/[svn]/ircd-hybrid-7.2/etc/example.efnet.conf.in
ViewVC logotype

Annotation of /ircd-hybrid-7.2/etc/example.efnet.conf.in

Parent Directory Parent Directory | Revision Log Revision Log


Revision 853 - (hide annotations)
Thu Feb 22 06:01:30 2007 UTC (13 years, 4 months ago) by db
Original Path: ircd-hybrid-7.2/etc/example.efnet.conf
File size: 38535 byte(s)
- fix typo in ircd_parser.y regenerate y.tab.c and lex.yy.c
- fix order shown in CLIEXIT
- remove mode parsing in ms_join
- reflect addiction cconn_full flag


1 michael 584 /* doc/example.efnet.conf - ircd-hybrid-7 EFnet Example configuration file
2 michael 583 * Copyright (C) 2000-2006 Hybrid Development Team
3 adx 30 *
4     * Written by ejb, wcampbel, db, leeh and others
5     * Other example configurations can be found in the source dir under
6     * etc/.
7     *
8 knight 31 * $Id$
9 adx 30 */
10    
11     /* IMPORTANT NOTES:
12     *
13     * auth {} blocks MUST be specified in order of precedence. The first one
14     * that matches a user will be used. So place spoofs first, then specials,
15     * then general access.
16     *
17     * Shell style (#), C++ style (//) and C style comments are supported.
18     *
19     * Files may be included by either:
20     * .include "filename"
21     * .include <filename>
22     *
23     * Times/durations are written as:
24     * 12 hours 30 minutes 1 second
25     *
26     * Valid units of time:
27     * month, week, day, hour, minute, second
28     *
29     * Valid units of size:
30     * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31     *
32     * Sizes and times may be singular or plural.
33     */
34    
35     /* EFNET NOTE:
36 michael 583 *
37 adx 30 * This configuration file is a BASIC configuration file for use
38     * on EFnet. You MUST still take the time to set this file up
39     * properly.
40     *
41     * DISCLAIMER: This file was submitted by Disciple@EFnet and has
42     * since been modified by the Hybrid team.
43     */
44    
45 michael 583 /*
46     * serverinfo {}: contains information about the server. (OLD M:)
47     */
48 adx 30 serverinfo {
49 michael 583 /*
50     * name: the name of our server. This cannot be changed at runtime.
51     */
52 adx 30 name = "efnet.irc";
53    
54     /*
55 michael 583 * sid: a server's unique ID. This is three characters long and must
56     * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
57     * a digit, followed by 2 alpha-numerical letters.
58     * NOTE: The letters must be capitalized. This cannot be changed at runtime.
59 adx 30 */
60     sid = "_CHANGE_ME_";
61    
62     /*
63     * description: the description of the server. '[' and ']' may not
64     * be used here for compatibility with older servers.
65     */
66     description = "hybrid-7 test server";
67    
68     /*
69     * network info: the name and description of the network this server
70     * is on. Shown in the 005 reply and used with serverhiding.
71     */
72     network_name = "EFnet";
73     network_desc = "Eris Free Network";
74    
75     /*
76     * hub: allow this server to act as a hub and have multiple servers
77     * connected to it. This may not be changed if there are active
78     * LazyLink servers.
79     */
80     hub = no;
81    
82     /*
83     * vhost: the IP to bind to when we connect outward to ipv4 servers.
84     * This should be an ipv4 IP only, or "* for INADDR_ANY.
85     */
86     #vhost = "192.169.0.1";
87    
88     /*
89     * vhost6: the IP to bind to when we connect outward to ipv6 servers.
90     * This should be an ipv6 IP only, or "* for INADDR_ANY.
91     */
92     #vhost6 = "3ffe:80e8:546::2";
93    
94     /* max_clients: the maximum number of clients allowed to connect */
95     max_clients = 512;
96    
97     /*
98     * rsa key: the path to the file containing our rsa key for cryptlink.
99     *
100     * Example command to store a 2048 bit RSA keypair in
101     * rsa.key, and the public key in rsa.pub:
102     *
103     * openssl genrsa -out rsa.key 2048
104     * openssl rsa -in rsa.key -pubout -out rsa.pub
105     * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
106     * chmod 0600 rsa.key
107     * chmod 0644 rsa.pub
108     */
109     #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
110     };
111    
112 michael 583 /*
113     * admin {}: contains admin information about the server. (OLD A:)
114     */
115 adx 30 admin {
116     name = "EFnet Admin";
117     description = "Main Server Administrator";
118     email = "<irc-admin@efnet.irc>";
119     };
120    
121 michael 583 /*
122     * log {}: contains information about logfiles.
123     */
124     log {
125 adx 30 /* Do you want to enable logging to ircd.log? */
126     use_logging = yes;
127    
128     /*
129     * logfiles: the logfiles to use for user connects, /oper uses,
130     * and failed /oper. These files must exist for logging to be used.
131     */
132 michael 583 fname_userlog = "logs/userlog";
133     fname_operlog = "logs/operlog";
134     fname_killlog = "logs/kill";
135     fname_klinelog = "logs/kline";
136     fname_glinelog = "logs/gline";
137 adx 30
138     /*
139 michael 583 * log_level: the amount of detail to log in ircd.log. The
140 adx 30 * higher, the more information is logged. May be changed
141     * once the server is running via /quote SET LOG. Either:
142     * L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
143     */
144     log_level = L_INFO;
145     };
146    
147 michael 583 /*
148     * class {}: contains information about classes for users (OLD Y:)
149     */
150 adx 30 class {
151     /* name: the name of the class. classes are text now */
152     name = "users";
153    
154     /*
155     * ping_time: how often a client must reply to a PING from the
156     * server before they are dropped.
