/[svn]/ircd-hybrid-8/doc/example.efnet.conf
ViewVC logotype

Contents of /ircd-hybrid-8/doc/example.efnet.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1324 - (show annotations)
Fri Mar 30 21:40:38 2012 UTC (7 years, 9 months ago) by michael
File size: 36959 byte(s)
- Remove log::timestamp configuration directive. Timestamps are now enabled by default.
- Timestamps are iso8601 now

1 /* doc/example.efnet.conf - ircd-hybrid-7 EFnet Example configuration file
2 * Copyright (C) 2000-2011 Hybrid Development Team
3 *
4 * Written by ejb, wcampbel, db, leeh and others
5 * Other example configurations can be found in the source dir under
6 * etc/.
7 *
8 * $Id$
9 */
10
11 /* IMPORTANT NOTES:
12 *
13 * auth {} blocks MUST be specified in order of precedence. The first one
14 * that matches a user will be used. So place spoofs first, then specials,
15 * then general access.
16 *
17 * Shell style (#), C++ style (//) and C style comments are supported.
18 *
19 * Files may be included by either:
20 * .include "filename"
21 * .include <filename>
22 *
23 * Times/durations are written as:
24 * 12 hours 30 minutes 1 second
25 *
26 * Valid units of time:
27 * month, week, day, hour, minute, second
28 *
29 * Valid units of size:
30 * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31 *
32 * Sizes and times may be singular or plural.
33 */
34
35 /* EFNET NOTE:
36 *
37 * This configuration file is a BASIC configuration file for use
38 * on EFnet. You MUST still take the time to set this file up
39 * properly.
40 *
41 * DISCLAIMER: This file was submitted by Disciple@EFnet and has
42 * since been modified by the Hybrid team.
43 */
44
45 /*
46 * serverinfo {}: contains information about the server
47 */
48 serverinfo {
49 /*
50 * name: the name of this server. This cannot be changed at runtime.
51 */
52 name = "efnet.irc";
53
54 /*
55 * sid: a server's unique ID. This is three characters long and must
56 * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
57 * a digit, followed by 2 alpha-numerical letters.
58 * NOTE: The letters must be capitalized. This cannot be changed at runtime.
59 */
60 sid = "_CHANGE_ME_";
61
62 /*
63 * description: the description of the server. '[' and ']' may not
64 * be used here for compatibility with older servers.
65 */
66 description = "hybrid-7 test server";
67
68 /*
69 * network info: the name and description of the network this server
70 * is on. Shown in the 005 reply and used with serverhiding.
71 */
72 network_name = "EFnet";
73 network_desc = "Eris Free Network";
74
75 /*
76 * hub: allow this server to act as a hub and have multiple servers
77 * connected to it.
78 */
79 hub = no;
80
81 /*
82 * vhost: the IP to bind to when we connect outward to ipv4 servers.
83 * This should be an ipv4 IP only, or "*" for INADDR_ANY.
84 */
85 #vhost = "192.169.0.1";
86
87 /*
88 * vhost6: the IP to bind to when we connect outward to ipv6 servers.
89 * This should be an ipv6 IP only, or "*" for INADDR_ANY.
90 */
91 #vhost6 = "3ffe:80e8:546::2";
92
93 /* max_clients: the maximum number of clients allowed to connect */
94 max_clients = 512;
95
96 /*
97 * rsa_private_key_file: the path to the file containing our
98 * rsa key for cryptlink.
99 *
100 * Example command to store a 2048 bit RSA keypair in
101 * rsa.key, and the public key in rsa.pub:
102 *
103 * openssl genrsa -out rsa.key 2048
104 * openssl rsa -in rsa.key -pubout -out rsa.pub
105 * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
106 * chmod 0600 rsa.key
107 * chmod 0644 rsa.pub
108 */
109 #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
110
111 /*
112 * ssl_certificate_file: the path to the file containing our
113 * ssl certificate for encrypted client connection.
114 *
115 * This assumes your private RSA key is stored in rsa.key. You
116 * MUST have an RSA key in order to generate the certificate
117 *
118 * openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
119 *
120 * See http://www.openssl.org/docs/HOWTO/certificates.txt
121 *
122 * Please use the following values when generating the cert
123 *
124 * Organization Name: Network Name
125 * Organization Unit Name: changme.someirc.net
126 * Common Name: irc.someirc.net
127 * E-mail: you@domain.com
128 */
129 #ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
130
131 #ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
132
133 /*
134 * ssl_cipher_list:
135 *
136 * List of ciphers that are supported by _this_ server. Can be used to enforce
137 * specific ciphers for incoming SSL/TLS connections.
138 * If a client (which also includes incoming server connections) isn't capable
139 * of any cipher listed below, the connection will be simply rejected.
140 *
141 * A list of supported ciphers can be obtained by running:
142 *
143 * openssl ciphers -ssl3 -tls1 -v
144 *
145 * Multiple ciphers are separated by colons. The order of preference is from
146 * left to right.
147 */
148 #ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
149
150 /*
151 * ssl_server_protocol:
152 * SSL/TLS protocols we provide for incoming secure connections.
