/[svn]/ircd-hybrid-8/doc/example.efnet.conf
ViewVC logotype

Contents of /ircd-hybrid-8/doc/example.efnet.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1441 - (show annotations)
Wed Jun 20 19:05:27 2012 UTC (8 years, 1 month ago) by michael
File size: 37568 byte(s)
- Update documents

1 /* doc/example.efnet.conf - ircd-hybrid-8 EFnet Example configuration file
2 * Copyright (C) 2000-2012 Hybrid Development Team
3 *
4 * Written by ejb, wcampbel, db, leeh and others
5 * Other example configurations can be found in the source dir under
6 * etc/.
7 *
8 * $Id$
9 */
10
11 /* IMPORTANT NOTES:
12 *
13 * auth {} blocks MUST be specified in order of precedence. The first one
14 * that matches a user will be used. So place spoofs first, then specials,
15 * then general access.
16 *
17 * Shell style (#), C++ style (//) and C style comments are supported.
18 *
19 * Files may be included by either:
20 * .include "filename"
21 * .include <filename>
22 *
23 * Times/durations are written as:
24 * 12 hours 30 minutes 1 second
25 *
26 * Valid units of time:
27 * month, week, day, hour, minute, second
28 *
29 * Valid units of size:
30 * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31 *
32 * Sizes and times may be singular or plural.
33 */
34
35 /* EFNET NOTE:
36 *
37 * This configuration file is a BASIC configuration file for use
38 * on EFnet. You MUST still take the time to set this file up
39 * properly.
40 *
41 * DISCLAIMER: This file was submitted by Disciple@EFnet and has
42 * since been modified by the Hybrid team.
43 */
44
45 /*
46 * serverinfo {}: contains information about the server
47 */
48 serverinfo {
49 /*
50 * name: the name of this server. This cannot be changed at runtime.
51 */
52 name = "efnet.irc";
53
54 /*
55 * sid: a server's unique ID. This is three characters long and must
56 * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
57 * a digit, followed by 2 alpha-numerical letters.
58 * NOTE: The letters must be capitalized. This cannot be changed at runtime.
59 */
60 sid = "_CHANGE_ME_";
61
62 /*
63 * description: the description of the server. '[' and ']' may not
64 * be used here for compatibility with older servers.
65 */
66 description = "hybrid-7 test server";
67
68 /*
69 * network info: the name and description of the network this server
70 * is on. Shown in the 005 reply and used with serverhiding.
71 */
72 network_name = "EFnet";
73 network_desc = "Eris Free Network";
74
75 /*
76 * hub: allow this server to act as a hub and have multiple servers
77 * connected to it.
78 */
79 hub = no;
80
81 /*
82 * vhost: the IP to bind to when we connect outward to ipv4 servers.
83 * This should be an ipv4 IP only, or "*" for INADDR_ANY.
84 */
85 #vhost = "192.169.0.1";
86
87 /*
88 * vhost6: the IP to bind to when we connect outward to ipv6 servers.
89 * This should be an ipv6 IP only, or "*" for INADDR_ANY.
90 */
91 #vhost6 = "3ffe:80e8:546::2";
92
93 /* max_clients: the maximum number of clients allowed to connect */
94 max_clients = 512;
95
96 /*
97 * rsa_private_key_file: the path to the file containing our
98 * rsa key for cryptlink.
99 *
100 * Example command to store a 2048 bit RSA keypair in
101 * rsa.key, and the public key in rsa.pub:
102 *
103 * openssl genrsa -out rsa.key 2048
104 * openssl rsa -in rsa.key -pubout -out rsa.pub
105 * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
106 * chmod 0600 rsa.key
107 * chmod 0644 rsa.pub
108 */
109 #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
110
111 /*
112 * ssl_certificate_file: the path to the file containing our
113 * ssl certificate for encrypted client connection.
114 *
115 * This assumes your private RSA key is stored in rsa.key. You
116 * MUST have an RSA key in order to generate the certificate
117 *
118 * openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
119 *
120 * See http://www.openssl.org/docs/HOWTO/certificates.txt
121 *
122 * Please use the following values when generating the cert
123 *
124 * Organization Name: Network Name
125 * Organization Unit Name: changme.someirc.net
126 * Common Name: irc.someirc.net
127 * E-mail: you@domain.com
128 */
129 #ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
130
131 /*
132 * ssl_dh_param_file:
133 *
134 * Path to the PEM encoded Diffie-Hellman parameter file.
135 * DH parameters are strictly required when using ciphers
136 * with EDH (ephemeral Diffie-Hellman) key exchange.
137 *
138 * A DH parameter file can be created by running:
139 *
140 * openssl dhparam -out dhparam.pem 1024
141 *
142 * Further information regarding specific OpenSSL dhparam
143 * command-line options can be found in the OpenSSL manual.
144 */
145 #ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
146
147 /*
148 * ssl_cipher_list:
149 *
150 * List of ciphers that are supported by _this_ server. Can be used to enforce
151 * specific ciphers for incoming SSL/TLS connections.
152 * If a client (which also includes incoming server connections) isn't capable
153 * of any cipher listed below, the connection will simply be rejected.