157     */
158     ping_time = 90 seconds;
159    
160 michael 583 /*
161     * number_per_ip: how many local users are allowed to connect
162     * from one IP (optional)
163     */
164 adx 30 number_per_ip = 2;
165    
166 michael 583 /*
167     * max_local: how many local users are allowed to connect
168     * from one ident@host (optional)
169     */
170 adx 30 max_local = 2;
171    
172 michael 583 /*
173     * max_global: network-wide limit of users per ident@host (optional)
174     */
175 adx 30 max_global = 10;
176    
177 michael 583 /*
178     * max_number: the maximum number of users allowed in this class (optional)
179     */
180 adx 30 max_number = 100;
181    
182 michael 583 /*
183     * the following lines are optional and allow you to define
184     * how many users can connect from one /NN subnet
185     */
186     cidr_bitlen_ipv4 = 24;
187     cidr_bitlen_ipv6 = 120;
188     number_per_cidr = 16;
189 adx 40
190 adx 30 /*
191     * sendq: the amount of data allowed in a clients queue before
192     * they are dropped.
193     */
194     sendq = 100 kbytes;
195     };
196    
197     class {
198     name = "opers";
199    
200     /*
201     * contrary to seeming popular belief, setting ping time
202     * higher for an oper is NOT doing them a favor.
203     * Since if a link is dead its dead and it means
204     * you have to use another nick long enough to kill the old one :-)
205     * Its much better to use a fairly standard 90 second ping time
206     */
207     ping_time = 90 seconds;
208     number_per_ip = 10;
209     max_number = 100;
210     sendq = 1 mbyte;
211     };
212    
213     class {
214     name = "server";
215    
216     /*
217 michael 583 * Same thing here. It's a fallacy to think increasing
218 adx 30 * ping time for servers is a "good idea." All it leads to
219     * is "ghosting" on one end. Not a good idea.
220     */
221     ping_time = 90 seconds;
222    
223 michael 583 /*
224     * ping_warning: how fast a server must reply to a PING before
225     * a warning to opers is generated.
226     */
227     ping_warning = 15 seconds;
228 adx 30
229     /*
230     * connectfreq: only used in server classes. Specifies the delay
231     * between autoconnecting to servers.
232     *
233     * Both comstud and I recommend 10 minutes a few years ago.
234     * 15 minutes might be right now. The reason you don't want it too
235     * low is, you make the servers reconnect too quickly with
236     * a large sendq, and they _will_ nick collide. badly. 5 minutes
237     * IS way too short.
238     */
239     connectfreq = 15 minutes;
240    
241     /* max number: the amount of servers to autoconnect to */
242     max_number = 1;
243    
244 michael 583 /* sendq: servers need a higher sendq as they send more data */
245 adx 30 sendq = 15 megabytes;
246     };
247    
248 michael 583 /*
249     * listen {}: contains information about the ports ircd listens on (OLD P:)
250     */
251 adx 30 listen {
252     /*
253     * port: the specific port to listen on. If no host is specified
254     * before, it will listen on all available IPs.
255     *
256     * Ports are separated via a comma, a range may be specified using ".."
257     */
258    
259     /* port: listen on all available IPs, ports 6665 to 6669 */
260     port = 6665 .. 6669;
261    
262     /*
263     * Listen on 192.168.0.1/7023 and hidden from STATS P
264     * unless you are an administrator.
265     *
266     * NOTE: The "flags" directive has to come before "port". Always!
267     */
268     flags = hidden;
269     host = "192.168.0.1";
270     port = 7023;
271    
272     /*
273     * host: set a specific IP/host the ports after the line will listen
274     * on. This may be ipv4 or ipv6.
275     */
276     host = "1.2.3.4";
277     port = 7000, 7001;
278    
279     host = "3ffe:1234:a:b:c::d";
280     port = 7002;
281     };
282    
283 michael 583 /*
284     * auth {}: allow users to connect to the ircd (OLD I:)
285     */
286 adx 30 auth {
287     /*
288     * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
289     * lines are permitted per auth block.
290     */
291     user = "*@172.16.0.0/12";
292     user = "*test@123D:B567:*";
293    
294     /* password: an optional password that is required to use this block */
295     password = "letmein";
296    
297     /*
298     * encrypted: controls whether the auth password above has been
299     * encrypted.
300     */
301     encrypted = yes;
302    
303     /*
304     * spoof: fake the users host to this. This is free-form,
305     * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
306     */
307     spoof = "I.still.hate.packets";
308    
309     /* class: the class the user is placed in */
310     class = "opers";
311    
312     /*
313     * need_password: don't allow users who haven't supplied the correct
314     * password to connect using another auth{} block
315     * ('&' prefix on /stats I if disabled)
316     * need_ident: require the user to have identd to connect ('+' prefix on /stats I)
317     * spoof_notice: enable spoofing notification to admins
318     * exceed_limit: allow a user to exceed class limits ('>' prefix on /stats I)
319     * kline_exempt: exempt this user from k/glines ('^' prefix on /stats I)
320     * gline_exempt: exempt this user from glines ('_' prefix on /stats I)
321     * resv_exempt: exempt this user from resvs ('$' prefix on /stats I)
322     * no_tilde: remove ~ from a user with no ident ('-' prefix on /stats I)
323     * can_flood: allow this user to exceed flood limits ('|' prefix on /stats I)
324 michael 390 * can_idle: exempt this user from idle restrictions ('<' prefix on /stats I)
325 adx 30 */
326     flags = need_password, spoof_notice, exceed_limit, kline_exempt,
327     gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
328     };
329    
330     auth {
331     /*
332     * redirect: the server and port to redirect a user to. A user does
333     * not have to obey the redirection, the ircd just suggests an alternative
334     * server for them.
