ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/branches/8.2.x/doc/reference.conf

Comparing ircd-hybrid/branches/8.2.x/doc/reference.conf (file contents):
Revision 3876 by michael, Fri Jun 6 15:42:52 2014 UTC vs.
Revision 5622 by michael, Fri Feb 27 19:19:45 2015 UTC

#	Line 1 | Line 1
1		/*
2		* This is an example configuration file for ircd-hybrid
3		*
4	<	* Copyright (c) 2000-2014 ircd-hybrid development team
4	>	* Copyright (c) 2000-2015 ircd-hybrid development team
5		*
6		* $Id$
7		*/
#	Line 10 | Line 10
10		* ########################################################################
11		* IMPORTANT NOTE:
12		*
13	<	* auth {} blocks MUST be specified in order of precedence.  The first one
14	<	* that matches a user will be used.  So place spoofs first, then specials,
13	>	* auth {} blocks MUST be specified in order of precedence. The first one
14	>	* that matches a user will be used. So place spoofs first, then specials,
15		* then general access.
16		* ########################################################################
17		*
#	Line 58 | Line 58 | serverinfo {
58		description = "ircd-hybrid test server";
59
60		/*
61	<	* network info: the name and description of the network this server
62	<	* is on. Shown in the 005 reply and used with serverhiding.
61	>	* network_name, network_desc: the name and description of the network this
62	>	* server is on. Shown in the 005 reply and used with serverhiding.
63		*/
64		network_name = "MyNet";
65		network_desc = "This is My Network";
#	Line 82 | Line 82 | serverinfo {
82		*/
83		#       vhost6 = "3ffe:80e8:546::2";
84
85	<	/* max_clients: the maximum number of clients allowed to connect. */
86	<	max_clients = 512;
85	>	/*
86	>	* default_max_clients: the default maximum number of clients allowed
87	>	* to connect. This can be changed from within IRC via /QUOTE SET MAX.
88	>	*/
89	>	default_max_clients = 512;
90
91		/*
92		* max_nick_length: only applies to local clients. Must be in the
#	Line 108 | Line 111 | serverinfo {
111		*      chown <ircd-user>.<ircd.group> rsa.key
112		*      chmod 0600 rsa.key
113		*/
114	<	#       rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
114	>	#       rsa_private_key_file = "etc/rsa.key";
115
116		/*
117		* ssl_certificate_file: the path to the file containing our
#	Line 130 | Line 133 | serverinfo {
133		*      Common Name: irc.someirc.net
134		*      E-mail: you@domain.com
135		*/
136	<	#       ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
136	>	#       ssl_certificate_file = "etc/cert.pem";
137
138		/*
139	<	* ssl_dh_param_file:
140	<	*
141	<	* Path to the PEM encoded Diffie-Hellman parameter file.
139	<	* DH parameters are required when using ciphers with EDH
140	<	* (ephemeral Diffie-Hellman) key exchange.
139	>	* ssl_dh_param_file: path to the PEM encoded Diffie-Hellman
140	>	* parameter file. DH parameters are required when using
141	>	* ciphers with EDH (ephemeral Diffie-Hellman) key exchange.
142		*
143		* A DH parameter file can be created by running:
144		*
#	Line 147 | Line 148 | serverinfo {
148		* regarding specific OpenSSL dhparam command-line options
149		* can be found in the OpenSSL manual.
150		*/
151	<	#       ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
151	>	#       ssl_dh_param_file = "etc/dhparam.pem";
152
153		/*
154	<	* ssl_cipher_list:
154	>	* ssl_dh_elliptic_curve: defines the curve to use for the
155	>	* Elliptic Curve Diffie-Hellman (ECDH) algorithm.
156	>	* Default is ANSI X9.62 prime256v1/secp256r1 if nothing else is specified.
157	>	*
158	>	* A list of supported curves by OpenSSL can be obtained by running:
159		*
160	<	* List of ciphers to support on _this_ server. Can be used to
161	<	* enforce specific ciphers for incoming SSL/TLS connections.
162	<	* If a client (which also includes incoming server connections) is not
163	<	* capable of using any of the ciphers listed here, the connection will
160	>	*      openssl ecparam -list_curves
161	>	*/
162	>	#       ssl_dh_elliptic_curve = "secp521r1";
163	>
164	>	/*
165	>	* ssl_cipher_list: list of ciphers to support on _this_ server.
166	>	* Can be used to enforce specific ciphers for incoming SSL/TLS
167	>	* connections. If a client (which also includes incoming server connections)
168	>	* is not capable of using any of the ciphers listed here, the connection will
169		* simply be rejected.
170		*
171		* A list of supported ciphers by OpenSSL can be obtained by running:
#	Line 168 | Line 178 | serverinfo {
178		#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
179
180		/*
181	<	* ssl_server_method:
182	<	* ssl_client_method:
181	>	* ssl_message_digest_algorithm: defines what cryptographic hash function
182	>	* to use for generating fingerprint hashes of X.509 certificates.
183	>	* Default is SHA-256 if nothing else is specified.
