| 1 |
-- ircd-hybrid-8.1.14 Release Notes |
| 2 |
o) WHOWAS now honors serverhide::disable_remote_commands |
| 3 |
o) Improved TS6 inter-server communication |
| 4 |
o) Minor code cleanups and speed enhancements |
| 5 |
o) Added 'unxline' oper flag |
| 6 |
o) Added support for "userhost-in-names" client capability |
| 7 |
o) ircd now allows private rsa keys larger than 2048 bits |
| 8 |
o) Fixed bug where signals stopped from working after restarting |
| 9 |
the ircd via SIGINT |
| 10 |
o) Fixed bug where certain irc clients could not reconnect via TLS/SSL |
| 11 |
o) Fixed long-standing bug where +p channels have been shown |
| 12 |
in the /whois reply |
| 13 |
|
| 14 |
|
| 15 |
-- ircd-hybrid-8.1.13 Release Notes |
| 16 |
o) Fixed EOB not working for remote servers (resulted in fake |
| 17 |
direction notices) |
| 18 |
o) Fixed remote client connection notices for servers that are |
| 19 |
more than one hop away |
| 20 |
o) Fixed bug where ircd didn't timeout SSL connections that |
| 21 |
haven't finished the SSL handshake |
| 22 |
o) Fixed several bugs with server hiding |
| 23 |
o) Updated/fixed help files |
| 24 |
o) WHOIS no longer sends a notice to +y operators |
| 25 |
|
| 26 |
|
| 27 |
-- ircd-hybrid-8.1.12 Release Notes |
| 28 |
o) RPL_WHOISMODES now uses the 379 numeric |
| 29 |
o) Serial number is now shown on start up |
| 30 |
o) Fixed possible channel mode desynch with services |
| 31 |
o) Fixed TS6 support with LOCOPS |
| 32 |
o) Minor code cleanups |
| 33 |
o) Fixed file descriptor leak with empty help files |
| 34 |
o) Fixed issue with WEBIRC where hostnames were |
| 35 |
not validated |
| 36 |
|
| 37 |
|
| 38 |
-- ircd-hybrid-8.1.11 Release Notes |
| 39 |
o) Administrators may now see channel modes in /LIST |
| 40 |
o) Fixed compile error on BSD systems when building with kqueue() |
| 41 |
|
| 42 |
|
| 43 |
-- ircd-hybrid-8.1.10 Release Notes |
| 44 |
o) Fixed bug with kqueue() where it occasionally dropped updates |
| 45 |
o) Changed WHOIS to show a client's certificate fingerprint |
| 46 |
to administrators only |
| 47 |
o) The WHO reply now shows whether or not a nickname has |
| 48 |
been registered with NickServ. ('r' status flag) |
| 49 |
o) Fixed some flaws with server hiding |
| 50 |
o) Fixed bug where "STATS P" would leak ip addresses to remotely connected |
| 51 |
administrators, even if serverhide::hide_server_ips was set to 'yes' |
| 52 |
o) Services coders: added SVSKILL |
| 53 |
|
| 54 |
|
| 55 |
-- ircd-hybrid-8.1.9 Release Notes |
| 56 |
o) Added usermode +W. Users connected via a webirc gateway get this |
| 57 |
mode set by servers. |
| 58 |
o) /WHOIS now shows if a client is connected via a webirc |
| 59 |
gateway |
| 60 |
o) Administrators may now see +s channels a user is in with /WHOIS. |
| 61 |
Secret channels are prepended with a tilde in the /WHOIS |
| 62 |
reply. |
| 63 |
o) Administrators are now able to see all the user modes a user has |
| 64 |
set via /whois |
| 65 |
|
| 66 |
|
| 67 |
-- ircd-hybrid-8.1.8 Release Notes |
| 68 |
o) Fixed bug that would lead to a desynchronized nick database |
| 69 |
throughout the entire network if using services enforced |
| 70 |
nick names (SVSNICK) |
| 71 |
o) Cleaned up/modernized build system |
| 72 |
o) Add -fstack-protector to CFLAGS if available. Basically checks for |
| 73 |
buffer overflows/stack-smashing attacks |
| 74 |
o) When using anope 1.9/2.0 services, /WHOIS now shows the account name |
| 75 |
