/[svn]/ircd-hybrid-8/doc/example.conf
ViewVC logotype

Annotation of /ircd-hybrid-8/doc/example.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1533 - (hide annotations)
Sun Sep 23 13:04:45 2012 UTC (8 years, 5 months ago) by michael
File size: 34134 byte(s)
- A server's description can again include the '[' and ']' characters

1 michael 1336 /* doc/example.conf - ircd-hybrid-8 Example configuration file
2 michael 1334 * Copyright (C) 2000-2012 Hybrid Development Team
3 db 897 *
4     * Written by ejb, wcampbel, db, leeh and others
5     * Other example configurations can be found in the source dir under
6 michael 1524 * doc/.
7 db 897 *
8     * $Id$
9     */
10    
11     /* IMPORTANT NOTES:
12     *
13     * auth {} blocks MUST be specified in order of precedence. The first one
14     * that matches a user will be used. So place spoofs first, then specials,
15     * then general access.
16     *
17     * Shell style (#), C++ style (//) and C style comments are supported.
18     *
19     * Files may be included by either:
20     * .include "filename"
21     * .include <filename>
22     *
23     * Times/durations are written as:
24     * 12 hours 30 minutes 1 second
25     *
26     * Valid units of time:
27     * month, week, day, hour, minute, second
28     *
29     * Valid units of size:
30     * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31     *
32     * Sizes and times may be singular or plural.
33     */
34    
35     /* EFNET NOTE:
36     *
37     * This config file is NOT suitable for EFNet. EFNet admins should use
38     * example.efnet.conf
39     */
40    
41     /*
42 michael 1336 * serverinfo {}: contains information about the server
43 db 897 */
44     serverinfo {
45     /*
46 michael 1070 * name: the name of this server. This cannot be changed at runtime.
47 db 897 */
48     name = "hades.arpa";
49    
50     /*
51     * sid: a server's unique ID. This is three characters long and must
52     * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
53     * a digit, followed by 2 alpha-numerical letters.
54     * NOTE: The letters must be capitalized. This cannot be changed at runtime.
55     */
56     sid = "_CHANGE_ME_";
57    
58     /*
59 michael 1533 * description: the description of the server.
60 db 897 */
61     description = "hybrid-7 test server";
62    
63     /*
64     * network info: the name and description of the network this server
65     * is on. Shown in the 005 reply and used with serverhiding.
66     */
67     network_name = "MyNet";
68     network_desc = "This is My Network";
69    
70     /*
71     * hub: allow this server to act as a hub and have multiple servers
72     * connected to it.
73     */
74     hub = no;
75    
76     /*
77     * vhost: the IP to bind to when we connect outward to ipv4 servers.
78 michael 959 * This should be an ipv4 IP only, or "*" for INADDR_ANY.
79 db 897 */
80     #vhost = "192.169.0.1";
81    
82     /*
83     * vhost6: the IP to bind to when we connect outward to ipv6 servers.
84 michael 959 * This should be an ipv6 IP only, or "*" for INADDR_ANY.
85 db 897 */
86     #vhost6 = "3ffe:80e8:546::2";
87    
88     /* max_clients: the maximum number of clients allowed to connect */
89     max_clients = 512;
90    
91     /*
92 michael 951 * rsa_private_key_file: the path to the file containing our
93     * rsa key for cryptlink.
94 db 897 *
95     * Example command to store a 2048 bit RSA keypair in
96     * rsa.key, and the public key in rsa.pub:
97     *
98 michael 1229 * openssl genrsa -out rsa.key 2048
99 db 897 * openssl rsa -in rsa.key -pubout -out rsa.pub
100     * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
101     * chmod 0600 rsa.key
102     * chmod 0644 rsa.pub
103     */
104     #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
105    
106     /*
107 michael 951 * ssl_certificate_file: the path to the file containing our
108 michael 1070 * ssl certificate for encrypted client connection.
109 db 897 *
110     * This assumes your private RSA key is stored in rsa.key. You
111     * MUST have an RSA key in order to generate the certificate
112     *
113     * openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
114     *
115     * See http://www.openssl.org/docs/HOWTO/certificates.txt
116     *
117     * Please use the following values when generating the cert
118     *
119     * Organization Name: Network Name
120     * Organization Unit Name: changme.someirc.net
121     * Common Name: irc.someirc.net
122     * E-mail: you@domain.com
123     */
124     #ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
125 michael 967
126 michael 1351 /*
127     * ssl_dh_param_file:
128     *
129     * Path to the PEM encoded Diffie-Hellman parameter file.
130     * DH parameters are strictly required when using ciphers
131     * with EDH (ephemeral Diffie-Hellman) key exchange.
132     *
133     * A DH parameter file can be created by running:
134     *
135     * openssl dhparam -out dhparam.pem 1024
136     *
137 michael 1523 * Prime size must be at least 1024 bits. Further information
138     * regarding specific OpenSSL dhparam command-line options
139     * can be found in the OpenSSL manual.