154 *
155 * A list of supported ciphers can be obtained by running:
156 *
157 * openssl ciphers -ssl3 -tls1 -v
158 *
159 * Multiple ciphers are separated by colons. The order of preference is from
160 * left to right.
161 */
162 #ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
163
164 /*
165 * ssl_server_method:
166 * ssl_client_method:
167 *
168 * SSL/TLS methods we provide for incoming (server method) and
169 * outgoing (client method) SSL/TLS connections.
170 * This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
171 * SSLv2 is not suppported.
172 */
173 #ssl_server_method = tlsv1, sslv3;
174 #ssl_client_method = tlsv1;
175 };
176
177 /*
178 * admin {}: contains admin information about the server
179 */
180 admin {
181 name = "EFnet Admin";
182 description = "Main Server Administrator";
183 email = "<irc-admin@efnet.irc>";
184 };
185
186 /*
187 * class {}: contains information about classes for users
188 */
189 class {
190 /* name: the name of the class. classes are text now */
191 name = "users";
192
193 /*
194 * ping_time: how often a client must reply to a PING from the
195 * server before they are dropped.
196 */
197 ping_time = 90 seconds;
198
199 /*
200 * number_per_ip: how many local users are allowed to connect
201 * from one IP (optional)
202 */
203 number_per_ip = 2;
204
205 /*
206 * max_local: how many local users are allowed to connect
207 * from one ident@host (optional)
208 */
209 max_local = 2;
210
211 /*
212 * max_global: network-wide limit of users per ident@host (optional)
213 */
214 max_global = 10;
215
216 /*
217 * max_number: the maximum number of users allowed in this class (optional)
218 */
219 max_number = 100;
220
221 /*
222 * the following lines are optional and allow you to define
223 * how many users can connect from one /NN subnet
224 */
225 cidr_bitlen_ipv4 = 24;
226 cidr_bitlen_ipv6 = 120;
227 number_per_cidr = 16;
228
229 /*
230 * sendq: the amount of data allowed in a clients queue before
231 * they are dropped.
232 */
233 sendq = 100 kbytes;
234 };
235
236 class {
237 name = "opers";
238
239 /*
240 * contrary to seeming popular belief, setting ping time
241 * higher for an oper is NOT doing them a favor.
242 * Since if a link is dead its dead and it means
243 * you have to use another nick long enough to kill the old one :-)
244 * Its much better to use a fairly standard 90 second ping time
245 */
246 ping_time = 90 seconds;
247 number_per_ip = 10;
248 max_number = 100;
249 sendq = 1 mbyte;
250 };
251
252 class {
253 name = "server";
254
255 /*
256 * Same thing here. It's a fallacy to think increasing
257 * ping time for servers is a "good idea." All it leads to
258 * is "ghosting" on one end. Not a good idea.
259 */
260 ping_time = 90 seconds;
261
262 /*
263 * ping_warning: how fast a server must reply to a PING before
264 * a warning to opers is generated.
265 */
266 ping_warning = 15 seconds;
267
268 /*
269 * connectfreq: only used in server classes. Specifies the delay
270 * between autoconnecting to servers.
271 *
272 * Both comstud and I recommend 10 minutes a few years ago.
273 * 15 minutes might be right now. The reason you don't want it too
274 * low is, you make the servers reconnect too quickly with
275 * a large sendq, and they _will_ nick collide. badly. 5 minutes
276 * IS way too short.
277 */
278 connectfreq = 15 minutes;
279
280 /* max number: the amount of servers to autoconnect to */
281 max_number = 1;
282
283 /* sendq: servers need a higher sendq as they send more data */
284 sendq = 15 megabytes;
285 };
286
287 /*
288 * listen {}: contains information about the ports ircd listens on
289 */
290 listen {
291 /*
292 * port: the specific port to listen on. If no host is specified
293 * before, it will listen on all available IPs.
294 *
295 * Ports are separated via a comma, a range may be specified using ".."
296 */
297
298 /* port: listen on all available IPs, ports 6665 to 6669 */
299 port = 6665 .. 6669;
300
301 /*
302 * Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
303 * unless you are an administrator.
304 *
305 * NOTE: The "flags" directive has to come before "port". Always!
306 *
307 * Currently available flags are:
308 *
309 * ssl - Port is for SSL client connections only
310 * server - Only server connections are permitted
311 * hidden - Port is hidden from /stats P, unless you're an admin
312 */
313 flags = hidden, ssl;
314 host = "192.168.0.1";
315 port = 6697;
316
317 /*
318 * host: set a specific IP/host the ports after the line will listen
319 * on. This may be ipv4 or ipv6.
320 */
321 host = "1.2.3.4";
322 port = 7000, 7001;
323
324 host = "3ffe:1234:a:b:c::d";
325 port = 7002;
326 };
327
328 /*
329 * auth {}: allow users to connect to the ircd
330 */
331 auth {
332 /*
333 * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
334 * lines are permitted per auth block.
335 */
336 user = "*@172.16.0.0/12";
337 user = "*test@123D:B567:*";
338
339 /* password: an optional password that is required to use this block */
340 password = "letmein";
341
342 /*
343 * encrypted: controls whether the auth password above has been
344 * encrypted.