of a registered/identified client (numeric 330) |
| 76 |
o) Administrators can now see +s channels in /LIST |
| 77 |
|
| 78 |
|
| 79 |
-- ircd-hybrid-8.1.7 Release Notes |
| 80 |
o) Fixed issue with channel mode +n having no functionality at all |
| 81 |
o) Fixed SSL certificate fingerprint validation for outgoing server connects |
| 82 |
o) Updated several documentation files |
| 83 |
|
| 84 |
|
| 85 |
-- ircd-hybrid-8.1.6 Release Notes |
| 86 |
o) Fixed possible core with empty motd files |
| 87 |
|
| 88 |
|
| 89 |
-- ircd-hybrid-8.1.5 Release Notes |
| 90 |
o) Fixed bug that would prevent servers from linking together |
| 91 |
if connect::aftype isn't set |
| 92 |
|
| 93 |
|
| 94 |
-- ircd-hybrid-8.1.4 Release Notes |
| 95 |
o) Added 'xline' and 'resv' logging types. See doc/reference.conf |
| 96 |
for more information |
| 97 |
o) Fixed bug where remote /STATS requests were not rate limited |
| 98 |
o) Fixed core with empty auth::spoof entries |
| 99 |
o) Increased oper/auth/connect password length limit from 20 to 128 |
| 100 |
o) Minor fixes to nickflood control code |
| 101 |
|
| 102 |
|
| 103 |
-- ircd-hybrid-8.1.3 Release Notes |
| 104 |
o) Fixed possible core on "STATS z" |
| 105 |
o) Revised doc/reference.conf |
| 106 |
o) Fixed broken --disable-libgeoip switch |
| 107 |
|
| 108 |
|
| 109 |
-- ircd-hybrid-8.1.2 Release Notes |
| 110 |
o) Added general::cycle_on_host_change configuration option |
| 111 |
o) Added general::stats_u_oper_only configuration option |
| 112 |
o) Added support for SHA-256 ssl certificate fingerprint based operator{} |
| 113 |
and connect{} blocks. |
| 114 |
In conjunction with Anope 1.9/2.0 IRC-services, clients are now also able |
| 115 |
to automatically identify for their nick with ssl certificate |
| 116 |
fingerprints |
| 117 |
o) Added operator::ssl_connection_required configuration option. See |
| 118 |
doc/reference.conf for more information |
| 119 |
o) Added usermode +S (client is connected via SSL/TLS). Allows services |
| 120 |
to keep track of what users are connected via SSL, and allows to see |
| 121 |
ssl-status of remote clients in a /whois |
| 122 |
o) Fixed a server name leak with server hiding enabled. Reported by |
| 123 |
Adam <adam@anope.org> |
| 124 |
|
| 125 |
|
| 126 |
-- ircd-hybrid-8.1.1 Release Notes |
| 127 |
######################################################################## |
| 128 |
o) IMPORTANT: moved disable_remote_command configuration directive from |
| 129 |
general{} block to serverhide{} block |
| 130 |
######################################################################## |
| 131 |
o) Minor code cleanups/performance improvements |
| 132 |
o) Fixed bug where opers could see LOCOPS messages even if they don't have |
| 133 |
the +l mode set |
| 134 |
o) Fixed bug where non-SSL clients could join +S channels on non-SSL servers |
| 135 |
o) Implemented motd{} configuration blocks. See doc/reference.conf for more |
| 136 |
information |
| 137 |
o) "STATS T" shows configured MOTD files |
| 138 |
|
| 139 |
|
| 140 |
-- ircd-hybrid-8.1.0 Release Notes |
| 141 |
o) Minor code cleanups/performance improvements |
| 142 |
|
| 143 |
|
| 144 |
-- ircd-hybrid-8.1.0rc1 Release Notes |
| 145 |
o) Fixed broken spoofs |
| 146 |
|
| 147 |
|
| 148 |
-- ircd-hybrid-8.1.0beta5 Release Notes |
| 149 |
o) Removed 'remote', and 'global_kill' oper flags, and added 'connect', |
| 150 |
'squit', and 'kill' flags for better fine-tuning instead. Whether or |
