/[svn]/ircd-hybrid-7.2/etc/example.efnet.conf
ViewVC logotype

Annotation of /ircd-hybrid-7.2/etc/example.efnet.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 901 - (hide annotations)
Sun Nov 4 13:55:43 2007 UTC (12 years, 10 months ago) by michael
File size: 38035 byte(s)
- Update example.efnet.conf according to dianes configure changes

1 michael 584 /* doc/example.efnet.conf - ircd-hybrid-7 EFnet Example configuration file
2 michael 583 * Copyright (C) 2000-2006 Hybrid Development Team
3 adx 30 *
4     * Written by ejb, wcampbel, db, leeh and others
5     * Other example configurations can be found in the source dir under
6     * etc/.
7     *
8 knight 31 * $Id$
9 adx 30 */
10    
11     /* IMPORTANT NOTES:
12     *
13     * auth {} blocks MUST be specified in order of precedence. The first one
14     * that matches a user will be used. So place spoofs first, then specials,
15     * then general access.
16     *
17     * Shell style (#), C++ style (//) and C style comments are supported.
18     *
19     * Files may be included by either:
20     * .include "filename"
21     * .include <filename>
22     *
23     * Times/durations are written as:
24     * 12 hours 30 minutes 1 second
25     *
26     * Valid units of time:
27     * month, week, day, hour, minute, second
28     *
29     * Valid units of size:
30     * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31     *
32     * Sizes and times may be singular or plural.
33     */
34    
35     /* EFNET NOTE:
36 michael 583 *
37 adx 30 * This configuration file is a BASIC configuration file for use
38     * on EFnet. You MUST still take the time to set this file up
39     * properly.
40     *
41     * DISCLAIMER: This file was submitted by Disciple@EFnet and has
42     * since been modified by the Hybrid team.
43     */
44    
45 michael 583 /*
46     * serverinfo {}: contains information about the server. (OLD M:)
47     */
48 adx 30 serverinfo {
49 michael 583 /*
50     * name: the name of our server. This cannot be changed at runtime.
51     */
52 adx 30 name = "efnet.irc";
53    
54     /*
55 michael 583 * sid: a server's unique ID. This is three characters long and must
56     * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
57     * a digit, followed by 2 alpha-numerical letters.
58     * NOTE: The letters must be capitalized. This cannot be changed at runtime.
59 adx 30 */
60     sid = "_CHANGE_ME_";
61    
62     /*
63     * description: the description of the server. '[' and ']' may not
64     * be used here for compatibility with older servers.
65     */
66     description = "hybrid-7 test server";
67    
68     /*
69     * network info: the name and description of the network this server
70     * is on. Shown in the 005 reply and used with serverhiding.
71     */
72     network_name = "EFnet";
73     network_desc = "Eris Free Network";
74    
75     /*
76     * hub: allow this server to act as a hub and have multiple servers
77 michael 885 * connected to it.
78 adx 30 */
79     hub = no;
80    
81     /*
82     * vhost: the IP to bind to when we connect outward to ipv4 servers.
83     * This should be an ipv4 IP only, or "* for INADDR_ANY.
84     */
85     #vhost = "192.169.0.1";
86    
87     /*
88     * vhost6: the IP to bind to when we connect outward to ipv6 servers.
89     * This should be an ipv6 IP only, or "* for INADDR_ANY.
90     */
91     #vhost6 = "3ffe:80e8:546::2";
92    
93     /* max_clients: the maximum number of clients allowed to connect */
94     max_clients = 512;
95    
96     /*
97     * rsa key: the path to the file containing our rsa key for cryptlink.
98     *
99     * Example command to store a 2048 bit RSA keypair in
100     * rsa.key, and the public key in rsa.pub:
101     *
102     * openssl genrsa -out rsa.key 2048
103     * openssl rsa -in rsa.key -pubout -out rsa.pub
104     * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
105     * chmod 0600 rsa.key
106     * chmod 0644 rsa.pub
107     */
108     #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
109     };
110    
111 michael 583 /*
112     * admin {}: contains admin information about the server. (OLD A:)
113     */
114 adx 30 admin {
115     name = "EFnet Admin";
116     description = "Main Server Administrator";
117     email = "<irc-admin@efnet.irc>";
118     };
119    
120 michael 583 /*
121     * log {}: contains information about logfiles.
122     */
123     log {
124 adx 30 /* Do you want to enable logging to ircd.log? */
125     use_logging = yes;
126    
127     /*
128     * logfiles: the logfiles to use for user connects, /oper uses,
129     * and failed /oper. These files must exist for logging to be used.
130     */
131 michael 583 fname_userlog = "logs/userlog";
132     fname_operlog = "logs/operlog";
133     fname_killlog = "logs/kill";
134     fname_klinelog = "logs/kline";
135     fname_glinelog = "logs/gline";
136 adx 30
137     /*
138 michael 583 * log_level: the amount of detail to log in ircd.log. The
139 adx 30 * higher, the more information is logged. May be changed
140     * once the server is running via /quote SET LOG. Either:
141     * L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
142     */
143     log_level = L_INFO;
144     };
145    
146 michael 583 /*
147     * class {}: contains information about classes for users (OLD Y:)
148     */
149 adx 30 class {
150     /* name: the name of the class. classes are text now */
151     name = "users";
152    
153     /*
154     * ping_time: how often a client must reply to a PING from the
155     * server before they are dropped.
