/[svn]/ircd-hybrid/etc/example.conf
ViewVC logotype

Contents of /ircd-hybrid/etc/example.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 757 - (show annotations)
Fri Aug 18 10:41:40 2006 UTC (14 years, 2 months ago) by michael
File size: 35221 byte(s)
- Updated example.conf

1 /* doc/example.conf - ircd-hybrid-7 Example configuration file
2 * Copyright (C) 2000-2006 Hybrid Development Team
3 *
4 * Written by ejb, wcampbel, db, leeh and others
5 * Other example configurations can be found in the source dir under
6 * etc/.
7 *
8 * $Id$
9 */
10
11 /* IMPORTANT NOTES:
12 *
13 * auth {} blocks MUST be specified in order of precedence. The first one
14 * that matches a user will be used. So place spoofs first, then specials,
15 * then general access.
16 *
17 * Shell style (#), C++ style (//) and C style comments are supported.
18 *
19 * Files may be included by either:
20 * .include "filename"
21 * .include <filename>
22 *
23 * Times/durations are written as:
24 * 12 hours 30 minutes 1 second
25 *
26 * Valid units of time:
27 * month, week, day, hour, minute, second
28 *
29 * Valid units of size:
30 * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31 *
32 * Sizes and times may be singular or plural.
33 */
34
35 /* EFNET NOTE:
36 *
37 * This config file is NOT suitable for EFNet. EFNet admins should use
38 * example.efnet.conf
39 */
40
41 /*
42 * serverinfo {}: contains information about the server. (OLD M:)
43 */
44 serverinfo {
45 /*
46 * name: the name of our server
47 */
48 name = "hades.arpa";
49
50 /*
51 * sid: a server's unique ID. This is three characters long and must
52 * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
53 * a digit, followed by 2 alpha-numerical letters.
54 * Note: The letters must be capitalized. This cannot be changed at
55 * runtime.
56 */
57 sid = "_CHANGE_ME_";
58
59 /*
60 * description: the description of the server. '[' and ']' may not
61 * be used here for compatibility with older servers.
62 */
63 description = "hybrid-7 test server";
64
65 /*
66 * network info: the name and description of the network this server
67 * is on. Shown in the 005 reply and used with serverhiding.
68 */
69 network_name = "MyNet";
70 network_desc = "This is My Network";
71
72 /*
73 * hub: allow this server to act as a hub and have multiple servers
74 * connected to it.
75 */
76 hub = no;
77
78 /*
79 * vhost: the IP to bind to when we connect outward to ipv4 servers.
80 * This should be an ipv4 IP only, or "* for INADDR_ANY.
81 */
82 #vhost = "192.169.0.1";
83
84 /*
85 * vhost6: the IP to bind to when we connect outward to ipv6 servers.
86 * This should be an ipv6 IP only, or "* for INADDR_ANY.
87 */
88 #vhost6 = "3ffe:80e8:546::2";
89
90 /* max_clients: the maximum number of clients allowed to connect */
91 max_clients = 512;
92
93 /*
94 * rsa_private_key_file: the path to the file containing our
95 * rsa key for cryptlink.
96 *
97 * Example command to store a 2048 bit RSA keypair in
98 * rsa.key, and the public key in rsa.pub:
99 *
100 * openssl genrsa -out rsa.key 2048
101 * openssl rsa -in rsa.key -pubout -out rsa.pub
102 * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
103 * chmod 0600 rsa.key
104 * chmod 0644 rsa.pub
105 */
106 #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
107
108 /*
109 * ssl_certificate_file: the path to the file containing our ssl
110 * certificate for encrypted client connection.
111 *
112 * This assumes your private RSA key is stored in rsa.key. You
113 * MUST have an RSA key in order to generate the certificate
114 *
115 * openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
116 *
117 * See http://www.openssl.org/docs/HOWTO/certificates.txt
118 *
119 * Please use the following values when generating the cert
120 *
121 * Organization Name: Network Name
122 * Organization Unit Name: changme.someirc.net
123 * Common Name: irc.someirc.net
124 * E-mail: you@domain.com
125 */
126 #ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
127 };
128
129 /*
130 * admin {}: contains admin information about the server. (OLD A:)
131 */
132 admin {
133 name = "Admin's name";
134 description = "Main Server Administrator";
135 email = "<irc-admin@network.tld>";
136 };
137
138 /*
139 * log {}: contains information about logfiles.
140 */
141 log {
142 /* Do you want to enable logging to ircd.log? */
143 use_logging = yes;
144
145 /*
146 * logfiles: the logfiles to use for user connects, /oper uses,
147 * and failed /oper. These files must exist for logging to be used.