| 151 |
not a specific action is allowed on a remote server can be controlled |
| 152 |
by appending the ':remote' flag. For example: 'kill' allows only local |
| 153 |
clients to be killed, whereas 'kill:remote' allows to issue a KILL for |
| 154 |
remote clients |
| 155 |
o) Added 'locops' and 'wallops' to irc-operator flags |
| 156 |
o) Improve/cleanup HELP system |
| 157 |
|
| 158 |
|
| 159 |
-- ircd-hybrid-8.1.0beta4 Release Notes |
| 160 |
o) Implemented channel mode +M. Clients that haven't identified their |
| 161 |
name with NickServ may not speak in a channel that has this mode set |
| 162 |
o) Fixed weird idletimes shown in /trace |
| 163 |
o) Added 'nononreg' (+R) to general::oper_umodes |
| 164 |
o) Added user mode +F (can see remote client connect/exit notices) |
| 165 |
|
| 166 |
|
| 167 |
-- ircd-hybrid-8.1.0beta3 Release Notes |
| 168 |
o) PCRE support has been dropped |
| 169 |
o) "STATS o" now shows how many times an oper{} block has been used. |
| 170 |
Similar to STATS x|q" |
| 171 |
o) Implemented channel mode +c. Known from other ircds, this mode basically |
| 172 |
prevents users from sending messages including control codes to a channel |
| 173 |
that has this mode set |
| 174 |
o) Fixed bug where bans were not checked against non-channel members when |
| 175 |
sending messages to a channel |
| 176 |
o) Removed channel::quiet_on_ban configuration option. This feature is |
| 177 |
now enabled by default |
| 178 |
|
| 179 |
|
| 180 |
-- ircd-hybrid-8.1.0beta2 Release Notes |
| 181 |
o) Fixed broken compile with libGeoIP disabled |
| 182 |
o) Code cleanups; working towards stabilization and improved performance |
| 183 |
o) Removed operflag 'nick_changes'. Operators can now set +n at will |
| 184 |
o) Fixed shared{} blocks not working as expected |
| 185 |
o) Fixed spoofs not working as expected |
| 186 |
|
| 187 |
|
| 188 |
-- ircd-hybrid-8.1.0beta1 Release Notes |
| 189 |
######################################################################## |
| 190 |
o) IMPORTANT: name/channel entries can't be stacked any longer within |
| 191 |
a single resv{} block. Each entry now requires its own resv{} block. |
| 192 |
Read doc/reference.conf for more details |
| 193 |
####################################################################### |
| 194 |
o) Added resv::exempt configuration option. Exempt can be either a |
| 195 |
ISO 3166 alpha-2 two letter country code, or a nick!user@host mask. |
| 196 |
CIDR is supported |
| 197 |
o) Removed channel::restrict_channels configuration option |
| 198 |
o) Preliminary libGeoIP support. Currently only used for exempt entries |
| 199 |
in resv{} blocks |
| 200 |
o) Improved WEBIRC authentication; added 'webirc' to auth::flags. |
| 201 |
A "webirc." spoof is now no longer required |
| 202 |
o) Implemented new memory pool allocator which basically is based upon Tor's |
| 203 |
mempool allocator for Tor cells |
| 204 |
o) Major code cleanups |
| 205 |
o) Implemented new binary database storage for X-,D-,K-,G-Lines and RESVs. |
| 206 |
Temporary bans are now stored as well and will persist after a reboot |
| 207 |
o) Channel based resv{} blocks may now contain wildcards |
| 208 |
o) NICK/JOIN now shows the actual reason of reserved nick-/channelnames |
| 209 |
o) contrib/ and its content has been removed from the tree |
| 210 |
o) Added serverhide::hide_services configuration option |
| 211 |