140 michael 1351 */
141 michael 1306 #ssl_dh_param_file = "/usr/local/ircd/etc/dhparam.pem";
142    
143 michael 967 /*
144 michael 1306 * ssl_cipher_list:
145     *
146 michael 1524 * List of ciphers that are supported by _this_ server. Can be used to
147     * enforce specific ciphers for incoming SSL/TLS connections.
148     * If a client (which also includes incoming server connections) isn't
149     * capable of any cipher listed below, the connection will simply be
150     * rejected.
151 michael 1306 * A list of supported ciphers can be obtained by running:
152     *
153     * openssl ciphers -ssl3 -tls1 -v
154     *
155 michael 1524 * Multiple ciphers are separated by colons. The order of preference is
156     * from left to right.
157 michael 1306 */
158     #ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
159    
160     /*
161 michael 1351 * ssl_server_method:
162     * ssl_client_method:
163     *
164 michael 1412 * SSL/TLS methods we provide for incoming (server method) and
165     * outgoing (client method) SSL/TLS connections.
166 michael 967 * This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
167     */
168 michael 1316 #ssl_server_method = tlsv1, sslv3;
169     #ssl_client_method = tlsv1;
170 db 897 };
171    
172     /*
173 michael 1229 * admin {}: contains admin information about the server
174 db 897 */
175     admin {
176     name = "Smurf target";
177     description = "Main Server Administrator";
178     email = "<syn@packets.r.us>";
179     };
180    
181     /*
182 michael 1229 * class {}: contains information about classes for users
183 db 897 */
184     class {
185 michael 1522 /* name: the name of the class */
186 db 897 name = "users";
187    
188     /*
189     * ping_time: how often a client must reply to a PING from the
190     * server before they are dropped.
191     */
192     ping_time = 90 seconds;
193    
194     /*
195     * number_per_ip: how many local users are allowed to connect
196     * from one IP (optional)
197     */
198     number_per_ip = 2;
199    
200     /*
201     * max_local: how many local users are allowed to connect
202     * from one ident@host (optional)
203     */
204     max_local = 2;
205    
206     /*
207     * max_global: network-wide limit of users per ident@host (optional)
208     */
209     max_global = 10;
210    
211     /*
212     * max_number: the maximum number of users allowed in this class (optional)
213     */
214     max_number = 100;
215    
216     /*
217     * the following lines are optional and allow you to define
218     * how many users can connect from one /NN subnet
219     */
220     cidr_bitlen_ipv4 = 24;
221     cidr_bitlen_ipv6 = 120;
222     number_per_cidr = 16;
223    
224     /*
225     * sendq: the amount of data allowed in a clients queue before
226     * they are dropped.
227     */
228     sendq = 100 kbytes;
229 michael 1516
230     /*
231     * recvq: maximum amount of data in a clients queue before they
232     * are dropped for flooding. Defaults to 2560 if the chosen
233     * value isn't within the range of 512 to 8000.
234     */
235     recvq = 2560 bytes;
236 db 897 };
237    
238     class {
239     name = "opers";
240     ping_time = 90 seconds;
241     number_per_ip = 10;
242     max_number = 100;
243 michael 1428 sendq = 100 kbytes;
244 db 897 };
245    
246     class {
247     name = "server";
248     ping_time = 90 seconds;
249    
250     /*
251     * ping_warning: how fast a server must reply to a PING before
252     * a warning to opers is generated.
253     */
254     ping_warning = 15 seconds;
255    
256     /*
257     * connectfreq: only used in server classes. Specifies the delay
258     * between autoconnecting to servers.
259     */
260     connectfreq = 5 minutes;
261    
262     /* max number: the amount of servers to autoconnect to */
263     max_number = 1;
264    
265     /* sendq: servers need a higher sendq as they send more data */
266     sendq = 2 megabytes;
267     };
268    
269     /*
270 michael 1229 * listen {}: contains information about the ports ircd listens on
271 db 897 */
272     listen {
273     /*
274     * port: the specific port to listen on. If no host is specified
275     * before, it will listen on all available IPs.
276     *
277     * Ports are separated via a comma, a range may be specified using ".."
278     */
279    
280     /* port: listen on all available IPs, ports 6665 to 6669 */
281     port = 6665 .. 6669;
282    
283     /*
284     * Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
285     * unless you are an administrator.
286     *
287     * NOTE: The "flags" directive has to come before "port". Always!
288 michael 951 *
289     * Currently available flags are:
290     *
291     * ssl - Port is for SSL client connections only
292     * server - Only server connections are permitted
293 michael 1229 * hidden - Port is hidden from /stats P, unless you're an admin
294 db 897 */
295     flags = hidden, ssl;
296     host = "192.168.0.1";
297     port = 6697;
298    
299     /*
300     * host: set a specific IP/host the ports after the line will listen
301     * on. This may be ipv4 or ipv6.
302     */
303     host = "1.2.3.4";
304     port = 7000, 7001;
305    
306     host = "3ffe:1234:a:b:c::d";
307     port = 7002;
308     };
309    
310     /*
311 michael 1229 * auth {}: allow users to connect to the ircd
312 db 897 */
313     auth {
314     /*
315     * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
316     * lines are permitted per auth block.