153 * This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
154 * SSLv2 is not suppported.
155 */
156 #ssl_server_method = tlsv1, sslv3;
157 #ssl_client_method = tlsv1;
158 };
159
160 /*
161 * admin {}: contains admin information about the server
162 */
163 admin {
164 name = "EFnet Admin";
165 description = "Main Server Administrator";
166 email = "<irc-admin@efnet.irc>";
167 };
168
169 /*
170 * class {}: contains information about classes for users
171 */
172 class {
173 /* name: the name of the class. classes are text now */
174 name = "users";
175
176 /*
177 * ping_time: how often a client must reply to a PING from the
178 * server before they are dropped.
179 */
180 ping_time = 90 seconds;
181
182 /*
183 * number_per_ip: how many local users are allowed to connect
184 * from one IP (optional)
185 */
186 number_per_ip = 2;
187
188 /*
189 * max_local: how many local users are allowed to connect
190 * from one ident@host (optional)
191 */
192 max_local = 2;
193
194 /*
195 * max_global: network-wide limit of users per ident@host (optional)
196 */
197 max_global = 10;
198
199 /*
200 * max_number: the maximum number of users allowed in this class (optional)
201 */
202 max_number = 100;
203
204 /*
205 * the following lines are optional and allow you to define
206 * how many users can connect from one /NN subnet
207 */
208 cidr_bitlen_ipv4 = 24;
209 cidr_bitlen_ipv6 = 120;
210 number_per_cidr = 16;
211
212 /*
213 * sendq: the amount of data allowed in a clients queue before
214 * they are dropped.
215 */
216 sendq = 100 kbytes;
217 };
218
219 class {
220 name = "opers";
221
222 /*
223 * contrary to seeming popular belief, setting ping time
224 * higher for an oper is NOT doing them a favor.
225 * Since if a link is dead its dead and it means
226 * you have to use another nick long enough to kill the old one :-)
227 * Its much better to use a fairly standard 90 second ping time
228 */
229 ping_time = 90 seconds;
230 number_per_ip = 10;
231 max_number = 100;
232 sendq = 1 mbyte;
233 };
234
235 class {
236 name = "server";
237
238 /*
239 * Same thing here. It's a fallacy to think increasing
240 * ping time for servers is a "good idea." All it leads to
241 * is "ghosting" on one end. Not a good idea.
242 */
243 ping_time = 90 seconds;
244
245 /*
246 * ping_warning: how fast a server must reply to a PING before
247 * a warning to opers is generated.
248 */
249 ping_warning = 15 seconds;
250
251 /*
252 * connectfreq: only used in server classes. Specifies the delay
253 * between autoconnecting to servers.
254 *
255 * Both comstud and I recommend 10 minutes a few years ago.
256 * 15 minutes might be right now. The reason you don't want it too
257 * low is, you make the servers reconnect too quickly with
258 * a large sendq, and they _will_ nick collide. badly. 5 minutes
259 * IS way too short.
260 */
261 connectfreq = 15 minutes;
262
263 /* max number: the amount of servers to autoconnect to */
264 max_number = 1;
265
266 /* sendq: servers need a higher sendq as they send more data */
267 sendq = 15 megabytes;
268 };
269
270 /*
271 * listen {}: contains information about the ports ircd listens on
272 */
273 listen {
274 /*
275 * port: the specific port to listen on. If no host is specified
276 * before, it will listen on all available IPs.
277 *
278 * Ports are separated via a comma, a range may be specified using ".."
279 */
280
281 /* port: listen on all available IPs, ports 6665 to 6669 */
282 port = 6665 .. 6669;
283
284 /*
285 * Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
286 * unless you are an administrator.
287 *
288 * NOTE: The "flags" directive has to come before "port". Always!
289 *
290 * Currently available flags are:
291 *
292 * ssl - Port is for SSL client connections only
293 * server - Only server connections are permitted
294 * hidden - Port is hidden from /stats P, unless you're an admin
295 */
296 flags = hidden, ssl;
297 host = "192.168.0.1";
298 port = 6697;
299
300 /*
301 * host: set a specific IP/host the ports after the line will listen
302 * on. This may be ipv4 or ipv6.
303 */
304 host = "1.2.3.4";
305 port = 7000, 7001;
306
307 host = "3ffe:1234:a:b:c::d";
308 port = 7002;
309 };
310
311 /*
312 * auth {}: allow users to connect to the ircd
313 */
314 auth {
315 /*
316 * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
317 * lines are permitted per auth block.
318 */
319 user = "*@172.16.0.0/12";
320 user = "*test@123D:B567:*";
321
322 /* password: an optional password that is required to use this block */
323 password = "letmein";
324
325 /*
326 * encrypted: controls whether the auth password above has been
327 * encrypted.
