ViewVC Help
View File | Revision Log | Show Annotations | View Changeset | Root Listing
root/svn/ircd-hybrid-8/doc/example.efnet.conf
Revision: 902
Committed: Sun Nov 4 14:00:06 2007 UTC (16 years, 4 months ago) by michael
Original Path: ircd-hybrid-7.2/etc/example.efnet.conf.in
File size: 38035 byte(s)
Log Message:
- Move etc/example.efnet.conf to etc/example.efnet.conf.in
- Update configure.ac

File Contents

# Content
1 /* doc/example.efnet.conf - ircd-hybrid-7 EFnet Example configuration file
2 * Copyright (C) 2000-2006 Hybrid Development Team
3 *
4 * Written by ejb, wcampbel, db, leeh and others
5 * Other example configurations can be found in the source dir under
6 * etc/.
7 *
8 * $Id$
9 */
10
11 /* IMPORTANT NOTES:
12 *
13 * auth {} blocks MUST be specified in order of precedence. The first one
14 * that matches a user will be used. So place spoofs first, then specials,
15 * then general access.
16 *
17 * Shell style (#), C++ style (//) and C style comments are supported.
18 *
19 * Files may be included by either:
20 * .include "filename"
21 * .include <filename>
22 *
23 * Times/durations are written as:
24 * 12 hours 30 minutes 1 second
25 *
26 * Valid units of time:
27 * month, week, day, hour, minute, second
28 *
29 * Valid units of size:
30 * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31 *
32 * Sizes and times may be singular or plural.
33 */
34
35 /* EFNET NOTE:
36 *
37 * This configuration file is a BASIC configuration file for use
38 * on EFnet. You MUST still take the time to set this file up
39 * properly.
40 *
41 * DISCLAIMER: This file was submitted by Disciple@EFnet and has
42 * since been modified by the Hybrid team.
43 */
44
45 /*
46 * serverinfo {}: contains information about the server. (OLD M:)
47 */
48 serverinfo {
49 /*
50 * name: the name of our server. This cannot be changed at runtime.
51 */
52 name = "efnet.irc";
53
54 /*
55 * sid: a server's unique ID. This is three characters long and must
56 * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
57 * a digit, followed by 2 alpha-numerical letters.
58 * NOTE: The letters must be capitalized. This cannot be changed at runtime.
59 */
60 sid = "_CHANGE_ME_";
61
62 /*
63 * description: the description of the server. '[' and ']' may not
64 * be used here for compatibility with older servers.
65 */
66 description = "hybrid-7 test server";
67
68 /*
69 * network info: the name and description of the network this server
70 * is on. Shown in the 005 reply and used with serverhiding.
71 */
72 network_name = "EFnet";
73 network_desc = "Eris Free Network";
74
75 /*
76 * hub: allow this server to act as a hub and have multiple servers
77 * connected to it.
78 */
79 hub = no;
80
81 /*
82 * vhost: the IP to bind to when we connect outward to ipv4 servers.
83 * This should be an ipv4 IP only, or "* for INADDR_ANY.
84 */
85 #vhost = "192.169.0.1";
86
87 /*
88 * vhost6: the IP to bind to when we connect outward to ipv6 servers.
89 * This should be an ipv6 IP only, or "* for INADDR_ANY.
90 */
91 #vhost6 = "3ffe:80e8:546::2";
92
93 /* max_clients: the maximum number of clients allowed to connect */
94 max_clients = 512;
95
96 /*
97 * rsa key: the path to the file containing our rsa key for cryptlink.
98 *
99 * Example command to store a 2048 bit RSA keypair in
100 * rsa.key, and the public key in rsa.pub:
101 *
102 * openssl genrsa -out rsa.key 2048
103 * openssl rsa -in rsa.key -pubout -out rsa.pub
104 * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
105 * chmod 0600 rsa.key
106 * chmod 0644 rsa.pub
107 */
108 #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
109 };
110
111 /*
112 * admin {}: contains admin information about the server. (OLD A:)
113 */
114 admin {
115 name = "EFnet Admin";
116 description = "Main Server Administrator";
117 email = "<irc-admin@efnet.irc>";
118 };
119
120 /*
121 * log {}: contains information about logfiles.
122 */
123 log {
124 /* Do you want to enable logging to ircd.log? */
125 use_logging = yes;
126
127 /*
128 * logfiles: the logfiles to use for user connects, /oper uses,
129 * and failed /oper. These files must exist for logging to be used.
130 */
131 fname_userlog = "logs/userlog";
132 fname_operlog = "logs/operlog";
133 fname_killlog = "logs/kill";
134 fname_klinelog = "logs/kline";
135 fname_glinelog = "logs/gline";
136
137 /*
138 * log_level: the amount of detail to log in ircd.log. The
139 * higher, the more information is logged. May be changed
140 * once the server is running via /quote SET LOG. Either:
141 * L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
142 */
143 log_level = L_INFO;
144 };
145
146 /*
147 * class {}: contains information about classes for users (OLD Y:)
148 */
149 class {
150 /* name: the name of the class. classes are text now */
151 name = "users";
152
153 /*
154 * ping_time: how often a client must reply to a PING from the
155 * server before they are dropped.
