/[svn]/ircd-hybrid-7.2/etc/example.efnet.conf.in
ViewVC logotype

Annotation of /ircd-hybrid-7.2/etc/example.efnet.conf.in

Parent Directory Parent Directory | Revision Log Revision Log


Revision 951 - (hide annotations)
Wed Jul 22 10:47:24 2009 UTC (10 years, 11 months ago) by michael
File size: 38961 byte(s)
- update example configuration files

1 michael 584 /* doc/example.efnet.conf - ircd-hybrid-7 EFnet Example configuration file
2 michael 583 * Copyright (C) 2000-2006 Hybrid Development Team
3 adx 30 *
4     * Written by ejb, wcampbel, db, leeh and others
5     * Other example configurations can be found in the source dir under
6     * etc/.
7     *
8 knight 31 * $Id$
9 adx 30 */
10    
11     /* IMPORTANT NOTES:
12     *
13     * auth {} blocks MUST be specified in order of precedence. The first one
14     * that matches a user will be used. So place spoofs first, then specials,
15     * then general access.
16     *
17     * Shell style (#), C++ style (//) and C style comments are supported.
18     *
19     * Files may be included by either:
20     * .include "filename"
21     * .include <filename>
22     *
23     * Times/durations are written as:
24     * 12 hours 30 minutes 1 second
25     *
26     * Valid units of time:
27     * month, week, day, hour, minute, second
28     *
29     * Valid units of size:
30     * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31     *
32     * Sizes and times may be singular or plural.
33     */
34    
35     /* EFNET NOTE:
36 michael 583 *
37 adx 30 * This configuration file is a BASIC configuration file for use
38     * on EFnet. You MUST still take the time to set this file up
39     * properly.
40     *
41     * DISCLAIMER: This file was submitted by Disciple@EFnet and has
42     * since been modified by the Hybrid team.
43     */
44    
45 michael 583 /*
46     * serverinfo {}: contains information about the server. (OLD M:)
47     */
48 adx 30 serverinfo {
49 michael 583 /*
50     * name: the name of our server. This cannot be changed at runtime.
51     */
52 adx 30 name = "efnet.irc";
53    
54     /*
55 michael 583 * sid: a server's unique ID. This is three characters long and must
56     * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
57     * a digit, followed by 2 alpha-numerical letters.
58     * NOTE: The letters must be capitalized. This cannot be changed at runtime.
59 adx 30 */
60     sid = "_CHANGE_ME_";
61    
62     /*
63     * description: the description of the server. '[' and ']' may not
64     * be used here for compatibility with older servers.
65     */
66     description = "hybrid-7 test server";
67    
68     /*
69     * network info: the name and description of the network this server
70     * is on. Shown in the 005 reply and used with serverhiding.
71     */
72     network_name = "EFnet";
73     network_desc = "Eris Free Network";
74    
75     /*
76     * hub: allow this server to act as a hub and have multiple servers
77 michael 885 * connected to it.
78 adx 30 */
79     hub = no;
80    
81     /*
82     * vhost: the IP to bind to when we connect outward to ipv4 servers.
83     * This should be an ipv4 IP only, or "* for INADDR_ANY.
84     */
85     #vhost = "192.169.0.1";
86    
87     /*
88     * vhost6: the IP to bind to when we connect outward to ipv6 servers.
89     * This should be an ipv6 IP only, or "* for INADDR_ANY.
90     */
91     #vhost6 = "3ffe:80e8:546::2";
92    
93     /* max_clients: the maximum number of clients allowed to connect */
94     max_clients = 512;
95    
96     /*
97 michael 951 * rsa_private_key_file: the path to the file containing our
98     * rsa key for cryptlink.
99 adx 30 *
100     * Example command to store a 2048 bit RSA keypair in
101     * rsa.key, and the public key in rsa.pub:
102     *
103     * openssl genrsa -out rsa.key 2048
104     * openssl rsa -in rsa.key -pubout -out rsa.pub
105     * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
106     * chmod 0600 rsa.key
107     * chmod 0644 rsa.pub
108     */
109     #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
110 michael 951
111     /*
112     * ssl_certificate_file: the path to the file containing our
113     * ssl certificate for encrypted client connection.
114     *
115     * This assumes your private RSA key is stored in rsa.key. You
116     * MUST have an RSA key in order to generate the certificate
117     *
118     * openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
119     *
120     * See http://www.openssl.org/docs/HOWTO/certificates.txt
121     *
122     * Please use the following values when generating the cert
123     *
124     * Organization Name: Network Name
125     * Organization Unit Name: changme.someirc.net
126     * Common Name: irc.someirc.net
127     * E-mail: you@domain.com
128     */
129     #ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
130 adx 30 };
131    
132 michael 583 /*
133     * admin {}: contains admin information about the server. (OLD A:)
134     */
135 adx 30 admin {
136     name = "EFnet Admin";
137     description = "Main Server Administrator";
138     email = "<irc-admin@efnet.irc>";
139     };
140    
141 michael 583 /*
142     * log {}: contains information about logfiles.
143     */
144     log {
145 adx 30 /* Do you want to enable logging to ircd.log? */
146     use_logging = yes;
147    
148     /*
149     * logfiles: the logfiles to use for user connects, /oper uses,
150     * and failed /oper. These files must exist for logging to be used.
