ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/svn/ircd-hybrid/branches/8.2.x/doc/reference.conf

Comparing:
ircd-hybrid/trunk/doc/reference.conf (file contents), Revision 2018 by michael, Sun May 12 16:24:04 2013 UTC vs.
ircd-hybrid/branches/8.2.x/doc/reference.conf (file contents), Revision 3474 by michael, Sun May 4 15:45:10 2014 UTC

#	Line 1 | Line 1
1	<	/* ircd-hybrid reference configuration file
2	<	* Copyright (C) 2000-2013 Hybrid Development Team
1	>	/*
2	>	* This is an example configuration file for ircd-hybrid
3		*
4	<	* Written by ejb, wcampbel, db, leeh and others
4	>	* Copyright (c) 2000-2014 ircd-hybrid development team
5		*
6		* $Id$
7		*/
8
9		/*
10		* ########################################################################
11	<	* IMPORTANT NOTES:
11	>	* IMPORTANT NOTE:
12		*
13		* auth {} blocks MUST be specified in order of precedence.  The first one
14		* that matches a user will be used.  So place spoofs first, then specials,
#	Line 23 | Line 23
23		*
24		* Times/durations are written as:
25		*        12 hours 30 minutes 1 second
26	<	*
26	>	*
27		* Valid units of time:
28		*        year, month, week, day, hour, minute, second
29		*
30		* Valid units of size:
31		*        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
32		*
33	<	* Sizes and times may be singular or plural.
34	<	*/
33	>	* Sizes and times may be singular or plural.
34	>	*/
35
36
37		/*
#	Line 39 | Line 39
39		*/
40		serverinfo {
41		/*
42	<	* name: the name of this server.  This cannot be changed at runtime.
42	>	* name: the name of this server. This cannot be changed at runtime.
43		*/
44		name = "hades.arpa";
45
46		/*
47	<	* sid: a server's unique ID.  This is three characters long and must
48	<	* be in the form [0-9][A-Z0-9][A-Z0-9].  The first character must be
47	>	* sid: a server's unique ID. This is three characters long and must
48	>	* be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
49		* a digit, followed by 2 alpha-numerical letters.
50	+	*
51		* NOTE: The letters must be capitalized. This cannot be changed at runtime.
52		*/
53		sid = "0HY";
#	Line 73 | Line 74 | serverinfo {
74		* vhost: the IP to bind to when we connect outward to ipv4 servers.
75		* This should be an ipv4 IP only, or "*" for INADDR_ANY.
76		*/
77	<	#vhost = "192.169.0.1";
77	>	#       vhost = "192.169.0.1";
78
79		/*
80	<	* vhost6: the IP to bind to when we connect outward to ipv6 servers.
81	<	* This should be an ipv6 IP only, or "*" for INADDR_ANY.
80	>	* vhost6: the address to bind to when we make outgoing connections
81	>	* to IPv6 servers. This should be an IPv6 address, or "*" for INADDR_ANY.
82		*/
83	<	#vhost6 = "3ffe:80e8:546::2";
83	>	#       vhost6 = "3ffe:80e8:546::2";
84
85		/* max_clients: the maximum number of clients allowed to connect. */
86		max_clients = 512;
#	Line 98 | Line 99 | serverinfo {
99		max_topic_length = 160;
100
101		/*
102	<	* rsa_private_key_file: the path to the file containing our
103	<	* rsa key for cryptlink.
102	>	* rsa_private_key_file: the path to the file containing the
103	>	* RSA key.
104	>	*
105	>	* Example commands to store a 2048 bit RSA key in rsa.key:
106		*
104	–	* Example command to store a 2048 bit RSA keypair in
105	–	* rsa.key, and the public key in rsa.pub:
106	–	*
107		*      openssl genrsa -out rsa.key 2048
108	<	*      openssl rsa -in rsa.key -pubout -out rsa.pub
109	<	*      chown <ircd-user>.<ircd.group> rsa.key rsa.pub
108	>	*      chown <ircd-user>.<ircd.group> rsa.key
109		*      chmod 0600 rsa.key
111	–	*      chmod 0644 rsa.pub
110		*/
111	<	#rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
111	>	#       rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
112
113		/*
114		* ssl_certificate_file: the path to the file containing our
115	<	* ssl certificate for encrypted client connection.
115	>	* SSL certificate for encrypted client connection.
116		*
117		* This assumes your private RSA key is stored in rsa.key. You
118		* MUST have an RSA key in order to generate the certificate.
