ViewVC Help
View File | Revision Log | Show Annotations | View Changeset | Root Listing
root/svn/ircd-hybrid/releases/8.2.0beta1/NEWS
(Generate patch)

Comparing:
ircd-hybrid-7.2/RELNOTES (file contents), Revision 687 by michael, Sat Jun 17 09:46:45 2006 UTC vs.
ircd-hybrid/branches/8.2.x/NEWS (file contents), Revision 3418 by michael, Tue Apr 29 15:09:20 2014 UTC

# Line 1 | Line 1
1 < -- ircd-hybrid-7.2.2 RELNOTES
2 < o) Added channel::disable_fake_channels config directive
3 < o) Fixed broken FORCEJOIN  (contrib)
4 < o) Added missing documentation for connect::vhost
5 < o) Fixed problem with G-Line voting
6 < o) Fixed "STATS ?" so it doesn't report negative traffic statistics
7 < o) Fixed core in m_mkpasswd.c  (contrib)
8 < o) Reduced memory usage for channel members
9 < o) Added general::stats_e_disabled which simply disables "STATS e"
10 <   for other operators and administrators
11 < o) Ignore signal SIGXFSZ to prevent the daemon from dying on missconfigured
12 <   file size limits
13 < o) Slight optimizations to the block allocator
14 < o) Fixed harmless bug that could result in incorrect bytes sent statistics
15 <   in "STATS t"
16 < o) "STATS y|Y" now shows whether a class is active or disabled
17 <
18 <
19 < -- ircd-hybrid-7.2.1 RELNOTES
20 < o) Fixed build on SRV4
21 < o) Fixed problem where ircd would disconnect all SSL connections
22 < o) Added initial CAP support.  Additional documentation can be found
23 <   in doc/technical
24 < o) Speeded up command parsing
25 < o) Fixed occasional core dump on UN*LINE
26 < o) Fixed bug where particular clients would always receive
27 <   "Load is temporarily too heavy" message
28 < o) Improved memory consumption, i.e. memory consumption has
29 <   been reduced for remote clients
30 < o) Fixed possible core in case default_cipher_preference directive isn't set
31 < o) Fixed "CHANSERV INVITE" bug with anope services
32 < o) Updated example configuration files to reflect new topicburst flags
33 <   directive in connect{} blocks
34 < o) Fixed core if using the operator::umodes directive
35 < o) Don't allow shared k-lines to be set without a valid reason
36 < o) Improved channel ban match processing.  This also fixes CIDR bans
37 <
38 <
39 < -- ircd-hybrid-7.2.0 RELNOTES
40 < o) Fixed broken operwall = yes;
41 < o) Added 'umode' directive to oper{}.  List of modes to get on /OPER.
42 <   This behaves exactly like H6's sixth O line field
43 < o) Fixed a WHOIS bug
44 < o) Fixed bug where we would increase Count.invisi even
45 <   if general::invisible_on_connect is turned off
46 < o) Removed invite_ops_only, controlled by paranoid (+p) now
47 < o) Better DDoS protection
48 < o) Fixed va_list bug on amd64
49 < o) Fixed /dev/poll
50 <
51 <
52 < -- ircd-hybrid-7.2rc1 RELNOTES
53 < o) ircd can dynamically change all its client/fd limits at runtime
54 < o) Added epoll as the primary I/O engine under Linux
55 < o) Local channels will not show up in remote /WHOIS
56 < o) Added hidden_name which allows customized hidden server names
57 < o) Added restrict_channels to define a static channel set
58 < o) Added --disable-gline-voting to disable G-Line votes
59 <   for small networks or people who don't want it.
60 < o) Allow accumulating more ip= entries in an exempt{} block
61 < o) Various improvements and bugfixes
62 < o) Make win32 build usable
63 < o) Fixed ban caching bug
64 < o) Cosmetical fixes to TIME
65 < o) Get "KLINE nick" to work with clients that have a spoof
66 < o) Fixed RESV/XLINE bug in conjunction with names that include escaped
67 <   characters such as \*, \?, \#.