148 */
149 fname_userlog = "logs/userlog";
150 fname_operlog = "logs/operlog";
151 fname_killlog = "logs/kill";
152 fname_klinelog = "logs/kline";
153 fname_glinelog = "logs/gline";
154
155 /*
156 * log level: the amount of detail to log in ircd.log. The
157 * higher, the more information is logged. May be changed
158 * once the server is running via /quote SET LOG. Either:
159 * L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
160 */
161 log_level = L_INFO;
162 };
163
164 /* class {}: contain information about classes for users (OLD Y:)
165 * ALL FIELDS EXCEPT 'name' ARE OPTIONAL. */
166 class {
167 /* name: the name of the class. (Classes are text now.) */
168 name = "users";
169
170 /*
171 * ping_time: how often a client must reply to a PING from the
172 * server before they are dropped.
173 */
174 ping_time = 90 seconds;
175
176 /*
177 * Clone control stuff: max number of clients per *@host or user@host.
178 *
179 * Remember everything is optional here. If you don't specify limit
180 * type, 'local' is assumed. NO SPACE CAN OCCUR AROUND ':' !!
181 *
182 * You can use names number_per_ip, number_per_userhost as well.
183 */
184 userhost_limit = local:1, global:4;
185 host_limit = global:10;
186
187 /* How many users this class can hold. */
188
189 # max_ident = 80;
190 # max_noident = 30;
191 max_number = 100;
192
193 /*
194 * The following lines are optional and allow you to define
195 * how many users can connect from one /NN subnet.
196 */
197 cidr_bitlen_ipv4 = 24;
198 cidr_bitlen_ipv6 = 120;
199 number_per_cidr = 16;
200
201 /*
202 * sendq: the amount of data allowed in a clients queue before
203 * they are dropped.
204 */
205 sendq = 100 kbytes;
206 };
207
208 class {
209 name = "opers";
210 ping_time = 90 seconds;
211 host_limit = 10;
212 max_total = 100;
213 sendq = 100kbytes;
214 };
215
216 class {
217 name = "server";
218 ping_time = 90 seconds;
219
220 /*
221 * ping_warning: how quickly a server must reply to a PING before
222 * a warning to opers is generated.
223 */
224 ping_warning = 15 seconds;
225
226 /*
227 * connectfreq: only used in server classes. Specifies the delay
228 * between autoconnecting to servers.
229 */
230 connectfreq = 5 minutes;
231
232 /* Here it specifies the amount of servers to autoconnect to */
233 max_total = 1;
234
235 /* sendq: servers need a higher sendq as they send more data */
236 sendq = 2 megabytes;
237 };
238
239 /*
240 * listen {}: contains information about the ports ircd listens on (OLD P:)
241 */
242 listen {
243 /*
244 * port: the specific port to listen on. If no host is specified
245 * before, it will listen on all available IPs.
246 *
247 * Ports are separated via a comma, a range may be specified using ".."
248 */
249
250 /* port: listen on all available IPs, ports 6665 to 6669 */
251 port = 6665 .. 6669;
252
253 /*
254 * Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
255 * unless you are an administrator.
256 *
257 * NOTE: The "flags" directive has to come before "port". Always!
258 */
259 flags = hidden, ssl;
260 host = "192.168.0.1";
261 port = 6697;
262
263 /*
264 * host: set a specific IP/host the ports after the line will listen
265 * on. This may be ipv4 or ipv6.
266 */
267 host = "1.2.3.4";
268 port = 7000, 7001;
269
270 host = "3ffe:1234:a:b:c::d";
271 port = 7002;
272 };
273
274 /*
275 * auth {}: allow users to connect to the ircd (OLD I:)
276 */
277 auth {
278 /*
279 * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
280 * lines are permitted per auth block.
281 */
282 user = "*@172.16.0.0/12";
283 user = "*test@123D:B567:*";
284
285 /* password: an optional password that is required to use this block */
286 password = "letmein";
287
288 /*
289 * encrypted: controls whether the auth password above has been
290 * encrypted.
291 */
292 encrypted = yes;
293
294 /*
295 * spoof: fake the users host to this. This is free-form,
296 * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
297 */
298 spoof = "chuck.norris.never.sleeps";
299
300 /* class: the class the user is placed in */
301 class = "opers";
302
303 /*
304 * need_password: don't allow users who haven't supplied the correct
305 * password to connect using another auth{} block
306 * ('&' prefix on /stats I if disabled)
307 * need_ident: require the user to have identd to connect ('+' prefix on /stats I)
308 * spoof_notice: enable spoofing notification to admins
309 * exceed_limit: allow a user to exceed class limits ('>' prefix on /stats I)
310 * kline_exempt: exempt this user from k/glines ('^' prefix on /stats I)
311 * gline_exempt: exempt this user from glines ('_' prefix on /stats I)
312 * resv_exempt: exempt this user from resvs ('$' prefix on /stats I)
313 * no_tilde: remove ~ from a user with no ident ('-' prefix on /stats I)
314 * can_flood: allow this user to exceed flood limits ('|' prefix on /stats I)
315 * can_idle: exempt this user from idle restrictions ('<' prefix on /stats I)
316 */
317 flags = need_password, spoof_notice, exceed_limit, kline_exempt,
318 gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
319 };
320
321 auth {
322 /*
323 * redirect: the server and port to redirect a user to. A user does
324 * not have to obey the redirection, the ircd just suggests an alternative
325 * server for them.
