/[svn]/ircd-hybrid-8/doc/example.efnet.conf
ViewVC logotype

Annotation of /ircd-hybrid-8/doc/example.efnet.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1336 - (hide annotations)
Sun Apr 1 18:23:29 2012 UTC (8 years, 6 months ago) by michael
File size: 37061 byte(s)
- Update documents, remove outdated ones

1 michael 1336 /* doc/example.efnet.conf - ircd-hybrid-8 EFnet Example configuration file
2 michael 1334 * Copyright (C) 2000-2012 Hybrid Development Team
3 adx 30 *
4     * Written by ejb, wcampbel, db, leeh and others
5     * Other example configurations can be found in the source dir under
6     * etc/.
7     *
8 knight 31 * $Id$
9 adx 30 */
10    
11     /* IMPORTANT NOTES:
12     *
13     * auth {} blocks MUST be specified in order of precedence. The first one
14     * that matches a user will be used. So place spoofs first, then specials,
15     * then general access.
16     *
17     * Shell style (#), C++ style (//) and C style comments are supported.
18     *
19     * Files may be included by either:
20     * .include "filename"
21     * .include <filename>
22     *
23     * Times/durations are written as:
24     * 12 hours 30 minutes 1 second
25     *
26     * Valid units of time:
27     * month, week, day, hour, minute, second
28     *
29     * Valid units of size:
30     * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31     *
32     * Sizes and times may be singular or plural.
33     */
34    
35     /* EFNET NOTE:
36 michael 583 *
37 adx 30 * This configuration file is a BASIC configuration file for use
38     * on EFnet. You MUST still take the time to set this file up
39     * properly.
40     *
41     * DISCLAIMER: This file was submitted by Disciple@EFnet and has
42     * since been modified by the Hybrid team.
43     */
44    
45 michael 583 /*
46 michael 1229 * serverinfo {}: contains information about the server
47 michael 583 */
48 adx 30 serverinfo {
49 michael 583 /*
50 michael 1070 * name: the name of this server. This cannot be changed at runtime.
51 michael 583 */
52 adx 30 name = "efnet.irc";
53    
54     /*
55 michael 583 * sid: a server's unique ID. This is three characters long and must
56     * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
57     * a digit, followed by 2 alpha-numerical letters.
58     * NOTE: The letters must be capitalized. This cannot be changed at runtime.
59 adx 30 */
60     sid = "_CHANGE_ME_";
61    
62     /*
63     * description: the description of the server. '[' and ']' may not
64     * be used here for compatibility with older servers.
65     */
66     description = "hybrid-7 test server";
67    
68     /*
69     * network info: the name and description of the network this server
70     * is on. Shown in the 005 reply and used with serverhiding.
71     */
72     network_name = "EFnet";
73     network_desc = "Eris Free Network";
74    
75     /*
76     * hub: allow this server to act as a hub and have multiple servers
77 michael 885 * connected to it.
78 adx 30 */
79     hub = no;
80    
81     /*
82     * vhost: the IP to bind to when we connect outward to ipv4 servers.
83 michael 959 * This should be an ipv4 IP only, or "*" for INADDR_ANY.
84 adx 30 */
85     #vhost = "192.169.0.1";
86    
87     /*
88     * vhost6: the IP to bind to when we connect outward to ipv6 servers.
89 michael 959 * This should be an ipv6 IP only, or "*" for INADDR_ANY.
90 adx 30 */
91     #vhost6 = "3ffe:80e8:546::2";
92    
93     /* max_clients: the maximum number of clients allowed to connect */
94     max_clients = 512;
95    
96     /*
97 michael 951 * rsa_private_key_file: the path to the file containing our
98     * rsa key for cryptlink.
99 adx 30 *
100     * Example command to store a 2048 bit RSA keypair in
101     * rsa.key, and the public key in rsa.pub:
102     *
103 michael 1229 * openssl genrsa -out rsa.key 2048
104 adx 30 * openssl rsa -in rsa.key -pubout -out rsa.pub
105     * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
106     * chmod 0600 rsa.key
107     * chmod 0644 rsa.pub
108     */
109     #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
110 michael 951
111     /*
112     * ssl_certificate_file: the path to the file containing our
113     * ssl certificate for encrypted client connection.
114     *
115     * This assumes your private RSA key is stored in rsa.key. You
116     * MUST have an RSA key in order to generate the certificate
117     *
118     * openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
119     *
120     * See http://www.openssl.org/docs/HOWTO/certificates.txt
121     *
122     * Please use the following values when generating the cert
123     *
124     * Organization Name: Network Name
125     * Organization Unit Name: changme.someirc.net
126     * Common Name: irc.someirc.net
127     * E-mail: you@domain.com
128     */
129     #ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
130 michael 967
131 michael 1306 #ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
132    
133 michael 967 /*
134 michael 1306 * ssl_cipher_list:
135     *
136     * List of ciphers that are supported by _this_ server. Can be used to enforce
137     * specific ciphers for incoming SSL/TLS connections.
138     * If a client (which also includes incoming server connections) isn't capable
139     * of any cipher listed below, the connection will be simply rejected.
140     *
141     * A list of supported ciphers can be obtained by running:
142     *
143     * openssl ciphers -ssl3 -tls1 -v
144     *
145     * Multiple ciphers are separated by colons. The order of preference is from
146     * left to right.
147     */
148     #ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
149    
150     /*
151 michael 967 * ssl_server_protocol:
152     * SSL/TLS protocols we provide for incoming secure connections.
153     * This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
154 michael 1316 * SSLv2 is not suppported.