68 <
69 <
70 < -- ircd-hybrid-7.2beta1 RELNOTES
71 < o) Usermode +G, like +g, but allow messaging from people on common channels
72 < o) Usermode +D - "deaf", don't receive channel messages
73 < o) RXLINE and RKLINE - commands for setting perl compatible regular expression
74 <   based K and X lines
75 < o) Join flood is now detected and reported to +b opers
76 < o) Re-added REJECT_HOLD - lock clients for a while before throwing away
77 < o) ping_warning, a class{} option to notify opers before "Ping timeout"
78 < o) New hooking system, modularized: usermodes, iauth, message filtering etc.
79 < o) Network I/O speedups
80 < o) Various cleanups and bugfixes
81 < o) Support for client SSL
82 < o) Support for services (contrib/m_services.c)
83 < o) IP cloaking module (contrib/ip_cloaking.c)
84 < o) Native win32 build
85 < o) The password set in auth::password can now be encrypted
86 < o) Introduced new listen::flags directive.  Currently available flags are
87 <   'ssl' and 'hidden'.  Please read example.conf for further details
1 > -- Noteworthy changes in version 8.2.0beta1 (2014-04-29)
2 > o) TS6 is now mandatory. ircd is no longer backwards compatible with TS5
3 >   and below.
4 > o) SVSJOIN and SVSPART has been added
5 > o) Major code cleanups and refactoring. Improved overall performance
6 > o) /info now also reports MPATH and SPATH
7 > o) Updated several help files
8 >
9 >
10 > -- Noteworthy changes in version 8.1.16 (2014-04-20)
11 > o) Fixed undefined behaviour with crypt() returning NULL
12 >   since glibc2.17 in certain cases
13 > o) Admins may now see all channel members via "WHO #channel"
14 >   regardless of channel mode +s
15 > o) Fixed corrupted "STATS U" output
16 >
17 >
18 > -- Noteworthy changes in version 8.1.15 (2014-03-29)
19 > ########################################################################
20 > o) IMPORTANT: ircd binary is now again placed into bin/ instead of sbin/
21 > ########################################################################
22 > o) mkpasswd in tools/ now defaults to MD5 instead of DES
23 > o) USERS command has been removed
24 > o) Fixed issue with SVSNICK where clients self-collided when changing
25 >   just the case of the nick name, i.e. somenick -> SomeNicK
26 > o) Minor code cleanups and cosmetical fixes
27 >
28 >
29 > -- Noteworthy changes in version 8.1.14 (2014-02-25)
30 > o) WHOWAS now honors serverhide::disable_remote_commands
31 > o) Improved TS6 inter-server communication
32 > o) Minor code cleanups and speed enhancements
33 > o) Added 'unxline' oper flag
34 > o) Added support for "userhost-in-names" client capability
35 > o) ircd now allows private rsa keys larger than 2048 bits
36 > o) Fixed bug where signals stopped from working after restarting
37 >   the ircd via SIGINT
38 > o) Fixed bug where certain irc clients could not reconnect via TLS/SSL
39 > o) Fixed long-standing bug where +p channels have been shown
40 >   in the /whois reply
41 >
42 >
43 > -- Noteworthy changes in version 8.1.13 (2014-01-07)
44 > o) Fixed EOB not working for remote servers (resulted in fake
45 >   direction notices)
46 > o) Fixed remote client connection notices for servers that are
47 >   more than one hop away
48 > o) Fixed bug where ircd didn't timeout SSL connections that
49 >   haven't finished the SSL handshake
50 > o) Fixed several bugs with server hiding
51 > o) Updated/fixed help files
52 > o) WHOIS no longer sends a notice to +y operators
53 >
54 >
55 > -- Noteworthy changes in version 8.1.12 (2013-12-22)
56 > o) RPL_WHOISMODES now uses the 379 numeric
57 > o) Serial number is now shown on start up
