/[svn]/ircd-hybrid-7.2/etc/example.conf
ViewVC logotype

Contents of /ircd-hybrid-7.2/etc/example.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 124 - (show annotations)
Thu Oct 13 19:48:20 2005 UTC (14 years, 3 months ago) by michael
File size: 35101 byte(s)
- Updated example.conf as suggested by pi

1 /* doc/example.conf - ircd-hybrid-7 Example configuration file
2 * Copyright (C) 2000-2005 Hybrid Development Team
3 *
4 * Written by ejb, wcampbel, db, leeh and others
5 * Other example configurations can be found in the source dir under
6 * etc/.
7 *
8 * $Id$
9 */
10
11 /* IMPORTANT NOTES:
12 *
13 * auth {} blocks MUST be specified in order of precedence. The first one
14 * that matches a user will be used. So place spoofs first, then specials,
15 * then general access.
16 *
17 * Shell style (#), C++ style (//) and C style comments are supported.
18 *
19 * Files may be included by either:
20 * .include "filename"
21 * .include <filename>
22 *
23 * Times/durations are written as:
24 * 12 hours 30 minutes 1 second
25 *
26 * Valid units of time:
27 * month, week, day, hour, minute, second
28 *
29 * Valid units of size:
30 * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31 *
32 * Sizes and times may be singular or plural.
33 */
34
35 /* EFNET NOTE:
36 *
37 * This config file is NOT suitable for EFNet. EFNet admins should use
38 * example.efnet.conf
39 */
40
41 /* serverinfo {}: Contains information about the server. (OLD M:) */
42 serverinfo {
43 /* name: the name of our server */
44 name = "hades.arpa";
45
46 /*
47 * A server's unique ID. This is three characters long and must be in
48 * the form [0-9][A-Z0-9][A-Z0-9]. The first character must be a
49 * digit, followed by 2 alpha-numerical letters.
50 * Note: The letters must be capitalized.
51 */
52 sid = "_CHANGE_ME_";
53
54 /*
55 * description: the description of the server. '[' and ']' may not
56 * be used here for compatibility with older servers.
57 */
58 description = "hybrid-7 test server";
59
60 /*
61 * network info: the name and description of the network this server
62 * is on. Shown in the 005 reply and used with serverhiding.
63 */
64 network_name = "MyNet";
65 network_desc = "This is My Network";
66
67 /*
68 * hub: allow this server to act as a hub and have multiple servers
69 * connected to it. This may not be changed if there are active
70 * LazyLink servers.
71 */
72 hub = no;
73
74 /*
75 * vhost: the IP to bind to when we connect outward to ipv4 servers.
76 * This should be an ipv4 IP only, or "* for INADDR_ANY.
77 */
78 #vhost = "192.169.0.1";
79
80 /*
81 * vhost6: the IP to bind to when we connect outward to ipv6 servers.
82 * This should be an ipv6 IP only, or "* for INADDR_ANY.
83 */
84 #vhost6 = "3ffe:80e8:546::2";
85
86 /* max_clients: the maximum number of clients allowed to connect */
87 max_clients = 512;
88
89 /*
90 * rsa key: the path to the file containing our rsa key for cryptlink.
91 *
92 * Example command to store a 2048 bit RSA keypair in
93 * rsa.key, and the public key in rsa.pub:
94 *
95 * openssl genrsa -out rsa.key 2048
96 * openssl rsa -in rsa.key -pubout -out rsa.pub
97 * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
98 * chmod 0600 rsa.key
99 * chmod 0644 rsa.pub
100 */
101 #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
102
103 /*
104 * ssl certificate: the path to the file containing our ssl certificate
105 * for encrypted client connection.
106 *
107 * This assumes your private RSA key is stored in rsa.key. You
108 * MUST have an RSA key in order to generate the certificate
109 *
110 * openssl req -new -days 3652 -x509 -key rsa.key -out cert.pem
111 *
112 * See http://www.openssl.org/docs/HOWTO/certificates.txt
113 *
114 * Please use the following values when generating the cert
115 *
116 * Organization Name: Network Name
117 * Organization Unit Name: changme.someirc.net
118 * Common Name: irc.someirc.net
119 * E-mail: you@domain.com
120 */
121 #ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
122 };
123
124 /* admin {}: contains admin information about the server. (OLD A:) */
125 admin {
126 name = "Smurf target";
127 description = "Main Server Administrator";
128 email = "<syn@packets.r.us>";
129 };
130
131 /* logging {}: contains information about logfiles. */
132 logging {
133 /* Do you want to enable logging to ircd.log? */
134 use_logging = yes;
135
136 /*
137 * logfiles: the logfiles to use for user connects, /oper uses,
138 * and failed /oper. These files must exist for logging to be used.
