/[svn]/ircd-hybrid-8/etc/example.efnet.conf
ViewVC logotype

Contents of /ircd-hybrid-8/etc/example.efnet.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1290 - (show annotations)
Wed Feb 8 13:02:04 2012 UTC (8 years, 7 months ago) by michael
File size: 38367 byte(s)
- update example config files. usermode 'r' has a different function now

1 /* doc/example.efnet.conf - ircd-hybrid-7 EFnet Example configuration file
2 * Copyright (C) 2000-2011 Hybrid Development Team
3 *
4 * Written by ejb, wcampbel, db, leeh and others
5 * Other example configurations can be found in the source dir under
6 * etc/.
7 *
8 * $Id$
9 */
10
11 /* IMPORTANT NOTES:
12 *
13 * auth {} blocks MUST be specified in order of precedence. The first one
14 * that matches a user will be used. So place spoofs first, then specials,
15 * then general access.
16 *
17 * Shell style (#), C++ style (//) and C style comments are supported.
18 *
19 * Files may be included by either:
20 * .include "filename"
21 * .include <filename>
22 *
23 * Times/durations are written as:
24 * 12 hours 30 minutes 1 second
25 *
26 * Valid units of time:
27 * month, week, day, hour, minute, second
28 *
29 * Valid units of size:
30 * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31 *
32 * Sizes and times may be singular or plural.
33 */
34
35 /* EFNET NOTE:
36 *
37 * This configuration file is a BASIC configuration file for use
38 * on EFnet. You MUST still take the time to set this file up
39 * properly.
40 *
41 * DISCLAIMER: This file was submitted by Disciple@EFnet and has
42 * since been modified by the Hybrid team.
43 */
44
45 /*
46 * serverinfo {}: contains information about the server
47 */
48 serverinfo {
49 /*
50 * name: the name of this server. This cannot be changed at runtime.
51 */
52 name = "efnet.irc";
53
54 /*
55 * sid: a server's unique ID. This is three characters long and must
56 * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
57 * a digit, followed by 2 alpha-numerical letters.
58 * NOTE: The letters must be capitalized. This cannot be changed at runtime.
59 */
60 sid = "_CHANGE_ME_";
61
62 /*
63 * description: the description of the server. '[' and ']' may not
64 * be used here for compatibility with older servers.
65 */
66 description = "hybrid-7 test server";
67
68 /*
69 * network info: the name and description of the network this server
70 * is on. Shown in the 005 reply and used with serverhiding.
71 */
72 network_name = "EFnet";
73 network_desc = "Eris Free Network";
74
75 /*
76 * hub: allow this server to act as a hub and have multiple servers
77 * connected to it.
78 */
79 hub = no;
80
81 /*
82 * vhost: the IP to bind to when we connect outward to ipv4 servers.
83 * This should be an ipv4 IP only, or "*" for INADDR_ANY.
84 */
85 #vhost = "192.169.0.1";
86
87 /*
88 * vhost6: the IP to bind to when we connect outward to ipv6 servers.
89 * This should be an ipv6 IP only, or "*" for INADDR_ANY.
90 */
91 #vhost6 = "3ffe:80e8:546::2";
92
93 /* max_clients: the maximum number of clients allowed to connect */
94 max_clients = 512;
95
96 /*
97 * rsa_private_key_file: the path to the file containing our
98 * rsa key for cryptlink.
99 *
100 * Example command to store a 2048 bit RSA keypair in
101 * rsa.key, and the public key in rsa.pub:
102 *
103 * openssl genrsa -out rsa.key 2048
104 * openssl rsa -in rsa.key -pubout -out rsa.pub
105 * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
106 * chmod 0600 rsa.key
107 * chmod 0644 rsa.pub
108 */
109 #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
110
111 /*
112 * ssl_certificate_file: the path to the file containing our
113 * ssl certificate for encrypted client connection.
114 *
115 * This assumes your private RSA key is stored in rsa.key. You
116 * MUST have an RSA key in order to generate the certificate
117 *
118 * openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
119 *
120 * See http://www.openssl.org/docs/HOWTO/certificates.txt
121 *
122 * Please use the following values when generating the cert
123 *
124 * Organization Name: Network Name
125 * Organization Unit Name: changme.someirc.net
126 * Common Name: irc.someirc.net
127 * E-mail: you@domain.com
128 */
129 #ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
130
131 /*
132 * ssl_server_protocol:
133 * SSL/TLS protocols we provide for incoming secure connections.
134 * This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
135 * SSLv2 is not suppported. This cannot be changed at runtime.
136 */
137 #ssl_server_protocol = sslv3, tlsv1;
138 };
139
140 /*
141 * admin {}: contains admin information about the server
142 */
143 admin {
144 name = "EFnet Admin";
145 description = "Main Server Administrator";
146 email = "<irc-admin@efnet.irc>";
147 };
148
149 /*
150 * class {}: contains information about classes for users
151 */
152 class {
153 /* name: the name of the class. classes are text now */
154 name = "users";
155
156 /*
157 * ping_time: how often a client must reply to a PING from the
158 * server before they are dropped.
