |
| 49 |
######################################################################## |
| 50 |
o) IMPORTANT: the splitmode logic has been removed along with the |
| 51 |
following channel {} block configuration directives: |
| 52 |
'default_split_user_count', 'default_split_server_count', |
| 53 |
'no_create_on_split', 'no_join_on_split' |
| 54 |
######################################################################## |
| 55 |
o) Added 'xline_exempt' to auth {} block flags |
| 56 |
o) 'serverinfo::sid' is now optional. A unique SID is now automatically |
| 57 |
generated based on the server's name and description |
| 58 |
o) Various fixes to the mkpasswd tool |
| 59 |
o) If supported by the compiler, ircd-hybrid now compiles with |
| 60 |
'-fstack-protector-strong' instead of '-fstack-protector' |
| 61 |
o) Services can now add RESVs (SQLINEs) that have wildcards in it |
| 62 |
o) Channel name RESVs are now sanity checked for too broad masks |
| 63 |
o) 'class::connectfreq' now works properly with values lower than 300 seconds |
| 64 |
o) Implemented IRCv3.1 account-notify extension |
| 65 |
o) The 'general::oper_pass_resv' configuration directive has been deprecated |
| 66 |
in favor of the new 'join:resv', and 'nick:resv' irc-operator flags. |
| 67 |
See doc/reference.conf for more information. |
| 68 |
o) Added 'resv', and 'unresv' irc-operator flags. Previously, all |
| 69 |
irc-operators were allowed to RESV and UNRESV, regardless of configured |
| 70 |
privileges. |
| 71 |
o) Added 'close' to irc-operator flags |
| 72 |
o) ircd is using ISO 8601 date and time notation in most places now |
| 73 |
|
| 74 |
|
| 75 |
-- Noteworthy changes in version 8.2.8 (2015-05-10) |
| 76 |
o) ircd now rejects remote k-line requests for user@host mask that don't |
| 77 |
have at least 'general::min_nonwildcard' non-wildcard characters in it |
| 78 |
o) Configuration related server notices are now sent to admins only as |
| 79 |
they potentially could leak passwords and other sensitive data to irc |
| 80 |
operators that don't have administrator privileges |
| 81 |
o) The GLINE/GUNGLINE commands have been removed. KLINE in conjunction |
| 82 |
with cluster {} and/or shared {} blocks is now the recommended |
| 83 |
way to add global user@host mask based server bans |
| 84 |
o) Added dline_min_cidr, dline_min_cidr6, kline_min_cidr, and kline_min_cidr6 |
| 85 |
configuration options to the general {} block |
| 86 |
o) Fixed bug where a REHASH would clear all X-Lines and RESVs that have |
| 87 |
been set with the XLINE/RESV commands |
| 88 |
o) Fixed broken temporary remote XLINEs |
| 89 |
o) The 'general::havent_read_conf' configuration directive has been removed |
| 90 |
o) Various code cleanups |
| 91 |
|
| 92 |
|
| 93 |
-- Noteworthy changes in version 8.2.7 (2015-04-05) |
| 94 |
o) Fixed a potential buffer overflow with the BMASK inter-server command |
| 95 |
o) Fixed undefined behavior in the HELP command module which could |
| 96 |
lead to stack corruption |
| 97 |
o) Removed useless help files for inter-server commands |
| 98 |
|
| 99 |
|
| 100 |
-- Noteworthy changes in version 8.2.6 (2015-03-29) |
| 101 |
o) INFO now shows configured values of 'max_watch' and 'stats_m_oper_only' |
| 102 |
o) WHOWAS now shows IP addresses to irc operators |
| 103 |
o) Fixed bug that would allow remote clients to bypass the hard |
| 104 |
limit of max WHOWAS entries to be returned |
| 105 |
o) Code cleanups and performance improvements |
| 106 |
|
| 107 |
|
| 108 |
-- Noteworthy changes in version 8.2.5 (2015-02-24) |
| 109 |
o) Fixed core on Mac OSX 10.10 and possibly some other systems when parsing |
| 110 |
the ircd.conf with configured pseudo {} blocks |
| 111 |
|
| 112 |
|
| 113 |
-- Noteworthy changes in version 8.2.4 (2015-02-17) |
| 114 |
o) Added SVSTAG command which services may use to add tags to users which can |
| 115 |
be seen in /whois |
| 116 |
o) Added 'oper::whois' configuration option which allows to override the default |
| 117 |
RPL_WHOISOPERATOR numeric string shown in /whois. |
| 118 |
o) IRC operators may now use +O on a channel even if they are only a half-op |
| 119 |
o) Fixed bug where TOPIC messages were not n!u@h prefixed in case of TBURST |
| 120 |
issued by services clients |
| 121 |
|
| 122 |
|
| 123 |
-- Noteworthy changes in version 8.2.3 (2015-02-11) |
| 124 |
######################################################################## |
| 125 |