156 */
157 ping_time = 90 seconds;
158
159 /*
160 * number_per_ip: how many local users are allowed to connect
161 * from one IP (optional)
162 */
163 number_per_ip = 2;
164
165 /*
166 * max_local: how many local users are allowed to connect
167 * from one ident@host (optional)
168 */
169 max_local = 2;
170
171 /*
172 * max_global: network-wide limit of users per ident@host (optional)
173 */
174 max_global = 10;
175
176 /*
177 * max_number: the maximum number of users allowed in this class (optional)
178 */
179 max_number = 100;
180
181 /*
182 * the following lines are optional and allow you to define
183 * how many users can connect from one /NN subnet
184 */
185 cidr_bitlen_ipv4 = 24;
186 cidr_bitlen_ipv6 = 120;
187 number_per_cidr = 16;
188
189 /*
190 * sendq: the amount of data allowed in a clients queue before
191 * they are dropped.
192 */
193 sendq = 100 kbytes;
194 };
195
196 class {
197 name = "opers";
198
199 /*
200 * contrary to seeming popular belief, setting ping time
201 * higher for an oper is NOT doing them a favor.
202 * Since if a link is dead its dead and it means
203 * you have to use another nick long enough to kill the old one :-)
204 * Its much better to use a fairly standard 90 second ping time
205 */
206 ping_time = 90 seconds;
207 number_per_ip = 10;
208 max_number = 100;
209 sendq = 1 mbyte;
210 };
211
212 class {
213 name = "server";
214
215 /*
216 * Same thing here. It's a fallacy to think increasing
217 * ping time for servers is a "good idea." All it leads to
218 * is "ghosting" on one end. Not a good idea.
219 */
220 ping_time = 90 seconds;
221
222 /*
223 * ping_warning: how fast a server must reply to a PING before
224 * a warning to opers is generated.
225 */
226 ping_warning = 15 seconds;
227
228 /*
229 * connectfreq: only used in server classes. Specifies the delay
230 * between autoconnecting to servers.
231 *
232 * Both comstud and I recommend 10 minutes a few years ago.
233 * 15 minutes might be right now. The reason you don't want it too
234 * low is, you make the servers reconnect too quickly with
235 * a large sendq, and they _will_ nick collide. badly. 5 minutes
236 * IS way too short.
237 */
238 connectfreq = 15 minutes;
239
240 /* max number: the amount of servers to autoconnect to */
241 max_number = 1;
242
243 /* sendq: servers need a higher sendq as they send more data */
244 sendq = 15 megabytes;
245 };
246
247 /*
248 * listen {}: contains information about the ports ircd listens on (OLD P:)
249 */
250 listen {
251 /*
252 * port: the specific port to listen on. If no host is specified
253 * before, it will listen on all available IPs.
254 *
255 * Ports are separated via a comma, a range may be specified using ".."
256 */
257
258 /* port: listen on all available IPs, ports 6665 to 6669 */
259 port = 6665 .. 6669;
260
261 /*
262 * Listen on 192.168.0.1/7023 and hidden from STATS P
263 * unless you are an administrator.
264 *
265 * NOTE: The "flags" directive has to come before "port". Always!
266 *
267 * Currently available flags are:
268 *
269 * ssl - Port is for SSL client connections only
270 * server - Only server connections are permitted
271 * hidden - Port is hidden from /stats P
272 */
273 flags = hidden;
274 host = "192.168.0.1";
275 port = 7023;
276
277 /*
278 * host: set a specific IP/host the ports after the line will listen
279 * on. This may be ipv4 or ipv6.
280 */
281 host = "1.2.3.4";
282 port = 7000, 7001;
283
284 host = "3ffe:1234:a:b:c::d";
285 port = 7002;
286 };
287
288 /*
289 * auth {}: allow users to connect to the ircd (OLD I:)
290 */
291 auth {
292 /*
293 * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
294 * lines are permitted per auth block.
295 */
296 user = "*@172.16.0.0/12";
297 user = "*test@123D:B567:*";
298
299 /* password: an optional password that is required to use this block */
300 password = "letmein";
301
302 /*
303 * encrypted: controls whether the auth password above has been
304 * encrypted.
305 */
306 encrypted = yes;
307
308 /*
309 * spoof: fake the users host to this. This is free-form,
310 * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
311 */
312 spoof = "I.still.hate.packets";
313
314 /* class: the class the user is placed in */
315 class = "opers";
316
317 /*
318 * need_password: don't allow users who haven't supplied the correct
319 * password to connect using another auth{} block
320 * ('&' prefix on /stats I if disabled)
321 * need_ident: require the user to have identd to connect ('+' prefix on /stats I)
322 * spoof_notice: enable spoofing notification to admins
323 * exceed_limit: allow a user to exceed class limits ('>' prefix on /stats I)
324 * kline_exempt: exempt this user from k/glines ('^' prefix on /stats I)
325 * gline_exempt: exempt this user from glines ('_' prefix on /stats I)
326 * resv_exempt: exempt this user from resvs ('$' prefix on /stats I)
327 * no_tilde: remove ~ from a user with no ident ('-' prefix on /stats I)
328 * can_flood: allow this user to exceed flood limits ('|' prefix on /stats I)
329 * can_idle: exempt this user from idle restrictions ('<' prefix on /stats I)
330 */
331 flags = need_password, spoof_notice, exceed_limit, kline_exempt,
332 gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
333 };
334
335 auth {
336 /*
337 * redirect: the server and port to redirect a user to. A user does
338 * not have to obey the redirection, the ircd just suggests an alternative
339 * server for them.
