/[svn]/ircd-hybrid-7.2/etc/example.efnet.conf.in
ViewVC logotype

Annotation of /ircd-hybrid-7.2/etc/example.efnet.conf.in

Parent Directory Parent Directory | Revision Log Revision Log


Revision 33 - (hide annotations)
Sun Oct 2 20:50:00 2005 UTC (14 years, 9 months ago) by knight
Original Path: ircd-hybrid/etc/example.efnet.conf
File size: 35605 byte(s)
- svn:keywords

1 adx 30 /* doc/example.efnet.conf - ircd-hybrid-7 EFnet Example configuration file
2     * Copyright (C) 2000-2005 Hybrid Development Team
3     *
4     * Written by ejb, wcampbel, db, leeh and others
5     * Other example configurations can be found in the source dir under
6     * etc/.
7     *
8 knight 31 * $Id$
9 adx 30 */
10    
11     /* IMPORTANT NOTES:
12     *
13     * auth {} blocks MUST be specified in order of precedence. The first one
14     * that matches a user will be used. So place spoofs first, then specials,
15     * then general access.
16     *
17     * Shell style (#), C++ style (//) and C style comments are supported.
18     *
19     * Files may be included by either:
20     * .include "filename"
21     * .include <filename>
22     *
23     * Times/durations are written as:
24     * 12 hours 30 minutes 1 second
25     *
26     * Valid units of time:
27     * month, week, day, hour, minute, second
28     *
29     * Valid units of size:
30     * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31     *
32     * Sizes and times may be singular or plural.
33     */
34    
35     /* EFNET NOTE:
36     *
37     * This configuration file is a BASIC configuration file for use
38     * on EFnet. You MUST still take the time to set this file up
39     * properly.
40     *
41     * DISCLAIMER: This file was submitted by Disciple@EFnet and has
42     * since been modified by the Hybrid team.
43     */
44    
45     /* serverinfo {}: Contains information about the server. (OLD M:) */
46     serverinfo {
47     /* name: the name of our server */
48     name = "efnet.irc";
49    
50     /*
51     * A server's unique ID. This is three characters long and must be in
52     * the form [0-9][A-Z0-9][A-Z0-9]. The first character must be a
53     * digit, followed by 2 alpha-numerical letters.
54     * Note: The letters must be capitalized.
55     */
56     sid = "_CHANGE_ME_";
57    
58     /*
59     * description: the description of the server. '[' and ']' may not
60     * be used here for compatibility with older servers.
61     */
62     description = "hybrid-7 test server";
63    
64     /*
65     * network info: the name and description of the network this server
66     * is on. Shown in the 005 reply and used with serverhiding.
67     */
68     network_name = "EFnet";
69     network_desc = "Eris Free Network";
70    
71     /*
72     * hub: allow this server to act as a hub and have multiple servers
73     * connected to it. This may not be changed if there are active
74     * LazyLink servers.
75     */
76     hub = no;
77    
78     /*
79     * vhost: the IP to bind to when we connect outward to ipv4 servers.
80     * This should be an ipv4 IP only, or "* for INADDR_ANY.
81     */
82     #vhost = "192.169.0.1";
83    
84     /*
85     * vhost6: the IP to bind to when we connect outward to ipv6 servers.
86     * This should be an ipv6 IP only, or "* for INADDR_ANY.
87     */
88     #vhost6 = "3ffe:80e8:546::2";
89    
90     /* max_clients: the maximum number of clients allowed to connect */
91     max_clients = 512;
92    
93     /*
94     * rsa key: the path to the file containing our rsa key for cryptlink.
95     *
96     * Example command to store a 2048 bit RSA keypair in
97     * rsa.key, and the public key in rsa.pub:
98     *
99     * openssl genrsa -out rsa.key 2048
100     * openssl rsa -in rsa.key -pubout -out rsa.pub
101     * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
102     * chmod 0600 rsa.key
103     * chmod 0644 rsa.pub
104     */
105     #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
106     };
107    
108     /* admin {}: contains admin information about the server. (OLD A:) */
109     admin {
110     name = "EFnet Admin";
111     description = "Main Server Administrator";
112     email = "<irc-admin@efnet.irc>";
113     };
114    
115     /* logging {}: contains information about logfiles. */
116     logging {
117     /* Do you want to enable logging to ircd.log? */
118     use_logging = yes;
119    
120     /*
121     * logfiles: the logfiles to use for user connects, /oper uses,
122     * and failed /oper. These files must exist for logging to be used.
123     */
124     fuserlog = "logs/userlog";
125     foperlog = "logs/operlog";
126     ffailed_operlog = "logs/foperlog";
127    
128     /*
129     * log level: the amount of detail to log in ircd.log. The
130     * higher, the more information is logged. May be changed
131     * once the server is running via /quote SET LOG. Either:
132     * L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
133     */
134     log_level = L_INFO;
135     };
136    
137     /* class {}: contain information about classes for users (OLD Y:) */
138     class {
139     /* name: the name of the class. classes are text now */
140     name = "users";
141    
142     /*
143     * ping_time: how often a client must reply to a PING from the
144     * server before they are dropped.