326 */
327 redirserv = "irc.fi";
328 redirport = 6667;
329
330 user = "*.fi";
331
332 /* class: a class is required even though it is not used */
333 class = "users";
334 };
335
336 auth {
337 user = "*@*";
338 class = "users";
339 flags = need_ident;
340 };
341
342 /*
343 * operator {}: defines ircd operators. (OLD O:)
344 *
345 * ircd-hybrid no longer supports local operators, privileges are
346 * controlled via flags.
347 */
348 operator {
349 /* name: the name of the oper */
350 /* Note: operator "opername"{} is also supported */
351 name = "chuck";
352
353 /*
354 * user: the user@host required for this operator. CIDR is
355 * supported. Multiple user="" lines are supported.
356 */
357 user = "*norris@*";
358 user = "*@192.168.0.0/16";
359
360 /*
361 * password: the password required to oper. By default this will
362 * need to be encrypted using 'mkpasswd'. MD5 is supported.
363 */
364 password = "etcnjl8juSU1E";
365
366 /*
367 * encrypted: controls whether the oper password above has been
368 * encrypted. (OLD CRYPT_OPER_PASSWORD now optional per operator)
369 */
370 encrypted = yes;
371
372 /*
373 * rsa_public_key_file: the public key for this oper when using Challenge.
374 * A password should not be defined when this is used, see
375 * doc/challenge.txt for more information.
376 */
377 # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
378
379 /* class: the class the oper joins when they successfully /oper */
380 class = "opers";
381
382 /*
383 * umodes: default usermodes opers get when they /oper. If defined,
384 * it will override oper_umodes settings in general {}.
385 * Available usermodes:
386 *
387 * +b - bots - See bot and drone flooding notices
388 * +c - cconn - Client connection/quit notices
389 * +D - deaf - Don't receive channel messages
390 * +d - debug - See debugging notices
391 * +f - full - See I: line full notices
392 * +G - softcallerid - Server Side Ignore for users not on your channels
393 * +g - callerid - Server Side Ignore (for privmsgs etc)
394 * +i - invisible - Not shown in NAMES or WHO unless you share a
395 * a channel
396 * +k - skill - See server generated KILL messages
397 * +l - locops - See LOCOPS messages
398 * +n - nchange - See client nick changes
399 * +r - rej - See rejected client notices
400 * +s - servnotice - See general server notices
401 * +u - unauth - See unauthorized client notices
402 * +w - wallop - See server generated WALLOPS
403 * +x - external - See remote server connection and split notices
404 * +y - spy - See LINKS, STATS, TRACE notices etc.
405 * +z - operwall - See oper generated WALLOPS
406 */
407 # umodes = locops, servnotice, operwall, wallop;
408
409 /*
410 * privileges: controls the activities and commands an oper is
411 * allowed to do on the server. All options default to no.
412 * Available options:
413 *
414 * global_kill: allows remote users to be /KILL'd (OLD 'O' flag)
415 * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
416 * remoteban: allows remote KLINE/UNKLINE
417 * kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
418 * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
419 * gline: allows GLINE (OLD 'G' flag)
420 * xline: allows XLINE (OLD 'X' flag)
421 * operwall: allows OPERWALL
422 * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
423 * via usermode +n
424 * rehash: allows oper to REHASH config (OLD 'H' flag)
425 * die: allows DIE and RESTART (OLD 'D' flag)
426 * admin: gives admin privileges. admins
427 * may (un)load modules and see the
428 * real IPs of servers.
429 * hidden_admin: same as 'admin', but noone can recognize you as
430 * being an admin
431 * hidden_oper: not shown in /stats p (except for other operators)
432 */
433 /* You can either use
434 * die = yes;
435 * rehash = yes;
436 *
437 * or in a flags statement i.e.
438 * flags = die, rehash;
439 *
440 * You can also negate a flag with ~ i.e.
441 * flags = ~remote;
442 *
443 */
444 flags = global_kill, remote, kline, unkline, xline,
445 die, rehash, nick_changes, admin, operwall;
446 };
447
448 /*
449 * connect {}: controls servers we connect to (OLD C:, N:, H:, L:)
450 */
451 connect {
452 /* name: the name of the server */
453 name = "irc.uplink.com";
454
455 /*
456 * host: the host or IP to connect to. If a hostname is used it
457 * must match the reverse dns of the server.
458 */
459 host = "192.168.0.1";
460
461 /*
462 * vhost: the IP to bind to when we connect outward to servers.