335     */
336 db 806 redirserv = "this.is.not.a.real.server";
337 adx 30 redirport = 6667;
338    
339 db 806 user = "*.server";
340 adx 30
341     /* class: a class is required even though it is not used */
342     class = "users";
343     };
344    
345     auth {
346     user = "*@*";
347     class = "users";
348     flags = need_ident;
349     };
350    
351 michael 583 /*
352     * operator {}: defines ircd operators. (OLD O:)
353     *
354 adx 30 * ircd-hybrid no longer supports local operators, privileges are
355     * controlled via flags.
356     */
357     operator {
358     /* name: the name of the oper */
359 michael 583 /* NOTE: operator "opername"{} is also supported */
360 adx 30 name = "god";
361    
362     /*
363     * user: the user@host required for this operator. CIDR is not
364     * supported. Multiple user="" lines are supported.
365     */
366     user = "*god@*";
367     user = "*@127.0.0.1";
368    
369     /*
370     * password: the password required to oper. By default this will
371     * need to be encrypted using 'mkpasswd'. MD5 is supported.
372     */
373     password = "etcnjl8juSU1E";
374    
375     /*
376     * encrypted: controls whether the oper password above has been
377     * encrypted. (OLD CRYPT_OPER_PASSWORD now optional per operator)
378     */
379     encrypted = yes;
380    
381     /*
382     * rsa_public_key_file: the public key for this oper when using Challenge.
383     * A password should not be defined when this is used, see
384     * doc/challenge.txt for more information.
385     */
386     # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
387    
388     /* class: the class the oper joins when they successfully /oper */
389     class = "opers";
390    
391     /*
392 michael 56 * umodes: default usermodes opers get when they /oper. If defined,
393     * it will override oper_umodes settings in general {}.
394     * Available usermodes:
395     *
396     * +b - bots - See bot and drone flooding notices
397     * +c - cconn - Client connection/quit notices
398 db 853 * +C - cconn_full - Client connection/quit notices full
399 michael 56 * +D - deaf - Don't receive channel messages
400     * +d - debug - See debugging notices
401     * +f - full - See I: line full notices
402     * +G - softcallerid - Server Side Ignore for users not on your channels
403     * +g - callerid - Server Side Ignore (for privmsgs etc)
404     * +i - invisible - Not shown in NAMES or WHO unless you share a
405     * a channel
406     * +k - skill - See server generated KILL messages
407     * +l - locops - See LOCOPS messages
408     * +n - nchange - See client nick changes
409     * +r - rej - See rejected client notices
410     * +s - servnotice - See general server notices
411     * +u - unauth - See unauthorized client notices
412     * +w - wallop - See server generated WALLOPS
413     * +x - external - See remote server connection and split notices
414     * +y - spy - See LINKS, STATS, TRACE notices etc.
415     * +z - operwall - See oper generated WALLOPS
416     */
417     # umodes = locops, servnotice, operwall, wallop;
418    
419     /*
420 adx 30 * privileges: controls the activities and commands an oper is
421     * allowed to do on the server. All options default to no.
422     * Available options:
423     *
424     * global_kill: allows remote users to be /KILL'd (OLD 'O' flag)
425     * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
426     * remoteban: allows remote KLINE/UNKLINE
427     * kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
428     * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
429     * gline: allows GLINE (OLD 'G' flag)
430 michael 583 * xline: allows XLINE (OLD 'X' flag)
431 adx 30 * operwall: allows OPERWALL
432     * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
433     * via usermode +n
434     * rehash: allows oper to REHASH config (OLD 'H' flag)
435     * die: allows DIE and RESTART (OLD 'D' flag)
436     * admin: gives admin privileges. admins
437     * may (un)load modules and see the
438     * real IPs of servers.
439     * hidden_admin: same as 'admin', but noone can recognize you as
440 michael 583 * being an admin
441 adx 30 * hidden_oper: not shown in /stats p (except for other operators)
442     */
443     /* You can either use
444     * die = yes;
445     * rehash = yes;
446     *
447     * or in a flags statement i.e.
448     * flags = die, rehash;
449     *
450     * You can also negate a flag with ~ i.e.
451     * flags = ~remote;
452     *
453     */
454     flags = global_kill, remote, kline, unkline, xline,
455     die, rehash, nick_changes, admin, operwall;
456     };
457    
458 michael 583 /*
459     * connect {}: controls servers we connect to (OLD C:, N:, H:, L:)
460     */
461 adx 30 connect {
462     /* name: the name of the server */
463     name = "irc.uplink.com";
464    
465     /*
466     * host: the host or IP to connect to. If a hostname is used it
467     * must match the reverse dns of the server.
468     */
469     host = "192.168.0.1";
470    
471 michael 583 /*
472     * vhost: the IP to bind to when we connect outward to servers.
473     * serverinfo::vhost and serverinfo::vhost6 will be overridden
474     * by this directive.
475     */
476     vhost = "192.168.0.2";
477 michael 548
478 adx 30 /*
479     * passwords: the passwords we send (OLD C:) and accept (OLD N:).
480     * The remote server will have these passwords reversed.