151     */
152 michael 583 fname_userlog = "logs/userlog";
153     fname_operlog = "logs/operlog";
154     fname_killlog = "logs/kill";
155     fname_klinelog = "logs/kline";
156     fname_glinelog = "logs/gline";
157 adx 30
158     /*
159 michael 583 * log_level: the amount of detail to log in ircd.log. The
160 adx 30 * higher, the more information is logged. May be changed
161     * once the server is running via /quote SET LOG. Either:
162     * L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
163     */
164     log_level = L_INFO;
165     };
166    
167 michael 583 /*
168     * class {}: contains information about classes for users (OLD Y:)
169     */
170 adx 30 class {
171     /* name: the name of the class. classes are text now */
172     name = "users";
173    
174     /*
175     * ping_time: how often a client must reply to a PING from the
176     * server before they are dropped.
177     */
178     ping_time = 90 seconds;
179    
180 michael 583 /*
181     * number_per_ip: how many local users are allowed to connect
182     * from one IP (optional)
183     */
184 adx 30 number_per_ip = 2;
185    
186 michael 583 /*
187     * max_local: how many local users are allowed to connect
188     * from one ident@host (optional)
189     */
190 adx 30 max_local = 2;
191    
192 michael 583 /*
193     * max_global: network-wide limit of users per ident@host (optional)
194     */
195 adx 30 max_global = 10;
196    
197 michael 583 /*
198     * max_number: the maximum number of users allowed in this class (optional)
199     */
200 adx 30 max_number = 100;
201    
202 michael 583 /*
203     * the following lines are optional and allow you to define
204     * how many users can connect from one /NN subnet
205     */
206     cidr_bitlen_ipv4 = 24;
207     cidr_bitlen_ipv6 = 120;
208     number_per_cidr = 16;
209 adx 40
210 adx 30 /*
211     * sendq: the amount of data allowed in a clients queue before
212     * they are dropped.
213     */
214     sendq = 100 kbytes;
215     };
216    
217     class {
218     name = "opers";
219    
220     /*
221     * contrary to seeming popular belief, setting ping time
222     * higher for an oper is NOT doing them a favor.
223     * Since if a link is dead its dead and it means
224     * you have to use another nick long enough to kill the old one :-)
225     * Its much better to use a fairly standard 90 second ping time
226     */
227     ping_time = 90 seconds;
228     number_per_ip = 10;
229     max_number = 100;
230     sendq = 1 mbyte;
231     };
232    
233     class {
234     name = "server";
235    
236     /*
237 michael 583 * Same thing here. It's a fallacy to think increasing
238 adx 30 * ping time for servers is a "good idea." All it leads to
239     * is "ghosting" on one end. Not a good idea.
240     */
241     ping_time = 90 seconds;
242    
243 michael 583 /*
244     * ping_warning: how fast a server must reply to a PING before
245     * a warning to opers is generated.
246     */
247     ping_warning = 15 seconds;
248 adx 30
249     /*
250     * connectfreq: only used in server classes. Specifies the delay
251     * between autoconnecting to servers.
252     *
253     * Both comstud and I recommend 10 minutes a few years ago.
254     * 15 minutes might be right now. The reason you don't want it too
255     * low is, you make the servers reconnect too quickly with
256     * a large sendq, and they _will_ nick collide. badly. 5 minutes
257     * IS way too short.
258     */
259     connectfreq = 15 minutes;
260    
261     /* max number: the amount of servers to autoconnect to */
262     max_number = 1;
263    
264 michael 583 /* sendq: servers need a higher sendq as they send more data */
265 adx 30 sendq = 15 megabytes;
266     };
267    
268 michael 583 /*
269     * listen {}: contains information about the ports ircd listens on (OLD P:)
270     */
271 adx 30 listen {
272     /*
273     * port: the specific port to listen on. If no host is specified
274     * before, it will listen on all available IPs.
275     *
276     * Ports are separated via a comma, a range may be specified using ".."
277     */
278    
279     /* port: listen on all available IPs, ports 6665 to 6669 */
280     port = 6665 .. 6669;
281    
282     /*
283 michael 951 * Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
284 adx 30 * unless you are an administrator.
285     *
286     * NOTE: The "flags" directive has to come before "port". Always!
287 michael 900 *
288     * Currently available flags are:
289     *
290     * ssl - Port is for SSL client connections only
291     * server - Only server connections are permitted
292     * hidden - Port is hidden from /stats P
293 adx 30 */
294 michael 951 flags = hidden, ssl;
295 adx 30 host = "192.168.0.1";
296 michael 951 port = 6697;
297 adx 30
298     /*
299     * host: set a specific IP/host the ports after the line will listen
300     * on. This may be ipv4 or ipv6.
301     */
302     host = "1.2.3.4";
303     port = 7000, 7001;
304    
305     host = "3ffe:1234:a:b:c::d";
306     port = 7002;
307     };
308    
309 michael 583 /*
310     * auth {}: allow users to connect to the ircd (OLD I:)
311     */
312 adx 30 auth {
313     /*
314     * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
315     * lines are permitted per auth block.
316     */
317     user = "*@172.16.0.0/12";
318     user = "*test@123D:B567:*";
319    
320     /* password: an optional password that is required to use this block */
321     password = "letmein";
322    
323     /*
324     * encrypted: controls whether the auth password above has been
325     * encrypted.