340 */
341 redirserv = "this.is.not.a.real.server";
342 redirport = 6667;
343
344 user = "*.server";
345
346 /* class: a class is required even though it is not used */
347 class = "users";
348 };
349
350 auth {
351 user = "*@*";
352 class = "users";
353 flags = need_ident;
354 };
355
356 /*
357 * operator {}: defines ircd operators. (OLD O:)
358 *
359 * ircd-hybrid no longer supports local operators, privileges are
360 * controlled via flags.
361 */
362 operator {
363 /* name: the name of the oper */
364 /* NOTE: operator "opername"{} is also supported */
365 name = "god";
366
367 /*
368 * user: the user@host required for this operator. CIDR is not
369 * supported. Multiple user="" lines are supported.
370 */
371 user = "*god@*";
372 user = "*@127.0.0.1";
373
374 /*
375 * password: the password required to oper. By default this will
376 * need to be encrypted using 'mkpasswd'. MD5 is supported.
377 */
378 password = "etcnjl8juSU1E";
379
380 /*
381 * encrypted: controls whether the oper password above has been
382 * encrypted. (OLD CRYPT_OPER_PASSWORD now optional per operator)
383 */
384 encrypted = yes;
385
386 /*
387 * rsa_public_key_file: the public key for this oper when using Challenge.
388 * A password should not be defined when this is used, see
389 * doc/challenge.txt for more information.
390 */
391 # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
392
393 /* class: the class the oper joins when they successfully /oper */
394 class = "opers";
395
396 /*
397 * umodes: default usermodes opers get when they /oper. If defined,
398 * it will override oper_umodes settings in general {}.
399 * Available usermodes:
400 *
401 * +b - bots - See bot and drone flooding notices
402 * +c - cconn - Client connection/quit notices
403 * +C - cconn_full - Client connection/quit notices full
404 * +D - deaf - Don't receive channel messages
405 * +d - debug - See debugging notices
406 * +f - full - See I: line full notices
407 * +G - softcallerid - Server Side Ignore for users not on your channels
408 * +g - callerid - Server Side Ignore (for privmsgs etc)
409 * +i - invisible - Not shown in NAMES or WHO unless you share a
410 * a channel
411 * +k - skill - See server generated KILL messages
412 * +l - locops - See LOCOPS messages
413 * +n - nchange - See client nick changes
414 * +r - rej - See rejected client notices
415 * +s - servnotice - See general server notices
416 * +u - unauth - See unauthorized client notices
417 * +w - wallop - See server generated WALLOPS
418 * +x - external - See remote server connection and split notices
419 * +y - spy - See LINKS, STATS, TRACE notices etc.
420 * +z - operwall - See oper generated WALLOPS
421 */
422 # umodes = locops, servnotice, operwall, wallop;
423
424 /*
425 * privileges: controls the activities and commands an oper is
426 * allowed to do on the server. All options default to no.
427 * Available options:
428 *
429 * global_kill: allows remote users to be /KILL'd (OLD 'O' flag)
430 * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
431 * remoteban: allows remote KLINE/UNKLINE
432 * kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
433 * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
434 * gline: allows GLINE (OLD 'G' flag)
435 * xline: allows XLINE (OLD 'X' flag)
436 * operwall: allows OPERWALL
437 * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
438 * via usermode +n
439 * rehash: allows oper to REHASH config (OLD 'H' flag)
440 * die: allows DIE and RESTART (OLD 'D' flag)
441 * admin: gives admin privileges. admins
442 * may (un)load modules and see the
443 * real IPs of servers.
444 * hidden_admin: same as 'admin', but noone can recognize you as
445 * being an admin
446 * hidden_oper: not shown in /stats p (except for other operators)
447 */
448 /* You can either use
449 * die = yes;
450 * rehash = yes;
451 *
452 * or in a flags statement i.e.
453 * flags = die, rehash;
454 *
455 * You can also negate a flag with ~ i.e.
456 * flags = ~remote;
457 *
458 */
459 flags = global_kill, remote, kline, unkline, xline,
460 die, rehash, nick_changes, admin, operwall;
461 };
462
463 /*
464 * connect {}: controls servers we connect to (OLD C:, N:, H:, L:)
465 */
466 connect {
467 /* name: the name of the server */
468 name = "irc.uplink.com";
469
470 /*
471 * host: the host or IP to connect to. If a hostname is used it
472 * must match the reverse dns of the server.
473 */
474 host = "192.168.0.1";
475
476 /*
477 * vhost: the IP to bind to when we connect outward to servers.
478 * serverinfo::vhost and serverinfo::vhost6 will be overridden
479 * by this directive.
480 */
481 vhost = "192.168.0.2";
482
483 /*
484 * passwords: the passwords we send (OLD C:) and accept (OLD N:).
485 * The remote server will have these passwords reversed.