155 michael 967 */
156 michael 1316 #ssl_server_method = tlsv1, sslv3;
157     #ssl_client_method = tlsv1;
158 adx 30 };
159    
160 michael 583 /*
161 michael 1229 * admin {}: contains admin information about the server
162 michael 583 */
163 adx 30 admin {
164     name = "EFnet Admin";
165     description = "Main Server Administrator";
166     email = "<irc-admin@efnet.irc>";
167     };
168    
169 michael 583 /*
170 michael 1229 * class {}: contains information about classes for users
171 michael 583 */
172 adx 30 class {
173     /* name: the name of the class. classes are text now */
174     name = "users";
175    
176     /*
177     * ping_time: how often a client must reply to a PING from the
178     * server before they are dropped.
179     */
180     ping_time = 90 seconds;
181    
182 michael 583 /*
183     * number_per_ip: how many local users are allowed to connect
184     * from one IP (optional)
185     */
186 adx 30 number_per_ip = 2;
187    
188 michael 583 /*
189     * max_local: how many local users are allowed to connect
190     * from one ident@host (optional)
191     */
192 adx 30 max_local = 2;
193    
194 michael 583 /*
195     * max_global: network-wide limit of users per ident@host (optional)
196     */
197 adx 30 max_global = 10;
198    
199 michael 583 /*
200     * max_number: the maximum number of users allowed in this class (optional)
201     */
202 adx 30 max_number = 100;
203    
204 michael 583 /*
205     * the following lines are optional and allow you to define
206     * how many users can connect from one /NN subnet
207     */
208     cidr_bitlen_ipv4 = 24;
209     cidr_bitlen_ipv6 = 120;
210     number_per_cidr = 16;
211 adx 40
212 adx 30 /*
213     * sendq: the amount of data allowed in a clients queue before
214     * they are dropped.
215     */
216     sendq = 100 kbytes;
217     };
218    
219     class {
220     name = "opers";
221    
222     /*
223     * contrary to seeming popular belief, setting ping time
224     * higher for an oper is NOT doing them a favor.
225     * Since if a link is dead its dead and it means
226     * you have to use another nick long enough to kill the old one :-)
227     * Its much better to use a fairly standard 90 second ping time
228     */
229     ping_time = 90 seconds;
230     number_per_ip = 10;
231     max_number = 100;
232     sendq = 1 mbyte;
233     };
234    
235     class {
236     name = "server";
237    
238     /*
239 michael 583 * Same thing here. It's a fallacy to think increasing
240 adx 30 * ping time for servers is a "good idea." All it leads to
241     * is "ghosting" on one end. Not a good idea.
242     */
243     ping_time = 90 seconds;
244    
245 michael 583 /*
246     * ping_warning: how fast a server must reply to a PING before
247     * a warning to opers is generated.
248     */
249     ping_warning = 15 seconds;
250 adx 30
251     /*
252     * connectfreq: only used in server classes. Specifies the delay
253     * between autoconnecting to servers.
254     *
255     * Both comstud and I recommend 10 minutes a few years ago.
256     * 15 minutes might be right now. The reason you don't want it too
257     * low is, you make the servers reconnect too quickly with
258     * a large sendq, and they _will_ nick collide. badly. 5 minutes
259     * IS way too short.
260     */
261     connectfreq = 15 minutes;
262    
263     /* max number: the amount of servers to autoconnect to */
264     max_number = 1;
265    
266 michael 583 /* sendq: servers need a higher sendq as they send more data */
267 adx 30 sendq = 15 megabytes;
268     };
269    
270 michael 583 /*
271 michael 1229 * listen {}: contains information about the ports ircd listens on
272 michael 583 */
273 adx 30 listen {
274     /*
275     * port: the specific port to listen on. If no host is specified
276     * before, it will listen on all available IPs.
277     *
278     * Ports are separated via a comma, a range may be specified using ".."
279     */
280    
281     /* port: listen on all available IPs, ports 6665 to 6669 */
282     port = 6665 .. 6669;
283    
284     /*
285 michael 951 * Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
286 adx 30 * unless you are an administrator.
287     *
288     * NOTE: The "flags" directive has to come before "port". Always!
289 michael 900 *
290     * Currently available flags are:
291     *
292     * ssl - Port is for SSL client connections only
293     * server - Only server connections are permitted
294 michael 1229 * hidden - Port is hidden from /stats P, unless you're an admin
295 adx 30 */
296 michael 951 flags = hidden, ssl;
297 adx 30 host = "192.168.0.1";
298 michael 951 port = 6697;
299 adx 30
300     /*
301     * host: set a specific IP/host the ports after the line will listen
302     * on. This may be ipv4 or ipv6.
303     */
304     host = "1.2.3.4";
305     port = 7000, 7001;
306    
307     host = "3ffe:1234:a:b:c::d";
308     port = 7002;
309     };
310    
311 michael 583 /*
312 michael 1229 * auth {}: allow users to connect to the ircd
313 michael 583 */
314 adx 30 auth {
315     /*
316     * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
317     * lines are permitted per auth block.
318     */
319     user = "*@172.16.0.0/12";
320     user = "*test@123D:B567:*";
321    
322     /* password: an optional password that is required to use this block */
323     password = "letmein";
324    
325     /*
326     * encrypted: controls whether the auth password above has been
327     * encrypted.