159 */
160 ping_time = 90 seconds;
161
162 /*
163 * number_per_ip: how many local users are allowed to connect
164 * from one IP (optional)
165 */
166 number_per_ip = 2;
167
168 /*
169 * max_local: how many local users are allowed to connect
170 * from one ident@host (optional)
171 */
172 max_local = 2;
173
174 /*
175 * max_global: network-wide limit of users per ident@host (optional)
176 */
177 max_global = 10;
178
179 /*
180 * max_number: the maximum number of users allowed in this class (optional)
181 */
182 max_number = 100;
183
184 /*
185 * the following lines are optional and allow you to define
186 * how many users can connect from one /NN subnet
187 */
188 cidr_bitlen_ipv4 = 24;
189 cidr_bitlen_ipv6 = 120;
190 number_per_cidr = 16;
191
192 /*
193 * sendq: the amount of data allowed in a clients queue before
194 * they are dropped.
195 */
196 sendq = 100 kbytes;
197 };
198
199 class {
200 name = "opers";
201
202 /*
203 * contrary to seeming popular belief, setting ping time
204 * higher for an oper is NOT doing them a favor.
205 * Since if a link is dead its dead and it means
206 * you have to use another nick long enough to kill the old one :-)
207 * Its much better to use a fairly standard 90 second ping time
208 */
209 ping_time = 90 seconds;
210 number_per_ip = 10;
211 max_number = 100;
212 sendq = 1 mbyte;
213 };
214
215 class {
216 name = "server";
217
218 /*
219 * Same thing here. It's a fallacy to think increasing
220 * ping time for servers is a "good idea." All it leads to
221 * is "ghosting" on one end. Not a good idea.
222 */
223 ping_time = 90 seconds;
224
225 /*
226 * ping_warning: how fast a server must reply to a PING before
227 * a warning to opers is generated.
228 */
229 ping_warning = 15 seconds;
230
231 /*
232 * connectfreq: only used in server classes. Specifies the delay
233 * between autoconnecting to servers.
234 *
235 * Both comstud and I recommend 10 minutes a few years ago.
236 * 15 minutes might be right now. The reason you don't want it too
237 * low is, you make the servers reconnect too quickly with
238 * a large sendq, and they _will_ nick collide. badly. 5 minutes
239 * IS way too short.
240 */
241 connectfreq = 15 minutes;
242
243 /* max number: the amount of servers to autoconnect to */
244 max_number = 1;
245
246 /* sendq: servers need a higher sendq as they send more data */
247 sendq = 15 megabytes;
248 };
249
250 /*
251 * listen {}: contains information about the ports ircd listens on
252 */
253 listen {
254 /*
255 * port: the specific port to listen on. If no host is specified
256 * before, it will listen on all available IPs.
257 *
258 * Ports are separated via a comma, a range may be specified using ".."
259 */
260
261 /* port: listen on all available IPs, ports 6665 to 6669 */
262 port = 6665 .. 6669;
263
264 /*
265 * Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
266 * unless you are an administrator.
267 *
268 * NOTE: The "flags" directive has to come before "port". Always!
269 *
270 * Currently available flags are:
271 *
272 * ssl - Port is for SSL client connections only
273 * server - Only server connections are permitted
274 * hidden - Port is hidden from /stats P, unless you're an admin
275 */
276 flags = hidden, ssl;
277 host = "192.168.0.1";
278 port = 6697;
279
280 /*
281 * host: set a specific IP/host the ports after the line will listen
282 * on. This may be ipv4 or ipv6.
283 */
284 host = "1.2.3.4";
285 port = 7000, 7001;
286
287 host = "3ffe:1234:a:b:c::d";
288 port = 7002;
289 };
290
291 /*
292 * auth {}: allow users to connect to the ircd
293 */
294 auth {
295 /*
296 * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
297 * lines are permitted per auth block.
298 */
299 user = "*@172.16.0.0/12";
300 user = "*test@123D:B567:*";
301
302 /* password: an optional password that is required to use this block */
303 password = "letmein";
304
305 /*
306 * encrypted: controls whether the auth password above has been
307 * encrypted.
308 */
309 encrypted = yes;
310
311 /*
312 * spoof: fake the users host to this. This is free-form,
313 * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
314 */
315 spoof = "I.still.hate.packets";
316
317 /* class: the class the user is placed in */
318 class = "opers";
319
320 /*
321 * need_password - don't allow users who haven't supplied the correct
322 * password to connect using another auth{} block
323 * ('&' prefix on /stats I if disabled)
324 * need_ident - require the user to have identd to connect ('+' prefix on /stats I)
325 * spoof_notice - enable spoofing notification to admins
326 * exceed_limit - allow a user to exceed class limits ('>' prefix on /stats I)
327 * kline_exempt - exempt this user from k/glines ('^' prefix on /stats I)
328 * gline_exempt - exempt this user from glines ('_' prefix on /stats I)
329 * resv_exempt - exempt this user from resvs ('$' prefix on /stats I)
330 * no_tilde - remove ~ from a user with no ident ('-' prefix on /stats I)
331 * can_flood - allow this user to exceed flood limits ('|' prefix on /stats I)
332 */
333 flags = need_password, spoof_notice, exceed_limit, kline_exempt,
334 gline_exempt, resv_exempt, no_tilde, can_flood;
335 };
336
337 auth {
338 /*
339 * redirect: the server and port to redirect a user to. A user does
340 * not have to obey the redirection, the ircd just suggests an alternative
341 * server for them.