#	Line 132 | Line 130 | serverinfo {
130		*      Common Name: irc.someirc.net
131		*      E-mail: you@domain.com
132		*/
133	<	#ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
133	>	#       ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
134
135		/*
136		* ssl_dh_param_file:
137		*
138		* Path to the PEM encoded Diffie-Hellman parameter file.
139	<	* DH parameters are strictly required when using ciphers
140	<	* with EDH (ephemeral Diffie-Hellman) key exchange.
139	>	* DH parameters are required when using ciphers with EDH
140	>	* (ephemeral Diffie-Hellman) key exchange.
141		*
142		* A DH parameter file can be created by running:
143		*
144	<	*      openssl dhparam -out dhparam.pem 1024
144	>	*      openssl dhparam -out dhparam.pem 2048
145		*
146		* Prime size must be at least 1024 bits. Further information
147		* regarding specific OpenSSL dhparam command-line options
148		* can be found in the OpenSSL manual.
149		*/
150	<	#ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
150	>	#       ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
151
152		/*
153		* ssl_cipher_list:
154		*
155	<	* List of ciphers that are supported by _this_ server. Can be used to
155	>	* List of ciphers to support on _this_ server. Can be used to
156		* enforce specific ciphers for incoming SSL/TLS connections.
157	<	* If a client (which also includes incoming server connections) isn't
158	<	* capable of any cipher listed below, the connection will simply be
159	<	* rejected.
157	>	* If a client (which also includes incoming server connections) is not
158	>	* capable of using any of the ciphers listed here, the connection will
159	>	* simply be rejected.
160		*
161	<	* A list of supported ciphers can be obtained by running:
161	>	* A list of supported ciphers by OpenSSL can be obtained by running:
162		*
163		*      openssl ciphers -ssl3 -tls1 -v
164		*
165		* Multiple ciphers are separated by colons. The order of preference is
166		* from left to right.
167		*/
168	<	#ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
168	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
169
170		/*
171		* ssl_server_method:
#	Line 177 | Line 175 | serverinfo {
175		* outgoing (client method) SSL/TLS connections.
176		* This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
177		*/
178	<	#ssl_server_method = tlsv1, sslv3;
179	<	#ssl_client_method = tlsv1;
178	>	#       ssl_server_method = tlsv1, sslv3;
179	>	#       ssl_client_method = tlsv1;
180		};
181
182		/*
#	Line 205 | Line 203 | class {
203
204		/*
205		* number_per_ip: how many local users are allowed to connect
206	<	* from one IP  (optional)
206	>	* from a single IP address  (optional)
207		*/
208		number_per_ip = 2;
209
210		/*
211		* max_local: how many local users are allowed to connect
212	<	* from one ident@host  (optional)
212	>	* from a single ident@host  (optional)
213		*/
214		max_local = 2;
215
#	Line 234 | Line 232 | class {
232		number_per_cidr = 16;
233
234		/*
235	<	* sendq: the amount of data allowed in a clients send queue before
235	>	* sendq: the amount of data allowed in a client's send queue before
236		* they are dropped.
237		*/
238		sendq = 100 kbytes;
239
240		/*
241	<	* recvq: maximum amount of data in a clients receive queue before
241	>	* recvq: the amount of data allowed in a client's receive queue before
242		* they are dropped for flooding. Defaults to 2560 if the chosen
243		* value isn't within the range of 512 to 8000.
244		*/
#	Line 267 | Line 265 | class {
265		/*
266		* flags:
267		*
268	<	* random_idle          - idle time is randomly selected within the
269	<	*                        range of min_idle to max_idle
270	<	* hide_idle_from_opers - fake idle time will be shown to operators, too
268	>	* random_idle          - a fake idle time is set randomly between
269	>	*                        min_idle and max_idle
270	>	* hide_idle_from_opers - the fake idle time will also be shown to operators
271		*/
272		flags = random_idle, hide_idle_from_opers;
273		};
#	Line 284 | Line 282 | class {
282		*/
283		connectfreq = 5 minutes;
284
285	<	/* max number: the amount of servers to autoconnect to. */
285	>	/* max number: the number of servers to autoconnect to. */
286		max_number = 1;
287
288		/* sendq: servers need a higher sendq as they send more data. */
#	Line 292 | Line 290 | class {
290		};
291
292		/*
293	+	* motd {}: Allows the display of a different MOTD to a client
294	+	* depending on its origin. Applies to local users only.
295	+	*/
296	+	motd {
297	+	/*
298	+	* mask: multiple mask entries are permitted. Mask can either be
299	+	* a class name or a hostname. CIDR is supported.
300	+	*/
301	+	mask = "*.at";
302	+	mask = "*.de";
303	+	mask = "*.ch";
304	+
305	+	/*
306	+	* file: path to the actual motd file.