o) Added 'nononreg' (+R) to oper::umodes and general::oper_only_modes |
| 212 |
o) Added support for "away-notify" client capability |
| 213 |
|
| 214 |
|
| 215 |
-- ircd-hybrid-8.0.9 Release Notes |
| 216 |
o) Fixed bug where ircd would sometimes drop a services link because |
| 217 |
of a missing argument to the SVSMODE command |
| 218 |
o) Fixed weird idletimes shown in /trace |
| 219 |
|
| 220 |
|
| 221 |
-- ircd-hybrid-8.0.8 Release Notes |
| 222 |
o) "STATS s" now shows configured services{} blocks as well |
| 223 |
o) Fixed compile warnings, minor code cleanups and optimizations |
| 224 |
o) Increased nickname history length to 32768 |
| 225 |
o) Unidentified/unregistered nicks may not speak in +R channels |
| 226 |
|
| 227 |
|
| 228 |
-- ircd-hybrid-8.0.7 Release Notes |
| 229 |
o) Services may now set a channel topic without joining the channel first |
| 230 |
o) Fixed bug where /whois would send empty sockhost information on TS5 |
| 231 |
servers |
| 232 |
o) Remote server connection and split notices now go to new usermode +e. |
| 233 |
These previously used usermode +x. |
| 234 |
o) Services may now change the host of a specific user |
| 235 |
via "SVSMODE <timestamp> <target> +x <hostname>" |
| 236 |
|
| 237 |
|
| 238 |
-- ircd-hybrid-8.0.6 Release Notes |
| 239 |
o) Fix bug where idle time sometimes is 0 even if the client didn't |
| 240 |
send any private message |
| 241 |
o) Fixed possible core in try_parse_v4_netmask() |
| 242 |
|
| 243 |
|
| 244 |
-- ircd-hybrid-8.0.5 Release Notes |
| 245 |
######################################################################## |
| 246 |
o) IMPORTANT: nick and topic lengths are now configurable via ircd.conf. |
| 247 |
A max_nick_length, as well as a max_topic_length configuration option |
| 248 |
can now be found in the serverinfo{} block |
| 249 |
######################################################################## |
| 250 |
o) Fixed build on GNU/Hurd as reported by Dominic Hargreaves |
| 251 |
o) Fixed log files not getting reopened after /rehash |
| 252 |
o) Improved logging of configuration file issues |
| 253 |
o) ircd.pid has been accidentally saved in /var instead of /var/run |
| 254 |
o) Linux RT signal support for notification of socket events has been dropped |
| 255 |
o) Fixed "STATS Y|y" sometimes sending weird sendq/recvq values |
| 256 |
o) INFO now also shows configured values of 'disable_fake_channels', |
| 257 |
and 'stats_e_disabled' |
| 258 |
o) m_webirc.c is now officially supported, and has been moved from contrib/ |
| 259 |
to modules/ |
| 260 |
o) /whois, /stats p, and /trace may now show fake idle times depending on |
| 261 |
how the new class::min_idle and class::max_idle configuration directives |
| 262 |
have been configured. This feature basically works in the same |
| 263 |
way as it does in csircd |
| 264 |
o) The configuration parser now does support 'year' and 'month' units |
| 265 |
|
| 266 |
|
| 267 |
-- ircd-hybrid-8.0.4 Release Notes |
| 268 |
o) Fixed possible core on USERHOST/ISON with optimization enabled |
| 269 |
o) Fixed bug where can_flood sometimes didn't work as expected |
| 270 |
|
| 271 |
|
| 272 |
-- ircd-hybrid-8.0.3 Release Notes |
| 273 |
o) Fixed core on UNDLINE |
| 274 |
o) XLINE/KLINE/RESV/DLINE/SQUIT and KILL now have the same default reason |
| 275 |
if a reason hasn't been specified |
| 276 |
|
| 277 |
|
| 278 |
-- ircd-hybrid-8.0.2 Release Notes |
| 279 |
o) Minor updates to the build system |
| 280 |