328     */
329     encrypted = yes;
330    
331     /*
332     * spoof: fake the users host to this. This is free-form,
333     * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
334     */
335     spoof = "I.still.hate.packets";
336    
337     /* class: the class the user is placed in */
338     class = "opers";
339    
340     /*
341 michael 1229 * need_password - don't allow users who haven't supplied the correct
342     * password to connect using another auth{} block
343     * ('&' prefix on /stats I if disabled)
344     * need_ident - require the user to have identd to connect ('+' prefix on /stats I)
345     * spoof_notice - enable spoofing notification to admins
346     * exceed_limit - allow a user to exceed class limits ('>' prefix on /stats I)
347     * kline_exempt - exempt this user from k/glines ('^' prefix on /stats I)
348     * gline_exempt - exempt this user from glines ('_' prefix on /stats I)
349     * resv_exempt - exempt this user from resvs ('$' prefix on /stats I)
350     * no_tilde - remove ~ from a user with no ident ('-' prefix on /stats I)
351     * can_flood - allow this user to exceed flood limits ('|' prefix on /stats I)
352 adx 30 */
353     flags = need_password, spoof_notice, exceed_limit, kline_exempt,
354 michael 1176 gline_exempt, resv_exempt, no_tilde, can_flood;
355 adx 30 };
356    
357     auth {
358     /*
359     * redirect: the server and port to redirect a user to. A user does
360     * not have to obey the redirection, the ircd just suggests an alternative
361     * server for them.
362     */
363 db 806 redirserv = "this.is.not.a.real.server";
364 adx 30 redirport = 6667;
365    
366 db 806 user = "*.server";
367 adx 30
368     /* class: a class is required even though it is not used */
369     class = "users";
370     };
371    
372     auth {
373     user = "*@*";
374     class = "users";
375     flags = need_ident;
376     };
377    
378 michael 583 /*
379 michael 1229 * operator {}: defines ircd operators
380 michael 583 *
381 adx 30 * ircd-hybrid no longer supports local operators, privileges are
382     * controlled via flags.
383     */
384     operator {
385     /* name: the name of the oper */
386     name = "god";
387    
388     /*
389 michael 1303 * user: the user@host required for this operator. Multiple
390     * user="" lines are supported.
391 adx 30 */
392 michael 1285 user = "*god@192.168.0.0/16";
393     user = "*@127.0.0.0/8";
394 adx 30
395     /*
396     * password: the password required to oper. By default this will
397 michael 1070 * need to be encrypted by using the provided mkpasswd tool.
398     * Several password hash algorithms are available depending
399     * on your system's crypt() implementation. For example, a modern
400     * glibc already has support for SHA-256/512, and MD5 encryption
401     * algorithms.
402 adx 30 */
403 michael 1070 password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
404 adx 30
405     /*
406     * encrypted: controls whether the oper password above has been
407 michael 1070 * encrypted.
408 adx 30 */
409     encrypted = yes;
410    
411     /*
412     * rsa_public_key_file: the public key for this oper when using Challenge.
413     * A password should not be defined when this is used, see
414     * doc/challenge.txt for more information.
415     */
416     # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
417    
418     /* class: the class the oper joins when they successfully /oper */
419     class = "opers";
420    
421     /*
422 michael 56 * umodes: default usermodes opers get when they /oper. If defined,
423     * it will override oper_umodes settings in general {}.
424     * Available usermodes:
425     *
426     * +b - bots - See bot and drone flooding notices
427     * +c - cconn - Client connection/quit notices
428 db 853 * +C - cconn_full - Client connection/quit notices full
429 michael 56 * +D - deaf - Don't receive channel messages
430     * +d - debug - See debugging notices
431     * +f - full - See I: line full notices
432     * +G - softcallerid - Server Side Ignore for users not on your channels
433     * +g - callerid - Server Side Ignore (for privmsgs etc)
434 michael 1294 * +H - hidden - Hides operator status to other users
435 michael 56 * +i - invisible - Not shown in NAMES or WHO unless you share a
436     * a channel
437 michael 1290 * +j - rej - See rejected client notices
438 michael 56 * +k - skill - See server generated KILL messages
439     * +l - locops - See LOCOPS messages
440     * +n - nchange - See client nick changes
441     * +s - servnotice - See general server notices
442     * +u - unauth - See unauthorized client notices
443     * +w - wallop - See server generated WALLOPS
444     * +x - external - See remote server connection and split notices
445     * +y - spy - See LINKS, STATS, TRACE notices etc.
446     * +z - operwall - See oper generated WALLOPS
447     */
448     # umodes = locops, servnotice, operwall, wallop;
449    
450     /*
451 adx 30 * privileges: controls the activities and commands an oper is
452 michael 1228 * allowed to do on the server. All options default to no.
453 adx 30 * Available options:
454     *
455 michael 1229 * module - allows MODLIST, MODRESTART, MODLOAD, MODUNLOAD
456     * global_kill - allows remote users to be /KILL'd
457     * remote - allows remote SQUIT and CONNECT
458     * remoteban - allows remote KLINE/UNKLINE
459 michael 1301 * dline - allows DLINE
460     * undline - allows UNDLINE
461 michael 1336 * kline - allows KILL and KLINE
462 michael 1301 * unkline - allows UNKLINE
463 michael 1229 * gline - allows GLINE
464     * xline - allows XLINE
465     * globops - allows GLOBOPS
466     * operwall - allows OPERWALL
467     * nick_changes - allows oper to see nickchanges via usermode +n
468     * rehash - allows oper to REHASH config
469     * die - allows DIE
470     * restart - allows RESTART
471     * admin - gives admin privileges. admins for example,
472     * may see the real IP addresses of servers.