184	>	*
185	>	* A list of supported message digest algorithms by OpenSSL can be obtained by running:
186		*
187	<	* SSL/TLS methods we provide for incoming (server method) and
175	<	* outgoing (client method) SSL/TLS connections.
176	<	* This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
187	>	*      openssl list-message-digest-algorithms
188		*/
189	<	#       ssl_server_method = tlsv1, sslv3;
179	<	#       ssl_client_method = tlsv1;
189	>	#       ssl_message_digest_algorithm = "sha256";
190		};
191
192		/*
193	<	* admin {}:  contains admin information about the server
193	>	* admin {}:  contains administrative information about the server
194		*/
195		admin {
196		name = "Smurf target";
#	Line 203 | Line 213 | class {
213
214		/*
215		* number_per_ip: how many local users are allowed to connect
216	<	* from a single IP address  (optional)
216	>	* from a single IP address (optional)
217		*/
218		number_per_ip = 2;
219
220		/*
221		* max_local: how many local users are allowed to connect
222	<	* from a single ident@host  (optional)
222	>	* from a single ident@host (optional)
223		*/
224		max_local = 2;
225
226		/*
227	<	* max_global: network-wide limit of users per ident@host  (optional)
227	>	* max_global: network-wide limit of users per ident@host (optional)
228		*/
229		max_global = 10;
230
#	Line 224 | Line 234 | class {
234		max_number = 100;
235
236		/*
237	<	* the following lines are optional and allow you to define
237	>	* The following lines are optional and allow you to define
238		* how many users can connect from one /NN subnet.
239		*/
240		cidr_bitlen_ipv4 = 24;
#	Line 239 | Line 249 | class {
249
250		/*
251		* recvq: the amount of data allowed in a client's receive queue before
252	<	* they are dropped for flooding. Defaults to 2560 if the chosen
253	<	* value isn't within the range of 512 to 8000.
252	>	* they are dropped for flooding. Defaults to 2560 if the chosen value
253	>	* isn't within the range of 512 to 8000.
254		*/
255		recvq = 2560 bytes;
256		};
#	Line 253 | Line 263 | class {
263		sendq = 100 kbytes;
264
265		/*
266	+	* max_channels: maximum number of channels users in this class can join.
267	+	*/
268	+	max_channels = 60;
269	+
270	+	/*
271		* min_idle: minimum idle time that is shown in /whois.
272		*/
273		min_idle = 3 hours;
#	Line 305 | Line 320 | motd {
320		/*
321		* file: path to the actual motd file.
322		*/
323	<	file = "/usr/local/ircd/etc/german.motd";
323	>	file = "etc/german.motd";
324		};
325
326		/*
#	Line 319 | Line 334 | listen {
334		* Ports are separated by commas; a range may be specified using ".."
335		*/
336
337	<	/* port: listen on all available IP addresses, ports 6665 to 6669 */
337	>	/* port: listen on all available IP addresses, ports 6665 to 6669. */
338		port = 6665 .. 6669;
339
340		/*
#	Line 339 | Line 354 | listen {
354		port = 6697;
355
356		/*
357	<	* host: set a specific IP address/host to listen on using the
357	>	* host: set a specific IP address to listen on using the
358		* subsequent port definitions. This may be IPv4 or IPv6.
359		*/
360		host = "1.2.3.4";
#	Line 355 | Line 370 | listen {
370		auth {
371		/*
372		* user: the user@host allowed to connect. Multiple user
373	<	* lines are permitted within each auth block.
373	>	* lines are permitted within each auth {} block.
374		*/
375		user = "*@172.16.0.0/12";
376		user = "*test@123D:B567:*";
377
378	<	/* password: an optional password that is required to use this block */
378	>	/* password: an optional password that is required to use this block. */
379		password = "letmein";
380
381		/*
382		* encrypted: controls whether the auth password above has been
383	<	* encrypted.
383	>	* encrypted. Default is 'no' if nothing else is specified.