345 */
346 encrypted = yes;
347
348 /*
349 * spoof: fake the users host to this. This is free-form,
350 * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
351 */
352 spoof = "I.still.hate.packets";
353
354 /* class: the class the user is placed in */
355 class = "opers";
356
357 /*
358 * need_password - don't allow users who haven't supplied the correct
359 * password to connect using another auth{} block
360 * ('&' prefix on /stats I if disabled)
361 * need_ident - require the user to have identd to connect ('+' prefix on /stats I)
362 * spoof_notice - enable spoofing notification to admins
363 * exceed_limit - allow a user to exceed class limits ('>' prefix on /stats I)
364 * kline_exempt - exempt this user from k/glines ('^' prefix on /stats I)
365 * gline_exempt - exempt this user from glines ('_' prefix on /stats I)
366 * resv_exempt - exempt this user from resvs ('$' prefix on /stats I)
367 * no_tilde - remove ~ from a user with no ident ('-' prefix on /stats I)
368 * can_flood - allow this user to exceed flood limits ('|' prefix on /stats I)
369 */
370 flags = need_password, spoof_notice, exceed_limit, kline_exempt,
371 gline_exempt, resv_exempt, no_tilde, can_flood;
372 };
373
374 auth {
375 /*
376 * redirect: the server and port to redirect a user to. A user does
377 * not have to obey the redirection, the ircd just suggests an alternative
378 * server for them.
379 */
380 redirserv = "this.is.not.a.real.server";
381 redirport = 6667;
382
383 user = "*.server";
384
385 /* class: a class is required even though it is not used */
386 class = "users";
387 };
388
389 auth {
390 user = "*@*";
391 class = "users";
392 flags = need_ident;
393 };
394
395 /*
396 * operator {}: defines ircd operators
397 *
398 * ircd-hybrid no longer supports local operators, privileges are
399 * controlled via flags.
400 */
401 operator {
402 /* name: the name of the oper */
403 name = "god";
404
405 /*
406 * user: the user@host required for this operator. Multiple
407 * user="" lines are supported.
408 */
409 user = "*god@192.168.0.0/16";
410 user = "*@127.0.0.0/8";
411
412 /*
413 * password: the password required to oper. By default this will
414 * need to be encrypted by using the provided mkpasswd tool.
415 * Several password hash algorithms are available depending
416 * on your system's crypt() implementation. For example, a modern
417 * glibc already has support for SHA-256/512, and MD5 encryption
418 * algorithms.
419 */
420 password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
421
422 /*
423 * encrypted: controls whether the oper password above has been
424 * encrypted.
425 */
426 encrypted = yes;
427
428 /*
429 * rsa_public_key_file: the public key for this oper when using Challenge.
430 * A password should not be defined when this is used, see
431 * doc/challenge.txt for more information.
432 */
433 # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
434
435 /* class: the class the oper joins when they successfully /oper */
436 class = "opers";
437
438 /*
439 * umodes: default usermodes opers get when they /oper. If defined,
440 * it will override oper_umodes settings in general {}.
441 * Available usermodes:
442 *
443 * +b - bots - See bot and drone flooding notices
444 * +c - cconn - Client connection/quit notices
445 * +C - cconn_full - Client connection/quit notices full
446 * +D - deaf - Don't receive channel messages
447 * +d - debug - See debugging notices
448 * +f - full - See auth{} block full notices
449 * +G - softcallerid - Server Side Ignore for users not on your channels
450 * +g - callerid - Server Side Ignore (for privmsgs etc)
451 * +H - hidden - Hides operator status to other users
452 * +i - invisible - Not shown in NAMES or WHO unless you share a
453 * a channel
454 * +j - rej - See rejected client notices
455 * +k - skill - See server generated KILL messages
456 * +l - locops - See LOCOPS messages
457 * +n - nchange - See client nick changes
458 * +s - servnotice - See general server notices
459 * +u - unauth - See unauthorized client notices
460 * +w - wallop - See server generated WALLOPS
461 * +x - external - See remote server connection and split notices
462 * +y - spy - See LINKS, STATS, TRACE notices etc.
463 * +z - operwall - See oper generated WALLOPS
464 */
465 # umodes = locops, servnotice, operwall, wallop;
466
467 /*
468 * privileges: controls the activities and commands an oper is
469 * allowed to do on the server. All options default to no.
470 * Available options:
471 *
472 * module - allows MODULE
473 * global_kill - allows remote users to be /KILL'd
474 * remote - allows remote SQUIT and CONNECT
475 * remoteban - allows remote KLINE/UNKLINE
476 * dline - allows DLINE
477 * undline - allows UNDLINE
478 * kline - allows KILL and KLINE
479 * unkline - allows UNKLINE
480 * gline - allows GLINE
481 * xline - allows XLINE
482 * globops - allows GLOBOPS
483 * operwall - allows OPERWALL
484 * nick_changes - allows oper to see nickchanges via usermode +n
485 * rehash - allows oper to REHASH config
486 * die - allows DIE
487 * restart - allows RESTART
488 * admin - gives admin privileges. admins for example,
489 * may see the real IP addresses of servers.
