/[svn]/ircd-hybrid/etc/example.conf
ViewVC logotype

Contents of /ircd-hybrid/etc/example.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 30 - (show annotations)
Sun Oct 2 20:03:27 2005 UTC (15 years, 2 months ago) by adx
File size: 33621 byte(s)
- imported sources
- can be moved later according to the directory/branching scheme,
  but we need the svn up

1 /* doc/example.conf - ircd-hybrid-7 Example configuration file
2 * Copyright (C) 2000-2005 Hybrid Development Team
3 *
4 * Written by ejb, wcampbel, db, leeh and others
5 * Other example configurations can be found in the source dir under
6 * etc/.
7 *
8 * $Id: example.conf,v 1.91 2005/09/29 13:55:18 knight Exp $
9 */
10
11 /* IMPORTANT NOTES:
12 *
13 * auth {} blocks MUST be specified in order of precedence. The first one
14 * that matches a user will be used. So place spoofs first, then specials,
15 * then general access.
16 *
17 * Shell style (#), C++ style (//) and C style comments are supported.
18 *
19 * Files may be included by either:
20 * .include "filename"
21 * .include <filename>
22 *
23 * Times/durations are written as:
24 * 12 hours 30 minutes 1 second
25 *
26 * Valid units of time:
27 * month, week, day, hour, minute, second
28 *
29 * Valid units of size:
30 * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31 *
32 * Sizes and times may be singular or plural.
33 */
34
35 /* EFNET NOTE:
36 *
37 * This config file is NOT suitable for EFNet. EFNet admins should use
38 * example.efnet.conf
39 */
40
41 /* serverinfo {}: Contains information about the server. (OLD M:) */
42 serverinfo {
43 /* name: the name of our server */
44 name = "hades.arpa";
45
46 /*
47 * A server's unique ID. This is three characters long and must be in
48 * the form [0-9][A-Z0-9][A-Z0-9]. The first character must be a
49 * digit, followed by 2 alpha-numerical letters.
50 * Note: The letters must be capitalized.
51 */
52 sid = "_CHANGE_ME_";
53
54 /*
55 * description: the description of the server. '[' and ']' may not
56 * be used here for compatibility with older servers.
57 */
58 description = "hybrid-7 test server";
59
60 /*
61 * network info: the name and description of the network this server
62 * is on. Shown in the 005 reply and used with serverhiding.
63 */
64 network_name = "MyNet";
65 network_desc = "This is My Network";
66
67 /*
68 * hub: allow this server to act as a hub and have multiple servers
69 * connected to it. This may not be changed if there are active
70 * LazyLink servers.
71 */
72 hub = no;
73
74 /*
75 * vhost: the IP to bind to when we connect outward to ipv4 servers.
76 * This should be an ipv4 IP only, or "* for INADDR_ANY.
77 */
78 #vhost = "192.169.0.1";
79
80 /*
81 * vhost6: the IP to bind to when we connect outward to ipv6 servers.
82 * This should be an ipv6 IP only, or "* for INADDR_ANY.
83 */
84 #vhost6 = "3ffe:80e8:546::2";
85
86 /* max_clients: the maximum number of clients allowed to connect */
87 max_clients = 512;
88
89 /*
90 * rsa key: the path to the file containing our rsa key for cryptlink.
91 *
92 * Example command to store a 2048 bit RSA keypair in
93 * rsa.key, and the public key in rsa.pub:
94 *
95 * openssl genrsa -out rsa.key 2048
96 * openssl rsa -in rsa.key -pubout -out rsa.pub
97 * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
98 * chmod 0600 rsa.key
99 * chmod 0644 rsa.pub
100 */
101 #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
102
103 /*
104 * ssl certificate: the path to the file containing our ssl certificate
105 * for encrypted client connection.
106 *
107 * This assumes your private RSA key is stored in rsa.key. You
108 * MUST have an RSA key in order to generate the certificate
109 *
110 * openssl req -new -days 3652 -x509 -key rsa.key -out cert.pem
111 *
112 * See http://www.openssl.org/docs/HOWTO/certificates.txt
113 *
114 * Please use the following values when generating the cert
115 *
116 * Organization Name: Network Name
117 * Organization Unit Name: changme.someirc.net
118 * Common Name: irc.someirc.net
119 * E-mail: you@domain.com
120 */
121 #ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
122 };
123
124 /* admin {}: contains admin information about the server. (OLD A:) */
125 admin {
126 name = "Smurf target";
127 description = "Main Server Administrator";
128 email = "<syn@packets.r.us>";
129 };
130
131 /* logging {}: contains information about logfiles. */
132 logging {
133 /* Do you want to enable logging to ircd.log? */
134 use_logging = yes;
135
136 /*
137 * logfiles: the logfiles to use for user connects, /oper uses,
138 * and failed /oper. These files must exist for logging to be used.