384		*/
385		encrypted = yes;
386
#	Line 375 | Line 390 | auth {
390		*/
391		spoof = "I.still.hate.packets";
392
393	<	/* class: the class the user is placed in */
393	>	/* class: the class the user is placed in. */
394		class = "opers";
395
396		/*
397	<	* need_password - don't allow users who haven't supplied the correct
398	<	*                 password to connect using another auth{} block
399	<	*                 ('&' prefix on /stats I if disabled)
385	<	* need_ident    - require the user to have identd to connect ('+' prefix on /stats I)
397	>	* need_password - don't allow users who haven't supplied the correct  | ('&' prefix on /stats I if disabled)
398	>	*                 password to connect using another auth {} block
399	>	* need_ident    - require the user to have identd to connect          | ('+' prefix on /stats I)
400		* spoof_notice  - enable spoofing notification to admins
401	<	* exceed_limit  - allow a user to exceed class limits ('>' prefix on /stats I)
402	<	* kline_exempt  - exempt this user from k/glines ('^' prefix on /stats I)
403	<	* gline_exempt  - exempt this user from glines ('_' prefix on /stats I)
404	<	* resv_exempt   - exempt this user from resvs ('$' prefix on /stats I)
405	<	* no_tilde      - remove ~ from a user with no ident ('-' prefix on /stats I)
406	<	* can_flood     - allow this user to exceed flood limits ('|' prefix on /stats I)
407	<	* webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
408	<	*                 ('<' prefix on /stats I)
401	>	* exceed_limit  - allow a user to exceed class limits                 | ('>' prefix on /stats I)
402	>	* kline_exempt  - exempt this user from k/glines                      | ('^' prefix on /stats I)
403	>	* gline_exempt  - exempt this user from glines                        | ('_' prefix on /stats I)
404	>	* resv_exempt   - exempt this user from resvs                         | ('$' prefix on /stats I)
405	>	* no_tilde      - remove ~ from a user with no ident                  | ('-' prefix on /stats I)
406	>	* can_flood     - allow this user to exceed flood limits              | ('|' prefix on /stats I)
407	>	* webirc        - enables WEBIRC authentication for web-based         | ('<' prefix on /stats I)
408	>	*                 clients such as Mibbit
409		*/
410		flags = need_password, spoof_notice, exceed_limit, kline_exempt,
411		gline_exempt, resv_exempt, no_tilde, can_flood;
#	Line 399 | Line 413 | auth {
413
414		auth {
415		/*
416	<	* redirect: the server and port to redirect a user to. A user does not
417	<	* have to obey the redirection; the ircd just suggests an alternative
418	<	* server for them.
416	>	* redirserv, redirport: the server and port to redirect a user to.
417	>	* A user does not have to obey the redirection; the ircd just
418	>	* suggests an alternative server for them.
419		*/
420	<	redirserv = "this.is.not.a.real.server";
420	>	redirserv = "server.tld";
421		redirport = 6667;
422
423	<	user = "*.server";
423	>	user = "*@*.tld";
424
425	<	/* class: a class is required even though it is not used */
425	>	/* class: a class is required even though it is not used. */
426		class = "users";
427		};
428
#	Line 422 | Line 436 | auth {
436		* operator {}:  defines ircd operators
437		*/
438		operator {
439	<	/* name: the name of the oper */
439	>	/* name: the name of the operator */
440		name = "sheep";
441
442		/*
443		* user: the user@host required for this operator. Multiple user
444	<	* lines are permitted within each operator block.
444	>	* lines are permitted within each operator {} block.
445		*/
446		user = "*sheep@192.168.0.0/16";
447		user = "*@127.0.0.0/8";
#	Line 444 | Line 458 | operator {
458
459		/*
460		* encrypted: controls whether the oper password above has been
461	<	* encrypted.
461	>	* encrypted. Default is 'yes' if nothing else is specified.
462		*/
463		encrypted = yes;
464
465		/*
466	<	* rsa_public_key_file: the public key for this oper when using Challenge.
466	>	* whois: allows to override the default RPL_WHOISOPERATOR numeric
467	>	* string shown in /whois.
468	>	* This string is propagated to all servers on the network.
469	>	*/
470	>	#       whois = "is a Smurf Target (IRC Operator)";
471	>
472	>	/*
473	>	* rsa_public_key_file: the public key for this oper when using /challenge.
474		* A password should not be defined when this is used; see
475		* doc/challenge.txt for more information.
476		*/
477	<	#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
477	>	#       rsa_public_key_file = "etc/oper.pub";
478
479		/*
480		* ssl_certificate_fingerprint: enhances security by additionally checking
#	Line 469 | Line 490 | operator {
490
491		/*
492		* ssl_connection_required: client must be connected over SSL/TLS
493	<	* in order to be able to use this oper{} block.
493	>	* in order to be able to use this operator {} block.
494		* Default is 'no' if nothing else is specified.
495		*/
496		ssl_connection_required = no;
497
498	<	/* class: the class the oper joins when they successfully /oper */
498	>	/* class: the class the oper joins when they successfully /oper or /challenge. */
499		class = "opers";
500
501		/*
502	<	* umodes: the default usermodes opers get when they /oper. If defined,
503	<	* it will override oper_umodes settings in general {}.
502	>	* umodes: the default usermodes opers get when they /oper or /challenge.
503	>	* If defined, it will override oper_umodes settings in general {}.
504		* Available usermodes:
505		*
506		* +b - bots         - See bot and drone flooding notices
#	Line 488 | Line 509 | operator {
509		* +d - debug        - See debugging notices
510		* +e - external     - See remote server connection and split notices
511		* +F - farconnect   - Remote client connection/quit notices
512	<	* +f - full         - See auth{} block full notices
512	>	* +f - full         - See auth {} block full notices
513		* +G - softcallerid - Server Side Ignore for users not on your channels
514		* +g - callerid     - Server Side Ignore (for privmsgs etc)
515		* +H - hidden       - Hides operator status to other users
#	Line 508 | Line 529 | operator {
529		umodes = locops, servnotice, wallop;
530
531		/*
532	<	* privileges: controls the activities and commands an oper is
533	<	* allowed to do on the server. All options default to no.
