/[svn]/ircd-hybrid-7.2/etc/example.efnet.conf.in
ViewVC logotype

Contents of /ircd-hybrid-7.2/etc/example.efnet.conf.in

Parent Directory Parent Directory | Revision Log Revision Log


Revision 967 - (show annotations)
Sun Aug 2 18:05:28 2009 UTC (11 years ago) by michael
File size: 39236 byte(s)
- added ssl_server_protocol configuration option to servinfo{}.
  valid flags are 'sslv3' and 'tlsv1'

1 /* doc/example.efnet.conf - ircd-hybrid-7 EFnet Example configuration file
2 * Copyright (C) 2000-2009 Hybrid Development Team
3 *
4 * Written by ejb, wcampbel, db, leeh and others
5 * Other example configurations can be found in the source dir under
6 * etc/.
7 *
8 * $Id$
9 */
10
11 /* IMPORTANT NOTES:
12 *
13 * auth {} blocks MUST be specified in order of precedence. The first one
14 * that matches a user will be used. So place spoofs first, then specials,
15 * then general access.
16 *
17 * Shell style (#), C++ style (//) and C style comments are supported.
18 *
19 * Files may be included by either:
20 * .include "filename"
21 * .include <filename>
22 *
23 * Times/durations are written as:
24 * 12 hours 30 minutes 1 second
25 *
26 * Valid units of time:
27 * month, week, day, hour, minute, second
28 *
29 * Valid units of size:
30 * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31 *
32 * Sizes and times may be singular or plural.
33 */
34
35 /* EFNET NOTE:
36 *
37 * This configuration file is a BASIC configuration file for use
38 * on EFnet. You MUST still take the time to set this file up
39 * properly.
40 *
41 * DISCLAIMER: This file was submitted by Disciple@EFnet and has
42 * since been modified by the Hybrid team.
43 */
44
45 /*
46 * serverinfo {}: contains information about the server. (OLD M:)
47 */
48 serverinfo {
49 /*
50 * name: the name of our server. This cannot be changed at runtime.
51 */
52 name = "efnet.irc";
53
54 /*
55 * sid: a server's unique ID. This is three characters long and must
56 * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
57 * a digit, followed by 2 alpha-numerical letters.
58 * NOTE: The letters must be capitalized. This cannot be changed at runtime.
59 */
60 sid = "_CHANGE_ME_";
61
62 /*
63 * description: the description of the server. '[' and ']' may not
64 * be used here for compatibility with older servers.
65 */
66 description = "hybrid-7 test server";
67
68 /*
69 * network info: the name and description of the network this server
70 * is on. Shown in the 005 reply and used with serverhiding.
71 */
72 network_name = "EFnet";
73 network_desc = "Eris Free Network";
74
75 /*
76 * hub: allow this server to act as a hub and have multiple servers
77 * connected to it.
78 */
79 hub = no;
80
81 /*
82 * vhost: the IP to bind to when we connect outward to ipv4 servers.
83 * This should be an ipv4 IP only, or "*" for INADDR_ANY.
84 */
85 #vhost = "192.169.0.1";
86
87 /*
88 * vhost6: the IP to bind to when we connect outward to ipv6 servers.
89 * This should be an ipv6 IP only, or "*" for INADDR_ANY.
90 */
91 #vhost6 = "3ffe:80e8:546::2";
92
93 /* max_clients: the maximum number of clients allowed to connect */
94 max_clients = 512;
95
96 /*
97 * rsa_private_key_file: the path to the file containing our
98 * rsa key for cryptlink.
99 *
100 * Example command to store a 2048 bit RSA keypair in
101 * rsa.key, and the public key in rsa.pub:
102 *
103 * openssl genrsa -out rsa.key 2048
104 * openssl rsa -in rsa.key -pubout -out rsa.pub
105 * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
106 * chmod 0600 rsa.key
107 * chmod 0644 rsa.pub
108 */
109 #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
110
111 /*
112 * ssl_certificate_file: the path to the file containing our
113 * ssl certificate for encrypted client connection.
114 *
115 * This assumes your private RSA key is stored in rsa.key. You
116 * MUST have an RSA key in order to generate the certificate
117 *
118 * openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
119 *
120 * See http://www.openssl.org/docs/HOWTO/certificates.txt
121 *
122 * Please use the following values when generating the cert
123 *
124 * Organization Name: Network Name
125 * Organization Unit Name: changme.someirc.net
126 * Common Name: irc.someirc.net
127 * E-mail: you@domain.com
128 */
129 #ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
130
131 /*
132 * ssl_server_protocol:
133 * SSL/TLS protocols we provide for incoming secure connections.
134 * This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
135 * SSLv2 is not suppported. This cannot be changed at runtime.
136 */
137 #ssl_server_protocol = sslv3, tlsv1;
138 };
139
140 /*
141 * admin {}: contains admin information about the server. (OLD A:)
142 */
143 admin {
144 name = "EFnet Admin";
145 description = "Main Server Administrator";
146 email = "<irc-admin@efnet.irc>";
147 };
148
149 /*
150 * log {}: contains information about logfiles.
151 */
152 log {
153 /* Do you want to enable logging to ircd.log? */
154 use_logging = yes;
155
156 /*
157 * logfiles: the logfiles to use for user connects, /oper uses,
158 * and failed /oper. These files must exist for logging to be used.