481     */
482     send_password = "password";
483     accept_password = "anotherpassword";
484    
485     /*
486     * encrypted: controls whether the accept_password above has been
487     * encrypted. (OLD CRYPT_LINK_PASSWORD now optional per connect)
488     */
489     encrypted = no;
490    
491     /* port: the port to connect to this server on */
492     port = 6666;
493    
494     /*
495 michael 583 * hub_mask: the mask of servers that this server may hub. Multiple
496 adx 30 * entries are permitted
497     */
498     hub_mask = "*";
499    
500     /*
501     * leaf_mask: the mask of servers this server may not hub. Multiple
502     * entries are permitted. Useful for forbidding EU -> US -> EU routes.
503     */
504     # leaf_mask = "*.uk";
505    
506 michael 583 /* fakename: the servername we pretend to be when we connect */
507 adx 30 # fakename = "*.arpa";
508    
509     /* class: the class this server is in */
510     class = "server";
511    
512     /*
513 michael 124 * autoconn: controls whether we autoconnect to this server or not,
514 michael 583 * dependent on class limits. By default, this is disabled.
515 adx 30 * compressed: controls whether traffic is compressed via ziplinks.
516     * By default, this is disabled
517     * lazylink: controls whether this server is a LazyLink. LazyLink
518     * servers may NOT hub. See doc/LazyLinks.txt
519     *
520     * EFnet Note: With this enabled, you download a connect burst
521     * as it is needed, instead of all at once. This
522     * could allow servers on much smaller lines (T1s)
523     * to link a server. It also could allow a server
524     * on a DoS'ed link to stay connected.
525     * This makes client servers
526     * cheaper to run. EFnet needs more client servers.
527     *
528     * cryptlink: enable full encryption for all data passing between our
529     * server and this link and rsa authentication.
530     * burst_away: This will send the /away string that users have set
531 michael 583 * on the server burst. Note this can be a lot of data
532 adx 30 * and slow down your server burst.
533 michael 330 * topicburst: Send topics to this server during channel burst. Works
534     * only if the server we are connecting to is capable
535     * of TBURST/TB.
536 adx 30 */
537 michael 330 # flags = autoconn, lazylink, compressed, cryptlink, burst_away, topicburst;
538 adx 30 };
539    
540     connect {
541     name = "encrypted.auth.example";
542     host = "some.host.somewhere";
543     port = 6667;
544    
545     flags = cryptlink;
546    
547     /*
548     * rsa_public_key_file: the path to the public keyfile of the server.
549     * Used instead of passwords.
550     */
551     rsa_public_key_file = "etc/remote.server.keyfile";
552    
553     /*
554     * cipher preference: set the preferred cipher for this link
555     *
556     * Available ciphers are:
557     * BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
558     * RC5.12/128 RC5.8/128 3DES/168 DES/56
559     *
560     * NOTE: Some ciphers may not be supported by your OpenSSL.
561     * Check the output from 'configure' for available ciphers.
562     *
563     * NOTE2: To help you decide what cipher to use, tools/encspeed
564     * will show you approximately how fast each cipher is.
565     * However, blowfish is fast and secure, and is probably
566     * a good default for most situations.
567     *
568     * NOTE3: Default if none is set is BF/128
569     *
570     * The cipher *MUST* be the same in both directions. If you
571     * set a cipher preference, your uplink must set the same cipher,
572     * else it will not link.
573     */
574     # cipher_preference = "BF/168";
575     };
576    
577     /*
578 michael 583 * NOTE: Don't add an extra 'name=' entry if you use
579 adx 30 * the connect "name"{} feature
580     */
581     connect "ipv6.some.server" {
582     host = "3ffd:dead:beef::1";
583     send_password = "password";
584     accept_password = "password";
585     port = 6666;
586    
587     /*
588     * aftype: controls whether the connection uses "ipv4" or "ipv6".
589     * Default is ipv4.
590     */
591     aftype = ipv6;
592     class = "server";
593     };
594    
595 michael 583 /*
596     * cluster {}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
597 adx 30 * automatically (OLD hyb6 SLAVE_SERVERS)
598     */
599     cluster {
600 michael 583 /*
601     * name: the server to share with, this can take wildcards
602     *
603     * NOTE: only local actions will be clustered, meaning if
604 adx 30 * the server receives a shared kline/unkline/etc, it
605     * will not be propagated to clustered servers.
606     *
607     * Remote servers are not necessarily required to accept
608     * clustered lines, they need a shared{} for *THIS* server
609     * in order to accept them.
610     */
611     name = "*.arpa";
612    
613     /*
614     * type: list of what to share, options are as follows:
615     * kline - share klines
616     * tkline - share temporary klines
617     * unkline - share unklines
618     * xline - share xlines
619     * txline - share temporary xlines
620     * unxline - share unxlines
621     * resv - share resvs
622     * tresv - share temporary resvs
623     * unresv - share unresvs
624     * locops - share locops
625     * all - share all of the above (default)
626     */
627     type = kline, unkline, locops, xline, resv;
628     };
629    
630 michael 583 /*
631     * shared {}: users that are allowed to remote kline (OLD U:)
632 adx 30 *
633 michael 583 * NOTE: This can be effectively used for remote klines.
634     * Please note that there is no password authentication
635     * for users setting remote klines. You must also be
636     * /oper'd in order to issue a remote kline.
637 adx 30 */
638     shared {
639     /*
640     * name: the server the user must be on to set klines. If this is not
641     * specified, the user will be allowed to kline from all servers.
642     */
643     name = "irc2.some.server";
644    
645     /*
646     * user: the user@host mask that is allowed to set klines. If this is
647     * not specified, all users on the server above will be allowed to set
648     * a remote kline.