145     */
146     ping_time = 90 seconds;
147    
148     /* how many local users are allowed to connect from one IP */
149     number_per_ip = 2;
150    
151     /* how many local users are allowed to connect from one ident@host */
152     max_local = 2;
153    
154     /* network-wide limit of users per ident@host */
155     max_global = 10;
156    
157     /* max_number: the maximum number of users allowed in this class */
158     max_number = 100;
159    
160     /*
161     * sendq: the amount of data allowed in a clients queue before
162     * they are dropped.
163     */
164     sendq = 100 kbytes;
165     };
166    
167     class {
168     name = "opers";
169    
170     /*
171     * contrary to seeming popular belief, setting ping time
172     * higher for an oper is NOT doing them a favor.
173     * Since if a link is dead its dead and it means
174     * you have to use another nick long enough to kill the old one :-)
175     * Its much better to use a fairly standard 90 second ping time
176     */
177     ping_time = 90 seconds;
178     number_per_ip = 10;
179     max_number = 100;
180     sendq = 1 mbyte;
181     };
182    
183     class {
184     name = "server";
185    
186     /*
187     * Same thing here. Its a fallacy to think increasing
188     * ping time for servers is a "good idea." All it leads to
189     * is "ghosting" on one end. Not a good idea.
190     */
191     ping_time = 90 seconds;
192    
193     /*
194     * ping_warning: how fast a server must reply to a PING before
195     * a warning to opers is generated.
196     */
197     ping_warning = 5 seconds;
198    
199     /*
200     * connectfreq: only used in server classes. Specifies the delay
201     * between autoconnecting to servers.
202     *
203     * Both comstud and I recommend 10 minutes a few years ago.
204     * 15 minutes might be right now. The reason you don't want it too
205     * low is, you make the servers reconnect too quickly with
206     * a large sendq, and they _will_ nick collide. badly. 5 minutes
207     * IS way too short.
208     */
209     connectfreq = 15 minutes;
210    
211     /* max number: the amount of servers to autoconnect to */
212     max_number = 1;
213    
214     /* sendq: On big nets this needs to be a reasonably large value */
215     sendq = 15 megabytes;
216     };
217    
218     /* listen {}: contain information about the ports ircd listens on (OLD P:) */
219     listen {
220     /*
221     * port: the specific port to listen on. If no host is specified
222     * before, it will listen on all available IPs.
223     *
224     * Ports are separated via a comma, a range may be specified using ".."
225     */
226    
227     /* port: listen on all available IPs, ports 6665 to 6669 */
228     port = 6665 .. 6669;
229    
230     /*
231     * Listen on 192.168.0.1/7023 and hidden from STATS P
232     * unless you are an administrator.
233     *
234     * NOTE: The "flags" directive has to come before "port". Always!
235     */
236     flags = hidden;
237     host = "192.168.0.1";
238     port = 7023;
239    
240     /*
241     * host: set a specific IP/host the ports after the line will listen
242     * on. This may be ipv4 or ipv6.
243     */
244     host = "1.2.3.4";
245     port = 7000, 7001;
246    
247     host = "3ffe:1234:a:b:c::d";
248     port = 7002;
249     };
250    
251     /* auth {}: allow users to connect to the ircd (OLD I:) */
252     auth {
253     /*
254     * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
255     * lines are permitted per auth block.
256     */
257     user = "*@172.16.0.0/12";
258     user = "*test@123D:B567:*";
259    
260     /* password: an optional password that is required to use this block */
261     password = "letmein";
262    
263     /*
264     * encrypted: controls whether the auth password above has been
265     * encrypted.
266     */
267     encrypted = yes;
268    
269     /*
270     * spoof: fake the users host to this. This is free-form,
271     * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
272     */
273     spoof = "I.still.hate.packets";
274    
275     /* class: the class the user is placed in */
276     class = "opers";
277    
278     /*
279     * need_password: don't allow users who haven't supplied the correct
280     * password to connect using another auth{} block
281     * ('&' prefix on /stats I if disabled)
282     * need_ident: require the user to have identd to connect ('+' prefix on /stats I)
283     * spoof_notice: enable spoofing notification to admins
284     * exceed_limit: allow a user to exceed class limits ('>' prefix on /stats I)
285     * kline_exempt: exempt this user from k/glines ('^' prefix on /stats I)
286     * gline_exempt: exempt this user from glines ('_' prefix on /stats I)
287     * resv_exempt: exempt this user from resvs ('$' prefix on /stats I)
288     * no_tilde: remove ~ from a user with no ident ('-' prefix on /stats I)
289     * can_flood: allow this user to exceed flood limits ('|' prefix on /stats I)
290     * can_idle: exempt this use from idle restrictions ('<' prefix on /stats I)
291     */
292     flags = need_password, spoof_notice, exceed_limit, kline_exempt,
293     gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
294     };
295    
296     auth {
297     /*
298     * redirect: the server and port to redirect a user to. A user does
299     * not have to obey the redirection, the ircd just suggests an alternative
300     * server for them.