463 * serverinfo::vhost and serverinfo::vhost6 will be overridden
464 * by this directive.
465 */
466 vhost = "192.168.0.2";
467
468 /*
469 * passwords: the passwords we send (OLD C:) and accept (OLD N:).
470 * The remote server will have these passwords reversed.
471 */
472 send_password = "password";
473 accept_password = "anotherpassword";
474
475 /*
476 * encrypted: controls whether the accept_password above has been
477 * encrypted. (OLD CRYPT_LINK_PASSWORD now optional per connect)
478 */
479 encrypted = no;
480
481 /* port: the port to connect to this server on */
482 port = 6666;
483
484 /*
485 * hub_mask: the mask of servers that this server may hub. Multiple
486 * entries are permitted
487 */
488 hub_mask = "*";
489
490 /*
491 * leaf_mask: the mask of servers this server may not hub. Multiple
492 * entries are permitted. Useful for forbidding EU -> US -> EU routes.
493 */
494 # leaf_mask = "*.uk";
495
496 /* fakename: the servername we pretend to be when we connect */
497 # fakename = "*.arpa";
498
499 /* class: the class this server is in */
500 class = "server";
501
502 /*
503 * autoconn: controls whether we autoconnect to this server or not,
504 * dependent on class limits. By default, this is disabled.
505 * compressed: controls whether traffic is compressed via ziplinks.
506 * By default, this is disabled
507 * cryptlink: enable full encryption for all data passing between our
508 * server and this link and rsa authentication.
509 * burst_away: This will send the /away string that users have set
510 * on the server burst. Note this can be a lot of data
511 * and slow down your server burst.
512 * topicburst: Send topics to this server during channel burst. Works
513 * only if the server we are connecting to is capable
514 * of TBURST/TB.
515 */
516 # flags = autoconn, compressed, cryptlink, burst_away, topicburst;
517 };
518
519 connect {
520 name = "encrypted.auth.example";
521 host = "some.host.somewhere";
522 port = 6667;
523
524 flags = cryptlink;
525
526 /*
527 * rsa_public_key_file: the path to the public keyfile of the server.
528 * Used instead of passwords.
529 */
530 rsa_public_key_file = "etc/remote.server.keyfile";
531
532 /*
533 * cipher_preference: set the preferred cipher for this link
534 *
535 * Available ciphers are:
536 * BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
537 * RC5.12/128 RC5.8/128 3DES/168 DES/56
538 *
539 * NOTE: Some ciphers may not be supported by your OpenSSL.
540 * Check the output from 'configure' for available ciphers.
541 *
542 * NOTE2: To help you decide what cipher to use, tools/encspeed
543 * will show you approximately how fast each cipher is.
544 * However, blowfish is fast and secure, and is probably
545 * a good default for most situations.
546 *
547 * NOTE3: Default if none is set is BF/128
548 *
549 * The cipher *MUST* be the same in both directions. If you
550 * set a cipher preference, your uplink must set the same cipher,
551 * else it will not link.
552 */
553 # cipher_preference = "BF/168";
554 };
555
556 /*
557 * Note: Don't add an extra 'name=' entry if you use
558 * the connect "name"{} feature
559 */
560 connect "ipv6.some.server" {
561 host = "3ffd:dead:beef::1";
562 send_password = "password";
563 accept_password = "password";
564 port = 6666;
565
566 /*
567 * aftype: controls whether the connection uses "ipv4" or "ipv6".
568 * Default is ipv4.
569 */
570 aftype = ipv6;
571 class = "server";
572 };
573
574 /* cluster{}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
575 * automatically (OLD hyb6 SLAVE_SERVERS)
576 */
577 cluster {
578 /* name: the server to share with, this can take wildcards.
579 *
580 * NOTE: only local actions will be clustered, meaning if
581 * the server receives a shared kline/unkline/etc, it
582 * will not be propagated to clustered servers.
583 *
584 * Remote servers are not necessarily required to accept
585 * clustered lines, they need a shared{} for *THIS* server
586 * in order to accept them.
587 */
588 name = "*.arpa";
589
590 /*
591 * type: list of what to share, options are as follows:
592 * kline - share klines
593 * tkline - share temporary klines
594 * unkline - share unklines
595 * xline - share xlines
596 * txline - share temporary xlines
597 * unxline - share unxlines
598 * resv - share resvs
599 * tresv - share temporary resvs
600 * unresv - share unresvs
601 * locops - share locops
602 * all - share all of the above (default)
603 */
604 type = kline, unkline, locops, xline, resv;
605 };
606
607 /*
608 * shared {}: users that are allowed to remote kline (OLD U:)
609 *
610 * NOTE: This can be effectively used for remote klines.
611 * Please note that there is no password authentication
612 * for users setting remote klines. You must also be
613 * /oper'd in order to issue a remote kline.