159 */
160 fname_userlog = "logs/userlog";
161 fname_operlog = "logs/operlog";
162 fname_killlog = "logs/kill";
163 fname_klinelog = "logs/kline";
164 fname_glinelog = "logs/gline";
165
166 /*
167 * log_level: the amount of detail to log in ircd.log. The
168 * higher, the more information is logged. May be changed
169 * once the server is running via /quote SET LOG. Either:
170 * L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
171 */
172 log_level = L_INFO;
173 };
174
175 /*
176 * class {}: contains information about classes for users (OLD Y:)
177 */
178 class {
179 /* name: the name of the class. classes are text now */
180 name = "users";
181
182 /*
183 * ping_time: how often a client must reply to a PING from the
184 * server before they are dropped.
185 */
186 ping_time = 90 seconds;
187
188 /*
189 * number_per_ip: how many local users are allowed to connect
190 * from one IP (optional)
191 */
192 number_per_ip = 2;
193
194 /*
195 * max_local: how many local users are allowed to connect
196 * from one ident@host (optional)
197 */
198 max_local = 2;
199
200 /*
201 * max_global: network-wide limit of users per ident@host (optional)
202 */
203 max_global = 10;
204
205 /*
206 * max_number: the maximum number of users allowed in this class (optional)
207 */
208 max_number = 100;
209
210 /*
211 * the following lines are optional and allow you to define
212 * how many users can connect from one /NN subnet
213 */
214 cidr_bitlen_ipv4 = 24;
215 cidr_bitlen_ipv6 = 120;
216 number_per_cidr = 16;
217
218 /*
219 * sendq: the amount of data allowed in a clients queue before
220 * they are dropped.
221 */
222 sendq = 100 kbytes;
223 };
224
225 class {
226 name = "opers";
227
228 /*
229 * contrary to seeming popular belief, setting ping time
230 * higher for an oper is NOT doing them a favor.
231 * Since if a link is dead its dead and it means
232 * you have to use another nick long enough to kill the old one :-)
233 * Its much better to use a fairly standard 90 second ping time
234 */
235 ping_time = 90 seconds;
236 number_per_ip = 10;
237 max_number = 100;
238 sendq = 1 mbyte;
239 };
240
241 class {
242 name = "server";
243
244 /*
245 * Same thing here. It's a fallacy to think increasing
246 * ping time for servers is a "good idea." All it leads to
247 * is "ghosting" on one end. Not a good idea.
248 */
249 ping_time = 90 seconds;
250
251 /*
252 * ping_warning: how fast a server must reply to a PING before
253 * a warning to opers is generated.
254 */
255 ping_warning = 15 seconds;
256
257 /*
258 * connectfreq: only used in server classes. Specifies the delay
259 * between autoconnecting to servers.
260 *
261 * Both comstud and I recommend 10 minutes a few years ago.
262 * 15 minutes might be right now. The reason you don't want it too
263 * low is, you make the servers reconnect too quickly with
264 * a large sendq, and they _will_ nick collide. badly. 5 minutes
265 * IS way too short.
266 */
267 connectfreq = 15 minutes;
268
269 /* max number: the amount of servers to autoconnect to */
270 max_number = 1;
271
272 /* sendq: servers need a higher sendq as they send more data */
273 sendq = 15 megabytes;
274 };
275
276 /*
277 * listen {}: contains information about the ports ircd listens on (OLD P:)
278 */
279 listen {
280 /*
281 * port: the specific port to listen on. If no host is specified
282 * before, it will listen on all available IPs.
283 *
284 * Ports are separated via a comma, a range may be specified using ".."
285 */
286
287 /* port: listen on all available IPs, ports 6665 to 6669 */
288 port = 6665 .. 6669;
289
290 /*
291 * Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
292 * unless you are an administrator.
293 *
294 * NOTE: The "flags" directive has to come before "port". Always!
295 *
296 * Currently available flags are:
297 *
298 * ssl - Port is for SSL client connections only
299 * server - Only server connections are permitted
300 * hidden - Port is hidden from /stats P
301 */
302 flags = hidden, ssl;
303 host = "192.168.0.1";
304 port = 6697;
305
306 /*
307 * host: set a specific IP/host the ports after the line will listen
308 * on. This may be ipv4 or ipv6.
309 */
310 host = "1.2.3.4";
311 port = 7000, 7001;
312
313 host = "3ffe:1234:a:b:c::d";
314 port = 7002;
315 };
316
317 /*
318 * auth {}: allow users to connect to the ircd (OLD I:)
319 */
320 auth {
321 /*
322 * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
323 * lines are permitted per auth block.
324 */
325 user = "*@172.16.0.0/12";
326 user = "*test@123D:B567:*";
327
328 /* password: an optional password that is required to use this block */
329 password = "letmein";
330
331 /*
332 * encrypted: controls whether the auth password above has been
333 * encrypted.