307	+	*/
308	+	file = "/usr/local/ircd/etc/german.motd";
309	+	};
310	+
311	+	/*
312		* listen {}:  contains information about the ports ircd listens on
313		*/
314		listen {
315		/*
316	<	* port: the specific port to listen on. If no host is specified
317	<	* before, it will listen on all available IPs.
316	>	* port: the port to listen on. If no host is specified earlier
317	>	* in the listen {} block, it will listen on all available IPs.
318		*
319	<	* Ports are separated via a comma, a range may be specified using ".."
319	>	* Ports are separated by commas; a range may be specified using ".."
320		*/
321	<
322	<	/* port: listen on all available IPs, ports 6665 to 6669 */
321	>
322	>	/* port: listen on all available IP addresses, ports 6665 to 6669 */
323		port = 6665 .. 6669;
324
325		/*
326	<	* Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
326	>	* Listen on 192.168.0.1/6697 with SSL enabled and hidden from STATS P
327		* unless you are an administrator.
328		*
329	<	* NOTE: The "flags" directive has to come before "port". Always!
329	>	* NOTE: The "flags" directive always has to come before "port".
330		*
331		* Currently available flags are:
332		*
#	Line 322 | Line 339 | listen {
339		port = 6697;
340
341		/*
342	<	* host: set a specific IP/host the ports after the line will listen
343	<	* on. This may be ipv4 or ipv6.
342	>	* host: set a specific IP address/host to listen on using the
343	>	* subsequent port definitions. This may be IPv4 or IPv6.
344		*/
345		host = "1.2.3.4";
346		port = 7000, 7001;
#	Line 338 | Line 355 | listen {
355		auth {
356		/*
357		* user: the user@host allowed to connect. Multiple user
358	<	* lines are permitted per auth block.
358	>	* lines are permitted within each auth block.
359		*/
360		user = "*@172.16.0.0/12";
361		user = "*test@123D:B567:*";
#	Line 353 | Line 370 | auth {
370		encrypted = yes;
371
372		/*
373	<	* spoof: fake the users host to this. This is free-form, just do
373	>	* spoof: fake the user's host to this. This is free-form, just do
374		* everyone a favor and don't abuse it. ('=' prefix on /stats I)
375		*/
376		spoof = "I.still.hate.packets";
#	Line 383 | Line 400 | auth {
400		auth {
401		/*
402		* redirect: the server and port to redirect a user to. A user does not
403	<	* have to obey the redirection, the ircd just suggests an alternative
403	>	* have to obey the redirection; the ircd just suggests an alternative
404		* server for them.
405		*/
406		redirserv = "this.is.not.a.real.server";
407		redirport = 6667;
408	<
408	>
409		user = "*.server";
410
411		/* class: a class is required even though it is not used */
#	Line 409 | Line 426 | operator {
426		name = "sheep";
427
428		/*
429	<	* user: the user@host required for this operator. Multiple
430	<	* user="" lines are supported.
429	>	* user: the user@host required for this operator. Multiple user
430	>	* lines are permitted within each operator block.
431		*/
432		user = "*sheep@192.168.0.0/16";
433		user = "*@127.0.0.0/8";
#	Line 420 | Line 437 | operator {
437		* need to be encrypted by using the provided mkpasswd tool.
438		* Several password hash algorithms are available depending
439		* on your system's crypt() implementation. For example, a modern
440	<	* glibc already has support for SHA-256/512, and MD5 encryption
440	>	* glibc already has support for the SHA-256/512 and MD5 encryption
441		* algorithms.
442		*/
443		password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
#	Line 433 | Line 450 | operator {
450
451		/*
452		* rsa_public_key_file: the public key for this oper when using Challenge.
453	<	* A password should not be defined when this is used, see
453	>	* A password should not be defined when this is used; see
454		* doc/challenge.txt for more information.
455		*/
456		#       rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
457
458	+	/*
459	+	* ssl_certificate_fingerprint: enhances security by additionally checking
460	+	* the oper's client certificate fingerprint against the specified
461	+	* fingerprint below.
462	+	*
463	+	* Hint: your users can use the following command to obtain a SHA-256 hash
464	+	* of their ssl certificate:
465	+	*
466	+	*      openssl x509 -sha256 -noout -fingerprint -in cert.pem | sed -e 's/^.*=//;s/://g'
467	+	*/
468	+	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
469	+
470	+	/*
471	+	* ssl_connection_required: client must be connected over SSL/TLS
472	+	* in order to be able to use this oper{} block.
473	+	* Default is 'no' if nothing else is specified.