139 */
140 fuserlog = "logs/userlog";
141 foperlog = "logs/operlog";
142 fkilllog = "logs/kill";
143 fklinelog = "logs/kline";
144 fglinelog = "logs/gline";
145
146 /*
147 * log level: the amount of detail to log in ircd.log. The
148 * higher, the more information is logged. May be changed
149 * once the server is running via /quote SET LOG. Either:
150 * L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
151 */
152 log_level = L_INFO;
153 };
154
155 /* log is a synonym for logging
156 * fname_userlog is a synonym for fuserlog
157 * fname_operlog is a synonym for foperlog
158 * fname_killlog is a synonym for fkilllog
159 * fname_glinelog is a synonym for fglinelog
160 *
161 * hence this is equivalent to the above
162 */
163 log {
164 fname_userlog = "logs/userlog";
165 fname_operlog = "logs/operlog";
166 fname_killlog = "logs/kill";
167 fname_klinelog = "logs/kline";
168 fname_glinelog = "logs/gline";
169 log_level = L_INFO;
170 };
171
172 /* class {}: contain information about classes for users (OLD Y:) */
173 class {
174 /* name: the name of the class. classes are text now */
175 name = "users";
176
177 /*
178 * ping_time: how often a client must reply to a PING from the
179 * server before they are dropped.
180 */
181 ping_time = 2 minutes;
182
183 /* how many local users are allowed to connect from one IP */
184 number_per_ip = 2;
185
186 /* how many local users are allowed to connect from one ident@host */
187 max_local = 2;
188
189 /* network-wide limit of users per ident@host */
190 max_global = 10;
191
192 /* max_number: the maximum number of users allowed in this class */
193 max_number = 100;
194
195 /*
196 * sendq: the amount of data allowed in a clients queue before
197 * they are dropped.
198 */
199 sendq = 100 kbytes;
200 };
201
202 class {
203 name = "opers";
204 ping_time = 5 minutes;
205 number_per_ip = 10;
206 max_number = 100;
207 sendq = 100kbytes;
208 };
209
210 class {
211 name = "server";
212 ping_time = 5 minutes;
213
214 /*
215 * ping_warning: how fast a server must reply to a PING before
216 * a warning to opers is generated.
217 */
218 ping_warning = 15 seconds;
219
220 /*
221 * connectfreq: only used in server classes. Specifies the delay
222 * between autoconnecting to servers.
223 */
224 connectfreq = 5 minutes;
225
226 /* max number: the amount of servers to autoconnect to */
227 max_number = 1;
228
229 /* sendq: servers need a higher sendq as they send more data */
230 sendq = 2 megabytes;
231 };
232
233 /* listen {}: contain information about the ports ircd listens on (OLD P:) */
234 listen {
235 /*
236 * port: the specific port to listen on. If no host is specified
237 * before, it will listen on all available IPs.
238 *
239 * Ports are separated via a comma, a range may be specified using ".."
240 */
241
242 /* port: listen on all available IPs, ports 6665 to 6669 */
243 port = 6665 .. 6669;
244
245 /*
246 * Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
247 * unless you are an administrator.
248 *
249 * NOTE: The "flags" directive has to come before "port". Always!
250 */
251 flags = hidden, ssl;
252 host = "192.168.0.1";
253 port = 6697;
254
255 /*
256 * host: set a specific IP/host the ports after the line will listen
257 * on. This may be ipv4 or ipv6.
258 */
259 host = "1.2.3.4";
260 port = 7000, 7001;
261
262 host = "3ffe:1234:a:b:c::d";
263 port = 7002;
264 };
265
266 /* auth {}: allow users to connect to the ircd (OLD I:) */
267 auth {
268 /*
269 * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
270 * lines are permitted per auth block.
271 */
272 user = "*@172.16.0.0/12";
273 user = "*test@123D:B567:*";
274
275 /* password: an optional password that is required to use this block */
276 password = "letmein";
277
278 /*
279 * encrypted: controls whether the auth password above has been
280 * encrypted.