649     */
650     user = "oper@my.host.is.spoofed";
651    
652     /*
653     * type: list of what to share, options are as follows:
654     * kline - allow oper/server to kline
655     * tkline - allow temporary klines
656     * unkline - allow oper/server to unkline
657     * xline - allow oper/server to xline
658     * txline - allow temporary xlines
659     * unxline - allow oper/server to unxline
660     * resv - allow oper/server to resv
661     * tresv - allow temporary resvs
662     * unresv - allow oper/server to unresv
663     * locops - allow oper/server to locops - only used for servers that cluster
664     * all - allow oper/server to do all of the above (default)
665     */
666     type = kline, unkline, resv;
667     };
668    
669 michael 583 /*
670     * kill {}: users that are not allowed to connect (OLD K:)
671 adx 30 * Oper issued klines will be added to the specified kline config
672     */
673     kill {
674     user = "bad@*.hacked.edu";
675     reason = "Obviously hacked account";
676     };
677    
678     kill {
679     user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.org$";
680     type = regex;
681     };
682    
683 michael 583 /*
684     * deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
685 adx 30 * Oper issued dlines will be added to the specified dline config
686     */
687     deny {
688     ip = "10.0.1.0/24";
689     reason = "Reconnecting vhosted bots";
690     };
691    
692 michael 583 /*
693     * exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:)
694 adx 30 *
695 michael 584 * EFnet Note: We really suggest to enable general::stats_e_disabled
696     * if you plan to exempt EFnet server IPs you don't want to show to
697     * other operators and/or administrators through "STATS e".
698 adx 30 */
699     exempt {
700     ip = "192.168.0.0/16";
701     };
702    
703 michael 583 /*
704     * resv {}: nicks and channels users may not use/join (OLD Q:)
705     */
706 adx 30 resv {
707     /* reason: the reason for the proceeding resv's */
708     reason = "There are no services on this network";
709    
710     /* resv: the nicks and channels users may not join/use */
711     nick = "nickserv";
712     nick = "chanserv";
713     nick = "operserv";
714     nick = "JUPES";
715     nick = "JUPE";
716     nick = "CH?NF?X"; # CHANFIX (services.int)
717    
718     /* These are totally optional, but may be a good idea */
719     nick = "oper";
720     nick = "ircop";
721     nick = "op";
722     nick = "ident";
723     nick = "pass";
724     channel = "#jupedchan";
725    
726     /* resv: wildcard masks are also supported in nicks only */
727     reason = "Clone bots";
728     nick = "clone*";
729     };
730    
731 michael 583 /*
732     * gecos {}: The X: replacement, used for banning users based on
733     * their "realname".
734 adx 30 */
735     gecos {
736     name = "*sex*";
737     reason = "Possible spambot";
738     };
739    
740     gecos {
741     name = "sub7server";
742     reason = "Trojan drone";
743     };
744    
745     gecos {
746     name = "*http*";
747     reason = "Spambot";
748     };
749    
750     gecos {
751     name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
752     type = regex;
753     };
754    
755     /*
756 michael 583 * channel {}: The channel block contains options pertaining to channels
757 adx 30 */
758     channel {
759 michael 56 /*
760 michael 632 * disable_fake_channels: this option, if set to 'yes', will
761     * disallow clients to create or join channels that have one
762     * of the following ASCII characters in their name:
763     *
764     * 2 | bold
765     * 3 | mirc color
766 michael 639 * 15 | plain text
767 michael 632 * 22 | reverse
768     * 31 | underline
769     * 160 | non-breaking space
770     */
771     disable_fake_channels = yes;
772    
773     /*
774 michael 56 * restrict_channels: reverse channel RESVs logic, only reserved
775     * channels are allowed
776     */
777     restrict_channels = no;
778 adx 30
779     /*
780     * disable_local_channels: prevent users from joining &channels.
781     */
782     disable_local_channels = no;
783    
784     /*
785     * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
786     * that can join a +i channel without an invite.
787     */
788     use_invex = yes;
789    
790     /*
791     * use_except: Enable/disable channel mode +e, a n!u@h list of masks
792     * that can join a channel through a ban (+b).
793     */
794     use_except = yes;
795    
796     /*
797     * use_knock: Allows users to request an invite to a channel that
798     * is locked somehow (+ikl). If the channel is +p or you are banned
799     * the knock will not be sent.
800     *
801     * EFnet Note: This seems to be used mostly by European servers
802     * and not North American ones.
803 michael 583 * Please feel free to disable this if you do not
804     * want to run channel knock.
805 adx 30 * channel knock allows an user to "/quote knock #channel"
806 michael 583 * to ask for an invite. It is typically used in eu-efnet
807 adx 30 * to ask for an invite to #eu-opers.
808 adx 201 * A user who is banned will not have their knock
809 michael 583 * sent to channel. It is paced, so knock will not
810 adx 30 * cause a flood.
811     */
812     use_knock = yes;
813    
814     /*
815     * knock_delay: The amount of time a user must wait between issuing
816     * the knock command.
817     */
818     knock_delay = 1 minutes;
819    
820     /*
821     * knock_delay_channel: How often a knock to any specific channel
822     * is permitted, regardless of the user sending the knock.
823     */
824     knock_delay_channel = 1 minute;
825    
826 michael 583 /*
827     * burst_topicwho: enable sending of who set topic on topicburst
828     * default is yes
829     */
830 adx 201 burst_topicwho = yes;
831 adx 30
832 michael 583 /*
833     * max_chans_per_user: The maximum number of channels a user can
834     * join/be on.