58 > o) Fixed possible channel mode desynch with services
59 > o) Fixed TS6 support with LOCOPS
60 > o) Minor code cleanups
61 > o) Fixed file descriptor leak with empty help files
62 > o) Fixed issue with WEBIRC where hostnames were
63 >   not validated
64 >
65 >
66 > -- Noteworthy changes in version 8.1.11 (2013-12-06)
67 > o) Administrators may now see channel modes in /LIST
68 > o) Fixed compile error on BSD systems when building with kqueue()
69 >
70 >
71 > -- Noteworthy changes in version 8.1.10 (2013-11-25)
72 > o) Fixed bug with kqueue() where it occasionally dropped updates
73 > o) Changed WHOIS to show a client's certificate fingerprint
74 >   to administrators only
75 > o) The WHO reply now shows whether or not a nickname has
76 >   been registered with NickServ. ('r' status flag)
77 > o) Fixed some flaws with server hiding
78 > o) Fixed bug where "STATS P" would leak ip addresses to remotely connected
79 >   administrators, even if serverhide::hide_server_ips was set to 'yes'
80 > o) Services coders: added SVSKILL
81 >
82 >
83 > -- Noteworthy changes in version 8.1.9 (2013-11-08)
84 > o) Added usermode +W. Users connected via a webirc gateway get this
85 >   mode set by servers.
86 > o) /WHOIS now shows if a client is connected via a webirc
87 >   gateway
88 > o) Administrators may now see +s channels a user is in with /WHOIS.
89 >   Secret channels are prepended with a tilde in the /WHOIS
90 >   reply.
91 > o) Administrators are now able to see all the user modes a user has
92 >   set via /whois
93 >
94 >
95 > -- Noteworthy changes in version 8.1.8 (2013-10-25)
96 > o) Fixed bug that would lead to a desynchronized nick database
97 >   throughout the entire network if using services enforced
98 >   nick names (SVSNICK)
99 > o) Cleaned up/modernized build system
100 > o) Add -fstack-protector to CFLAGS if available. Basically checks for
101 >   buffer overflows/stack-smashing attacks
102 > o) When using anope 1.9/2.0 services, /WHOIS now shows the account name
103 >   of a registered/identified client (numeric 330)
104 > o) Administrators can now see +s channels in /LIST
105 >
106 >
107 > -- Noteworthy changes in version 8.1.7 (2013-08-18)
108 > o) Fixed issue with channel mode +n having no functionality at all
109 > o) Fixed SSL certificate fingerprint validation for outgoing server connects
110 > o) Updated several documentation files
111 >
112 >
113 > -- Noteworthy changes in version 8.1.6 (2013-08-02)
114 > o) Fixed possible core with empty motd files
115 >
116 >
117 > -- Noteworthy changes in version 8.1.5 (2013-07-16)
118 > o) Fixed bug that would prevent servers from linking together
119 >   if connect::aftype isn't set
120 >
121 >
122 > -- Noteworthy changes in version 8.1.4 (2013-07-05)
123 > o) Added 'xline' and 'resv' logging types. See doc/reference.conf
124 >   for more information
125 > o) Fixed bug where remote /STATS requests were not rate limited
126 > o) Fixed core with empty auth::spoof entries
127 > o) Increased oper/auth/connect password length limit from 20 to 128
128 > o) Minor fixes to nickflood control code
129 >
130 >
131 > -- Noteworthy changes in version 8.1.3 (2013-06-23)
132 > o) Fixed possible core on "STATS z"
133 > o) Revised doc/reference.conf
134 > o) Fixed broken --disable-libgeoip switch
135 >
136 >
137 > -- Noteworthy changes in version 8.1.2 (2013-06-20)
138 > o) Added general::cycle_on_host_change configuration option
139 > o) Added general::stats_u_oper_only configuration option
140 > o) Added support for SHA-256 ssl certificate fingerprint based operator{}
141 >   and connect{} blocks.