328 */
329 encrypted = yes;
330
331 /*
332 * spoof: fake the users host to this. This is free-form,
333 * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
334 */
335 spoof = "I.still.hate.packets";
336
337 /* class: the class the user is placed in */
338 class = "opers";
339
340 /*
341 * need_password - don't allow users who haven't supplied the correct
342 * password to connect using another auth{} block
343 * ('&' prefix on /stats I if disabled)
344 * need_ident - require the user to have identd to connect ('+' prefix on /stats I)
345 * spoof_notice - enable spoofing notification to admins
346 * exceed_limit - allow a user to exceed class limits ('>' prefix on /stats I)
347 * kline_exempt - exempt this user from k/glines ('^' prefix on /stats I)
348 * gline_exempt - exempt this user from glines ('_' prefix on /stats I)
349 * resv_exempt - exempt this user from resvs ('$' prefix on /stats I)
350 * no_tilde - remove ~ from a user with no ident ('-' prefix on /stats I)
351 * can_flood - allow this user to exceed flood limits ('|' prefix on /stats I)
352 */
353 flags = need_password, spoof_notice, exceed_limit, kline_exempt,
354 gline_exempt, resv_exempt, no_tilde, can_flood;
355 };
356
357 auth {
358 /*
359 * redirect: the server and port to redirect a user to. A user does
360 * not have to obey the redirection, the ircd just suggests an alternative
361 * server for them.
362 */
363 redirserv = "this.is.not.a.real.server";
364 redirport = 6667;
365
366 user = "*.server";
367
368 /* class: a class is required even though it is not used */
369 class = "users";
370 };
371
372 auth {
373 user = "*@*";
374 class = "users";
375 flags = need_ident;
376 };
377
378 /*
379 * operator {}: defines ircd operators
380 *
381 * ircd-hybrid no longer supports local operators, privileges are
382 * controlled via flags.
383 */
384 operator {
385 /* name: the name of the oper */
386 name = "god";
387
388 /*
389 * user: the user@host required for this operator. Multiple
390 * user="" lines are supported.
391 */
392 user = "*god@192.168.0.0/16";
393 user = "*@127.0.0.0/8";
394
395 /*
396 * password: the password required to oper. By default this will
397 * need to be encrypted by using the provided mkpasswd tool.
398 * Several password hash algorithms are available depending
399 * on your system's crypt() implementation. For example, a modern
400 * glibc already has support for SHA-256/512, and MD5 encryption
401 * algorithms.
402 */
403 password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
404
405 /*
406 * encrypted: controls whether the oper password above has been
407 * encrypted.
408 */
409 encrypted = yes;
410
411 /*
412 * rsa_public_key_file: the public key for this oper when using Challenge.
413 * A password should not be defined when this is used, see
414 * doc/challenge.txt for more information.
415 */
416 # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
417
418 /* class: the class the oper joins when they successfully /oper */
419 class = "opers";
420
421 /*
422 * umodes: default usermodes opers get when they /oper. If defined,
423 * it will override oper_umodes settings in general {}.
424 * Available usermodes:
425 *
426 * +b - bots - See bot and drone flooding notices
427 * +c - cconn - Client connection/quit notices
428 * +C - cconn_full - Client connection/quit notices full
429 * +D - deaf - Don't receive channel messages
430 * +d - debug - See debugging notices
431 * +f - full - See I: line full notices
432 * +G - softcallerid - Server Side Ignore for users not on your channels
433 * +g - callerid - Server Side Ignore (for privmsgs etc)
434 * +H - hidden - Hides operator status to other users
435 * +i - invisible - Not shown in NAMES or WHO unless you share a
436 * a channel
437 * +j - rej - See rejected client notices
438 * +k - skill - See server generated KILL messages
439 * +l - locops - See LOCOPS messages
440 * +n - nchange - See client nick changes
441 * +s - servnotice - See general server notices
442 * +u - unauth - See unauthorized client notices
443 * +w - wallop - See server generated WALLOPS
444 * +x - external - See remote server connection and split notices
445 * +y - spy - See LINKS, STATS, TRACE notices etc.
446 * +z - operwall - See oper generated WALLOPS
447 */
448 # umodes = locops, servnotice, operwall, wallop;
449
450 /*
451 * privileges: controls the activities and commands an oper is
452 * allowed to do on the server. All options default to no.
453 * Available options:
454 *
455 * module - allows MODLIST, MODRESTART, MODLOAD, MODUNLOAD
456 * global_kill - allows remote users to be /KILL'd
457 * remote - allows remote SQUIT and CONNECT
458 * remoteban - allows remote KLINE/UNKLINE
459 * dline - allows DLINE
460 * undline - allows UNDLINE
461 * kline - allows KILL, and KLINE
462 * unkline - allows UNKLINE
463 * gline - allows GLINE
464 * xline - allows XLINE
465 * globops - allows GLOBOPS
466 * operwall - allows OPERWALL
467 * nick_changes - allows oper to see nickchanges via usermode +n
468 * rehash - allows oper to REHASH config
469 * die - allows DIE
470 * restart - allows RESTART
471 * admin - gives admin privileges. admins for example,
472 * may see the real IP addresses of servers.