342 */
343 redirserv = "this.is.not.a.real.server";
344 redirport = 6667;
345
346 user = "*.server";
347
348 /* class: a class is required even though it is not used */
349 class = "users";
350 };
351
352 auth {
353 user = "*@*";
354 class = "users";
355 flags = need_ident;
356 };
357
358 /*
359 * operator {}: defines ircd operators
360 *
361 * ircd-hybrid no longer supports local operators, privileges are
362 * controlled via flags.
363 */
364 operator {
365 /* name: the name of the oper */
366 name = "god";
367
368 /*
369 * user: the user@host required for this operator. CIDR is not
370 * supported. Multiple user="" lines are supported.
371 */
372 user = "*god@192.168.0.0/16";
373 user = "*@127.0.0.0/8";
374
375 /*
376 * password: the password required to oper. By default this will
377 * need to be encrypted by using the provided mkpasswd tool.
378 * Several password hash algorithms are available depending
379 * on your system's crypt() implementation. For example, a modern
380 * glibc already has support for SHA-256/512, and MD5 encryption
381 * algorithms.
382 */
383 password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
384
385 /*
386 * encrypted: controls whether the oper password above has been
387 * encrypted.
388 */
389 encrypted = yes;
390
391 /*
392 * rsa_public_key_file: the public key for this oper when using Challenge.
393 * A password should not be defined when this is used, see
394 * doc/challenge.txt for more information.
395 */
396 # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
397
398 /* class: the class the oper joins when they successfully /oper */
399 class = "opers";
400
401 /*
402 * umodes: default usermodes opers get when they /oper. If defined,
403 * it will override oper_umodes settings in general {}.
404 * Available usermodes:
405 *
406 * +b - bots - See bot and drone flooding notices
407 * +c - cconn - Client connection/quit notices
408 * +C - cconn_full - Client connection/quit notices full
409 * +D - deaf - Don't receive channel messages
410 * +d - debug - See debugging notices
411 * +f - full - See I: line full notices
412 * +G - softcallerid - Server Side Ignore for users not on your channels
413 * +g - callerid - Server Side Ignore (for privmsgs etc)
414 * +i - invisible - Not shown in NAMES or WHO unless you share a
415 * a channel
416 * +j - rej - See rejected client notices
417 * +k - skill - See server generated KILL messages
418 * +l - locops - See LOCOPS messages
419 * +n - nchange - See client nick changes
420 * +s - servnotice - See general server notices
421 * +u - unauth - See unauthorized client notices
422 * +w - wallop - See server generated WALLOPS
423 * +x - external - See remote server connection and split notices
424 * +y - spy - See LINKS, STATS, TRACE notices etc.
425 * +z - operwall - See oper generated WALLOPS
426 */
427 # umodes = locops, servnotice, operwall, wallop;
428
429 /*
430 * privileges: controls the activities and commands an oper is
431 * allowed to do on the server. All options default to no.
432 * Available options:
433 *
434 * module - allows MODLIST, MODRESTART, MODLOAD, MODUNLOAD
435 * global_kill - allows remote users to be /KILL'd
436 * remote - allows remote SQUIT and CONNECT
437 * remoteban - allows remote KLINE/UNKLINE
438 * kline - allows KILL, KLINE and DLINE
439 * unkline - allows UNKLINE and UNDLINE
440 * gline - allows GLINE
441 * xline - allows XLINE
442 * globops - allows GLOBOPS
443 * operwall - allows OPERWALL
444 * nick_changes - allows oper to see nickchanges via usermode +n
445 * rehash - allows oper to REHASH config
446 * die - allows DIE
447 * restart - allows RESTART
448 * admin - gives admin privileges. admins for example,
449 * may see the real IP addresses of servers.
450 * hidden_admin - same as 'admin', but noone can recognize you as
451 * being an admin
452 * hidden_oper - not shown in /stats p (except for other operators)
453 */
454 flags = global_kill, remote, kline, unkline, xline, globops, restart,
455 die, rehash, nick_changes, admin, operwall, module;
456 };
457
458 /*
459 * connect {}: controls servers we connect to
460 */
461 connect {
462 /* name: the name of the server */
463 name = "irc.uplink.com";
464
465 /*
466 * host: the host or IP to connect to. If a hostname is used it
467 * must match the reverse dns of the server.
468 */
469 host = "192.168.0.1";
470
471 /*
472 * vhost: the IP to bind to when we connect outward to servers.
473 * serverinfo::vhost and serverinfo::vhost6 will be overridden
474 * by this directive.
475 */
476 vhost = "192.168.0.2";
477
478 /*
479 * passwords: the passwords we send (OLD C:) and accept (OLD N:).
480 * The remote server will have these passwords reversed.
481 */
482 send_password = "password";
483 accept_password = "anotherpassword";
484
485 /*
486 * encrypted: controls whether the accept_password above has been
487 * encrypted.
488 */
489 encrypted = no;
490
491 /* port: the port to connect to this server on */
492 port = 6666;
493
494 /*
495 * hub_mask: the mask of servers that this server may hub. Multiple
496 * entries are permitted
497 */
498 hub_mask = "*";
499
500 /*
501 * leaf_mask: the mask of servers this server may not hub. Multiple
502 * entries are permitted. Useful for forbidding EU -> US -> EU routes.