281 */
282 encrypted = yes;
283
284 /*
285 * spoof: fake the users host to this. This is free-form,
286 * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
287 */
288 spoof = "I.still.hate.packets";
289
290 /* class: the class the user is placed in */
291 class = "opers";
292
293 /*
294 * need_password: don't allow users who haven't supplied the correct
295 * password to connect using another auth{} block
296 * ('&' prefix on /stats I if disabled)
297 * need_ident: require the user to have identd to connect ('+' prefix on /stats I)
298 * spoof_notice: enable spoofing notification to admins
299 * exceed_limit: allow a user to exceed class limits ('>' prefix on /stats I)
300 * kline_exempt: exempt this user from k/glines ('^' prefix on /stats I)
301 * gline_exempt: exempt this user from glines ('_' prefix on /stats I)
302 * resv_exempt: exempt this user from resvs ('$' prefix on /stats I)
303 * no_tilde: remove ~ from a user with no ident ('-' prefix on /stats I)
304 * can_flood: allow this user to exceed flood limits ('|' prefix on /stats I)
305 * can_idle: exempt this use from idle restrictions ('<' prefix on /stats I)
306 */
307 flags = need_password, spoof_notice, exceed_limit, kline_exempt,
308 gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
309 };
310
311 auth {
312 /*
313 * redirect: the server and port to redirect a user to. A user does
314 * not have to obey the redirection, the ircd just suggests an alternative
315 * server for them.
316 */
317 redirserv = "irc.fi";
318 redirport = 6667;
319
320 user = "*.fi";
321
322 /* class: a class is required even though it is not used */
323 class = "users";
324 };
325
326 auth {
327 user = "*@*";
328 class = "users";
329 flags = need_ident;
330 };
331
332 /* operator {}: defines ircd operators. (OLD O:)
333 * ircd-hybrid no longer supports local operators, privileges are
334 * controlled via flags.
335 */
336 operator {
337 /* name: the name of the oper */
338 /* Note: operator "opername"{} is also supported */
339 name = "god";
340
341 /*
342 * user: the user@host required for this operator. CIDR is not
343 * supported. Multiple user="" lines are supported.
344 */
345 user = "*god@*";
346 user = "*@127.0.0.1";
347
348 /*
349 * password: the password required to oper. By default this will
350 * need to be encrypted using 'mkpasswd'. MD5 is supported.
351 */
352 password = "etcnjl8juSU1E";
353
354 /*
355 * encrypted: controls whether the oper password above has been
356 * encrypted. (OLD CRYPT_OPER_PASSWORD now optional per operator)
357 */
358 encrypted = yes;
359
360 /*
361 * rsa_public_key_file: the public key for this oper when using Challenge.
362 * A password should not be defined when this is used, see
363 * doc/challenge.txt for more information.
364 */
365 # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
366
367 /* class: the class the oper joins when they successfully /oper */
368 class = "opers";
369
370 /*
371 * privileges: controls the activities and commands an oper is
372 * allowed to do on the server. All options default to no.
373 * Available options:
374 *
375 * global_kill: allows remote users to be /KILL'd (OLD 'O' flag)
376 * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
377 * remoteban: allows remote KLINE/UNKLINE
378 * kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
379 * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
380 * gline: allows GLINE (OLD 'G' flag)
381 * xline: allows XLINE (OLD 'X' flag)
382 * operwall: allows OPERWALL
383 * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
384 * via usermode +n
385 * rehash: allows oper to REHASH config (OLD 'H' flag)
386 * die: allows DIE and RESTART (OLD 'D' flag)
387 * admin: gives admin privileges. admins
388 * may (un)load modules and see the
389 * real IPs of servers.
390 * hidden_admin: same as 'admin', but noone can recognize you as
391 * being an admin
392 * hidden_oper: not shown in /stats p (except for other operators)
393 */
394 /* You can either use
395 * die = yes;
396 * rehash = yes;
397 *
398 * or in a flags statement i.e.
399 * flags = die, rehash;
400 *
401 * You can also negate a flag with ~ i.e.
402 * flags = ~remote;
403 *
404 */
405 flags = global_kill, remote, kline, unkline, xline,
406 die, rehash, nick_changes, admin, operwall;
407 };
408
409 /* connect {}: controls servers we connect to (OLD C:, N:, H:, L:) */
410 connect {
411 /* name: the name of the server */
412 name = "irc.uplink.com";
413
414 /*
415 * host: the host or IP to connect to. If a hostname is used it
416 * must match the reverse dns of the server.
417 */
418 host = "192.168.0.1";
419
420 /*
421 * passwords: the passwords we send (OLD C:) and accept (OLD N:).
422 * The remote server will have these passwords reversed.
423 */
424 send_password = "password";
425 accept_password = "anotherpassword";
426
427 /*
428 * encrypted: controls whether the accept_password above has been
429 * encrypted. (OLD CRYPT_LINK_PASSWORD now optional per connect)
430 */
431 encrypted = no;
432
433 /* port: the port to connect to this server on */
434 port = 6666;
435
436 /*
437 * hub_mask: the mask of servers that this server may hub. Multiple
438 * entries are permitted
439 */
440 hub_mask = "*";
441
442 /*
443 * leaf_mask: the mask of servers this server may not hub. Multiple
444 * entries are permitted. Useful for forbidding EU -> US -> EU routes.