473 */
474 flags = global_kill, remote, kline, unkline, xline, globops, restart,
475 die, rehash, nick_changes, admin, operwall, module;
476 };
477
478 /*
479 * connect {}: controls servers we connect to
480 */
481 connect {
482 /* name: the name of the server */
483 name = "irc.uplink.com";
484
485 /*
486 * host: the host or IP to connect to. If a hostname is used it
487 * must match the reverse dns of the server.
488 */
489 host = "192.168.0.1";
490
491 /*
492 * vhost: the IP to bind to when we connect outward to servers.
493 * serverinfo::vhost and serverinfo::vhost6 will be overridden
494 * by this directive.
495 */
496 vhost = "192.168.0.2";
497
498 /*
499 * passwords: the passwords we send (OLD C:) and accept (OLD N:).
500 * The remote server will have these passwords reversed.
501 */
502 send_password = "password";
503 accept_password = "anotherpassword";
504
505 /*
506 * encrypted: controls whether the accept_password above has been
507 * encrypted.
508 */
509 encrypted = no;
510
511 /* port: the port to connect to this server on */
512 port = 6666;
513
514 /*
515 * hub_mask: the mask of servers that this server may hub. Multiple
516 * entries are permitted
517 */
518 hub_mask = "*";
519
520 /*
521 * leaf_mask: the mask of servers this server may not hub. Multiple
522 * entries are permitted. Useful for forbidding EU -> US -> EU routes.
523 */
524 # leaf_mask = "*.uk";
525
526 /* class: the class this server is in */
527 class = "server";
528
529 #ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
530
531 /*
532 * autoconn - controls whether we autoconnect to this server or not,
533 * dependent on class limits. By default, this is disabled.
534 * burst_away - This will send the /away string that users have set
535 * on the server burst. Note this can be a lot of data
536 * and slow down your server burst.
537 * topicburst - Send topics to this server during channel burst. Works
538 * only if the server we are connecting to is capable
539 * of TBURST/TB.
540 * ssl - Initiates a TLS/SSL connection.
541 */
542 # flags = autoconn, burst_away, topicburst;
543 };
544
545 connect {
546 name = "ipv6.some.server";
547 host = "3ffd:dead:beef::1";
548 send_password = "password";
549 accept_password = "password";
550 port = 6666;
551
552 /*
553 * aftype: controls whether the connection uses "ipv4" or "ipv6".
554 * Default is ipv4.
555 */
556 aftype = ipv6;
557 class = "server";
558 };
559
560 /*
561 * cluster {}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
562 * automatically
563 */
564 cluster {
565 /*
566 * name: the server to share with, this can take wildcards
567 *
568 * NOTE: only local actions will be clustered, meaning if
569 * the server receives a shared kline/unkline/etc, it
570 * will not be propagated to clustered servers.
571 *
572 * Remote servers are not necessarily required to accept
573 * clustered lines, they need a shared{} for *THIS* server
574 * in order to accept them.
575 */
576 name = "*.arpa";
577
578 /*
579 * type: list of what to share, options are as follows:
580 * dline - share dlines
581 * undline - share undlines
582 * kline - share klines
583 * unkline - share unklines
584 * xline - share xlines
585 * unxline - share unxlines
586 * resv - share resvs
587 * unresv - share unresvs
588 * locops - share locops
589 * all - share all of the above (default)
590 */
591 type = kline, unkline, locops, xline, resv;
592 };
593
594 /*
595 * shared {}: users that are allowed to remote kline
596 *
597 * NOTE: This can be effectively used for remote klines.
598 * Please note that there is no password authentication
599 * for users setting remote klines. You must also be
600 * /oper'd in order to issue a remote kline.
601 */
602 shared {
603 /*
604 * name: the server the user must be on to set klines. If this is not
605 * specified, the user will be allowed to kline from all servers.
606 */
607 name = "irc2.some.server";
608
609 /*
610 * user: the user@host mask that is allowed to set klines. If this is
611 * not specified, all users on the server above will be allowed to set
612 * a remote kline.
613 */
614 user = "oper@my.host.is.spoofed";
615
616 /*
617 * type: list of what to share, options are as follows:
618 * dline - allow oper/server to dline
619 * undline - allow oper/server to undline
620 * kline - allow oper/server to kline
621 * unkline - allow oper/server to unkline
622 * xline - allow oper/server to xline
623 * unxline - allow oper/server to unxline
624 * resv - allow oper/server to resv
625 * unresv - allow oper/server to unresv
626 * locops - allow oper/server to locops - only used for servers that cluster
627 * all - allow oper/server to do all of the above (default)
628 */
629 type = kline, unkline, resv;
630 };
631
632 /*
633 * kill {}: users that are not allowed to connect
634 * Oper issued klines will be added to the specified kline config
635 */
636 kill {
637 user = "bad@*.hacked.edu";
638 reason = "Obviously hacked account";
639 };
640
641 kill {
642 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
643
644 /*
645 * NOTE: You have to set type=regex; when using a regular expression
646 * based user entry
647 */
648 type = regex;
649 };
650
651 /*
652 * deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
653 * Oper issued dlines will be added to the specified dline config
654 */
655 deny {
656 ip = "10.0.1.0/24";
657 reason = "Reconnecting vhosted bots";
658 };
659
660 /*
661 * exempt {}: IPs that are exempt from deny {} and Dlines.