503 */
504 # leaf_mask = "*.uk";
505
506 /* class: the class this server is in */
507 class = "server";
508
509 /*
510 * autoconn - controls whether we autoconnect to this server or not,
511 * dependent on class limits. By default, this is disabled.
512 * compressed - controls whether traffic is compressed via ziplinks.
513 * By default, this is disabled
514 * cryptlink - enable full encryption for all data passing between our
515 * server and this link and rsa authentication.
516 * burst_away - This will send the /away string that users have set
517 * on the server burst. Note this can be a lot of data
518 * and slow down your server burst.
519 * topicburst - Send topics to this server during channel burst. Works
520 * only if the server we are connecting to is capable
521 * of TBURST/TB.
522 */
523 # flags = autoconn, compressed, cryptlink, burst_away, topicburst;
524 };
525
526 connect {
527 name = "encrypted.auth.example";
528 host = "some.host.somewhere";
529 port = 6667;
530
531 flags = cryptlink;
532
533 /*
534 * rsa_public_key_file: the path to the public keyfile of the server.
535 * Used instead of passwords.
536 */
537 rsa_public_key_file = "etc/remote.server.keyfile";
538
539 /*
540 * cipher preference: set the preferred cipher for this link
541 *
542 * Available ciphers are:
543 * BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
544 * RC5.12/128 RC5.8/128 3DES/168 DES/56
545 *
546 * NOTE: Some ciphers may not be supported by your OpenSSL.
547 * Check the output from 'configure' for available ciphers.
548 *
549 * NOTE2: To help you decide what cipher to use, tools/encspeed
550 * will show you approximately how fast each cipher is.
551 * However, blowfish is fast and secure, and is probably
552 * a good default for most situations.
553 *
554 * NOTE3: Default if none is set is BF/128
555 *
556 * The cipher *MUST* be the same in both directions. If you
557 * set a cipher preference, your uplink must set the same cipher,
558 * else it will not link.
559 */
560 # cipher_preference = "BF/168";
561 };
562
563 connect "ipv6.some.server" {
564 name = "ipv6.some.server";
565 host = "3ffd:dead:beef::1";
566 send_password = "password";
567 accept_password = "password";
568 port = 6666;
569
570 /*
571 * aftype: controls whether the connection uses "ipv4" or "ipv6".
572 * Default is ipv4.
573 */
574 aftype = ipv6;
575 class = "server";
576 };
577
578 /*
579 * cluster {}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
580 * automatically
581 */
582 cluster {
583 /*
584 * name: the server to share with, this can take wildcards
585 *
586 * NOTE: only local actions will be clustered, meaning if
587 * the server receives a shared kline/unkline/etc, it
588 * will not be propagated to clustered servers.
589 *
590 * Remote servers are not necessarily required to accept
591 * clustered lines, they need a shared{} for *THIS* server
592 * in order to accept them.
593 */
594 name = "*.arpa";
595
596 /*
597 * type: list of what to share, options are as follows:
598 * kline - share klines
599 * tkline - share temporary klines
600 * unkline - share unklines
601 * xline - share xlines
602 * txline - share temporary xlines
603 * unxline - share unxlines
604 * resv - share resvs
605 * tresv - share temporary resvs
606 * unresv - share unresvs
607 * locops - share locops
608 * all - share all of the above (default)
609 */
610 type = kline, unkline, locops, xline, resv;
611 };
612
613 /*
614 * shared {}: users that are allowed to remote kline
615 *
616 * NOTE: This can be effectively used for remote klines.
617 * Please note that there is no password authentication
618 * for users setting remote klines. You must also be
619 * /oper'd in order to issue a remote kline.
620 */
621 shared {
622 /*
623 * name: the server the user must be on to set klines. If this is not
624 * specified, the user will be allowed to kline from all servers.
625 */
626 name = "irc2.some.server";
627
628 /*
629 * user: the user@host mask that is allowed to set klines. If this is
630 * not specified, all users on the server above will be allowed to set
631 * a remote kline.
632 */
633 user = "oper@my.host.is.spoofed";
634
635 /*
636 * type: list of what to share, options are as follows:
637 * kline - allow oper/server to kline
638 * tkline - allow temporary klines
639 * unkline - allow oper/server to unkline
640 * xline - allow oper/server to xline
641 * txline - allow temporary xlines
642 * unxline - allow oper/server to unxline
643 * resv - allow oper/server to resv
644 * tresv - allow temporary resvs
645 * unresv - allow oper/server to unresv
646 * locops - allow oper/server to locops - only used for servers that cluster
647 * all - allow oper/server to do all of the above (default)
648 */
649 type = kline, unkline, resv;
650 };
651
652 /*
653 * kill {}: users that are not allowed to connect
654 * Oper issued klines will be added to the specified kline config
655 */
656 kill {
657 user = "bad@*.hacked.edu";
658 reason = "Obviously hacked account";
659 };
660
661 kill {
662 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
663
664 /*
665 * NOTE: You have to set type=regex; when using a regular expression
666 * based user entry
667 */
668 type = regex;
669 };
670
671 /*
672 * deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
673 * Oper issued dlines will be added to the specified dline config
674 */
675 deny {
676 ip = "10.0.1.0/24";
677 reason = "Reconnecting vhosted bots";
678 };
679
680 /*
681 * exempt {}: IPs that are exempt from deny {} and Dlines.