445 */
446 # leaf_mask = "*.uk";
447
448 /* masking: the servername we pretend to be when we connect */
449 # fakename = "*.arpa";
450
451 /* class: the class this server is in */
452 class = "server";
453
454 /*
455 * autoconnect: controls whether we autoconnect to this server or not,
456 * dependent on class limits. By default, this is disabled.
457 * compressed: controls whether traffic is compressed via ziplinks.
458 * By default, this is disabled
459 * lazylink: controls whether this server is a LazyLink. LazyLink
460 * servers may NOT hub. See doc/LazyLinks.txt
461 * cryptlink: enable full encryption for all data passing between our
462 * server and this link and rsa authentication.
463 * burst_away: This will send the /away string that users have set
464 * on the server burst. Note this can be a lot of data
465 * and slow down your server burst.
466 */
467 # flags = autoconn, lazylink, compressed, cryptlink, burst_away;
468 };
469
470 connect {
471 name = "encrypted.auth.example";
472 host = "some.host.somewhere";
473 port = 6667;
474
475 flags = cryptlink;
476
477 /*
478 * rsa_public_key_file: the path to the public keyfile of the server.
479 * Used instead of passwords.
480 */
481 rsa_public_key_file = "etc/remote.server.keyfile";
482
483 /*
484 * cipher preference: set the preferred cipher for this link
485 *
486 * Available ciphers are:
487 * BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
488 * RC5.12/128 RC5.8/128 3DES/168 DES/56
489 *
490 * NOTE: Some ciphers may not be supported by your OpenSSL.
491 * Check the output from 'configure' for available ciphers.
492 *
493 * NOTE2: To help you decide what cipher to use, tools/encspeed
494 * will show you approximately how fast each cipher is.
495 * However, blowfish is fast and secure, and is probably
496 * a good default for most situations.
497 *
498 * NOTE3: Default if none is set is BF/128
499 *
500 * The cipher *MUST* be the same in both directions. If you
501 * set a cipher preference, your uplink must set the same cipher,
502 * else it will not link.
503 */
504 # cipher_preference = "BF/168";
505 };
506
507 /*
508 * Note: Don't add an extra 'name=' entry if you use
509 * the connect "name"{} feature
510 */
511 connect "ipv6.some.server" {
512 host = "3ffd:dead:beef::1";
513 send_password = "password";
514 accept_password = "password";
515 port = 6666;
516
517 /*
518 * aftype: controls whether the connection uses "ipv4" or "ipv6".
519 * Default is ipv4.
520 */
521 aftype = ipv6;
522 class = "server";
523 };
524
525 /* cluster{}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
526 * automatically (OLD hyb6 SLAVE_SERVERS)
527 */
528 cluster {
529 /* name: the server to share with, this can take wildcards */
530 /* NOTE: only local actions will be clustered, meaning if
531 * the server receives a shared kline/unkline/etc, it
532 * will not be propagated to clustered servers.
533 *
534 * Remote servers are not necessarily required to accept
535 * clustered lines, they need a shared{} for *THIS* server
536 * in order to accept them.
537 */
538 name = "*.arpa";
539
540 /*
541 * type: list of what to share, options are as follows:
542 * kline - share klines
543 * tkline - share temporary klines
544 * unkline - share unklines
545 * xline - share xlines
546 * txline - share temporary xlines
547 * unxline - share unxlines
548 * resv - share resvs
549 * tresv - share temporary resvs
550 * unresv - share unresvs
551 * locops - share locops
552 * all - share all of the above (default)
553 */
554 type = kline, unkline, locops, xline, resv;
555 };
556
557 /* shared {}: users that are allowed to remote kline (OLD U:) */
558 shared {
559 /*
560 * name: the server the user must be on to set klines. If this is not
561 * specified, the user will be allowed to kline from all servers.
562 */
563 name = "irc2.some.server";
564
565 /*
566 * user: the user@host mask that is allowed to set klines. If this is
567 * not specified, all users on the server above will be allowed to set
568 * a remote kline.