486 */
487 send_password = "password";
488 accept_password = "anotherpassword";
489
490 /*
491 * encrypted: controls whether the accept_password above has been
492 * encrypted. (OLD CRYPT_LINK_PASSWORD now optional per connect)
493 */
494 encrypted = no;
495
496 /* port: the port to connect to this server on */
497 port = 6666;
498
499 /*
500 * hub_mask: the mask of servers that this server may hub. Multiple
501 * entries are permitted
502 */
503 hub_mask = "*";
504
505 /*
506 * leaf_mask: the mask of servers this server may not hub. Multiple
507 * entries are permitted. Useful for forbidding EU -> US -> EU routes.
508 */
509 # leaf_mask = "*.uk";
510
511 /* fakename: the servername we pretend to be when we connect */
512 # fakename = "*.arpa";
513
514 /* class: the class this server is in */
515 class = "server";
516
517 /*
518 * autoconn: controls whether we autoconnect to this server or not,
519 * dependent on class limits. By default, this is disabled.
520 * compressed: controls whether traffic is compressed via ziplinks.
521 * By default, this is disabled
522 * cryptlink: enable full encryption for all data passing between our
523 * server and this link and rsa authentication.
524 * burst_away: This will send the /away string that users have set
525 * on the server burst. Note this can be a lot of data
526 * and slow down your server burst.
527 * topicburst: Send topics to this server during channel burst. Works
528 * only if the server we are connecting to is capable
529 * of TBURST/TB.
530 */
531 # flags = autoconn, compressed, cryptlink, burst_away, topicburst;
532 };
533
534 connect {
535 name = "encrypted.auth.example";
536 host = "some.host.somewhere";
537 port = 6667;
538
539 flags = cryptlink;
540
541 /*
542 * rsa_public_key_file: the path to the public keyfile of the server.
543 * Used instead of passwords.
544 */
545 rsa_public_key_file = "etc/remote.server.keyfile";
546
547 /*
548 * cipher preference: set the preferred cipher for this link
549 *
550 * Available ciphers are:
551 * BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
552 * RC5.12/128 RC5.8/128 3DES/168 DES/56
553 *
554 * NOTE: Some ciphers may not be supported by your OpenSSL.
555 * Check the output from 'configure' for available ciphers.
556 *
557 * NOTE2: To help you decide what cipher to use, tools/encspeed
558 * will show you approximately how fast each cipher is.
559 * However, blowfish is fast and secure, and is probably
560 * a good default for most situations.
561 *
562 * NOTE3: Default if none is set is BF/128
563 *
564 * The cipher *MUST* be the same in both directions. If you
565 * set a cipher preference, your uplink must set the same cipher,
566 * else it will not link.
567 */
568 # cipher_preference = "BF/168";
569 };
570
571 /*
572 * NOTE: Don't add an extra 'name=' entry if you use
573 * the connect "name"{} feature
574 */
575 connect "ipv6.some.server" {
576 host = "3ffd:dead:beef::1";
577 send_password = "password";
578 accept_password = "password";
579 port = 6666;
580
581 /*
582 * aftype: controls whether the connection uses "ipv4" or "ipv6".
583 * Default is ipv4.
584 */
585 aftype = ipv6;
586 class = "server";
587 };
588
589 /*
590 * cluster {}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
591 * automatically (OLD hyb6 SLAVE_SERVERS)
592 */
593 cluster {
594 /*
595 * name: the server to share with, this can take wildcards
596 *
597 * NOTE: only local actions will be clustered, meaning if
598 * the server receives a shared kline/unkline/etc, it
599 * will not be propagated to clustered servers.
600 *
601 * Remote servers are not necessarily required to accept
602 * clustered lines, they need a shared{} for *THIS* server
603 * in order to accept them.
604 */
605 name = "*.arpa";
606
607 /*
608 * type: list of what to share, options are as follows:
609 * kline - share klines
610 * tkline - share temporary klines
611 * unkline - share unklines
612 * xline - share xlines
613 * txline - share temporary xlines
614 * unxline - share unxlines
615 * resv - share resvs
616 * tresv - share temporary resvs
617 * unresv - share unresvs
618 * locops - share locops
619 * all - share all of the above (default)
620 */
621 type = kline, unkline, locops, xline, resv;
622 };
623
624 /*
625 * shared {}: users that are allowed to remote kline (OLD U:)
626 *
627 * NOTE: This can be effectively used for remote klines.
628 * Please note that there is no password authentication
629 * for users setting remote klines. You must also be
630 * /oper'd in order to issue a remote kline.
631 */
632 shared {
633 /*
634 * name: the server the user must be on to set klines. If this is not
635 * specified, the user will be allowed to kline from all servers.
636 */
637 name = "irc2.some.server";
638
639 /*
640 * user: the user@host mask that is allowed to set klines. If this is
641 * not specified, all users on the server above will be allowed to set
642 * a remote kline.