474	+	*/
475	+	ssl_connection_required = no;
476	+
477		/* class: the class the oper joins when they successfully /oper */
478		class = "opers";
479
480		/*
481	<	* umodes: default usermodes opers get when they /oper. If defined,
481	>	* umodes: the default usermodes opers get when they /oper. If defined,
482		* it will override oper_umodes settings in general {}.
483		* Available usermodes:
484		*
485		* +b - bots         - See bot and drone flooding notices
486		* +c - cconn        - Client connection/quit notices
451	–	* +C - cconn_full   - Client connection/quit notices full
487		* +D - deaf         - Don't receive channel messages
488		* +d - debug        - See debugging notices
489		* +e - external     - See remote server connection and split notices
#	Line 457 | Line 492 | operator {
492		* +G - softcallerid - Server Side Ignore for users not on your channels
493		* +g - callerid     - Server Side Ignore (for privmsgs etc)
494		* +H - hidden       - Hides operator status to other users
495	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
461	<	*                     a channel
495	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
496		* +j - rej          - See rejected client notices
497		* +k - skill        - See server generated KILL messages
498		* +l - locops       - See LOCOPS messages
#	Line 470 | Line 504 | operator {
504		* +y - spy          - See LINKS, STATS, TRACE notices etc.
505		* +z - operwall     - See oper generated WALLOPS
506		*/
507	<	#       umodes = locops, servnotice, operwall, wallop;
507	>	umodes = locops, servnotice, operwall, wallop;
508
509		/*
510	<	* privileges: controls the activities and commands an oper is
510	>	* privileges: controls the activities and commands an oper is
511		* allowed to do on the server. All options default to no.
512		* Available options:
513		*
#	Line 491 | Line 525 | operator {
525		* unkline        - allows UNKLINE                    | ('U' flag)
526		* gline          - allows GLINE                      | ('G' flag)
527		* xline          - allows XLINE                      | ('X' flag)
528	+	* unxline        - allows UNXLINE                    |
529	+	* locops         - allows LOCOPS                     |
530		* globops        - allows GLOBOPS                    |
531	+	* wallops        - allows WALLOPS                    |
532		* operwall       - allows OPERWALL                   | ('L' flag)
533		* rehash         - allows oper to REHASH config      | ('H' flag)
534		* die            - allows DIE                        | ('D' flag)
#	Line 504 | Line 541 | operator {
541		};
542
543		/*
544	<	* service {}: specifies what server may act as a network service
544	>	* service {}: specifies a server which may act as a network service
545		*
546	<	* NOTE: it is absolutely important that every single server on the network
546	>	* NOTE: it is very important that every server on the network
547		*       has the same service{} block.
548		*/
549		service {
#	Line 515 | Line 552 | service {
552		};
553
554		/*
555	<	* connect {}:  controls servers we connect to
555	>	* connect {}: define a server to connect to
556		*/
557		connect {
558		/* name: the name of the server */
559		name = "irc.uplink.com";
560
561		/*
562	<	* host: the host or IP to connect to. If a hostname is used it
563	<	* must match the reverse dns of the server.
562	>	* host: the host or IP address to connect to. If a hostname is used it
563	>	* must match the reverse DNS of the server.
564		*/
565		host = "192.168.0.1";
566
567		/*
568	<	* vhost: the IP to bind to when we connect outward to servers.
568	>	* vhost: the IP address to bind to when making outgoing connections to
569	>	* servers.
570		* serverinfo::vhost and serverinfo::vhost6 will be overridden
571		* by this directive.
572		*/
573		vhost = "192.168.0.2";
574
575		/*
576	<	* passwords: the passwords we send (OLD C:) and accept (OLD N:).
577	<	* The remote server will have these passwords reversed.
576	>	* passwords: the passwords to send (OLD C:) and accept (OLD N:).
577	>	* The remote server will have these passwords swapped.
578		*/
579		send_password = "password";
580		accept_password = "anotherpassword";
#	Line 569 | Line 607 | connect {
607		* ssl_cipher_list:
608		*
609		* List of ciphers that the server we are connecting to must support.
610	<	* If the server isn't capable of any cipher listed below, the
611	<	* connection will simply be rejected.
610	>	* If the server is not capable of using any of the ciphers listed below,
611	>	* the connection will simply be rejected.
612		* Can be used to enforce stronger ciphers, even though this option
613		* is not necessarily required to establish a SSL/TLS connection.
614		*
615		* Multiple ciphers are separated by colons. The order of preference
616		* is from left to right.
617		*/
618	<	#ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
618	>	#       ssl_cipher_list = "ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA:AES256-SHA";
619	>
620	>	/*
621	>	* ssl_certificate_fingerprint: enhances security by additionally checking
622	>	* the server's client certificate fingerprint against the specified
623	>	* fingerprint below.