317     */
318     user = "*@172.16.0.0/12";
319     user = "*test@123D:B567:*";
320    
321     /* password: an optional password that is required to use this block */
322     password = "letmein";
323    
324     /*
325     * encrypted: controls whether the auth password above has been
326     * encrypted.
327     */
328     encrypted = yes;
329    
330     /*
331     * spoof: fake the users host to this. This is free-form,
332     * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
333     */
334     spoof = "I.still.hate.packets";
335    
336     /* class: the class the user is placed in */
337     class = "opers";
338    
339     /*
340 michael 1229 * need_password - don't allow users who haven't supplied the correct
341     * password to connect using another auth{} block
342     * ('&' prefix on /stats I if disabled)
343     * need_ident - require the user to have identd to connect ('+' prefix on /stats I)
344     * spoof_notice - enable spoofing notification to admins
345     * exceed_limit - allow a user to exceed class limits ('>' prefix on /stats I)
346     * kline_exempt - exempt this user from k/glines ('^' prefix on /stats I)
347     * gline_exempt - exempt this user from glines ('_' prefix on /stats I)
348     * resv_exempt - exempt this user from resvs ('$' prefix on /stats I)
349     * no_tilde - remove ~ from a user with no ident ('-' prefix on /stats I)
350     * can_flood - allow this user to exceed flood limits ('|' prefix on /stats I)
351 db 897 */
352     flags = need_password, spoof_notice, exceed_limit, kline_exempt,
353 michael 1176 gline_exempt, resv_exempt, no_tilde, can_flood;
354 db 897 };
355    
356     auth {
357     /*
358     * redirect: the server and port to redirect a user to. A user does
359     * not have to obey the redirection, the ircd just suggests an alternative
360     * server for them.
361     */
362     redirserv = "this.is.not.a.real.server";
363     redirport = 6667;
364    
365     user = "*.server";
366    
367     /* class: a class is required even though it is not used */
368     class = "users";
369     };
370    
371     auth {
372     user = "*@*";
373     class = "users";
374     flags = need_ident;
375     };
376    
377     /*
378 michael 1229 * operator {}: defines ircd operators
379 db 897 *
380     * ircd-hybrid no longer supports local operators, privileges are
381     * controlled via flags.
382     */
383     operator {
384     /* name: the name of the oper */
385     name = "god";
386    
387     /*
388 michael 1285 * user: the user@host required for this operator. Multiple
389 michael 1336 * user="" lines are supported.
390 db 897 */
391 michael 1285 user = "*god@192.168.0.0/16";
392     user = "*@127.0.0.0/8";
393 db 897
394     /*
395     * password: the password required to oper. By default this will
396 michael 1070 * need to be encrypted by using the provided mkpasswd tool.
397     * Several password hash algorithms are available depending
398     * on your system's crypt() implementation. For example, a modern
399     * glibc already has support for SHA-256/512, and MD5 encryption
400     * algorithms.
401 db 897 */
402 michael 1070 password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
403 db 897
404     /*
405     * encrypted: controls whether the oper password above has been
406 michael 1070 * encrypted.
407 db 897 */
408     encrypted = yes;
409    
410     /*
411     * rsa_public_key_file: the public key for this oper when using Challenge.
412     * A password should not be defined when this is used, see
413     * doc/challenge.txt for more information.
414     */
415     # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
416    
417     /* class: the class the oper joins when they successfully /oper */
418     class = "opers";
419    
420     /*
421     * umodes: default usermodes opers get when they /oper. If defined,
422     * it will override oper_umodes settings in general {}.
423     * Available usermodes:
424     *
425     * +b - bots - See bot and drone flooding notices
426     * +c - cconn - Client connection/quit notices
427 michael 951 * +C - cconn_full - Client connection/quit notices full
428 db 897 * +D - deaf - Don't receive channel messages
429     * +d - debug - See debugging notices
430 michael 1426 * +f - full - See auth{} block full notices
431 db 897 * +G - softcallerid - Server Side Ignore for users not on your channels
432     * +g - callerid - Server Side Ignore (for privmsgs etc)
433 michael 1294 * +H - hidden - Hides operator status to other users
434 db 897 * +i - invisible - Not shown in NAMES or WHO unless you share a
435     * a channel
436 michael 1290 * +j - rej - See rejected client notices
437 db 897 * +k - skill - See server generated KILL messages
438     * +l - locops - See LOCOPS messages
439     * +n - nchange - See client nick changes
440     * +s - servnotice - See general server notices
441     * +u - unauth - See unauthorized client notices
442     * +w - wallop - See server generated WALLOPS
443     * +x - external - See remote server connection and split notices
444     * +y - spy - See LINKS, STATS, TRACE notices etc.
445     * +z - operwall - See oper generated WALLOPS
446     */
447     # umodes = locops, servnotice, operwall, wallop;
448    
449     /*
450     * privileges: controls the activities and commands an oper is
451 michael 1228 * allowed to do on the server. All options default to no.