569 */
570 user = "oper@my.host.is.spoofed";
571
572 /*
573 * type: list of what to share, options are as follows:
574 * kline - allow oper/server to kline
575 * tkline - allow temporary klines
576 * unkline - allow oper/server to unkline
577 * xline - allow oper/server to xline
578 * txline - allow temporary xlines
579 * unxline - allow oper/server to unxline
580 * resv - allow oper/server to resv
581 * tresv - allow temporary resvs
582 * unresv - allow oper/server to unresv
583 * locops - allow oper/server to locops - only used for servers that cluster
584 * all - allow oper/server to do all of the above (default)
585 */
586 type = kline, unkline, resv;
587 };
588
589 /* kill {}: users that are not allowed to connect (OLD K:)
590 * Oper issued klines will be added to the specified kline config
591 */
592 kill {
593 user = "bad@*.hacked.edu";
594 reason = "Obviously hacked account";
595 };
596
597 kill {
598 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.org$";
599 type = regex;
600 };
601
602 /* deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
603 * Oper issued dlines will be added to the specified dline config
604 */
605 deny {
606 ip = "10.0.1.0/24";
607 reason = "Reconnecting vhosted bots";
608 };
609
610 /* exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:) */
611 exempt {
612 ip = "192.168.0.0/16";
613 };
614
615 /* resv {}: nicks and channels users may not use/join (OLD Q:) */
616 resv {
617 /* reason: the reason for the proceeding resv's */
618 reason = "There are no services on this network";
619
620 /* resv: the nicks and channels users may not join/use */
621 nick = "nickserv";
622 nick = "chanserv";
623 channel = "#services";
624
625 /* resv: wildcard masks are also supported in nicks only */
626 reason = "Clone bots";
627 nick = "clone*";
628 };
629
630 /* gecos {}: The X: replacement, used for banning users based on their
631 * "realname".
632 */
633 gecos {
634 name = "*sex*";
635 reason = "Possible spambot";
636 };
637
638 gecos {
639 name = "sub7server";
640 reason = "Trojan drone";
641 };
642
643 gecos {
644 name = "*http*";
645 reason = "Spambot";
646 };
647
648 gecos {
649 name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
650 type = regex;
651 };
652
653 /*
654 * channel {}
655 *
656 * The channel block contains options pertaining to channels
657 */
658 channel {
659 /* restrict_channels: reverse channel RESVs logic, only reserved
660 * channels are allowed */
661 restrict_channels = no;
662
663 /*
664 * disable_local_channels: prevent users from joining &channels.
665 */
666 disable_local_channels = no;
667
668 /*
669 * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
670 * that can join a +i channel without an invite.
671 */
672 use_invex = yes;
673
674 /*
675 * use_except: Enable/disable channel mode +e, a n!u@h list of masks
676 * that can join a channel through a ban (+b).
677 */
678 use_except = yes;
679
680 /*
681 * use_knock: Allows users to request an invite to a channel that
682 * is locked somehow (+ikl). If the channel is +p or you are banned
683 * the knock will not be sent.
684 */
685 use_knock = yes;
686
687 /*
688 * knock_delay: The amount of time a user must wait between issuing
689 * the knock command.
690 */
691 knock_delay = 5 minutes;
692
693 /*
694 * knock_delay_channel: How often a knock to any specific channel
695 * is permitted, regardless of the user sending the knock.
696 */
697 knock_delay_channel = 1 minute;
698
699 /*
700 * invite_ops_only: Restrict /invite to ops/halfops on channels,
701 * rather than allowing unopped users to invite people to a -i channel.
702 */
703 invite_ops_only = yes;
704
705 /* max chans: The maximum number of channels a user can join/be on. */
706 max_chans_per_user = 15;
707
708 /* quiet_on_ban: stop banned people talking in channels. */
709 quiet_on_ban = yes;
710
711 /* max_bans: maximum number of +b/e/I modes in a channel */
712 max_bans = 25;
713
714 /*
715 * splitcode: The ircd will now check splitmode every few seconds.
716 *
717 * Either split users or split servers can activate splitmode, but
718 * both conditions must be met for the ircd to deactivate splitmode.
719 *
720 * You may force splitmode to be permanent by /quote set splitmode on
721 */
722
723 /*
724 * default_split_user_count: when the usercount is lower than this level,
725 * consider ourselves split. This must be set for automatic splitmode.
726 */
727 default_split_user_count = 0;
728
729 /*
730 * default_split_server_count: when the servercount is lower than this,
731 * consider ourselves split. This must be set for automatic splitmode.
732 */
733 default_split_server_count = 0;
734
735 /* split no create: disallow users creating channels on split. */
736 no_create_on_split = yes;
737
738 /* split: no join: disallow users joining channels at all on a split */
739 no_join_on_split = no;
740
741 /* burst topicwho: enable sending of who set topic on topicburst */
742 /* default is yes */
743 burst_topicwho = yes;
744
745 /* how many joins in how many seconds constitute a flood, use
746 * 0 to disable. +b opers will be notified (changeable via /set) */
747 join_flood_count = 16;
748 join_flood_time = 8 seconds;
749 };
750
751 /*
752 * serverhide {}
753 *
754 * The serverhide block contains the options regarding serverhiding
755 */
756 serverhide {
757 /*
758 * flatten_links: this option will show all servers in /links appear
759 * that they are linked to this current server
760 */
761 flatten_links = no;
762
763 /*
764 * links_delay: how often to update the links file when it is
765 * flattened.