139 */
140 fuserlog = "logs/userlog";
141 foperlog = "logs/operlog";
142 fkilllog = "logs/kill";
143 fklinelog = "logs/kline";
144 fglinelog = "logs/gline";
145
146 /*
147 * log level: the amount of detail to log in ircd.log. The
148 * higher, the more information is logged. May be changed
149 * once the server is running via /quote SET LOG. Either:
150 * L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
151 */
152 log_level = L_INFO;
153 };
154
155 /* log is a synonym for logging
156 * fname_userlog is a synonym for fuserlog
157 * fname_operlog is a synonym for foperlog
158 * fname_killlog is a synonym for fkilllog
159 * fname_glinelog is a synonym for fglinelog
160 * hence this is equivalent to the above
161 */
162 log {
163 fname_userlog = "logs/userlog";
164 fname_operlog = "logs/operlog";
165 fname_killlog = "logs/kill";
166 fname_klinelog = "logs/kline";
167 fname_glinelog = "logs/gline";
168 log_level = L_INFO;
169 };
170
171 /* class {}: contain information about classes for users (OLD Y:) */
172 class {
173 /* name: the name of the class. classes are text now */
174 name = "users";
175
176 /*
177 * ping_time: how often a client must reply to a PING from the
178 * server before they are dropped.
179 */
180 ping_time = 1 minute 30 seconds;
181
182 /* optional: how many local users are allowed to connect from one IP */
183 number_per_ip = 4;
184
185 /*
186 * optional: how many local users are allowed to connect
187 * from one ident@host
188 */
189 max_local = 2;
190
191 /* optional: network-wide limit of users per ident@host */
192 max_global = 10;
193
194 /* optional: the maximum number of users allowed in this class */
195 max_number = 100;
196
197 /*
198 * the following lines are optional and allow you to define
199 * how many users can connect from one /NN subnet
200 */
201 cidr_bitlen_ipv4 = 24;
202 cidr_bitlen_ipv6 = 120;
203 number_per_cidr = 16;
204
205 /*
206 * sendq: the amount of data allowed in a clients queue before
207 * they are dropped.
208 */
209 sendq = 100 kbytes;
210 };
211
212 class {
213 name = "opers";
214 ping_time = 5 minutes;
215 number_per_ip = 10;
216 max_number = 100;
217 sendq = 100kbytes;
218 };
219
220 class {
221 name = "server";
222 ping_time = 1 minute 30 seconds;
223
224 /*
225 * ping_warning: how fast a server must reply to a PING before
226 * a warning to opers is generated.
227 */
228 ping_warning = 15 seconds;
229
230 /*
231 * connectfreq: only used in server classes. Specifies the delay
232 * between autoconnecting to servers.
233 */
234 connectfreq = 5 minutes;
235
236 /* max number: the amount of servers to autoconnect to */
237 max_number = 1;
238
239 /* sendq: servers need a higher sendq as they send more data */
240 sendq = 2 megabytes;
241 };
242
243 /* listen {}: contain information about the ports ircd listens on (OLD P:) */
244 listen {
245 /*
246 * port: the specific port to listen on. If no host is specified
247 * before, it will listen on all available IPs.
248 *
249 * Ports are separated via a comma, a range may be specified using ".."
250 */
251
252 /* port: listen on all available IPs, ports 6665 to 6669 */
253 port = 6665 .. 6669;
254
255 /*
256 * Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
257 * unless you are an administrator.
258 *
259 * NOTE: The "flags" directive has to come before "port". Always!
260 */
261 flags = hidden, ssl;
262 host = "192.168.0.1";
263 port = 6697;
264
265 /*
266 * host: set a specific IP/host the ports after the line will listen
267 * on. This may be ipv4 or ipv6.