682 *
683 * EFnet Note: We really suggest to enable general::stats_e_disabled
684 * if you plan to exempt EFnet server IPs you don't want to show to
685 * other operators and/or administrators through "STATS e".
686 */
687 exempt {
688 ip = "192.168.0.0/16";
689 };
690
691 /*
692 * resv {}: nicks and channels users may not use/join
693 */
694 resv {
695 /* reason: the reason for the proceeding resv's */
696 reason = "There are no services on this network";
697
698 /* resv: the nicks and channels users may not join/use */
699 nick = "nickserv";
700 nick = "chanserv";
701 nick = "operserv";
702 nick = "JUPES";
703 nick = "JUPE";
704 nick = "CH?NF?X"; # CHANFIX (services.int)
705
706 /* These are totally optional, but may be a good idea */
707 nick = "oper";
708 nick = "ircop";
709 nick = "op";
710 nick = "ident";
711 nick = "pass";
712 channel = "#jupedchan";
713
714 /* resv: wildcard masks are also supported in nicks only */
715 reason = "Clone bots";
716 nick = "clone*";
717 };
718
719 /*
720 * gecos {}: The X: replacement, used for banning users based on
721 * their "realname".
722 */
723 gecos {
724 name = "*sex*";
725 reason = "Possible spambot";
726 };
727
728 gecos {
729 name = "sub7server";
730 reason = "Trojan drone";
731 };
732
733 gecos {
734 name = "*http*";
735 reason = "Spambot";
736 };
737
738 gecos {
739 name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
740
741 /*
742 * NOTE: You have to set type=regex; when using a regular expression
743 * based name entry
744 */
745 type = regex;
746 };
747
748 /*
749 * channel {}: The channel block contains options pertaining to channels
750 */
751 channel {
752 /*
753 * disable_fake_channels: this option, if set to 'yes', will
754 * disallow clients to create or join channels that have one
755 * of the following ASCII characters in their name:
756 *
757 * 2 | bold
758 * 3 | mirc color
759 * 15 | plain text
760 * 22 | reverse
761 * 31 | underline
762 * 160 | non-breaking space
763 */
764 disable_fake_channels = yes;
765
766 /*
767 * restrict_channels: reverse channel RESVs logic, only reserved
768 * channels are allowed
769 */
770 restrict_channels = no;
771
772 /*
773 * disable_local_channels: prevent users from joining &channels.
774 */
775 disable_local_channels = no;
776
777 /*
778 * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
779 * that can join a +i channel without an invite.
780 */
781 use_invex = yes;
782
783 /*
784 * use_except: Enable/disable channel mode +e, a n!u@h list of masks
785 * that can join a channel through a ban (+b).
786 */
787 use_except = yes;
788
789 /*
790 * use_knock: Allows users to request an invite to a channel that
791 * is locked somehow (+ikl). If the channel is +p or you are banned
792 * the knock will not be sent.
793 *
794 * EFnet Note: This seems to be used mostly by European servers
795 * and not North American ones.
796 * Please feel free to disable this if you do not
797 * want to run channel knock.
798 * channel knock allows an user to "/quote knock #channel"
799 * to ask for an invite. It is typically used in eu-efnet
800 * to ask for an invite to #eu-opers.
801 * A user who is banned will not have their knock
802 * sent to channel. It is paced, so knock will not
803 * cause a flood.
804 */
805 use_knock = yes;
806
807 /*
808 * knock_delay: The amount of time a user must wait between issuing
809 * the knock command.
810 */
811 knock_delay = 5 minutes;
812
813 /*
814 * knock_delay_channel: How often a knock to any specific channel
815 * is permitted, regardless of the user sending the knock.
816 */
817 knock_delay_channel = 1 minute;
818
819 /*
820 * burst_topicwho: enable sending of who set topic on topicburst
821 * default is yes
822 */
823 burst_topicwho = yes;
824
825 /*
826 * max_chans_per_user: The maximum number of channels a user can
827 * join/be on.
828 */
829 max_chans_per_user = 25;
830
831 /* quiet_on_ban: stop banned people talking in channels. */
832 quiet_on_ban = yes;
833
834 /* max_bans: maximum number of +b/e/I modes in a channel */
835 max_bans = 100;
836
837 /*
838 * how many joins in how many seconds constitute a flood, use 0 to
839 * disable. +b opers will be notified (changeable via /set)
840 */
841 join_flood_count = 16;
842 join_flood_time = 8 seconds;
843
844 /*
845 * splitcode: The ircd will now check splitmode every few seconds.
846 *
847 * Either split users or split servers can activate splitmode, but
848 * both conditions must be met for the ircd to deactivate splitmode.
849 *
850 * You may force splitmode to be permanent by /quote set splitmode on
851 */
852
853 /*
854 * default_split_user_count: when the usercount is lower than this level,
855 * consider ourselves split. This must be set for automatic splitmode.
856 */
857 default_split_user_count = 20000;
858
859 /*
860 * default_split_server_count: when the servercount is lower than this,
861 * consider ourselves split. This must be set for automatic splitmode.