662 *
663 * EFnet Note: We really suggest to enable general::stats_e_disabled
664 * if you plan to exempt EFnet server IPs you don't want to show to
665 * other operators and/or administrators through "STATS e".
666 */
667 exempt {
668 ip = "192.168.0.0/16";
669 };
670
671 /*
672 * resv {}: nicks and channels users may not use/join
673 */
674 resv {
675 /* reason: the reason for the proceeding resv's */
676 reason = "There are no services on this network";
677
678 /* resv: the nicks and channels users may not join/use */
679 nick = "nickserv";
680 nick = "chanserv";
681 nick = "operserv";
682 nick = "JUPES";
683 nick = "JUPE";
684 nick = "CH?NF?X"; # CHANFIX (services.int)
685
686 /* These are totally optional, but may be a good idea */
687 nick = "oper";
688 nick = "ircop";
689 nick = "op";
690 nick = "ident";
691 nick = "pass";
692 channel = "#jupedchan";
693
694 /* resv: wildcard masks are also supported in nicks only */
695 reason = "Clone bots";
696 nick = "clone*";
697 };
698
699 /*
700 * gecos {}: The X: replacement, used for banning users based on
701 * their "realname".
702 */
703 gecos {
704 name = "*sex*";
705 reason = "Possible spambot";
706 };
707
708 gecos {
709 name = "sub7server";
710 reason = "Trojan drone";
711 };
712
713 gecos {
714 name = "*http*";
715 reason = "Spambot";
716 };
717
718 gecos {
719 name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
720
721 /*
722 * NOTE: You have to set type=regex; when using a regular expression
723 * based name entry
724 */
725 type = regex;
726 };
727
728 /*
729 * channel {}: The channel block contains options pertaining to channels
730 */
731 channel {
732 /*
733 * disable_fake_channels: this option, if set to 'yes', will
734 * disallow clients to create or join channels that have one
735 * of the following ASCII characters in their name:
736 *
737 * 2 | bold
738 * 3 | mirc color
739 * 15 | plain text
740 * 22 | reverse
741 * 31 | underline
742 * 160 | non-breaking space
743 */
744 disable_fake_channels = yes;
745
746 /*
747 * restrict_channels: reverse channel RESVs logic, only reserved
748 * channels are allowed
749 */
750 restrict_channels = no;
751
752 /*
753 * disable_local_channels: prevent users from joining &channels.
754 */
755 disable_local_channels = no;
756
757 /*
758 * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
759 * that can join a +i channel without an invite.
760 */
761 use_invex = yes;
762
763 /*
764 * use_except: Enable/disable channel mode +e, a n!u@h list of masks
765 * that can join a channel through a ban (+b).
766 */
767 use_except = yes;
768
769 /*
770 * use_knock: Allows users to request an invite to a channel that
771 * is locked somehow (+ikl). If the channel is +p or you are banned
772 * the knock will not be sent.
773 *
774 * EFnet Note: This seems to be used mostly by European servers
775 * and not North American ones.
776 * Please feel free to disable this if you do not
777 * want to run channel knock.
778 * channel knock allows an user to "/quote knock #channel"
779 * to ask for an invite. It is typically used in eu-efnet
780 * to ask for an invite to #eu-opers.
781 * A user who is banned will not have their knock
782 * sent to channel. It is paced, so knock will not
783 * cause a flood.
784 */
785 use_knock = yes;
786
787 /*
788 * knock_delay: The amount of time a user must wait between issuing
789 * the knock command.
790 */
791 knock_delay = 5 minutes;
792
793 /*
794 * knock_delay_channel: How often a knock to any specific channel
795 * is permitted, regardless of the user sending the knock.
796 */
797 knock_delay_channel = 1 minute;
798
799 /*
800 * burst_topicwho: enable sending of who set topic on topicburst
801 * default is yes
802 */
803 burst_topicwho = yes;
804
805 /*
806 * max_chans_per_user: The maximum number of channels a user can
807 * join/be on.
808 */
809 max_chans_per_user = 25;
810
811 /* quiet_on_ban: stop banned people talking in channels. */
812 quiet_on_ban = yes;
813
814 /* max_bans: maximum number of +b/e/I modes in a channel */
815 max_bans = 100;
816
817 /*
818 * how many joins in how many seconds constitute a flood, use 0 to
819 * disable. +b opers will be notified (changeable via /set)
820 */
821 join_flood_count = 16;
822 join_flood_time = 8 seconds;
823
824 /*
825 * splitcode: The ircd will now check splitmode every few seconds.
826 *
827 * Either split users or split servers can activate splitmode, but
828 * both conditions must be met for the ircd to deactivate splitmode.
829 *
830 * You may force splitmode to be permanent by /quote set splitmode on
831 */
832
833 /*
834 * default_split_user_count: when the usercount is lower than this level,
835 * consider ourselves split. This must be set for automatic splitmode.