624	>	*/
625	>	#       ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";
626
627		/*
628		* autoconn   - controls whether we autoconnect to this server or not,
#	Line 608 | Line 653 | connect {
653		*/
654		cluster {
655		/*
656	<	* name: the server to share with, this can take wildcards
656	>	* name: the server to share with; this can take wildcards
657		*
658	<	* NOTE: only local actions will be clustered, meaning if
658	>	* NOTE: only local actions will be clustered, meaning that if
659		*       the server receives a shared kline/unkline/etc, it
660		*       will not be propagated to clustered servers.
661		*
#	Line 621 | Line 666 | cluster {
666		name = "*.arpa";
667
668		/*
669	<	* type: list of what to share, options are as follows:
669	>	* type: list of what to share; options are as follows:
670		*      dline   - share dlines
671		*      undline - share undlines
672		*      kline   - share klines
#	Line 639 | Line 684 | cluster {
684		/*
685		* shared {}: users that are allowed to remote kline
686		*
687	<	* NOTE: This can be effectively used for remote klines.
687	>	* NOTE: This can effectively be used for remote klines.
688		*       Please note that there is no password authentication
689		*       for users setting remote klines. You must also be
690		*       /oper'd in order to issue a remote kline.
691		*/
692		shared {
693		/*
694	<	* name: the server the user must be on to set klines. If this is not
695	<	* specified, the user will be allowed to kline from all servers.
694	>	* name: the server the user must be connected to in order to set klines.
695	>	* If this is not specified, the user will be allowed to kline from all
696	>	* servers.
697		*/
698		name = "irc2.some.server";
699
#	Line 684 | Line 730 | kill {
730		};
731
732		/*
733	<	* deny {}:  IPs that are not allowed to connect (before DNS/ident lookup)
733	>	* deny {}:  IP addresses that are not allowed to connect
734	>	* (before DNS/ident lookup)
735		* Oper issued dlines will be added to the specified dline config
736		*/
737		deny {
#	Line 693 | Line 740 | deny {
740		};
741
742		/*
743	<	* exempt {}:  IPs that are exempt from deny {} and Dlines
743	>	* exempt {}:  IP addresses that are exempt from deny {} and Dlines
744		*/
745		exempt {
746		ip = "192.168.0.0/16";
#	Line 716 | Line 763 | resv { mask = "#*services*"; reason = "R
763		resv {
764		/*
765		* mask: masks starting with a '#' are automatically considered
766	<	* as channel name mask.
766	>	* as channel name masks.
767		*/
768		mask = "#helsinki";
769		reason = "Channel is reserved for finnish inhabitants";
#	Line 748 | Line 795 | gecos {
795		channel {
796		/*
797		* disable_fake_channels: this option, if set to 'yes', will
798	<	* disallow clients to create or join channels that have one
798	>	* disallow clients from creating or joining channels that have one
799		* of the following ASCII characters in their name:
800		*
801		*   2 | bold
#	Line 789 | Line 836 | channel {
836		max_bans = 100;
837
838		/*
839	<	* how many joins in how many seconds constitute a flood, use 0 to
839	>	* how many joins in how many seconds constitute a flood. Use 0 to
840		* disable. +b opers will be notified (changeable via /set)
841		*/
842		join_flood_count = 16;
843		join_flood_time = 8 seconds;
844
845		/*
846	<	* splitcode: The ircd will now check splitmode every few seconds.
846	>	* The ircd will now check splitmode (whether a server is split from
847	>	* the network) every few seconds; this functionality is known as
848	>	* splitcode and is influenced by the options below.
849		*
850		* Either split users or split servers can activate splitmode, but
851		* both conditions must be met for the ircd to deactivate splitmode.
852	<	*
852	>	*
853		* You may force splitmode to be permanent by /quote set splitmode on
854		*/
855
#	Line 816 | Line 865 | channel {
865		*/
866		default_split_server_count = 0;
867
868	<	/* no_create_on_split: disallow users creating channels on split. */
868	>	/* no_create_on_split: do not allow users to create channels on split. */
869		no_create_on_split = yes;
870
871	<	/* no_join_on_split: disallow users joining channels at all on a split. */
871	>	/* no_join_on_split: do not allow users to join channels on a split. */
872		no_join_on_split = no;
873		};
874
875		/*
876		* serverhide {}:  The serverhide block contains the options regarding
877	<	* serverhiding
877	>	* to server hiding
878		*/
879		serverhide {
880		/*
881	+	* disable_remote_commands: disable users issuing commands
882	+	* on remote servers.