156     */
157     ping_time = 90 seconds;
158    
159 michael 583 /*
160     * number_per_ip: how many local users are allowed to connect
161     * from one IP (optional)
162     */
163 adx 30 number_per_ip = 2;
164    
165 michael 583 /*
166     * max_local: how many local users are allowed to connect
167     * from one ident@host (optional)
168     */
169 adx 30 max_local = 2;
170    
171 michael 583 /*
172     * max_global: network-wide limit of users per ident@host (optional)
173     */
174 adx 30 max_global = 10;
175    
176 michael 583 /*
177     * max_number: the maximum number of users allowed in this class (optional)
178     */
179 adx 30 max_number = 100;
180    
181 michael 583 /*
182     * the following lines are optional and allow you to define
183     * how many users can connect from one /NN subnet
184     */
185     cidr_bitlen_ipv4 = 24;
186     cidr_bitlen_ipv6 = 120;
187     number_per_cidr = 16;
188 adx 40
189 adx 30 /*
190     * sendq: the amount of data allowed in a clients queue before
191     * they are dropped.
192     */
193     sendq = 100 kbytes;
194     };
195    
196     class {
197     name = "opers";
198    
199     /*
200     * contrary to seeming popular belief, setting ping time
201     * higher for an oper is NOT doing them a favor.
202     * Since if a link is dead its dead and it means
203     * you have to use another nick long enough to kill the old one :-)
204     * Its much better to use a fairly standard 90 second ping time
205     */
206     ping_time = 90 seconds;
207     number_per_ip = 10;
208     max_number = 100;
209     sendq = 1 mbyte;
210     };
211    
212     class {
213     name = "server";
214    
215     /*
216 michael 583 * Same thing here. It's a fallacy to think increasing
217 adx 30 * ping time for servers is a "good idea." All it leads to
218     * is "ghosting" on one end. Not a good idea.
219     */
220     ping_time = 90 seconds;
221    
222 michael 583 /*
223     * ping_warning: how fast a server must reply to a PING before
224     * a warning to opers is generated.
225     */
226     ping_warning = 15 seconds;
227 adx 30
228     /*
229     * connectfreq: only used in server classes. Specifies the delay
230     * between autoconnecting to servers.
231     *
232     * Both comstud and I recommend 10 minutes a few years ago.
233     * 15 minutes might be right now. The reason you don't want it too
234     * low is, you make the servers reconnect too quickly with
235     * a large sendq, and they _will_ nick collide. badly. 5 minutes
236     * IS way too short.
237     */
238     connectfreq = 15 minutes;
239    
240     /* max number: the amount of servers to autoconnect to */
241     max_number = 1;
242    
243 michael 583 /* sendq: servers need a higher sendq as they send more data */
244 adx 30 sendq = 15 megabytes;
245     };
246    
247 michael 583 /*
248     * listen {}: contains information about the ports ircd listens on (OLD P:)
249     */
250 adx 30 listen {
251     /*
252     * port: the specific port to listen on. If no host is specified
253     * before, it will listen on all available IPs.
254     *
255     * Ports are separated via a comma, a range may be specified using ".."
256     */
257    
258     /* port: listen on all available IPs, ports 6665 to 6669 */
259     port = 6665 .. 6669;
260    
261     /*
262     * Listen on 192.168.0.1/7023 and hidden from STATS P
263     * unless you are an administrator.
264     *
265     * NOTE: The "flags" directive has to come before "port". Always!
266 michael 900 *
267     * Currently available flags are:
268     *
269     * ssl - Port is for SSL client connections only
270     * server - Only server connections are permitted
271     * hidden - Port is hidden from /stats P
272 adx 30 */
273     flags = hidden;
274     host = "192.168.0.1";
275     port = 7023;
276    
277     /*
278     * host: set a specific IP/host the ports after the line will listen
279     * on. This may be ipv4 or ipv6.
280     */
281     host = "1.2.3.4";
282     port = 7000, 7001;
283    
284     host = "3ffe:1234:a:b:c::d";
285     port = 7002;
286     };
287    
288 michael 583 /*
289     * auth {}: allow users to connect to the ircd (OLD I:)
290     */
291 adx 30 auth {
292     /*
293     * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
294     * lines are permitted per auth block.
295     */
296     user = "*@172.16.0.0/12";
297     user = "*test@123D:B567:*";
298    
299     /* password: an optional password that is required to use this block */
300     password = "letmein";
301    
302     /*
303     * encrypted: controls whether the auth password above has been
304     * encrypted.
305     */
306     encrypted = yes;
307    
308     /*
309     * spoof: fake the users host to this. This is free-form,
310     * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
311     */
312     spoof = "I.still.hate.packets";
313    
314     /* class: the class the user is placed in */
315     class = "opers";
316    
317     /*
318     * need_password: don't allow users who haven't supplied the correct
319     * password to connect using another auth{} block
320     * ('&' prefix on /stats I if disabled)
321     * need_ident: require the user to have identd to connect ('+' prefix on /stats I)
322     * spoof_notice: enable spoofing notification to admins
323     * exceed_limit: allow a user to exceed class limits ('>' prefix on /stats I)
324     * kline_exempt: exempt this user from k/glines ('^' prefix on /stats I)
325     * gline_exempt: exempt this user from glines ('_' prefix on /stats I)
326     * resv_exempt: exempt this user from resvs ('$' prefix on /stats I)
327     * no_tilde: remove ~ from a user with no ident ('-' prefix on /stats I)
328     * can_flood: allow this user to exceed flood limits ('|' prefix on /stats I)
329 michael 390 * can_idle: exempt this user from idle restrictions ('<' prefix on /stats I)
330 adx 30 */
331     flags = need_password, spoof_notice, exceed_limit, kline_exempt,
332     gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
333     };
334    
335     auth {
336     /*
337     * redirect: the server and port to redirect a user to. A user does
338     * not have to obey the redirection, the ircd just suggests an alternative
339     * server for them.