836 */
837 default_split_user_count = 20000;
838
839 /*
840 * default_split_server_count: when the servercount is lower than this,
841 * consider ourselves split. This must be set for automatic splitmode.
842 */
843 default_split_server_count = 10;
844
845 /* no_create_on_split: disallow users creating channels on split. */
846 no_create_on_split = yes;
847
848 /* no_join_on_split: disallow users joining channels at all on a split. */
849 no_join_on_split = no;
850 };
851
852 /*
853 * serverhide {}: The serverhide block contains the options regarding
854 * serverhiding
855 */
856 serverhide {
857 /*
858 * flatten_links: this option will show all servers in /links appear
859 * that they are linked to this current server
860 *
861 * EFnet Note: While this is not a requirement on EFnet, it
862 * may be a good idea. Except, it's useless
863 * unless the entire net runs it.
864 */
865 flatten_links = no;
866
867 /*
868 * links_delay: how often to update the links file when it is
869 * flattened.
870 */
871 links_delay = 5 minutes;
872
873 /*
874 * hidden: hide this server from a /links output on servers that
875 * support it. This allows hub servers to be hidden etc.
876 */
877 hidden = no;
878
879 /*
880 * disable_hidden: prevent servers hiding themselves from a
881 * /links output.
882 */
883 disable_hidden = no;
884
885 /*
886 * hide_servers: hide remote servernames everywhere and instead use
887 * hidden_name and network_desc.
888 */
889 hide_servers = no;
890
891 /*
892 * Use this as the servername users see if hide_servers = yes.
893 */
894 hidden_name = "*.hidden.com";
895
896 /*
897 * hide_server_ips: If this is disabled, opers will be unable to see
898 * servers ips and will be shown a masked ip, admins will be shown the
899 * real ip.
900 *
901 * If this is enabled, nobody can see a servers ip. *This is a kludge*,
902 * it has the side effect of hiding the ips everywhere, including
903 * logfiles.
904 *
905 * We recommend you leave this disabled, and just take care with who you
906 * give admin=yes; to.
907 */
908 hide_server_ips = yes;
909 };
910
911 /*
912 * general {}: The general block contains many of the options that were once
913 * compiled in options in config.h. The general block is read at start time.
914 */
915 general {
916 /* max_watch: maximum WATCH entries a client can have. */
917 max_watch = 60;
918
919 /*
920 * gline_min_cidr: the minimum required length of a CIDR bitmask
921 * for IPv4 based glines
922 */
923 gline_min_cidr = 16;
924
925 /*
926 * gline_min_cidr6: the minimum required length of a CIDR bitmask
927 * for IPv6 based glines
928 */
929 gline_min_cidr6 = 48;
930
931 /*
932 * Whether to automatically set mode +i on connecting users.
933 */
934 invisible_on_connect = yes;
935
936 /*
937 * Show "actually using host <ip>" on /whois when possible.
938 */
939 use_whois_actually = yes;
940
941 /*
942 * Max time from the nickname change that still causes KILL
943 * automatically to switch for the current nick of that user.
944 */
945 kill_chase_time_limit = 90 seconds;
946
947 /*
948 * If hide_spoof_ips is disabled, opers will be allowed to see the real
949 * IP of spoofed users in /trace etc. If this is defined they will be
950 * shown a masked IP.
951 */
952 hide_spoof_ips = yes;
953
954 /*
955 * Ignore bogus timestamps from other servers. Yes, this will desync
956 * the network, but it will allow chanops to resync with a valid non TS 0
957 *
958 * This should be enabled network wide, or not at all.
959 */
960 ignore_bogus_ts = no;
961
962 /*
963 * disable_auth: completely disable ident lookups; if you enable this,
964 * be careful of what you set need_ident to in your auth {} blocks
965 */
966 disable_auth = no;
967
968 /* disable_remote_commands: disable users doing commands on remote servers */
969 disable_remote_commands = no;
970
971 /*
972 * tkline_expire_notices: enables or disables temporary kline/xline
973 * expire notices.
974 */
975 tkline_expire_notices = no;
976
977 /*
978 * default_floodcount: the default value of floodcount that is configurable
979 * via /quote set floodcount. This is the amount of lines a user
980 * may send to any other user/channel in one second.
981 */
982 default_floodcount = 10;
983
984 /*
985 * failed_oper_notice: send a notice to all opers on the server when
986 * someone tries to OPER and uses the wrong password, host or ident.
987 */
988 failed_oper_notice = yes;
989
990 /*
991 * dots_in_ident: the amount of '.' characters permitted in an ident
992 * reply before the user is rejected.
993 */
994 dots_in_ident = 2;
995
996 /*
997 * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
998 * placed via the server. klines hand placed are exempt from limits.