452 db 897 * Available options:
453     *
454 michael 1441 * module - allows MODULE
455 michael 1229 * global_kill - allows remote users to be /KILL'd
456     * remote - allows remote SQUIT and CONNECT
457     * remoteban - allows remote KLINE/UNKLINE
458 michael 1301 * dline - allows DLINE
459     * undline - allows UNDLINE
460     * kline - allows KILL and KLINE
461     * unkline - allows UNKLINE
462 michael 1229 * gline - allows GLINE
463     * xline - allows XLINE
464     * globops - allows GLOBOPS
465     * operwall - allows OPERWALL
466     * nick_changes - allows oper to see nickchanges via usermode +n
467     * rehash - allows oper to REHASH config
468     * die - allows DIE
469     * restart - allows RESTART
470 michael 1460 * set - allows SET
471 michael 1229 * admin - gives admin privileges. admins for example,
472     * may see the real IP addresses of servers.
473 db 897 */
474 michael 1228 flags = global_kill, remote, kline, unkline, xline, globops, restart,
475     die, rehash, nick_changes, admin, operwall, module;
476 db 897 };
477    
478 michael 1157 service {
479     name = "service.someserver";
480 michael 1302 name = "stats.someserver";
481 michael 1157 };
482    
483 db 897 /*
484 michael 1229 * connect {}: controls servers we connect to
485 db 897 */
486     connect {
487     /* name: the name of the server */
488     name = "irc.uplink.com";
489    
490     /*
491     * host: the host or IP to connect to. If a hostname is used it
492     * must match the reverse dns of the server.
493     */
494     host = "192.168.0.1";
495    
496     /*
497     * vhost: the IP to bind to when we connect outward to servers.
498     * serverinfo::vhost and serverinfo::vhost6 will be overridden
499     * by this directive.
500     */
501     vhost = "192.168.0.2";
502    
503     /*
504     * passwords: the passwords we send (OLD C:) and accept (OLD N:).
505     * The remote server will have these passwords reversed.
506     */
507     send_password = "password";
508     accept_password = "anotherpassword";
509    
510     /*
511     * encrypted: controls whether the accept_password above has been
512 michael 1070 * encrypted.
513 db 897 */
514     encrypted = no;
515    
516     /* port: the port to connect to this server on */
517     port = 6666;
518    
519     /*
520     * hub_mask: the mask of servers that this server may hub. Multiple
521     * entries are permitted
522     */
523     hub_mask = "*";
524    
525     /*
526     * leaf_mask: the mask of servers this server may not hub. Multiple
527     * entries are permitted. Useful for forbidding EU -> US -> EU routes.
528     */
529     # leaf_mask = "*.uk";
530    
531     /* class: the class this server is in */
532     class = "server";
533    
534 michael 1524 /*
535     * ssl_cipher_list:
536     *
537     * List of ciphers that the server we are connecting to must support.
538     * If the server isn't capable of any cipher listed below, the
539     * connection will simply be rejected.
540     * Can be used to enforce stronger ciphers, even though this option
541     * is not necessarily required to establish a SSL/TLS connection.
542     *
543     * Multiple ciphers are separated by colons. The order of preference
544     * is from left to right.
545     */
546 michael 1306 #ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";
547    
548 db 897 /*
549 michael 1229 * autoconn - controls whether we autoconnect to this server or not,
550     * dependent on class limits. By default, this is disabled.
551 michael 1303 * ssl - Initiates a TLS/SSL connection.
552 db 897 */
553 michael 1519 # flags = autoconn, ssl;
554 db 897 };
555    
556     connect {
557 michael 1285 name = "ipv6.some.server";
558 db 897 host = "3ffd:dead:beef::1";
559     send_password = "password";
560     accept_password = "password";
561     port = 6666;
562    
563     /*
564     * aftype: controls whether the connection uses "ipv4" or "ipv6".
565     * Default is ipv4.
566     */
567     aftype = ipv6;
568     class = "server";
569     };
570    
571     /*
572     * cluster {}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
573 michael 1229 * automatically
574 db 897 */
575     cluster {
576     /*
577     * name: the server to share with, this can take wildcards
578     *
579     * NOTE: only local actions will be clustered, meaning if
580     * the server receives a shared kline/unkline/etc, it
581     * will not be propagated to clustered servers.
582     *
583     * Remote servers are not necessarily required to accept
584     * clustered lines, they need a shared{} for *THIS* server
585     * in order to accept them.
586     */
587     name = "*.arpa";
588    
589     /*
590     * type: list of what to share, options are as follows:
591 michael 1301 * dline - share dlines
592     * undline - share undlines
593 michael 1336 * kline - share klines
594     * unkline - share unklines
595     * xline - share xlines
596     * unxline - share unxlines
597     * resv - share resvs
598     * unresv - share unresvs
599     * locops - share locops
600     * all - share all of the above (default)
601 db 897 */
602     type = kline, unkline, locops, xline, resv;
603     };
604    
605     /*
606 michael 1229 * shared {}: users that are allowed to remote kline
607 db 897 *
608     * NOTE: This can be effectively used for remote klines.