883	+	*/
884	+	disable_remote_commands = no;
885	+
886	+	/*
887		* flatten_links: this option will show all servers in /links appear
888	<	* that they are linked to this current server.
888	>	* as though they are linked to this current server.
889		*/
890		flatten_links = no;
891
#	Line 865 | Line 920 | serverhide {
920
921		/*
922		* hide_server_ips: If this is disabled, opers will be unable to see
923	<	* servers ips and will be shown a masked ip, admins will be shown the
924	<	* real ip.
923	>	* servers' IP addresses and will be shown a masked IP address; admins
924	>	* will be shown the real IP address.
925		*
926	<	* If this is enabled, nobody can see a servers ip. *This is a kludge*,
927	<	* it has the side effect of hiding the ips everywhere, including
928	<	* logfiles.
926	>	* If this is enabled, nobody can see a server's IP address.
927	>	* *This is a kludge*: it has the side effect of hiding the IP addresses
928	>	* everywhere, including logfiles.
929		*
930		* We recommend you leave this disabled, and just take care with who you
931		* give administrator privileges to.
#	Line 883 | Line 938 | serverhide {
938		* compiled in options in config.h
939		*/
940		general {
941	+	/*
942	+	* cycle_on_host_change: sends a fake QUIT/JOIN combination
943	+	* when services change the hostname of a specific client.
944	+	*/
945	+	cycle_on_host_change = yes;
946	+
947		/* services_name: servername of nick/channel services */
948		services_name = "service.someserver";
949
950		/* max_watch: maximum WATCH entries a client can have. */
951	<	max_watch = 60;
951	>	max_watch = 50;
952
953	<	/* gline_enable: enable glines, network wide temp klines. */
953	>	/* gline_enable: enable glines (network-wide temporary klines). */
954		gline_enable = yes;
955
956		/*
#	Line 917 | Line 978 | general {
978		gline_min_cidr6 = 48;
979
980		/*
981	<	* Whether to automatically set mode +i on connecting users.
981	>	* invisible_on_connect: whether to automatically set mode +i on
982	>	* connecting users.
983		*/
984		invisible_on_connect = yes;
985
986		/*
987	<	* kill_chase_time_limit: maximum time from the nickname change that
988	<	* still causes KILL automatically to switch for the current nick of
989	<	* that user.
987	>	* kill_chase_time_limit: KILL chasing is a feature whereby a KILL
988	>	* issued for a user who has recently changed nickname will be applied
989	>	* automatically to the new nick. kill_chase_time_limit is the maximum
990	>	* time following a nickname change that this chasing will apply.
991		*/
992	<	kill_chase_time_limit = 90 seconds;
992	>	kill_chase_time_limit = 30 seconds;
993
994		/*
995		* hide_spoof_ips: if disabled, opers will be allowed to see the real
996	<	* IP of spoofed users in /trace etc. If this is defined they will be
997	<	* shown a masked IP.
996	>	* IP address of spoofed users in /trace etc. If this is defined they
997	>	* will be shown a masked IP.
998		*/
999		hide_spoof_ips = yes;
1000
#	Line 949 | Line 1012 | general {
1012		*/
1013		disable_auth = no;
1014
952	–	/* disable_remote_commands: disable users doing commands on remote servers. */
953	–	disable_remote_commands = no;
954	–
1015		/*
1016		* tkline_expire_notices: enables or disables temporary kline/xline
1017		* expire notices.
#	Line 960 | Line 1020 | general {
1020
1021		/*
1022		* default_floodcount: the default value of floodcount that is configurable
1023	<	* via /quote set floodcount. This is the amount of lines a user
1023	>	* via /quote set floodcount. This is the number of lines a user
1024		* may send to any other user/channel in one second.
1025		*/
1026		default_floodcount = 10;
1027
1028		/*
1029	<	* failed_oper_notice: send a notice to all opers on the server when
1029	>	* failed_oper_notice: send a notice to all opers on the server when
1030		* someone tries to OPER and uses the wrong password, host or ident.
1031		*/
1032		failed_oper_notice = yes;
1033
1034		/*
1035	<	* dots_in_ident: the amount of '.' characters permitted in an ident
1035	>	* dots_in_ident: the number of '.' characters permitted in an ident
1036		* reply before the user is rejected.
1037		*/
1038		dots_in_ident = 2;
1039
1040		/*
1041	<	* min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1042	<	* placed via the server. K-lines hand placed are exempt from limits.
1043	<	* wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1041	>	* min_nonwildcard: the minimum number of non-wildcard characters in
1042	>	* k/d/g lines placed via the server. K-lines hand-placed are exempt from
1043	>	* this limit.