999 * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1000 */
1001 min_nonwildcard = 3;
1002
1003 /*
1004 * min_nonwildcard_simple: the minimum non wildcard characters in
1005 * gecos bans. wildcard chars: '*' '?' '#'
1006 */
1007 min_nonwildcard_simple = 3;
1008
1009 /* max_accept: maximum allowed /accept's for +g usermode */
1010 max_accept = 20;
1011
1012 /* anti_nick_flood: enable the nickflood control code */
1013 anti_nick_flood = yes;
1014
1015 /* nick flood: the nick changes allowed in the specified period */
1016 max_nick_time = 20 seconds;
1017 max_nick_changes = 5;
1018
1019 /*
1020 * anti_spam_exit_message_time: the minimum time a user must be connected
1021 * before custom quit messages are allowed.
1022 */
1023 anti_spam_exit_message_time = 5 minutes;
1024
1025 /*
1026 * ts delta: the time delta allowed between server clocks before
1027 * a warning is given, or before the link is dropped. all servers
1028 * should run ntpdate/rdate to keep clocks in sync
1029 */
1030 ts_warn_delta = 30 seconds;
1031 ts_max_delta = 5 minutes;
1032
1033 /*
1034 * kline_with_reason: show the user the reason why they are k/d/glined
1035 * on exit. May give away who set k/dline when set via tcm.
1036 */
1037 kline_with_reason = yes;
1038
1039 /*
1040 * kline_reason: show this message to users on channel
1041 * instead of the oper reason.
1042 */
1043 kline_reason = "Connection closed";
1044
1045 /*
1046 * reject_hold_time: wait this amount of time before disconnecting
1047 * a rejected client. Use 0 to disable.
1048 */
1049 reject_hold_time = 30 seconds;
1050
1051 /*
1052 * warn_no_nline: warn opers about servers that try to connect but
1053 * we don't have a connect {} block for. Twits with misconfigured
1054 * servers can get really annoying with this enabled.
1055 */
1056 warn_no_nline = yes;
1057
1058 /*
1059 * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1060 * operators and administrators. Doing so is a good idea in case
1061 * there are any exempted (exempt{}) server IPs you don't want to
1062 * see leaked.
1063 */
1064 stats_e_disabled = no;
1065
1066 /* stats_o_oper only: make stats o (opers) oper only */
1067 stats_o_oper_only = yes;
1068
1069 /* stats_P_oper_only: make stats P (ports) oper only */
1070 stats_P_oper_only = yes;
1071
1072 /*
1073 * stats i oper only: make stats i (auth {}) oper only. set to:
1074 * yes: show users no auth blocks, made oper only.
1075 * masked: show users first matching auth block
1076 * no: show users all auth blocks.
1077 */
1078 stats_i_oper_only = yes;
1079
1080 /*
1081 * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1082 * yes: show users no auth blocks, made oper only
1083 * masked: show users first matching auth block
1084 * no: show users all auth blocks.
1085 */
1086 stats_k_oper_only = yes;
1087
1088 /*
1089 * caller_id_wait: time between notifying a +g user that somebody
1090 * is messaging them.
1091 */
1092 caller_id_wait = 1 minute;
1093
1094 /*
1095 * opers_bypass_callerid: allows operators to bypass +g and message
1096 * anyone who has it set (useful if you use services).
1097 */
1098 opers_bypass_callerid = no;
1099
1100 /*
1101 * pace_wait_simple: time between use of less intensive commands
1102 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1103 */
1104 pace_wait_simple = 1 second;
1105
1106 /*
1107 * pace_wait: time between more intensive commands
1108 * (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1109 */
1110 pace_wait = 10 seconds;
1111
1112 /*
1113 * short_motd: send clients a notice telling them to read the motd
1114 * instead of forcing a motd to clients who may simply ignore it.
1115 */
1116 short_motd = no;
1117
1118 /*
1119 * ping_cookie: require clients to respond exactly to a ping command,
1120 * can help block certain types of drones and FTP PASV mode spoofing.
1121 */
1122 ping_cookie = no;
1123
1124 /* no_oper_flood: increase flood limits for opers. */
1125 no_oper_flood = yes;
1126
1127 /*
1128 * true_no_oper_flood: completely eliminate flood limits for opers
1129 * and for clients with can_flood = yes in their auth {} blocks
1130 */
1131 true_no_oper_flood = yes;
1132
1133 /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1134 oper_pass_resv = yes;
1135
1136 /* REMOVE ME. The following line checks you've been reading. */
1137 havent_read_conf = 1;
1138
1139 /*
1140 * max_targets: the maximum amount of targets in a single
1141 * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1142 */
1143 max_targets = 4;
1144
1145 /*
1146 * client_flood: maximum amount of data in a clients queue before
1147 * they are dropped for flooding.
1148 */
1149 client_flood = 2560 bytes;
1150
1151 /*
1152 * message_locale: the default message locale
1153 * Use "standard" for the compiled in defaults.
1154 * To install the translated messages, go into messages/ in the
1155 * source directory and run `make install'.