o) IMPORTANT: the following ircd.conf configuration directives have been renamed: |
| 126 |
|
| 127 |
max_clients -> default_max_clients |
| 128 |
join_flood_count -> default_join_flood_count |
| 129 |
join_flood_time -> default_join_flood_time |
| 130 |
######################################################################## |
| 131 |
o) Fixed bug where "/rehash" would always reset the "MAX", "JFLOODTIME", and |
| 132 |
"JFLOODCOUNT" values that have been changed from within IRC via the "/set" |
| 133 |
command |
| 134 |
o) Added channel mode +C which prevents users from sending CTCPs to a channel |
| 135 |
o) Fixes to the NOTICE/PRIVMSG anti-flood logic |
| 136 |
o) Allow to disable the NOTICE/PRIVMSG anti-flood mechanism by setting the |
| 137 |
'general::default_floodcount' configuration option to 0 |
| 138 |
o) Updated some help files |
| 139 |
o) Minor code cleanups and improvements |
| 140 |
o) Operators may now see certificate fingerprints, user modes and hidden |
| 141 |
channels via WHOIS as well. This used to be admin only. |
| 142 |
|
| 143 |
|
| 144 |
-- Noteworthy changes in version 8.2.2 (2015-01-20) |
| 145 |
o) Implemented IRCv3.1 extended-join extension |
| 146 |
o) Channel half-ops can now use INVITE as well |
| 147 |
o) Fixed broken 'make install -jX' |
| 148 |
o) m_opme.c has been added to modules/extra. Can be used on opless channels only. |
| 149 |
o) Added 'opme' to irc-operator flags |
| 150 |
o) Updated several help files |
| 151 |
o) The 'general::hide_spoof_ips' configuration option has been deprecated |
| 152 |
o) The 'general::true_no_oper_flood' configuration option has been deprecated. |
| 153 |
Operators still can have higher 'flood' limits with no_oper_flood = yes; |
| 154 |
hoewever, they are no longer allowed to bypass RecvQ limits. |
| 155 |
o) Added 'general::stats_m_oper_only' configuration option |
| 156 |
o) Remote client connection notices (user mode +F) now do show IP addresses, too |
| 157 |
|
| 158 |
|
| 159 |
-- Noteworthy changes in version 8.2.1 (2014-10-21) |
| 160 |
o) Fixed bug where "UNDLINE remote.server IP" did not work as expected |
| 161 |
o) Servers are now allowed to add/remove K-/D-/X-lines and RESVs |
| 162 |
o) Usermode +G now no longer allows to override +g |
| 163 |
o) Due to potential weakness, TLS session caching and session tickets |
| 164 |
have been disabled |
| 165 |
o) Minor improvements to TS6 implementation |
| 166 |
o) WHOWAS now shows the name of the services account a user was logged in |
| 167 |
|
| 168 |
|
| 169 |
-- Noteworthy changes in version 8.2.0 (2014-08-24) |
| 170 |
o) Successful operator logins are now announced globally via GLOBOPS |
| 171 |
o) Cleanups and improvements to the resolver code |
| 172 |
o) Cleanups and improvements to the poll() I/O event notification support |
| 173 |
o) A topic mask can now be specified within the LIST options |
| 174 |
o) All users may now see channel modes in the /list reply |
| 175 |
o) Fixed bug where "NOTICE +#somechan" did allow bypassing resv {} channels, |
| 176 |
or channels that are set +c (no control codes) |
| 177 |
o) pseudo {} blocks also known as service aliases have been implemented. |
| 178 |
See doc/reference.conf for more information. |
| 179 |
o) Removed 'general::services_name' configuration option. This is now no |
| 180 |
longer needed. |
| 181 |
|
| 182 |
|
| 183 |
-- Noteworthy changes in version 8.2.0rc2 (2014-08-03) |
| 184 |
o) Improved AWAY throttling to allow for better fine-tuning. See the |
| 185 |
newly added 'away_count' and 'away_time' configuration directives |
| 186 |
in the general {} block |
| 187 |
o) Support for the select() I/O event notification has been dropped |
| 188 |
o) Minor code cleanups and improvements |
| 189 |
|
| 190 |
|
| 191 |
-- Noteworthy changes in version 8.2.0rc1 (2014-07-20) |
| 192 |
o) Miscellaneous code cleanups and stabilization fixes |
| 193 |
o) ./configure now requires OpenSSL 0.9.8o or above in order |
| 194 |
to enable TLS/SSL support |
| 195 |
|
| 196 |
|
| 197 |
-- Noteworthy changes in version 8.2.0beta4 (2014-07-06) |
| 198 |
##################################################################### |
| 199 |
o) IMPORTANT: channel halfops are now an integral part of ircd-hybrid |
| 200 |
and can't be disabled anymore |
| 201 |
##################################################################### |
| 202 |
o) Many code cleanups and improvements |
| 203 |