1044	>	* Wildcard chars: '.', ':', '*', '?', '@', '!'
1045		*/
1046		min_nonwildcard = 4;
1047
1048		/*
1049	<	* min_nonwildcard_simple: the minimum non wildcard characters in
1050	<	* gecos bans. wildcard chars: '*' '?' '#'
1049	>	* min_nonwildcard_simple: the minimum number of non-wildcard characters
1050	>	* in gecos bans. Wildcard chars: '*', '?'
1051		*/
1052		min_nonwildcard_simple = 3;
1053
1054		/* max_accept: maximum allowed /accept's for +g usermode. */
1055	<	max_accept = 20;
1055	>	max_accept = 50;
1056
1057		/* anti_nick_flood: enable the nickflood control code. */
1058		anti_nick_flood = yes;
1059
1060	<	/* nick flood: the nick changes allowed in the specified period */
1060	>	/* nick flood: the number of nick changes allowed in the specified period */
1061		max_nick_time = 20 seconds;
1062		max_nick_changes = 5;
1063
#	Line 1011 | Line 1072 | general {
1072		* a warning is given, or before the link is dropped. All servers
1073		* should run ntpdate/rdate to keep clocks in sync
1074		*/
1075	<	ts_warn_delta = 30 seconds;
1076	<	ts_max_delta = 5 minutes;
1075	>	ts_warn_delta = 10 seconds;
1076	>	ts_max_delta = 2 minutes;
1077
1078		/*
1079	<	* warn_no_nline: warn opers about servers that try to connect but
1080	<	* we don't have a connect {} block for. Twits with misconfigured
1081	<	* servers can get really annoying with this enabled.
1079	>	* warn_no_connect_block: warn opers about servers that try to connect
1080	>	* but for which we don't have a connect {} block. Twits with
1081	>	* misconfigured servers can become really annoying with this enabled.
1082		*/
1083	<	warn_no_nline = yes;
1083	>	warn_no_connect_block = yes;
1084
1085		/*
1086		* stats_e_disabled: set this to 'yes' to disable "STATS e" for both
#	Line 1035 | Line 1096 | general {
1096		/* stats_P_oper_only: make stats P (ports) oper only */
1097		stats_P_oper_only = yes;
1098
1099	+	/* stats_u_oper_only: make stats u (uptime) oper only */
1100	+	stats_u_oper_only = no;
1101	+
1102		/*
1103	<	* stats i oper only: make stats i (auth {}) oper only. Set to:
1103	>	* stats_i_oper only: make stats i (auth {}) oper only. Set to:
1104		*     yes    - show users no auth blocks, made oper only.
1105	<	*     masked - show users first matching auth block
1105	>	*     masked - show users the first matching auth block
1106		*     no     - show users all auth blocks.
1107		*/
1108		stats_i_oper_only = yes;
#	Line 1046 | Line 1110 | general {
1110		/*
1111		* stats_k_oper_only: make stats k/K (klines) oper only. Set to:
1112		*     yes    - show users no auth blocks, made oper only
1113	<	*     masked - show users first matching auth block
1113	>	*     masked - show users the first matching auth block
1114		*     no     - show users all auth blocks.
1115		*/
1116		stats_k_oper_only = yes;
#	Line 1064 | Line 1128 | general {
1128		opers_bypass_callerid = no;
1129
1130		/*
1131	<	* pace_wait_simple: time between use of less intensive commands
1131	>	* pace_wait_simple: minimum time required between use of less
1132	>	* intensive commands
1133		* (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1134		*/
1135		pace_wait_simple = 1 second;
1136
1137		/*
1138	<	* pace_wait: time between more intensive commands
1138	>	* pace_wait: minimum time required between use of more intensive commands
1139		* (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1140		*/
1141		pace_wait = 10 seconds;
1142
1143		/*
1144	<	* short_motd: send clients a notice telling them to read the motd
1145	<	* instead of forcing a motd to clients who may simply ignore it.
1144	>	* short_motd: send clients a notice telling them to read the MOTD
1145	>	* instead of forcing an MOTD to clients who may simply ignore it.