490 */
491 flags = global_kill, remote, kline, unkline, xline, globops, restart,
492 die, rehash, nick_changes, admin, operwall, module;
493 };
494
495 /*
496 * connect {}: controls servers we connect to
497 */
498 connect {
499 /* name: the name of the server */
500 name = "irc.uplink.com";
501
502 /*
503 * host: the host or IP to connect to. If a hostname is used it
504 * must match the reverse dns of the server.
505 */
506 host = "192.168.0.1";
507
508 /*
509 * vhost: the IP to bind to when we connect outward to servers.
510 * serverinfo::vhost and serverinfo::vhost6 will be overridden
511 * by this directive.
512 */
513 vhost = "192.168.0.2";
514
515 /*
516 * passwords: the passwords we send (OLD C:) and accept (OLD N:).
517 * The remote server will have these passwords reversed.
518 */
519 send_password = "password";
520 accept_password = "anotherpassword";
521
522 /*
523 * encrypted: controls whether the accept_password above has been
524 * encrypted.
525 */
526 encrypted = no;
527
528 /* port: the port to connect to this server on */
529 port = 6666;
530
531 /*
532 * hub_mask: the mask of servers that this server may hub. Multiple
533 * entries are permitted
534 */
535 hub_mask = "*";
536
537 /*
538 * leaf_mask: the mask of servers this server may not hub. Multiple
539 * entries are permitted. Useful for forbidding EU -> US -> EU routes.
540 */
541 # leaf_mask = "*.uk";
542
543 /* class: the class this server is in */
544 class = "server";
545
546 #ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
547
548 /*
549 * autoconn - controls whether we autoconnect to this server or not,
550 * dependent on class limits. By default, this is disabled.
551 * burst_away - This will send the /away string that users have set
552 * on the server burst. Note this can be a lot of data
553 * and slow down your server burst.
554 * topicburst - Send topics to this server during channel burst. Works
555 * only if the server we are connecting to is capable
556 * of TBURST/TB.
557 * ssl - Initiates a TLS/SSL connection.
558 */
559 # flags = autoconn, burst_away, topicburst;
560 };
561
562 connect {
563 name = "ipv6.some.server";
564 host = "3ffd:dead:beef::1";
565 send_password = "password";
566 accept_password = "password";
567 port = 6666;
568
569 /*
570 * aftype: controls whether the connection uses "ipv4" or "ipv6".
571 * Default is ipv4.
572 */
573 aftype = ipv6;
574 class = "server";
575 };
576
577 /*
578 * cluster {}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
579 * automatically
580 */
581 cluster {
582 /*
583 * name: the server to share with, this can take wildcards
584 *
585 * NOTE: only local actions will be clustered, meaning if
586 * the server receives a shared kline/unkline/etc, it
587 * will not be propagated to clustered servers.
588 *
589 * Remote servers are not necessarily required to accept
590 * clustered lines, they need a shared{} for *THIS* server
591 * in order to accept them.
592 */
593 name = "*.arpa";
594
595 /*
596 * type: list of what to share, options are as follows:
597 * dline - share dlines
598 * undline - share undlines
599 * kline - share klines
600 * unkline - share unklines
601 * xline - share xlines
602 * unxline - share unxlines
603 * resv - share resvs
604 * unresv - share unresvs
605 * locops - share locops
606 * all - share all of the above (default)
607 */
608 type = kline, unkline, locops, xline, resv;
609 };
610
611 /*
612 * shared {}: users that are allowed to remote kline
613 *
614 * NOTE: This can be effectively used for remote klines.
615 * Please note that there is no password authentication
616 * for users setting remote klines. You must also be
617 * /oper'd in order to issue a remote kline.
618 */
619 shared {
620 /*
621 * name: the server the user must be on to set klines. If this is not
622 * specified, the user will be allowed to kline from all servers.
623 */
624 name = "irc2.some.server";
625
626 /*
627 * user: the user@host mask that is allowed to set klines. If this is
628 * not specified, all users on the server above will be allowed to set
629 * a remote kline.
630 */
631 user = "oper@my.host.is.spoofed";
632
633 /*
634 * type: list of what to share, options are as follows:
635 * dline - allow oper/server to dline
636 * undline - allow oper/server to undline
637 * kline - allow oper/server to kline
638 * unkline - allow oper/server to unkline
639 * xline - allow oper/server to xline
640 * unxline - allow oper/server to unxline
641 * resv - allow oper/server to resv
642 * unresv - allow oper/server to unresv
643 * locops - allow oper/server to locops - only used for servers that cluster
644 * all - allow oper/server to do all of the above (default)
645 */
646 type = kline, unkline, resv;
647 };
648
649 /*
650 * kill {}: users that are not allowed to connect
651 * Oper issued klines will be added to the specified kline config
652 */
653 kill {
654 user = "bad@*.hacked.edu";
655 reason = "Obviously hacked account";
656 };
657
658 kill {
659 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
660
661 /*
662 * NOTE: You have to set type=regex; when using a regular expression
663 * based user entry
664 */
665 type = regex;
666 };
667
668 /*
669 * deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
670 * Oper issued dlines will be added to the specified dline config
671 */
672 deny {
673 ip = "10.0.1.0/24";
674 reason = "Reconnecting vhosted bots";
675 };
676
677 /*
678 * exempt {}: IPs that are exempt from deny {} and Dlines.