301     */
302     redirserv = "irc.fi";
303     redirport = 6667;
304    
305     user = "*.fi";
306    
307     /* class: a class is required even though it is not used */
308     class = "users";
309     };
310    
311     auth {
312     user = "*@*";
313     class = "users";
314     flags = need_ident;
315     };
316    
317     /* operator {}: defines ircd operators. (OLD O:)
318     * ircd-hybrid no longer supports local operators, privileges are
319     * controlled via flags.
320     */
321     operator {
322     /* name: the name of the oper */
323     /* Note: operator "opername"{} is also supported */
324     name = "god";
325    
326     /*
327     * user: the user@host required for this operator. CIDR is not
328     * supported. Multiple user="" lines are supported.
329     */
330     user = "*god@*";
331     user = "*@127.0.0.1";
332    
333     /*
334     * password: the password required to oper. By default this will
335     * need to be encrypted using 'mkpasswd'. MD5 is supported.
336     */
337     password = "etcnjl8juSU1E";
338    
339     /*
340     * encrypted: controls whether the oper password above has been
341     * encrypted. (OLD CRYPT_OPER_PASSWORD now optional per operator)
342     */
343     encrypted = yes;
344    
345     /*
346     * rsa_public_key_file: the public key for this oper when using Challenge.
347     * A password should not be defined when this is used, see
348     * doc/challenge.txt for more information.
349     */
350     # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
351    
352     /* class: the class the oper joins when they successfully /oper */
353     class = "opers";
354    
355     /*
356     * privileges: controls the activities and commands an oper is
357     * allowed to do on the server. All options default to no.
358     * Available options:
359     *
360     * global_kill: allows remote users to be /KILL'd (OLD 'O' flag)
361     * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
362     * remoteban: allows remote KLINE/UNKLINE
363     * kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
364     * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
365     * gline: allows GLINE (OLD 'G' flag)
366     * xline: allows XLINE (OLD 'X' flag)
367     * operwall: allows OPERWALL
368     * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
369     * via usermode +n
370     * rehash: allows oper to REHASH config (OLD 'H' flag)
371     * die: allows DIE and RESTART (OLD 'D' flag)
372     * admin: gives admin privileges. admins
373     * may (un)load modules and see the
374     * real IPs of servers.
375     * hidden_admin: same as 'admin', but noone can recognize you as
376     * being an admin
377     * hidden_oper: not shown in /stats p (except for other operators)
378     */
379     /* You can either use
380     * die = yes;
381     * rehash = yes;
382     *
383     * or in a flags statement i.e.
384     * flags = die, rehash;
385     *
386     * You can also negate a flag with ~ i.e.
387     * flags = ~remote;
388     *
389     */
390     flags = global_kill, remote, kline, unkline, xline,
391     die, rehash, nick_changes, admin, operwall;
392     };
393    
394     /* connect {}: controls servers we connect to (OLD C:, N:, H:, L:) */
395     connect {
396     /* name: the name of the server */
397     name = "irc.uplink.com";
398    
399     /*
400     * host: the host or IP to connect to. If a hostname is used it
401     * must match the reverse dns of the server.
402     */
403     host = "192.168.0.1";
404    
405     /*
406     * passwords: the passwords we send (OLD C:) and accept (OLD N:).
407     * The remote server will have these passwords reversed.
408     */
409     send_password = "password";
410     accept_password = "anotherpassword";
411    
412     /*
413     * encrypted: controls whether the accept_password above has been
414     * encrypted. (OLD CRYPT_LINK_PASSWORD now optional per connect)
415     */
416     encrypted = no;
417    
418     /* port: the port to connect to this server on */
419     port = 6666;
420    
421     /*
422     * hub_mask: the mask of servers that this server may hub. Multiple
423     * entries are permitted
424     */
425     hub_mask = "*";
426    
427     /*
428     * leaf_mask: the mask of servers this server may not hub. Multiple
429     * entries are permitted. Useful for forbidding EU -> US -> EU routes.
430     */
431     # leaf_mask = "*.uk";
432    
433     /* masking: the servername we pretend to be when we connect */
434     # fakename = "*.arpa";
435    
436     /* class: the class this server is in */
437     class = "server";
438    
439     /*
440     * autoconnect: controls whether we autoconnect to this server or not,
441     * dependent on class limits. By default, this is disabled.
442     * compressed: controls whether traffic is compressed via ziplinks.