340     */
341 db 806 redirserv = "this.is.not.a.real.server";
342 adx 30 redirport = 6667;
343    
344 db 806 user = "*.server";
345 adx 30
346     /* class: a class is required even though it is not used */
347     class = "users";
348     };
349    
350     auth {
351     user = "*@*";
352     class = "users";
353     flags = need_ident;
354     };
355    
356 michael 583 /*
357     * operator {}: defines ircd operators. (OLD O:)
358     *
359 adx 30 * ircd-hybrid no longer supports local operators, privileges are
360     * controlled via flags.
361     */
362     operator {
363     /* name: the name of the oper */
364 michael 583 /* NOTE: operator "opername"{} is also supported */
365 adx 30 name = "god";
366    
367     /*
368     * user: the user@host required for this operator. CIDR is not
369     * supported. Multiple user="" lines are supported.
370     */
371     user = "*god@*";
372     user = "*@127.0.0.1";
373    
374     /*
375     * password: the password required to oper. By default this will
376     * need to be encrypted using 'mkpasswd'. MD5 is supported.
377     */
378     password = "etcnjl8juSU1E";
379    
380     /*
381     * encrypted: controls whether the oper password above has been
382     * encrypted. (OLD CRYPT_OPER_PASSWORD now optional per operator)
383     */
384     encrypted = yes;
385    
386     /*
387     * rsa_public_key_file: the public key for this oper when using Challenge.
388     * A password should not be defined when this is used, see
389     * doc/challenge.txt for more information.
390     */
391     # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
392    
393     /* class: the class the oper joins when they successfully /oper */
394     class = "opers";
395    
396     /*
397 michael 56 * umodes: default usermodes opers get when they /oper. If defined,
398     * it will override oper_umodes settings in general {}.
399     * Available usermodes:
400     *
401     * +b - bots - See bot and drone flooding notices
402     * +c - cconn - Client connection/quit notices
403 db 853 * +C - cconn_full - Client connection/quit notices full
404 michael 56 * +D - deaf - Don't receive channel messages
405     * +d - debug - See debugging notices
406     * +f - full - See I: line full notices
407     * +G - softcallerid - Server Side Ignore for users not on your channels
408     * +g - callerid - Server Side Ignore (for privmsgs etc)
409     * +i - invisible - Not shown in NAMES or WHO unless you share a
410     * a channel
411     * +k - skill - See server generated KILL messages
412     * +l - locops - See LOCOPS messages
413     * +n - nchange - See client nick changes
414     * +r - rej - See rejected client notices
415     * +s - servnotice - See general server notices
416     * +u - unauth - See unauthorized client notices
417     * +w - wallop - See server generated WALLOPS
418     * +x - external - See remote server connection and split notices
419     * +y - spy - See LINKS, STATS, TRACE notices etc.
420     * +z - operwall - See oper generated WALLOPS
421     */
422     # umodes = locops, servnotice, operwall, wallop;
423    
424     /*
425 adx 30 * privileges: controls the activities and commands an oper is
426     * allowed to do on the server. All options default to no.
427     * Available options:
428     *
429     * global_kill: allows remote users to be /KILL'd (OLD 'O' flag)
430     * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
431     * remoteban: allows remote KLINE/UNKLINE
432     * kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
433     * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
434     * gline: allows GLINE (OLD 'G' flag)
435 michael 583 * xline: allows XLINE (OLD 'X' flag)
436 adx 30 * operwall: allows OPERWALL
437     * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
438     * via usermode +n
439     * rehash: allows oper to REHASH config (OLD 'H' flag)
440     * die: allows DIE and RESTART (OLD 'D' flag)
441     * admin: gives admin privileges. admins
442     * may (un)load modules and see the
443     * real IPs of servers.
444     * hidden_admin: same as 'admin', but noone can recognize you as
445 michael 583 * being an admin
446 adx 30 * hidden_oper: not shown in /stats p (except for other operators)
447     */
448     /* You can either use
449     * die = yes;
450     * rehash = yes;
451     *
452     * or in a flags statement i.e.
453     * flags = die, rehash;
454     *
455     * You can also negate a flag with ~ i.e.
456     * flags = ~remote;
457     *
458     */
459     flags = global_kill, remote, kline, unkline, xline,
460     die, rehash, nick_changes, admin, operwall;
461     };
462    
463 michael 583 /*
464     * connect {}: controls servers we connect to (OLD C:, N:, H:, L:)
465     */
466 adx 30 connect {
467     /* name: the name of the server */
468     name = "irc.uplink.com";
469    
470     /*
471     * host: the host or IP to connect to. If a hostname is used it
472     * must match the reverse dns of the server.
473     */
474     host = "192.168.0.1";
475    
476 michael 583 /*
477     * vhost: the IP to bind to when we connect outward to servers.
478     * serverinfo::vhost and serverinfo::vhost6 will be overridden
479     * by this directive.
480     */
481     vhost = "192.168.0.2";
482 michael 548
483 adx 30 /*
484     * passwords: the passwords we send (OLD C:) and accept (OLD N:).
485     * The remote server will have these passwords reversed.