o) Added flood control for the INVITE command. See channel {} block in reference.conf |
| 204 |
o) Changed flood control logic for the KNOCK command. See channel {} block in reference.conf |
| 205 |
o) INVITE without any parameters now shows a list of channels a client is invited to |
| 206 |
o) The OPERWALL command has been removed. Use GLOBOPS instead |
| 207 |
o) Added 'max_channels' to class {} blocks |
| 208 |
o) Added 'throttle_count' configuration option to the general {} block |
| 209 |
o) Added 'ssl_message_digest_algorithm' configuration option to serverinfo {} block. |
| 210 |
See doc/reference.conf for more information. |
| 211 |
o) Added support for Elliptic Curve Diffie-Hellman (ECDH). Also an elliptic curve can be |
| 212 |
specified via the 'serverinfo::ssl_dh_elliptic_curve' configuration option. |
| 213 |
o) Removed 'ssl_server_method' and 'ssl_client_method' configuration options. |
| 214 |
ircd now only allows TLSv1, TLSv1.1 and TLSv1.2 protocols depending |
| 215 |
on the OpenSSL version. SSLv3 is no longer supported. |
| 216 |
|
| 217 |
|
| 218 |
-- Noteworthy changes in version 8.2.0beta3 (2014-05-26) |
| 219 |
o) Code cleanups/performance improvements |
| 220 |
|
| 221 |
|
| 222 |
-- Noteworthy changes in version 8.2.0beta2 (2014-05-15) |
| 223 |
######################################################################### |
| 224 |
o) IMPORTANT: renamed 'general::warn_no_nline' configuration directive to |
| 225 |
'general::warn_no_connect_block' |
| 226 |
######################################################################### |
| 227 |
o) Fixed bug with WHOIS not showing a list of channel names as expected |
| 228 |
o) Added usermode +q which hides idle and signon time in WHOIS |
| 229 |
o) Added usermode +p which hides channel list in WHOIS |
| 230 |
|
| 231 |
|
| 232 |
-- Noteworthy changes in version 8.2.0beta1 (2014-04-29) |
| 233 |
o) TS6 is now mandatory. ircd is no longer backwards compatible with TS5 |
| 234 |
and below. |
| 235 |
o) SVSJOIN and SVSPART commands have been added |
| 236 |
o) Major code cleanups and refactoring. Improved overall performance |
| 237 |
o) INFO now also reports MPATH (path to main motd (Message of the Day) file) |
| 238 |
and SPATH (Path to server executable) |
| 239 |
o) Updated several help files |
| 240 |
|
| 241 |
|
| 242 |
-- Noteworthy changes in version 8.1.20 (2014-07-20) |
| 243 |
o) Fixed XLINE not working as expected |
| 244 |
o) Fixed build with LibreSSL which hasn't compression support |
| 245 |
o) Miscellaneous stabilization and cosmetical fixes |
| 246 |
o) EGD support has been dropped |
| 247 |
|
| 248 |
|
| 249 |
-- Noteworthy changes in version 8.1.19 (2014-07-05) |
| 250 |
o) Fixed EOB logic for remote servers |
| 251 |
o) Fixed bug where opers that have the +g/+G/+R umodes set won't receive server |
| 252 |
notices for remote CONNECT/KLINE/DLINE/XLINE/RESV attempts |
| 253 |
o) Sending messages to user@server to local targets is now no longer possible, |
| 254 |
as this was an easy way to bypass +R/+G/+g user modes. |
| 255 |
o) Fixed splicode logic so SPLITNUM now works as expected |
| 256 |
o) Fixed UNDLINE not to require the IP address to be prepended with *@ |
| 257 |
|
| 258 |
|
| 259 |
-- Noteworthy changes in version 8.1.18 (2014-06-09) |
| 260 |
o) Fixed CAP issue for certain clients |
| 261 |
o) Fixed bug where "STATS p" would show an invalid amount of irc-operators |
| 262 |
in case there are any +H opers |
| 263 |
o) irc-operators may now no longer set a channel +O if they are only halfops (%) |
| 264 |
o) Channel halfops (%) may now no longer (de)halfop other channel members |
| 265 |
o) Channel halfops (%) may now no longer KICK other channel halfops |
| 266 |
o) Fixed compile warnings; code cleanups |
| 267 |
o) Fixed bug where the configuration parser wouldn't truncate the network name |
| 268 |
if 'general::network_name' contains spaces |
| 269 |
|
| 270 |
|
| 271 |
-- Noteworthy changes in version 8.1.17 (2014-05-01) |
| 272 |
o) Fixed possible WATCH core |
| 273 |
o) Fixed bug where the configuration parser wouldn't take time units |
| 274 |
into consideration for the join_flood_time and throttle_time |
| 275 |
configuration options |
| 276 |
o) Minor LIST optimization |
| 277 |
|
| 278 |
|
| 279 |
-- Noteworthy changes in version 8.1.16 (2014-04-20) |
| 280 |
o) Fixed undefined behaviour with crypt() returning NULL |
| 281 |
since glibc2.17 in certain cases |
| 282 |