1156 */
1157 message_locale = "standard";
1158
1159 /*
1160 * usermodes configurable: a list of usermodes for the options below
1161 *
1162 * +b - bots - See bot and drone flooding notices
1163 * +c - cconn - Client connection/quit notices
1164 * +C - cconn_full - Client connection/quit notices full
1165 * +D - deaf - Don't receive channel messages
1166 * +d - debug - See debugging notices
1167 * +f - full - See I: line full notices
1168 * +G - softcallerid - Server Side Ignore for users not on your channels
1169 * +g - callerid - Server Side Ignore (for privmsgs etc)
1170 * +H - hidden - Hides operator status to other users
1171 * +i - invisible - Not shown in NAMES or WHO unless you share a
1172 * a channel
1173 * +j - rej - See rejected client notices
1174 * +k - skill - See server generated KILL messages
1175 * +l - locops - See LOCOPS messages
1176 * +n - nchange - See client nick changes
1177 * +s - servnotice - See general server notices
1178 * +u - unauth - See unauthorized client notices
1179 * +w - wallop - See server generated WALLOPS
1180 * +x - external - See remote server connection and split notices
1181 * +y - spy - See LINKS, STATS, TRACE notices etc.
1182 * +z - operwall - See oper generated WALLOPS
1183 */
1184
1185 /* oper_only_umodes: usermodes only opers may set */
1186 oper_only_umodes = bots, cconn, cconn_full, debug, full, hidden, skill,
1187 nchange, rej, spy, external, operwall,
1188 locops, unauth;
1189
1190 /* oper_umodes: default usermodes opers get when they /oper */
1191 oper_umodes = bots, locops, servnotice, operwall, wallop;
1192
1193 /*
1194 * use_egd: if your system does not have *random devices yet you
1195 * want to use OpenSSL and encrypted links, enable this. Beware -
1196 * EGD is *very* CPU intensive when gathering data for its pool
1197 */
1198 # use_egd = yes;
1199
1200 /*
1201 * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1202 * which automatically finds the path.
1203 */
1204 # egdpool_path = "/var/run/egd-pool";
1205
1206 /*
1207 * throttle_time: the minimum amount of time between connections from
1208 * the same ip. exempt {} blocks are excluded from this throttling.
1209 * Offers protection against flooders who reconnect quickly.
1210 * Set to 0 to disable.
1211 */
1212 throttle_time = 0;
1213 };
1214
1215 glines {
1216 /*
1217 * EFnet Note: This feature is required for European EFnet servers
1218 * and is used by several North American servers. As
1219 * such, it has been left on by default. If you
1220 * do not want your server to participate in G:Lines
1221 * you should disable this.
1222 */
1223
1224 /* enable: enable glines, network wide temp klines */
1225 enable = yes;
1226
1227 /*
1228 * duration: the amount of time a gline will remain on your
1229 * server before expiring
1230 */
1231 duration = 1 day;
1232
1233 /*
1234 * log: which types of rules you want to log when triggered
1235 * (choose reject or block)
1236 */
1237 log = reject, block;
1238
1239 /*
1240 * NOTE: gline ACLs can cause a desync of glines throughout the
1241 * network, meaning some servers may have a gline triggered, and
1242 * others may not. Also, you only need insert rules for glines
1243 * that you want to block and/or reject. If you want to accept and
1244 * propagate the gline, do NOT put a rule for it.
1245 */
1246
1247 /* user@host for rule to apply to */
1248 user = "god@I.still.hate.packets";
1249 /* server for rule to apply to */
1250 name = "hades.arpa";
1251
1252 /*
1253 * action: action to take when a matching gline is found. options are:
1254 * reject - do not apply the gline locally
1255 * block - do not propagate the gline
1256 */
1257 action = reject, block;
1258
1259 user = "god@*";
1260 name = "*";
1261 action = block;
1262 };
1263
1264 modules {
1265 /*
1266 * path: other paths to search for modules specified below
1267 * and in /modload.
1268 */
1269 path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1270 path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1271
1272 /* module: the name of a module to load on startup/rehash */
1273 #module = "some_module.la";
1274 };
1275
1276 /*
1277 * log {}: contains information about logfiles.
1278 */
1279 log {
1280 /* Do you want to enable logging to ircd.log? */
1281 use_logging = yes;
1282
1283 file {
1284 type = oper;
1285 name = "/home/ircd/var/log/oper.log";
1286 size = unlimited;
1287 };
1288
1289 file {
1290 type = user;
1291 name = "/home/ircd/var/log/user.log";
1292 size = 50 megabytes;
1293 };
1294
1295 file {
1296 type = kill;
1297 name = "/home/ircd/var/log/kill.log";
1298 size = 50 megabytes;
1299 };
1300
1301 file {
1302 type = kline;
1303 name = "/home/ircd/var/log/kline.log";
1304 size = 50 megabytes;
1305 };
1306
1307 file {
1308 type = dline;
1309 name = "/home/ircd/var/log/dline.log";
1310 size = 50 megabytes;
1311 };
1312
1313 file {
1314 type = gline;
1315 name = "/home/ircd/var/log/gline.log";
1316 size = 50 megabytes;
1317 };
1318
1319 file {
1320 type = debug;
1321 name = "/home/ircd/var/log/debug.log";
1322 size = 50 megabytes;
1323 };
1324 };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.26