679 *
680 * EFnet Note: We really suggest to enable general::stats_e_disabled
681 * if you plan to exempt EFnet server IPs you don't want to show to
682 * other operators and/or administrators through "STATS e".
683 */
684 exempt {
685 ip = "192.168.0.0/16";
686 };
687
688 /*
689 * resv {}: nicks and channels users may not use/join
690 */
691 resv {
692 /* reason: the reason for the proceeding resv's */
693 reason = "There are no services on this network";
694
695 /* resv: the nicks and channels users may not join/use */
696 nick = "nickserv";
697 nick = "chanserv";
698 nick = "operserv";
699 nick = "JUPES";
700 nick = "JUPE";
701 nick = "CH?NF?X"; # CHANFIX (services.int)
702
703 /* These are totally optional, but may be a good idea */
704 nick = "oper";
705 nick = "ircop";
706 nick = "op";
707 nick = "ident";
708 nick = "pass";
709 channel = "#jupedchan";
710
711 /* resv: wildcard masks are also supported in nicks only */
712 reason = "Clone bots";
713 nick = "clone*";
714 };
715
716 /*
717 * gecos {}: The X: replacement, used for banning users based on
718 * their "realname".
719 */
720 gecos {
721 name = "*sex*";
722 reason = "Possible spambot";
723 };
724
725 gecos {
726 name = "sub7server";
727 reason = "Trojan drone";
728 };
729
730 gecos {
731 name = "*http*";
732 reason = "Spambot";
733 };
734
735 gecos {
736 name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
737
738 /*
739 * NOTE: You have to set type=regex; when using a regular expression
740 * based name entry
741 */
742 type = regex;
743 };
744
745 /*
746 * channel {}: The channel block contains options pertaining to channels
747 */
748 channel {
749 /*
750 * disable_fake_channels: this option, if set to 'yes', will
751 * disallow clients to create or join channels that have one
752 * of the following ASCII characters in their name:
753 *
754 * 2 | bold
755 * 3 | mirc color
756 * 15 | plain text
757 * 22 | reverse
758 * 29 | italic
759 * 31 | underline
760 * 160 | non-breaking space
761 */
762 disable_fake_channels = yes;
763
764 /*
765 * restrict_channels: reverse channel RESVs logic, only reserved
766 * channels are allowed
767 */
768 restrict_channels = no;
769
770 /*
771 * disable_local_channels: prevent users from joining &channels.
772 */
773 disable_local_channels = no;
774
775 /*
776 * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
777 * that can join a +i channel without an invite.
778 */
779 use_invex = yes;
780
781 /*
782 * use_except: Enable/disable channel mode +e, a n!u@h list of masks
783 * that can join a channel through a ban (+b).
784 */
785 use_except = yes;
786
787 /*
788 * use_knock: Allows users to request an invite to a channel that
789 * is locked somehow (+ikl). If the channel is +p or you are banned
790 * the knock will not be sent.
791 *
792 * EFnet Note: This seems to be used mostly by European servers
793 * and not North American ones.
794 * Please feel free to disable this if you do not
795 * want to run channel knock.
796 * channel knock allows an user to "/quote knock #channel"
797 * to ask for an invite. It is typically used in eu-efnet
798 * to ask for an invite to #eu-opers.
799 * A user who is banned will not have their knock
800 * sent to channel. It is paced, so knock will not
801 * cause a flood.
802 */
803 use_knock = yes;
804
805 /*
806 * knock_delay: The amount of time a user must wait between issuing
807 * the knock command.
808 */
809 knock_delay = 5 minutes;
810
811 /*
812 * knock_delay_channel: How often a knock to any specific channel
813 * is permitted, regardless of the user sending the knock.
814 */
815 knock_delay_channel = 1 minute;
816
817 /*
818 * max_chans_per_user: The maximum number of channels a user can
819 * join/be on.
820 */
821 max_chans_per_user = 25;
822
823 /*
824 * max_chans_per_oper: The maximum number of channels an oper can
825 * join/be on.
826 */
827 max_chans_per_oper = 50;
828
829 /* quiet_on_ban: stop banned people talking in channels. */
830 quiet_on_ban = yes;
831
832 /* max_bans: maximum number of +b/e/I modes in a channel */
833 max_bans = 100;
834
835 /*
836 * how many joins in how many seconds constitute a flood, use 0 to
837 * disable. +b opers will be notified (changeable via /set)
838 */
839 join_flood_count = 16;
840 join_flood_time = 8 seconds;
841
842 /*
843 * splitcode: The ircd will now check splitmode every few seconds.
844 *
845 * Either split users or split servers can activate splitmode, but
846 * both conditions must be met for the ircd to deactivate splitmode.