862 */
863 default_split_server_count = 10;
864
865 /* no_create_on_split: disallow users creating channels on split. */
866 no_create_on_split = yes;
867
868 /* no_join_on_split: disallow users joining channels at all on a split. */
869 no_join_on_split = no;
870 };
871
872 /*
873 * serverhide {}: The serverhide block contains the options regarding
874 * serverhiding
875 */
876 serverhide {
877 /*
878 * flatten_links: this option will show all servers in /links appear
879 * that they are linked to this current server
880 *
881 * EFnet Note: While this is not a requirement on EFnet, it
882 * may be a good idea. Except, it's useless
883 * unless the entire net runs it.
884 */
885 flatten_links = no;
886
887 /*
888 * links_delay: how often to update the links file when it is
889 * flattened.
890 */
891 links_delay = 5 minutes;
892
893 /*
894 * hidden: hide this server from a /links output on servers that
895 * support it. This allows hub servers to be hidden etc.
896 */
897 hidden = no;
898
899 /*
900 * disable_hidden: prevent servers hiding themselves from a
901 * /links output.
902 */
903 disable_hidden = no;
904
905 /*
906 * hide_servers: hide remote servernames everywhere and instead use
907 * hidden_name and network_desc.
908 */
909 hide_servers = no;
910
911 /*
912 * Use this as the servername users see if hide_servers = yes.
913 */
914 hidden_name = "*.hidden.com";
915
916 /*
917 * hide_server_ips: If this is disabled, opers will be unable to see
918 * servers ips and will be shown a masked ip, admins will be shown the
919 * real ip.
920 *
921 * If this is enabled, nobody can see a servers ip. *This is a kludge*,
922 * it has the side effect of hiding the ips everywhere, including
923 * logfiles.
924 *
925 * We recommend you leave this disabled, and just take care with who you
926 * give admin=yes; to.
927 */
928 hide_server_ips = yes;
929 };
930
931 /*
932 * general {}: The general block contains many of the options that were once
933 * compiled in options in config.h. The general block is read at start time.
934 */
935 general {
936 /* max_watch: maximum WATCH entries a client can have. */
937 max_watch = 60;
938
939 /*
940 * gline_min_cidr: the minimum required length of a CIDR bitmask
941 * for IPv4 based glines
942 */
943 gline_min_cidr = 16;
944
945 /*
946 * gline_min_cidr6: the minimum required length of a CIDR bitmask
947 * for IPv6 based glines
948 */
949 gline_min_cidr6 = 48;
950
951 /*
952 * Whether to automatically set mode +i on connecting users.
953 */
954 invisible_on_connect = yes;
955
956 /*
957 * Show "actually using host <ip>" on /whois when possible.
958 */
959 use_whois_actually = yes;
960
961 /*
962 * Max time from the nickname change that still causes KILL
963 * automatically to switch for the current nick of that user.
964 */
965 kill_chase_time_limit = 90 seconds;
966
967 /*
968 * If hide_spoof_ips is disabled, opers will be allowed to see the real
969 * IP of spoofed users in /trace etc. If this is defined they will be
970 * shown a masked IP.
971 */
972 hide_spoof_ips = yes;
973
974 /*
975 * Ignore bogus timestamps from other servers. Yes, this will desync
976 * the network, but it will allow chanops to resync with a valid non TS 0
977 *
978 * This should be enabled network wide, or not at all.
979 */
980 ignore_bogus_ts = no;
981
982 /*
983 * disable_auth: completely disable ident lookups; if you enable this,
984 * be careful of what you set need_ident to in your auth {} blocks
985 */
986 disable_auth = no;
987
988 /* disable_remote_commands: disable users doing commands on remote servers */
989 disable_remote_commands = no;
990
991 /*
992 * tkline_expire_notices: enables or disables temporary kline/xline
993 * expire notices.
994 */
995 tkline_expire_notices = no;
996
997 /*
998 * default_floodcount: the default value of floodcount that is configurable
999 * via /quote set floodcount. This is the amount of lines a user
1000 * may send to any other user/channel in one second.
1001 */
1002 default_floodcount = 10;
1003
1004 /*
1005 * failed_oper_notice: send a notice to all opers on the server when
1006 * someone tries to OPER and uses the wrong password, host or ident.
1007 */
1008 failed_oper_notice = yes;
1009
1010 /*
1011 * dots_in_ident: the amount of '.' characters permitted in an ident
1012 * reply before the user is rejected.
1013 */
1014 dots_in_ident = 2;
1015
1016 /*
1017 * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1018 * placed via the server. klines hand placed are exempt from limits.
1019 * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1020 */
1021 min_nonwildcard = 3;
1022
1023 /*
1024 * min_nonwildcard_simple: the minimum non wildcard characters in
1025 * gecos bans. wildcard chars: '*' '?' '#'
1026 */
1027 min_nonwildcard_simple = 3;
1028
1029 /* max_accept: maximum allowed /accept's for +g usermode */
1030 max_accept = 20;
1031
1032 /* anti_nick_flood: enable the nickflood control code */
1033 anti_nick_flood = yes;
1034
1035 /* nick flood: the nick changes allowed in the specified period */
1036 max_nick_time = 20 seconds;
1037 max_nick_changes = 5;
1038
1039 /*
1040 * anti_spam_exit_message_time: the minimum time a user must be connected
1041 * before custom quit messages are allowed.