o) Admins may now see all channel members via "WHO #channel" |
| 283 |
regardless of channel mode +s |
| 284 |
o) Fixed corrupted "STATS U" output |
| 285 |
|
| 286 |
|
| 287 |
-- Noteworthy changes in version 8.1.15 (2014-03-29) |
| 288 |
######################################################################## |
| 289 |
o) IMPORTANT: ircd binary is now again placed into bin/ instead of sbin/ |
| 290 |
######################################################################## |
| 291 |
o) mkpasswd in tools/ now defaults to MD5 instead of DES |
| 292 |
o) The USERS command has been removed |
| 293 |
o) Fixed issue with SVSNICK where clients self-collided when changing |
| 294 |
just the case of the nick name, i.e. somenick -> SomeNicK |
| 295 |
o) Minor code cleanups and cosmetical fixes |
| 296 |
|
| 297 |
|
| 298 |
-- Noteworthy changes in version 8.1.14 (2014-02-25) |
| 299 |
o) WHOWAS now honors 'serverhide::disable_remote_commands' |
| 300 |
o) Improved TS6 inter-server communication |
| 301 |
o) Minor code cleanups and speed enhancements |
| 302 |
o) Added 'unxline' oper flag |
| 303 |
o) Implemented IRCv3.2 userhost-in-names extension |
| 304 |
o) ircd now allows private RSA keys larger than 2048 bits |
| 305 |
o) Fixed bug where signals stopped from working after restarting |
| 306 |
the ircd via SIGINT |
| 307 |
o) Fixed bug where certain irc clients could not reconnect via TLS/SSL |
| 308 |
o) Fixed long-standing bug where +p channels have been shown |
| 309 |
in the WHOIS reply |
| 310 |
|
| 311 |
|
| 312 |
-- Noteworthy changes in version 8.1.13 (2014-01-07) |
| 313 |
o) Fixed EOB not working for remote servers (resulted in fake direction notices) |
| 314 |
o) Fixed remote client connection notices for servers that are |
| 315 |
more than one hop away |
| 316 |
o) Fixed bug where the ircd didn't timeout SSL connections that |
| 317 |
haven't finished the SSL handshake |
| 318 |
o) Fixed several bugs with server hiding |
| 319 |
o) Updated/fixed help files |
| 320 |
o) WHOIS no longer sends a notice to +y operators |
| 321 |
|
| 322 |
|
| 323 |
-- Noteworthy changes in version 8.1.12 (2013-12-22) |
| 324 |
o) RPL_WHOISMODES now uses the 379 numeric |
| 325 |
o) Serial number is now shown on start up |
| 326 |
o) Fixed possible channel mode desynch with services |
| 327 |
o) Fixed TS6 support with LOCOPS |
| 328 |
o) Minor code cleanups |
| 329 |
o) Fixed file descriptor leak with empty help files |
| 330 |
o) Fixed issue with WEBIRC where hostnames were not validated |
| 331 |
|
| 332 |
|
| 333 |
-- Noteworthy changes in version 8.1.11 (2013-12-06) |
| 334 |
o) Administrators may now see channel modes in LIST |
| 335 |
o) Fixed compile error on BSD systems when building with kqueue() |
| 336 |
|
| 337 |
|
| 338 |
-- Noteworthy changes in version 8.1.10 (2013-11-25) |
| 339 |
o) Fixed bug with kqueue() where it occasionally dropped updates |
| 340 |
o) Changed WHOIS to show certificate fingerprint to administrators only |
| 341 |
o) The WHO reply now shows if a nickname has been registered |
| 342 |
with NickServ. ('r' status flag) |
| 343 |
o) Fixed some flaws with server hiding |
| 344 |
o) Fixed bug where "STATS P" would leak ip addresses to remotely connected |
| 345 |
administrators, even if 'serverhide::hide_server_ips' was set to 'yes' |
| 346 |
o) Added SVSKILL command |
| 347 |
|
| 348 |
|
| 349 |
-- Noteworthy changes in version 8.1.9 (2013-11-08) |
| 350 |
o) Added usermode +W. Users connected via a webirc gateway get this |
| 351 |
mode set by servers. |
| 352 |
o) WHOIS now shows if a client is connected via a webirc gateway |
| 353 |
o) Administrators may now see +s channels a user is in with WHOIS. |
| 354 |
Secret channels are prepended with a tilde in the WHOIS reply. |
| 355 |
o) Administrators are now able to see all the user modes a user has |
| 356 |
set via WHOIS |
| 357 |
|
| 358 |
|
| 359 |
-- Noteworthy changes in version 8.1.8 (2013-10-25) |
| 360 |
o) Fixed bug that could lead to a desynchronized nick database |
| 361 |
throughout the entire network if using services enforced |
| 362 |
nick names (SVSNICK) |
| 363 |
o) Cleaned up/modernized build system |
| 364 |
o) Add -fstack-protector to CFLAGS if available. Basically checks for |
| 365 |
buffer overflows/stack-smashing attacks |
| 366 |
o) When using anope 1.9/2.0 services, WHOIS now shows the account name |
| 367 |
of a registered/identified client (numeric 330) |