142 >   In conjunction with Anope 1.9/2.0 IRC-services, clients are now also able
143 >   to automatically identify for their nick with ssl certificate
144 >   fingerprints
145 > o) Added operator::ssl_connection_required configuration option. See
146 >   doc/reference.conf for more information
147 > o) Added usermode +S (client is connected via SSL/TLS). Allows services
148 >   to keep track of what users are connected via SSL, and allows to see
149 >   ssl-status of remote clients in a /whois
150 > o) Fixed a server name leak with server hiding enabled. Reported by
151 >   Adam <adam@anope.org>
152 >
153 >
154 > -- Noteworthy changes in version 8.1.1 (2013-06-06)
155 > ########################################################################
156 > o) IMPORTANT: moved disable_remote_command configuration directive from
157 >   general{} block to serverhide{} block
158 > ########################################################################
159 > o) Minor code cleanups/performance improvements
160 > o) Fixed bug where opers could see LOCOPS messages even if they don't have
161 >   the +l mode set
162 > o) Fixed bug where non-SSL clients could join +S channels on non-SSL servers
163 > o) Implemented motd{} configuration blocks. See doc/reference.conf for more
164 >   information
165 > o) "STATS T" shows configured MOTD files
166 >
167 >
168 > -- Noteworthy changes in version 8.1.0 (2013-05-23)
169 > o) Minor code cleanups/performance improvements
170 >
171 >
172 > -- Noteworthy changes in version 8.1.0rc1 (2013-05-19)
173 > o) Fixed broken spoofs
174 >
175 >
176 > -- Noteworthy changes in version 8.1.0beta5 (2013-05-15)
177 > o) Removed 'remote', and 'global_kill' oper flags, and added 'connect',
178 >   'squit', and 'kill' flags for better fine-tuning instead. Whether or
179 >   not a specific action is allowed on a remote server can be controlled
180 >   by appending the ':remote' flag. For example: 'kill' allows only local
181 >   clients to be killed, whereas 'kill:remote' allows to issue a KILL for
182 >   remote clients
183 > o) Added 'locops' and 'wallops' to irc-operator flags
184 > o) Improve/cleanup HELP system
185 >
186 >
187 > -- Noteworthy changes in version 8.1.0beta4 (2013-05-09)
188 > o) Implemented channel mode +M. Clients that haven't identified their
189 >   name with NickServ may not speak in a channel that has this mode set
190 > o) Fixed weird idletimes shown in /trace
191 > o) Added 'nononreg' (+R) to general::oper_umodes
192 > o) Added user mode +F (can see remote client connect/exit notices)
193 >
194 >
195 > -- Noteworthy changes in version 8.1.0beta3 (2013-05-05)
196 > o) PCRE support has been dropped
197 > o) "STATS o" now shows how many times an oper{} block has been used.
198 >   Similar to STATS x|q"
199 > o) Implemented channel mode +c. Known from other ircds, this mode basically
200 >   prevents users from sending messages including control codes to a channel
201 >   that has this mode set
202 > o) Fixed bug where bans were not checked against non-channel members when
203 >   sending messages to a channel
204 > o) Removed channel::quiet_on_ban configuration option. This feature is
205 >   now enabled by default
206 >
207 >
208 > -- Noteworthy changes in version 8.1.0beta2 (2013-04-28)
209 > o) Fixed broken compile with libGeoIP disabled
210 > o) Code cleanups; working towards stabilization and improved performance
211 > o) Removed operflag 'nick_changes'. Operators can now set +n at will
212 > o) Fixed shared{} blocks not working as expected
213 > o) Fixed spoofs not working as expected
214 >
215 >
216 > -- Noteworthy changes in version 8.1.0beta1 (2013-04-25)
217 > ########################################################################
218 > o) IMPORTANT: name/channel entries can't be stacked any longer within
219 >   a single resv{} block. Each entry now requires its own resv{} block.
220 >   Read doc/reference.conf for more details
221 > #######################################################################
222 > o) Added resv::exempt configuration option. Exempt can be either a
223 >   ISO 3166 alpha-2 two letter country code, or a nick!user@host mask.