1042 */
1043 anti_spam_exit_message_time = 5 minutes;
1044
1045 /*
1046 * ts delta: the time delta allowed between server clocks before
1047 * a warning is given, or before the link is dropped. all servers
1048 * should run ntpdate/rdate to keep clocks in sync
1049 */
1050 ts_warn_delta = 30 seconds;
1051 ts_max_delta = 5 minutes;
1052
1053 /*
1054 * kline_with_reason: show the user the reason why they are k/d/glined
1055 * on exit. May give away who set k/dline when set via tcm.
1056 */
1057 kline_with_reason = yes;
1058
1059 /*
1060 * kline_reason: show this message to users on channel
1061 * instead of the oper reason.
1062 */
1063 kline_reason = "Connection closed";
1064
1065 /*
1066 * reject_hold_time: wait this amount of time before disconnecting
1067 * a rejected client. Use 0 to disable.
1068 */
1069 reject_hold_time = 30 seconds;
1070
1071 /*
1072 * warn_no_nline: warn opers about servers that try to connect but
1073 * we don't have a connect {} block for. Twits with misconfigured
1074 * servers can get really annoying with this enabled.
1075 */
1076 warn_no_nline = yes;
1077
1078 /*
1079 * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1080 * operators and administrators. Doing so is a good idea in case
1081 * there are any exempted (exempt{}) server IPs you don't want to
1082 * see leaked.
1083 */
1084 stats_e_disabled = no;
1085
1086 /* stats_o_oper only: make stats o (opers) oper only */
1087 stats_o_oper_only = yes;
1088
1089 /* stats_P_oper_only: make stats P (ports) oper only */
1090 stats_P_oper_only = yes;
1091
1092 /*
1093 * stats i oper only: make stats i (auth {}) oper only. set to:
1094 * yes: show users no auth blocks, made oper only.
1095 * masked: show users first matching auth block
1096 * no: show users all auth blocks.
1097 */
1098 stats_i_oper_only = yes;
1099
1100 /*
1101 * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1102 * yes: show users no auth blocks, made oper only
1103 * masked: show users first matching auth block
1104 * no: show users all auth blocks.
1105 */
1106 stats_k_oper_only = yes;
1107
1108 /*
1109 * caller_id_wait: time between notifying a +g user that somebody
1110 * is messaging them.
1111 */
1112 caller_id_wait = 1 minute;
1113
1114 /*
1115 * opers_bypass_callerid: allows operators to bypass +g and message
1116 * anyone who has it set (useful if you use services).
1117 */
1118 opers_bypass_callerid = no;
1119
1120 /*
1121 * pace_wait_simple: time between use of less intensive commands
1122 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1123 */
1124 pace_wait_simple = 1 second;
1125
1126 /*
1127 * pace_wait: time between more intensive commands
1128 * (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1129 */
1130 pace_wait = 10 seconds;
1131
1132 /*
1133 * short_motd: send clients a notice telling them to read the motd
1134 * instead of forcing a motd to clients who may simply ignore it.
1135 */
1136 short_motd = no;
1137
1138 /*
1139 * ping_cookie: require clients to respond exactly to a ping command,
1140 * can help block certain types of drones and FTP PASV mode spoofing.
1141 */
1142 ping_cookie = no;
1143
1144 /* no_oper_flood: increase flood limits for opers. */
1145 no_oper_flood = yes;
1146
1147 /*
1148 * true_no_oper_flood: completely eliminate flood limits for opers
1149 * and for clients with can_flood = yes in their auth {} blocks
1150 */
1151 true_no_oper_flood = yes;
1152
1153 /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1154 oper_pass_resv = yes;
1155
1156 /* REMOVE ME. The following line checks you've been reading. */
1157 havent_read_conf = 1;
1158
1159 /*
1160 * max_targets: the maximum amount of targets in a single
1161 * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1162 */
1163 max_targets = 4;
1164
1165 /*
1166 * client_flood: maximum amount of data in a clients queue before
1167 * they are dropped for flooding.
1168 */
1169 client_flood = 2560 bytes;
1170
1171 /*
1172 * message_locale: the default message locale
1173 * Use "standard" for the compiled in defaults.
1174 * To install the translated messages, go into messages/ in the
1175 * source directory and run `make install'.
1176 */
1177 message_locale = "standard";
1178
1179 /*
1180 * usermodes configurable: a list of usermodes for the options below
1181 *
1182 * +b - bots - See bot and drone flooding notices
1183 * +c - cconn - Client connection/quit notices
1184 * +C - cconn_full - Client connection/quit notices full
1185 * +D - deaf - Don't receive channel messages
1186 * +d - debug - See debugging notices
1187 * +f - full - See I: line full notices
1188 * +G - softcallerid - Server Side Ignore for users not on your channels
1189 * +g - callerid - Server Side Ignore (for privmsgs etc)
1190 * +i - invisible - Not shown in NAMES or WHO unless you share a
1191 * a channel
1192 * +j - rej - See rejected client notices
1193 * +k - skill - See server generated KILL messages
1194 * +l - locops - See LOCOPS messages
1195 * +n - nchange - See client nick changes
1196 * +s - servnotice - See general server notices
1197 * +u - unauth - See unauthorized client notices
1198 * +w - wallop - See server generated WALLOPS
1199 * +x - external - See remote server connection and split notices
1200 * +y - spy - See LINKS, STATS, TRACE notices etc.