| 368 |
o) Administrators can now see +s channels in the LIST reply |
| 369 |
|
| 370 |
|
| 371 |
-- Noteworthy changes in version 8.1.7 (2013-08-18) |
| 372 |
o) Fixed issue with channel mode +n having no functionality at all |
| 373 |
o) Fixed SSL certificate fingerprint validation for outgoing server connects |
| 374 |
o) Updated several documentation files |
| 375 |
|
| 376 |
|
| 377 |
-- Noteworthy changes in version 8.1.6 (2013-08-02) |
| 378 |
o) Fixed possible core with empty motd files |
| 379 |
|
| 380 |
|
| 381 |
-- Noteworthy changes in version 8.1.5 (2013-07-16) |
| 382 |
o) Fixed bug that would prevent servers from linking together |
| 383 |
if 'connect::aftype' isn't set |
| 384 |
|
| 385 |
|
| 386 |
-- Noteworthy changes in version 8.1.4 (2013-07-05) |
| 387 |
o) Added 'xline' and 'resv' logging types. See doc/reference.conf |
| 388 |
for more information |
| 389 |
o) Fixed bug where remote STATS requests were not rate limited |
| 390 |
o) Fixed core with empty 'auth::spoof' entries |
| 391 |
o) Increased oper/auth/connect password length limit from 20 to 128 |
| 392 |
o) Minor fixes to nickflood control code |
| 393 |
|
| 394 |
|
| 395 |
-- Noteworthy changes in version 8.1.3 (2013-06-23) |
| 396 |
o) Fixed possible core on "STATS z" |
| 397 |
o) Revised doc/reference.conf |
| 398 |
o) Fixed broken --disable-libgeoip switch |
| 399 |
|
| 400 |
|
| 401 |
-- Noteworthy changes in version 8.1.2 (2013-06-20) |
| 402 |
o) Added 'general::cycle_on_host_change' configuration option |
| 403 |
o) Added 'general::stats_u_oper_only' configuration option |
| 404 |
o) Added support for SHA-256 ssl certificate fingerprint based operator {} |
| 405 |
and connect {} blocks. |
| 406 |
In conjunction with Anope 1.9/2.0 IRC-services, clients are now also able |
| 407 |
to automatically identify for their nick with ssl certificate |
| 408 |
fingerprints |
| 409 |
o) Added 'operator::ssl_connection_required' configuration option. See |
| 410 |
doc/reference.conf for more information |
| 411 |
o) Added usermode +S (client is connected via SSL/TLS). Allows services |
| 412 |
to keep track of what users are connected via SSL, and allows to see |
| 413 |
ssl-status of remote clients in a /whois |
| 414 |
o) Fixed a server name leak with server hiding enabled |
| 415 |
|
| 416 |
|
| 417 |
-- Noteworthy changes in version 8.1.1 (2013-06-06) |
| 418 |
######################################################################## |
| 419 |
o) IMPORTANT: moved disable_remote_command configuration directive from |
| 420 |
general {} block to serverhide {} block |
| 421 |
######################################################################## |
| 422 |
o) Minor code cleanups/performance improvements |
| 423 |
o) Fixed bug where opers could see LOCOPS messages even if they don't have |
| 424 |
the +l mode set |
| 425 |
o) Fixed bug where non-SSL clients could join +S channels on non-SSL servers |
| 426 |
o) Implemented motd {} configuration blocks. See doc/reference.conf for more |
| 427 |
information |
| 428 |
o) "STATS T" shows configured MOTD files |
| 429 |
|
| 430 |
|
| 431 |
-- Noteworthy changes in version 8.1.0 (2013-05-23) |
| 432 |
o) Minor code cleanups/performance improvements |
| 433 |
|
| 434 |
|
| 435 |
-- Noteworthy changes in version 8.1.0rc1 (2013-05-19) |
| 436 |
o) Fixed broken spoofs |
| 437 |
|
| 438 |
|
| 439 |
-- Noteworthy changes in version 8.1.0beta5 (2013-05-15) |
| 440 |
o) Removed 'remote', and 'global_kill' oper flags, and added 'connect', |
| 441 |
'squit', and 'kill' flags for better fine-tuning instead. Whether or |
| 442 |
not a specific action is allowed on a remote server can be controlled |
| 443 |
by appending the ':remote' flag. For example: 'kill' allows only local |
| 444 |
clients to be killed, whereas 'kill:remote' allows to issue a KILL for |
| 445 |
remote clients |
| 446 |
o) Added 'locops' and 'wallops' to irc-operator flags |
| 447 |
o) Improve/cleanup HELP system |
| 448 |
|
| 449 |
|
| 450 |
-- Noteworthy changes in version 8.1.0beta4 (2013-05-09) |
| 451 |
o) Implemented channel mode +M. Clients that haven't identified their |
| 452 |
name with NickServ may not speak in a channel that has this mode set |
| 453 |
o) Fixed weird idletimes shown in /trace |
| 454 |
o) Added 'nononreg' (+R) to 'general::oper_umodes' |
| 455 |
o) Added user mode +F (can see remote client connect/exit notices) |
| 456 |
|
| 457 |
|
| 458 |