443     * By default, this is disabled
444     * lazylink: controls whether this server is a LazyLink. LazyLink
445     * servers may NOT hub. See doc/LazyLinks.txt
446     *
447     * EFnet Note: With this enabled, you download a connect burst
448     * as it is needed, instead of all at once. This
449     * could allow servers on much smaller lines (T1s)
450     * to link a server. It also could allow a server
451     * on a DoS'ed link to stay connected.
452     * This makes client servers
453     * cheaper to run. EFnet needs more client servers.
454     *
455     * cryptlink: enable full encryption for all data passing between our
456     * server and this link and rsa authentication.
457     * burst_away: This will send the /away string that users have set
458     * on the server burst. Note this can be a lot of data
459     * and slow down your server burst.
460     */
461     # flags = autoconn, lazylink, compressed, cryptlink, burst_away;
462     };
463    
464     connect {
465     name = "encrypted.auth.example";
466     host = "some.host.somewhere";
467     port = 6667;
468    
469     flags = cryptlink;
470    
471     /*
472     * rsa_public_key_file: the path to the public keyfile of the server.
473     * Used instead of passwords.
474     */
475     rsa_public_key_file = "etc/remote.server.keyfile";
476    
477     /*
478     * cipher preference: set the preferred cipher for this link
479     *
480     * Available ciphers are:
481     * BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
482     * RC5.12/128 RC5.8/128 3DES/168 DES/56
483     *
484     * NOTE: Some ciphers may not be supported by your OpenSSL.
485     * Check the output from 'configure' for available ciphers.
486     *
487     * NOTE2: To help you decide what cipher to use, tools/encspeed
488     * will show you approximately how fast each cipher is.
489     * However, blowfish is fast and secure, and is probably
490     * a good default for most situations.
491     *
492     * NOTE3: Default if none is set is BF/128
493     *
494     * The cipher *MUST* be the same in both directions. If you
495     * set a cipher preference, your uplink must set the same cipher,
496     * else it will not link.
497     */
498     # cipher_preference = "BF/168";
499     };
500    
501     /*
502     * Note: Don't add an extra 'name=' entry if you use
503     * the connect "name"{} feature
504     */
505     connect "ipv6.some.server" {
506     host = "3ffd:dead:beef::1";
507     send_password = "password";
508     accept_password = "password";
509     port = 6666;
510    
511     /*
512     * aftype: controls whether the connection uses "ipv4" or "ipv6".
513     * Default is ipv4.
514     */
515     aftype = ipv6;
516     class = "server";
517     };
518    
519     /* cluster{}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
520     * automatically (OLD hyb6 SLAVE_SERVERS)
521     */
522     cluster {
523     /* name: the server to share with, this can take wildcards */
524     /* NOTE: only local actions will be clustered, meaning if
525     * the server receives a shared kline/unkline/etc, it
526     * will not be propagated to clustered servers.
527     *
528     * Remote servers are not necessarily required to accept
529     * clustered lines, they need a shared{} for *THIS* server
530     * in order to accept them.
531     */
532     name = "*.arpa";
533    
534     /*
535     * type: list of what to share, options are as follows:
536     * kline - share klines
537     * tkline - share temporary klines
538     * unkline - share unklines
539     * xline - share xlines
540     * txline - share temporary xlines
541     * unxline - share unxlines
542     * resv - share resvs
543     * tresv - share temporary resvs
544     * unresv - share unresvs
545     * locops - share locops
546     * all - share all of the above (default)
547     */
548     type = kline, unkline, locops, xline, resv;
549     };
550    
551     /* shared {}: users that are allowed to remote kline (OLD U:)
552     *
553     * EFnet Note: This can be effectively used for remote klines.
554     * Please note that there is no password authentication
555     * for users setting remote klines. You must also be
556     * /oper'd in order to issue a remote kline.
557     */
558     shared {
559     /*
560     * name: the server the user must be on to set klines. If this is not
561     * specified, the user will be allowed to kline from all servers.
562     */
563     name = "irc2.some.server";
564    
565     /*
566     * user: the user@host mask that is allowed to set klines. If this is
567     * not specified, all users on the server above will be allowed to set
568     * a remote kline.
569     */
570     user = "oper@my.host.is.spoofed";
571    
572     /*
573     * type: list of what to share, options are as follows:
574     * kline - allow oper/server to kline
575     * tkline - allow temporary klines
576     * unkline - allow oper/server to unkline
577     * xline - allow oper/server to xline
578     * txline - allow temporary xlines
579     * unxline - allow oper/server to unxline
580     * resv - allow oper/server to resv
581     * tresv - allow temporary resvs
582     * unresv - allow oper/server to unresv
583     * locops - allow oper/server to locops - only used for servers that cluster
584     * all - allow oper/server to do all of the above (default)
585     */
586     type = kline, unkline, resv;
587     };
588    
589     /* kill {}: users that are not allowed to connect (OLD K:)
590     * Oper issued klines will be added to the specified kline config
591     */
592     kill {
593     user = "bad@*.hacked.edu";
594     reason = "Obviously hacked account";
595     };
596    
597     kill {
598     user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.org$";
599     type = regex;
600     };
601    
602     /* deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
603     * Oper issued dlines will be added to the specified dline config
604     */
605     deny {
606     ip = "10.0.1.0/24";
607     reason = "Reconnecting vhosted bots";
608     };
609    
610     /* exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:)
611     *
612     * EFnet Note: exempt {} blocks are NOT hidden, so do NOT exempt
613     * EFnet server IP's.