643 */
644 user = "oper@my.host.is.spoofed";
645
646 /*
647 * type: list of what to share, options are as follows:
648 * kline - allow oper/server to kline
649 * tkline - allow temporary klines
650 * unkline - allow oper/server to unkline
651 * xline - allow oper/server to xline
652 * txline - allow temporary xlines
653 * unxline - allow oper/server to unxline
654 * resv - allow oper/server to resv
655 * tresv - allow temporary resvs
656 * unresv - allow oper/server to unresv
657 * locops - allow oper/server to locops - only used for servers that cluster
658 * all - allow oper/server to do all of the above (default)
659 */
660 type = kline, unkline, resv;
661 };
662
663 /*
664 * kill {}: users that are not allowed to connect (OLD K:)
665 * Oper issued klines will be added to the specified kline config
666 */
667 kill {
668 user = "bad@*.hacked.edu";
669 reason = "Obviously hacked account";
670 };
671
672 kill {
673 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.org$";
674 type = regex;
675 };
676
677 /*
678 * deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
679 * Oper issued dlines will be added to the specified dline config
680 */
681 deny {
682 ip = "10.0.1.0/24";
683 reason = "Reconnecting vhosted bots";
684 };
685
686 /*
687 * exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:)
688 *
689 * EFnet Note: We really suggest to enable general::stats_e_disabled
690 * if you plan to exempt EFnet server IPs you don't want to show to
691 * other operators and/or administrators through "STATS e".
692 */
693 exempt {
694 ip = "192.168.0.0/16";
695 };
696
697 /*
698 * resv {}: nicks and channels users may not use/join (OLD Q:)
699 */
700 resv {
701 /* reason: the reason for the proceeding resv's */
702 reason = "There are no services on this network";
703
704 /* resv: the nicks and channels users may not join/use */
705 nick = "nickserv";
706 nick = "chanserv";
707 nick = "operserv";
708 nick = "JUPES";
709 nick = "JUPE";
710 nick = "CH?NF?X"; # CHANFIX (services.int)
711
712 /* These are totally optional, but may be a good idea */
713 nick = "oper";
714 nick = "ircop";
715 nick = "op";
716 nick = "ident";
717 nick = "pass";
718 channel = "#jupedchan";
719
720 /* resv: wildcard masks are also supported in nicks only */
721 reason = "Clone bots";
722 nick = "clone*";
723 };
724
725 /*
726 * gecos {}: The X: replacement, used for banning users based on
727 * their "realname".
728 */
729 gecos {
730 name = "*sex*";
731 reason = "Possible spambot";
732 };
733
734 gecos {
735 name = "sub7server";
736 reason = "Trojan drone";
737 };
738
739 gecos {
740 name = "*http*";
741 reason = "Spambot";
742 };
743
744 gecos {
745 name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
746 type = regex;
747 };
748
749 /*
750 * channel {}: The channel block contains options pertaining to channels
751 */
752 channel {
753 /*
754 * disable_fake_channels: this option, if set to 'yes', will
755 * disallow clients to create or join channels that have one
756 * of the following ASCII characters in their name:
757 *
758 * 2 | bold
759 * 3 | mirc color
760 * 15 | plain text
761 * 22 | reverse
762 * 31 | underline
763 * 160 | non-breaking space
764 */
765 disable_fake_channels = yes;
766
767 /*
768 * restrict_channels: reverse channel RESVs logic, only reserved
769 * channels are allowed
770 */
771 restrict_channels = no;
772
773 /*
774 * disable_local_channels: prevent users from joining &channels.
775 */
776 disable_local_channels = no;
777
778 /*
779 * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
780 * that can join a +i channel without an invite.
781 */
782 use_invex = yes;
783
784 /*
785 * use_except: Enable/disable channel mode +e, a n!u@h list of masks
786 * that can join a channel through a ban (+b).
787 */
788 use_except = yes;
789
790 /*
791 * use_knock: Allows users to request an invite to a channel that
792 * is locked somehow (+ikl). If the channel is +p or you are banned
793 * the knock will not be sent.
794 *
795 * EFnet Note: This seems to be used mostly by European servers
796 * and not North American ones.
797 * Please feel free to disable this if you do not
798 * want to run channel knock.
799 * channel knock allows an user to "/quote knock #channel"
800 * to ask for an invite. It is typically used in eu-efnet
801 * to ask for an invite to #eu-opers.
802 * A user who is banned will not have their knock
803 * sent to channel. It is paced, so knock will not
804 * cause a flood.
805 */
806 use_knock = yes;
807
808 /*
809 * knock_delay: The amount of time a user must wait between issuing
810 * the knock command.
811 */
812 knock_delay = 1 minutes;
813
814 /*
815 * knock_delay_channel: How often a knock to any specific channel
816 * is permitted, regardless of the user sending the knock.
817 */
818 knock_delay_channel = 1 minute;
819
820 /*
821 * burst_topicwho: enable sending of who set topic on topicburst
822 * default is yes
823 */
824 burst_topicwho = yes;
825
826 /*
827 * max_chans_per_user: The maximum number of channels a user can
828 * join/be on.
829 */
830 max_chans_per_user = 25;
831
832 /* quiet_on_ban: stop banned people talking in channels. */
833 quiet_on_ban = yes;
834
835 /* max_bans: maximum number of +b/e/I modes in a channel */
836 max_bans = 100;
837
838 /*
839 * how many joins in how many seconds constitute a flood, use 0 to
840 * disable. +b opers will be notified (changeable via /set)
841 */
842 join_flood_count = 16;
843 join_flood_time = 8 seconds;
844
845 /*
846 * splitcode: The ircd will now check splitmode every few seconds.