o) Fixed broken --enable-assert configure switch |
| 281 |
o) Fixed bug where timed events stopped from working if the system's |
| 282 |
clock is running backwards |
| 283 |
o) STATS q|Q now shows how many times a resv{} block has been matched |
| 284 |
o) Fixed contributed WEBIRC module |
| 285 |
o) IRC operators may now again see server generated nick rejection notices |
| 286 |
|
| 287 |
|
| 288 |
-- ircd-hybrid-8.0.1 Release Notes |
| 289 |
o) Fixed broken CIDR support for CHALLENGE based irc operator logins |
| 290 |
o) Fixed class limits not properly applying to oper{} blocks |
| 291 |
o) Fixed possible TBURST desynchronization with services |
| 292 |
o) Fixed TBURST sending server's name to clients if it's a hidden server |
| 293 |
|
| 294 |
|
| 295 |
-- ircd-hybrid-8.0.0 Release Notes |
| 296 |
o) Fixed an off-by-one with spoofs. Spoofs are now also checked for |
| 297 |
invalid characters |
| 298 |
o) Removed general::use_whois_actually configuration directive. This is |
| 299 |
now enabled by default |
| 300 |
o) Minor SQUIT handling fixes |
| 301 |
o) Fixed bancache not being updated on CHGHOST/CHGIDENT |
| 302 |
|
| 303 |
|
| 304 |
-- ircd-hybrid-8rc1 Release Notes |
| 305 |
o) Removed general::client_flood configuration option and added the |
| 306 |
new 'recvq' configuration directive to class{} blocks. |
| 307 |
The max size of a receive queue can be seen in "STATS Y" |
| 308 |
for each class |
| 309 |
o) Allow the '[' and ']' characters in server description |
| 310 |
|
| 311 |
|
| 312 |
-- ircd-hybrid-8beta3 Release Notes |
| 313 |
o) Fixed wrong syntax in several language files |
| 314 |
o) Removed &localchannels |
| 315 |
o) PRIVMSG to opers@some.server is no longer supported |
| 316 |
o) Fixed bug that could lead to topic desynchronization |
| 317 |
o) Removed serverhide::disable_hidden configuration option |
| 318 |
o) Dropped ircd-hybrid-6 GLINE compatibility mode |
| 319 |
o) Removed use_invex, use_except and use_knock configuration options. |
| 320 |
These features are now enabled by default |
| 321 |
|
| 322 |
|
| 323 |
-- ircd-hybrid-8beta2 Release Notes |
| 324 |
o) channel::disable_fake_channels now also disables ascii 29 (mIRC italic) |
| 325 |
when set to yes |
| 326 |
o) Added channel::max_chans_per_oper configuration directive. The old way |
| 327 |
was to let operators join three times the amount of max_chans_per_user |
| 328 |
o) Replaced MODLOAD, MODUNLOAD, MODRELOAD, MODLIST and MODRESTART commands |
| 329 |
with the new MODULE command which can be fed with the LOAD, UNLOAD, RELOAD |
| 330 |
and LIST parameters. |
| 331 |
MODRESTART has been entirely removed. Use "MODULE RELOAD *" to reload |
| 332 |
all modules |
| 333 |
o) Added back server notice when a client tries to obtain a reserved nick name |
| 334 |
o) Removed OMOTD module |
| 335 |
o) Added 'set' to operator privilege flags. Gives access to the "SET" command |
| 336 |
o) Improved TS6 support |
| 337 |
o) Channel keys/passwords are now case sensitive |
| 338 |
|
| 339 |
|
| 340 |
-- ircd-hybrid-8beta1 Release Notes |
| 341 |
o) Implemented full services support, including but not limited to the |
| 342 |
following changes: |
| 343 |
- Added SVSNICK, and SVSMODE command handlers |
| 344 |
- Added service stamps to NICK/UID messages |
| 345 |
- Added SVS to server capabilities (CAPAB). SVS capable servers can |
| 346 |
deal with extended NICK/UID messages that contain service IDs/stamps. |
| 347 |