534	<	* Available options:
532	>	* flags: controls the activities and commands an oper is
533	>	* allowed to do on the server. All flags default to 'no'.
534	>	* Available flags:
535		*
536	<	* module         - allows MODULE
536	>	* admin          - gives administrator privileges    | ('A' flag)
537		* connect        - allows local CONNECT              | ('P' flag)
538		* connect:remote - allows remote CONNECT             | ('Q' flag)
539	<	* squit          - allows local SQUIT                | ('R' flag)
540	<	* squit:remote   - allows remote SQUIT               | ('S' flag)
539	>	* die            - allows DIE                        | ('D' flag)
540	>	* dline          - allows DLINE                      |
541	>	* gline          - allows GLINE                      | ('G' flag)
542	>	* globops        - allows GLOBOPS                    |
543		* kill           - allows to KILL local clients      | ('N' flag)
544		* kill:remote    - allows remote users to be /KILL'd | ('O' flag)
522	–	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
523	–	* dline          - allows DLINE                      |
524	–	* undline        - allows UNDLINE                    |
545		* kline          - allows KLINE                      | ('K' flag)
526	–	* unkline        - allows UNKLINE                    | ('U' flag)
527	–	* gline          - allows GLINE                      | ('G' flag)
528	–	* xline          - allows XLINE                      | ('X' flag)
529	–	* unxline        - allows UNXLINE                    |
546		* locops         - allows LOCOPS                     |
547	<	* globops        - allows GLOBOPS                    |
548	<	* wallops        - allows WALLOPS                    |
547	>	* module         - allows MODULE                     |
548	>	* opme           - allows OPME                       |
549		* rehash         - allows oper to REHASH config      | ('H' flag)
550	<	* die            - allows DIE                        | ('D' flag)
550	>	* remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
551		* restart        - allows RESTART                    |
552		* set            - allows SET                        |
553	<	* admin          - gives administrator privileges    | ('A' flag)
553	>	* squit          - allows local SQUIT                | ('R' flag)
554	>	* squit:remote   - allows remote SQUIT               | ('S' flag)
555	>	* undline        - allows UNDLINE                    |
556	>	* unkline        - allows UNKLINE                    | ('U' flag)
557	>	* unxline        - allows UNXLINE                    |
558	>	* wallops        - allows WALLOPS                    |
559	>	* xline          - allows XLINE                      | ('X' flag)
560		*/
561	<	flags = kill, kill:remote, connect, connect:remote, kline, unkline,
562	<	xline, globops, restart, die, rehash, admin, module;
541	<	};
542	<
543	<	/*
544	<	* service {}: specifies a server which may act as a network service
545	<	*
546	<	* NOTE: it is very important that every server on the network
547	<	*       has the same service{} block.
548	<	*/
549	<	service {
550	<	name = "service.someserver";
551	<	name = "stats.someserver";
561	>	flags = admin, connect, connect:remote, die, globops, kill, kill:remote,
562	>	kline, module, rehash, restart, set, unkline, unxline, xline;
563		};
564
565		/*
566		* connect {}: define a server to connect to
567		*/
568		connect {
569	<	/* name: the name of the server */
569	>	/* name: the name of the server. */
570		name = "irc.uplink.com";
571
572		/*
#	Line 573 | Line 584 | connect {
584		vhost = "192.168.0.2";
585
586		/*
587	<	* passwords: the passwords to send (OLD C:) and accept (OLD N:).
587	>	* send_password, accept_password: the passwords to send and accept.
588		* The remote server will have these passwords swapped.
589		*/
590		send_password = "password";
#	Line 585 | Line 596 | connect {
596		*/
597		encrypted = no;
598
599	<	/* port: the port to connect to this server on */
599	>	/* port: the port to connect to this server on. */
600		port = 6666;
601
602		/*
#	Line 600 | Line 611 | connect {
611		*/
612		#       leaf_mask = "*.uk";
613
614	<	/* class: the class this server is in */
614	>	/* class: the class this server is in. */
615		class = "server";
616
617		/*
618	<	* ssl_cipher_list:
619	<	*
620	<	* List of ciphers that the server we are connecting to must support.
610	<	* If the server is not capable of using any of the ciphers listed below,
611	<	* the connection will simply be rejected.
618	>	* ssl_cipher_list: list of ciphers that the server we are connecting to
619	>	* must support. If the server is not capable of using any of the ciphers
620	>	* listed below, the connection will simply be rejected.
621		* Can be used to enforce stronger ciphers, even though this option
622		* is not necessarily required to establish a SSL/TLS connection.
623		*
#	Line 660 | Line 669 | cluster {
669		*       will not be propagated to clustered servers.
670		*
671		*       Remote servers are not necessarily required to accept
672	<	*       clustered lines, they need a shared{} for *THIS* server
673	<	*       in order to accept them.
672	>	*       clustered lines, they need a shared {} block for *THIS*
673	>	*       server in order to accept them.