268 */
269 host = "1.2.3.4";
270 port = 7000, 7001;
271
272 host = "3ffe:1234:a:b:c::d";
273 port = 7002;
274 };
275
276 /* auth {}: allow users to connect to the ircd (OLD I:) */
277 auth {
278 /*
279 * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
280 * lines are permitted per auth block.
281 */
282 user = "*@172.16.0.0/12";
283 user = "*test@123D:B567:*";
284
285 /* password: an optional password that is required to use this block */
286 password = "letmein";
287
288 /*
289 * encrypted: controls whether the auth password above has been
290 * encrypted.
291 */
292 encrypted = yes;
293
294 /*
295 * spoof: fake the users host to this. This is free-form,
296 * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
297 */
298 spoof = "I.still.hate.packets";
299
300 /* class: the class the user is placed in */
301 class = "opers";
302
303 /*
304 * need_password: don't allow users who haven't supplied the correct
305 * password to connect using another auth{} block
306 * ('&' prefix on /stats I if disabled)
307 * need_ident: require the user to have identd to connect ('+' prefix on /stats I)
308 * spoof_notice: enable spoofing notification to admins
309 * exceed_limit: allow a user to exceed class limits ('>' prefix on /stats I)
310 * kline_exempt: exempt this user from k/glines ('^' prefix on /stats I)
311 * gline_exempt: exempt this user from glines ('_' prefix on /stats I)
312 * resv_exempt: exempt this user from resvs ('$' prefix on /stats I)
313 * no_tilde: remove ~ from a user with no ident ('-' prefix on /stats I)
314 * can_flood: allow this user to exceed flood limits ('|' prefix on /stats I)
315 * can_idle: exempt this use from idle restrictions ('<' prefix on /stats I)
316 */
317 flags = need_password, spoof_notice, exceed_limit, kline_exempt,
318 gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
319 };
320
321 auth {
322 /*
323 * redirect: the server and port to redirect a user to. A user does
324 * not have to obey the redirection, the ircd just suggests an alternative
325 * server for them.
326 */
327 redirserv = "irc.fi";
328 redirport = 6667;
329
330 user = "*.fi";
331
332 /* class: a class is required even though it is not used */
333 class = "users";
334 };
335
336 auth {
337 user = "*@*";
338 class = "users";
339 flags = need_ident;
340 };
341
342 /* operator {}: defines ircd operators. (OLD O:)
343 * ircd-hybrid no longer supports local operators, privileges are
344 * controlled via flags.
345 */
346 operator {
347 /* name: the name of the oper */
348 /* Note: operator "opername"{} is also supported */
349 name = "god";
350
351 /*
352 * user: the user@host required for this operator. CIDR is not
353 * supported. Multiple user="" lines are supported.
354 */
355 user = "*god@*";
356 user = "*@127.0.0.1";
357
358 /*
359 * password: the password required to oper. By default this will
360 * need to be encrypted using 'mkpasswd'. MD5 is supported.
361 */
362 password = "etcnjl8juSU1E";
363
364 /*
365 * encrypted: controls whether the oper password above has been
366 * encrypted. (OLD CRYPT_OPER_PASSWORD now optional per operator)
367 */
368 encrypted = yes;
369
370 /*
371 * rsa_public_key_file: the public key for this oper when using Challenge.
372 * A password should not be defined when this is used, see
373 * doc/challenge.txt for more information.
374 */
375 # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
376
377 /* class: the class the oper joins when they successfully /oper */
378 class = "opers";
379
380 /*
381 * umodes: default usermodes opers get when they /oper. If defined,
382 * it will override oper_umodes settings in general {}.
383 * Available usermodes:
384 *
385 * +b - bots - See bot and drone flooding notices
386 * +c - cconn - Client connection/quit notices
387 * +D - deaf - Don't receive channel messages
388 * +d - debug - See debugging notices
389 * +f - full - See I: line full notices
390 * +G - softcallerid - Server Side Ignore for users not on your channels
391 * +g - callerid - Server Side Ignore (for privmsgs etc)
392 * +i - invisible - Not shown in NAMES or WHO unless you share a
393 * a channel
394 * +k - skill - See server generated KILL messages
395 * +l - locops - See LOCOPS messages
396 * +n - nchange - See client nick changes
397 * +r - rej - See rejected client notices
398 * +s - servnotice - See general server notices
399 * +u - unauth - See unauthorized client notices
400 * +w - wallop - See server generated WALLOPS
401 * +x - external - See remote server connection and split notices
402 * +y - spy - See LINKS, STATS, TRACE notices etc.