486     */
487     send_password = "password";
488     accept_password = "anotherpassword";
489    
490     /*
491     * encrypted: controls whether the accept_password above has been
492     * encrypted. (OLD CRYPT_LINK_PASSWORD now optional per connect)
493     */
494     encrypted = no;
495    
496     /* port: the port to connect to this server on */
497     port = 6666;
498    
499     /*
500 michael 583 * hub_mask: the mask of servers that this server may hub. Multiple
501 adx 30 * entries are permitted
502     */
503     hub_mask = "*";
504    
505     /*
506     * leaf_mask: the mask of servers this server may not hub. Multiple
507     * entries are permitted. Useful for forbidding EU -> US -> EU routes.
508     */
509     # leaf_mask = "*.uk";
510    
511 michael 583 /* fakename: the servername we pretend to be when we connect */
512 adx 30 # fakename = "*.arpa";
513    
514     /* class: the class this server is in */
515     class = "server";
516    
517     /*
518 michael 124 * autoconn: controls whether we autoconnect to this server or not,
519 michael 583 * dependent on class limits. By default, this is disabled.
520 adx 30 * compressed: controls whether traffic is compressed via ziplinks.
521     * By default, this is disabled
522     * cryptlink: enable full encryption for all data passing between our
523     * server and this link and rsa authentication.
524     * burst_away: This will send the /away string that users have set
525 michael 583 * on the server burst. Note this can be a lot of data
526 adx 30 * and slow down your server burst.
527 michael 330 * topicburst: Send topics to this server during channel burst. Works
528     * only if the server we are connecting to is capable
529     * of TBURST/TB.
530 adx 30 */
531 michael 885 # flags = autoconn, compressed, cryptlink, burst_away, topicburst;
532 adx 30 };
533    
534     connect {
535     name = "encrypted.auth.example";
536     host = "some.host.somewhere";
537     port = 6667;
538    
539     flags = cryptlink;
540    
541     /*
542     * rsa_public_key_file: the path to the public keyfile of the server.
543     * Used instead of passwords.
544     */
545     rsa_public_key_file = "etc/remote.server.keyfile";
546    
547     /*
548     * cipher preference: set the preferred cipher for this link
549     *
550     * Available ciphers are:
551     * BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
552     * RC5.12/128 RC5.8/128 3DES/168 DES/56
553     *
554     * NOTE: Some ciphers may not be supported by your OpenSSL.
555     * Check the output from 'configure' for available ciphers.
556     *
557     * NOTE2: To help you decide what cipher to use, tools/encspeed
558     * will show you approximately how fast each cipher is.
559     * However, blowfish is fast and secure, and is probably
560     * a good default for most situations.
561     *
562     * NOTE3: Default if none is set is BF/128
563     *
564     * The cipher *MUST* be the same in both directions. If you
565     * set a cipher preference, your uplink must set the same cipher,
566     * else it will not link.
567     */
568     # cipher_preference = "BF/168";
569     };
570    
571     /*
572 michael 583 * NOTE: Don't add an extra 'name=' entry if you use
573 adx 30 * the connect "name"{} feature
574     */
575     connect "ipv6.some.server" {
576     host = "3ffd:dead:beef::1";
577     send_password = "password";
578     accept_password = "password";
579     port = 6666;
580    
581     /*
582     * aftype: controls whether the connection uses "ipv4" or "ipv6".
583     * Default is ipv4.
584     */
585     aftype = ipv6;
586     class = "server";
587     };
588    
589 michael 583 /*
590     * cluster {}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
591 adx 30 * automatically (OLD hyb6 SLAVE_SERVERS)
592     */
593     cluster {
594 michael 583 /*
595     * name: the server to share with, this can take wildcards
596     *
597     * NOTE: only local actions will be clustered, meaning if
598 adx 30 * the server receives a shared kline/unkline/etc, it
599     * will not be propagated to clustered servers.
600     *
601     * Remote servers are not necessarily required to accept
602     * clustered lines, they need a shared{} for *THIS* server
603     * in order to accept them.
604     */
605     name = "*.arpa";
606    
607     /*
608     * type: list of what to share, options are as follows:
609     * kline - share klines
610     * tkline - share temporary klines
611     * unkline - share unklines
612     * xline - share xlines
613     * txline - share temporary xlines
614     * unxline - share unxlines
615     * resv - share resvs
616     * tresv - share temporary resvs
617     * unresv - share unresvs
618     * locops - share locops
619     * all - share all of the above (default)
620     */
621     type = kline, unkline, locops, xline, resv;
622     };
623    
624 michael 583 /*
625     * shared {}: users that are allowed to remote kline (OLD U:)
626 adx 30 *
627 michael 583 * NOTE: This can be effectively used for remote klines.
628     * Please note that there is no password authentication
629     * for users setting remote klines. You must also be
630     * /oper'd in order to issue a remote kline.
631 adx 30 */
632     shared {
633     /*
634     * name: the server the user must be on to set klines. If this is not
635     * specified, the user will be allowed to kline from all servers.
636     */
637     name = "irc2.some.server";
638    
639     /*
640     * user: the user@host mask that is allowed to set klines. If this is
641     * not specified, all users on the server above will be allowed to set
642     * a remote kline.