674		*/
675		name = "*.arpa";
676
#	Line 722 | Line 731 | shared {
731
732		/*
733		* kill {}:  users that are not allowed to connect
734	<	* Oper issued klines will be added to the specified kline config
734	>	* Oper issued klines will be added to the specified kline database
735		*/
736		kill {
737		user = "bad@*.hacked.edu";
#	Line 732 | Line 741 | kill {
741		/*
742		* deny {}:  IP addresses that are not allowed to connect
743		* (before DNS/ident lookup)
744	<	* Oper issued dlines will be added to the specified dline config
744	>	* Oper issued dlines will be added to the specified dline database
745		*/
746		deny {
747		ip = "10.0.1.0/24";
#	Line 778 | Line 787 | resv {
787		};
788
789		/*
790	<	* gecos {}:  Used for banning users based on their "realname".
790	>	* gecos {}:  used for banning users based on their "realname".
791		*/
792		gecos {
793		name = "*sex*";
#	Line 791 | Line 800 | gecos {
800		};
801
802		/*
803	<	* channel {}:  The channel block contains options pertaining to channels
803	>	* service {}: specifies a server which may act as a network service
804	>	*
805	>	* NOTE: it is very important that every server on the network
806	>	*       has the same service {} block.
807	>	*/
808	>	service {
809	>	name = "service.someserver";
810	>	name = "stats.someserver";
811	>	};
812	>
813	>	/*
814	>	* pseudo {}: adds pseudo/custom commands also known as service aliases
815	>	*/
816	>	pseudo {
817	>	/* command: the actual command/alias */
818	>	command = "IDENTIFY";
819	>
820	>	/* prepend: optional text that can be prepended before the user's message */
821	>	prepend = "IDENTIFY ";
822	>
823	>	/* name: the service name, used for error messages */
824	>	name = "NickServ";
825	>
826	>	/* target: the actual target where this message should be sent to */
827	>	target = "NickServ@service.someserver";
828	>	};
829	>
830	>	pseudo {
831	>	command = "CHANSERV";
832	>	name = "ChanServ";
833	>	target = "ChanServ@service.someserver";
834	>	};
835	>
836	>	pseudo {
837	>	command = "CS";
838	>	name = "ChanServ";
839	>	target = "ChanServ@service.someserver";
840	>	};
841	>
842	>	pseudo {
843	>	command = "NICKSERV";
844	>	name = "NickServ";
845	>	target = "NickServ@service.someserver";
846	>	};
847	>
848	>	pseudo {
849	>	command = "NS";
850	>	name = "NickServ";
851	>	target = "NickServ@service.someserver";
852	>	};
853	>
854	>	pseudo {
855	>	command = "MEMOSERV";
856	>	name = "MemoServ";
857	>	target = "MemoServ@service.someserver";
858	>	};
859	>
860	>	pseudo {
861	>	command = "MS";
862	>	name = "MemoServ";
863	>	target = "MemoServ@service.someserver";
864	>	};
865	>
866	>	pseudo {
867	>	command = "OPERSERV";
868	>	name = "OperServ";
869	>	target = "OperServ@service.someserver";
870	>	};
871	>
872	>	pseudo {
873	>	command = "OS";
874	>	name = "OperServ";
875	>	target = "OperServ@service.someserver";
876	>	};
877	>
878	>	pseudo {
879	>	command = "HOSTSERV";
880	>	name = "HostServ";
881	>	target = "HostServ@service.someserver";
882	>	};
883	>
884	>	pseudo {
885	>	command = "HS";
886	>	name = "HostServ";
887	>	target = "HostServ@service.someserver";
888	>	};
889	>
890	>	pseudo {
891	>	command = "BOTSERV";
892	>	name = "BotServ";
893	>	target = "BotServ@service.someserver";
894	>	};
895	>
896	>	pseudo {
897	>	command = "BS";
898	>	name = "BotServ";
899	>	target = "BotServ@service.someserver";
900	>	};
901	>
902	>	/*
903	>	* channel {}:  the channel block contains options pertaining to channels
904		*/
905		channel {
906		/*
#	Line 824 | Line 933 | channel {
933		knock_client_time = 5 minutes;
934
935		/*
936	<	* knock_delay_channel: How often a KNOCK to any specific channel
936	>	* knock_delay_channel: how often a KNOCK to any specific channel
937		* is permitted, regardless of the user sending the KNOCK.
938		*/
939		knock_delay_channel = 1 minute;
940
941		/*
942	<	* max_chans_per_user: The maximum number of channels a user can
943	<	* join/be on.
835	<	*/
836	<	max_chans_per_user = 25;
837	<
838	<	/*
839	<	* max_chans_per_oper: The maximum number of channels an oper can
840	<	* join/be on.
942	>	* max_channels: the maximum number of channels a user can join/be on.
943	>	* This is a default value which can be overriden with class {} blocks.
944		*/
945	<	max_chans_per_oper = 50;
945	>	max_channels = 25;
946
947		/* max_bans: maximum number of +b/e/I modes in a channel */
948		max_bans = 100;
949
950		/*
951	<	* how many joins in how many seconds constitute a flood. Use 0 to
952	<	* disable. +b opers will be notified (changeable via /set)
951	>	* default_join_flood_count, default_join_flood_time:
952	>	* how many joins in how many seconds constitute a flood. Use 0 to disable.