614 */
615 shared {
616 /*
617 * name: the server the user must be on to set klines. If this is not
618 * specified, the user will be allowed to kline from all servers.
619 */
620 name = "irc2.some.server";
621
622 /*
623 * user: the user@host mask that is allowed to set klines. If this is
624 * not specified, all users on the server above will be allowed to set
625 * a remote kline.
626 */
627 user = "oper@my.host.is.spoofed";
628
629 /*
630 * type: list of what to share, options are as follows:
631 * kline - allow oper/server to kline
632 * tkline - allow temporary klines
633 * unkline - allow oper/server to unkline
634 * xline - allow oper/server to xline
635 * txline - allow temporary xlines
636 * unxline - allow oper/server to unxline
637 * resv - allow oper/server to resv
638 * tresv - allow temporary resvs
639 * unresv - allow oper/server to unresv
640 * locops - allow oper/server to locops - only used for servers that cluster
641 * all - allow oper/server to do all of the above (default)
642 */
643 type = kline, unkline, resv;
644 };
645
646 /*
647 * kill {}: users that are not allowed to connect (OLD K:)
648 * Oper issued klines will be added to the specified kline config
649 */
650 kill {
651 user = "bad@*.hacked.edu";
652 reason = "Obviously hacked account";
653 };
654
655 kill {
656 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.org$";
657 type = regex;
658 };
659
660 /*
661 * deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
662 * Oper issued dlines will be added to the specified dline config
663 */
664 deny {
665 ip = "10.0.1.0/24";
666 reason = "Reconnecting vhosted bots";
667 };
668
669 /*
670 * exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:)
671 */
672 exempt {
673 ip = "192.168.0.0/16";
674 };
675
676 /*
677 * resv {}: nicks and channels users may not use/join (OLD Q:)
678 */
679 resv {
680 /* reason: the reason for the proceeding resv's */
681 reason = "There are no services on this network";
682
683 /* resv: the nicks and channels users may not join/use */
684 nick = "nickserv";
685 nick = "chanserv";
686 channel = "#services";
687
688 /* resv: wildcard masks are also supported in nicks only */
689 reason = "Clone bots";
690 nick = "clone*";
691 };
692
693 /*
694 * gecos {}: The X: replacement, used for banning users based on their
695 * "realname".
696 */
697 gecos {
698 name = "*sex*";
699 reason = "Possible spambot";
700 };
701
702 gecos {
703 name = "sub7server";
704 reason = "Trojan drone";
705 };
706
707 gecos {
708 name = "*http*";
709 reason = "Spambot";
710 };
711
712 gecos {
713 name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
714 type = regex;
715 };
716
717 /*
718 * channel {}: The channel block contains options pertaining to channels
719 */
720 channel {
721 /*
722 * restrict_channels: reverse channel RESVs logic, only reserved
723 * channels are allowed
724 */
725 restrict_channels = no;
726
727 /*
728 * disable_local_channels: prevent users from joining &channels.
729 */
730 disable_local_channels = no;
731
732 /*
733 * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
734 * that can join a +i channel without an invite.
735 */
736 use_invex = yes;
737
738 /*
739 * use_except: Enable/disable channel mode +e, a n!u@h list of masks
740 * that can join a channel through a ban (+b).
741 */
742 use_except = yes;
743
744 /*
745 * use_knock: Allows users to request an invite to a channel that
746 * is locked somehow (+ikl). If the channel is +p or you are banned
747 * the knock will not be sent.
748 */
749 use_knock = yes;
750
751 /*
752 * knock_delay: The amount of time a user must wait between issuing
753 * the knock command.
754 */
755 knock_delay = 1 minute;
756
757 /*
758 * knock_delay_channel: How often a knock to any specific channel
759 * is permitted, regardless of the user sending the knock.
760 */
761 knock_delay_channel = 1 minute;
762
763 /*
764 * burst_topicwho: enable sending of who set topic on topicburst.
765 * default is yes
766 */
767 burst_topicwho = yes;
768
769 /*
770 * max_chans_per_user: The maximum number of channels a user can
771 * join/be on.
772 */
773 max_chans_per_user = 25;
774
775 /* quiet_on_ban: stop banned people talking in channels. */
776 quiet_on_ban = yes;
777
778 /* max_bans: maximum number of +b/e/I modes in a channel */
779 max_bans = 25;
780
781 /*
782 * how many joins in how many seconds constitute a flood, use 0 to
783 * disable. +b opers will be notified (changeable via /set)
784 */
785 join_flood_count = 16;
786 join_flood_time = 8 seconds;
787
788 /*
789 * splitcode: The ircd will now check splitmode every few seconds.
790 *
791 * Either split users or split servers can activate splitmode, but
792 * both conditions must be met for the ircd to deactivate splitmode.