- Changed rejected client notices to go to new usermode +j. These |
| 348 |
previously used usermode +r. |
| 349 |
- Added usermode +r (registered nick) and channelmode +r (registered channel) |
| 350 |
- Added usermode +R (only registered clients may send a private message) |
| 351 |
- Added channelmode +R (only registered clients may join that channel) |
| 352 |
- Various services shortcuts have been added (/NS, /CS, /NICKSERV, /CHANSERV, etc.) |
| 353 |
- Added services{} block to ircd.conf |
| 354 |
- Added services_name directive to general{} block |
| 355 |
- Added GLOBOPS mainly for services compatibility, but can be used by operators, too |
| 356 |
o) Removed RKLINE and RXLINE commands. Regular expression based bans should |
| 357 |
only be added via ircd.conf |
| 358 |
o) Added 'globops', 'restart', 'dline', 'undline' and 'module' operator |
| 359 |
privilege flags. Read doc/reference.conf for further explanation of what |
| 360 |
these flags control |
| 361 |
o) Removed Idle-time klines |
| 362 |
o) Cleaned up modules API. Old modules won't work anymore |
| 363 |
o) Removed general::burst_away configuration directive. AWAY bursts are now |
| 364 |
controlled via connect::flags explicitly |
| 365 |
o) Introduced new logging subsystem including log rotation based on |
| 366 |
file sizes. Log timestamp format is ISO8601 now |
| 367 |
o) Added support for remote D-lines |
| 368 |
o) Added usermode +H which is basically a replacement for the hidden_admin and |
| 369 |
hidden_oper operator flags. With usermode +H, irc operator status can now |
| 370 |
be hidden even on remote servers |
| 371 |
o) Added CIDR support for operator{} blocks |
| 372 |
o) Removed the servlink program. ircd-hybrid can now make use of |
| 373 |
SSL/TLS for inter-server communication. |
| 374 |
NOTE: compressed server links are of course still available, but a SSL/TLS |
| 375 |
connection is required, as compression is now handled via OpenSSL |
| 376 |
o) Removed 'ssl_server_protocol' configuration directive and |
| 377 |
added 'ssl_client_method' and 'ssl_server_method' instead. |
| 378 |
Both of these options can now be changed at runtime |
| 379 |
o) Oper login IDs are no longer limited to NICKLEN*2 |
| 380 |
o) Removed channel::burst_topicwho configuration option. Topicsetters are |
| 381 |
now sent by default |
| 382 |
o) "STATS Y|y" now reports CIDR limits as well |
| 383 |
o) Added m_webirc.c to contrib/ |
| 384 |
o) Overall code cleanup and speed improvements |
| 385 |
|
| 386 |
-------------------------------------------------------------------------------- |
| 387 |
|
| 388 |
BUG REPORTS: If you run this code and encounter problems, you must report |
| 389 |
the bug by EMAIL to bugs@ircd-hybrid.org |
| 390 |
Please include a gdb backtrace and a copy of your config.h and |
| 391 |
ircd.conf with any report (with passwords and other sensitive |
| 392 |
information masked). |
| 393 |
|
| 394 |
DISCUSSION: There is a mailing list for discussion of hybrid issues, |
| 395 |
including betas. To subscribe, use this link: |
| 396 |
https://lists.ircd-hybrid.org/mailman/listinfo/hybrid |
| 397 |
This is the proper place to discuss new features, bugs, etc. |
| 398 |
|
| 399 |
Questions/comments directed to bugs@ircd-hybrid.org |
| 400 |
|
| 401 |
Other files recommended for reading: README, INSTALL |
| 402 |
|
| 403 |
-------------------------------------------------------------------------------- |
| 404 |
$Id$ |