403 * +z - operwall - See oper generated WALLOPS
404 */
405 # umodes = locops, servnotice, operwall, wallop;
406
407 /*
408 * privileges: controls the activities and commands an oper is
409 * allowed to do on the server. All options default to no.
410 * Available options:
411 *
412 * global_kill: allows remote users to be /KILL'd (OLD 'O' flag)
413 * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
414 * remoteban: allows remote KLINE/UNKLINE
415 * kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
416 * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
417 * gline: allows GLINE (OLD 'G' flag)
418 * xline: allows XLINE (OLD 'X' flag)
419 * operwall: allows OPERWALL
420 * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
421 * via usermode +n
422 * rehash: allows oper to REHASH config (OLD 'H' flag)
423 * die: allows DIE and RESTART (OLD 'D' flag)
424 * admin: gives admin privileges. admins
425 * may (un)load modules and see the
426 * real IPs of servers.
427 * hidden_admin: same as 'admin', but noone can recognize you as
428 * being an admin
429 * hidden_oper: not shown in /stats p (except for other operators)
430 */
431 /* You can either use
432 * die = yes;
433 * rehash = yes;
434 *
435 * or in a flags statement i.e.
436 * flags = die, rehash;
437 *
438 * You can also negate a flag with ~ i.e.
439 * flags = ~remote;
440 *
441 */
442 flags = global_kill, remote, kline, unkline, xline,
443 die, rehash, nick_changes, admin, operwall;
444 };
445
446 /* connect {}: controls servers we connect to (OLD C:, N:, H:, L:) */
447 connect {
448 /* name: the name of the server */
449 name = "irc.uplink.com";
450
451 /*
452 * host: the host or IP to connect to. If a hostname is used it
453 * must match the reverse dns of the server.
454 */
455 host = "192.168.0.1";
456
457 /*
458 * passwords: the passwords we send (OLD C:) and accept (OLD N:).
459 * The remote server will have these passwords reversed.
460 */
461 send_password = "password";
462 accept_password = "anotherpassword";
463
464 /*
465 * encrypted: controls whether the accept_password above has been
466 * encrypted. (OLD CRYPT_LINK_PASSWORD now optional per connect)
467 */
468 encrypted = no;
469
470 /* port: the port to connect to this server on */
471 port = 6666;
472
473 /*
474 * hub_mask: the mask of servers that this server may hub. Multiple
475 * entries are permitted
476 */
477 hub_mask = "*";
478
479 /*
480 * leaf_mask: the mask of servers this server may not hub. Multiple
481 * entries are permitted. Useful for forbidding EU -> US -> EU routes.
482 */
483 # leaf_mask = "*.uk";
484
485 /* masking: the servername we pretend to be when we connect */
486 # fakename = "*.arpa";
487
488 /* class: the class this server is in */
489 class = "server";
490
491 /*
492 * autoconn: controls whether we autoconnect to this server or not,
493 * dependent on class limits. By default, this is disabled.
494 * compressed: controls whether traffic is compressed via ziplinks.
495 * By default, this is disabled
496 * lazylink: controls whether this server is a LazyLink. LazyLink
497 * servers may NOT hub. See doc/LazyLinks.txt
498 * cryptlink: enable full encryption for all data passing between our
499 * server and this link and rsa authentication.
500 * burst_away: This will send the /away string that users have set
501 * on the server burst. Note this can be a lot of data
502 * and slow down your server burst.
503 */
504 # flags = autoconn, lazylink, compressed, cryptlink, burst_away;
505 };
506
507 connect {
508 name = "encrypted.auth.example";
509 host = "some.host.somewhere";
510 port = 6667;
511
512 flags = cryptlink;
513
514 /*
515 * rsa_public_key_file: the path to the public keyfile of the server.
516 * Used instead of passwords.