473 adx 30 */
474 michael 1228 flags = global_kill, remote, kline, unkline, xline, globops, restart,
475     die, rehash, nick_changes, admin, operwall, module;
476 adx 30 };
477    
478 michael 583 /*
479 michael 1229 * connect {}: controls servers we connect to
480 michael 583 */
481 adx 30 connect {
482     /* name: the name of the server */
483     name = "irc.uplink.com";
484    
485     /*
486     * host: the host or IP to connect to. If a hostname is used it
487     * must match the reverse dns of the server.
488     */
489     host = "192.168.0.1";
490    
491 michael 583 /*
492     * vhost: the IP to bind to when we connect outward to servers.
493     * serverinfo::vhost and serverinfo::vhost6 will be overridden
494     * by this directive.
495     */
496     vhost = "192.168.0.2";
497 michael 548
498 adx 30 /*
499     * passwords: the passwords we send (OLD C:) and accept (OLD N:).
500     * The remote server will have these passwords reversed.
501     */
502     send_password = "password";
503     accept_password = "anotherpassword";
504    
505     /*
506     * encrypted: controls whether the accept_password above has been
507 michael 1070 * encrypted.
508 adx 30 */
509     encrypted = no;
510    
511     /* port: the port to connect to this server on */
512     port = 6666;
513    
514     /*
515 michael 583 * hub_mask: the mask of servers that this server may hub. Multiple
516 adx 30 * entries are permitted
517     */
518     hub_mask = "*";
519    
520     /*
521     * leaf_mask: the mask of servers this server may not hub. Multiple
522     * entries are permitted. Useful for forbidding EU -> US -> EU routes.
523     */
524     # leaf_mask = "*.uk";
525    
526     /* class: the class this server is in */
527     class = "server";
528    
529 michael 1306 #ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
530    
531 adx 30 /*
532 michael 1229 * autoconn - controls whether we autoconnect to this server or not,
533 michael 1303 * dependent on class limits. By default, this is disabled.
534 michael 1229 * burst_away - This will send the /away string that users have set
535 michael 1303 * on the server burst. Note this can be a lot of data
536 adx 30 * and slow down your server burst.
537 michael 1303 * topicburst - Send topics to this server during channel burst. Works
538 michael 330 * only if the server we are connecting to is capable
539     * of TBURST/TB.
540 michael 1303 * ssl - Initiates a TLS/SSL connection.
541 adx 30 */
542 michael 1302 # flags = autoconn, burst_away, topicburst;
543 adx 30 };
544    
545 michael 1303 connect {
546 michael 1285 name = "ipv6.some.server";
547 adx 30 host = "3ffd:dead:beef::1";
548     send_password = "password";
549     accept_password = "password";
550     port = 6666;
551    
552     /*
553     * aftype: controls whether the connection uses "ipv4" or "ipv6".
554     * Default is ipv4.
555     */
556     aftype = ipv6;
557     class = "server";
558     };
559    
560 michael 583 /*
561     * cluster {}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
562 michael 1229 * automatically
563 adx 30 */
564     cluster {
565 michael 583 /*
566     * name: the server to share with, this can take wildcards
567     *
568     * NOTE: only local actions will be clustered, meaning if
569 adx 30 * the server receives a shared kline/unkline/etc, it
570     * will not be propagated to clustered servers.
571     *
572     * Remote servers are not necessarily required to accept
573     * clustered lines, they need a shared{} for *THIS* server
574     * in order to accept them.
575     */
576     name = "*.arpa";
577    
578     /*
579     * type: list of what to share, options are as follows:
580 michael 1301 * dline - share dlines
581     * undline - share undlines
582 michael 1336 * kline - share klines
583     * unkline - share unklines
584     * xline - share xlines
585     * unxline - share unxlines
586     * resv - share resvs
587     * unresv - share unresvs
588     * locops - share locops
589     * all - share all of the above (default)
590 adx 30 */
591     type = kline, unkline, locops, xline, resv;
592     };
593    
594 michael 583 /*
595 michael 1229 * shared {}: users that are allowed to remote kline
596 adx 30 *
597 michael 583 * NOTE: This can be effectively used for remote klines.
598     * Please note that there is no password authentication
599     * for users setting remote klines. You must also be
600     * /oper'd in order to issue a remote kline.
601 adx 30 */
602     shared {
603     /*
604     * name: the server the user must be on to set klines. If this is not
605     * specified, the user will be allowed to kline from all servers.
606     */
607     name = "irc2.some.server";
608    
609     /*
610     * user: the user@host mask that is allowed to set klines. If this is
611     * not specified, all users on the server above will be allowed to set
612     * a remote kline.
613     */
614     user = "oper@my.host.is.spoofed";
615    
616     /*
617     * type: list of what to share, options are as follows:
618 michael 1301 * dline - allow oper/server to dline
619     * undline - allow oper/server to undline
620 michael 1336 * kline - allow oper/server to kline
621     * unkline - allow oper/server to unkline
622     * xline - allow oper/server to xline
623     * unxline - allow oper/server to unxline
624     * resv - allow oper/server to resv
625     * unresv - allow oper/server to unresv
626     * locops - allow oper/server to locops - only used for servers that cluster
627     * all - allow oper/server to do all of the above (default)
628 adx 30 */
629     type = kline, unkline, resv;
630     };
631    
632 michael 583 /*
633 michael 1229 * kill {}: users that are not allowed to connect
634 adx 30 * Oper issued klines will be added to the specified kline config
635     */
636     kill {
637     user = "bad@*.hacked.edu";
638     reason = "Obviously hacked account";
639     };
640    
641     kill {
642 michael 951 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
643    
644     /*
645     * NOTE: You have to set type=regex; when using a regular expression
646     * based user entry
647     */
648 adx 30 type = regex;
649     };
650    
651 michael 583 /*
652     * deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
653 adx 30 * Oper issued dlines will be added to the specified dline config
654     */
655     deny {
656     ip = "10.0.1.0/24";
657     reason = "Reconnecting vhosted bots";
658     };
659    
660 michael 583 /*
661 michael 1229 * exempt {}: IPs that are exempt from deny {} and Dlines.