609     * Please note that there is no password authentication
610     * for users setting remote klines. You must also be
611     * /oper'd in order to issue a remote kline.
612     */
613     shared {
614     /*
615     * name: the server the user must be on to set klines. If this is not
616     * specified, the user will be allowed to kline from all servers.
617     */
618     name = "irc2.some.server";
619    
620     /*
621     * user: the user@host mask that is allowed to set klines. If this is
622     * not specified, all users on the server above will be allowed to set
623     * a remote kline.
624     */
625     user = "oper@my.host.is.spoofed";
626    
627     /*
628     * type: list of what to share, options are as follows:
629 michael 1301 * dline - allow oper/server to dline
630     * undline - allow oper/server to undline
631 michael 1336 * kline - allow oper/server to kline
632     * unkline - allow oper/server to unkline
633     * xline - allow oper/server to xline
634     * unxline - allow oper/server to unxline
635     * resv - allow oper/server to resv
636     * unresv - allow oper/server to unresv
637 db 897 * locops - allow oper/server to locops - only used for servers that cluster
638 michael 1336 * all - allow oper/server to do all of the above (default)
639 db 897 */
640     type = kline, unkline, resv;
641     };
642    
643     /*
644 michael 1229 * kill {}: users that are not allowed to connect
645 db 897 * Oper issued klines will be added to the specified kline config
646     */
647     kill {
648     user = "bad@*.hacked.edu";
649     reason = "Obviously hacked account";
650     };
651    
652     kill {
653 michael 951 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
654    
655     /*
656     * NOTE: You have to set type=regex; when using a regular expression
657     * based user entry
658     */
659 db 897 type = regex;
660     };
661    
662     /*
663     * deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
664     * Oper issued dlines will be added to the specified dline config
665     */
666     deny {
667     ip = "10.0.1.0/24";
668     reason = "Reconnecting vhosted bots";
669     };
670    
671     /*
672 michael 1229 * exempt {}: IPs that are exempt from deny {} and Dlines
673 db 897 */
674     exempt {
675     ip = "192.168.0.0/16";
676     };
677    
678     /*
679 michael 1229 * resv {}: nicks and channels users may not use/join
680 db 897 */
681     resv {
682     /* reason: the reason for the proceeding resv's */
683 michael 1157 reason = "Reserved for services";
684 db 897
685     /* resv: the nicks and channels users may not join/use */
686 michael 1217 nick = "Global";
687     nick = "DevNull";
688 michael 1475 nick = "BotServ";
689 michael 1217 nick = "Services";
690     nick = "StatServ";
691 michael 1475 nick = "HelpServ";
692 michael 1217 nick = "HostServ";
693 michael 1157 nick = "NickServ";
694     nick = "ChanServ";
695     nick = "MemoServ";
696     nick = "OperServ";
697 db 897 channel = "#services";
698    
699     /* resv: wildcard masks are also supported in nicks only */
700     reason = "Clone bots";
701     nick = "clone*";
702     };
703    
704     /*
705     * gecos {}: The X: replacement, used for banning users based on
706     * their "realname".
707     */
708     gecos {
709     name = "*sex*";
710     reason = "Possible spambot";
711     };
712    
713     gecos {
714     name = "sub7server";
715     reason = "Trojan drone";
716     };
717    
718     gecos {
719     name = "*http*";
720     reason = "Spambot";
721     };
722    
723     gecos {
724     name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
725 michael 951
726     /*
727     * NOTE: You have to set type=regex; when using a regular expression
728     * based name entry
729     */
730 db 897 type = regex;
731     };
732    
733     /*
734     * channel {}: The channel block contains options pertaining to channels
735     */
736     channel {
737     /*
738     * disable_fake_channels: this option, if set to 'yes', will
739     * disallow clients to create or join channels that have one
740     * of the following ASCII characters in their name:
741     *
742     * 2 | bold
743     * 3 | mirc color
744 michael 951 * 15 | plain text
745 db 897 * 22 | reverse
746 michael 1424 * 29 | italic
747 db 897 * 31 | underline
748     * 160 | non-breaking space
749     */
750     disable_fake_channels = yes;
751    
752     /*
753     * restrict_channels: reverse channel RESVs logic, only reserved
754     * channels are allowed
755     */
756     restrict_channels = no;
757    
758     /*
759     * knock_delay: The amount of time a user must wait between issuing
760     * the knock command.
761     */
762 michael 951 knock_delay = 5 minutes;
763 db 897
764     /*
765     * knock_delay_channel: How often a knock to any specific channel
766     * is permitted, regardless of the user sending the knock.
767     */
768     knock_delay_channel = 1 minute;
769    
770     /*
771     * max_chans_per_user: The maximum number of channels a user can
772     * join/be on.
773     */
774     max_chans_per_user = 25;
775    
776 michael 1432 /*
777     * max_chans_per_oper: The maximum number of channels an oper can
778     * join/be on.