326     */
327     encrypted = yes;
328    
329     /*
330     * spoof: fake the users host to this. This is free-form,
331     * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
332     */
333     spoof = "I.still.hate.packets";
334    
335     /* class: the class the user is placed in */
336     class = "opers";
337    
338     /*
339     * need_password: don't allow users who haven't supplied the correct
340     * password to connect using another auth{} block
341     * ('&' prefix on /stats I if disabled)
342     * need_ident: require the user to have identd to connect ('+' prefix on /stats I)
343     * spoof_notice: enable spoofing notification to admins
344     * exceed_limit: allow a user to exceed class limits ('>' prefix on /stats I)
345     * kline_exempt: exempt this user from k/glines ('^' prefix on /stats I)
346     * gline_exempt: exempt this user from glines ('_' prefix on /stats I)
347     * resv_exempt: exempt this user from resvs ('$' prefix on /stats I)
348     * no_tilde: remove ~ from a user with no ident ('-' prefix on /stats I)
349     * can_flood: allow this user to exceed flood limits ('|' prefix on /stats I)
350 michael 390 * can_idle: exempt this user from idle restrictions ('<' prefix on /stats I)
351 adx 30 */
352     flags = need_password, spoof_notice, exceed_limit, kline_exempt,
353     gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
354     };
355    
356     auth {
357     /*
358     * redirect: the server and port to redirect a user to. A user does
359     * not have to obey the redirection, the ircd just suggests an alternative
360     * server for them.
361     */
362 db 806 redirserv = "this.is.not.a.real.server";
363 adx 30 redirport = 6667;
364    
365 db 806 user = "*.server";
366 adx 30
367     /* class: a class is required even though it is not used */
368     class = "users";
369     };
370    
371     auth {
372     user = "*@*";
373     class = "users";
374     flags = need_ident;
375     };
376    
377 michael 583 /*
378     * operator {}: defines ircd operators. (OLD O:)
379     *
380 adx 30 * ircd-hybrid no longer supports local operators, privileges are
381     * controlled via flags.
382     */
383     operator {
384     /* name: the name of the oper */
385 michael 583 /* NOTE: operator "opername"{} is also supported */
386 adx 30 name = "god";
387    
388     /*
389     * user: the user@host required for this operator. CIDR is not
390     * supported. Multiple user="" lines are supported.
391     */
392     user = "*god@*";
393     user = "*@127.0.0.1";
394    
395     /*
396     * password: the password required to oper. By default this will
397     * need to be encrypted using 'mkpasswd'. MD5 is supported.
398     */
399     password = "etcnjl8juSU1E";
400    
401     /*
402     * encrypted: controls whether the oper password above has been
403     * encrypted. (OLD CRYPT_OPER_PASSWORD now optional per operator)
404     */
405     encrypted = yes;
406    
407     /*
408     * rsa_public_key_file: the public key for this oper when using Challenge.
409     * A password should not be defined when this is used, see
410     * doc/challenge.txt for more information.
411     */
412     # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
413    
414     /* class: the class the oper joins when they successfully /oper */
415     class = "opers";
416    
417     /*
418 michael 56 * umodes: default usermodes opers get when they /oper. If defined,
419     * it will override oper_umodes settings in general {}.
420     * Available usermodes:
421     *
422     * +b - bots - See bot and drone flooding notices
423     * +c - cconn - Client connection/quit notices
424 db 853 * +C - cconn_full - Client connection/quit notices full
425 michael 56 * +D - deaf - Don't receive channel messages
426     * +d - debug - See debugging notices
427     * +f - full - See I: line full notices
428     * +G - softcallerid - Server Side Ignore for users not on your channels
429     * +g - callerid - Server Side Ignore (for privmsgs etc)
430     * +i - invisible - Not shown in NAMES or WHO unless you share a
431     * a channel
432     * +k - skill - See server generated KILL messages
433     * +l - locops - See LOCOPS messages
434     * +n - nchange - See client nick changes
435     * +r - rej - See rejected client notices
436     * +s - servnotice - See general server notices
437     * +u - unauth - See unauthorized client notices
438     * +w - wallop - See server generated WALLOPS
439     * +x - external - See remote server connection and split notices
440     * +y - spy - See LINKS, STATS, TRACE notices etc.
441     * +z - operwall - See oper generated WALLOPS
442     */
443     # umodes = locops, servnotice, operwall, wallop;
444    
445     /*
446 adx 30 * privileges: controls the activities and commands an oper is
447     * allowed to do on the server. All options default to no.
448     * Available options:
449     *
450     * global_kill: allows remote users to be /KILL'd (OLD 'O' flag)
451     * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
452     * remoteban: allows remote KLINE/UNKLINE
453     * kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
454     * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
455     * gline: allows GLINE (OLD 'G' flag)
456 michael 951 * xline: allows XLINE (OLD 'X' flag)
457 adx 30 * operwall: allows OPERWALL
458     * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
459     * via usermode +n
460     * rehash: allows oper to REHASH config (OLD 'H' flag)
461     * die: allows DIE and RESTART (OLD 'D' flag)
462     * admin: gives admin privileges. admins
463     * may (un)load modules and see the
464     * real IPs of servers.
465     * hidden_admin: same as 'admin', but noone can recognize you as
466 michael 583 * being an admin
467 adx 30 * hidden_oper: not shown in /stats p (except for other operators)
468     */
469     /* You can either use
470     * die = yes;
471     * rehash = yes;
472     *
473     * or in a flags statement i.e.
474     * flags = die, rehash;
475     *
476     * You can also negate a flag with ~ i.e.
477     * flags = ~remote;
478     *
479     */
480     flags = global_kill, remote, kline, unkline, xline,
481     die, rehash, nick_changes, admin, operwall;
482     };
483    
484 michael 583 /*
485     * connect {}: controls servers we connect to (OLD C:, N:, H:, L:)
486     */
487 adx 30 connect {
488     /* name: the name of the server */
489     name = "irc.uplink.com";
490    
491     /*
492     * host: the host or IP to connect to. If a hostname is used it
493     * must match the reverse dns of the server.
494     */
495     host = "192.168.0.1";
496    
497 michael 583 /*
498     * vhost: the IP to bind to when we connect outward to servers.
499     * serverinfo::vhost and serverinfo::vhost6 will be overridden
500     * by this directive.