662 adx 30 *
663 michael 584 * EFnet Note: We really suggest to enable general::stats_e_disabled
664     * if you plan to exempt EFnet server IPs you don't want to show to
665     * other operators and/or administrators through "STATS e".
666 adx 30 */
667     exempt {
668     ip = "192.168.0.0/16";
669     };
670    
671 michael 583 /*
672 michael 1229 * resv {}: nicks and channels users may not use/join
673 michael 583 */
674 adx 30 resv {
675     /* reason: the reason for the proceeding resv's */
676     reason = "There are no services on this network";
677    
678     /* resv: the nicks and channels users may not join/use */
679     nick = "nickserv";
680     nick = "chanserv";
681     nick = "operserv";
682     nick = "JUPES";
683     nick = "JUPE";
684     nick = "CH?NF?X"; # CHANFIX (services.int)
685    
686     /* These are totally optional, but may be a good idea */
687     nick = "oper";
688     nick = "ircop";
689     nick = "op";
690     nick = "ident";
691     nick = "pass";
692     channel = "#jupedchan";
693    
694     /* resv: wildcard masks are also supported in nicks only */
695     reason = "Clone bots";
696     nick = "clone*";
697     };
698    
699 michael 583 /*
700     * gecos {}: The X: replacement, used for banning users based on
701     * their "realname".
702 adx 30 */
703     gecos {
704     name = "*sex*";
705     reason = "Possible spambot";
706     };
707    
708     gecos {
709     name = "sub7server";
710     reason = "Trojan drone";
711     };
712    
713     gecos {
714     name = "*http*";
715     reason = "Spambot";
716     };
717    
718     gecos {
719     name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
720 michael 951
721     /*
722     * NOTE: You have to set type=regex; when using a regular expression
723     * based name entry
724     */
725 adx 30 type = regex;
726     };
727    
728     /*
729 michael 583 * channel {}: The channel block contains options pertaining to channels
730 adx 30 */
731     channel {
732 michael 56 /*
733 michael 632 * disable_fake_channels: this option, if set to 'yes', will
734     * disallow clients to create or join channels that have one
735     * of the following ASCII characters in their name:
736     *
737     * 2 | bold
738     * 3 | mirc color
739 michael 639 * 15 | plain text
740 michael 632 * 22 | reverse
741     * 31 | underline
742     * 160 | non-breaking space
743     */
744     disable_fake_channels = yes;
745    
746     /*
747 michael 56 * restrict_channels: reverse channel RESVs logic, only reserved
748     * channels are allowed
749     */
750     restrict_channels = no;
751 adx 30
752     /*
753     * disable_local_channels: prevent users from joining &channels.
754     */
755     disable_local_channels = no;
756    
757     /*
758     * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
759     * that can join a +i channel without an invite.
760     */
761     use_invex = yes;
762    
763     /*
764     * use_except: Enable/disable channel mode +e, a n!u@h list of masks
765     * that can join a channel through a ban (+b).
766     */
767     use_except = yes;
768    
769     /*
770     * use_knock: Allows users to request an invite to a channel that
771     * is locked somehow (+ikl). If the channel is +p or you are banned
772     * the knock will not be sent.
773     *
774     * EFnet Note: This seems to be used mostly by European servers
775     * and not North American ones.
776 michael 583 * Please feel free to disable this if you do not
777     * want to run channel knock.
778 adx 30 * channel knock allows an user to "/quote knock #channel"
779 michael 583 * to ask for an invite. It is typically used in eu-efnet
780 adx 30 * to ask for an invite to #eu-opers.
781 adx 201 * A user who is banned will not have their knock
782 michael 583 * sent to channel. It is paced, so knock will not
783 adx 30 * cause a flood.
784     */
785     use_knock = yes;
786    
787     /*
788     * knock_delay: The amount of time a user must wait between issuing
789     * the knock command.
790     */
791 michael 951 knock_delay = 5 minutes;
792 adx 30
793     /*
794     * knock_delay_channel: How often a knock to any specific channel
795     * is permitted, regardless of the user sending the knock.
796     */
797     knock_delay_channel = 1 minute;
798    
799 michael 583 /*
800     * burst_topicwho: enable sending of who set topic on topicburst
801     * default is yes
802     */
803 adx 201 burst_topicwho = yes;
804 adx 30
805 michael 583 /*
806     * max_chans_per_user: The maximum number of channels a user can
807     * join/be on.
808     */
809 adx 30 max_chans_per_user = 25;
810    
811     /* quiet_on_ban: stop banned people talking in channels. */
812     quiet_on_ban = yes;
813    
814     /* max_bans: maximum number of +b/e/I modes in a channel */
815     max_bans = 100;
816    
817     /*
818 adx 201 * how many joins in how many seconds constitute a flood, use 0 to
819     * disable. +b opers will be notified (changeable via /set)
820     */
821     join_flood_count = 16;
822     join_flood_time = 8 seconds;
823    
824     /*
825 adx 30 * splitcode: The ircd will now check splitmode every few seconds.