953	>	* +b opers will be notified. These are only default values which can be
954	>	* changed via "/QUOTE SET JFLOODCOUNT" and "/QUOTE SET JFLOODTIME".
955		*/
956	<	join_flood_count = 16;
957	<	join_flood_time = 8 seconds;
956	>	default_join_flood_count = 18;
957	>	default_join_flood_time = 6 seconds;
958
959		/*
960		* The ircd will now check splitmode (whether a server is split from
#	Line 882 | Line 987 | channel {
987		};
988
989		/*
990	<	* serverhide {}:  The serverhide block contains the options regarding
991	<	* to server hiding
990	>	* serverhide {}:  the serverhide block contains the options regarding
991	>	* to server hiding. For more information regarding server hiding,
992	>	* please see doc/serverhide.txt
993		*/
994		serverhide {
995		/*
#	Line 918 | Line 1024 | serverhide {
1024
1025		/*
1026		* hide_services: define this if you want to hide the location of
1027	<	* services servers that are specified in the service{} block.
1027	>	* services servers that are specified in the service {} block.
1028		*/
1029		hide_services = no;
1030
1031		/*
1032	<	* Use this as the servername users see if hide_servers = yes.
1032	>	* hidden_name: use this as the servername users see if hide_servers = yes.
1033		*/
1034		hidden_name = "*.hidden.com";
1035
1036		/*
1037	<	* hide_server_ips: If this is disabled, opers will be unable to see
1037	>	* hide_server_ips: if this is disabled, opers will be unable to see
1038		* servers' IP addresses and will be shown a masked IP address; admins
1039		* will be shown the real IP address.
1040		*
#	Line 943 | Line 1049 | serverhide {
1049		};
1050
1051		/*
1052	<	* general {}:  The general block contains many of the options that were once
1052	>	* general {}:  the general block contains many of the options that were once
1053		* compiled in options in config.h
1054		*/
1055		general {
#	Line 953 | Line 1059 | general {
1059		*/
1060		cycle_on_host_change = yes;
1061
956	–	/* services_name: servername of nick/channel services */
957	–	services_name = "service.someserver";
958	–
1062		/* max_watch: maximum WATCH entries a client can have. */
1063	<	max_watch = 50;
1063	>	max_watch = 30;
1064	>
1065	>	/* max_accept: maximum allowed /accept's for +g usermode. */
1066	>	max_accept = 30;
1067
1068		/* gline_enable: enable glines (network-wide temporary klines). */
1069		gline_enable = yes;
1070
1071		/*
1072	<	* gline_duration: the amount of time a gline will remain on your
1072	>	* gline_duration: the amount of time a G-line will remain on your
1073		* server before expiring.
1074		*/
1075		gline_duration = 1 day;
#	Line 976 | Line 1082 | general {
1082
1083		/*
1084		* gline_min_cidr: the minimum required length of a CIDR bitmask
1085	<	* for IPv4 based glines.
1085	>	* for IPv4 based G-lines.
1086		*/
1087		gline_min_cidr = 16;
1088
1089		/*
1090		* gline_min_cidr6: the minimum required length of a CIDR bitmask
1091	<	* for IPv6 based glines.
1091	>	* for IPv6 based G-lines.
1092		*/
1093		gline_min_cidr6 = 48;
1094
#	Line 1001 | Line 1107 | general {
1107		kill_chase_time_limit = 30 seconds;
1108
1109		/*
1110	<	* hide_spoof_ips: if disabled, opers will be allowed to see the real
1111	<	* IP address of spoofed users in /trace etc. If this is defined they
1112	<	* will be shown a masked IP.
1007	<	*/
1008	<	hide_spoof_ips = yes;
1009	<
1010	<	/*
1011	<	* Ignore bogus timestamps from other servers. Yes, this will desync the
1012	<	* network, but it will allow chanops to resync with a valid non TS 0
1110	>	* ignore_bogus_ts: ignore bogus timestamps from other servers.
1111	>	* Yes, this will desync the network, but it will allow chanops
1112	>	* to resync with a valid non TS 0.
1113		*
1114		* This should be enabled network wide, or not at all.
1115		*/
#	Line 1029 | Line 1129 | general {
1129
1130		/*
1131		* default_floodcount: the default value of floodcount that is configurable
1132	<	* via /quote set floodcount. This is the number of lines a user
1133	<	* may send to any other user/channel in one second.
1132	>	* via /quote set floodcount. This is the number of lines a user may send
1133	>	* to any other user/channel in one second. Set to 0 to disable.
1134		*/
1135		default_floodcount = 10;
1136
#	Line 1050 | Line 1150 | general {
1150		* min_nonwildcard: the minimum number of non-wildcard characters in
1151		* k/d/g lines placed via the server. K-lines hand-placed are exempt from
1152		* this limit.
1153	<	* Wildcard chars: '.', ':', '*', '?', '@', '!'