766 */
767 links_delay = 5 minutes;
768
769 /*
770 * hidden: hide this server from a /links output on servers that
771 * support it. this allows hub servers to be hidden etc.
772 */
773 hidden = no;
774
775 /*
776 * disable_hidden: prevent servers hiding themselves from a
777 * /links output.
778 */
779 disable_hidden = no;
780
781 /*
782 * hide_servers: hide remote servernames everywhere and instead use
783 * hidden_name and network_desc.
784 */
785 hide_servers = no;
786
787 /*
788 * Use this as the servername users see if hide_servers = yes.
789 */
790 hidden_name = "*.hidden.com";
791
792 /*
793 * hide_server_ips: If this is disabled, opers will be unable to see servers
794 * ips and will be shown a masked ip, admins will be shown the real ip.
795 *
796 * If this is enabled, nobody can see a servers ip. *This is a kludge*, it
797 * has the side effect of hiding the ips everywhere, including logfiles.
798 *
799 * We recommend you leave this disabled, and just take care with who you
800 * give admin=yes; to.
801 */
802 hide_server_ips = no;
803 };
804
805 /*
806 * general {}
807 *
808 * The general block contains many of the options that were once compiled
809 * in options in config.h. The general block is read at start time.
810 */
811 general {
812 /*
813 * gline_min_cidr: the minimum required length of a CIDR bitmask
814 * for IPv4 based glines
815 */
816 gline_min_cidr = 16;
817
818 /*
819 * gline_min_cidr6: the minimum required length of a CIDR bitmask
820 * for IPv6 based glines
821 */
822 gline_min_cidr6 = 48;
823
824 /*
825 * Whether to automatically set mode +i on connecting users.
826 */
827 invisible_on_connect = yes;
828
829 /*
830 * If you don't explicitly specify burst_away in your connect blocks, then
831 * they will default to the burst_away value below.
832 */
833 burst_away = no;
834
835 /*
836 * Show "actually using host <ip>" on /whois when possible.
837 */
838 use_whois_actually = yes;
839
840 /*
841 * Max time from the nickname change that still causes KILL
842 * automatically to switch for the current nick of that user. (seconds)
843 */
844 kill_chase_time_limit = 90;
845
846 /*
847 * If hide_spoof_ips is disabled, opers will be allowed to see the real IP of spoofed
848 * users in /trace etc. If this is defined they will be shown a masked IP.
849 */
850 hide_spoof_ips = yes;
851
852 /*
853 * Ignore bogus timestamps from other servers. Yes, this will desync
854 * the network, but it will allow chanops to resync with a valid non TS 0
855 *
856 * This should be enabled network wide, or not at all.
857 */
858 ignore_bogus_ts = no;
859
860 /*
861 * disable_auth: completely disable ident lookups; if you enable this,
862 * be careful of what you set need_ident to in your auth {} blocks
863 */
864 disable_auth = no;
865
866 /* disable_remote_commands: disable users doing commands on remote servers */
867 disable_remote_commands = no;
868
869 /*
870 * Disable temporary kline/xline expire notices yes/no
871 */
872 tkline_expire_notices = no;
873
874 /*
875 * default_floodcount: the default value of floodcount that is configurable
876 * via /quote set floodcount. This is the amount of lines a user
877 * may send to any other user/channel in one second.
878 */
879 default_floodcount = 10;
880
881 /*
882 * failed_oper_notice: send a notice to all opers on the server when
883 * someone tries to OPER and uses the wrong password, host or ident.
884 */
885 failed_oper_notice = yes;
886
887 /*
888 * dots_in_ident: the amount of '.' characters permitted in an ident
889 * reply before the user is rejected.
890 */
891 dots_in_ident = 2;
892
893 /*
894 * dot_in_ip6_addr: ircd-hybrid-6.0 and earlier will disallow hosts
895 * without a '.' in them. this will add one to the end. only needed
896 * for older servers.
897 */
898 dot_in_ip6_addr = yes;
899
900 /*
901 * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
902 * placed via the server. klines hand placed are exempt from limits.