826     *
827     * Either split users or split servers can activate splitmode, but
828     * both conditions must be met for the ircd to deactivate splitmode.
829     *
830     * You may force splitmode to be permanent by /quote set splitmode on
831     */
832    
833     /*
834     * default_split_user_count: when the usercount is lower than this level,
835     * consider ourselves split. This must be set for automatic splitmode.
836     */
837 michael 1070 default_split_user_count = 20000;
838 adx 30
839     /*
840     * default_split_server_count: when the servercount is lower than this,
841     * consider ourselves split. This must be set for automatic splitmode.
842     */
843     default_split_server_count = 10;
844    
845 michael 959 /* no_create_on_split: disallow users creating channels on split. */
846 adx 30 no_create_on_split = yes;
847    
848 michael 959 /* no_join_on_split: disallow users joining channels at all on a split. */
849 adx 30 no_join_on_split = no;
850     };
851    
852     /*
853 michael 583 * serverhide {}: The serverhide block contains the options regarding
854     * serverhiding
855 adx 30 */
856     serverhide {
857     /*
858     * flatten_links: this option will show all servers in /links appear
859     * that they are linked to this current server
860     *
861     * EFnet Note: While this is not a requirement on EFnet, it
862     * may be a good idea. Except, it's useless
863     * unless the entire net runs it.
864     */
865 michael 951 flatten_links = no;
866 adx 30
867     /*
868     * links_delay: how often to update the links file when it is
869     * flattened.
870     */
871     links_delay = 5 minutes;
872    
873     /*
874     * hidden: hide this server from a /links output on servers that
875 michael 583 * support it. This allows hub servers to be hidden etc.
876 adx 30 */
877     hidden = no;
878    
879     /*
880     * disable_hidden: prevent servers hiding themselves from a
881     * /links output.
882     */
883     disable_hidden = no;
884    
885     /*
886     * hide_servers: hide remote servernames everywhere and instead use
887     * hidden_name and network_desc.
888     */
889     hide_servers = no;
890    
891     /*
892     * Use this as the servername users see if hide_servers = yes.
893     */
894 michael 583 hidden_name = "*.hidden.com";
895 adx 30
896     /*
897 michael 951 * hide_server_ips: If this is disabled, opers will be unable to see
898     * servers ips and will be shown a masked ip, admins will be shown the
899     * real ip.
900 adx 30 *
901 michael 951 * If this is enabled, nobody can see a servers ip. *This is a kludge*,
902     * it has the side effect of hiding the ips everywhere, including
903     * logfiles.
904 adx 30 *
905     * We recommend you leave this disabled, and just take care with who you
906     * give admin=yes; to.
907     */
908     hide_server_ips = yes;
909     };
910    
911     /*
912 michael 583 * general {}: The general block contains many of the options that were once
913     * compiled in options in config.h. The general block is read at start time.
914 adx 30 */
915     general {
916 michael 951 /* max_watch: maximum WATCH entries a client can have. */
917 michael 1070 max_watch = 60;
918 michael 876
919 adx 30 /*
920     * gline_min_cidr: the minimum required length of a CIDR bitmask
921     * for IPv4 based glines
922     */
923     gline_min_cidr = 16;
924    
925     /*
926     * gline_min_cidr6: the minimum required length of a CIDR bitmask
927     * for IPv6 based glines
928     */
929     gline_min_cidr6 = 48;
930    
931     /*
932     * Whether to automatically set mode +i on connecting users.
933     */
934     invisible_on_connect = yes;
935    
936     /*
937     * Show "actually using host <ip>" on /whois when possible.
938     */
939     use_whois_actually = yes;
940    
941     /*
942     * Max time from the nickname change that still causes KILL
943 michael 1074 * automatically to switch for the current nick of that user.
944 adx 30 */
945 michael 1074 kill_chase_time_limit = 90 seconds;
946 michael 1303
947 adx 30 /*
948 michael 951 * If hide_spoof_ips is disabled, opers will be allowed to see the real
949     * IP of spoofed users in /trace etc. If this is defined they will be
950     * shown a masked IP.
951 adx 30 */
952     hide_spoof_ips = yes;
953    
954     /*
955 michael 583 * Ignore bogus timestamps from other servers. Yes, this will desync
956 adx 30 * the network, but it will allow chanops to resync with a valid non TS 0
957     *
958     * This should be enabled network wide, or not at all.
959     */
960     ignore_bogus_ts = no;
961    
962     /*
963     * disable_auth: completely disable ident lookups; if you enable this,
964     * be careful of what you set need_ident to in your auth {} blocks
965     */
966     disable_auth = no;
967    
968     /* disable_remote_commands: disable users doing commands on remote servers */
969     disable_remote_commands = no;
970    
971     /*
972 michael 583 * tkline_expire_notices: enables or disables temporary kline/xline
973     * expire notices.
974 adx 30 */
975     tkline_expire_notices = no;
976    
977     /*
978     * default_floodcount: the default value of floodcount that is configurable
979     * via /quote set floodcount. This is the amount of lines a user
980     * may send to any other user/channel in one second.
981     */
982     default_floodcount = 10;
983    
984     /*
985     * failed_oper_notice: send a notice to all opers on the server when
986     * someone tries to OPER and uses the wrong password, host or ident.
987     */
988     failed_oper_notice = yes;
989    
990     /*
991     * dots_in_ident: the amount of '.' characters permitted in an ident
992     * reply before the user is rejected.
993     */
994 michael 951 dots_in_ident = 2;
995 adx 30
996     /*
997     * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
998     * placed via the server. klines hand placed are exempt from limits.