847 *
848 * You may force splitmode to be permanent by /quote set splitmode on
849 */
850
851 /*
852 * default_split_user_count: when the usercount is lower than this level,
853 * consider ourselves split. This must be set for automatic splitmode.
854 */
855 default_split_user_count = 20000;
856
857 /*
858 * default_split_server_count: when the servercount is lower than this,
859 * consider ourselves split. This must be set for automatic splitmode.
860 */
861 default_split_server_count = 10;
862
863 /* no_create_on_split: disallow users creating channels on split. */
864 no_create_on_split = yes;
865
866 /* no_join_on_split: disallow users joining channels at all on a split. */
867 no_join_on_split = no;
868 };
869
870 /*
871 * serverhide {}: The serverhide block contains the options regarding
872 * serverhiding
873 */
874 serverhide {
875 /*
876 * flatten_links: this option will show all servers in /links appear
877 * that they are linked to this current server
878 *
879 * EFnet Note: While this is not a requirement on EFnet, it
880 * may be a good idea. Except, it's useless
881 * unless the entire net runs it.
882 */
883 flatten_links = no;
884
885 /*
886 * links_delay: how often to update the links file when it is
887 * flattened.
888 */
889 links_delay = 5 minutes;
890
891 /*
892 * hidden: hide this server from a /links output on servers that
893 * support it. This allows hub servers to be hidden etc.
894 */
895 hidden = no;
896
897 /*
898 * disable_hidden: prevent servers hiding themselves from a
899 * /links output.
900 */
901 disable_hidden = no;
902
903 /*
904 * hide_servers: hide remote servernames everywhere and instead use
905 * hidden_name and network_desc.
906 */
907 hide_servers = no;
908
909 /*
910 * Use this as the servername users see if hide_servers = yes.
911 */
912 hidden_name = "*.hidden.com";
913
914 /*
915 * hide_server_ips: If this is disabled, opers will be unable to see
916 * servers ips and will be shown a masked ip, admins will be shown the
917 * real ip.
918 *
919 * If this is enabled, nobody can see a servers ip. *This is a kludge*,
920 * it has the side effect of hiding the ips everywhere, including
921 * logfiles.
922 *
923 * We recommend you leave this disabled, and just take care with who you
924 * give admin=yes; to.
925 */
926 hide_server_ips = yes;
927 };
928
929 /*
930 * general {}: The general block contains many of the options that were once
931 * compiled in options in config.h. The general block is read at start time.
932 */
933 general {
934 /* max_watch: maximum WATCH entries a client can have. */
935 max_watch = 60;
936
937 /*
938 * gline_min_cidr: the minimum required length of a CIDR bitmask
939 * for IPv4 based glines
940 */
941 gline_min_cidr = 16;
942
943 /*
944 * gline_min_cidr6: the minimum required length of a CIDR bitmask
945 * for IPv6 based glines
946 */
947 gline_min_cidr6 = 48;
948
949 /*
950 * Whether to automatically set mode +i on connecting users.
951 */
952 invisible_on_connect = yes;
953
954 /*
955 * Show "actually using host <ip>" on /whois when possible.
956 */
957 use_whois_actually = yes;
958
959 /*
960 * Max time from the nickname change that still causes KILL
961 * automatically to switch for the current nick of that user.
962 */
963 kill_chase_time_limit = 90 seconds;
964
965 /*
966 * If hide_spoof_ips is disabled, opers will be allowed to see the real
967 * IP of spoofed users in /trace etc. If this is defined they will be
968 * shown a masked IP.
969 */
970 hide_spoof_ips = yes;
971
972 /*
973 * Ignore bogus timestamps from other servers. Yes, this will desync
974 * the network, but it will allow chanops to resync with a valid non TS 0
975 *
976 * This should be enabled network wide, or not at all.
977 */
978 ignore_bogus_ts = no;
979
980 /*
981 * disable_auth: completely disable ident lookups; if you enable this,
982 * be careful of what you set need_ident to in your auth {} blocks
983 */
984 disable_auth = no;
985
986 /* disable_remote_commands: disable users doing commands on remote servers */
987 disable_remote_commands = no;
988
989 /*
990 * tkline_expire_notices: enables or disables temporary kline/xline
991 * expire notices.
992 */
993 tkline_expire_notices = no;
994
995 /*
996 * default_floodcount: the default value of floodcount that is configurable
997 * via /quote set floodcount. This is the amount of lines a user
998 * may send to any other user/channel in one second.
999 */
1000 default_floodcount = 10;
1001
1002 /*
1003 * failed_oper_notice: send a notice to all opers on the server when
1004 * someone tries to OPER and uses the wrong password, host or ident.
1005 */
1006 failed_oper_notice = yes;
1007
1008 /*
1009 * dots_in_ident: the amount of '.' characters permitted in an ident
1010 * reply before the user is rejected.
1011 */
1012 dots_in_ident = 2;
1013
1014 /*
1015 * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1016 * placed via the server. klines hand placed are exempt from limits.