643     */
644     user = "oper@my.host.is.spoofed";
645    
646     /*
647     * type: list of what to share, options are as follows:
648     * kline - allow oper/server to kline
649     * tkline - allow temporary klines
650     * unkline - allow oper/server to unkline
651     * xline - allow oper/server to xline
652     * txline - allow temporary xlines
653     * unxline - allow oper/server to unxline
654     * resv - allow oper/server to resv
655     * tresv - allow temporary resvs
656     * unresv - allow oper/server to unresv
657     * locops - allow oper/server to locops - only used for servers that cluster
658     * all - allow oper/server to do all of the above (default)
659     */
660     type = kline, unkline, resv;
661     };
662    
663 michael 583 /*
664     * kill {}: users that are not allowed to connect (OLD K:)
665 adx 30 * Oper issued klines will be added to the specified kline config
666     */
667     kill {
668     user = "bad@*.hacked.edu";
669     reason = "Obviously hacked account";
670     };
671    
672     kill {
673     user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.org$";
674     type = regex;
675     };
676    
677 michael 583 /*
678     * deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
679 adx 30 * Oper issued dlines will be added to the specified dline config
680     */
681     deny {
682     ip = "10.0.1.0/24";
683     reason = "Reconnecting vhosted bots";
684     };
685    
686 michael 583 /*
687     * exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:)
688 adx 30 *
689 michael 584 * EFnet Note: We really suggest to enable general::stats_e_disabled
690     * if you plan to exempt EFnet server IPs you don't want to show to
691     * other operators and/or administrators through "STATS e".
692 adx 30 */
693     exempt {
694     ip = "192.168.0.0/16";
695     };
696    
697 michael 583 /*
698     * resv {}: nicks and channels users may not use/join (OLD Q:)
699     */
700 adx 30 resv {
701     /* reason: the reason for the proceeding resv's */
702     reason = "There are no services on this network";
703    
704     /* resv: the nicks and channels users may not join/use */
705     nick = "nickserv";
706     nick = "chanserv";
707     nick = "operserv";
708     nick = "JUPES";
709     nick = "JUPE";
710     nick = "CH?NF?X"; # CHANFIX (services.int)
711    
712     /* These are totally optional, but may be a good idea */
713     nick = "oper";
714     nick = "ircop";
715     nick = "op";
716     nick = "ident";
717     nick = "pass";
718     channel = "#jupedchan";
719    
720     /* resv: wildcard masks are also supported in nicks only */
721     reason = "Clone bots";
722     nick = "clone*";
723     };
724    
725 michael 583 /*
726     * gecos {}: The X: replacement, used for banning users based on
727     * their "realname".
728 adx 30 */
729     gecos {
730     name = "*sex*";
731     reason = "Possible spambot";
732     };
733    
734     gecos {
735     name = "sub7server";
736     reason = "Trojan drone";
737     };
738    
739     gecos {
740     name = "*http*";
741     reason = "Spambot";
742     };
743    
744     gecos {
745     name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
746     type = regex;
747     };
748    
749     /*
750 michael 583 * channel {}: The channel block contains options pertaining to channels
751 adx 30 */
752     channel {
753 michael 56 /*
754 michael 632 * disable_fake_channels: this option, if set to 'yes', will
755     * disallow clients to create or join channels that have one
756     * of the following ASCII characters in their name:
757     *
758     * 2 | bold
759     * 3 | mirc color
760 michael 639 * 15 | plain text
761 michael 632 * 22 | reverse
762     * 31 | underline
763     * 160 | non-breaking space
764     */
765     disable_fake_channels = yes;
766    
767     /*
768 michael 56 * restrict_channels: reverse channel RESVs logic, only reserved
769     * channels are allowed
770     */
771     restrict_channels = no;
772 adx 30
773     /*
774     * disable_local_channels: prevent users from joining &channels.
775     */
776     disable_local_channels = no;
777    
778     /*
779     * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
780     * that can join a +i channel without an invite.
781     */
782     use_invex = yes;
783    
784     /*
785     * use_except: Enable/disable channel mode +e, a n!u@h list of masks
786     * that can join a channel through a ban (+b).
787     */
788     use_except = yes;
789    
790     /*
791     * use_knock: Allows users to request an invite to a channel that
792     * is locked somehow (+ikl). If the channel is +p or you are banned
793     * the knock will not be sent.
794     *
795     * EFnet Note: This seems to be used mostly by European servers
796     * and not North American ones.
797 michael 583 * Please feel free to disable this if you do not
798     * want to run channel knock.
799 adx 30 * channel knock allows an user to "/quote knock #channel"
800 michael 583 * to ask for an invite. It is typically used in eu-efnet
801 adx 30 * to ask for an invite to #eu-opers.
802 adx 201 * A user who is banned will not have their knock
803 michael 583 * sent to channel. It is paced, so knock will not
804 adx 30 * cause a flood.
805     */
806     use_knock = yes;
807    
808     /*
809     * knock_delay: The amount of time a user must wait between issuing
810     * the knock command.
811     */
812     knock_delay = 1 minutes;
813    
814     /*
815     * knock_delay_channel: How often a knock to any specific channel
816     * is permitted, regardless of the user sending the knock.
817     */
818     knock_delay_channel = 1 minute;
819    
820 michael 583 /*
821     * burst_topicwho: enable sending of who set topic on topicburst
822     * default is yes
823     */
824 adx 201 burst_topicwho = yes;
825 adx 30
826 michael 583 /*
827     * max_chans_per_user: The maximum number of channels a user can
828     * join/be on.
829     */
830 adx 30 max_chans_per_user = 25;
831    
832     /* quiet_on_ban: stop banned people talking in channels. */
833     quiet_on_ban = yes;
834    
835     /* max_bans: maximum number of +b/e/I modes in a channel */
836     max_bans = 100;
837    
838     /*
839 adx 201 * how many joins in how many seconds constitute a flood, use 0 to
840     * disable. +b opers will be notified (changeable via /set)
841     */
842     join_flood_count = 16;
843     join_flood_time = 8 seconds;
844    
845     /*
846 adx 30 * splitcode: The ircd will now check splitmode every few seconds.