1146		*/
1147		short_motd = no;
1148
#	Line 1099 | Line 1164 | general {
1164		/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
1165		oper_pass_resv = yes;
1166
1167	<	/* REMOVE ME.  The following line checks you've been reading. */
1167	>	/* REMOVE ME. The following line checks that you have been reading. */
1168		havent_read_conf = 1;
1169
1170		/*
1171	<	* max_targets: the maximum amount of targets in a single
1171	>	* max_targets: the maximum number of targets in a single
1172		* PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1173		*/
1174		max_targets = 4;
#	Line 1113 | Line 1178 | general {
1178		*
1179		* +b - bots         - See bot and drone flooding notices
1180		* +c - cconn        - Client connection/quit notices
1116	–	* +C - cconn_full   - Client connection/quit notices full
1181		* +D - deaf         - Don't receive channel messages
1182		* +d - debug        - See debugging notices
1183		* +e - external     - See remote server connection and split notices
#	Line 1122 | Line 1186 | general {
1186		* +G - softcallerid - Server Side Ignore for users not on your channels
1187		* +g - callerid     - Server Side Ignore (for privmsgs etc)
1188		* +H - hidden       - Hides operator status to other users
1189	<	* +i - invisible    - Not shown in NAMES or WHO unless you share a
1126	<	*                     a channel
1189	>	* +i - invisible    - Not shown in NAMES or WHO unless you share a channel
1190		* +j - rej          - See rejected client notices
1191		* +k - skill        - See server generated KILL messages
1192		* +l - locops       - See LOCOPS messages
#	Line 1137 | Line 1200 | general {
1200		*/
1201
1202		/* oper_only_umodes: usermodes only opers may set */
1203	<	oper_only_umodes = bots, cconn, cconn_full, debug, full, hidden, skill,
1204	<	nchange, rej, spy, external, operwall,
1205	<	locops, unauth, farconnect;
1203	>	oper_only_umodes = bots, cconn, debug, full, hidden, skill,
1204	>	nchange, rej, spy, external, operwall,
1205	>	locops, unauth, farconnect;
1206
1207		/* oper_umodes: default usermodes opers get when they /oper */
1208		oper_umodes = bots, locops, servnotice, operwall, wallop;
#	Line 1158 | Line 1221 | general {
1221		#       egdpool_path = "/var/run/egd-pool";
1222
1223		/*
1224	<	* throttle_time: the minimum amount of time between connections from
1225	<	* the same ip. exempt {} blocks are excluded from this throttling.
1224	>	* throttle_time: the minimum amount of time required between
1225	>	* connections from the same IP address. exempt {} blocks are excluded
1226	>	* from this throttling.
1227		* Offers protection against flooders who reconnect quickly.
1228		* Set to 0 to disable.
1229		*/
1230	<	throttle_time = 10;
1230	>	throttle_time = 10 seconds;
1231		};
1232
1233		modules {
#	Line 1175 | Line 1239 | modules {
1239		path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1240
1241		/* module: the name of a module to load on startup/rehash. */
1242	<	#module = "some_module.la";
1242	>	#       module = "some_module.la";
1243		};
1244
1245		/*
#	Line 1187 | Line 1251 | log {
1251
1252		file {
1253		type = oper;
1254	<	name = "/home/ircd/var/log/oper.log";
1254	>	name = "/usr/local/ircd/var/log/oper.log";
1255		size = unlimited;
1256		};
1257
1258		file {
1259		type = user;
1260	<	name = "/home/ircd/var/log/user.log";
1260	>	name = "/usr/local/ircd/var/log/user.log";
1261		size = 50 megabytes;
1262		};
1263
1264		file {
1265		type = kill;
1266	<	name = "/home/ircd/var/log/kill.log";
1266	>	name = "/usr/local/ircd/var/log/kill.log";
1267		size = 50 megabytes;
1268		};
1269
1270		file {
1271		type = kline;
1272	<	name = "/home/ircd/var/log/kline.log";
1272	>	name = "/usr/local/ircd/var/log/kline.log";
1273		size = 50 megabytes;
1274		};
1275
1276		file {
1277		type = dline;
1278	<	name = "/home/ircd/var/log/dline.log";
1278	>	name = "/usr/local/ircd/var/log/dline.log";
1279		size = 50 megabytes;
1280		};
1281
1282		file {
1283		type = gline;
1284	<	name = "/home/ircd/var/log/gline.log";
1284	>	name = "/usr/local/ircd/var/log/gline.log";
1285	>	size = 50 megabytes;
1286	>	};
1287	>
1288	>	file {
1289	>	type = xline;
1290	>	name = "/usr/local/ircd/var/log/xline.log";
1291	>	size = 50 megabytes;
1292	>	};
1293	>
1294	>	file {
1295	>	type = resv;
1296	>	name = "/usr/local/ircd/var/log/resv.log";
1297		size = 50 megabytes;
1298		};
1299
1300		file {
1301		type = debug;
1302	<	name = "/home/ircd/var/log/debug.log";
1302	>	name = "/usr/local/ircd/var/log/debug.log";
1303		size = 50 megabytes;
1304		};
1305		};

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines (old)
>	Changed lines (new)