224 >   CIDR is supported
225 > o) Removed channel::restrict_channels configuration option
226 > o) Preliminary libGeoIP support. Currently only used for exempt entries
227 >   in resv{} blocks
228 > o) Improved WEBIRC authentication; added 'webirc' to auth::flags.
229 >   A "webirc." spoof is now no longer required
230 > o) Implemented new memory pool allocator which basically is based upon Tor's
231 >   mempool allocator for Tor cells
232 > o) Major code cleanups
233 > o) Implemented new binary database storage for X-,D-,K-,G-Lines and RESVs.
234 >   Temporary bans are now stored as well and will persist after a reboot
235 > o) Channel based resv{} blocks may now contain wildcards
236 > o) NICK/JOIN now shows the actual reason of reserved nick-/channelnames
237 > o) contrib/ and its content has been removed from the tree
238 > o) Added serverhide::hide_services configuration option
239 > o) Added 'nononreg' (+R) to oper::umodes and general::oper_only_modes
240 > o) Added support for "away-notify" client capability
241 >
242 >
243 > -- Noteworthy changes in version 8.0.9 (2013-05-16)
244 > o) Fixed bug where ircd would sometimes drop a services link because
245 >   of a missing argument to the SVSMODE command
246 > o) Fixed weird idletimes shown in /trace
247 >
248 >
249 > -- Noteworthy changes in version 8.0.8 (2013-04-28)
250 > o) "STATS s" now shows configured services{} blocks as well
251 > o) Fixed compile warnings, minor code cleanups and optimizations
252 > o) Increased nickname history length to 32768
253 > o) Unidentified/unregistered nicks may not speak in +R channels
254 >
255 >
256 > -- Noteworthy changes in version 8.0.7 (2013-04-12)
257 > o) Services may now set a channel topic without joining the channel first
258 > o) Fixed bug where /whois would send empty sockhost information on TS5
259 >   servers
260 > o) Remote server connection and split notices now go to new usermode +e.
261 >   These previously used usermode +x.
262 > o) Services may now change the host of a specific user
263 >   via "SVSMODE <timestamp> <target> +x <hostname>"
264 >
265 >
266 > -- Noteworthy changes in version 8.0.6 (2013-01-28)
267 > o) Fix bug where idle time sometimes is 0 even if the client didn't
268 >   send any private message
269 > o) Fixed possible core in try_parse_v4_netmask()
270 >
271 >
272 > -- Noteworthy changes in version 8.0.5 (2013-01-24)
273 > ########################################################################
274 > o) IMPORTANT: nick and topic lengths are now configurable via ircd.conf.
275 >   A max_nick_length, as well as a max_topic_length configuration option
276 >   can now be found in the serverinfo{} block
277 > ########################################################################
278 > o) Fixed build on GNU/Hurd as reported by Dominic Hargreaves
279 > o) Fixed log files not getting reopened after /rehash
280 > o) Improved logging of configuration file issues
281 > o) ircd.pid has been accidentally saved in /var instead of /var/run
282 > o) Linux RT signal support for notification of socket events has been dropped
283 > o) Fixed "STATS Y|y" sometimes sending weird sendq/recvq values
284 > o) INFO now also shows configured values of 'disable_fake_channels',
285 >   and 'stats_e_disabled'
286 > o) m_webirc.c is now officially supported, and has been moved from contrib/
287 >   to modules/
288 > o) /whois, /stats p, and /trace may now show fake idle times depending on
289 >   how the new class::min_idle and class::max_idle configuration directives
290 >   have been configured. This feature basically works in the same
291 >   way as it does in csircd
292 > o) The configuration parser now does support 'year' and 'month' units
293 >
294 >
295 > -- Noteworthy changes in version 8.0.4 (2013-01-02)
296 > o) Fixed possible core on USERHOST/ISON with optimization enabled