835     */
836 adx 30 max_chans_per_user = 25;
837    
838     /* quiet_on_ban: stop banned people talking in channels. */
839     quiet_on_ban = yes;
840    
841     /* max_bans: maximum number of +b/e/I modes in a channel */
842     max_bans = 100;
843    
844     /*
845 adx 201 * how many joins in how many seconds constitute a flood, use 0 to
846     * disable. +b opers will be notified (changeable via /set)
847     */
848     join_flood_count = 16;
849     join_flood_time = 8 seconds;
850    
851     /*
852 adx 30 * splitcode: The ircd will now check splitmode every few seconds.
853     *
854     * Either split users or split servers can activate splitmode, but
855     * both conditions must be met for the ircd to deactivate splitmode.
856     *
857     * You may force splitmode to be permanent by /quote set splitmode on
858     */
859    
860     /*
861     * default_split_user_count: when the usercount is lower than this level,
862     * consider ourselves split. This must be set for automatic splitmode.
863     */
864     default_split_user_count = 40000;
865    
866     /*
867     * default_split_server_count: when the servercount is lower than this,
868     * consider ourselves split. This must be set for automatic splitmode.
869     */
870     default_split_server_count = 10;
871    
872     /* split no create: disallow users creating channels on split. */
873     no_create_on_split = yes;
874    
875     /* split: no join: disallow users joining channels at all on a split */
876     no_join_on_split = no;
877     };
878    
879     /*
880 michael 583 * serverhide {}: The serverhide block contains the options regarding
881     * serverhiding
882 adx 30 */
883     serverhide {
884     /*
885     * flatten_links: this option will show all servers in /links appear
886     * that they are linked to this current server
887     *
888     * EFnet Note: While this is not a requirement on EFnet, it
889     * may be a good idea. Except, it's useless
890     * unless the entire net runs it.
891     */
892     flatten_links = yes;
893    
894     /*
895     * links_delay: how often to update the links file when it is
896     * flattened.
897     */
898     links_delay = 5 minutes;
899    
900     /*
901     * hidden: hide this server from a /links output on servers that
902 michael 583 * support it. This allows hub servers to be hidden etc.
903 adx 30 */
904     hidden = no;
905    
906     /*
907     * disable_hidden: prevent servers hiding themselves from a
908     * /links output.
909     */
910     disable_hidden = no;
911    
912     /*
913     * hide_servers: hide remote servernames everywhere and instead use
914     * hidden_name and network_desc.
915     */
916     hide_servers = no;
917    
918     /*
919     * Use this as the servername users see if hide_servers = yes.
920     */
921 michael 583 hidden_name = "*.hidden.com";
922 adx 30
923     /*
924     * hide_server_ips: If this is disabled, opers will be unable to see servers
925     * ips and will be shown a masked ip, admins will be shown the real ip.
926     *
927     * If this is enabled, nobody can see a servers ip. *This is a kludge*, it
928     * has the side effect of hiding the ips everywhere, including logfiles.
929     *
930     * We recommend you leave this disabled, and just take care with who you
931     * give admin=yes; to.
932     */
933     hide_server_ips = yes;
934     };
935    
936     /*
937 michael 583 * general {}: The general block contains many of the options that were once
938     * compiled in options in config.h. The general block is read at start time.
939 adx 30 */
940     general {
941     /*
942     * gline_min_cidr: the minimum required length of a CIDR bitmask
943     * for IPv4 based glines
944     */
945     gline_min_cidr = 16;
946    
947     /*
948     * gline_min_cidr6: the minimum required length of a CIDR bitmask
949     * for IPv6 based glines
950     */
951     gline_min_cidr6 = 48;
952    
953     /*
954     * Whether to automatically set mode +i on connecting users.
955     */
956     invisible_on_connect = yes;
957    
958     /*
959     * If you don't explicitly specify burst_away in your connect blocks, then
960     * they will default to the burst_away value below.
961     */
962     burst_away = no;
963    
964     /*
965     * Show "actually using host <ip>" on /whois when possible.
966     */
967     use_whois_actually = yes;
968    
969     /*
970     * Max time from the nickname change that still causes KILL
971     * automatically to switch for the current nick of that user. (seconds)
972     */
973     kill_chase_time_limit = 90;
974    
975     /*
976     * If hide_spoof_ips is disabled, opers will be allowed to see the real IP of spoofed
977 michael 583 * users in /trace etc. If this is defined they will be shown a masked IP.
978 adx 30 */
979     hide_spoof_ips = yes;
980    
981     /*
982 michael 583 * Ignore bogus timestamps from other servers. Yes, this will desync
983 adx 30 * the network, but it will allow chanops to resync with a valid non TS 0
984     *
985     * This should be enabled network wide, or not at all.
986     */
987     ignore_bogus_ts = no;
988    
989     /*
990     * disable_auth: completely disable ident lookups; if you enable this,
991     * be careful of what you set need_ident to in your auth {} blocks
992     */
993     disable_auth = no;
994    
995     /* disable_remote_commands: disable users doing commands on remote servers */
996     disable_remote_commands = no;
997    
998     /*
999 michael 583 * tkline_expire_notices: enables or disables temporary kline/xline
1000     * expire notices.
1001 adx 30 */
1002     tkline_expire_notices = no;
1003    
1004     /*
1005     * default_floodcount: the default value of floodcount that is configurable
1006     * via /quote set floodcount. This is the amount of lines a user
1007     * may send to any other user/channel in one second.
1008     */
1009     default_floodcount = 10;
1010    
1011     /*
1012     * failed_oper_notice: send a notice to all opers on the server when
1013     * someone tries to OPER and uses the wrong password, host or ident.