501     */
502     vhost = "192.168.0.2";
503 michael 548
504 adx 30 /*
505     * passwords: the passwords we send (OLD C:) and accept (OLD N:).
506     * The remote server will have these passwords reversed.
507     */
508     send_password = "password";
509     accept_password = "anotherpassword";
510    
511     /*
512     * encrypted: controls whether the accept_password above has been
513     * encrypted. (OLD CRYPT_LINK_PASSWORD now optional per connect)
514     */
515     encrypted = no;
516    
517     /* port: the port to connect to this server on */
518     port = 6666;
519    
520     /*
521 michael 583 * hub_mask: the mask of servers that this server may hub. Multiple
522 adx 30 * entries are permitted
523     */
524     hub_mask = "*";
525    
526     /*
527     * leaf_mask: the mask of servers this server may not hub. Multiple
528     * entries are permitted. Useful for forbidding EU -> US -> EU routes.
529     */
530     # leaf_mask = "*.uk";
531    
532 michael 583 /* fakename: the servername we pretend to be when we connect */
533 adx 30 # fakename = "*.arpa";
534    
535     /* class: the class this server is in */
536     class = "server";
537    
538     /*
539 michael 124 * autoconn: controls whether we autoconnect to this server or not,
540 michael 583 * dependent on class limits. By default, this is disabled.
541 adx 30 * compressed: controls whether traffic is compressed via ziplinks.
542     * By default, this is disabled
543     * cryptlink: enable full encryption for all data passing between our
544     * server and this link and rsa authentication.
545     * burst_away: This will send the /away string that users have set
546 michael 583 * on the server burst. Note this can be a lot of data
547 adx 30 * and slow down your server burst.
548 michael 330 * topicburst: Send topics to this server during channel burst. Works
549     * only if the server we are connecting to is capable
550     * of TBURST/TB.
551 adx 30 */
552 michael 885 # flags = autoconn, compressed, cryptlink, burst_away, topicburst;
553 adx 30 };
554    
555     connect {
556     name = "encrypted.auth.example";
557     host = "some.host.somewhere";
558     port = 6667;
559    
560     flags = cryptlink;
561    
562     /*
563     * rsa_public_key_file: the path to the public keyfile of the server.
564     * Used instead of passwords.
565     */
566     rsa_public_key_file = "etc/remote.server.keyfile";
567    
568     /*
569     * cipher preference: set the preferred cipher for this link
570     *
571     * Available ciphers are:
572     * BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
573     * RC5.12/128 RC5.8/128 3DES/168 DES/56
574     *
575     * NOTE: Some ciphers may not be supported by your OpenSSL.
576     * Check the output from 'configure' for available ciphers.
577     *
578     * NOTE2: To help you decide what cipher to use, tools/encspeed
579     * will show you approximately how fast each cipher is.
580     * However, blowfish is fast and secure, and is probably
581     * a good default for most situations.
582     *
583     * NOTE3: Default if none is set is BF/128
584     *
585     * The cipher *MUST* be the same in both directions. If you
586     * set a cipher preference, your uplink must set the same cipher,
587     * else it will not link.
588     */
589     # cipher_preference = "BF/168";
590     };
591    
592     /*
593 michael 583 * NOTE: Don't add an extra 'name=' entry if you use
594 adx 30 * the connect "name"{} feature
595     */
596     connect "ipv6.some.server" {
597     host = "3ffd:dead:beef::1";
598     send_password = "password";
599     accept_password = "password";
600     port = 6666;
601    
602     /*
603     * aftype: controls whether the connection uses "ipv4" or "ipv6".
604     * Default is ipv4.
605     */
606     aftype = ipv6;
607     class = "server";
608     };
609    
610 michael 583 /*
611     * cluster {}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
612 adx 30 * automatically (OLD hyb6 SLAVE_SERVERS)
613     */
614     cluster {
615 michael 583 /*
616     * name: the server to share with, this can take wildcards
617     *
618     * NOTE: only local actions will be clustered, meaning if
619 adx 30 * the server receives a shared kline/unkline/etc, it
620     * will not be propagated to clustered servers.
621     *
622     * Remote servers are not necessarily required to accept
623     * clustered lines, they need a shared{} for *THIS* server
624     * in order to accept them.
625     */
626     name = "*.arpa";
627    
628     /*
629     * type: list of what to share, options are as follows:
630     * kline - share klines
631     * tkline - share temporary klines
632     * unkline - share unklines
633     * xline - share xlines
634     * txline - share temporary xlines
635     * unxline - share unxlines
636     * resv - share resvs
637     * tresv - share temporary resvs
638     * unresv - share unresvs
639     * locops - share locops
640     * all - share all of the above (default)
641     */
642     type = kline, unkline, locops, xline, resv;
643     };
644    
645 michael 583 /*
646     * shared {}: users that are allowed to remote kline (OLD U:)
647 adx 30 *
648 michael 583 * NOTE: This can be effectively used for remote klines.
649     * Please note that there is no password authentication
650     * for users setting remote klines. You must also be
651     * /oper'd in order to issue a remote kline.
652 adx 30 */
653     shared {
654     /*
655     * name: the server the user must be on to set klines. If this is not
656     * specified, the user will be allowed to kline from all servers.
657     */
658     name = "irc2.some.server";
659    
660     /*
661     * user: the user@host mask that is allowed to set klines. If this is
662     * not specified, all users on the server above will be allowed to set
663     * a remote kline.