-- Noteworthy changes in version 8.1.0beta3 (2013-05-05) |
| 459 |
o) PCRE support has been dropped |
| 460 |
o) "STATS o" now shows how many times an operator {} block has been used. |
| 461 |
Similar to "STATS x|q" |
| 462 |
o) Implemented channel mode +c. Known from other ircds, this mode basically |
| 463 |
prevents users from sending messages including control codes to a channel |
| 464 |
that has this mode set |
| 465 |
o) Fixed bug where bans were not checked against non-channel members when |
| 466 |
sending messages to a channel |
| 467 |
o) Removed 'channel::quiet_on_ban' configuration option. This feature is |
| 468 |
now enabled by default |
| 469 |
|
| 470 |
|
| 471 |
-- Noteworthy changes in version 8.1.0beta2 (2013-04-28) |
| 472 |
o) Fixed broken compile with libGeoIP disabled |
| 473 |
o) Code cleanups; working towards stabilization and improved performance |
| 474 |
o) Removed operflag 'nick_changes'. Operators can now set +n at will |
| 475 |
o) Fixed shared {} blocks not working as expected |
| 476 |
o) Fixed spoofs not working as expected |
| 477 |
|
| 478 |
|
| 479 |
-- Noteworthy changes in version 8.1.0beta1 (2013-04-25) |
| 480 |
####################################################################### |
| 481 |
o) IMPORTANT: name/channel entries can't be stacked any longer within a |
| 482 |
single resv {} block. Each entry now requires its own resv {} block. |
| 483 |
Read doc/reference.conf for more details |
| 484 |
####################################################################### |
| 485 |
o) Added 'resv::exempt' configuration option. Exempt can be either a |
| 486 |
ISO 3166 alpha-2 two letter country code, or a nick!user@host mask. |
| 487 |
CIDR is supported |
| 488 |
o) Removed 'channel::restrict_channels' configuration option |
| 489 |
o) Preliminary libGeoIP support. Currently only used for exempt entries |
| 490 |
in resv {} blocks |
| 491 |
o) Improved WEBIRC authentication; added 'webirc' to 'auth::flags'. |
| 492 |
A "webirc." spoof is now no longer required |
| 493 |
o) Implemented new memory pool allocator which basically is based upon Tor's |
| 494 |
mempool allocator for Tor cells |
| 495 |
o) Major code cleanups |
| 496 |
o) Implemented new binary database storage for X-, D-, K-, G-Lines and RESVs. |
| 497 |
Temporary bans are now stored as well and will persist after a reboot |
| 498 |
o) Channel based resv {} blocks may now contain wildcards |
| 499 |
o) NICK/JOIN now shows the actual reason of reserved nick-/channelnames |
| 500 |
o) contrib/ and its content has been enirely removed from the tree |
| 501 |
o) Added 'serverhide::hide_services' configuration option |
| 502 |
o) Added 'nononreg' (+R) to 'oper::umodes' and 'general::oper_only_modes' |
| 503 |
o) Implemented IRCv3.1 away-notify extension |
| 504 |
|
| 505 |
|
| 506 |
-- Noteworthy changes in version 8.0.9 (2013-05-16) |
| 507 |
o) Fixed bug where ircd would sometimes drop a services link because |
| 508 |
of a missing argument to the "SVSMODE" command |
| 509 |
o) Fixed weird idletimes shown in /trace |
| 510 |
|
| 511 |
|
| 512 |
-- Noteworthy changes in version 8.0.8 (2013-04-28) |
| 513 |
o) "STATS s" now shows configured services {} blocks as well |
| 514 |
o) Fixed compile warnings, minor code cleanups and optimizations |
| 515 |
o) Increased nickname history length to 32768 |
| 516 |
o) Unidentified/unregistered nicks may not speak in +R channels |
| 517 |
|
| 518 |
|
| 519 |
-- Noteworthy changes in version 8.0.7 (2013-04-12) |
| 520 |
o) Services may now set a channel topic without joining the channel first |
| 521 |
o) Fixed bug where WHOIS would send empty sockhost information on TS5 servers |
| 522 |
o) Remote server connection and split notices now go to new usermode +e. |
| 523 |
These previously used usermode +x. |
| 524 |
o) Services may now change the host of a specific user |
| 525 |
via "SVSMODE <timestamp> <target> +x <hostname>" |
| 526 |
|
| 527 |
|
| 528 |
-- Noteworthy changes in version 8.0.6 (2013-01-28) |
| 529 |
o) Fix bug where idle time sometimes is 0 even if the client didn't |
| 530 |
send any private message |
| 531 |
o) Fixed possible core in try_parse_v4_netmask() |
| 532 |
|
| 533 |
|
| 534 |
-- Noteworthy changes in version 8.0.5 (2013-01-24) |
| 535 |
######################################################################## |
| 536 |
o) IMPORTANT: nick and topic lengths are now configurable via ircd.conf. |