517 */
518 rsa_public_key_file = "etc/remote.server.keyfile";
519
520 /*
521 * cipher preference: set the preferred cipher for this link
522 *
523 * Available ciphers are:
524 * BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
525 * RC5.12/128 RC5.8/128 3DES/168 DES/56
526 *
527 * NOTE: Some ciphers may not be supported by your OpenSSL.
528 * Check the output from 'configure' for available ciphers.
529 *
530 * NOTE2: To help you decide what cipher to use, tools/encspeed
531 * will show you approximately how fast each cipher is.
532 * However, blowfish is fast and secure, and is probably
533 * a good default for most situations.
534 *
535 * NOTE3: Default if none is set is BF/128
536 *
537 * The cipher *MUST* be the same in both directions. If you
538 * set a cipher preference, your uplink must set the same cipher,
539 * else it will not link.
540 */
541 # cipher_preference = "BF/168";
542 };
543
544 /*
545 * Note: Don't add an extra 'name=' entry if you use
546 * the connect "name"{} feature
547 */
548 connect "ipv6.some.server" {
549 host = "3ffd:dead:beef::1";
550 send_password = "password";
551 accept_password = "password";
552 port = 6666;
553
554 /*
555 * aftype: controls whether the connection uses "ipv4" or "ipv6".
556 * Default is ipv4.
557 */
558 aftype = ipv6;
559 class = "server";
560 };
561
562 /* cluster{}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
563 * automatically (OLD hyb6 SLAVE_SERVERS)
564 */
565 cluster {
566 /* name: the server to share with, this can take wildcards */
567 /* NOTE: only local actions will be clustered, meaning if
568 * the server receives a shared kline/unkline/etc, it
569 * will not be propagated to clustered servers.
570 *
571 * Remote servers are not necessarily required to accept
572 * clustered lines, they need a shared{} for *THIS* server
573 * in order to accept them.
574 */
575 name = "*.arpa";
576
577 /*
578 * type: list of what to share, options are as follows:
579 * kline - share klines
580 * tkline - share temporary klines
581 * unkline - share unklines
582 * xline - share xlines
583 * txline - share temporary xlines
584 * unxline - share unxlines
585 * resv - share resvs
586 * tresv - share temporary resvs
587 * unresv - share unresvs
588 * locops - share locops
589 * all - share all of the above (default)
590 */
591 type = kline, unkline, locops, xline, resv;
592 };
593
594 /* shared {}: users that are allowed to remote kline (OLD U:) */
595 shared {
596 /*
597 * name: the server the user must be on to set klines. If this is not
598 * specified, the user will be allowed to kline from all servers.
599 */
600 name = "irc2.some.server";
601
602 /*
603 * user: the user@host mask that is allowed to set klines. If this is
604 * not specified, all users on the server above will be allowed to set
605 * a remote kline.
606 */
607 user = "oper@my.host.is.spoofed";
608
609 /*
610 * type: list of what to share, options are as follows:
611 * kline - allow oper/server to kline
612 * tkline - allow temporary klines
613 * unkline - allow oper/server to unkline
614 * xline - allow oper/server to xline
615 * txline - allow temporary xlines
616 * unxline - allow oper/server to unxline
617 * resv - allow oper/server to resv
618 * tresv - allow temporary resvs
619 * unresv - allow oper/server to unresv
620 * locops - allow oper/server to locops - only used for servers that cluster
621 * all - allow oper/server to do all of the above (default)
622 */
623 type = kline, unkline, resv;
624 };
625
626 /* kill {}: users that are not allowed to connect (OLD K:)
627 * Oper issued klines will be added to the specified kline config
628 */
629 kill {
630 user = "bad@*.hacked.edu";
631 reason = "Obviously hacked account";
632 };
633
634 kill {
635 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.org$";
636 type = regex;
637 };
638
639 /* deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
640 * Oper issued dlines will be added to the specified dline config
641 */
642 deny {
643 ip = "10.0.1.0/24";
644 reason = "Reconnecting vhosted bots";
645 };
646
647 /* exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:) */
648 exempt {
649 ip = "192.168.0.0/16";
650 };
651
652 /* resv {}: nicks and channels users may not use/join (OLD Q:) */
653 resv {
654 /* reason: the reason for the proceeding resv's */
655 reason = "There are no services on this network";
656
657 /* resv: the nicks and channels users may not join/use */
658 nick = "nickserv";
659 nick = "chanserv";
660 channel = "#services";
661
662 /* resv: wildcard masks are also supported in nicks only */
663 reason = "Clone bots";
664 nick = "clone*";
665 };
666
667 /* gecos {}: The X: replacement, used for banning users based on their
668 * "realname".