793 *
794 * You may force splitmode to be permanent by /quote set splitmode on
795 */
796
797 /*
798 * default_split_user_count: when the usercount is lower than this level,
799 * consider ourselves split. This must be set for automatic splitmode.
800 */
801 default_split_user_count = 0;
802
803 /*
804 * default_split_server_count: when the servercount is lower than this,
805 * consider ourselves split. This must be set for automatic splitmode.
806 */
807 default_split_server_count = 0;
808
809 /* split no create: disallow users creating channels on split. */
810 no_create_on_split = yes;
811
812 /*
813 * no_join_on_split: disallow users joining channels at all on a split
814 */
815 no_join_on_split = no;
816 };
817
818 /*
819 * serverhide {}
820 *
821 * The serverhide block contains the options regarding serverhiding
822 */
823 serverhide {
824 /*
825 * flatten_links: this option will show all servers in /links appear
826 * that they are linked to this current server
827 */
828 flatten_links = no;
829
830 /*
831 * links_delay: how often to update the links file when it is
832 * flattened.
833 */
834 links_delay = 5 minutes;
835
836 /*
837 * hidden: hide this server from a /links output on servers that
838 * support it. this allows hub servers to be hidden etc.
839 */
840 hidden = no;
841
842 /*
843 * disable_hidden: prevent servers hiding themselves from a
844 * /links output.
845 */
846 disable_hidden = no;
847
848 /*
849 * hide_servers: hide remote servernames everywhere and instead use
850 * hidden_name and network_desc.
851 */
852 hide_servers = no;
853
854 /*
855 * Use this as the servername users see if hide_servers = yes.
856 */
857 hidden_name = "*.hidden.com";
858
859 /*
860 * hide_server_ips: If this is disabled, opers will be unable to see servers
861 * ips and will be shown a masked ip, admins will be shown the real ip.
862 *
863 * If this is enabled, nobody can see a servers ip. *This is a kludge*, it
864 * has the side effect of hiding the ips everywhere, including logfiles.
865 *
866 * We recommend you leave this disabled, and just take care with who you
867 * give admin=yes; to.
868 */
869 hide_server_ips = no;
870 };
871
872 /*
873 * general {}
874 *
875 * The general block contains many of the options that were once compiled
876 * in options in config.h. The general block is read at start time.
877 */
878 general {
879 /*
880 * disable_auth: completely disable ident lookups; if you enable this,
881 * be careful of what you set need_ident to in your auth {} blocks
882 */
883 disable_auth = no;
884
885 /*
886 * ping_cookie: require clients to respond exactly to a ping command,
887 * can help block certain types of drones and FTP PASV mode spoofing.
888 */
889 ping_cookie = no;
890
891 /*
892 * dots_in_ident: the amount of '.' characters permitted in an ident
893 * reply before the user is rejected.
894 */
895 dots_in_ident = 2;
896
897 /*
898 * dot_in_ip6_addr: ircd-hybrid-6.0 and earlier will disallow hosts
899 * without a '.' in them. this will add one to the end. only needed
900 * for older servers.
901 */
902 dot_in_ip6_addr = no;
903
904 /*
905 * short_motd: send clients a notice telling them to read the motd
906 * instead of forcing a motd to clients who may simply ignore it.
907 */
908 short_motd = no;
909
910 /*
911 * Whether to automatically set mode +i on connecting users.
912 */
913 invisible_on_connect = yes;
914
915 /* max_watch: maximum WATCH entries */
916 max_watch = 64;
917
918 /*
919 * If hide_spoof_ips is disabled, opers will be allowed to see the real IP of spoofed
920 * users in /trace etc. If this is defined they will be shown a masked IP.
921 */
922 hide_spoof_ips = yes;
923
924 /*
925 * Show "actually using host <ip>" on /whois when possible.
926 */
927 use_whois_actually = yes;
928
929 /*
930 * If you don't explicitly specify burst_away in your connect blocks, then
931 * they will default to the burst_away value below.
932 */
933 burst_away = no;
934
935 /* disable_remote_commands: disable users doing commands on remote servers */
936 disable_remote_commands = no;
937
938 /*
939 * message_locale: the default message locale
940 * Use "standard" for the compiled in defaults.
941 * To install the translated messages, go into messages/ in the
942 * source directory and run `make install'.
943 */
944 message_locale = "standard";
945
946 /* stats_o_oper only: make stats o (opers) oper only */
947 stats_o_oper_only = yes;
948
949 /* stats_P_oper_only: make stats P (ports) oper only */
950 stats_P_oper_only = yes;
951
952 /*
953 * stats_i_oper_only: make stats i (auth {}) oper only. set to:
954 * yes: show users no auth blocks, made oper only.
955 * masked: show users first matching auth block
956 * no: show users all auth blocks.