334 */
335 encrypted = yes;
336
337 /*
338 * spoof: fake the users host to this. This is free-form,
339 * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
340 */
341 spoof = "I.still.hate.packets";
342
343 /* class: the class the user is placed in */
344 class = "opers";
345
346 /*
347 * need_password: don't allow users who haven't supplied the correct
348 * password to connect using another auth{} block
349 * ('&' prefix on /stats I if disabled)
350 * need_ident: require the user to have identd to connect ('+' prefix on /stats I)
351 * spoof_notice: enable spoofing notification to admins
352 * exceed_limit: allow a user to exceed class limits ('>' prefix on /stats I)
353 * kline_exempt: exempt this user from k/glines ('^' prefix on /stats I)
354 * gline_exempt: exempt this user from glines ('_' prefix on /stats I)
355 * resv_exempt: exempt this user from resvs ('$' prefix on /stats I)
356 * no_tilde: remove ~ from a user with no ident ('-' prefix on /stats I)
357 * can_flood: allow this user to exceed flood limits ('|' prefix on /stats I)
358 * can_idle: exempt this user from idle restrictions ('<' prefix on /stats I)
359 */
360 flags = need_password, spoof_notice, exceed_limit, kline_exempt,
361 gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
362 };
363
364 auth {
365 /*
366 * redirect: the server and port to redirect a user to. A user does
367 * not have to obey the redirection, the ircd just suggests an alternative
368 * server for them.
369 */
370 redirserv = "this.is.not.a.real.server";
371 redirport = 6667;
372
373 user = "*.server";
374
375 /* class: a class is required even though it is not used */
376 class = "users";
377 };
378
379 auth {
380 user = "*@*";
381 class = "users";
382 flags = need_ident;
383 };
384
385 /*
386 * operator {}: defines ircd operators. (OLD O:)
387 *
388 * ircd-hybrid no longer supports local operators, privileges are
389 * controlled via flags.
390 */
391 operator {
392 /* name: the name of the oper */
393 /* NOTE: operator "opername"{} is also supported */
394 name = "god";
395
396 /*
397 * user: the user@host required for this operator. CIDR is not
398 * supported. Multiple user="" lines are supported.
399 */
400 user = "*god@*";
401 user = "*@127.0.0.1";
402
403 /*
404 * password: the password required to oper. By default this will
405 * need to be encrypted using 'mkpasswd'. MD5 is supported.
406 */
407 password = "etcnjl8juSU1E";
408
409 /*
410 * encrypted: controls whether the oper password above has been
411 * encrypted. (OLD CRYPT_OPER_PASSWORD now optional per operator)
412 */
413 encrypted = yes;
414
415 /*
416 * rsa_public_key_file: the public key for this oper when using Challenge.
417 * A password should not be defined when this is used, see
418 * doc/challenge.txt for more information.
419 */
420 # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
421
422 /* class: the class the oper joins when they successfully /oper */
423 class = "opers";
424
425 /*
426 * umodes: default usermodes opers get when they /oper. If defined,
427 * it will override oper_umodes settings in general {}.
428 * Available usermodes:
429 *
430 * +b - bots - See bot and drone flooding notices
431 * +c - cconn - Client connection/quit notices
432 * +C - cconn_full - Client connection/quit notices full
433 * +D - deaf - Don't receive channel messages
434 * +d - debug - See debugging notices
435 * +f - full - See I: line full notices
436 * +G - softcallerid - Server Side Ignore for users not on your channels
437 * +g - callerid - Server Side Ignore (for privmsgs etc)
438 * +i - invisible - Not shown in NAMES or WHO unless you share a
439 * a channel
440 * +k - skill - See server generated KILL messages
441 * +l - locops - See LOCOPS messages
442 * +n - nchange - See client nick changes
443 * +r - rej - See rejected client notices
444 * +s - servnotice - See general server notices
445 * +u - unauth - See unauthorized client notices
446 * +w - wallop - See server generated WALLOPS
447 * +x - external - See remote server connection and split notices
448 * +y - spy - See LINKS, STATS, TRACE notices etc.
449 * +z - operwall - See oper generated WALLOPS
450 */
451 # umodes = locops, servnotice, operwall, wallop;
452
453 /*
454 * privileges: controls the activities and commands an oper is
455 * allowed to do on the server. All options default to no.
456 * Available options:
457 *
458 * global_kill: allows remote users to be /KILL'd (OLD 'O' flag)
459 * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
460 * remoteban: allows remote KLINE/UNKLINE
461 * kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
462 * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
463 * gline: allows GLINE (OLD 'G' flag)
464 * xline: allows XLINE (OLD 'X' flag)
465 * operwall: allows OPERWALL
466 * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
467 * via usermode +n
468 * rehash: allows oper to REHASH config (OLD 'H' flag)
469 * die: allows DIE and RESTART (OLD 'D' flag)
470 * admin: gives admin privileges. admins
471 * may (un)load modules and see the
472 * real IPs of servers.
473 * hidden_admin: same as 'admin', but noone can recognize you as
474 * being an admin
475 * hidden_oper: not shown in /stats p (except for other operators)
476 */
477 /* You can either use
478 * die = yes;
479 * rehash = yes;
480 *
481 * or in a flags statement i.e.
482 * flags = die, rehash;
483 *
484 * You can also negate a flag with ~ i.e.
485 * flags = ~remote;
486 *
487 */
488 flags = global_kill, remote, kline, unkline, xline,
489 die, rehash, nick_changes, admin, operwall;
490 };
491
492 /*
493 * connect {}: controls servers we connect to (OLD C:, N:, H:, L:)
494 */
495 connect {
496 /* name: the name of the server */
497 name = "irc.uplink.com";
498
499 /*
500 * host: the host or IP to connect to. If a hostname is used it
501 * must match the reverse dns of the server.
502 */
503 host = "192.168.0.1";
504
505 /*
506 * vhost: the IP to bind to when we connect outward to servers.