1153	>	* Wildcard characters: '.', ':', '*', '?', '@', '!'
1154		*/
1155		min_nonwildcard = 4;
1156
1157		/*
1158		* min_nonwildcard_simple: the minimum number of non-wildcard characters
1159	<	* in gecos bans. Wildcard chars: '*', '?'
1159	>	* in gecos bans. Wildcard characters: '*', '?'
1160		*/
1161		min_nonwildcard_simple = 3;
1162
1063	–	/* max_accept: maximum allowed /accept's for +g usermode. */
1064	–	max_accept = 50;
1065	–
1163		/* anti_nick_flood: enable the nickflood control code. */
1164		anti_nick_flood = yes;
1165
1166	<	/* nick flood: the number of nick changes allowed in the specified period */
1167	<	max_nick_time = 20 seconds;
1166	>	/*
1167	>	* max_nick_changes, max_nick_time: the number of nick changes allowed in
1168	>	* the specified period.
1169	>	*/
1170		max_nick_changes = 5;
1171	+	max_nick_time = 20 seconds;
1172	+
1173	+	/*
1174	+	* away_count, away_time: how many AWAY command are permitted per
1175	+	* client per away_time.
1176	+	*/
1177	+	away_count = 2;
1178	+	away_time = 10 seconds;
1179
1180		/*
1181		* anti_spam_exit_message_time: the minimum time a user must be connected
#	Line 1077 | Line 1184 | general {
1184		anti_spam_exit_message_time = 5 minutes;
1185
1186		/*
1187	<	* ts delta: the time delta allowed between server clocks before
1188	<	* a warning is given, or before the link is dropped. All servers
1189	<	* should run ntpdate/rdate to keep clocks in sync
1187	>	* ts_warn_delta, ts_max_delta: the time delta allowed between server
1188	>	* clocks before a warning is given, or before the link is dropped.
1189	>	* All servers should run ntpdate/rdate to keep clocks in sync.
1190		*/
1191	<	ts_warn_delta = 10 seconds;
1192	<	ts_max_delta = 2 minutes;
1191	>	ts_warn_delta = 3 seconds;
1192	>	ts_max_delta = 15 seconds;
1193
1194		/*
1195		* warn_no_connect_block: warn opers about servers that try to connect
#	Line 1094 | Line 1201 | general {
1201		/*
1202		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1203		* operators and administrators. Doing so is a good idea in case
1204	<	* there are any exempted (exempt{}) server IPs you don't want to
1204	>	* there are any exempted (exempt {}) server IPs you don't want to
1205		* see leaked.
1206		*/
1207		stats_e_disabled = no;
1208
1209	<	/* stats_o_oper only: make stats o (opers) oper only */
1209	>	/* stats_m_oper_only: make /stats m/M (messages) oper only. */
1210	>	stats_m_oper_only = yes;
1211	>
1212	>	/* stats_o_oper_only: make stats o (opers) oper only. */
1213		stats_o_oper_only = yes;
1214
1215	<	/* stats_P_oper_only: make stats P (ports) oper only */
1215	>	/* stats_P_oper_only: make stats P (ports) oper only. */
1216		stats_P_oper_only = yes;
1217
1218	<	/* stats_u_oper_only: make stats u (uptime) oper only */
1218	>	/* stats_u_oper_only: make stats u (uptime) oper only. */
1219		stats_u_oper_only = no;
1220
1221		/*
1222		* stats_i_oper_only: make stats i (auth {}) oper only. Set to:
1223	<	*     yes    - show users no auth blocks, made oper only.
1224	<	*     masked - show users the first matching auth block
1225	<	*     no     - show users all auth blocks.
1223	>	*     yes    - show users no auth {} blocks, made oper only
1224	>	*     masked - show users the first matching auth {} block
1225	>	*     no     - show users all auth {} blocks
1226		*/
1227		stats_i_oper_only = yes;
1228
1229		/*
1230		* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1231	<	*     yes    - show users no auth blocks, made oper only
1232	<	*     masked - show users the first matching auth block
1233	<	*     no     - show users all auth blocks.
1231	>	*     yes    - show users no klines, made oper only
1232	>	*     masked - show users the first matching kline
1233	>	*     no     - show users all klines
1234		*/
1235		stats_k_oper_only = yes;
1236
#	Line 1132 | Line 1242 | general {
1242
1243		/*
1244		* opers_bypass_callerid: allows operators to bypass +g and message
1245	<	* anyone who has it set (useful if you use services).
1245	>	* anyone who has it set.
1246		*/
1247		opers_bypass_callerid = no;
1248
#	Line 1145 | Line 1255 | general {
1255
1256		/*
1257		* pace_wait: minimum time required between use of more intensive commands
1258	<	* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, WHOWAS)
1258	>	* (INFO, LINKS, MAP, MOTD, STATS, WHO, WHOWAS)
1259		*/
1260		pace_wait = 10 seconds;
1261
#	Line 1156 | Line 1266 | general {
1266		short_motd = no;
1267
1268		/*
1269	<	* ping_cookie: require clients to respond exactly to a ping command,
1269	>	* ping_cookie: require clients to respond exactly to a PING command,
1270		* can help block certain types of drones and FTP PASV mode spoofing.