957 */
958 stats_i_oper_only = yes;
959
960 /*
961 * stats_k_oper_only: make stats k/K (klines) oper only. set to:
962 * yes: show users no auth blocks, made oper only
963 * masked: show users first matching auth block
964 * no: show users all auth blocks.
965 */
966 stats_k_oper_only = yes;
967
968 /*
969 * throttle_time: the minimum amount of time between connections from
970 * the same ip. exempt {} blocks are excluded from this throttling.
971 * Offers protection against flooders who reconnect quickly.
972 * Set to 0 to disable.
973 */
974 throttle_time = 10;
975
976 /*
977 * max_targets: the maximum amount of targets in a single
978 * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
979 */
980 max_targets = 4;
981
982 /* max_accept: maximum allowed /accept's for +g usermode */
983 max_accept = 20;
984
985 /*
986 * caller_id_wait: time between notifying a +g user that somebody
987 * is messaging them.
988 */
989 caller_id_wait = 1 minute;
990
991 /*
992 * opers_bypass_callerid: allows operators to bypass +g and message
993 * anyone who has it set (useful if you use services).
994 */
995 opers_bypass_callerid = no;
996
997 /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
998 oper_pass_resv = yes;
999
1000 /*
1001 * client_flood: maximum amount of data in a clients queue before
1002 * they are dropped for flooding.
1003 */
1004 client_flood = 2560 bytes;
1005
1006 /* no_oper_flood: increase flood limits for opers. */
1007 no_oper_flood = yes;
1008
1009 /*
1010 * true_no_oper_flood: completely eliminate flood limits for opers
1011 * and for clients with can_flood = yes in their auth {} blocks
1012 */
1013 true_no_oper_flood = yes;
1014
1015 /*
1016 * pace_wait_simple: time between use of less intensive commands
1017 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1018 */
1019 pace_wait_simple = 1 second;
1020
1021 /*
1022 * pace_wait: time between more intensive commands
1023 * (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1024 */
1025 pace_wait = 10 seconds;
1026
1027 /*
1028 * default_floodcount: the default value of floodcount that is configurable
1029 * via /quote set floodcount. This is the amount of lines a user
1030 * may send to any other user/channel in one second.
1031 */
1032 default_floodcount = 10;
1033
1034 /* anti_nick_flood: enable the nickflood control code */
1035 anti_nick_flood = yes;
1036
1037 /* nick flood: the nick changes allowed in the specified period */
1038 max_nick_time = 20 seconds;
1039 max_nick_changes = 5;
1040
1041 /*
1042 * anti_spam_exit_message_time: the minimum time a user must be connected
1043 * before custom quit messages are allowed.
1044 */
1045 anti_spam_exit_message_time = 5 minutes;
1046
1047 /*
1048 * reject_hold_time: wait this amount of time before disconnecting
1049 * a rejected client. Use 0 to disable.
1050 */
1051 reject_hold_time = 0;
1052
1053 /*
1054 * idletime: the maximum amount of time a user may idle before
1055 * they are disconnected
1056 */
1057 idletime = 0;
1058
1059 /* REMOVE ME. The following line checks you've been reading. */
1060 havent_read_conf = 1;
1061
1062 /*
1063 * usermodes configurable: a list of usermodes for the options below
1064 *
1065 * +b - bots - See bot and drone flooding notices
1066 * +c - cconn - Client connection/quit notices
1067 * +D - deaf - Don't receive channel messages
1068 * +d - debug - See debugging notices
1069 * +f - full - See I: line full notices
1070 * +G - softcallerid - Server Side Ignore for users not on your channels
1071 * +g - callerid - Server Side Ignore (for privmsgs etc)
1072 * +i - invisible - Not shown in NAMES or WHO unless you share a
1073 * a channel
1074 * +k - skill - See server generated KILL messages
1075 * +l - locops - See LOCOPS messages
1076 * +n - nchange - See client nick changes
1077 * +r - rej - See rejected client notices
1078 * +s - servnotice - See general server notices
1079 * +u - unauth - See unauthorized client notices
1080 * +w - wallop - See server generated WALLOPS
1081 * +x - external - See remote server connection and split notices
1082 * +y - spy - See LINKS, STATS, TRACE notices etc.
1083 * +z - operwall - See oper generated WALLOPS
1084 */
1085
1086 /* oper_only_umodes: usermodes only opers may set */
1087 oper_only_umodes = bots, cconn, debug, full, skill, nchange,
1088 rej, spy, external, operwall, locops, unauth;
1089
1090 /* oper_umodes: default usermodes opers get when they /oper */
1091 oper_umodes = bots, locops, servnotice, operwall, wallop;
1092
1093 /*
1094 * Max time from the nickname change that still causes KILL
1095 * automatically to switch for the current nick of that user. (seconds)
1096 */
1097 kill_chase_time_limit = 90;
1098
1099 /*
1100 * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1101 * placed via the server. klines hand placed are exempt from limits.