847 *
848 * Either split users or split servers can activate splitmode, but
849 * both conditions must be met for the ircd to deactivate splitmode.
850 *
851 * You may force splitmode to be permanent by /quote set splitmode on
852 */
853
854 /*
855 * default_split_user_count: when the usercount is lower than this level,
856 * consider ourselves split. This must be set for automatic splitmode.
857 */
858 default_split_user_count = 40000;
859
860 /*
861 * default_split_server_count: when the servercount is lower than this,
862 * consider ourselves split. This must be set for automatic splitmode.
863 */
864 default_split_server_count = 10;
865
866 /* split no create: disallow users creating channels on split. */
867 no_create_on_split = yes;
868
869 /* split: no join: disallow users joining channels at all on a split */
870 no_join_on_split = no;
871 };
872
873 /*
874 * serverhide {}: The serverhide block contains the options regarding
875 * serverhiding
876 */
877 serverhide {
878 /*
879 * flatten_links: this option will show all servers in /links appear
880 * that they are linked to this current server
881 *
882 * EFnet Note: While this is not a requirement on EFnet, it
883 * may be a good idea. Except, it's useless
884 * unless the entire net runs it.
885 */
886 flatten_links = yes;
887
888 /*
889 * links_delay: how often to update the links file when it is
890 * flattened.
891 */
892 links_delay = 5 minutes;
893
894 /*
895 * hidden: hide this server from a /links output on servers that
896 * support it. This allows hub servers to be hidden etc.
897 */
898 hidden = no;
899
900 /*
901 * disable_hidden: prevent servers hiding themselves from a
902 * /links output.
903 */
904 disable_hidden = no;
905
906 /*
907 * hide_servers: hide remote servernames everywhere and instead use
908 * hidden_name and network_desc.
909 */
910 hide_servers = no;
911
912 /*
913 * Use this as the servername users see if hide_servers = yes.
914 */
915 hidden_name = "*.hidden.com";
916
917 /*
918 * hide_server_ips: If this is disabled, opers will be unable to see servers
919 * ips and will be shown a masked ip, admins will be shown the real ip.
920 *
921 * If this is enabled, nobody can see a servers ip. *This is a kludge*, it
922 * has the side effect of hiding the ips everywhere, including logfiles.
923 *
924 * We recommend you leave this disabled, and just take care with who you
925 * give admin=yes; to.
926 */
927 hide_server_ips = yes;
928 };
929
930 /*
931 * general {}: The general block contains many of the options that were once
932 * compiled in options in config.h. The general block is read at start time.
933 */
934 general {
935 /* max_watch: maximum WATCH entries */
936 max_watch = 64;
937
938 /*
939 * gline_min_cidr: the minimum required length of a CIDR bitmask
940 * for IPv4 based glines
941 */
942 gline_min_cidr = 16;
943
944 /*
945 * gline_min_cidr6: the minimum required length of a CIDR bitmask
946 * for IPv6 based glines
947 */
948 gline_min_cidr6 = 48;
949
950 /*
951 * Whether to automatically set mode +i on connecting users.
952 */
953 invisible_on_connect = yes;
954
955 /*
956 * If you don't explicitly specify burst_away in your connect blocks, then
957 * they will default to the burst_away value below.
958 */
959 burst_away = no;
960
961 /*
962 * Show "actually using host <ip>" on /whois when possible.
963 */
964 use_whois_actually = yes;
965
966 /*
967 * Max time from the nickname change that still causes KILL
968 * automatically to switch for the current nick of that user. (seconds)
969 */
970 kill_chase_time_limit = 90;
971
972 /*
973 * If hide_spoof_ips is disabled, opers will be allowed to see the real IP of spoofed
974 * users in /trace etc. If this is defined they will be shown a masked IP.
975 */
976 hide_spoof_ips = yes;
977
978 /*
979 * Ignore bogus timestamps from other servers. Yes, this will desync
980 * the network, but it will allow chanops to resync with a valid non TS 0
981 *
982 * This should be enabled network wide, or not at all.
983 */
984 ignore_bogus_ts = no;
985
986 /*
987 * disable_auth: completely disable ident lookups; if you enable this,
988 * be careful of what you set need_ident to in your auth {} blocks
989 */
990 disable_auth = no;
991
992 /* disable_remote_commands: disable users doing commands on remote servers */
993 disable_remote_commands = no;
994
995 /*
996 * tkline_expire_notices: enables or disables temporary kline/xline
997 * expire notices.
998 */
999 tkline_expire_notices = no;
1000
1001 /*
1002 * default_floodcount: the default value of floodcount that is configurable
1003 * via /quote set floodcount. This is the amount of lines a user
1004 * may send to any other user/channel in one second.
1005 */
1006 default_floodcount = 10;
1007
1008 /*
1009 * failed_oper_notice: send a notice to all opers on the server when
1010 * someone tries to OPER and uses the wrong password, host or ident.
1011 */
1012 failed_oper_notice = yes;
1013
1014 /*
1015 * dots_in_ident: the amount of '.' characters permitted in an ident
1016 * reply before the user is rejected.