779     */
780     max_chans_per_oper = 50;
781    
782 db 897 /* quiet_on_ban: stop banned people talking in channels. */
783     quiet_on_ban = yes;
784    
785     /* max_bans: maximum number of +b/e/I modes in a channel */
786 michael 1522 max_bans = 100;
787 db 897
788     /*
789     * how many joins in how many seconds constitute a flood, use 0 to
790     * disable. +b opers will be notified (changeable via /set)
791     */
792     join_flood_count = 16;
793     join_flood_time = 8 seconds;
794    
795     /*
796     * splitcode: The ircd will now check splitmode every few seconds.
797     *
798     * Either split users or split servers can activate splitmode, but
799     * both conditions must be met for the ircd to deactivate splitmode.
800     *
801     * You may force splitmode to be permanent by /quote set splitmode on
802     */
803    
804     /*
805     * default_split_user_count: when the usercount is lower than this level,
806     * consider ourselves split. This must be set for automatic splitmode.
807     */
808     default_split_user_count = 0;
809    
810     /*
811     * default_split_server_count: when the servercount is lower than this,
812     * consider ourselves split. This must be set for automatic splitmode.
813     */
814     default_split_server_count = 0;
815    
816 michael 959 /* no_create_on_split: disallow users creating channels on split. */
817 db 897 no_create_on_split = yes;
818    
819 michael 959 /* no_join_on_split: disallow users joining channels at all on a split. */
820 db 897 no_join_on_split = no;
821     };
822    
823     /*
824     * serverhide {}: The serverhide block contains the options regarding
825     * serverhiding
826     */
827     serverhide {
828     /*
829     * flatten_links: this option will show all servers in /links appear
830     * that they are linked to this current server
831     */
832     flatten_links = no;
833    
834     /*
835     * links_delay: how often to update the links file when it is
836     * flattened.
837     */
838     links_delay = 5 minutes;
839    
840     /*
841     * hidden: hide this server from a /links output on servers that
842     * support it. This allows hub servers to be hidden etc.
843     */
844     hidden = no;
845    
846     /*
847     * hide_servers: hide remote servernames everywhere and instead use
848     * hidden_name and network_desc.
849     */
850     hide_servers = no;
851    
852     /*
853     * Use this as the servername users see if hide_servers = yes.
854     */
855     hidden_name = "*.hidden.com";
856    
857     /*
858 michael 951 * hide_server_ips: If this is disabled, opers will be unable to see
859     * servers ips and will be shown a masked ip, admins will be shown the
860     * real ip.
861 db 897 *
862 michael 951 * If this is enabled, nobody can see a servers ip. *This is a kludge*,
863     * it has the side effect of hiding the ips everywhere, including
864     * logfiles.
865 db 897 *
866     * We recommend you leave this disabled, and just take care with who you
867     * give admin=yes; to.
868     */
869     hide_server_ips = no;
870     };
871    
872     /*
873     * general {}: The general block contains many of the options that were once
874     * compiled in options in config.h. The general block is read at start time.
875     */
876     general {
877 michael 1157 /* services_name: servername of nick/channel services */
878     services_name = "service.someserver";
879    
880 michael 951 /* max_watch: maximum WATCH entries a client can have. */
881 michael 1070 max_watch = 60;
882 db 897
883 michael 1459 /* gline_enable: enable glines, network wide temp klines */
884     gline_enable = yes;
885    
886 db 897 /*
887 michael 1459 * gline_duration: the amount of time a gline will remain on your
888     * server before expiring
889     */
890     gline_duration = 1 day;
891    
892     /*
893     * gline_request_duration: how long a pending G-line can be around.
894     * 10 minutes should be plenty
895     */
896     gline_request_duration = 10 minutes;
897    
898     /*
899 db 897 * gline_min_cidr: the minimum required length of a CIDR bitmask
900     * for IPv4 based glines
901     */
902     gline_min_cidr = 16;
903    
904     /*
905     * gline_min_cidr6: the minimum required length of a CIDR bitmask
906     * for IPv6 based glines
907     */
908     gline_min_cidr6 = 48;
909    
910     /*
911     * Whether to automatically set mode +i on connecting users.
912     */
913     invisible_on_connect = yes;
914    
915     /*
916     * Show "actually using host <ip>" on /whois when possible.
917     */
918     use_whois_actually = yes;
919    
920     /*
921     * Max time from the nickname change that still causes KILL
922 michael 1074 * automatically to switch for the current nick of that user.
923 db 897 */
924 michael 1074 kill_chase_time_limit = 90 seconds;
925 db 897
926     /*
927 michael 1228 * If hide_spoof_ips is disabled, opers will be allowed to see the real
928     * IP of spoofed users in /trace etc. If this is defined they will be
929     * shown a masked IP.
930 db 897 */
931     hide_spoof_ips = yes;
932    
933     /*
934     * Ignore bogus timestamps from other servers. Yes, this will desync
935     * the network, but it will allow chanops to resync with a valid non TS 0
936     *
937     * This should be enabled network wide, or not at all.