1201 * +z - operwall - See oper generated WALLOPS
1202 */
1203
1204 /* oper_only_umodes: usermodes only opers may set */
1205 oper_only_umodes = bots, cconn, cconn_full, debug, full, skill,
1206 nchange, rej, spy, external, operwall,
1207 locops, unauth;
1208
1209 /* oper_umodes: default usermodes opers get when they /oper */
1210 oper_umodes = bots, locops, servnotice, operwall, wallop;
1211
1212 /*
1213 * servlink_path: path to 'servlink' program used by ircd to handle
1214 * encrypted/compressed server <-> server links.
1215 *
1216 * only define if servlink is not in same directory as ircd itself.
1217 */
1218 #servlink_path = "/usr/local/ircd/bin/servlink";
1219
1220 /*
1221 * default_cipher_preference: default cipher to use for cryptlink when none is
1222 * specified in connect block.
1223 */
1224 #default_cipher_preference = "BF/168";
1225
1226 /*
1227 * use_egd: if your system does not have *random devices yet you
1228 * want to use OpenSSL and encrypted links, enable this. Beware -
1229 * EGD is *very* CPU intensive when gathering data for its pool
1230 */
1231 # use_egd = yes;
1232
1233 /*
1234 * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1235 * which automatically finds the path.
1236 */
1237 # egdpool_path = "/var/run/egd-pool";
1238
1239
1240 /*
1241 * compression_level: level of compression for compressed links between
1242 * servers.
1243 *
1244 * values are between: 1 (least compression, fastest)
1245 * and: 9 (most compression, slowest).
1246 */
1247 # compression_level = 6;
1248
1249 /*
1250 * throttle_time: the minimum amount of time between connections from
1251 * the same ip. exempt {} blocks are excluded from this throttling.
1252 * Offers protection against flooders who reconnect quickly.
1253 * Set to 0 to disable.
1254 */
1255 throttle_time = 0;
1256 };
1257
1258 glines {
1259 /*
1260 * EFnet Note: This feature is required for European EFnet servers
1261 * and is used by several North American servers. As
1262 * such, it has been left on by default. If you
1263 * do not want your server to participate in G:Lines
1264 * you should disable this.
1265 */
1266
1267 /* enable: enable glines, network wide temp klines */
1268 enable = yes;
1269
1270 /*
1271 * duration: the amount of time a gline will remain on your
1272 * server before expiring
1273 */
1274 duration = 1 day;
1275
1276 /*
1277 * log: which types of rules you want to log when triggered
1278 * (choose reject or block)
1279 */
1280 log = reject, block;
1281
1282 /*
1283 * NOTE: gline ACLs can cause a desync of glines throughout the
1284 * network, meaning some servers may have a gline triggered, and
1285 * others may not. Also, you only need insert rules for glines
1286 * that you want to block and/or reject. If you want to accept and
1287 * propagate the gline, do NOT put a rule for it.
1288 */
1289
1290 /* user@host for rule to apply to */
1291 user = "god@I.still.hate.packets";
1292 /* server for rule to apply to */
1293 name = "hades.arpa";
1294
1295 /*
1296 * action: action to take when a matching gline is found. options are:
1297 * reject - do not apply the gline locally
1298 * block - do not propagate the gline
1299 */
1300 action = reject, block;
1301
1302 user = "god@*";
1303 name = "*";
1304 action = block;
1305 };
1306
1307 modules {
1308 /*
1309 * path: other paths to search for modules specified below
1310 * and in /modload.
1311 */
1312 path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1313 path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1314
1315 /* module: the name of a module to load on startup/rehash */
1316 #module = "some_module.la";
1317 };
1318
1319 /*
1320 * log {}: contains information about logfiles.
1321 */
1322 log {
1323 /* Do you want to enable logging to ircd.log? */
1324 use_logging = yes;
1325 timestamp = yes;
1326
1327 file {
1328 type = oper;
1329 name = "/home/ircd/var/log/oper.log";
1330 size = unlimited;
1331 };
1332
1333 file {
1334 type = user;
1335 name = "/home/ircd/var/log/user.log";
1336 size = 50 megabytes;
1337 };
1338
1339 file {
1340 type = kill;
1341 name = "/home/ircd/var/log/kill.log";
1342 size = 50 megabytes;
1343 };
1344
1345 file {
1346 type = kline;
1347 name = "/home/ircd/var/log/kline.log";
1348 size = 50 megabytes;
1349 };
1350
1351 file {
1352 type = dline;
1353 name = "/home/ircd/var/log/dline.log";
1354 size = 50 megabytes;
1355 };
1356
1357 file {
1358 type = gline;
1359 name = "/home/ircd/var/log/gline.log";
1360 size = 50 megabytes;
1361 };
1362
1363 file {
1364 type = debug;
1365 name = "/home/ircd/var/log/debug.log";
1366 size = 50 megabytes;
1367 };
1368 };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28