614     */
615     exempt {
616     ip = "192.168.0.0/16";
617     };
618    
619     /* resv {}: nicks and channels users may not use/join (OLD Q:) */
620     resv {
621     /* reason: the reason for the proceeding resv's */
622     reason = "There are no services on this network";
623    
624     /* resv: the nicks and channels users may not join/use */
625     nick = "nickserv";
626     nick = "chanserv";
627     nick = "operserv";
628    
629     nick = "JUPES";
630     nick = "JUPE";
631     nick = "CH?NF?X"; # CHANFIX (services.int)
632    
633     /* These are totally optional, but may be a good idea */
634     nick = "oper";
635     nick = "ircop";
636     nick = "op";
637     nick = "ident";
638     nick = "pass";
639     channel = "#jupedchan";
640    
641     /* resv: wildcard masks are also supported in nicks only */
642     reason = "Clone bots";
643     nick = "clone*";
644     };
645    
646     /* gecos {}: The X: replacement, used for banning users based on their
647     * "realname".
648     */
649     gecos {
650     name = "*sex*";
651     reason = "Possible spambot";
652     };
653    
654     gecos {
655     name = "sub7server";
656     reason = "Trojan drone";
657     };
658    
659     gecos {
660     name = "*http*";
661     reason = "Spambot";
662     };
663    
664     gecos {
665     name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
666     type = regex;
667     };
668    
669     /*
670     * channel {}
671     *
672     * The channel block contains options pertaining to channels
673     */
674     channel {
675     /* restrict_channels: reverse channel RESVs logic, only reserved
676     * channels are allowed */
677     restrict_channels = no;
678    
679     /*
680     * disable_local_channels: prevent users from joining &channels.
681     */
682     disable_local_channels = no;
683    
684     /*
685     * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
686     * that can join a +i channel without an invite.
687     */
688     use_invex = yes;
689    
690     /*
691     * use_except: Enable/disable channel mode +e, a n!u@h list of masks
692     * that can join a channel through a ban (+b).
693     */
694     use_except = yes;
695    
696     /*
697     * use_knock: Allows users to request an invite to a channel that
698     * is locked somehow (+ikl). If the channel is +p or you are banned
699     * the knock will not be sent.
700     *
701     * EFnet Note: This seems to be used mostly by European servers
702     * and not North American ones.
703     * Please feel free to disable this
704     * if you do not want to run channel knock.
705     * channel knock allows an user to "/quote knock #channel"
706     * to ask for an invite. It is typically used in eu-efnet
707     * to ask for an invite to #eu-opers.
708     * An user who is banned will not have their knock
709     * sent to channel. It is paced, so knock will not
710     * cause a flood.
711     */
712     use_knock = yes;
713    
714     /*
715     * knock_delay: The amount of time a user must wait between issuing
716     * the knock command.
717     */
718     knock_delay = 1 minutes;
719    
720     /*
721     * knock_delay_channel: How often a knock to any specific channel
722     * is permitted, regardless of the user sending the knock.
723     */
724     knock_delay_channel = 1 minute;
725    
726     /*
727     * invite_ops_only: Restrict /invite to ops/halfops on channels,
728     * rather than allowing unopped users to invite people to a -i channel.
729     */
730     invite_ops_only = yes;
731    
732     /* max chans: The maximum number of channels a user can join/be on. */
733     max_chans_per_user = 25;
734    
735     /* quiet_on_ban: stop banned people talking in channels. */
736     quiet_on_ban = yes;
737    
738     /* max_bans: maximum number of +b/e/I modes in a channel */
739     max_bans = 100;
740    
741     /*
742     * splitcode: The ircd will now check splitmode every few seconds.
743     *
744     * Either split users or split servers can activate splitmode, but
745     * both conditions must be met for the ircd to deactivate splitmode.
746     *
747     * You may force splitmode to be permanent by /quote set splitmode on
748     */
749    
750     /*
751     * default_split_user_count: when the usercount is lower than this level,
752     * consider ourselves split. This must be set for automatic splitmode.
753     */
754     default_split_user_count = 40000;
755    
756     /*
757     * default_split_server_count: when the servercount is lower than this,
758     * consider ourselves split. This must be set for automatic splitmode.