297 > o) Fixed bug where can_flood sometimes didn't work as expected
298 >
299 >
300 > -- Noteworthy changes in version 8.0.3 (2012-12-24)
301 > o) Fixed core on UNDLINE
302 > o) XLINE/KLINE/RESV/DLINE/SQUIT and KILL now have the same default reason
303 >   if a reason hasn't been specified
304 >
305 >
306 > -- Noteworthy changes in version 8.0.2 (2012-12-20)
307 > o) Minor updates to the build system
308 > o) Fixed broken --enable-assert configure switch
309 > o) Fixed bug where timed events stopped from working if the system's
310 >   clock is running backwards
311 > o) STATS q|Q now shows how many times a resv{} block has been matched
312 > o) Fixed contributed WEBIRC module
313 > o) IRC operators may now again see server generated nick rejection notices
314 >
315 >
316 > -- Noteworthy changes in version 8.0.1 (2012-11-04)
317 > o) Fixed broken CIDR support for CHALLENGE based irc operator logins
318 > o) Fixed class limits not properly applying to oper{} blocks
319 > o) Fixed possible TBURST desynchronization with services
320 > o) Fixed TBURST sending server's name to clients if it's a hidden server
321 >
322 >
323 > -- Noteworthy changes in version 8.0.0 (2012-10-18)
324 > o) Fixed an off-by-one with spoofs. Spoofs are now also checked for
325 >   invalid characters
326 > o) Removed general::use_whois_actually configuration directive. This is
327 >   now enabled by default
328 > o) Minor SQUIT handling fixes
329 > o) Fixed bancache not being updated on CHGHOST/CHGIDENT
330 >
331 >
332 > -- Noteworthy changes in version 8.0.0rc1 (2012-09-28)
333 > o) Removed general::client_flood configuration option and added the
334 >   new 'recvq' configuration directive to class{} blocks.
335 >   The max size of a receive queue can be seen in "STATS Y"
336 >   for each class
337 > o) Allow the '[' and ']' characters in server description
338 >
339 >
340 > -- Noteworthy changes in version 8.0.0beta3 (2012-08-24)
341 > o) Fixed wrong syntax in several language files
342 > o) Removed &localchannels
343 > o) PRIVMSG to opers@some.server is no longer supported
344 > o) Fixed bug that could lead to topic desynchronization
345 > o) Removed serverhide::disable_hidden configuration option
346 > o) Dropped ircd-hybrid-6 GLINE compatibility mode
347 > o) Removed use_invex, use_except and use_knock configuration options.
348 >   These features are now enabled by default
349 >
350 >
351 > -- Noteworthy changes in version 8.0.0beta2 (2012-07-21)
352 > o) channel::disable_fake_channels now also disables ascii 29 (mIRC italic)
353 >   when set to yes
354 > o) Added channel::max_chans_per_oper configuration directive. The old way
355 >   was to let operators join three times the amount of max_chans_per_user
356 > o) Replaced MODLOAD, MODUNLOAD, MODRELOAD, MODLIST and MODRESTART commands
357 >   with the new MODULE command which can be fed with the LOAD, UNLOAD, RELOAD
358 >   and LIST parameters.
359 >   MODRESTART has been entirely removed. Use "MODULE RELOAD *" to reload
360 >   all modules
361 > o) Added back server notice when a client tries to obtain a reserved nick name
362 > o) Removed OMOTD module
363 > o) Added 'set' to operator privilege flags. Gives access to the "SET" command
364 > o) Improved TS6 support
365 > o) Channel keys/passwords are now case sensitive
366 >
367 >
368 > -- Noteworthy changes in version 8.0.0beta1 (2012-05-28)
369 > o) Implemented full services support, including but not limited to the
370 >   following changes:
371 >   - Added SVSNICK, and SVSMODE command handlers
372 >   - Added service stamps to NICK/UID messages
373 >   - Added SVS to server capabilities (CAPAB). SVS capable servers can
374 >     deal with extended NICK/UID messages that contain service IDs/stamps.
375 >   - Changed rejected client notices to go to new usermode +j.  These
376 >     previously used usermode +r.