847     *
848     * Either split users or split servers can activate splitmode, but
849     * both conditions must be met for the ircd to deactivate splitmode.
850     *
851     * You may force splitmode to be permanent by /quote set splitmode on
852     */
853    
854     /*
855     * default_split_user_count: when the usercount is lower than this level,
856     * consider ourselves split. This must be set for automatic splitmode.
857     */
858     default_split_user_count = 40000;
859    
860     /*
861     * default_split_server_count: when the servercount is lower than this,
862     * consider ourselves split. This must be set for automatic splitmode.
863     */
864     default_split_server_count = 10;
865    
866     /* split no create: disallow users creating channels on split. */
867     no_create_on_split = yes;
868    
869     /* split: no join: disallow users joining channels at all on a split */
870     no_join_on_split = no;
871     };
872    
873     /*
874 michael 583 * serverhide {}: The serverhide block contains the options regarding
875     * serverhiding
876 adx 30 */
877     serverhide {
878     /*
879     * flatten_links: this option will show all servers in /links appear
880     * that they are linked to this current server
881     *
882     * EFnet Note: While this is not a requirement on EFnet, it
883     * may be a good idea. Except, it's useless
884     * unless the entire net runs it.
885     */
886     flatten_links = yes;
887    
888     /*
889     * links_delay: how often to update the links file when it is
890     * flattened.
891     */
892     links_delay = 5 minutes;
893    
894     /*
895     * hidden: hide this server from a /links output on servers that
896 michael 583 * support it. This allows hub servers to be hidden etc.
897 adx 30 */
898     hidden = no;
899    
900     /*
901     * disable_hidden: prevent servers hiding themselves from a
902     * /links output.
903     */
904     disable_hidden = no;
905    
906     /*
907     * hide_servers: hide remote servernames everywhere and instead use
908     * hidden_name and network_desc.
909     */
910     hide_servers = no;
911    
912     /*
913     * Use this as the servername users see if hide_servers = yes.
914     */
915 michael 583 hidden_name = "*.hidden.com";
916 adx 30
917     /*
918     * hide_server_ips: If this is disabled, opers will be unable to see servers
919     * ips and will be shown a masked ip, admins will be shown the real ip.
920     *
921     * If this is enabled, nobody can see a servers ip. *This is a kludge*, it
922     * has the side effect of hiding the ips everywhere, including logfiles.
923     *
924     * We recommend you leave this disabled, and just take care with who you
925     * give admin=yes; to.
926     */
927     hide_server_ips = yes;
928     };
929    
930     /*
931 michael 583 * general {}: The general block contains many of the options that were once
932     * compiled in options in config.h. The general block is read at start time.
933 adx 30 */
934     general {
935 michael 876 /* max_watch: maximum WATCH entries */
936     max_watch = 64;
937    
938 adx 30 /*
939     * gline_min_cidr: the minimum required length of a CIDR bitmask
940     * for IPv4 based glines
941     */
942     gline_min_cidr = 16;
943    
944     /*
945     * gline_min_cidr6: the minimum required length of a CIDR bitmask
946     * for IPv6 based glines
947     */
948     gline_min_cidr6 = 48;
949    
950     /*
951     * Whether to automatically set mode +i on connecting users.
952     */
953     invisible_on_connect = yes;
954    
955     /*
956     * If you don't explicitly specify burst_away in your connect blocks, then
957     * they will default to the burst_away value below.
958     */
959     burst_away = no;
960    
961     /*
962     * Show "actually using host <ip>" on /whois when possible.
963     */
964     use_whois_actually = yes;
965    
966     /*
967     * Max time from the nickname change that still causes KILL
968     * automatically to switch for the current nick of that user. (seconds)
969     */
970     kill_chase_time_limit = 90;
971    
972     /*
973     * If hide_spoof_ips is disabled, opers will be allowed to see the real IP of spoofed
974 michael 583 * users in /trace etc. If this is defined they will be shown a masked IP.
975 adx 30 */
976     hide_spoof_ips = yes;
977    
978     /*
979 michael 583 * Ignore bogus timestamps from other servers. Yes, this will desync
980 adx 30 * the network, but it will allow chanops to resync with a valid non TS 0
981     *
982     * This should be enabled network wide, or not at all.
983     */
984     ignore_bogus_ts = no;
985    
986     /*
987     * disable_auth: completely disable ident lookups; if you enable this,
988     * be careful of what you set need_ident to in your auth {} blocks
989     */
990     disable_auth = no;
991    
992     /* disable_remote_commands: disable users doing commands on remote servers */
993     disable_remote_commands = no;
994    
995     /*
996 michael 583 * tkline_expire_notices: enables or disables temporary kline/xline
997     * expire notices.
998 adx 30 */
999     tkline_expire_notices = no;
1000    
1001     /*
1002     * default_floodcount: the default value of floodcount that is configurable
1003     * via /quote set floodcount. This is the amount of lines a user
1004     * may send to any other user/channel in one second.
1005     */
1006     default_floodcount = 10;
1007    
1008     /*
1009     * failed_oper_notice: send a notice to all opers on the server when
1010     * someone tries to OPER and uses the wrong password, host or ident.