759     */
760     default_split_server_count = 10;
761    
762     /* split no create: disallow users creating channels on split. */
763     no_create_on_split = yes;
764    
765     /* split: no join: disallow users joining channels at all on a split */
766     no_join_on_split = no;
767    
768     /* burst topicwho: enable sending of who set topic on topicburst */
769     /* default is yes */
770     burst_topicwho = yes;
771    
772     /* how many joins in how many seconds constitute a flood, use
773     * 0 to disable. +b opers will be notified (changeable via /set) */
774     join_flood_count = 16;
775     join_flood_time = 8 seconds;
776     };
777    
778     /*
779     * serverhide {}
780     *
781     * The serverhide block contains the options regarding serverhiding
782     */
783     serverhide {
784     /*
785     * flatten_links: this option will show all servers in /links appear
786     * that they are linked to this current server
787     *
788     * EFnet Note: While this is not a requirement on EFnet, it
789     * may be a good idea. Except, it's useless
790     * unless the entire net runs it.
791     */
792     flatten_links = yes;
793    
794     /*
795     * links_delay: how often to update the links file when it is
796     * flattened.
797     */
798     links_delay = 5 minutes;
799    
800     /*
801     * hidden: hide this server from a /links output on servers that
802     * support it. this allows hub servers to be hidden etc.
803     */
804     hidden = no;
805    
806     /*
807     * disable_hidden: prevent servers hiding themselves from a
808     * /links output.
809     */
810     disable_hidden = no;
811    
812     /*
813     * hide_servers: hide remote servernames everywhere and instead use
814     * hidden_name and network_desc.
815     */
816     hide_servers = no;
817    
818     /*
819     * Use this as the servername users see if hide_servers = yes.
820     */
821     hidden_name = "*.hidden.com";
822    
823     /*
824     * hide_server_ips: If this is disabled, opers will be unable to see servers
825     * ips and will be shown a masked ip, admins will be shown the real ip.
826     *
827     * If this is enabled, nobody can see a servers ip. *This is a kludge*, it
828     * has the side effect of hiding the ips everywhere, including logfiles.
829     *
830     * We recommend you leave this disabled, and just take care with who you
831     * give admin=yes; to.
832     */
833     hide_server_ips = yes;
834     };
835    
836     /*
837     * general {}
838     *
839     * The general block contains many of the options that were once compiled
840     * in options in config.h. The general block is read at start time.
841     */
842     general {
843     /*
844     * gline_min_cidr: the minimum required length of a CIDR bitmask
845     * for IPv4 based glines
846     */
847     gline_min_cidr = 16;
848    
849     /*
850     * gline_min_cidr6: the minimum required length of a CIDR bitmask
851     * for IPv6 based glines
852     */
853     gline_min_cidr6 = 48;
854    
855     /*
856     * Whether to automatically set mode +i on connecting users.
857     */
858     invisible_on_connect = yes;
859    
860     /*
861     * If you don't explicitly specify burst_away in your connect blocks, then
862     * they will default to the burst_away value below.
863     */
864     burst_away = no;
865    
866     /*
867     * Show "actually using host <ip>" on /whois when possible.
868     */
869     use_whois_actually = yes;
870    
871     /*
872     * Max time from the nickname change that still causes KILL
873     * automatically to switch for the current nick of that user. (seconds)
874     */
875     kill_chase_time_limit = 90;
876    
877     /*
878     * If hide_spoof_ips is disabled, opers will be allowed to see the real IP of spoofed
879     * users in /trace etc. If this is defined they will be shown a masked IP.
880     */
881     hide_spoof_ips = yes;
882    
883     /*
884     * Ignore bogus timestamps from other servers. Yes, this will desync
885     * the network, but it will allow chanops to resync with a valid non TS 0
886     *
887     * This should be enabled network wide, or not at all.
888     */
889     ignore_bogus_ts = no;
890    
891     /*
892     * disable_auth: completely disable ident lookups; if you enable this,
893     * be careful of what you set need_ident to in your auth {} blocks
894     */
895     disable_auth = no;
896    
897     /* disable_remote_commands: disable users doing commands on remote servers */
898     disable_remote_commands = no;
899    
900     /*
901     * Disable temporary kline/xline expire notices yes/no
902     */
903     tkline_expire_notices = no;
904    
905     /*
906     * default_floodcount: the default value of floodcount that is configurable
907     * via /quote set floodcount. This is the amount of lines a user
908     * may send to any other user/channel in one second.
909     */
910     default_floodcount = 10;
911    
912     /*
913     * failed_oper_notice: send a notice to all opers on the server when
914     * someone tries to OPER and uses the wrong password, host or ident.
915     */
916     failed_oper_notice = yes;
917    
918     /*
919     * dots_in_ident: the amount of '.' characters permitted in an ident
920     * reply before the user is rejected.
921     */
922     dots_in_ident = 0;
923    
924     /*
925     * dot_in_ip6_addr: ircd-hybrid-6.0 and earlier will disallow hosts
926     * without a '.' in them. this will add one to the end. only needed
927     * for older servers.