1014     */
1015     failed_oper_notice = yes;
1016    
1017     /*
1018     * dots_in_ident: the amount of '.' characters permitted in an ident
1019     * reply before the user is rejected.
1020     */
1021     dots_in_ident = 0;
1022    
1023     /*
1024     * dot_in_ip6_addr: ircd-hybrid-6.0 and earlier will disallow hosts
1025 michael 583 * without a '.' in them. This will add one to the end. Only needed
1026 adx 30 * for older servers.
1027     */
1028     dot_in_ip6_addr = no;
1029    
1030     /*
1031     * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1032     * placed via the server. klines hand placed are exempt from limits.
1033     * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1034     */
1035     min_nonwildcard = 3;
1036    
1037     /*
1038     * min_nonwildcard_simple: the minimum non wildcard characters in
1039     * gecos bans. wildcard chars: '*' '?' '#'
1040     */
1041     min_nonwildcard_simple = 3;
1042    
1043     /* max_accept: maximum allowed /accept's for +g usermode */
1044     max_accept = 20;
1045    
1046     /* anti_nick_flood: enable the nickflood control code */
1047     anti_nick_flood = yes;
1048    
1049     /* nick flood: the nick changes allowed in the specified period */
1050     max_nick_time = 20 seconds;
1051     max_nick_changes = 5;
1052    
1053     /*
1054     * anti_spam_exit_message_time: the minimum time a user must be connected
1055     * before custom quit messages are allowed.
1056     */
1057     anti_spam_exit_message_time = 5 minutes;
1058    
1059     /*
1060     * ts delta: the time delta allowed between server clocks before
1061     * a warning is given, or before the link is dropped. all servers
1062     * should run ntpdate/rdate to keep clocks in sync
1063     */
1064     ts_warn_delta = 30 seconds;
1065     ts_max_delta = 5 minutes;
1066    
1067     /*
1068     * kline_with_reason: show the user the reason why they are k/d/glined
1069     * on exit. May give away who set k/dline when set via tcm.
1070     */
1071     kline_with_reason = yes;
1072    
1073     /*
1074     * kline_reason: show this message to users on channel
1075     * instead of the oper reason.
1076     */
1077     kline_reason = "Connection closed";
1078    
1079 michael 583 /*
1080     * reject_hold_time: wait this amount of time before disconnecting
1081     * a rejected client. Use 0 to disable.
1082     */
1083     reject_hold_time = 30 seconds;
1084 adx 30
1085     /*
1086     * warn_no_nline: warn opers about servers that try to connect but
1087     * we don't have a connect {} block for. Twits with misconfigured
1088     * servers can get really annoying with this enabled.
1089     */
1090     warn_no_nline = yes;
1091    
1092 michael 584 /*
1093     * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1094     * operators and administrators. Doing so is a good idea in case
1095     * there are any exempted (exempt{}) server IPs you don't want to
1096     * see leaked.
1097     */
1098     stats_e_disabled = no;
1099    
1100 adx 30 /* stats_o_oper only: make stats o (opers) oper only */
1101     stats_o_oper_only = yes;
1102    
1103     /* stats_P_oper_only: make stats P (ports) oper only */
1104     stats_P_oper_only = yes;
1105    
1106     /*
1107     * stats i oper only: make stats i (auth {}) oper only. set to:
1108     * yes: show users no auth blocks, made oper only.
1109     * masked: show users first matching auth block
1110     * no: show users all auth blocks.
1111     */
1112     stats_i_oper_only = yes;
1113    
1114     /*
1115     * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1116     * yes: show users no auth blocks, made oper only
1117     * masked: show users first matching auth block
1118     * no: show users all auth blocks.
1119     */
1120     stats_k_oper_only = yes;
1121 michael 583
1122 adx 30 /*
1123     * caller_id_wait: time between notifying a +g user that somebody
1124     * is messaging them.
1125     */
1126     caller_id_wait = 1 minute;
1127    
1128     /*
1129 michael 56 * opers_bypass_callerid: allows operators to bypass +g and message
1130     * anyone who has it set (useful if you use services).
1131     */
1132     opers_bypass_callerid = no;
1133    
1134     /*
1135 adx 30 * pace_wait_simple: time between use of less intensive commands
1136 adx 269 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1137 adx 30 */
1138     pace_wait_simple = 1 second;
1139    
1140     /*
1141     * pace_wait: time between more intensive commands
1142 adx 269 * (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1143 adx 30 */
1144     pace_wait = 10 seconds;
1145    
1146     /*
1147     * short_motd: send clients a notice telling them to read the motd
1148     * instead of forcing a motd to clients who may simply ignore it.
1149     */
1150     short_motd = no;
1151    
1152     /*
1153     * ping_cookie: require clients to respond exactly to a ping command,
1154     * can help block certain types of drones and FTP PASV mode spoofing.
1155     */
1156     ping_cookie = no;
1157    
1158     /* no_oper_flood: increase flood limits for opers. */
1159     no_oper_flood = yes;
1160    
1161     /*
1162     * true_no_oper_flood: completely eliminate flood limits for opers
1163     * and for clients with can_flood = yes in their auth {} blocks
1164     */
1165     true_no_oper_flood = yes;
1166    
1167     /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1168     oper_pass_resv = yes;
1169    
1170     /*
1171     * idletime: the maximum amount of time a user may idle before
1172     * they are disconnected
1173     */
1174     idletime = 0;
1175    
1176     /* REMOVE ME. The following line checks you've been reading. */
1177     havent_read_conf = 1;
1178    
1179     /*
1180     * max_targets: the maximum amount of targets in a single
1181     * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1182     */
1183     max_targets = 4;
1184    
1185     /*
1186     * client_flood: maximum amount of data in a clients queue before
1187     * they are dropped for flooding.