1271		*/
1272		ping_cookie = no;
#	Line 1164 | Line 1274 | general {
1274		/* no_oper_flood: increase flood limits for opers. */
1275		no_oper_flood = yes;
1276
1167	–	/*
1168	–	* true_no_oper_flood: completely eliminate flood limits for opers
1169	–	* and for clients with can_flood = yes in their auth {} blocks.
1170	–	*/
1171	–	true_no_oper_flood = yes;
1172	–
1277		/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1278		oper_pass_resv = yes;
1279
#	Line 1191 | Line 1295 | general {
1295		* +d - debug        - See debugging notices
1296		* +e - external     - See remote server connection and split notices
1297		* +F - farconnect   - Remote client connection/quit notices
1298	<	* +f - full         - See auth{} block full notices
1298	>	* +f - full         - See auth {} block full notices
1299		* +G - softcallerid - Server Side Ignore for users not on your channels
1300		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1301		* +H - hidden       - Hides operator status to other users
#	Line 1209 | Line 1313 | general {
1313		* +y - spy          - See LINKS, STATS, TRACE notices etc.
1314		*/
1315
1316	<	/* oper_only_umodes: usermodes only opers may set */
1317	<	oper_only_umodes = bots, cconn, debug, full, hidden, skill,
1318	<	nchange, rej, spy, external,
1215	<	locops, unauth, farconnect;
1316	>	/* oper_only_umodes: usermodes only operators may set. */
1317	>	oper_only_umodes = bots, cconn, debug, external, farconnect, full, hidden, locops,
1318	>	nchange, rej, skill, spy, unauth;
1319
1320	<	/* oper_umodes: default usermodes opers get when they /oper */
1320	>	/* oper_umodes: default usermodes operators get when they /oper or /challenge. */
1321		oper_umodes = bots, locops, servnotice, wallop;
1322
1323		/*
1221	–	* use_egd: if your system does not have *random devices yet you
1222	–	* want to use OpenSSL and encrypted links, enable this. Beware -
1223	–	* EGD is *very* CPU intensive when gathering data for its pool.
1224	–	*/
1225	–	#       use_egd = yes;
1226	–
1227	–	/*
1228	–	* egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1229	–	* which automatically finds the path.
1230	–	*/
1231	–	#       egdpool_path = "/var/run/egd-pool";
1232	–
1233	–
1234	–	/*
1324		* throttle_count: the maximum number of connections from the same
1325		* IP address allowed in throttle_time duration.
1326		*/
#	Line 1252 | Line 1341 | modules {
1341		* path: other paths to search for modules specified below
1342		* and in "/module load".
1343		*/
1344	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1345	<	path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1344	>	path = "lib/ircd-hybrid/modules";
1345	>	#       path = "lib/ircd-hybrid/modules/extra";
1346	>	path = "lib/ircd-hybrid/modules/autoload";
1347
1348		/* module: the name of a module to load on startup/rehash. */
1349		#       module = "some_module.la";
#	Line 1268 | Line 1358 | log {
1358
1359		file {
1360		type = oper;
1361	<	name = "/usr/local/ircd/var/log/oper.log";
1361	>	name = "var/log/oper.log";
1362		size = unlimited;
1363		};
1364
1365		file {
1366		type = user;
1367	<	name = "/usr/local/ircd/var/log/user.log";
1367	>	name = "var/log/user.log";
1368		size = 50 megabytes;
1369		};
1370
1371		file {
1372		type = kill;
1373	<	name = "/usr/local/ircd/var/log/kill.log";
1373	>	name = "var/log/kill.log";
1374		size = 50 megabytes;
1375		};
1376
1377		file {
1378		type = kline;
1379	<	name = "/usr/local/ircd/var/log/kline.log";
1379	>	name = "var/log/kline.log";
1380		size = 50 megabytes;
1381		};
1382
1383		file {
1384		type = dline;
1385	<	name = "/usr/local/ircd/var/log/dline.log";
1385	>	name = "var/log/dline.log";
1386		size = 50 megabytes;
1387		};
1388
1389		file {
1390		type = gline;
1391	<	name = "/usr/local/ircd/var/log/gline.log";
1391	>	name = "var/log/gline.log";
1392		size = 50 megabytes;
1393		};
1394
1395		file {
1396		type = xline;
1397	<	name = "/usr/local/ircd/var/log/xline.log";
1397	>	name = "var/log/xline.log";
1398		size = 50 megabytes;
1399		};
1400
1401		file {
1402		type = resv;
1403	<	name = "/usr/local/ircd/var/log/resv.log";
1403	>	name = "var/log/resv.log";
1404		size = 50 megabytes;
1405		};
1406
1407		file {
1408		type = debug;
1409	<	name = "/usr/local/ircd/var/log/debug.log";
1409	>	name = "var/log/debug.log";
1410		size = 50 megabytes;
1411		};
1412		};

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)