903 * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
904 */
905 min_nonwildcard = 4;
906
907 /*
908 * min_nonwildcard_simple: the minimum non wildcard characters in
909 * gecos bans. wildcard chars: '*' '?' '#'
910 */
911 min_nonwildcard_simple = 3;
912
913 /* max_accept: maximum allowed /accept's for +g usermode */
914 max_accept = 20;
915
916 /* anti_nick_flood: enable the nickflood control code */
917 anti_nick_flood = yes;
918
919 /* nick flood: the nick changes allowed in the specified period */
920 max_nick_time = 20 seconds;
921 max_nick_changes = 5;
922
923 /*
924 * anti_spam_exit_message_time: the minimum time a user must be connected
925 * before custom quit messages are allowed.
926 */
927 anti_spam_exit_message_time = 5 minutes;
928
929 /*
930 * ts delta: the time delta allowed between server clocks before
931 * a warning is given, or before the link is dropped. all servers
932 * should run ntpdate/rdate to keep clocks in sync
933 */
934 ts_warn_delta = 30 seconds;
935 ts_max_delta = 5 minutes;
936
937 /*
938 * kline_with_reason: show the user the reason why they are k/d/glined
939 * on exit. May give away who set k/dline when set via tcm.
940 */
941 kline_with_reason = yes;
942
943 /*
944 * kline_reason: show this message to users on channel
945 * instead of the oper reason.
946 */
947 kline_reason = "Connection closed";
948
949 /*
950 * reject_hold_time: wait this amount of time before disconnecting
951 * a rejected client. Use 0 to disable.
952 */
953 reject_hold_time = 0;
954
955 /*
956 * warn_no_nline: warn opers about servers that try to connect but
957 * we don't have a connect {} block for. Twits with misconfigured
958 * servers can get really annoying with this enabled.
959 */
960 warn_no_nline = yes;
961
962 /* stats_o_oper only: make stats o (opers) oper only */
963 stats_o_oper_only = yes;
964
965 /* stats_P_oper_only: make stats P (ports) oper only */
966 stats_P_oper_only = no;
967
968 /*
969 * stats i oper only: make stats i (auth {}) oper only. set to:
970 * yes: show users no auth blocks, made oper only.
971 * masked: show users first matching auth block
972 * no: show users all auth blocks.
973 */
974 stats_i_oper_only = masked;
975
976 /*
977 * stats_k_oper_only: make stats k/K (klines) oper only. set to:
978 * yes: show users no auth blocks, made oper only
979 * masked: show users first matching auth block
980 * no: show users all auth blocks.
981 */
982 stats_k_oper_only = masked;
983
984 /*
985 * caller_id_wait: time between notifying a +g user that somebody
986 * is messaging them.
987 */
988 caller_id_wait = 1 minute;
989
990 /*
991 * opers_bypass_callerid: allows operators to bypass +g and message
992 * anyone who has it set (useful if you use services).
993 */
994 opers_bypass_callerid = no;
995
996 /*
997 * pace_wait_simple: time between use of less intensive commands
998 * (HELP, remote WHOIS, WHOWAS)
999 */
1000 pace_wait_simple = 1 second;
1001
1002 /*
1003 * pace_wait: time between more intensive commands
1004 * (ADMIN, INFO, LIST, LUSERS, MOTD, STATS, VERSION)
1005 */
1006 pace_wait = 10 seconds;
1007
1008 /*
1009 * short_motd: send clients a notice telling them to read the motd
1010 * instead of forcing a motd to clients who may simply ignore it.
1011 */
1012 short_motd = no;
1013
1014 /*
1015 * ping_cookie: require clients to respond exactly to a ping command,
1016 * can help block certain types of drones and FTP PASV mode spoofing.
1017 */
1018 ping_cookie = no;
1019
1020 /* no_oper_flood: increase flood limits for opers. */
1021 no_oper_flood = yes;
1022
1023 /*
1024 * true_no_oper_flood: completely eliminate flood limits for opers
1025 * and for clients with can_flood = yes in their auth {} blocks
1026 */
1027 true_no_oper_flood = yes;
1028
1029 /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1030 oper_pass_resv = yes;
1031
1032 /*
1033 * idletime: the maximum amount of time a user may idle before
1034 * they are disconnected
1035 */
1036 idletime = 0;
1037
1038 /* REMOVE ME. The following line checks you've been reading. */
1039 havent_read_conf = 1;
1040
1041 /*
1042 * max_targets: the maximum amount of targets in a single
1043 * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1044 */
1045 max_targets = 4;
1046
1047 /*
1048 * client_flood: maximum amount of data in a clients queue before
1049 * they are dropped for flooding.
1050 */
1051 client_flood = 2560 bytes;
1052
1053 /*
1054 * message_locale: the default message locale
1055 * Use "standard" for the compiled in defaults.