1017 * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1018 */
1019 min_nonwildcard = 3;
1020
1021 /*
1022 * min_nonwildcard_simple: the minimum non wildcard characters in
1023 * gecos bans. wildcard chars: '*' '?' '#'
1024 */
1025 min_nonwildcard_simple = 3;
1026
1027 /* max_accept: maximum allowed /accept's for +g usermode */
1028 max_accept = 20;
1029
1030 /* anti_nick_flood: enable the nickflood control code */
1031 anti_nick_flood = yes;
1032
1033 /* nick flood: the nick changes allowed in the specified period */
1034 max_nick_time = 20 seconds;
1035 max_nick_changes = 5;
1036
1037 /*
1038 * anti_spam_exit_message_time: the minimum time a user must be connected
1039 * before custom quit messages are allowed.
1040 */
1041 anti_spam_exit_message_time = 5 minutes;
1042
1043 /*
1044 * ts delta: the time delta allowed between server clocks before
1045 * a warning is given, or before the link is dropped. all servers
1046 * should run ntpdate/rdate to keep clocks in sync
1047 */
1048 ts_warn_delta = 30 seconds;
1049 ts_max_delta = 5 minutes;
1050
1051 /*
1052 * kline_with_reason: show the user the reason why they are k/d/glined
1053 * on exit. May give away who set k/dline when set via tcm.
1054 */
1055 kline_with_reason = yes;
1056
1057 /*
1058 * kline_reason: show this message to users on channel
1059 * instead of the oper reason.
1060 */
1061 kline_reason = "Connection closed";
1062
1063 /*
1064 * reject_hold_time: wait this amount of time before disconnecting
1065 * a rejected client. Use 0 to disable.
1066 */
1067 reject_hold_time = 30 seconds;
1068
1069 /*
1070 * warn_no_nline: warn opers about servers that try to connect but
1071 * we don't have a connect {} block for. Twits with misconfigured
1072 * servers can get really annoying with this enabled.
1073 */
1074 warn_no_nline = yes;
1075
1076 /*
1077 * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1078 * operators and administrators. Doing so is a good idea in case
1079 * there are any exempted (exempt{}) server IPs you don't want to
1080 * see leaked.
1081 */
1082 stats_e_disabled = no;
1083
1084 /* stats_o_oper only: make stats o (opers) oper only */
1085 stats_o_oper_only = yes;
1086
1087 /* stats_P_oper_only: make stats P (ports) oper only */
1088 stats_P_oper_only = yes;
1089
1090 /*
1091 * stats i oper only: make stats i (auth {}) oper only. set to:
1092 * yes: show users no auth blocks, made oper only.
1093 * masked: show users first matching auth block
1094 * no: show users all auth blocks.
1095 */
1096 stats_i_oper_only = yes;
1097
1098 /*
1099 * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1100 * yes: show users no auth blocks, made oper only
1101 * masked: show users first matching auth block
1102 * no: show users all auth blocks.
1103 */
1104 stats_k_oper_only = yes;
1105
1106 /*
1107 * caller_id_wait: time between notifying a +g user that somebody
1108 * is messaging them.
1109 */
1110 caller_id_wait = 1 minute;
1111
1112 /*
1113 * opers_bypass_callerid: allows operators to bypass +g and message
1114 * anyone who has it set (useful if you use services).
1115 */
1116 opers_bypass_callerid = no;
1117
1118 /*
1119 * pace_wait_simple: time between use of less intensive commands
1120 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1121 */
1122 pace_wait_simple = 1 second;
1123
1124 /*
1125 * pace_wait: time between more intensive commands
1126 * (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1127 */
1128 pace_wait = 10 seconds;
1129
1130 /*
1131 * short_motd: send clients a notice telling them to read the motd
1132 * instead of forcing a motd to clients who may simply ignore it.
1133 */
1134 short_motd = no;
1135
1136 /*
1137 * ping_cookie: require clients to respond exactly to a ping command,
1138 * can help block certain types of drones and FTP PASV mode spoofing.
1139 */
1140 ping_cookie = no;
1141
1142 /* no_oper_flood: increase flood limits for opers. */
1143 no_oper_flood = yes;
1144
1145 /*
1146 * true_no_oper_flood: completely eliminate flood limits for opers
1147 * and for clients with can_flood = yes in their auth {} blocks
1148 */
1149 true_no_oper_flood = yes;
1150
1151 /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1152 oper_pass_resv = yes;
1153
1154 /* REMOVE ME. The following line checks you've been reading. */
1155 havent_read_conf = 1;
1156
1157 /*
1158 * max_targets: the maximum amount of targets in a single
1159 * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1160 */
1161 max_targets = 4;
1162
1163 /*
1164 * client_flood: maximum amount of data in a clients queue before
1165 * they are dropped for flooding.
1166 */
1167 client_flood = 2560 bytes;
1168
1169 /*
1170 * message_locale: the default message locale
1171 * Use "standard" for the compiled in defaults.
1172 * To install the translated messages, go into messages/ in the
1173 * source directory and run `make install'.