1102 * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1103 */
1104 min_nonwildcard = 4;
1105
1106 /*
1107 * min_nonwildcard_simple: the minimum non wildcard characters in
1108 * gecos bans. wildcard chars: '*' '?' '#'
1109 */
1110 min_nonwildcard_simple = 3;
1111
1112 /*
1113 * gline_min_cidr: the minimum required length of a CIDR bitmask
1114 * for IPv4 based glines
1115 */
1116 gline_min_cidr = 16;
1117
1118 /*
1119 * gline_min_cidr6: the minimum required length of a CIDR bitmask
1120 * for IPv6 based glines
1121 */
1122 gline_min_cidr6 = 48;
1123
1124 /*
1125 * kline_with_reason: show the user the reason why they are k/d/glined
1126 * on exit. May give away who set k/dline when set via tcm.
1127 */
1128 kline_with_reason = yes;
1129
1130 /*
1131 * kline_reason: show this message to users on channel
1132 * instead of the oper reason.
1133 */
1134 kline_reason = "Connection closed";
1135
1136 /*
1137 * Disable temporary kline/xline expire notices yes/no
1138 */
1139 tkline_expire_notices = no;
1140
1141 /*
1142 * failed_oper_notice: send a notice to all opers on the server when
1143 * someone tries to OPER and uses the wrong password, host or ident.
1144 */
1145 failed_oper_notice = yes;
1146
1147 /*
1148 * warn_no_nline: warn opers about servers that try to connect but
1149 * we don't have a connect {} block for. Twits with misconfigured
1150 * servers can get really annoying with this enabled.
1151 */
1152 warn_no_nline = yes;
1153
1154 /*
1155 * Ignore bogus timestamps from other servers. Yes, this will desync
1156 * the network, but it will allow chanops to resync with a valid non TS 0
1157 *
1158 * This should be enabled network wide, or not at all.
1159 */
1160 ignore_bogus_ts = no;
1161
1162 /*
1163 * ts delta: the time delta allowed between server clocks before
1164 * a warning is given, or before the link is dropped. all servers
1165 * should run ntpdate/rdate to keep clocks in sync
1166 */
1167 ts_warn_delta = 30 seconds;
1168 ts_max_delta = 5 minutes;
1169
1170 /*
1171 * servlink_path: path to 'servlink' program used by ircd to handle
1172 * encrypted/compressed server <-> server links.
1173 *
1174 * only define if servlink is not in same directory as ircd itself.
1175 */
1176 #servlink_path = "/usr/local/ircd/bin/servlink";
1177
1178 /*
1179 * default_cipher_preference: default cipher to use for cryptlink when none is
1180 * specified in connect block.
1181 */
1182 #default_cipher_preference = "BF/168";
1183
1184 /*
1185 * use_egd: if your system does not have *random devices yet you
1186 * want to use OpenSSL and encrypted links, enable this. Beware -
1187 * EGD is *very* CPU intensive when gathering data for its pool
1188 */
1189 #use_egd = yes;
1190
1191 /*
1192 * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1193 * which automatically finds the path.
1194 */
1195 #egdpool_path = "/var/run/egd-pool";
1196
1197 /*
1198 * compression_level: level of compression for compressed links between
1199 * servers.
1200 *
1201 * values are between: 1 (least compression, fastest)
1202 * and: 9 (most compression, slowest).
1203 */
1204 #compression_level = 6;
1205 };
1206
1207 glines {
1208 /* enable: enable glines, network wide temp klines */
1209 enable = yes;
1210
1211 /* duration: the amount of time a gline will remain on your server before expiring */
1212 duration = 1 day;
1213
1214 /* logging: which types of rules you want to log when triggered (choose reject or block) */
1215 logging = reject, block;
1216
1217 /*
1218 * NOTE: gline ACLs can cause a desync of glines throughout the
1219 * network, meaning some servers may have a gline triggered, and
1220 * others may not. Also, you only need insert rules for glines
1221 * that you want to block and/or reject. If you want to accept and
1222 * propagate the gline, do NOT put a rule for it.
1223 */
1224
1225 /* user@host for rule to apply to */
1226 user = "user@chuck.norris.never.sleeps";
1227 /* server for rule to apply to */
1228 name = "hades.arpa";
1229
1230 /*
1231 * action: action to take when a matching gline is found. options are:
1232 * reject - do not apply the gline locally
1233 * block - do not propagate the gline
1234 */
1235 action = reject, block;
1236
1237 user = "user@*";
1238 name = "*";
1239 action = block;
1240 };
1241
1242 modules {
1243 /*
1244 * path: other paths to search for modules specified below
1245 * and in /modload.
1246 */
1247 path = "/usr/local/ircd/modules";
1248 path = "/usr/local/ircd/modules/autoload";
1249
1250 /* module: the name of a module to load on startup/rehash */
1251 #module = "some_module.so";
1252 };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28