1056 * To install the translated messages, go into messages/ in the
1057 * source directory and run `make install'.
1058 */
1059 message_locale = "standard";
1060
1061 /*
1062 * usermodes configurable: a list of usermodes for the options below
1063 *
1064 * +b - bots - See bot and drone flooding notices
1065 * +c - cconn - Client connection/quit notices
1066 * +D - deaf - Don't receive channel messages
1067 * +d - debug - See debugging notices
1068 * +f - full - See I: line full notices
1069 * +G - softcallerid - Server Side Ignore for users not on your channels
1070 * +g - callerid - Server Side Ignore (for privmsgs etc)
1071 * +i - invisible - Not shown in NAMES or WHO unless you share a
1072 * a channel
1073 * +k - skill - See server generated KILL messages
1074 * +l - locops - See LOCOPS messages
1075 * +n - nchange - See client nick changes
1076 * +r - rej - See rejected client notices
1077 * +s - servnotice - See general server notices
1078 * +u - unauth - See unauthorized client notices
1079 * +w - wallop - See server generated WALLOPS
1080 * +x - external - See remote server connection and split notices
1081 * +y - spy - See LINKS, STATS, TRACE notices etc.
1082 * +z - operwall - See oper generated WALLOPS
1083 */
1084
1085 /* oper_only_umodes: usermodes only opers may set */
1086 oper_only_umodes = bots, cconn, debug, full, skill, nchange,
1087 rej, spy, external, operwall, locops, unauth;
1088
1089 /* oper_umodes: default usermodes opers get when they /oper */
1090 oper_umodes = locops, servnotice, operwall, wallop;
1091
1092 /*
1093 * servlink_path: path to 'servlink' program used by ircd to handle
1094 * encrypted/compressed server <-> server links.
1095 *
1096 * only define if servlink is not in same directory as ircd itself.
1097 */
1098 #servlink_path = "/usr/local/ircd/bin/servlink";
1099
1100 /*
1101 * default_cipher_preference: default cipher to use for cryptlink when none is
1102 * specified in connect block.
1103 */
1104 #default_cipher_preference = "BF/168";
1105
1106 /*
1107 * use_egd: if your system does not have *random devices yet you
1108 * want to use OpenSSL and encrypted links, enable this. Beware -
1109 * EGD is *very* CPU intensive when gathering data for its pool
1110 */
1111 # use_egd = yes;
1112
1113 /*
1114 * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1115 * which automatically finds the path.
1116 */
1117 # egdpool_path = "/var/run/egd-pool";
1118
1119
1120 /*
1121 * compression_level: level of compression for compressed links between
1122 * servers.
1123 *
1124 * values are between: 1 (least compression, fastest)
1125 * and: 9 (most compression, slowest).
1126 */
1127 # compression_level = 6;
1128
1129 /*
1130 * throttle_time: the minimum amount of time between connections from
1131 * the same ip. exempt {} blocks are excluded from this throttling.
1132 * Offers protection against flooders who reconnect quickly.
1133 * Set to 0 to disable.
1134 */
1135 throttle_time = 10;
1136 };
1137
1138 glines {
1139 /* enable: enable glines, network wide temp klines */
1140 enable = yes;
1141
1142 /* duration: the amount of time a gline will remain on your server before expiring */
1143 duration = 1 day;
1144
1145 /* logging: which types of rules you want to log when triggered (choose reject or block) */
1146 logging = reject, block;
1147
1148 /*
1149 * NOTE: gline ACLs can cause a desync of glines throughout the network, meaning some servers
1150 * may have a gline triggered, and others may not. Also, you only need insert rules for glines
1151 * that you want to block and/or reject. If you want to accept and propagate the gline, do NOT
1152 * put a rule for it.
1153 */
1154
1155 /* user@host for rule to apply to */
1156 user = "god@I.still.hate.packets";
1157 /* server for rule to apply to */
1158 name = "hades.arpa";
1159
1160 /*
1161 * action: action to take when a matching gline is found. options are:
1162 * reject - do not apply the gline locally
1163 * block - do not propagate the gline
1164 */
1165 action = reject, block;
1166
1167 user = "god@*";
1168 name = "*";
1169 action = block;
1170 };
1171
1172 modules {
1173 /*
1174 * module path: other paths to search for modules specified below
1175 * and in /modload.
1176 */
1177 path = "/usr/local/ircd/modules";
1178 path = "/usr/local/ircd/modules/autoload";
1179
1180 /* module: the name of a module to load on startup/rehash */
1181 #module = "some_module.so";
1182 };

Properties

Name Value
svn:eol-style native
svn:keywords "Id Revision"

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28