1174 */
1175 message_locale = "standard";
1176
1177 /*
1178 * usermodes configurable: a list of usermodes for the options below
1179 *
1180 * +b - bots - See bot and drone flooding notices
1181 * +c - cconn - Client connection/quit notices
1182 * +C - cconn_full - Client connection/quit notices full
1183 * +D - deaf - Don't receive channel messages
1184 * +d - debug - See debugging notices
1185 * +f - full - See auth{} block full notices
1186 * +G - softcallerid - Server Side Ignore for users not on your channels
1187 * +g - callerid - Server Side Ignore (for privmsgs etc)
1188 * +H - hidden - Hides operator status to other users
1189 * +i - invisible - Not shown in NAMES or WHO unless you share a
1190 * a channel
1191 * +j - rej - See rejected client notices
1192 * +k - skill - See server generated KILL messages
1193 * +l - locops - See LOCOPS messages
1194 * +n - nchange - See client nick changes
1195 * +s - servnotice - See general server notices
1196 * +u - unauth - See unauthorized client notices
1197 * +w - wallop - See server generated WALLOPS
1198 * +x - external - See remote server connection and split notices
1199 * +y - spy - See LINKS, STATS, TRACE notices etc.
1200 * +z - operwall - See oper generated WALLOPS
1201 */
1202
1203 /* oper_only_umodes: usermodes only opers may set */
1204 oper_only_umodes = bots, cconn, cconn_full, debug, full, hidden, skill,
1205 nchange, rej, spy, external, operwall,
1206 locops, unauth;
1207
1208 /* oper_umodes: default usermodes opers get when they /oper */
1209 oper_umodes = bots, locops, servnotice, operwall, wallop;
1210
1211 /*
1212 * use_egd: if your system does not have *random devices yet you
1213 * want to use OpenSSL and encrypted links, enable this. Beware -
1214 * EGD is *very* CPU intensive when gathering data for its pool
1215 */
1216 # use_egd = yes;
1217
1218 /*
1219 * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1220 * which automatically finds the path.
1221 */
1222 # egdpool_path = "/var/run/egd-pool";
1223
1224 /*
1225 * throttle_time: the minimum amount of time between connections from
1226 * the same ip. exempt {} blocks are excluded from this throttling.
1227 * Offers protection against flooders who reconnect quickly.
1228 * Set to 0 to disable.
1229 */
1230 throttle_time = 0;
1231 };
1232
1233 glines {
1234 /*
1235 * EFnet Note: This feature is required for European EFnet servers
1236 * and is used by several North American servers. As
1237 * such, it has been left on by default. If you
1238 * do not want your server to participate in G:Lines
1239 * you should disable this.
1240 */
1241
1242 /* enable: enable glines, network wide temp klines */
1243 enable = yes;
1244
1245 /*
1246 * duration: the amount of time a gline will remain on your
1247 * server before expiring
1248 */
1249 duration = 1 day;
1250
1251 /*
1252 * log: which types of rules you want to log when triggered
1253 * (choose reject or block)
1254 */
1255 log = reject, block;
1256
1257 /*
1258 * NOTE: gline ACLs can cause a desync of glines throughout the
1259 * network, meaning some servers may have a gline triggered, and
1260 * others may not. Also, you only need insert rules for glines
1261 * that you want to block and/or reject. If you want to accept and
1262 * propagate the gline, do NOT put a rule for it.
1263 */
1264
1265 /* user@host for rule to apply to */
1266 user = "god@I.still.hate.packets";
1267 /* server for rule to apply to */
1268 name = "hades.arpa";
1269
1270 /*
1271 * action: action to take when a matching gline is found. options are:
1272 * reject - do not apply the gline locally
1273 * block - do not propagate the gline
1274 */
1275 action = reject, block;
1276
1277 user = "god@*";
1278 name = "*";
1279 action = block;
1280 };
1281
1282 modules {
1283 /*
1284 * path: other paths to search for modules specified below
1285 * and in "/module load".
1286 */
1287 path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1288 path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1289
1290 /* module: the name of a module to load on startup/rehash */
1291 #module = "some_module.la";
1292 };
1293
1294 /*
1295 * log {}: contains information about logfiles.
1296 */
1297 log {
1298 /* Do you want to enable logging to ircd.log? */
1299 use_logging = yes;
1300
1301 file {
1302 type = oper;
1303 name = "/home/ircd/var/log/oper.log";
1304 size = unlimited;
1305 };
1306
1307 file {
1308 type = user;
1309 name = "/home/ircd/var/log/user.log";
1310 size = 50 megabytes;
1311 };
1312
1313 file {
1314 type = kill;
1315 name = "/home/ircd/var/log/kill.log";
1316 size = 50 megabytes;
1317 };
1318
1319 file {
1320 type = kline;
1321 name = "/home/ircd/var/log/kline.log";
1322 size = 50 megabytes;
1323 };
1324
1325 file {
1326 type = dline;
1327 name = "/home/ircd/var/log/dline.log";
1328 size = 50 megabytes;
1329 };
1330
1331 file {
1332 type = gline;
1333 name = "/home/ircd/var/log/gline.log";
1334 size = 50 megabytes;
1335 };
1336
1337 file {
1338 type = debug;
1339 name = "/home/ircd/var/log/debug.log";
1340 size = 50 megabytes;
1341 };
1342 };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28