1017 */
1018 dots_in_ident = 0;
1019
1020 /*
1021 * dot_in_ip6_addr: ircd-hybrid-6.0 and earlier will disallow hosts
1022 * without a '.' in them. This will add one to the end. Only needed
1023 * for older servers.
1024 */
1025 dot_in_ip6_addr = no;
1026
1027 /*
1028 * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1029 * placed via the server. klines hand placed are exempt from limits.
1030 * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1031 */
1032 min_nonwildcard = 3;
1033
1034 /*
1035 * min_nonwildcard_simple: the minimum non wildcard characters in
1036 * gecos bans. wildcard chars: '*' '?' '#'
1037 */
1038 min_nonwildcard_simple = 3;
1039
1040 /* max_accept: maximum allowed /accept's for +g usermode */
1041 max_accept = 20;
1042
1043 /* anti_nick_flood: enable the nickflood control code */
1044 anti_nick_flood = yes;
1045
1046 /* nick flood: the nick changes allowed in the specified period */
1047 max_nick_time = 20 seconds;
1048 max_nick_changes = 5;
1049
1050 /*
1051 * anti_spam_exit_message_time: the minimum time a user must be connected
1052 * before custom quit messages are allowed.
1053 */
1054 anti_spam_exit_message_time = 5 minutes;
1055
1056 /*
1057 * ts delta: the time delta allowed between server clocks before
1058 * a warning is given, or before the link is dropped. all servers
1059 * should run ntpdate/rdate to keep clocks in sync
1060 */
1061 ts_warn_delta = 30 seconds;
1062 ts_max_delta = 5 minutes;
1063
1064 /*
1065 * kline_with_reason: show the user the reason why they are k/d/glined
1066 * on exit. May give away who set k/dline when set via tcm.
1067 */
1068 kline_with_reason = yes;
1069
1070 /*
1071 * kline_reason: show this message to users on channel
1072 * instead of the oper reason.
1073 */
1074 kline_reason = "Connection closed";
1075
1076 /*
1077 * reject_hold_time: wait this amount of time before disconnecting
1078 * a rejected client. Use 0 to disable.
1079 */
1080 reject_hold_time = 30 seconds;
1081
1082 /*
1083 * warn_no_nline: warn opers about servers that try to connect but
1084 * we don't have a connect {} block for. Twits with misconfigured
1085 * servers can get really annoying with this enabled.
1086 */
1087 warn_no_nline = yes;
1088
1089 /*
1090 * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1091 * operators and administrators. Doing so is a good idea in case
1092 * there are any exempted (exempt{}) server IPs you don't want to
1093 * see leaked.
1094 */
1095 stats_e_disabled = no;
1096
1097 /* stats_o_oper only: make stats o (opers) oper only */
1098 stats_o_oper_only = yes;
1099
1100 /* stats_P_oper_only: make stats P (ports) oper only */
1101 stats_P_oper_only = yes;
1102
1103 /*
1104 * stats i oper only: make stats i (auth {}) oper only. set to:
1105 * yes: show users no auth blocks, made oper only.
1106 * masked: show users first matching auth block
1107 * no: show users all auth blocks.
1108 */
1109 stats_i_oper_only = yes;
1110
1111 /*
1112 * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1113 * yes: show users no auth blocks, made oper only
1114 * masked: show users first matching auth block
1115 * no: show users all auth blocks.
1116 */
1117 stats_k_oper_only = yes;
1118
1119 /*
1120 * caller_id_wait: time between notifying a +g user that somebody
1121 * is messaging them.
1122 */
1123 caller_id_wait = 1 minute;
1124
1125 /*
1126 * opers_bypass_callerid: allows operators to bypass +g and message
1127 * anyone who has it set (useful if you use services).
1128 */
1129 opers_bypass_callerid = no;
1130
1131 /*
1132 * pace_wait_simple: time between use of less intensive commands
1133 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1134 */
1135 pace_wait_simple = 1 second;
1136
1137 /*
1138 * pace_wait: time between more intensive commands
1139 * (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1140 */
1141 pace_wait = 10 seconds;
1142
1143 /*
1144 * short_motd: send clients a notice telling them to read the motd
1145 * instead of forcing a motd to clients who may simply ignore it.
1146 */
1147 short_motd = no;
1148
1149 /*
1150 * ping_cookie: require clients to respond exactly to a ping command,
1151 * can help block certain types of drones and FTP PASV mode spoofing.
1152 */
1153 ping_cookie = no;
1154
1155 /* no_oper_flood: increase flood limits for opers. */
1156 no_oper_flood = yes;
1157
1158 /*
1159 * true_no_oper_flood: completely eliminate flood limits for opers
1160 * and for clients with can_flood = yes in their auth {} blocks
1161 */
1162 true_no_oper_flood = yes;
1163
1164 /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1165 oper_pass_resv = yes;
1166
1167 /*
1168 * idletime: the maximum amount of time a user may idle before
1169 * they are disconnected
1170 */
1171 idletime = 0;
1172
1173 /* REMOVE ME. The following line checks you've been reading. */
1174 havent_read_conf = 1;
1175
1176 /*
1177 * max_targets: the maximum amount of targets in a single
1178 * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1179 */
1180 max_targets = 4;
1181
1182 /*
1183 * client_flood: maximum amount of data in a clients queue before
1184 * they are dropped for flooding.