999     * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1000     */
1001     min_nonwildcard = 3;
1002    
1003     /*
1004     * min_nonwildcard_simple: the minimum non wildcard characters in
1005     * gecos bans. wildcard chars: '*' '?' '#'
1006     */
1007     min_nonwildcard_simple = 3;
1008    
1009     /* max_accept: maximum allowed /accept's for +g usermode */
1010     max_accept = 20;
1011    
1012     /* anti_nick_flood: enable the nickflood control code */
1013     anti_nick_flood = yes;
1014    
1015     /* nick flood: the nick changes allowed in the specified period */
1016     max_nick_time = 20 seconds;
1017     max_nick_changes = 5;
1018    
1019     /*
1020     * anti_spam_exit_message_time: the minimum time a user must be connected
1021     * before custom quit messages are allowed.
1022     */
1023     anti_spam_exit_message_time = 5 minutes;
1024    
1025     /*
1026     * ts delta: the time delta allowed between server clocks before
1027     * a warning is given, or before the link is dropped. all servers
1028     * should run ntpdate/rdate to keep clocks in sync
1029     */
1030     ts_warn_delta = 30 seconds;
1031     ts_max_delta = 5 minutes;
1032    
1033     /*
1034     * kline_with_reason: show the user the reason why they are k/d/glined
1035     * on exit. May give away who set k/dline when set via tcm.
1036     */
1037     kline_with_reason = yes;
1038    
1039     /*
1040     * kline_reason: show this message to users on channel
1041     * instead of the oper reason.
1042     */
1043     kline_reason = "Connection closed";
1044    
1045 michael 583 /*
1046     * reject_hold_time: wait this amount of time before disconnecting
1047     * a rejected client. Use 0 to disable.
1048     */
1049     reject_hold_time = 30 seconds;
1050 adx 30
1051     /*
1052     * warn_no_nline: warn opers about servers that try to connect but
1053     * we don't have a connect {} block for. Twits with misconfigured
1054     * servers can get really annoying with this enabled.
1055     */
1056     warn_no_nline = yes;
1057    
1058 michael 584 /*
1059     * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1060     * operators and administrators. Doing so is a good idea in case
1061     * there are any exempted (exempt{}) server IPs you don't want to
1062     * see leaked.
1063     */
1064     stats_e_disabled = no;
1065    
1066 adx 30 /* stats_o_oper only: make stats o (opers) oper only */
1067     stats_o_oper_only = yes;
1068    
1069     /* stats_P_oper_only: make stats P (ports) oper only */
1070     stats_P_oper_only = yes;
1071    
1072     /*
1073     * stats i oper only: make stats i (auth {}) oper only. set to:
1074     * yes: show users no auth blocks, made oper only.
1075     * masked: show users first matching auth block
1076     * no: show users all auth blocks.
1077     */
1078     stats_i_oper_only = yes;
1079    
1080     /*
1081     * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1082     * yes: show users no auth blocks, made oper only
1083     * masked: show users first matching auth block
1084     * no: show users all auth blocks.
1085     */
1086     stats_k_oper_only = yes;
1087 michael 583
1088 adx 30 /*
1089     * caller_id_wait: time between notifying a +g user that somebody
1090     * is messaging them.
1091     */
1092     caller_id_wait = 1 minute;
1093    
1094     /*
1095 michael 56 * opers_bypass_callerid: allows operators to bypass +g and message
1096     * anyone who has it set (useful if you use services).
1097     */
1098     opers_bypass_callerid = no;
1099    
1100     /*
1101 adx 30 * pace_wait_simple: time between use of less intensive commands
1102 adx 269 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1103 adx 30 */
1104     pace_wait_simple = 1 second;
1105    
1106     /*
1107     * pace_wait: time between more intensive commands
1108 adx 269 * (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1109 adx 30 */
1110     pace_wait = 10 seconds;
1111    
1112     /*
1113     * short_motd: send clients a notice telling them to read the motd
1114     * instead of forcing a motd to clients who may simply ignore it.
1115     */
1116     short_motd = no;
1117    
1118     /*
1119     * ping_cookie: require clients to respond exactly to a ping command,
1120     * can help block certain types of drones and FTP PASV mode spoofing.
1121     */
1122     ping_cookie = no;
1123    
1124     /* no_oper_flood: increase flood limits for opers. */
1125     no_oper_flood = yes;
1126    
1127     /*
1128     * true_no_oper_flood: completely eliminate flood limits for opers
1129     * and for clients with can_flood = yes in their auth {} blocks
1130     */
1131     true_no_oper_flood = yes;
1132    
1133     /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1134     oper_pass_resv = yes;
1135    
1136     /* REMOVE ME. The following line checks you've been reading. */
1137     havent_read_conf = 1;
1138    
1139     /*
1140     * max_targets: the maximum amount of targets in a single
1141     * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1142     */
1143     max_targets = 4;
1144    
1145     /*
1146     * client_flood: maximum amount of data in a clients queue before
1147     * they are dropped for flooding.
1148     */
1149     client_flood = 2560 bytes;
1150    
1151     /*
1152     * message_locale: the default message locale
1153     * Use "standard" for the compiled in defaults.
1154     * To install the translated messages, go into messages/ in the
1155     * source directory and run `make install'.