938     */
939     ignore_bogus_ts = no;
940    
941     /*
942     * disable_auth: completely disable ident lookups; if you enable this,
943     * be careful of what you set need_ident to in your auth {} blocks
944     */
945     disable_auth = no;
946    
947     /* disable_remote_commands: disable users doing commands on remote servers */
948     disable_remote_commands = no;
949    
950     /*
951     * tkline_expire_notices: enables or disables temporary kline/xline
952     * expire notices.
953     */
954     tkline_expire_notices = no;
955    
956     /*
957     * default_floodcount: the default value of floodcount that is configurable
958     * via /quote set floodcount. This is the amount of lines a user
959     * may send to any other user/channel in one second.
960     */
961     default_floodcount = 10;
962    
963     /*
964     * failed_oper_notice: send a notice to all opers on the server when
965     * someone tries to OPER and uses the wrong password, host or ident.
966     */
967     failed_oper_notice = yes;
968    
969     /*
970     * dots_in_ident: the amount of '.' characters permitted in an ident
971     * reply before the user is rejected.
972     */
973     dots_in_ident = 2;
974    
975     /*
976     * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
977     * placed via the server. klines hand placed are exempt from limits.
978     * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
979     */
980     min_nonwildcard = 4;
981    
982     /*
983     * min_nonwildcard_simple: the minimum non wildcard characters in
984     * gecos bans. wildcard chars: '*' '?' '#'
985     */
986     min_nonwildcard_simple = 3;
987    
988     /* max_accept: maximum allowed /accept's for +g usermode */
989     max_accept = 20;
990    
991     /* anti_nick_flood: enable the nickflood control code */
992     anti_nick_flood = yes;
993    
994     /* nick flood: the nick changes allowed in the specified period */
995     max_nick_time = 20 seconds;
996     max_nick_changes = 5;
997    
998     /*
999     * anti_spam_exit_message_time: the minimum time a user must be connected
1000     * before custom quit messages are allowed.
1001     */
1002     anti_spam_exit_message_time = 5 minutes;
1003    
1004     /*
1005     * ts delta: the time delta allowed between server clocks before
1006     * a warning is given, or before the link is dropped. all servers
1007     * should run ntpdate/rdate to keep clocks in sync
1008     */
1009     ts_warn_delta = 30 seconds;
1010     ts_max_delta = 5 minutes;
1011    
1012     /*
1013     * kline_with_reason: show the user the reason why they are k/d/glined
1014     * on exit. May give away who set k/dline when set via tcm.
1015     */
1016     kline_with_reason = yes;
1017    
1018     /*
1019     * kline_reason: show this message to users on channel
1020     * instead of the oper reason.
1021     */
1022     kline_reason = "Connection closed";
1023    
1024     /*
1025     * reject_hold_time: wait this amount of time before disconnecting
1026     * a rejected client. Use 0 to disable.
1027     */
1028     reject_hold_time = 0;
1029    
1030     /*
1031     * warn_no_nline: warn opers about servers that try to connect but
1032     * we don't have a connect {} block for. Twits with misconfigured
1033     * servers can get really annoying with this enabled.
1034     */
1035     warn_no_nline = yes;
1036    
1037     /*
1038     * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1039     * operators and administrators. Doing so is a good idea in case
1040     * there are any exempted (exempt{}) server IPs you don't want to
1041     * see leaked.
1042     */
1043     stats_e_disabled = no;
1044    
1045     /* stats_o_oper only: make stats o (opers) oper only */
1046     stats_o_oper_only = yes;
1047    
1048     /* stats_P_oper_only: make stats P (ports) oper only */
1049     stats_P_oper_only = yes;
1050    
1051     /*
1052     * stats i oper only: make stats i (auth {}) oper only. set to:
1053     * yes: show users no auth blocks, made oper only.
1054     * masked: show users first matching auth block
1055     * no: show users all auth blocks.
1056     */
1057     stats_i_oper_only = yes;
1058    
1059     /*
1060     * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1061     * yes: show users no auth blocks, made oper only
1062     * masked: show users first matching auth block
1063     * no: show users all auth blocks.
1064     */
1065     stats_k_oper_only = yes;
1066    
1067     /*
1068     * caller_id_wait: time between notifying a +g user that somebody
1069     * is messaging them.
1070     */
1071     caller_id_wait = 1 minute;
1072    
1073     /*
1074     * opers_bypass_callerid: allows operators to bypass +g and message
1075     * anyone who has it set (useful if you use services).
1076     */
1077     opers_bypass_callerid = no;
1078    
1079     /*
1080     * pace_wait_simple: time between use of less intensive commands
1081     * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1082     */
1083     pace_wait_simple = 1 second;
1084    
1085     /*
1086     * pace_wait: time between more intensive commands
1087 michael 1488 * (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1088 db 897 */
1089     pace_wait = 10 seconds;
1090    
1091     /*
1092     * short_motd: send clients a notice telling them to read the motd
1093     * instead of forcing a motd to clients who may simply ignore it.
1094     */
1095     short_motd = no;
1096    
1097     /*
1098     * ping_cookie: require clients to respond exactly to a ping command,
1099     * can help block certain types of drones and FTP PASV mode spoofing.