928     */
929     dot_in_ip6_addr = no;
930    
931     /*
932     * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
933     * placed via the server. klines hand placed are exempt from limits.
934     * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
935     */
936     min_nonwildcard = 3;
937    
938     /*
939     * min_nonwildcard_simple: the minimum non wildcard characters in
940     * gecos bans. wildcard chars: '*' '?' '#'
941     */
942     min_nonwildcard_simple = 3;
943    
944     /* max_accept: maximum allowed /accept's for +g usermode */
945     max_accept = 20;
946    
947     /* anti_nick_flood: enable the nickflood control code */
948     anti_nick_flood = yes;
949    
950     /* nick flood: the nick changes allowed in the specified period */
951     max_nick_time = 20 seconds;
952     max_nick_changes = 5;
953    
954     /*
955     * anti_spam_exit_message_time: the minimum time a user must be connected
956     * before custom quit messages are allowed.
957     */
958     anti_spam_exit_message_time = 5 minutes;
959    
960     /*
961     * ts delta: the time delta allowed between server clocks before
962     * a warning is given, or before the link is dropped. all servers
963     * should run ntpdate/rdate to keep clocks in sync
964     */
965     ts_warn_delta = 30 seconds;
966     ts_max_delta = 5 minutes;
967    
968     /*
969     * kline_with_reason: show the user the reason why they are k/d/glined
970     * on exit. May give away who set k/dline when set via tcm.
971     */
972     kline_with_reason = yes;
973    
974     /*
975     * kline_reason: show this message to users on channel
976     * instead of the oper reason.
977     */
978     kline_reason = "Connection closed";
979    
980     /*
981     * reject_hold_time: wait this amount of time before disconnecting
982     * a rejected client. Use 0 to disable.
983     */
984     reject_hold_time = 30 seconds;
985    
986     /*
987     * warn_no_nline: warn opers about servers that try to connect but
988     * we don't have a connect {} block for. Twits with misconfigured
989     * servers can get really annoying with this enabled.
990     */
991     warn_no_nline = yes;
992    
993     /* stats_o_oper only: make stats o (opers) oper only */
994     stats_o_oper_only = yes;
995    
996     /* stats_P_oper_only: make stats P (ports) oper only */
997     stats_P_oper_only = yes;
998    
999     /*
1000     * stats i oper only: make stats i (auth {}) oper only. set to:
1001     * yes: show users no auth blocks, made oper only.
1002     * masked: show users first matching auth block
1003     * no: show users all auth blocks.
1004     */
1005     stats_i_oper_only = yes;
1006    
1007     /*
1008     * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1009     * yes: show users no auth blocks, made oper only
1010     * masked: show users first matching auth block
1011     * no: show users all auth blocks.
1012     */
1013     stats_k_oper_only = yes;
1014    
1015     /*
1016     * caller_id_wait: time between notifying a +g user that somebody
1017     * is messaging them.
1018     */
1019     caller_id_wait = 1 minute;
1020    
1021     /*
1022     * pace_wait_simple: time between use of less intensive commands
1023     * (HELP, remote WHOIS, WHOWAS)
1024     */
1025     pace_wait_simple = 1 second;
1026    
1027     /*
1028     * pace_wait: time between more intensive commands
1029     * (ADMIN, INFO, LIST, LUSERS, MOTD, STATS, VERSION)
1030     */
1031     pace_wait = 10 seconds;
1032    
1033     /*
1034     * short_motd: send clients a notice telling them to read the motd
1035     * instead of forcing a motd to clients who may simply ignore it.
1036     */
1037     short_motd = no;
1038    
1039     /*
1040     * ping_cookie: require clients to respond exactly to a ping command,
1041     * can help block certain types of drones and FTP PASV mode spoofing.
1042     */
1043     ping_cookie = no;
1044    
1045     /* no_oper_flood: increase flood limits for opers. */
1046     no_oper_flood = yes;
1047    
1048     /*
1049     * true_no_oper_flood: completely eliminate flood limits for opers
1050     * and for clients with can_flood = yes in their auth {} blocks
1051     */
1052     true_no_oper_flood = yes;
1053    
1054     /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1055     oper_pass_resv = yes;
1056    
1057     /*
1058     * idletime: the maximum amount of time a user may idle before
1059     * they are disconnected
1060     */
1061     idletime = 0;
1062    
1063     /* REMOVE ME. The following line checks you've been reading. */
1064     havent_read_conf = 1;
1065    
1066     /*
1067     * max_targets: the maximum amount of targets in a single
1068     * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1069     */
1070     max_targets = 4;
1071    
1072     /*
1073     * client_flood: maximum amount of data in a clients queue before
1074     * they are dropped for flooding.
1075     */
1076     client_flood = 2560 bytes;
1077    
1078     /*
1079     * message_locale: the default message locale
1080     * Use "standard" for the compiled in defaults.
1081     * To install the translated messages, go into messages/ in the
1082     * source directory and run `make install'.