1011     */
1012     failed_oper_notice = yes;
1013    
1014     /*
1015     * dots_in_ident: the amount of '.' characters permitted in an ident
1016     * reply before the user is rejected.
1017     */
1018     dots_in_ident = 0;
1019    
1020     /*
1021     * dot_in_ip6_addr: ircd-hybrid-6.0 and earlier will disallow hosts
1022 michael 583 * without a '.' in them. This will add one to the end. Only needed
1023 adx 30 * for older servers.
1024     */
1025     dot_in_ip6_addr = no;
1026    
1027     /*
1028     * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1029     * placed via the server. klines hand placed are exempt from limits.
1030     * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1031     */
1032     min_nonwildcard = 3;
1033    
1034     /*
1035     * min_nonwildcard_simple: the minimum non wildcard characters in
1036     * gecos bans. wildcard chars: '*' '?' '#'
1037     */
1038     min_nonwildcard_simple = 3;
1039    
1040     /* max_accept: maximum allowed /accept's for +g usermode */
1041     max_accept = 20;
1042    
1043     /* anti_nick_flood: enable the nickflood control code */
1044     anti_nick_flood = yes;
1045    
1046     /* nick flood: the nick changes allowed in the specified period */
1047     max_nick_time = 20 seconds;
1048     max_nick_changes = 5;
1049    
1050     /*
1051     * anti_spam_exit_message_time: the minimum time a user must be connected
1052     * before custom quit messages are allowed.
1053     */
1054     anti_spam_exit_message_time = 5 minutes;
1055    
1056     /*
1057     * ts delta: the time delta allowed between server clocks before
1058     * a warning is given, or before the link is dropped. all servers
1059     * should run ntpdate/rdate to keep clocks in sync
1060     */
1061     ts_warn_delta = 30 seconds;
1062     ts_max_delta = 5 minutes;
1063    
1064     /*
1065     * kline_with_reason: show the user the reason why they are k/d/glined
1066     * on exit. May give away who set k/dline when set via tcm.
1067     */
1068     kline_with_reason = yes;
1069    
1070     /*
1071     * kline_reason: show this message to users on channel
1072     * instead of the oper reason.
1073     */
1074     kline_reason = "Connection closed";
1075    
1076 michael 583 /*
1077     * reject_hold_time: wait this amount of time before disconnecting
1078     * a rejected client. Use 0 to disable.
1079     */
1080     reject_hold_time = 30 seconds;
1081 adx 30
1082     /*
1083     * warn_no_nline: warn opers about servers that try to connect but
1084     * we don't have a connect {} block for. Twits with misconfigured
1085     * servers can get really annoying with this enabled.
1086     */
1087     warn_no_nline = yes;
1088    
1089 michael 584 /*
1090     * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1091     * operators and administrators. Doing so is a good idea in case
1092     * there are any exempted (exempt{}) server IPs you don't want to
1093     * see leaked.
1094     */
1095     stats_e_disabled = no;
1096    
1097 adx 30 /* stats_o_oper only: make stats o (opers) oper only */
1098     stats_o_oper_only = yes;
1099    
1100     /* stats_P_oper_only: make stats P (ports) oper only */
1101     stats_P_oper_only = yes;
1102    
1103     /*
1104     * stats i oper only: make stats i (auth {}) oper only. set to:
1105     * yes: show users no auth blocks, made oper only.
1106     * masked: show users first matching auth block
1107     * no: show users all auth blocks.
1108     */
1109     stats_i_oper_only = yes;
1110    
1111     /*
1112     * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1113     * yes: show users no auth blocks, made oper only
1114     * masked: show users first matching auth block
1115     * no: show users all auth blocks.
1116     */
1117     stats_k_oper_only = yes;
1118 michael 583
1119 adx 30 /*
1120     * caller_id_wait: time between notifying a +g user that somebody
1121     * is messaging them.
1122     */
1123     caller_id_wait = 1 minute;
1124    
1125     /*
1126 michael 56 * opers_bypass_callerid: allows operators to bypass +g and message
1127     * anyone who has it set (useful if you use services).
1128     */
1129     opers_bypass_callerid = no;
1130    
1131     /*
1132 adx 30 * pace_wait_simple: time between use of less intensive commands
1133 adx 269 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1134 adx 30 */
1135     pace_wait_simple = 1 second;
1136    
1137     /*
1138     * pace_wait: time between more intensive commands
1139 adx 269 * (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1140 adx 30 */
1141     pace_wait = 10 seconds;
1142    
1143     /*
1144     * short_motd: send clients a notice telling them to read the motd
1145     * instead of forcing a motd to clients who may simply ignore it.
1146     */
1147     short_motd = no;
1148    
1149     /*
1150     * ping_cookie: require clients to respond exactly to a ping command,
1151     * can help block certain types of drones and FTP PASV mode spoofing.
1152     */
1153     ping_cookie = no;
1154    
1155     /* no_oper_flood: increase flood limits for opers. */
1156     no_oper_flood = yes;
1157    
1158     /*
1159     * true_no_oper_flood: completely eliminate flood limits for opers
1160     * and for clients with can_flood = yes in their auth {} blocks
1161     */
1162     true_no_oper_flood = yes;
1163    
1164     /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1165     oper_pass_resv = yes;
1166    
1167     /*
1168     * idletime: the maximum amount of time a user may idle before
1169     * they are disconnected
1170     */
1171     idletime = 0;
1172    
1173     /* REMOVE ME. The following line checks you've been reading. */
1174     havent_read_conf = 1;
1175    
1176     /*
1177     * max_targets: the maximum amount of targets in a single
1178     * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1179     */
1180     max_targets = 4;
1181    
1182     /*
1183     * client_flood: maximum amount of data in a clients queue before
1184     * they are dropped for flooding.