377 >   - Added usermode +r (registered nick) and channelmode +r (registered channel)
378 >   - Added usermode +R (only registered clients may send a private message)
379 >   - Added channelmode +R (only registered clients may join that channel)
380 >   - Various services shortcuts have been added (/NS, /CS, /NICKSERV, /CHANSERV, etc.)
381 >   - Added services{} block to ircd.conf
382 >   - Added services_name directive to general{} block
383 >   - Added GLOBOPS mainly for services compatibility, but can be used by operators, too
384 > o) Removed RKLINE and RXLINE commands. Regular expression based bans should
385 >   only be added via ircd.conf
386 > o) Added 'globops', 'restart', 'dline', 'undline' and 'module' operator
387 >   privilege flags. Read doc/reference.conf for further explanation of what
388 >   these flags control
389 > o) Removed Idle-time klines
390 > o) Cleaned up modules API. Old modules won't work anymore
391 > o) Removed general::burst_away configuration directive. AWAY bursts are now
392 >   controlled via connect::flags explicitly
393 > o) Introduced new logging subsystem including log rotation based on
394 >   file sizes. Log timestamp format is ISO8601 now
395 > o) Added support for remote D-lines
396 > o) Added usermode +H which is basically a replacement for the hidden_admin and
397 >   hidden_oper operator flags. With usermode +H, irc operator status can now
398 >   be hidden even on remote servers
399 > o) Added CIDR support for operator{} blocks
400 > o) Removed the servlink program. ircd-hybrid can now make use of
401 >   SSL/TLS for inter-server communication.
402 >   NOTE: compressed server links are of course still available, but a SSL/TLS
403 >   connection is required, as compression is now handled via OpenSSL
404 > o) Removed 'ssl_server_protocol' configuration directive and
405 >   added 'ssl_client_method' and 'ssl_server_method' instead.
406 >   Both of these options can now be changed at runtime
407 > o) Oper login IDs are no longer limited to NICKLEN*2
408 > o) Removed channel::burst_topicwho configuration option. Topicsetters are
409 >   now sent by default
410 > o) "STATS Y|y" now reports CIDR limits as well
411 > o) Added m_webirc.c to contrib/
412 > o) Overall code cleanup and speed improvements
413  
414   --------------------------------------------------------------------------------
415  
416 < BUGS: Major bugs in this release are listed in BUGS
416 > This is still BETA code. Run it at your own risk. By running this
417 > code you assume FULL responsibility for any problems it may cause.
418 > We do NOT recommend that you run BETA code on production IRC networks
419 > such as EFnet.
420  
421   BUG REPORTS: If you run this code and encounter problems, you must report
422 < the bug in one of the following ways:
423 <  a) By EMAIL to bugs@ircd-hybrid.org
424 <  b) On http://forum.ircd-hybrid.org/
97 < Please include a gdb backtrace and a copy of your setup.h and
98 < ircd.conf with any report  (with passwords and other sensitive
422 > the bug by EMAIL to bugs@ircd-hybrid.org
423 > Please include a gdb backtrace and a copy of your config.h and
424 > ircd.conf with any report (with passwords and other sensitive
425   information masked).
426  
427   DISCUSSION: There is a mailing list for discussion of hybrid issues,
428 < including betas.  To subscribe, use this link:
428 > including betas. To subscribe, use this link:
429      https://lists.ircd-hybrid.org/mailman/listinfo/hybrid
430 < This is the proper place to discuss new features, bugs, etc.  Posting here
105 < is much more likely to get something done than ranting on #TZ.
106 < You can also use Hybrid forums at http://forum.ircd-hybrid.org/
430 > This is the proper place to discuss new features, bugs, etc.
431  
432   Questions/comments directed to bugs@ircd-hybrid.org
433  
434 < Please read doc/whats-new.txt for information about what is in this release
111 <
112 < Other files recommended for reading: BUGS, README.FIRST, INSTALL
434 > Other files recommended for reading: README, INSTALL
435  
436   --------------------------------------------------------------------------------
437   $Id$

Diff Legend

Removed lines
+ Added lines
< Changed lines (old)
> Changed lines (new)