507 * serverinfo::vhost and serverinfo::vhost6 will be overridden
508 * by this directive.
509 */
510 vhost = "192.168.0.2";
511
512 /*
513 * passwords: the passwords we send (OLD C:) and accept (OLD N:).
514 * The remote server will have these passwords reversed.
515 */
516 send_password = "password";
517 accept_password = "anotherpassword";
518
519 /*
520 * encrypted: controls whether the accept_password above has been
521 * encrypted. (OLD CRYPT_LINK_PASSWORD now optional per connect)
522 */
523 encrypted = no;
524
525 /* port: the port to connect to this server on */
526 port = 6666;
527
528 /*
529 * hub_mask: the mask of servers that this server may hub. Multiple
530 * entries are permitted
531 */
532 hub_mask = "*";
533
534 /*
535 * leaf_mask: the mask of servers this server may not hub. Multiple
536 * entries are permitted. Useful for forbidding EU -> US -> EU routes.
537 */
538 # leaf_mask = "*.uk";
539
540 /* fakename: the servername we pretend to be when we connect */
541 # fakename = "*.arpa";
542
543 /* class: the class this server is in */
544 class = "server";
545
546 /*
547 * autoconn: controls whether we autoconnect to this server or not,
548 * dependent on class limits. By default, this is disabled.
549 * compressed: controls whether traffic is compressed via ziplinks.
550 * By default, this is disabled
551 * cryptlink: enable full encryption for all data passing between our
552 * server and this link and rsa authentication.
553 * burst_away: This will send the /away string that users have set
554 * on the server burst. Note this can be a lot of data
555 * and slow down your server burst.
556 * topicburst: Send topics to this server during channel burst. Works
557 * only if the server we are connecting to is capable
558 * of TBURST/TB.
559 */
560 # flags = autoconn, compressed, cryptlink, burst_away, topicburst;
561 };
562
563 connect {
564 name = "encrypted.auth.example";
565 host = "some.host.somewhere";
566 port = 6667;
567
568 flags = cryptlink;
569
570 /*
571 * rsa_public_key_file: the path to the public keyfile of the server.
572 * Used instead of passwords.
573 */
574 rsa_public_key_file = "etc/remote.server.keyfile";
575
576 /*
577 * cipher preference: set the preferred cipher for this link
578 *
579 * Available ciphers are:
580 * BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
581 * RC5.12/128 RC5.8/128 3DES/168 DES/56
582 *
583 * NOTE: Some ciphers may not be supported by your OpenSSL.
584 * Check the output from 'configure' for available ciphers.
585 *
586 * NOTE2: To help you decide what cipher to use, tools/encspeed
587 * will show you approximately how fast each cipher is.
588 * However, blowfish is fast and secure, and is probably
589 * a good default for most situations.
590 *
591 * NOTE3: Default if none is set is BF/128
592 *
593 * The cipher *MUST* be the same in both directions. If you
594 * set a cipher preference, your uplink must set the same cipher,
595 * else it will not link.
596 */
597 # cipher_preference = "BF/168";
598 };
599
600 /*
601 * NOTE: Don't add an extra 'name=' entry if you use
602 * the connect "name"{} feature
603 */
604 connect "ipv6.some.server" {
605 host = "3ffd:dead:beef::1";
606 send_password = "password";
607 accept_password = "password";
608 port = 6666;
609
610 /*
611 * aftype: controls whether the connection uses "ipv4" or "ipv6".
612 * Default is ipv4.
613 */
614 aftype = ipv6;
615 class = "server";
616 };
617
618 /*
619 * cluster {}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
620 * automatically (OLD hyb6 SLAVE_SERVERS)
621 */
622 cluster {
623 /*
624 * name: the server to share with, this can take wildcards
625 *
626 * NOTE: only local actions will be clustered, meaning if
627 * the server receives a shared kline/unkline/etc, it
628 * will not be propagated to clustered servers.
629 *
630 * Remote servers are not necessarily required to accept
631 * clustered lines, they need a shared{} for *THIS* server
632 * in order to accept them.
633 */
634 name = "*.arpa";
635
636 /*
637 * type: list of what to share, options are as follows:
638 * kline - share klines
639 * tkline - share temporary klines
640 * unkline - share unklines
641 * xline - share xlines
642 * txline - share temporary xlines
643 * unxline - share unxlines
644 * resv - share resvs
645 * tresv - share temporary resvs
646 * unresv - share unresvs
647 * locops - share locops
648 * all - share all of the above (default)
649 */
650 type = kline, unkline, locops, xline, resv;
651 };
652
653 /*
654 * shared {}: users that are allowed to remote kline (OLD U:)
655 *
656 * NOTE: This can be effectively used for remote klines.
657 * Please note that there is no password authentication
658 * for users setting remote klines. You must also be
659 * /oper'd in order to issue a remote kline.
660 */
661 shared {
662 /*
663 * name: the server the user must be on to set klines. If this is not
664 * specified, the user will be allowed to kline from all servers.
665 */
666 name = "irc2.some.server";
667
668 /*
669 * user: the user@host mask that is allowed to set klines. If this is
670 * not specified, all users on the server above will be allowed to set
671 * a remote kline.