1100     */
1101     ping_cookie = no;
1102    
1103     /* no_oper_flood: increase flood limits for opers. */
1104     no_oper_flood = yes;
1105    
1106     /*
1107     * true_no_oper_flood: completely eliminate flood limits for opers
1108     * and for clients with can_flood = yes in their auth {} blocks
1109     */
1110     true_no_oper_flood = yes;
1111    
1112     /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1113     oper_pass_resv = yes;
1114    
1115     /* REMOVE ME. The following line checks you've been reading. */
1116     havent_read_conf = 1;
1117    
1118     /*
1119     * max_targets: the maximum amount of targets in a single
1120     * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1121     */
1122     max_targets = 4;
1123    
1124     /*
1125     * message_locale: the default message locale
1126     * Use "standard" for the compiled in defaults.
1127     * To install the translated messages, go into messages/ in the
1128     * source directory and run `make install'.
1129     */
1130     message_locale = "standard";
1131    
1132     /*
1133     * usermodes configurable: a list of usermodes for the options below
1134     *
1135     * +b - bots - See bot and drone flooding notices
1136     * +c - cconn - Client connection/quit notices
1137 michael 959 * +C - cconn_full - Client connection/quit notices full
1138 db 897 * +D - deaf - Don't receive channel messages
1139     * +d - debug - See debugging notices
1140 michael 1426 * +f - full - See auth{} block full notices
1141 db 897 * +G - softcallerid - Server Side Ignore for users not on your channels
1142     * +g - callerid - Server Side Ignore (for privmsgs etc)
1143 michael 1294 * +H - hidden - Hides operator status to other users
1144 db 897 * +i - invisible - Not shown in NAMES or WHO unless you share a
1145     * a channel
1146 michael 1290 * +j - rej - See rejected client notices
1147 db 897 * +k - skill - See server generated KILL messages
1148     * +l - locops - See LOCOPS messages
1149     * +n - nchange - See client nick changes
1150     * +s - servnotice - See general server notices
1151     * +u - unauth - See unauthorized client notices
1152     * +w - wallop - See server generated WALLOPS
1153     * +x - external - See remote server connection and split notices
1154     * +y - spy - See LINKS, STATS, TRACE notices etc.
1155     * +z - operwall - See oper generated WALLOPS
1156     */
1157    
1158     /* oper_only_umodes: usermodes only opers may set */
1159 michael 1294 oper_only_umodes = bots, cconn, cconn_full, debug, full, hidden, skill,
1160 db 897 nchange, rej, spy, external, operwall,
1161     locops, unauth;
1162    
1163     /* oper_umodes: default usermodes opers get when they /oper */
1164     oper_umodes = bots, locops, servnotice, operwall, wallop;
1165    
1166     /*
1167     * use_egd: if your system does not have *random devices yet you
1168     * want to use OpenSSL and encrypted links, enable this. Beware -
1169     * EGD is *very* CPU intensive when gathering data for its pool
1170     */
1171     # use_egd = yes;
1172    
1173     /*
1174     * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1175     * which automatically finds the path.
1176     */
1177     # egdpool_path = "/var/run/egd-pool";
1178    
1179     /*
1180     * throttle_time: the minimum amount of time between connections from
1181     * the same ip. exempt {} blocks are excluded from this throttling.
1182     * Offers protection against flooders who reconnect quickly.
1183     * Set to 0 to disable.
1184     */
1185     throttle_time = 10;
1186     };
1187    
1188     modules {
1189     /*
1190 michael 951 * path: other paths to search for modules specified below
1191 michael 1441 * and in "/module load".
1192 db 897 */
1193 michael 1070 path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1194     path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1195 db 897
1196     /* module: the name of a module to load on startup/rehash */
1197 michael 959 #module = "some_module.la";
1198 db 897 };
1199 michael 1247
1200     /*
1201     * log {}: contains information about logfiles.
1202     */
1203     log {
1204     /* Do you want to enable logging to ircd.log? */
1205     use_logging = yes;
1206    
1207     file {
1208     type = oper;
1209     name = "/home/ircd/var/log/oper.log";
1210 michael 1250 size = unlimited;
1211 michael 1247 };
1212    
1213     file {
1214     type = user;
1215 michael 1249 name = "/home/ircd/var/log/user.log";
1216 michael 1247 size = 50 megabytes;
1217     };
1218    
1219     file {
1220     type = kill;
1221     name = "/home/ircd/var/log/kill.log";
1222     size = 50 megabytes;
1223     };
1224    
1225     file {
1226     type = kline;
1227     name = "/home/ircd/var/log/kline.log";
1228     size = 50 megabytes;
1229     };
1230    
1231     file {
1232     type = dline;
1233     name = "/home/ircd/var/log/dline.log";
1234     size = 50 megabytes;
1235     };
1236    
1237     file {
1238     type = gline;
1239     name = "/home/ircd/var/log/gline.log";
1240     size = 50 megabytes;
1241     };
1242    
1243     file {
1244     type = debug;
1245     name = "/home/ircd/var/log/debug.log";
1246     size = 50 megabytes;
1247     };
1248     };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28