| 537 |
A max_nick_length, as well as a max_topic_length configuration option |
| 538 |
can now be found in the serverinfo {} block |
| 539 |
######################################################################## |
| 540 |
o) Fixed build on GNU/Hurd |
| 541 |
o) Fixed log files not getting reopened after /rehash |
| 542 |
o) Improved logging of configuration file issues |
| 543 |
o) ircd.pid has been accidentally saved in /var instead of /var/run |
| 544 |
o) Linux RT signal support for notification of socket events has been dropped |
| 545 |
o) Fixed "STATS Y|y" sometimes sending weird sendq/recvq values |
| 546 |
o) INFO now also shows configured values of 'disable_fake_channels', |
| 547 |
and 'stats_e_disabled' |
| 548 |
o) m_webirc.c is now officially supported, and has been moved from contrib/ |
| 549 |
to modules/ |
| 550 |
o) /whois, /stats p, and /trace may now show fake idle times depending |
| 551 |
on how the new 'class::min_idle' and class::max_idle configuration |
| 552 |
directives have been configured. This feature basically works in the |
| 553 |
same way as it does in csircd |
| 554 |
o) The configuration parser now does support 'year' and 'month' units |
| 555 |
|
| 556 |
|
| 557 |
-- Noteworthy changes in version 8.0.4 (2013-01-02) |
| 558 |
o) Fixed possible core on USERHOST/ISON with optimization enabled |
| 559 |
o) Fixed bug where 'can_flood' sometimes didn't work as expected |
| 560 |
|
| 561 |
|
| 562 |
-- Noteworthy changes in version 8.0.3 (2012-12-24) |
| 563 |
o) Fixed core on UNDLINE |
| 564 |
o) XLINE/KLINE/RESV/DLINE/SQUIT and KILL now have the same default reason |
| 565 |
if a reason hasn't been specified |
| 566 |
|
| 567 |
|
| 568 |
-- Noteworthy changes in version 8.0.2 (2012-12-20) |
| 569 |
o) Minor updates to the build system |
| 570 |
o) Fixed broken --enable-assert configure switch |
| 571 |
o) Fixed bug where timed events stopped from working if the system's |
| 572 |
clock is running backwards |
| 573 |
o) STATS q|Q now shows how many times a resv {} block has been matched |
| 574 |
o) Fixed contributed WEBIRC module |
| 575 |
o) IRC operators may now again see server generated nick rejection notices |
| 576 |
|
| 577 |
|
| 578 |
-- Noteworthy changes in version 8.0.1 (2012-11-04) |
| 579 |
o) Fixed broken CIDR support for CHALLENGE based irc operator logins |
| 580 |
o) Fixed class limits not properly applying to operator {} blocks |
| 581 |
o) Fixed possible TBURST desynchronization with services |
| 582 |
o) Fixed TBURST from leaking the server name if it's a hidden server |
| 583 |
|
| 584 |
|
| 585 |
-- Noteworthy changes in version 8.0.0 (2012-10-18) |
| 586 |
o) Fixed an off-by-one with spoofs. Spoofs are now also checked for |
| 587 |
invalid characters |
| 588 |
o) Removed 'general::use_whois_actually' configuration directive. |
| 589 |
This is now enabled by default |
| 590 |
o) Minor SQUIT handling fixes |
| 591 |
o) Fixed bancache not being updated on CHGHOST/CHGIDENT |
| 592 |
|
| 593 |
|
| 594 |
-- Noteworthy changes in version 8.0.0rc1 (2012-09-28) |
| 595 |
o) Removed 'general::client_flood' configuration option and added the |
| 596 |
new 'recvq' configuration directive to class {} blocks. |
| 597 |
The max size of a receive queue can be seen in "STATS Y" |
| 598 |
for each class |
| 599 |
o) Allow the '[' and ']' characters in server description |
| 600 |
|
| 601 |
|
| 602 |
-- Noteworthy changes in version 8.0.0beta3 (2012-08-24) |
| 603 |
o) Fixed wrong syntax in several language files |
| 604 |
o) Removed &localchannels |
| 605 |
o) PRIVMSG to opers@some.server is no longer supported |
| 606 |
o) Fixed bug that could lead to topic desynchronization |
| 607 |
o) Removed 'serverhide::disable_hidden' configuration option |
| 608 |
o) Dropped ircd-hybrid-6 GLINE compatibility mode |
| 609 |
o) Removed use_invex, use_except and use_knock configuration options. |
| 610 |
These features are now enabled by default |
| 611 |
|
| 612 |
|
| 613 |
-- Noteworthy changes in version 8.0.0beta2 (2012-07-21) |
| 614 |
o) 'channel::disable_fake_channels' now also disables ascii 29 (mIRC italic) |
| 615 |
when set to yes |
| 616 |
o) Added 'channel::max_chans_per_oper' configuration directive. The old way |
| 617 |
was to let operators join three times the amount of max_chans_per_user |
| 618 |
o) Replaced MODLOAD, MODUNLOAD, MODRELOAD, MODLIST and MODRESTART commands |
| 619 |