664     */
665     user = "oper@my.host.is.spoofed";
666    
667     /*
668     * type: list of what to share, options are as follows:
669     * kline - allow oper/server to kline
670     * tkline - allow temporary klines
671     * unkline - allow oper/server to unkline
672     * xline - allow oper/server to xline
673     * txline - allow temporary xlines
674     * unxline - allow oper/server to unxline
675     * resv - allow oper/server to resv
676     * tresv - allow temporary resvs
677     * unresv - allow oper/server to unresv
678     * locops - allow oper/server to locops - only used for servers that cluster
679     * all - allow oper/server to do all of the above (default)
680     */
681     type = kline, unkline, resv;
682     };
683    
684 michael 583 /*
685     * kill {}: users that are not allowed to connect (OLD K:)
686 adx 30 * Oper issued klines will be added to the specified kline config
687     */
688     kill {
689     user = "bad@*.hacked.edu";
690     reason = "Obviously hacked account";
691     };
692    
693     kill {
694 michael 951 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
695    
696     /*
697     * NOTE: You have to set type=regex; when using a regular expression
698     * based user entry
699     */
700 adx 30 type = regex;
701     };
702    
703 michael 583 /*
704     * deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
705 adx 30 * Oper issued dlines will be added to the specified dline config
706     */
707     deny {
708     ip = "10.0.1.0/24";
709     reason = "Reconnecting vhosted bots";
710     };
711    
712 michael 583 /*
713     * exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:)
714 adx 30 *
715 michael 584 * EFnet Note: We really suggest to enable general::stats_e_disabled
716     * if you plan to exempt EFnet server IPs you don't want to show to
717     * other operators and/or administrators through "STATS e".
718 adx 30 */
719     exempt {
720     ip = "192.168.0.0/16";
721     };
722    
723 michael 583 /*
724     * resv {}: nicks and channels users may not use/join (OLD Q:)
725     */
726 adx 30 resv {
727     /* reason: the reason for the proceeding resv's */
728     reason = "There are no services on this network";
729    
730     /* resv: the nicks and channels users may not join/use */
731     nick = "nickserv";
732     nick = "chanserv";
733     nick = "operserv";
734     nick = "JUPES";
735     nick = "JUPE";
736     nick = "CH?NF?X"; # CHANFIX (services.int)
737    
738     /* These are totally optional, but may be a good idea */
739     nick = "oper";
740     nick = "ircop";
741     nick = "op";
742     nick = "ident";
743     nick = "pass";
744     channel = "#jupedchan";
745    
746     /* resv: wildcard masks are also supported in nicks only */
747     reason = "Clone bots";
748     nick = "clone*";
749     };
750    
751 michael 583 /*
752     * gecos {}: The X: replacement, used for banning users based on
753     * their "realname".
754 adx 30 */
755     gecos {
756     name = "*sex*";
757     reason = "Possible spambot";
758     };
759    
760     gecos {
761     name = "sub7server";
762     reason = "Trojan drone";
763     };
764    
765     gecos {
766     name = "*http*";
767     reason = "Spambot";
768     };
769    
770     gecos {
771     name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
772 michael 951
773     /*
774     * NOTE: You have to set type=regex; when using a regular expression
775     * based name entry
776     */
777 adx 30 type = regex;
778     };
779    
780     /*
781 michael 583 * channel {}: The channel block contains options pertaining to channels
782 adx 30 */
783     channel {
784 michael 56 /*
785 michael 632 * disable_fake_channels: this option, if set to 'yes', will
786     * disallow clients to create or join channels that have one
787     * of the following ASCII characters in their name:
788     *
789     * 2 | bold
790     * 3 | mirc color
791 michael 639 * 15 | plain text
792 michael 632 * 22 | reverse
793     * 31 | underline
794     * 160 | non-breaking space
795     */
796     disable_fake_channels = yes;
797    
798     /*
799 michael 56 * restrict_channels: reverse channel RESVs logic, only reserved
800     * channels are allowed
801     */
802     restrict_channels = no;
803 adx 30
804     /*
805     * disable_local_channels: prevent users from joining &channels.
806     */
807     disable_local_channels = no;
808    
809     /*
810     * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
811     * that can join a +i channel without an invite.
812     */
813     use_invex = yes;
814    
815     /*
816     * use_except: Enable/disable channel mode +e, a n!u@h list of masks
817     * that can join a channel through a ban (+b).
818     */
819     use_except = yes;
820    
821     /*
822     * use_knock: Allows users to request an invite to a channel that
823     * is locked somehow (+ikl). If the channel is +p or you are banned
824     * the knock will not be sent.
825     *
826     * EFnet Note: This seems to be used mostly by European servers
827     * and not North American ones.
828 michael 583 * Please feel free to disable this if you do not
829     * want to run channel knock.
830 adx 30 * channel knock allows an user to "/quote knock #channel"
831 michael 583 * to ask for an invite. It is typically used in eu-efnet
832 adx 30 * to ask for an invite to #eu-opers.
833 adx 201 * A user who is banned will not have their knock
834 michael 583 * sent to channel. It is paced, so knock will not
835 adx 30 * cause a flood.
836     */
837     use_knock = yes;
838    
839     /*
840     * knock_delay: The amount of time a user must wait between issuing
841     * the knock command.
842     */
843 michael 951 knock_delay = 5 minutes;
844 adx 30
845     /*
846     * knock_delay_channel: How often a knock to any specific channel
847     * is permitted, regardless of the user sending the knock.
848     */
849     knock_delay_channel = 1 minute;
850    
851 michael 583 /*
852     * burst_topicwho: enable sending of who set topic on topicburst
853     * default is yes
854     */
855 adx 201 burst_topicwho = yes;
856 adx 30
857 michael 583 /*
858     * max_chans_per_user: The maximum number of channels a user can
859     * join/be on.