672 */
673 user = "oper@my.host.is.spoofed";
674
675 /*
676 * type: list of what to share, options are as follows:
677 * kline - allow oper/server to kline
678 * tkline - allow temporary klines
679 * unkline - allow oper/server to unkline
680 * xline - allow oper/server to xline
681 * txline - allow temporary xlines
682 * unxline - allow oper/server to unxline
683 * resv - allow oper/server to resv
684 * tresv - allow temporary resvs
685 * unresv - allow oper/server to unresv
686 * locops - allow oper/server to locops - only used for servers that cluster
687 * all - allow oper/server to do all of the above (default)
688 */
689 type = kline, unkline, resv;
690 };
691
692 /*
693 * kill {}: users that are not allowed to connect (OLD K:)
694 * Oper issued klines will be added to the specified kline config
695 */
696 kill {
697 user = "bad@*.hacked.edu";
698 reason = "Obviously hacked account";
699 };
700
701 kill {
702 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
703
704 /*
705 * NOTE: You have to set type=regex; when using a regular expression
706 * based user entry
707 */
708 type = regex;
709 };
710
711 /*
712 * deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
713 * Oper issued dlines will be added to the specified dline config
714 */
715 deny {
716 ip = "10.0.1.0/24";
717 reason = "Reconnecting vhosted bots";
718 };
719
720 /*
721 * exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:)
722 *
723 * EFnet Note: We really suggest to enable general::stats_e_disabled
724 * if you plan to exempt EFnet server IPs you don't want to show to
725 * other operators and/or administrators through "STATS e".
726 */
727 exempt {
728 ip = "192.168.0.0/16";
729 };
730
731 /*
732 * resv {}: nicks and channels users may not use/join (OLD Q:)
733 */
734 resv {
735 /* reason: the reason for the proceeding resv's */
736 reason = "There are no services on this network";
737
738 /* resv: the nicks and channels users may not join/use */
739 nick = "nickserv";
740 nick = "chanserv";
741 nick = "operserv";
742 nick = "JUPES";
743 nick = "JUPE";
744 nick = "CH?NF?X"; # CHANFIX (services.int)
745
746 /* These are totally optional, but may be a good idea */
747 nick = "oper";
748 nick = "ircop";
749 nick = "op";
750 nick = "ident";
751 nick = "pass";
752 channel = "#jupedchan";
753
754 /* resv: wildcard masks are also supported in nicks only */
755 reason = "Clone bots";
756 nick = "clone*";
757 };
758
759 /*
760 * gecos {}: The X: replacement, used for banning users based on
761 * their "realname".
762 */
763 gecos {
764 name = "*sex*";
765 reason = "Possible spambot";
766 };
767
768 gecos {
769 name = "sub7server";
770 reason = "Trojan drone";
771 };
772
773 gecos {
774 name = "*http*";
775 reason = "Spambot";
776 };
777
778 gecos {
779 name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
780
781 /*
782 * NOTE: You have to set type=regex; when using a regular expression
783 * based name entry
784 */
785 type = regex;
786 };
787
788 /*
789 * channel {}: The channel block contains options pertaining to channels
790 */
791 channel {
792 /*
793 * disable_fake_channels: this option, if set to 'yes', will
794 * disallow clients to create or join channels that have one
795 * of the following ASCII characters in their name:
796 *
797 * 2 | bold
798 * 3 | mirc color
799 * 15 | plain text
800 * 22 | reverse
801 * 31 | underline
802 * 160 | non-breaking space
803 */
804 disable_fake_channels = yes;
805
806 /*
807 * restrict_channels: reverse channel RESVs logic, only reserved
808 * channels are allowed
809 */
810 restrict_channels = no;
811
812 /*
813 * disable_local_channels: prevent users from joining &channels.
814 */
815 disable_local_channels = no;
816
817 /*
818 * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
819 * that can join a +i channel without an invite.
820 */
821 use_invex = yes;
822
823 /*
824 * use_except: Enable/disable channel mode +e, a n!u@h list of masks
825 * that can join a channel through a ban (+b).
826 */
827 use_except = yes;
828
829 /*
830 * use_knock: Allows users to request an invite to a channel that
831 * is locked somehow (+ikl). If the channel is +p or you are banned
832 * the knock will not be sent.
833 *
834 * EFnet Note: This seems to be used mostly by European servers
835 * and not North American ones.
836 * Please feel free to disable this if you do not
837 * want to run channel knock.
838 * channel knock allows an user to "/quote knock #channel"
839 * to ask for an invite. It is typically used in eu-efnet
840 * to ask for an invite to #eu-opers.
841 * A user who is banned will not have their knock
842 * sent to channel. It is paced, so knock will not
843 * cause a flood.
844 */
845 use_knock = yes;
846
847 /*
848 * knock_delay: The amount of time a user must wait between issuing
849 * the knock command.
850 */
851 knock_delay = 5 minutes;
852
853 /*
854 * knock_delay_channel: How often a knock to any specific channel
855 * is permitted, regardless of the user sending the knock.
856 */
857 knock_delay_channel = 1 minute;
858
859 /*
860 * burst_topicwho: enable sending of who set topic on topicburst
861 * default is yes
862 */
863 burst_topicwho = yes;
864
865 /*
866 * max_chans_per_user: The maximum number of channels a user can
867 * join/be on.