with the new MODULE command which can be fed with the LOAD, UNLOAD, RELOAD |
| 620 |
and LIST parameters. |
| 621 |
MODRESTART has been entirely removed. Use "MODULE RELOAD *" to reload |
| 622 |
all modules |
| 623 |
o) Added back server notice when a client tries to obtain a reserved nick name |
| 624 |
o) Removed OMOTD module |
| 625 |
o) Added 'set' to operator privilege flags. Gives access to the "SET" command |
| 626 |
o) Improved TS6 support |
| 627 |
o) Channel keys/passwords are now case sensitive |
| 628 |
|
| 629 |
|
| 630 |
-- Noteworthy changes in version 8.0.0beta1 (2012-05-28) |
| 631 |
o) Implemented full services support, including but not limited to the |
| 632 |
following changes: |
| 633 |
- Added SVSNICK, and SVSMODE command handlers |
| 634 |
- Added service stamps to NICK/UID messages |
| 635 |
- Added SVS to server capabilities (CAPAB). SVS capable servers can |
| 636 |
deal with extended NICK/UID messages that contain service IDs/stamps. |
| 637 |
- Changed rejected client notices to go to new usermode +j. These |
| 638 |
previously used usermode +r. |
| 639 |
- Added usermode +r (registered nick) and channelmode +r (registered channel) |
| 640 |
- Added usermode +R (only registered clients may send a private message) |
| 641 |
- Added channelmode +R (only registered clients may join that channel) |
| 642 |
- Various services shortcuts have been added (/NS, /CS, /NICKSERV, /CHANSERV, etc.) |
| 643 |
- Added services {} block to ircd.conf |
| 644 |
- Added services_name directive to general {} block |
| 645 |
- Added GLOBOPS mainly for services compatibility, but can be used by operators, too |
| 646 |
o) Removed RKLINE and RXLINE commands. Regular expression based bans should |
| 647 |
only be added via ircd.conf |
| 648 |
o) Added 'globops', 'restart', 'dline', 'undline' and 'module' operator |
| 649 |
privilege flags. Read doc/reference.conf for further explanation of what |
| 650 |
these flags control |
| 651 |
o) Removed Idle-time klines |
| 652 |
o) Cleaned up modules API. Old modules won't work anymore |
| 653 |
o) Removed 'general::burst_away' configuration directive. AWAY bursts are now |
| 654 |
controlled via 'connect::flags' explicitly |
| 655 |
o) Introduced new logging subsystem including log rotation based on |
| 656 |
file sizes. Log timestamp format is ISO8601 now |
| 657 |
o) Added support for remote D-lines |
| 658 |
o) Added usermode +H which is basically a replacement for the hidden_admin and |
| 659 |
hidden_oper operator flags. With usermode +H, irc operator status can now |
| 660 |
be hidden even on remote servers |
| 661 |
o) Added CIDR support for operator {} blocks |
| 662 |
o) Removed the servlink program. ircd-hybrid can now make use of |
| 663 |
SSL/TLS for inter-server communication. |
| 664 |
NOTE: compressed server links are of course still available, but a SSL/TLS |
| 665 |
connection is required, as compression is now handled via OpenSSL |
| 666 |
o) Removed 'ssl_server_protocol' configuration directive and |
| 667 |
added 'ssl_client_method' and 'ssl_server_method' instead. |
| 668 |
Both of these options can now be changed at runtime |
| 669 |
o) Oper login IDs are no longer limited to NICKLEN*2 |
| 670 |
o) Removed 'channel::burst_topicwho' configuration option. This feature is now |
| 671 |
enabled by default |
| 672 |
o) "STATS Y|y" now reports CIDR limits as well |
| 673 |
o) Added m_webirc.c to contrib/ |
| 674 |
o) Overall code cleanup and speed improvements |
| 675 |
|
| 676 |
-------------------------------------------------------------------------------- |
| 677 |
|
| 678 |
BUG REPORTS: If you run this code and encounter problems, you must report |
| 679 |
the bug by EMAIL to bugs@ircd-hybrid.org |
| 680 |
Please include a gdb backtrace and a copy of your config.h and |
| 681 |
ircd.conf with any report (with passwords and other sensitive |
| 682 |
information masked). |
| 683 |
|
| 684 |
DISCUSSION: There is a mailing list for discussion of hybrid issues, |
| 685 |
including betas. To subscribe, use this link: |
| 686 |
https://lists.ircd-hybrid.org/mailman/listinfo/hybrid |
| 687 |
This is the proper place to discuss new features, bugs, etc. |
| 688 |
|
| 689 |
Questions/comments directed to bugs@ircd-hybrid.org |
| 690 |
|
| 691 |
Other files recommended for reading: README, INSTALL |
| 692 |
|
| 693 |
-------------------------------------------------------------------------------- |
| 694 |
$Id$ |