860     */
861 adx 30 max_chans_per_user = 25;
862    
863     /* quiet_on_ban: stop banned people talking in channels. */
864     quiet_on_ban = yes;
865    
866     /* max_bans: maximum number of +b/e/I modes in a channel */
867     max_bans = 100;
868    
869     /*
870 adx 201 * how many joins in how many seconds constitute a flood, use 0 to
871     * disable. +b opers will be notified (changeable via /set)
872     */
873     join_flood_count = 16;
874     join_flood_time = 8 seconds;
875    
876     /*
877 adx 30 * splitcode: The ircd will now check splitmode every few seconds.
878     *
879     * Either split users or split servers can activate splitmode, but
880     * both conditions must be met for the ircd to deactivate splitmode.
881     *
882     * You may force splitmode to be permanent by /quote set splitmode on
883     */
884    
885     /*
886     * default_split_user_count: when the usercount is lower than this level,
887     * consider ourselves split. This must be set for automatic splitmode.
888     */
889     default_split_user_count = 40000;
890    
891     /*
892     * default_split_server_count: when the servercount is lower than this,
893     * consider ourselves split. This must be set for automatic splitmode.
894     */
895     default_split_server_count = 10;
896    
897     /* split no create: disallow users creating channels on split. */
898     no_create_on_split = yes;
899    
900     /* split: no join: disallow users joining channels at all on a split */
901     no_join_on_split = no;
902     };
903    
904     /*
905 michael 583 * serverhide {}: The serverhide block contains the options regarding
906     * serverhiding
907 adx 30 */
908     serverhide {
909     /*
910     * flatten_links: this option will show all servers in /links appear
911     * that they are linked to this current server
912     *
913     * EFnet Note: While this is not a requirement on EFnet, it
914     * may be a good idea. Except, it's useless
915     * unless the entire net runs it.
916     */
917 michael 951 flatten_links = no;
918 adx 30
919     /*
920     * links_delay: how often to update the links file when it is
921     * flattened.
922     */
923     links_delay = 5 minutes;
924    
925     /*
926     * hidden: hide this server from a /links output on servers that
927 michael 583 * support it. This allows hub servers to be hidden etc.
928 adx 30 */
929     hidden = no;
930    
931     /*
932     * disable_hidden: prevent servers hiding themselves from a
933     * /links output.
934     */
935     disable_hidden = no;
936    
937     /*
938     * hide_servers: hide remote servernames everywhere and instead use
939     * hidden_name and network_desc.
940     */
941     hide_servers = no;
942    
943     /*
944     * Use this as the servername users see if hide_servers = yes.
945     */
946 michael 583 hidden_name = "*.hidden.com";
947 adx 30
948     /*
949 michael 951 * hide_server_ips: If this is disabled, opers will be unable to see
950     * servers ips and will be shown a masked ip, admins will be shown the
951     * real ip.
952 adx 30 *
953 michael 951 * If this is enabled, nobody can see a servers ip. *This is a kludge*,
954     * it has the side effect of hiding the ips everywhere, including
955     * logfiles.
956 adx 30 *
957     * We recommend you leave this disabled, and just take care with who you
958     * give admin=yes; to.
959     */
960     hide_server_ips = yes;
961     };
962    
963     /*
964 michael 583 * general {}: The general block contains many of the options that were once
965     * compiled in options in config.h. The general block is read at start time.
966 adx 30 */
967     general {
968 michael 951 /* max_watch: maximum WATCH entries a client can have. */
969 michael 876 max_watch = 64;
970    
971 adx 30 /*
972     * gline_min_cidr: the minimum required length of a CIDR bitmask
973     * for IPv4 based glines
974     */
975     gline_min_cidr = 16;
976    
977     /*
978     * gline_min_cidr6: the minimum required length of a CIDR bitmask
979     * for IPv6 based glines
980     */
981     gline_min_cidr6 = 48;
982    
983     /*
984     * Whether to automatically set mode +i on connecting users.
985     */
986     invisible_on_connect = yes;
987    
988     /*
989     * If you don't explicitly specify burst_away in your connect blocks, then
990     * they will default to the burst_away value below.
991     */
992     burst_away = no;
993    
994     /*
995     * Show "actually using host <ip>" on /whois when possible.
996     */
997     use_whois_actually = yes;
998    
999     /*
1000     * Max time from the nickname change that still causes KILL
1001     * automatically to switch for the current nick of that user. (seconds)
1002     */
1003     kill_chase_time_limit = 90;
1004 michael 951
1005 adx 30 /*
1006 michael 951 * If hide_spoof_ips is disabled, opers will be allowed to see the real
1007     * IP of spoofed users in /trace etc. If this is defined they will be
1008     * shown a masked IP.
1009 adx 30 */
1010     hide_spoof_ips = yes;
1011    
1012     /*
1013 michael 583 * Ignore bogus timestamps from other servers. Yes, this will desync
1014 adx 30 * the network, but it will allow chanops to resync with a valid non TS 0
1015     *
1016     * This should be enabled network wide, or not at all.
1017     */
1018     ignore_bogus_ts = no;
1019    
1020     /*
1021     * disable_auth: completely disable ident lookups; if you enable this,
1022     * be careful of what you set need_ident to in your auth {} blocks
1023     */
1024     disable_auth = no;
1025    
1026     /* disable_remote_commands: disable users doing commands on remote servers */
1027     disable_remote_commands = no;
1028    
1029     /*
1030 michael 583 * tkline_expire_notices: enables or disables temporary kline/xline
1031     * expire notices.
1032 adx 30 */
1033     tkline_expire_notices = no;
1034    
1035     /*
1036     * default_floodcount: the default value of floodcount that is configurable
1037     * via /quote set floodcount. This is the amount of lines a user
1038     * may send to any other user/channel in one second.