868 */
869 max_chans_per_user = 25;
870
871 /* quiet_on_ban: stop banned people talking in channels. */
872 quiet_on_ban = yes;
873
874 /* max_bans: maximum number of +b/e/I modes in a channel */
875 max_bans = 100;
876
877 /*
878 * how many joins in how many seconds constitute a flood, use 0 to
879 * disable. +b opers will be notified (changeable via /set)
880 */
881 join_flood_count = 16;
882 join_flood_time = 8 seconds;
883
884 /*
885 * splitcode: The ircd will now check splitmode every few seconds.
886 *
887 * Either split users or split servers can activate splitmode, but
888 * both conditions must be met for the ircd to deactivate splitmode.
889 *
890 * You may force splitmode to be permanent by /quote set splitmode on
891 */
892
893 /*
894 * default_split_user_count: when the usercount is lower than this level,
895 * consider ourselves split. This must be set for automatic splitmode.
896 */
897 default_split_user_count = 40000;
898
899 /*
900 * default_split_server_count: when the servercount is lower than this,
901 * consider ourselves split. This must be set for automatic splitmode.
902 */
903 default_split_server_count = 10;
904
905 /* no_create_on_split: disallow users creating channels on split. */
906 no_create_on_split = yes;
907
908 /* no_join_on_split: disallow users joining channels at all on a split. */
909 no_join_on_split = no;
910 };
911
912 /*
913 * serverhide {}: The serverhide block contains the options regarding
914 * serverhiding
915 */
916 serverhide {
917 /*
918 * flatten_links: this option will show all servers in /links appear
919 * that they are linked to this current server
920 *
921 * EFnet Note: While this is not a requirement on EFnet, it
922 * may be a good idea. Except, it's useless
923 * unless the entire net runs it.
924 */
925 flatten_links = no;
926
927 /*
928 * links_delay: how often to update the links file when it is
929 * flattened.
930 */
931 links_delay = 5 minutes;
932
933 /*
934 * hidden: hide this server from a /links output on servers that
935 * support it. This allows hub servers to be hidden etc.
936 */
937 hidden = no;
938
939 /*
940 * disable_hidden: prevent servers hiding themselves from a
941 * /links output.
942 */
943 disable_hidden = no;
944
945 /*
946 * hide_servers: hide remote servernames everywhere and instead use
947 * hidden_name and network_desc.
948 */
949 hide_servers = no;
950
951 /*
952 * Use this as the servername users see if hide_servers = yes.
953 */
954 hidden_name = "*.hidden.com";
955
956 /*
957 * hide_server_ips: If this is disabled, opers will be unable to see
958 * servers ips and will be shown a masked ip, admins will be shown the
959 * real ip.
960 *
961 * If this is enabled, nobody can see a servers ip. *This is a kludge*,
962 * it has the side effect of hiding the ips everywhere, including
963 * logfiles.
964 *
965 * We recommend you leave this disabled, and just take care with who you
966 * give admin=yes; to.
967 */
968 hide_server_ips = yes;
969 };
970
971 /*
972 * general {}: The general block contains many of the options that were once
973 * compiled in options in config.h. The general block is read at start time.
974 */
975 general {
976 /* max_watch: maximum WATCH entries a client can have. */
977 max_watch = 64;
978
979 /*
980 * gline_min_cidr: the minimum required length of a CIDR bitmask
981 * for IPv4 based glines
982 */
983 gline_min_cidr = 16;
984
985 /*
986 * gline_min_cidr6: the minimum required length of a CIDR bitmask
987 * for IPv6 based glines
988 */
989 gline_min_cidr6 = 48;
990
991 /*
992 * Whether to automatically set mode +i on connecting users.
993 */
994 invisible_on_connect = yes;
995
996 /*
997 * If you don't explicitly specify burst_away in your connect blocks, then
998 * they will default to the burst_away value below.
999 */
1000 burst_away = no;
1001
1002 /*
1003 * Show "actually using host <ip>" on /whois when possible.
1004 */
1005 use_whois_actually = yes;
1006
1007 /*
1008 * Max time from the nickname change that still causes KILL
1009 * automatically to switch for the current nick of that user. (seconds)
1010 */
1011 kill_chase_time_limit = 90;
1012
1013 /*
1014 * If hide_spoof_ips is disabled, opers will be allowed to see the real
1015 * IP of spoofed users in /trace etc. If this is defined they will be
1016 * shown a masked IP.
1017 */
1018 hide_spoof_ips = yes;
1019
1020 /*
1021 * Ignore bogus timestamps from other servers. Yes, this will desync
1022 * the network, but it will allow chanops to resync with a valid non TS 0
1023 *
1024 * This should be enabled network wide, or not at all.
1025 */
1026 ignore_bogus_ts = no;
1027
1028 /*
1029 * disable_auth: completely disable ident lookups; if you enable this,
1030 * be careful of what you set need_ident to in your auth {} blocks
1031 */
1032 disable_auth = no;
1033
1034 /* disable_remote_commands: disable users doing commands on remote servers */
1035 disable_remote_commands = no;
1036
1037 /*
1038 * tkline_expire_notices: enables or disables temporary kline/xline
1039 * expire notices.
1040 */
1041 tkline_expire_notices = no;
1042
1043 /*
1044 * default_floodcount: the default value of floodcount that is configurable
1045 * via /quote set floodcount. This is the amount of lines a user
1046 * may send to any other user/channel in one second.
1047 */
1048 default_floodcount = 10;
1049
1050 /*
1051 * failed_oper_notice: send a notice to all opers on the server when
1052 * someone tries to OPER and uses the wrong password, host or ident.
1053 */
1054 failed_oper_notice = yes;
1055
1056 /*
1057 * dots_in_ident: the amount of '.' characters permitted in an ident
1058 * reply before the user is rejected.
1059 */
1060 dots_in_ident = 2;
1061
1062 /*
1063 * dot_in_ip6_addr: ircd-hybrid-6.0 and earlier will disallow hosts
1064 * without a '.' in them. This will add one to the end. Only needed
1065 * for older servers.
1066 */
1067 dot_in_ip6_addr = no;
1068
1069 /*
1070 * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1071 * placed via the server. klines hand placed are exempt from limits.
1072 * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1073 */
1074 min_nonwildcard = 3;
1075
1076 /*
1077 * min_nonwildcard_simple: the minimum non wildcard characters in
1078 * gecos bans. wildcard chars: '*' '?' '#'
1079 */
1080 min_nonwildcard_simple = 3;
1081
1082 /* max_accept: maximum allowed /accept's for +g usermode */
1083 max_accept = 20;
1084
1085 /* anti_nick_flood: enable the nickflood control code */
1086 anti_nick_flood = yes;
1087
1088 /* nick flood: the nick changes allowed in the specified period */
1089 max_nick_time = 20 seconds;
1090 max_nick_changes = 5;
1091
1092 /*
1093 * anti_spam_exit_message_time: the minimum time a user must be connected
1094 * before custom quit messages are allowed.
1095 */
1096 anti_spam_exit_message_time = 5 minutes;
1097
1098 /*
1099 * ts delta: the time delta allowed between server clocks before
1100 * a warning is given, or before the link is dropped. all servers
1101 * should run ntpdate/rdate to keep clocks in sync
1102 */
1103 ts_warn_delta = 30 seconds;
1104 ts_max_delta = 5 minutes;
1105
1106 /*
1107 * kline_with_reason: show the user the reason why they are k/d/glined
1108 * on exit. May give away who set k/dline when set via tcm.
1109 */
1110 kline_with_reason = yes;
1111
1112 /*
1113 * kline_reason: show this message to users on channel
1114 * instead of the oper reason.
1115 */
1116 kline_reason = "Connection closed";
1117
1118 /*
1119 * reject_hold_time: wait this amount of time before disconnecting
1120 * a rejected client. Use 0 to disable.
1121 */
1122 reject_hold_time = 30 seconds;
1123
1124 /*
1125 * warn_no_nline: warn opers about servers that try to connect but
1126 * we don't have a connect {} block for. Twits with misconfigured
1127 * servers can get really annoying with this enabled.
1128 */
1129 warn_no_nline = yes;
1130
1131 /*
1132 * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1133 * operators and administrators. Doing so is a good idea in case
1134 * there are any exempted (exempt{}) server IPs you don't want to
1135 * see leaked.
1136 */
1137 stats_e_disabled = no;
1138
1139 /* stats_o_oper only: make stats o (opers) oper only */
1140 stats_o_oper_only = yes;
1141
1142 /* stats_P_oper_only: make stats P (ports) oper only */
1143 stats_P_oper_only = yes;
1144
1145 /*
1146 * stats i oper only: make stats i (auth {}) oper only. set to:
1147 * yes: show users no auth blocks, made oper only.
1148 * masked: show users first matching auth block
1149 * no: show users all auth blocks.
1150 */
1151 stats_i_oper_only = yes;
1152
1153 /*
1154 * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1155 * yes: show users no auth blocks, made oper only
1156 * masked: show users first matching auth block
1157 * no: show users all auth blocks.
1158 */
1159 stats_k_oper_only = yes;
1160
1161 /*
1162 * caller_id_wait: time between notifying a +g user that somebody
1163 * is messaging them.
1164 */
1165 caller_id_wait = 1 minute;
1166
1167 /*
1168 * opers_bypass_callerid: allows operators to bypass +g and message
1169 * anyone who has it set (useful if you use services).
1170 */
1171 opers_bypass_callerid = no;
1172
1173 /*
1174 * pace_wait_simple: time between use of less intensive commands
1175 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1176 */
1177 pace_wait_simple = 1 second;
1178
1179 /*
1180 * pace_wait: time between more intensive commands
1181 * (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1182 */
1183 pace_wait = 10 seconds;
1184
1185 /*
1186 * short_motd: send clients a notice telling them to read the motd
1187 * instead of forcing a motd to clients who may simply ignore it.
1188 */
1189 short_motd = no;
1190
1191 /*
1192 * ping_cookie: require clients to respond exactly to a ping command,
1193 * can help block certain types of drones and FTP PASV mode spoofing.
1194 */
1195 ping_cookie = no;
1196
1197 /* no_oper_flood: increase flood limits for opers. */
1198 no_oper_flood = yes;
1199
1200 /*
1201 * true_no_oper_flood: completely eliminate flood limits for opers
1202 * and for clients with can_flood = yes in their auth {} blocks
1203 */
1204 true_no_oper_flood = yes;
1205
1206 /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1207 oper_pass_resv = yes;
1208
1209 /*
1210 * idletime: the maximum amount of time a user may idle before
1211 * they are disconnected
1212 */
1213 idletime = 0;
1214
1215 /* REMOVE ME. The following line checks you've been reading. */
1216 havent_read_conf = 1;
1217
1218 /*
1219 * max_targets: the maximum amount of targets in a single
1220 * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1221 */
1222 max_targets = 4;
1223
1224 /*
1225 * client_flood: maximum amount of data in a clients queue before
1226 * they are dropped for flooding.
1227 */
1228 client_flood = 2560 bytes;
1229
1230 /*
1231 * message_locale: the default message locale
1232 * Use "standard" for the compiled in defaults.
1233 * To install the translated messages, go into messages/ in the
1234 * source directory and run `make install'.
1235 */
1236 message_locale = "standard";
1237
1238 /*
1239 * usermodes configurable: a list of usermodes for the options below
1240 *
1241 * +b - bots - See bot and drone flooding notices
1242 * +c - cconn - Client connection/quit notices
1243 * +C - cconn_full - Client connection/quit notices full
1244 * +D - deaf - Don't receive channel messages
1245 * +d - debug - See debugging notices
1246 * +f - full - See I: line full notices
1247 * +G - softcallerid - Server Side Ignore for users not on your channels
1248 * +g - callerid - Server Side Ignore (for privmsgs etc)
1249 * +i - invisible - Not shown in NAMES or WHO unless you share a
1250 * a channel
1251 * +k - skill - See server generated KILL messages
1252 * +l - locops - See LOCOPS messages
1253 * +n - nchange - See client nick changes
1254 * +r - rej - See rejected client notices
1255 * +s - servnotice - See general server notices
1256 * +u - unauth - See unauthorized client notices
1257 * +w - wallop - See server generated WALLOPS
1258 * +x - external - See remote server connection and split notices
1259 * +y - spy - See LINKS, STATS, TRACE notices etc.
1260 * +z - operwall - See oper generated WALLOPS
1261 */
1262
1263 /* oper_only_umodes: usermodes only opers may set */
1264 oper_only_umodes = bots, cconn, cconn_full, debug, full, skill,
1265 nchange, rej, spy, external, operwall,
1266 locops, unauth;
1267
1268 /* oper_umodes: default usermodes opers get when they /oper */
1269 oper_umodes = bots, locops, servnotice, operwall, wallop;
1270
1271 /*
1272 * servlink_path: path to 'servlink' program used by ircd to handle
1273 * encrypted/compressed server <-> server links.
1274 *
1275 * only define if servlink is not in same directory as ircd itself.
1276 */
1277 #servlink_path = "/usr/local/ircd/bin/servlink";
1278
1279 /*
1280 * default_cipher_preference: default cipher to use for cryptlink when none is
1281 * specified in connect block.
1282 */
1283 #default_cipher_preference = "BF/168";
1284
1285 /*
1286 * use_egd: if your system does not have *random devices yet you
1287 * want to use OpenSSL and encrypted links, enable this. Beware -
1288 * EGD is *very* CPU intensive when gathering data for its pool
1289 */
1290 # use_egd = yes;
1291
1292 /*
1293 * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1294 * which automatically finds the path.
1295 */
1296 # egdpool_path = "/var/run/egd-pool";
1297
1298
1299 /*
1300 * compression_level: level of compression for compressed links between
1301 * servers.
1302 *
1303 * values are between: 1 (least compression, fastest)
1304 * and: 9 (most compression, slowest).
1305 */
1306 # compression_level = 6;
1307
1308 /*
1309 * throttle_time: the minimum amount of time between connections from
1310 * the same ip. exempt {} blocks are excluded from this throttling.
1311 * Offers protection against flooders who reconnect quickly.
1312 * Set to 0 to disable.
1313 */
1314 throttle_time = 0;
1315 };
1316
1317 glines {
1318 /*
1319 * EFnet Note: This feature is required for European EFnet servers
1320 * and is used by several North American servers. As
1321 * such, it has been left on by default. If you
1322 * do not want your server to participate in G:Lines
1323 * you should disable this.
1324 */
1325
1326 /* enable: enable glines, network wide temp klines */
1327 enable = yes;
1328
1329 /*
1330 * duration: the amount of time a gline will remain on your
1331 * server before expiring
1332 */
1333 duration = 1 day;
1334
1335 /*
1336 * logging: which types of rules you want to log when triggered
1337 * (choose reject or block)
1338 */
1339 logging = reject, block;
1340
1341 /*
1342 * NOTE: gline ACLs can cause a desync of glines throughout the
1343 * network, meaning some servers may have a gline triggered, and
1344 * others may not. Also, you only need insert rules for glines
1345 * that you want to block and/or reject. If you want to accept and
1346 * propagate the gline, do NOT put a rule for it.
1347 */
1348
1349 /* user@host for rule to apply to */
1350 user = "god@I.still.hate.packets";
1351 /* server for rule to apply to */
1352 name = "hades.arpa";
1353
1354 /*
1355 * action: action to take when a matching gline is found. options are:
1356 * reject - do not apply the gline locally
1357 * block - do not propagate the gline
1358 */
1359 action = reject, block;
1360
1361 user = "god@*";
1362 name = "*";
1363 action = block;
1364 };
1365
1366 modules {
1367 /*
1368 * path: other paths to search for modules specified below
1369 * and in /modload.
1370 */
1371 path = "@LIBDIR@/modules";
1372 path = "@LIBDIR@/modules/autoload";
1373
1374 /* module: the name of a module to load on startup/rehash */
1375 #module = "some_module.so";
1376 };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28