1188     */
1189     client_flood = 2560 bytes;
1190    
1191     /*
1192     * message_locale: the default message locale
1193     * Use "standard" for the compiled in defaults.
1194     * To install the translated messages, go into messages/ in the
1195     * source directory and run `make install'.
1196     */
1197     message_locale = "standard";
1198    
1199     /*
1200     * usermodes configurable: a list of usermodes for the options below
1201     *
1202     * +b - bots - See bot and drone flooding notices
1203     * +c - cconn - Client connection/quit notices
1204 db 853 * +C - cconn - Client connection/quit notices full
1205 adx 30 * +D - deaf - Don't receive channel messages
1206     * +d - debug - See debugging notices
1207     * +f - full - See I: line full notices
1208     * +G - softcallerid - Server Side Ignore for users not on your channels
1209     * +g - callerid - Server Side Ignore (for privmsgs etc)
1210     * +i - invisible - Not shown in NAMES or WHO unless you share a
1211     * a channel
1212     * +k - skill - See server generated KILL messages
1213     * +l - locops - See LOCOPS messages
1214     * +n - nchange - See client nick changes
1215     * +r - rej - See rejected client notices
1216     * +s - servnotice - See general server notices
1217     * +u - unauth - See unauthorized client notices
1218     * +w - wallop - See server generated WALLOPS
1219     * +x - external - See remote server connection and split notices
1220     * +y - spy - See LINKS, STATS, TRACE notices etc.
1221     * +z - operwall - See oper generated WALLOPS
1222     */
1223 michael 583
1224 adx 30 /* oper_only_umodes: usermodes only opers may set */
1225 db 853 oper_only_umodes = bots, cconn, cconn_full, debug, full, skill,
1226     nchange, rej, spy, external, operwall,
1227     locops, unauth;
1228 adx 30
1229     /* oper_umodes: default usermodes opers get when they /oper */
1230 adx 264 oper_umodes = bots, locops, servnotice, operwall, wallop;
1231 adx 30
1232     /*
1233     * servlink_path: path to 'servlink' program used by ircd to handle
1234     * encrypted/compressed server <-> server links.
1235     *
1236     * only define if servlink is not in same directory as ircd itself.
1237     */
1238     #servlink_path = "/usr/local/ircd/bin/servlink";
1239    
1240     /*
1241     * default_cipher_preference: default cipher to use for cryptlink when none is
1242     * specified in connect block.
1243     */
1244     #default_cipher_preference = "BF/168";
1245    
1246     /*
1247     * use_egd: if your system does not have *random devices yet you
1248     * want to use OpenSSL and encrypted links, enable this. Beware -
1249     * EGD is *very* CPU intensive when gathering data for its pool
1250     */
1251     # use_egd = yes;
1252    
1253     /*
1254     * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1255     * which automatically finds the path.
1256     */
1257     # egdpool_path = "/var/run/egd-pool";
1258    
1259    
1260     /*
1261     * compression_level: level of compression for compressed links between
1262     * servers.
1263     *
1264     * values are between: 1 (least compression, fastest)
1265     * and: 9 (most compression, slowest).
1266     */
1267     # compression_level = 6;
1268    
1269     /*
1270     * throttle_time: the minimum amount of time between connections from
1271     * the same ip. exempt {} blocks are excluded from this throttling.
1272     * Offers protection against flooders who reconnect quickly.
1273     * Set to 0 to disable.
1274     */
1275     throttle_time = 0;
1276     };
1277    
1278     glines {
1279     /*
1280     * EFnet Note: This feature is required for European EFnet servers
1281     * and is used by several North American servers. As
1282     * such, it has been left on by default. If you
1283     * do not want your server to participate in G:Lines
1284     * you should disable this.
1285     */
1286    
1287     /* enable: enable glines, network wide temp klines */
1288     enable = yes;
1289    
1290 michael 583 /*
1291     * duration: the amount of time a gline will remain on your
1292     * server before expiring
1293     */
1294 adx 30 duration = 1 day;
1295    
1296 michael 583 /*
1297     * logging: which types of rules you want to log when triggered
1298     * (choose reject or block)
1299     */
1300 adx 30 logging = reject, block;
1301    
1302     /*
1303 michael 583 * NOTE: gline ACLs can cause a desync of glines throughout the
1304     * network, meaning some servers may have a gline triggered, and
1305     * others may not. Also, you only need insert rules for glines
1306     * that you want to block and/or reject. If you want to accept and
1307     * propagate the gline, do NOT put a rule for it.
1308 adx 30 */
1309    
1310     /* user@host for rule to apply to */
1311     user = "god@I.still.hate.packets";
1312     /* server for rule to apply to */
1313     name = "hades.arpa";
1314    
1315     /*
1316     * action: action to take when a matching gline is found. options are:
1317     * reject - do not apply the gline locally
1318     * block - do not propagate the gline
1319     */
1320     action = reject, block;
1321    
1322     user = "god@*";
1323     name = "*";
1324     action = block;
1325     };
1326    
1327     modules {
1328     /*
1329     * module path: other paths to search for modules specified below
1330     * and in /modload.
1331     */
1332     path = "/usr/local/ircd/modules";
1333     path = "/usr/local/ircd/modules/autoload";
1334    
1335     /* module: the name of a module to load on startup/rehash */
1336     #module = "some_module.so";
1337     };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28