1039     */
1040     default_floodcount = 10;
1041    
1042     /*
1043     * failed_oper_notice: send a notice to all opers on the server when
1044     * someone tries to OPER and uses the wrong password, host or ident.
1045     */
1046     failed_oper_notice = yes;
1047    
1048     /*
1049     * dots_in_ident: the amount of '.' characters permitted in an ident
1050     * reply before the user is rejected.
1051     */
1052 michael 951 dots_in_ident = 2;
1053 adx 30
1054     /*
1055     * dot_in_ip6_addr: ircd-hybrid-6.0 and earlier will disallow hosts
1056 michael 583 * without a '.' in them. This will add one to the end. Only needed
1057 adx 30 * for older servers.
1058     */
1059     dot_in_ip6_addr = no;
1060    
1061     /*
1062     * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1063     * placed via the server. klines hand placed are exempt from limits.
1064     * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1065     */
1066     min_nonwildcard = 3;
1067    
1068     /*
1069     * min_nonwildcard_simple: the minimum non wildcard characters in
1070     * gecos bans. wildcard chars: '*' '?' '#'
1071     */
1072     min_nonwildcard_simple = 3;
1073    
1074     /* max_accept: maximum allowed /accept's for +g usermode */
1075     max_accept = 20;
1076    
1077     /* anti_nick_flood: enable the nickflood control code */
1078     anti_nick_flood = yes;
1079    
1080     /* nick flood: the nick changes allowed in the specified period */
1081     max_nick_time = 20 seconds;
1082     max_nick_changes = 5;
1083    
1084     /*
1085     * anti_spam_exit_message_time: the minimum time a user must be connected
1086     * before custom quit messages are allowed.
1087     */
1088     anti_spam_exit_message_time = 5 minutes;
1089    
1090     /*
1091     * ts delta: the time delta allowed between server clocks before
1092     * a warning is given, or before the link is dropped. all servers
1093     * should run ntpdate/rdate to keep clocks in sync
1094     */
1095     ts_warn_delta = 30 seconds;
1096     ts_max_delta = 5 minutes;
1097    
1098     /*
1099     * kline_with_reason: show the user the reason why they are k/d/glined
1100     * on exit. May give away who set k/dline when set via tcm.
1101     */
1102     kline_with_reason = yes;
1103    
1104     /*
1105     * kline_reason: show this message to users on channel
1106     * instead of the oper reason.
1107     */
1108     kline_reason = "Connection closed";
1109    
1110 michael 583 /*
1111     * reject_hold_time: wait this amount of time before disconnecting
1112     * a rejected client. Use 0 to disable.
1113     */
1114     reject_hold_time = 30 seconds;
1115 adx 30
1116     /*
1117     * warn_no_nline: warn opers about servers that try to connect but
1118     * we don't have a connect {} block for. Twits with misconfigured
1119     * servers can get really annoying with this enabled.
1120     */
1121     warn_no_nline = yes;
1122    
1123 michael 584 /*
1124     * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1125     * operators and administrators. Doing so is a good idea in case
1126     * there are any exempted (exempt{}) server IPs you don't want to
1127     * see leaked.
1128     */
1129     stats_e_disabled = no;
1130    
1131 adx 30 /* stats_o_oper only: make stats o (opers) oper only */
1132     stats_o_oper_only = yes;
1133    
1134     /* stats_P_oper_only: make stats P (ports) oper only */
1135     stats_P_oper_only = yes;
1136    
1137     /*
1138     * stats i oper only: make stats i (auth {}) oper only. set to:
1139     * yes: show users no auth blocks, made oper only.
1140     * masked: show users first matching auth block
1141     * no: show users all auth blocks.
1142     */
1143     stats_i_oper_only = yes;
1144    
1145     /*
1146     * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1147     * yes: show users no auth blocks, made oper only
1148     * masked: show users first matching auth block
1149     * no: show users all auth blocks.
1150     */
1151     stats_k_oper_only = yes;
1152 michael 583
1153 adx 30 /*
1154     * caller_id_wait: time between notifying a +g user that somebody
1155     * is messaging them.
1156     */
1157     caller_id_wait = 1 minute;
1158    
1159     /*
1160 michael 56 * opers_bypass_callerid: allows operators to bypass +g and message
1161     * anyone who has it set (useful if you use services).
1162     */
1163     opers_bypass_callerid = no;
1164    
1165     /*
1166 adx 30 * pace_wait_simple: time between use of less intensive commands
1167 adx 269 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1168 adx 30 */
1169     pace_wait_simple = 1 second;
1170    
1171     /*
1172     * pace_wait: time between more intensive commands
1173 adx 269 * (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1174 adx 30 */
1175     pace_wait = 10 seconds;
1176    
1177     /*
1178     * short_motd: send clients a notice telling them to read the motd
1179     * instead of forcing a motd to clients who may simply ignore it.
1180     */
1181     short_motd = no;
1182    
1183     /*
1184     * ping_cookie: require clients to respond exactly to a ping command,
1185     * can help block certain types of drones and FTP PASV mode spoofing.
1186     */
1187     ping_cookie = no;
1188    
1189     /* no_oper_flood: increase flood limits for opers. */
1190     no_oper_flood = yes;
1191    
1192     /*
1193     * true_no_oper_flood: completely eliminate flood limits for opers
1194     * and for clients with can_flood = yes in their auth {} blocks
1195     */
1196     true_no_oper_flood = yes;
1197    
1198     /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1199     oper_pass_resv = yes;
1200    
1201     /*
1202     * idletime: the maximum amount of time a user may idle before
1203     * they are disconnected
1204     */
1205     idletime = 0;
1206    
1207     /* REMOVE ME. The following line checks you've been reading. */
1208     havent_read_conf = 1;
1209    
1210     /*
1211     * max_targets: the maximum amount of targets in a single
1212     * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1213     */
1214     max_targets = 4;
1215    
1216     /*
1217     * client_flood: maximum amount of data in a clients queue before
1218     * they are dropped for flooding.