1083     */
1084     message_locale = "standard";
1085    
1086     /*
1087     * usermodes configurable: a list of usermodes for the options below
1088     *
1089     * +b - bots - See bot and drone flooding notices
1090     * +c - cconn - Client connection/quit notices
1091     * +D - deaf - Don't receive channel messages
1092     * +d - debug - See debugging notices
1093     * +f - full - See I: line full notices
1094     * +G - softcallerid - Server Side Ignore for users not on your channels
1095     * +g - callerid - Server Side Ignore (for privmsgs etc)
1096     * +i - invisible - Not shown in NAMES or WHO unless you share a
1097     * a channel
1098     * +k - skill - See server generated KILL messages
1099     * +l - locops - See LOCOPS messages
1100     * +n - nchange - See client nick changes
1101     * +r - rej - See rejected client notices
1102     * +s - servnotice - See general server notices
1103     * +u - unauth - See unauthorized client notices
1104     * +w - wallop - See server generated WALLOPS
1105     * +x - external - See remote server connection and split notices
1106     * +y - spy - See LINKS, STATS, TRACE notices etc.
1107     * +z - operwall - See oper generated WALLOPS
1108     */
1109    
1110     /* oper_only_umodes: usermodes only opers may set */
1111     oper_only_umodes = bots, cconn, debug, full, skill, nchange,
1112     rej, spy, external, operwall, locops, unauth;
1113    
1114     /* oper_umodes: default usermodes opers get when they /oper */
1115     oper_umodes = locops, servnotice, operwall, wallop;
1116    
1117     /*
1118     * servlink_path: path to 'servlink' program used by ircd to handle
1119     * encrypted/compressed server <-> server links.
1120     *
1121     * only define if servlink is not in same directory as ircd itself.
1122     */
1123     #servlink_path = "/usr/local/ircd/bin/servlink";
1124    
1125     /*
1126     * default_cipher_preference: default cipher to use for cryptlink when none is
1127     * specified in connect block.
1128     */
1129     #default_cipher_preference = "BF/168";
1130    
1131     /*
1132     * use_egd: if your system does not have *random devices yet you
1133     * want to use OpenSSL and encrypted links, enable this. Beware -
1134     * EGD is *very* CPU intensive when gathering data for its pool
1135     */
1136     # use_egd = yes;
1137    
1138     /*
1139     * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1140     * which automatically finds the path.
1141     */
1142     # egdpool_path = "/var/run/egd-pool";
1143    
1144    
1145     /*
1146     * compression_level: level of compression for compressed links between
1147     * servers.
1148     *
1149     * values are between: 1 (least compression, fastest)
1150     * and: 9 (most compression, slowest).
1151     */
1152     # compression_level = 6;
1153    
1154     /*
1155     * throttle_time: the minimum amount of time between connections from
1156     * the same ip. exempt {} blocks are excluded from this throttling.
1157     * Offers protection against flooders who reconnect quickly.
1158     * Set to 0 to disable.
1159     *
1160     * EFnet Note: exempt {} blocks are NOT hidden, so do NOT exempt
1161     * EFnet server IP's.
1162     */
1163     throttle_time = 0;
1164     };
1165    
1166     glines {
1167     /*
1168     * EFnet Note: This feature is required for European EFnet servers
1169     * and is used by several North American servers. As
1170     * such, it has been left on by default. If you
1171     * do not want your server to participate in G:Lines
1172     * you should disable this.
1173     */
1174    
1175     /* enable: enable glines, network wide temp klines */
1176     enable = yes;
1177    
1178     /* duration: the amount of time a gline will remain on your server before expiring */
1179     duration = 1 day;
1180    
1181     /* logging: which types of rules you want to log when triggered (choose reject or block) */
1182     logging = reject, block;
1183    
1184     /*
1185     * NOTE: gline ACLs can cause a desync of glines throughout the network, meaning some servers
1186     * may have a gline triggered, and others may not. Also, you only need insert rules for glines
1187     * that you want to block and/or reject. If you want to accept and propagate the gline, do NOT
1188     * put a rule for it.
1189     */
1190    
1191     /* user@host for rule to apply to */
1192     user = "god@I.still.hate.packets";
1193     /* server for rule to apply to */
1194     name = "hades.arpa";
1195    
1196     /*
1197     * action: action to take when a matching gline is found. options are:
1198     * reject - do not apply the gline locally
1199     * block - do not propagate the gline
1200     */
1201     action = reject, block;
1202    
1203     user = "god@*";
1204     name = "*";
1205     action = block;
1206     };
1207    
1208     modules {
1209     /*
1210     * module path: other paths to search for modules specified below
1211     * and in /modload.
1212     */
1213     path = "/usr/local/ircd/modules";
1214     path = "/usr/local/ircd/modules/autoload";
1215    
1216     /* module: the name of a module to load on startup/rehash */
1217     #module = "some_module.so";
1218     };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28