1156     */
1157     message_locale = "standard";
1158    
1159     /*
1160     * usermodes configurable: a list of usermodes for the options below
1161     *
1162     * +b - bots - See bot and drone flooding notices
1163     * +c - cconn - Client connection/quit notices
1164 michael 959 * +C - cconn_full - Client connection/quit notices full
1165 adx 30 * +D - deaf - Don't receive channel messages
1166     * +d - debug - See debugging notices
1167     * +f - full - See I: line full notices
1168     * +G - softcallerid - Server Side Ignore for users not on your channels
1169     * +g - callerid - Server Side Ignore (for privmsgs etc)
1170 michael 1294 * +H - hidden - Hides operator status to other users
1171 adx 30 * +i - invisible - Not shown in NAMES or WHO unless you share a
1172     * a channel
1173 michael 1290 * +j - rej - See rejected client notices
1174 adx 30 * +k - skill - See server generated KILL messages
1175     * +l - locops - See LOCOPS messages
1176     * +n - nchange - See client nick changes
1177     * +s - servnotice - See general server notices
1178     * +u - unauth - See unauthorized client notices
1179     * +w - wallop - See server generated WALLOPS
1180     * +x - external - See remote server connection and split notices
1181     * +y - spy - See LINKS, STATS, TRACE notices etc.
1182     * +z - operwall - See oper generated WALLOPS
1183     */
1184 michael 583
1185 adx 30 /* oper_only_umodes: usermodes only opers may set */
1186 michael 1294 oper_only_umodes = bots, cconn, cconn_full, debug, full, hidden, skill,
1187 db 853 nchange, rej, spy, external, operwall,
1188     locops, unauth;
1189 adx 30
1190     /* oper_umodes: default usermodes opers get when they /oper */
1191 adx 264 oper_umodes = bots, locops, servnotice, operwall, wallop;
1192 adx 30
1193     /*
1194     * use_egd: if your system does not have *random devices yet you
1195     * want to use OpenSSL and encrypted links, enable this. Beware -
1196     * EGD is *very* CPU intensive when gathering data for its pool
1197     */
1198     # use_egd = yes;
1199    
1200     /*
1201     * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1202     * which automatically finds the path.
1203     */
1204     # egdpool_path = "/var/run/egd-pool";
1205    
1206     /*
1207     * throttle_time: the minimum amount of time between connections from
1208     * the same ip. exempt {} blocks are excluded from this throttling.
1209     * Offers protection against flooders who reconnect quickly.
1210     * Set to 0 to disable.
1211     */
1212     throttle_time = 0;
1213     };
1214    
1215     glines {
1216     /*
1217     * EFnet Note: This feature is required for European EFnet servers
1218     * and is used by several North American servers. As
1219     * such, it has been left on by default. If you
1220     * do not want your server to participate in G:Lines
1221     * you should disable this.
1222     */
1223    
1224     /* enable: enable glines, network wide temp klines */
1225     enable = yes;
1226    
1227 michael 583 /*
1228     * duration: the amount of time a gline will remain on your
1229     * server before expiring
1230     */
1231 adx 30 duration = 1 day;
1232    
1233 michael 583 /*
1234 michael 1247 * log: which types of rules you want to log when triggered
1235 michael 583 * (choose reject or block)
1236     */
1237 michael 1247 log = reject, block;
1238 adx 30
1239     /*
1240 michael 583 * NOTE: gline ACLs can cause a desync of glines throughout the
1241     * network, meaning some servers may have a gline triggered, and
1242     * others may not. Also, you only need insert rules for glines
1243     * that you want to block and/or reject. If you want to accept and
1244     * propagate the gline, do NOT put a rule for it.
1245 adx 30 */
1246    
1247     /* user@host for rule to apply to */
1248     user = "god@I.still.hate.packets";
1249     /* server for rule to apply to */
1250     name = "hades.arpa";
1251    
1252     /*
1253     * action: action to take when a matching gline is found. options are:
1254 michael 1336 * reject - do not apply the gline locally
1255     * block - do not propagate the gline
1256 adx 30 */
1257     action = reject, block;
1258    
1259     user = "god@*";
1260     name = "*";
1261     action = block;
1262     };
1263    
1264     modules {
1265     /*
1266 michael 951 * path: other paths to search for modules specified below
1267 adx 30 * and in /modload.
1268     */
1269 michael 1070 path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1270     path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1271 adx 30
1272     /* module: the name of a module to load on startup/rehash */
1273 michael 1070 #module = "some_module.la";
1274 adx 30 };
1275 michael 1247
1276     /*
1277     * log {}: contains information about logfiles.
1278     */
1279     log {
1280     /* Do you want to enable logging to ircd.log? */
1281     use_logging = yes;
1282    
1283     file {
1284     type = oper;
1285     name = "/home/ircd/var/log/oper.log";
1286 michael 1250 size = unlimited;
1287 michael 1247 };
1288    
1289     file {
1290     type = user;
1291 michael 1249 name = "/home/ircd/var/log/user.log";
1292 michael 1247 size = 50 megabytes;
1293     };
1294    
1295     file {
1296     type = kill;
1297     name = "/home/ircd/var/log/kill.log";
1298     size = 50 megabytes;
1299     };
1300    
1301     file {
1302     type = kline;
1303     name = "/home/ircd/var/log/kline.log";
1304     size = 50 megabytes;
1305     };
1306    
1307     file {
1308     type = dline;
1309     name = "/home/ircd/var/log/dline.log";
1310     size = 50 megabytes;
1311     };
1312    
1313     file {
1314     type = gline;
1315     name = "/home/ircd/var/log/gline.log";
1316     size = 50 megabytes;
1317     };
1318    
1319     file {
1320     type = debug;
1321     name = "/home/ircd/var/log/debug.log";
1322     size = 50 megabytes;
1323     };
1324 michael 1249 };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28