1185     */
1186     client_flood = 2560 bytes;
1187    
1188     /*
1189     * message_locale: the default message locale
1190     * Use "standard" for the compiled in defaults.
1191     * To install the translated messages, go into messages/ in the
1192     * source directory and run `make install'.
1193     */
1194     message_locale = "standard";
1195    
1196     /*
1197     * usermodes configurable: a list of usermodes for the options below
1198     *
1199     * +b - bots - See bot and drone flooding notices
1200     * +c - cconn - Client connection/quit notices
1201 db 853 * +C - cconn - Client connection/quit notices full
1202 adx 30 * +D - deaf - Don't receive channel messages
1203     * +d - debug - See debugging notices
1204     * +f - full - See I: line full notices
1205     * +G - softcallerid - Server Side Ignore for users not on your channels
1206     * +g - callerid - Server Side Ignore (for privmsgs etc)
1207     * +i - invisible - Not shown in NAMES or WHO unless you share a
1208     * a channel
1209     * +k - skill - See server generated KILL messages
1210     * +l - locops - See LOCOPS messages
1211     * +n - nchange - See client nick changes
1212     * +r - rej - See rejected client notices
1213     * +s - servnotice - See general server notices
1214     * +u - unauth - See unauthorized client notices
1215     * +w - wallop - See server generated WALLOPS
1216     * +x - external - See remote server connection and split notices
1217     * +y - spy - See LINKS, STATS, TRACE notices etc.
1218     * +z - operwall - See oper generated WALLOPS
1219     */
1220 michael 583
1221 adx 30 /* oper_only_umodes: usermodes only opers may set */
1222 db 853 oper_only_umodes = bots, cconn, cconn_full, debug, full, skill,
1223     nchange, rej, spy, external, operwall,
1224     locops, unauth;
1225 adx 30
1226     /* oper_umodes: default usermodes opers get when they /oper */
1227 adx 264 oper_umodes = bots, locops, servnotice, operwall, wallop;
1228 adx 30
1229     /*
1230     * servlink_path: path to 'servlink' program used by ircd to handle
1231     * encrypted/compressed server <-> server links.
1232     *
1233     * only define if servlink is not in same directory as ircd itself.
1234     */
1235     #servlink_path = "/usr/local/ircd/bin/servlink";
1236    
1237     /*
1238     * default_cipher_preference: default cipher to use for cryptlink when none is
1239     * specified in connect block.
1240     */
1241     #default_cipher_preference = "BF/168";
1242    
1243     /*
1244     * use_egd: if your system does not have *random devices yet you
1245     * want to use OpenSSL and encrypted links, enable this. Beware -
1246     * EGD is *very* CPU intensive when gathering data for its pool
1247     */
1248     # use_egd = yes;
1249    
1250     /*
1251     * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1252     * which automatically finds the path.
1253     */
1254     # egdpool_path = "/var/run/egd-pool";
1255    
1256    
1257     /*
1258     * compression_level: level of compression for compressed links between
1259     * servers.
1260     *
1261     * values are between: 1 (least compression, fastest)
1262     * and: 9 (most compression, slowest).
1263     */
1264     # compression_level = 6;
1265    
1266     /*
1267     * throttle_time: the minimum amount of time between connections from
1268     * the same ip. exempt {} blocks are excluded from this throttling.
1269     * Offers protection against flooders who reconnect quickly.
1270     * Set to 0 to disable.
1271     */
1272     throttle_time = 0;
1273     };
1274    
1275     glines {
1276     /*
1277     * EFnet Note: This feature is required for European EFnet servers
1278     * and is used by several North American servers. As
1279     * such, it has been left on by default. If you
1280     * do not want your server to participate in G:Lines
1281     * you should disable this.
1282     */
1283    
1284     /* enable: enable glines, network wide temp klines */
1285     enable = yes;
1286    
1287 michael 583 /*
1288     * duration: the amount of time a gline will remain on your
1289     * server before expiring
1290     */
1291 adx 30 duration = 1 day;
1292    
1293 michael 583 /*
1294     * logging: which types of rules you want to log when triggered
1295     * (choose reject or block)
1296     */
1297 adx 30 logging = reject, block;
1298    
1299     /*
1300 michael 583 * NOTE: gline ACLs can cause a desync of glines throughout the
1301     * network, meaning some servers may have a gline triggered, and
1302     * others may not. Also, you only need insert rules for glines
1303     * that you want to block and/or reject. If you want to accept and
1304     * propagate the gline, do NOT put a rule for it.
1305 adx 30 */
1306    
1307     /* user@host for rule to apply to */
1308     user = "god@I.still.hate.packets";
1309     /* server for rule to apply to */
1310     name = "hades.arpa";
1311    
1312     /*
1313     * action: action to take when a matching gline is found. options are:
1314     * reject - do not apply the gline locally
1315     * block - do not propagate the gline
1316     */
1317     action = reject, block;
1318    
1319     user = "god@*";
1320     name = "*";
1321     action = block;
1322     };
1323    
1324     modules {
1325     /*
1326     * module path: other paths to search for modules specified below
1327     * and in /modload.
1328     */
1329 michael 901 path = "@datadir@/modules";
1330     path = "@datadir@/autoload";
1331 adx 30
1332     /* module: the name of a module to load on startup/rehash */
1333     #module = "some_module.so";
1334     };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28