1219     */
1220     client_flood = 2560 bytes;
1221    
1222     /*
1223     * message_locale: the default message locale
1224     * Use "standard" for the compiled in defaults.
1225     * To install the translated messages, go into messages/ in the
1226     * source directory and run `make install'.
1227     */
1228     message_locale = "standard";
1229    
1230     /*
1231     * usermodes configurable: a list of usermodes for the options below
1232     *
1233     * +b - bots - See bot and drone flooding notices
1234     * +c - cconn - Client connection/quit notices
1235 db 853 * +C - cconn - Client connection/quit notices full
1236 adx 30 * +D - deaf - Don't receive channel messages
1237     * +d - debug - See debugging notices
1238     * +f - full - See I: line full notices
1239     * +G - softcallerid - Server Side Ignore for users not on your channels
1240     * +g - callerid - Server Side Ignore (for privmsgs etc)
1241     * +i - invisible - Not shown in NAMES or WHO unless you share a
1242     * a channel
1243     * +k - skill - See server generated KILL messages
1244     * +l - locops - See LOCOPS messages
1245     * +n - nchange - See client nick changes
1246     * +r - rej - See rejected client notices
1247     * +s - servnotice - See general server notices
1248     * +u - unauth - See unauthorized client notices
1249     * +w - wallop - See server generated WALLOPS
1250     * +x - external - See remote server connection and split notices
1251     * +y - spy - See LINKS, STATS, TRACE notices etc.
1252     * +z - operwall - See oper generated WALLOPS
1253     */
1254 michael 583
1255 adx 30 /* oper_only_umodes: usermodes only opers may set */
1256 db 853 oper_only_umodes = bots, cconn, cconn_full, debug, full, skill,
1257     nchange, rej, spy, external, operwall,
1258     locops, unauth;
1259 adx 30
1260     /* oper_umodes: default usermodes opers get when they /oper */
1261 adx 264 oper_umodes = bots, locops, servnotice, operwall, wallop;
1262 adx 30
1263     /*
1264     * servlink_path: path to 'servlink' program used by ircd to handle
1265     * encrypted/compressed server <-> server links.
1266     *
1267     * only define if servlink is not in same directory as ircd itself.
1268     */
1269     #servlink_path = "/usr/local/ircd/bin/servlink";
1270    
1271     /*
1272     * default_cipher_preference: default cipher to use for cryptlink when none is
1273     * specified in connect block.
1274     */
1275     #default_cipher_preference = "BF/168";
1276    
1277     /*
1278     * use_egd: if your system does not have *random devices yet you
1279     * want to use OpenSSL and encrypted links, enable this. Beware -
1280     * EGD is *very* CPU intensive when gathering data for its pool
1281     */
1282     # use_egd = yes;
1283    
1284     /*
1285     * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1286     * which automatically finds the path.
1287     */
1288     # egdpool_path = "/var/run/egd-pool";
1289    
1290    
1291     /*
1292     * compression_level: level of compression for compressed links between
1293     * servers.
1294     *
1295     * values are between: 1 (least compression, fastest)
1296     * and: 9 (most compression, slowest).
1297     */
1298     # compression_level = 6;
1299    
1300     /*
1301     * throttle_time: the minimum amount of time between connections from
1302     * the same ip. exempt {} blocks are excluded from this throttling.
1303     * Offers protection against flooders who reconnect quickly.
1304     * Set to 0 to disable.
1305     */
1306     throttle_time = 0;
1307     };
1308    
1309     glines {
1310     /*
1311     * EFnet Note: This feature is required for European EFnet servers
1312     * and is used by several North American servers. As
1313     * such, it has been left on by default. If you
1314     * do not want your server to participate in G:Lines
1315     * you should disable this.
1316     */
1317    
1318     /* enable: enable glines, network wide temp klines */
1319     enable = yes;
1320    
1321 michael 583 /*
1322     * duration: the amount of time a gline will remain on your
1323     * server before expiring
1324     */
1325 adx 30 duration = 1 day;
1326    
1327 michael 583 /*
1328     * logging: which types of rules you want to log when triggered
1329     * (choose reject or block)
1330     */
1331 adx 30 logging = reject, block;
1332    
1333     /*
1334 michael 583 * NOTE: gline ACLs can cause a desync of glines throughout the
1335     * network, meaning some servers may have a gline triggered, and
1336     * others may not. Also, you only need insert rules for glines
1337     * that you want to block and/or reject. If you want to accept and
1338     * propagate the gline, do NOT put a rule for it.
1339 adx 30 */
1340    
1341     /* user@host for rule to apply to */
1342     user = "god@I.still.hate.packets";
1343     /* server for rule to apply to */
1344     name = "hades.arpa";
1345    
1346     /*
1347     * action: action to take when a matching gline is found. options are:
1348     * reject - do not apply the gline locally
1349     * block - do not propagate the gline
1350     */
1351     action = reject, block;
1352    
1353     user = "god@*";
1354     name = "*";
1355     action = block;
1356     };
1357    
1358     modules {
1359     /*
1360 michael 951 * path: other paths to search for modules specified below
1361 adx 30 * and in /modload.
1362     */
1363 michael 912 path = "@LIBDIR@/modules";
1364     path = "@LIBDIR@/modules/autoload";
1365 adx 30
1366     /* module: the name of a module to load on startup/rehash */
1367     #module = "some_module.so";
1368     };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28