1185 */
1186 client_flood = 2560 bytes;
1187
1188 /*
1189 * message_locale: the default message locale
1190 * Use "standard" for the compiled in defaults.
1191 * To install the translated messages, go into messages/ in the
1192 * source directory and run `make install'.
1193 */
1194 message_locale = "standard";
1195
1196 /*
1197 * usermodes configurable: a list of usermodes for the options below
1198 *
1199 * +b - bots - See bot and drone flooding notices
1200 * +c - cconn - Client connection/quit notices
1201 * +C - cconn - Client connection/quit notices full
1202 * +D - deaf - Don't receive channel messages
1203 * +d - debug - See debugging notices
1204 * +f - full - See I: line full notices
1205 * +G - softcallerid - Server Side Ignore for users not on your channels
1206 * +g - callerid - Server Side Ignore (for privmsgs etc)
1207 * +i - invisible - Not shown in NAMES or WHO unless you share a
1208 * a channel
1209 * +k - skill - See server generated KILL messages
1210 * +l - locops - See LOCOPS messages
1211 * +n - nchange - See client nick changes
1212 * +r - rej - See rejected client notices
1213 * +s - servnotice - See general server notices
1214 * +u - unauth - See unauthorized client notices
1215 * +w - wallop - See server generated WALLOPS
1216 * +x - external - See remote server connection and split notices
1217 * +y - spy - See LINKS, STATS, TRACE notices etc.
1218 * +z - operwall - See oper generated WALLOPS
1219 */
1220
1221 /* oper_only_umodes: usermodes only opers may set */
1222 oper_only_umodes = bots, cconn, cconn_full, debug, full, skill,
1223 nchange, rej, spy, external, operwall,
1224 locops, unauth;
1225
1226 /* oper_umodes: default usermodes opers get when they /oper */
1227 oper_umodes = bots, locops, servnotice, operwall, wallop;
1228
1229 /*
1230 * servlink_path: path to 'servlink' program used by ircd to handle
1231 * encrypted/compressed server <-> server links.
1232 *
1233 * only define if servlink is not in same directory as ircd itself.
1234 */
1235 #servlink_path = "/usr/local/ircd/bin/servlink";
1236
1237 /*
1238 * default_cipher_preference: default cipher to use for cryptlink when none is
1239 * specified in connect block.
1240 */
1241 #default_cipher_preference = "BF/168";
1242
1243 /*
1244 * use_egd: if your system does not have *random devices yet you
1245 * want to use OpenSSL and encrypted links, enable this. Beware -
1246 * EGD is *very* CPU intensive when gathering data for its pool
1247 */
1248 # use_egd = yes;
1249
1250 /*
1251 * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1252 * which automatically finds the path.
1253 */
1254 # egdpool_path = "/var/run/egd-pool";
1255
1256
1257 /*
1258 * compression_level: level of compression for compressed links between
1259 * servers.
1260 *
1261 * values are between: 1 (least compression, fastest)
1262 * and: 9 (most compression, slowest).
1263 */
1264 # compression_level = 6;
1265
1266 /*
1267 * throttle_time: the minimum amount of time between connections from
1268 * the same ip. exempt {} blocks are excluded from this throttling.
1269 * Offers protection against flooders who reconnect quickly.
1270 * Set to 0 to disable.
1271 */
1272 throttle_time = 0;
1273 };
1274
1275 glines {
1276 /*
1277 * EFnet Note: This feature is required for European EFnet servers
1278 * and is used by several North American servers. As
1279 * such, it has been left on by default. If you
1280 * do not want your server to participate in G:Lines
1281 * you should disable this.
1282 */
1283
1284 /* enable: enable glines, network wide temp klines */
1285 enable = yes;
1286
1287 /*
1288 * duration: the amount of time a gline will remain on your
1289 * server before expiring
1290 */
1291 duration = 1 day;
1292
1293 /*
1294 * logging: which types of rules you want to log when triggered
1295 * (choose reject or block)
1296 */
1297 logging = reject, block;
1298
1299 /*
1300 * NOTE: gline ACLs can cause a desync of glines throughout the
1301 * network, meaning some servers may have a gline triggered, and
1302 * others may not. Also, you only need insert rules for glines
1303 * that you want to block and/or reject. If you want to accept and
1304 * propagate the gline, do NOT put a rule for it.
1305 */
1306
1307 /* user@host for rule to apply to */
1308 user = "god@I.still.hate.packets";
1309 /* server for rule to apply to */
1310 name = "hades.arpa";
1311
1312 /*
1313 * action: action to take when a matching gline is found. options are:
1314 * reject - do not apply the gline locally
1315 * block - do not propagate the gline
1316 */
1317 action = reject, block;
1318
1319 user = "god@*";
1320 name = "*";
1321 action = block;
1322 };
1323
1324 modules {
1325 /*
1326 * module path: other paths to search for modules specified below
1327 * and in /modload.
1328 */
1329 path = "@datadir@/modules";
1330 path = "@datadir@/autoload";
1331
1332 /* module: the name of a module to load on startup/rehash */
1333 #module = "some_module.so";
1334 };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision