/[svn]/ircd-hybrid-7.2/etc/example.efnet.conf.in
ViewVC logotype

Contents of /ircd-hybrid-7.2/etc/example.efnet.conf.in

Parent Directory Parent Directory | Revision Log Revision Log


Revision 40 - (show annotations)
Sun Oct 2 22:39:02 2005 UTC (14 years, 9 months ago) by adx
Original Path: ircd-hybrid-7.2/etc/example.efnet.conf
File size: 35848 byte(s)
- documented cidr_bitlen

1 /* doc/example.efnet.conf - ircd-hybrid-7 EFnet Example configuration file
2 * Copyright (C) 2000-2005 Hybrid Development Team
3 *
4 * Written by ejb, wcampbel, db, leeh and others
5 * Other example configurations can be found in the source dir under
6 * etc/.
7 *
8 * $Id$
9 */
10
11 /* IMPORTANT NOTES:
12 *
13 * auth {} blocks MUST be specified in order of precedence. The first one
14 * that matches a user will be used. So place spoofs first, then specials,
15 * then general access.
16 *
17 * Shell style (#), C++ style (//) and C style comments are supported.
18 *
19 * Files may be included by either:
20 * .include "filename"
21 * .include <filename>
22 *
23 * Times/durations are written as:
24 * 12 hours 30 minutes 1 second
25 *
26 * Valid units of time:
27 * month, week, day, hour, minute, second
28 *
29 * Valid units of size:
30 * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31 *
32 * Sizes and times may be singular or plural.
33 */
34
35 /* EFNET NOTE:
36 *
37 * This configuration file is a BASIC configuration file for use
38 * on EFnet. You MUST still take the time to set this file up
39 * properly.
40 *
41 * DISCLAIMER: This file was submitted by Disciple@EFnet and has
42 * since been modified by the Hybrid team.
43 */
44
45 /* serverinfo {}: Contains information about the server. (OLD M:) */
46 serverinfo {
47 /* name: the name of our server */
48 name = "efnet.irc";
49
50 /*
51 * A server's unique ID. This is three characters long and must be in
52 * the form [0-9][A-Z0-9][A-Z0-9]. The first character must be a
53 * digit, followed by 2 alpha-numerical letters.
54 * Note: The letters must be capitalized.
55 */
56 sid = "_CHANGE_ME_";
57
58 /*
59 * description: the description of the server. '[' and ']' may not
60 * be used here for compatibility with older servers.
61 */
62 description = "hybrid-7 test server";
63
64 /*
65 * network info: the name and description of the network this server
66 * is on. Shown in the 005 reply and used with serverhiding.
67 */
68 network_name = "EFnet";
69 network_desc = "Eris Free Network";
70
71 /*
72 * hub: allow this server to act as a hub and have multiple servers
73 * connected to it. This may not be changed if there are active
74 * LazyLink servers.
75 */
76 hub = no;
77
78 /*
79 * vhost: the IP to bind to when we connect outward to ipv4 servers.
80 * This should be an ipv4 IP only, or "* for INADDR_ANY.
81 */
82 #vhost = "192.169.0.1";
83
84 /*
85 * vhost6: the IP to bind to when we connect outward to ipv6 servers.
86 * This should be an ipv6 IP only, or "* for INADDR_ANY.
87 */
88 #vhost6 = "3ffe:80e8:546::2";
89
90 /* max_clients: the maximum number of clients allowed to connect */
91 max_clients = 512;
92
93 /*
94 * rsa key: the path to the file containing our rsa key for cryptlink.
95 *
96 * Example command to store a 2048 bit RSA keypair in
97 * rsa.key, and the public key in rsa.pub:
98 *
99 * openssl genrsa -out rsa.key 2048
100 * openssl rsa -in rsa.key -pubout -out rsa.pub
101 * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
102 * chmod 0600 rsa.key
103 * chmod 0644 rsa.pub
104 */
105 #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
106 };
107
108 /* admin {}: contains admin information about the server. (OLD A:) */
109 admin {
110 name = "EFnet Admin";
111 description = "Main Server Administrator";
112 email = "<irc-admin@efnet.irc>";
113 };
114
115 /* logging {}: contains information about logfiles. */
116 logging {
117 /* Do you want to enable logging to ircd.log? */
118 use_logging = yes;
119
120 /*
121 * logfiles: the logfiles to use for user connects, /oper uses,
122 * and failed /oper. These files must exist for logging to be used.
123 */
124 fuserlog = "logs/userlog";
125 foperlog = "logs/operlog";
126 ffailed_operlog = "logs/foperlog";
127
128 /*
129 * log level: the amount of detail to log in ircd.log. The
130 * higher, the more information is logged. May be changed
131 * once the server is running via /quote SET LOG. Either:
132 * L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
133 */
134 log_level = L_INFO;
135 };
136
137 /* class {}: contain information about classes for users (OLD Y:) */
138 class {
139 /* name: the name of the class. classes are text now */
140 name = "users";
141
142 /*
143 * ping_time: how often a client must reply to a PING from the
144 * server before they are dropped.
145 */
146 ping_time = 90 seconds;
147
148 /* how many local users are allowed to connect from one IP */
149 number_per_ip = 2;
150
151 /* how many local users are allowed to connect from one ident@host */
152 max_local = 2;
153
154 /* network-wide limit of users per ident@host */
155 max_global = 10;
156
157 /* max_number: the maximum number of users allowed in this class */
158 max_number = 100;
159
160 /*
161 * the following lines are optional and allow you to define
162 * how many users can connect from one /NN subnet
163 */
164 cidr_bitlen_ipv4 = 24;
165 cidr_bitlen_ipv6 = 120;
166 number_per_cidr = 16;
167
168 /*
169 * sendq: the amount of data allowed in a clients queue before
170 * they are dropped.
171 */
172 sendq = 100 kbytes;
173 };
174
175 class {
176 name = "opers";
177
178 /*
179 * contrary to seeming popular belief, setting ping time
180 * higher for an oper is NOT doing them a favor.
181 * Since if a link is dead its dead and it means
182 * you have to use another nick long enough to kill the old one :-)
183 * Its much better to use a fairly standard 90 second ping time
184 */
185 ping_time = 90 seconds;
186 number_per_ip = 10;
187 max_number = 100;
188 sendq = 1 mbyte;
189 };
190
191 class {
192 name = "server";
193
194 /*
195 * Same thing here. Its a fallacy to think increasing
196 * ping time for servers is a "good idea." All it leads to
197 * is "ghosting" on one end. Not a good idea.
198 */
199 ping_time = 90 seconds;
200
201 /*
202 * ping_warning: how fast a server must reply to a PING before
203 * a warning to opers is generated.
204 */
205 ping_warning = 5 seconds;
206
207 /*
208 * connectfreq: only used in server classes. Specifies the delay
209 * between autoconnecting to servers.
210 *
211 * Both comstud and I recommend 10 minutes a few years ago.
212 * 15 minutes might be right now. The reason you don't want it too
213 * low is, you make the servers reconnect too quickly with
214 * a large sendq, and they _will_ nick collide. badly. 5 minutes
215 * IS way too short.
216 */
217 connectfreq = 15 minutes;
218
219 /* max number: the amount of servers to autoconnect to */
220 max_number = 1;
221
222 /* sendq: On big nets this needs to be a reasonably large value */
223 sendq = 15 megabytes;
224 };
225
226 /* listen {}: contain information about the ports ircd listens on (OLD P:) */
227 listen {
228 /*
229 * port: the specific port to listen on. If no host is specified
230 * before, it will listen on all available IPs.
231 *
232 * Ports are separated via a comma, a range may be specified using ".."
233 */
234
235 /* port: listen on all available IPs, ports 6665 to 6669 */
236 port = 6665 .. 6669;
237
238 /*
239 * Listen on 192.168.0.1/7023 and hidden from STATS P
240 * unless you are an administrator.
241 *
242 * NOTE: The "flags" directive has to come before "port". Always!
243 */
244 flags = hidden;
245 host = "192.168.0.1";
246 port = 7023;
247
248 /*
249 * host: set a specific IP/host the ports after the line will listen
250 * on. This may be ipv4 or ipv6.
251 */
252 host = "1.2.3.4";
253 port = 7000, 7001;
254
255 host = "3ffe:1234:a:b:c::d";
256 port = 7002;
257 };
258
259 /* auth {}: allow users to connect to the ircd (OLD I:) */
260 auth {
261 /*
262 * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
263 * lines are permitted per auth block.
264 */
265 user = "*@172.16.0.0/12";
266 user = "*test@123D:B567:*";
267
268 /* password: an optional password that is required to use this block */
269 password = "letmein";
270
271 /*
272 * encrypted: controls whether the auth password above has been
273 * encrypted.
274 */
275 encrypted = yes;
276
277 /*
278 * spoof: fake the users host to this. This is free-form,
279 * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
280 */
281 spoof = "I.still.hate.packets";
282
283 /* class: the class the user is placed in */
284 class = "opers";
285
286 /*
287 * need_password: don't allow users who haven't supplied the correct
288 * password to connect using another auth{} block
289 * ('&' prefix on /stats I if disabled)
290 * need_ident: require the user to have identd to connect ('+' prefix on /stats I)
291 * spoof_notice: enable spoofing notification to admins
292 * exceed_limit: allow a user to exceed class limits ('>' prefix on /stats I)
293 * kline_exempt: exempt this user from k/glines ('^' prefix on /stats I)
294 * gline_exempt: exempt this user from glines ('_' prefix on /stats I)
295 * resv_exempt: exempt this user from resvs ('$' prefix on /stats I)
296 * no_tilde: remove ~ from a user with no ident ('-' prefix on /stats I)
297 * can_flood: allow this user to exceed flood limits ('|' prefix on /stats I)
298 * can_idle: exempt this use from idle restrictions ('<' prefix on /stats I)
299 */
300 flags = need_password, spoof_notice, exceed_limit, kline_exempt,
301 gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
302 };
303
304 auth {
305 /*
306 * redirect: the server and port to redirect a user to. A user does
307 * not have to obey the redirection, the ircd just suggests an alternative
308 * server for them.
309 */
310 redirserv = "irc.fi";
311 redirport = 6667;
312
313 user = "*.fi";
314
315 /* class: a class is required even though it is not used */
316 class = "users";
317 };
318
319 auth {
320 user = "*@*";
321 class = "users";
322 flags = need_ident;
323 };
324
325 /* operator {}: defines ircd operators. (OLD O:)
326 * ircd-hybrid no longer supports local operators, privileges are
327 * controlled via flags.
328 */
329 operator {
330 /* name: the name of the oper */
331 /* Note: operator "opername"{} is also supported */
332 name = "god";
333
334 /*
335 * user: the user@host required for this operator. CIDR is not
336 * supported. Multiple user="" lines are supported.
337 */
338 user = "*god@*";
339 user = "*@127.0.0.1";
340
341 /*
342 * password: the password required to oper. By default this will
343 * need to be encrypted using 'mkpasswd'. MD5 is supported.
344 */
345 password = "etcnjl8juSU1E";
346
347 /*
348 * encrypted: controls whether the oper password above has been
349 * encrypted. (OLD CRYPT_OPER_PASSWORD now optional per operator)
350 */
351 encrypted = yes;
352
353 /*
354 * rsa_public_key_file: the public key for this oper when using Challenge.
355 * A password should not be defined when this is used, see
356 * doc/challenge.txt for more information.
357 */
358 # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
359
360 /* class: the class the oper joins when they successfully /oper */
361 class = "opers";
362
363 /*
364 * privileges: controls the activities and commands an oper is
365 * allowed to do on the server. All options default to no.
366 * Available options:
367 *
368 * global_kill: allows remote users to be /KILL'd (OLD 'O' flag)
369 * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
370 * remoteban: allows remote KLINE/UNKLINE
371 * kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
372 * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
373 * gline: allows GLINE (OLD 'G' flag)
374 * xline: allows XLINE (OLD 'X' flag)
375 * operwall: allows OPERWALL
376 * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
377 * via usermode +n
378 * rehash: allows oper to REHASH config (OLD 'H' flag)
379 * die: allows DIE and RESTART (OLD 'D' flag)
380 * admin: gives admin privileges. admins
381 * may (un)load modules and see the
382 * real IPs of servers.
383 * hidden_admin: same as 'admin', but noone can recognize you as
384 * being an admin
385 * hidden_oper: not shown in /stats p (except for other operators)
386 */
387 /* You can either use
388 * die = yes;
389 * rehash = yes;
390 *
391 * or in a flags statement i.e.
392 * flags = die, rehash;
393 *
394 * You can also negate a flag with ~ i.e.
395 * flags = ~remote;
396 *
397 */
398 flags = global_kill, remote, kline, unkline, xline,
399 die, rehash, nick_changes, admin, operwall;
400 };
401
402 /* connect {}: controls servers we connect to (OLD C:, N:, H:, L:) */
403 connect {
404 /* name: the name of the server */
405 name = "irc.uplink.com";
406
407 /*
408 * host: the host or IP to connect to. If a hostname is used it
409 * must match the reverse dns of the server.
410 */
411 host = "192.168.0.1";
412
413 /*
414 * passwords: the passwords we send (OLD C:) and accept (OLD N:).
415 * The remote server will have these passwords reversed.
416 */
417 send_password = "password";
418 accept_password = "anotherpassword";
419
420 /*
421 * encrypted: controls whether the accept_password above has been
422 * encrypted. (OLD CRYPT_LINK_PASSWORD now optional per connect)
423 */
424 encrypted = no;
425
426 /* port: the port to connect to this server on */
427 port = 6666;
428
429 /*
430 * hub_mask: the mask of servers that this server may hub. Multiple
431 * entries are permitted
432 */
433 hub_mask = "*";
434
435 /*
436 * leaf_mask: the mask of servers this server may not hub. Multiple
437 * entries are permitted. Useful for forbidding EU -> US -> EU routes.
438 */
439 # leaf_mask = "*.uk";
440
441 /* masking: the servername we pretend to be when we connect */
442 # fakename = "*.arpa";
443
444 /* class: the class this server is in */
445 class = "server";
446
447 /*
448 * autoconnect: controls whether we autoconnect to this server or not,
449 * dependent on class limits. By default, this is disabled.
450 * compressed: controls whether traffic is compressed via ziplinks.
451 * By default, this is disabled
452 * lazylink: controls whether this server is a LazyLink. LazyLink
453 * servers may NOT hub. See doc/LazyLinks.txt
454 *
455 * EFnet Note: With this enabled, you download a connect burst
456 * as it is needed, instead of all at once. This
457 * could allow servers on much smaller lines (T1s)
458 * to link a server. It also could allow a server
459 * on a DoS'ed link to stay connected.
460 * This makes client servers
461 * cheaper to run. EFnet needs more client servers.
462 *
463 * cryptlink: enable full encryption for all data passing between our
464 * server and this link and rsa authentication.
465 * burst_away: This will send the /away string that users have set
466 * on the server burst. Note this can be a lot of data
467 * and slow down your server burst.
468 */
469 # flags = autoconn, lazylink, compressed, cryptlink, burst_away;
470 };
471
472 connect {
473 name = "encrypted.auth.example";
474 host = "some.host.somewhere";
475 port = 6667;
476
477 flags = cryptlink;
478
479 /*
480 * rsa_public_key_file: the path to the public keyfile of the server.
481 * Used instead of passwords.
482 */
483 rsa_public_key_file = "etc/remote.server.keyfile";
484
485 /*
486 * cipher preference: set the preferred cipher for this link
487 *
488 * Available ciphers are:
489 * BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
490 * RC5.12/128 RC5.8/128 3DES/168 DES/56
491 *
492 * NOTE: Some ciphers may not be supported by your OpenSSL.
493 * Check the output from 'configure' for available ciphers.
494 *
495 * NOTE2: To help you decide what cipher to use, tools/encspeed
496 * will show you approximately how fast each cipher is.
497 * However, blowfish is fast and secure, and is probably
498 * a good default for most situations.
499 *
500 * NOTE3: Default if none is set is BF/128
501 *
502 * The cipher *MUST* be the same in both directions. If you
503 * set a cipher preference, your uplink must set the same cipher,
504 * else it will not link.
505 */
506 # cipher_preference = "BF/168";
507 };
508
509 /*
510 * Note: Don't add an extra 'name=' entry if you use
511 * the connect "name"{} feature
512 */
513 connect "ipv6.some.server" {
514 host = "3ffd:dead:beef::1";
515 send_password = "password";
516 accept_password = "password";
517 port = 6666;
518
519 /*
520 * aftype: controls whether the connection uses "ipv4" or "ipv6".
521 * Default is ipv4.
522 */
523 aftype = ipv6;
524 class = "server";
525 };
526
527 /* cluster{}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
528 * automatically (OLD hyb6 SLAVE_SERVERS)
529 */
530 cluster {
531 /* name: the server to share with, this can take wildcards */
532 /* NOTE: only local actions will be clustered, meaning if
533 * the server receives a shared kline/unkline/etc, it
534 * will not be propagated to clustered servers.
535 *
536 * Remote servers are not necessarily required to accept
537 * clustered lines, they need a shared{} for *THIS* server
538 * in order to accept them.
539 */
540 name = "*.arpa";
541
542 /*
543 * type: list of what to share, options are as follows:
544 * kline - share klines
545 * tkline - share temporary klines
546 * unkline - share unklines
547 * xline - share xlines
548 * txline - share temporary xlines
549 * unxline - share unxlines
550 * resv - share resvs
551 * tresv - share temporary resvs
552 * unresv - share unresvs
553 * locops - share locops
554 * all - share all of the above (default)
555 */
556 type = kline, unkline, locops, xline, resv;
557 };
558
559 /* shared {}: users that are allowed to remote kline (OLD U:)
560 *
561 * EFnet Note: This can be effectively used for remote klines.
562 * Please note that there is no password authentication
563 * for users setting remote klines. You must also be
564 * /oper'd in order to issue a remote kline.
565 */
566 shared {
567 /*
568 * name: the server the user must be on to set klines. If this is not
569 * specified, the user will be allowed to kline from all servers.
570 */
571 name = "irc2.some.server";
572
573 /*
574 * user: the user@host mask that is allowed to set klines. If this is
575 * not specified, all users on the server above will be allowed to set
576 * a remote kline.
577 */
578 user = "oper@my.host.is.spoofed";
579
580 /*
581 * type: list of what to share, options are as follows:
582 * kline - allow oper/server to kline
583 * tkline - allow temporary klines
584 * unkline - allow oper/server to unkline
585 * xline - allow oper/server to xline
586 * txline - allow temporary xlines
587 * unxline - allow oper/server to unxline
588 * resv - allow oper/server to resv
589 * tresv - allow temporary resvs
590 * unresv - allow oper/server to unresv
591 * locops - allow oper/server to locops - only used for servers that cluster
592 * all - allow oper/server to do all of the above (default)
593 */
594 type = kline, unkline, resv;
595 };
596
597 /* kill {}: users that are not allowed to connect (OLD K:)
598 * Oper issued klines will be added to the specified kline config
599 */
600 kill {
601 user = "bad@*.hacked.edu";
602 reason = "Obviously hacked account";
603 };
604
605 kill {
606 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.org$";
607 type = regex;
608 };
609
610 /* deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
611 * Oper issued dlines will be added to the specified dline config
612 */
613 deny {
614 ip = "10.0.1.0/24";
615 reason = "Reconnecting vhosted bots";
616 };
617
618 /* exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:)
619 *
620 * EFnet Note: exempt {} blocks are NOT hidden, so do NOT exempt
621 * EFnet server IP's.
622 */
623 exempt {
624 ip = "192.168.0.0/16";
625 };
626
627 /* resv {}: nicks and channels users may not use/join (OLD Q:) */
628 resv {
629 /* reason: the reason for the proceeding resv's */
630 reason = "There are no services on this network";
631
632 /* resv: the nicks and channels users may not join/use */
633 nick = "nickserv";
634 nick = "chanserv";
635 nick = "operserv";
636
637 nick = "JUPES";
638 nick = "JUPE";
639 nick = "CH?NF?X"; # CHANFIX (services.int)
640
641 /* These are totally optional, but may be a good idea */
642 nick = "oper";
643 nick = "ircop";
644 nick = "op";
645 nick = "ident";
646 nick = "pass";
647 channel = "#jupedchan";
648
649 /* resv: wildcard masks are also supported in nicks only */
650 reason = "Clone bots";
651 nick = "clone*";
652 };
653
654 /* gecos {}: The X: replacement, used for banning users based on their
655 * "realname".
656 */
657 gecos {
658 name = "*sex*";
659 reason = "Possible spambot";
660 };
661
662 gecos {
663 name = "sub7server";
664 reason = "Trojan drone";
665 };
666
667 gecos {
668 name = "*http*";
669 reason = "Spambot";
670 };
671
672 gecos {
673 name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
674 type = regex;
675 };
676
677 /*
678 * channel {}
679 *
680 * The channel block contains options pertaining to channels
681 */
682 channel {
683 /* restrict_channels: reverse channel RESVs logic, only reserved
684 * channels are allowed */
685 restrict_channels = no;
686
687 /*
688 * disable_local_channels: prevent users from joining &channels.
689 */
690 disable_local_channels = no;
691
692 /*
693 * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
694 * that can join a +i channel without an invite.
695 */
696 use_invex = yes;
697
698 /*
699 * use_except: Enable/disable channel mode +e, a n!u@h list of masks
700 * that can join a channel through a ban (+b).
701 */
702 use_except = yes;
703
704 /*
705 * use_knock: Allows users to request an invite to a channel that
706 * is locked somehow (+ikl). If the channel is +p or you are banned
707 * the knock will not be sent.
708 *
709 * EFnet Note: This seems to be used mostly by European servers
710 * and not North American ones.
711 * Please feel free to disable this
712 * if you do not want to run channel knock.
713 * channel knock allows an user to "/quote knock #channel"
714 * to ask for an invite. It is typically used in eu-efnet
715 * to ask for an invite to #eu-opers.
716 * An user who is banned will not have their knock
717 * sent to channel. It is paced, so knock will not
718 * cause a flood.
719 */
720 use_knock = yes;
721
722 /*
723 * knock_delay: The amount of time a user must wait between issuing
724 * the knock command.
725 */
726 knock_delay = 1 minutes;
727
728 /*
729 * knock_delay_channel: How often a knock to any specific channel
730 * is permitted, regardless of the user sending the knock.
731 */
732 knock_delay_channel = 1 minute;
733
734 /*
735 * invite_ops_only: Restrict /invite to ops/halfops on channels,
736 * rather than allowing unopped users to invite people to a -i channel.
737 */
738 invite_ops_only = yes;
739
740 /* max chans: The maximum number of channels a user can join/be on. */
741 max_chans_per_user = 25;
742
743 /* quiet_on_ban: stop banned people talking in channels. */
744 quiet_on_ban = yes;
745
746 /* max_bans: maximum number of +b/e/I modes in a channel */
747 max_bans = 100;
748
749 /*
750 * splitcode: The ircd will now check splitmode every few seconds.
751 *
752 * Either split users or split servers can activate splitmode, but
753 * both conditions must be met for the ircd to deactivate splitmode.
754 *
755 * You may force splitmode to be permanent by /quote set splitmode on
756 */
757
758 /*
759 * default_split_user_count: when the usercount is lower than this level,
760 * consider ourselves split. This must be set for automatic splitmode.
761 */
762 default_split_user_count = 40000;
763
764 /*
765 * default_split_server_count: when the servercount is lower than this,
766 * consider ourselves split. This must be set for automatic splitmode.
767 */
768 default_split_server_count = 10;
769
770 /* split no create: disallow users creating channels on split. */
771 no_create_on_split = yes;
772
773 /* split: no join: disallow users joining channels at all on a split */
774 no_join_on_split = no;
775
776 /* burst topicwho: enable sending of who set topic on topicburst */
777 /* default is yes */
778 burst_topicwho = yes;
779
780 /* how many joins in how many seconds constitute a flood, use
781 * 0 to disable. +b opers will be notified (changeable via /set) */
782 join_flood_count = 16;
783 join_flood_time = 8 seconds;
784 };
785
786 /*
787 * serverhide {}
788 *
789 * The serverhide block contains the options regarding serverhiding
790 */
791 serverhide {
792 /*
793 * flatten_links: this option will show all servers in /links appear
794 * that they are linked to this current server
795 *
796 * EFnet Note: While this is not a requirement on EFnet, it
797 * may be a good idea. Except, it's useless
798 * unless the entire net runs it.
799 */
800 flatten_links = yes;
801
802 /*
803 * links_delay: how often to update the links file when it is
804 * flattened.
805 */
806 links_delay = 5 minutes;
807
808 /*
809 * hidden: hide this server from a /links output on servers that
810 * support it. this allows hub servers to be hidden etc.
811 */
812 hidden = no;
813
814 /*
815 * disable_hidden: prevent servers hiding themselves from a
816 * /links output.
817 */
818 disable_hidden = no;
819
820 /*
821 * hide_servers: hide remote servernames everywhere and instead use
822 * hidden_name and network_desc.
823 */
824 hide_servers = no;
825
826 /*
827 * Use this as the servername users see if hide_servers = yes.
828 */
829 hidden_name = "*.hidden.com";
830
831 /*
832 * hide_server_ips: If this is disabled, opers will be unable to see servers
833 * ips and will be shown a masked ip, admins will be shown the real ip.
834 *
835 * If this is enabled, nobody can see a servers ip. *This is a kludge*, it
836 * has the side effect of hiding the ips everywhere, including logfiles.
837 *
838 * We recommend you leave this disabled, and just take care with who you
839 * give admin=yes; to.
840 */
841 hide_server_ips = yes;
842 };
843
844 /*
845 * general {}
846 *
847 * The general block contains many of the options that were once compiled
848 * in options in config.h. The general block is read at start time.
849 */
850 general {
851 /*
852 * gline_min_cidr: the minimum required length of a CIDR bitmask
853 * for IPv4 based glines
854 */
855 gline_min_cidr = 16;
856
857 /*
858 * gline_min_cidr6: the minimum required length of a CIDR bitmask
859 * for IPv6 based glines
860 */
861 gline_min_cidr6 = 48;
862
863 /*
864 * Whether to automatically set mode +i on connecting users.
865 */
866 invisible_on_connect = yes;
867
868 /*
869 * If you don't explicitly specify burst_away in your connect blocks, then
870 * they will default to the burst_away value below.
871 */
872 burst_away = no;
873
874 /*
875 * Show "actually using host <ip>" on /whois when possible.
876 */
877 use_whois_actually = yes;
878
879 /*
880 * Max time from the nickname change that still causes KILL
881 * automatically to switch for the current nick of that user. (seconds)
882 */
883 kill_chase_time_limit = 90;
884
885 /*
886 * If hide_spoof_ips is disabled, opers will be allowed to see the real IP of spoofed
887 * users in /trace etc. If this is defined they will be shown a masked IP.
888 */
889 hide_spoof_ips = yes;
890
891 /*
892 * Ignore bogus timestamps from other servers. Yes, this will desync
893 * the network, but it will allow chanops to resync with a valid non TS 0
894 *
895 * This should be enabled network wide, or not at all.
896 */
897 ignore_bogus_ts = no;
898
899 /*
900 * disable_auth: completely disable ident lookups; if you enable this,
901 * be careful of what you set need_ident to in your auth {} blocks
902 */
903 disable_auth = no;
904
905 /* disable_remote_commands: disable users doing commands on remote servers */
906 disable_remote_commands = no;
907
908 /*
909 * Disable temporary kline/xline expire notices yes/no
910 */
911 tkline_expire_notices = no;
912
913 /*
914 * default_floodcount: the default value of floodcount that is configurable
915 * via /quote set floodcount. This is the amount of lines a user
916 * may send to any other user/channel in one second.
917 */
918 default_floodcount = 10;
919
920 /*
921 * failed_oper_notice: send a notice to all opers on the server when
922 * someone tries to OPER and uses the wrong password, host or ident.
923 */
924 failed_oper_notice = yes;
925
926 /*
927 * dots_in_ident: the amount of '.' characters permitted in an ident
928 * reply before the user is rejected.
929 */
930 dots_in_ident = 0;
931
932 /*
933 * dot_in_ip6_addr: ircd-hybrid-6.0 and earlier will disallow hosts
934 * without a '.' in them. this will add one to the end. only needed
935 * for older servers.
936 */
937 dot_in_ip6_addr = no;
938
939 /*
940 * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
941 * placed via the server. klines hand placed are exempt from limits.
942 * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
943 */
944 min_nonwildcard = 3;
945
946 /*
947 * min_nonwildcard_simple: the minimum non wildcard characters in
948 * gecos bans. wildcard chars: '*' '?' '#'
949 */
950 min_nonwildcard_simple = 3;
951
952 /* max_accept: maximum allowed /accept's for +g usermode */
953 max_accept = 20;
954
955 /* anti_nick_flood: enable the nickflood control code */
956 anti_nick_flood = yes;
957
958 /* nick flood: the nick changes allowed in the specified period */
959 max_nick_time = 20 seconds;
960 max_nick_changes = 5;
961
962 /*
963 * anti_spam_exit_message_time: the minimum time a user must be connected
964 * before custom quit messages are allowed.
965 */
966 anti_spam_exit_message_time = 5 minutes;
967
968 /*
969 * ts delta: the time delta allowed between server clocks before
970 * a warning is given, or before the link is dropped. all servers
971 * should run ntpdate/rdate to keep clocks in sync
972 */
973 ts_warn_delta = 30 seconds;
974 ts_max_delta = 5 minutes;
975
976 /*
977 * kline_with_reason: show the user the reason why they are k/d/glined
978 * on exit. May give away who set k/dline when set via tcm.
979 */
980 kline_with_reason = yes;
981
982 /*
983 * kline_reason: show this message to users on channel
984 * instead of the oper reason.
985 */
986 kline_reason = "Connection closed";
987
988 /*
989 * reject_hold_time: wait this amount of time before disconnecting
990 * a rejected client. Use 0 to disable.
991 */
992 reject_hold_time = 30 seconds;
993
994 /*
995 * warn_no_nline: warn opers about servers that try to connect but
996 * we don't have a connect {} block for. Twits with misconfigured
997 * servers can get really annoying with this enabled.
998 */
999 warn_no_nline = yes;
1000
1001 /* stats_o_oper only: make stats o (opers) oper only */
1002 stats_o_oper_only = yes;
1003
1004 /* stats_P_oper_only: make stats P (ports) oper only */
1005 stats_P_oper_only = yes;
1006
1007 /*
1008 * stats i oper only: make stats i (auth {}) oper only. set to:
1009 * yes: show users no auth blocks, made oper only.
1010 * masked: show users first matching auth block
1011 * no: show users all auth blocks.
1012 */
1013 stats_i_oper_only = yes;
1014
1015 /*
1016 * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1017 * yes: show users no auth blocks, made oper only
1018 * masked: show users first matching auth block
1019 * no: show users all auth blocks.
1020 */
1021 stats_k_oper_only = yes;
1022
1023 /*
1024 * caller_id_wait: time between notifying a +g user that somebody
1025 * is messaging them.
1026 */
1027 caller_id_wait = 1 minute;
1028
1029 /*
1030 * pace_wait_simple: time between use of less intensive commands
1031 * (HELP, remote WHOIS, WHOWAS)
1032 */
1033 pace_wait_simple = 1 second;
1034
1035 /*
1036 * pace_wait: time between more intensive commands
1037 * (ADMIN, INFO, LIST, LUSERS, MOTD, STATS, VERSION)
1038 */
1039 pace_wait = 10 seconds;
1040
1041 /*
1042 * short_motd: send clients a notice telling them to read the motd
1043 * instead of forcing a motd to clients who may simply ignore it.
1044 */
1045 short_motd = no;
1046
1047 /*
1048 * ping_cookie: require clients to respond exactly to a ping command,
1049 * can help block certain types of drones and FTP PASV mode spoofing.
1050 */
1051 ping_cookie = no;
1052
1053 /* no_oper_flood: increase flood limits for opers. */
1054 no_oper_flood = yes;
1055
1056 /*
1057 * true_no_oper_flood: completely eliminate flood limits for opers
1058 * and for clients with can_flood = yes in their auth {} blocks
1059 */
1060 true_no_oper_flood = yes;
1061
1062 /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1063 oper_pass_resv = yes;
1064
1065 /*
1066 * idletime: the maximum amount of time a user may idle before
1067 * they are disconnected
1068 */
1069 idletime = 0;
1070
1071 /* REMOVE ME. The following line checks you've been reading. */
1072 havent_read_conf = 1;
1073
1074 /*
1075 * max_targets: the maximum amount of targets in a single
1076 * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1077 */
1078 max_targets = 4;
1079
1080 /*
1081 * client_flood: maximum amount of data in a clients queue before
1082 * they are dropped for flooding.
1083 */
1084 client_flood = 2560 bytes;
1085
1086 /*
1087 * message_locale: the default message locale
1088 * Use "standard" for the compiled in defaults.
1089 * To install the translated messages, go into messages/ in the
1090 * source directory and run `make install'.
1091 */
1092 message_locale = "standard";
1093
1094 /*
1095 * usermodes configurable: a list of usermodes for the options below
1096 *
1097 * +b - bots - See bot and drone flooding notices
1098 * +c - cconn - Client connection/quit notices
1099 * +D - deaf - Don't receive channel messages
1100 * +d - debug - See debugging notices
1101 * +f - full - See I: line full notices
1102 * +G - softcallerid - Server Side Ignore for users not on your channels
1103 * +g - callerid - Server Side Ignore (for privmsgs etc)
1104 * +i - invisible - Not shown in NAMES or WHO unless you share a
1105 * a channel
1106 * +k - skill - See server generated KILL messages
1107 * +l - locops - See LOCOPS messages
1108 * +n - nchange - See client nick changes
1109 * +r - rej - See rejected client notices
1110 * +s - servnotice - See general server notices
1111 * +u - unauth - See unauthorized client notices
1112 * +w - wallop - See server generated WALLOPS
1113 * +x - external - See remote server connection and split notices
1114 * +y - spy - See LINKS, STATS, TRACE notices etc.
1115 * +z - operwall - See oper generated WALLOPS
1116 */
1117
1118 /* oper_only_umodes: usermodes only opers may set */
1119 oper_only_umodes = bots, cconn, debug, full, skill, nchange,
1120 rej, spy, external, operwall, locops, unauth;
1121
1122 /* oper_umodes: default usermodes opers get when they /oper */
1123 oper_umodes = locops, servnotice, operwall, wallop;
1124
1125 /*
1126 * servlink_path: path to 'servlink' program used by ircd to handle
1127 * encrypted/compressed server <-> server links.
1128 *
1129 * only define if servlink is not in same directory as ircd itself.
1130 */
1131 #servlink_path = "/usr/local/ircd/bin/servlink";
1132
1133 /*
1134 * default_cipher_preference: default cipher to use for cryptlink when none is
1135 * specified in connect block.
1136 */
1137 #default_cipher_preference = "BF/168";
1138
1139 /*
1140 * use_egd: if your system does not have *random devices yet you
1141 * want to use OpenSSL and encrypted links, enable this. Beware -
1142 * EGD is *very* CPU intensive when gathering data for its pool
1143 */
1144 # use_egd = yes;
1145
1146 /*
1147 * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1148 * which automatically finds the path.
1149 */
1150 # egdpool_path = "/var/run/egd-pool";
1151
1152
1153 /*
1154 * compression_level: level of compression for compressed links between
1155 * servers.
1156 *
1157 * values are between: 1 (least compression, fastest)
1158 * and: 9 (most compression, slowest).
1159 */
1160 # compression_level = 6;
1161
1162 /*
1163 * throttle_time: the minimum amount of time between connections from
1164 * the same ip. exempt {} blocks are excluded from this throttling.
1165 * Offers protection against flooders who reconnect quickly.
1166 * Set to 0 to disable.
1167 *
1168 * EFnet Note: exempt {} blocks are NOT hidden, so do NOT exempt
1169 * EFnet server IP's.
1170 */
1171 throttle_time = 0;
1172 };
1173
1174 glines {
1175 /*
1176 * EFnet Note: This feature is required for European EFnet servers
1177 * and is used by several North American servers. As
1178 * such, it has been left on by default. If you
1179 * do not want your server to participate in G:Lines
1180 * you should disable this.
1181 */
1182
1183 /* enable: enable glines, network wide temp klines */
1184 enable = yes;
1185
1186 /* duration: the amount of time a gline will remain on your server before expiring */
1187 duration = 1 day;
1188
1189 /* logging: which types of rules you want to log when triggered (choose reject or block) */
1190 logging = reject, block;
1191
1192 /*
1193 * NOTE: gline ACLs can cause a desync of glines throughout the network, meaning some servers
1194 * may have a gline triggered, and others may not. Also, you only need insert rules for glines
1195 * that you want to block and/or reject. If you want to accept and propagate the gline, do NOT
1196 * put a rule for it.
1197 */
1198
1199 /* user@host for rule to apply to */
1200 user = "god@I.still.hate.packets";
1201 /* server for rule to apply to */
1202 name = "hades.arpa";
1203
1204 /*
1205 * action: action to take when a matching gline is found. options are:
1206 * reject - do not apply the gline locally
1207 * block - do not propagate the gline
1208 */
1209 action = reject, block;
1210
1211 user = "god@*";
1212 name = "*";
1213 action = block;
1214 };
1215
1216 modules {
1217 /*
1218 * module path: other paths to search for modules specified below
1219 * and in /modload.
1220 */
1221 path = "/usr/local/ircd/modules";
1222 path = "/usr/local/ircd/modules/autoload";
1223
1224 /* module: the name of a module to load on startup/rehash */
1225 #module = "some_module.so";
1226 };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28