669 */
670 gecos {
671 name = "*sex*";
672 reason = "Possible spambot";
673 };
674
675 gecos {
676 name = "sub7server";
677 reason = "Trojan drone";
678 };
679
680 gecos {
681 name = "*http*";
682 reason = "Spambot";
683 };
684
685 gecos {
686 name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
687 type = regex;
688 };
689
690 /*
691 * channel {}
692 *
693 * The channel block contains options pertaining to channels
694 */
695 channel {
696 /*
697 * restrict_channels: reverse channel RESVs logic, only reserved
698 * channels are allowed
699 */
700 restrict_channels = no;
701
702 /*
703 * disable_local_channels: prevent users from joining &channels.
704 */
705 disable_local_channels = no;
706
707 /*
708 * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
709 * that can join a +i channel without an invite.
710 */
711 use_invex = yes;
712
713 /*
714 * use_except: Enable/disable channel mode +e, a n!u@h list of masks
715 * that can join a channel through a ban (+b).
716 */
717 use_except = yes;
718
719 /*
720 * use_knock: Allows users to request an invite to a channel that
721 * is locked somehow (+ikl). If the channel is +p or you are banned
722 * the knock will not be sent.
723 */
724 use_knock = yes;
725
726 /*
727 * knock_delay: The amount of time a user must wait between issuing
728 * the knock command.
729 */
730 knock_delay = 5 minutes;
731
732 /*
733 * knock_delay_channel: How often a knock to any specific channel
734 * is permitted, regardless of the user sending the knock.
735 */
736 knock_delay_channel = 1 minute;
737
738 /*
739 * invite_ops_only: Restrict /invite to ops/halfops on channels,
740 * rather than allowing unopped users to invite people to a -i channel.
741 */
742 invite_ops_only = yes;
743
744 /* max chans: The maximum number of channels a user can join/be on. */
745 max_chans_per_user = 15;
746
747 /* quiet_on_ban: stop banned people talking in channels. */
748 quiet_on_ban = yes;
749
750 /* max_bans: maximum number of +b/e/I modes in a channel */
751 max_bans = 25;
752
753 /*
754 * splitcode: The ircd will now check splitmode every few seconds.
755 *
756 * Either split users or split servers can activate splitmode, but
757 * both conditions must be met for the ircd to deactivate splitmode.
758 *
759 * You may force splitmode to be permanent by /quote set splitmode on
760 */
761
762 /*
763 * default_split_user_count: when the usercount is lower than this level,
764 * consider ourselves split. This must be set for automatic splitmode.
765 */
766 default_split_user_count = 0;
767
768 /*
769 * default_split_server_count: when the servercount is lower than this,
770 * consider ourselves split. This must be set for automatic splitmode.
771 */
772 default_split_server_count = 0;
773
774 /* split no create: disallow users creating channels on split. */
775 no_create_on_split = yes;
776
777 /* split: no join: disallow users joining channels at all on a split */
778 no_join_on_split = no;
779
780 /* burst topicwho: enable sending of who set topic on topicburst */
781 /* default is yes */
782 burst_topicwho = yes;
783
784 /*
785 * how many joins in how many seconds constitute a flood, use 0 to
786 * disable. +b opers will be notified (changeable via /set)
787 */
788 join_flood_count = 16;
789 join_flood_time = 8 seconds;
790 };
791
792 /*
793 * serverhide {}
794 *
795 * The serverhide block contains the options regarding serverhiding
796 */
797 serverhide {
798 /*
799 * flatten_links: this option will show all servers in /links appear
800 * that they are linked to this current server
801 */
802 flatten_links = no;
803
804 /*
805 * links_delay: how often to update the links file when it is
806 * flattened.
807 */
808 links_delay = 5 minutes;
809
810 /*
811 * hidden: hide this server from a /links output on servers that
812 * support it. this allows hub servers to be hidden etc.
813 */
814 hidden = no;
815
816 /*
817 * disable_hidden: prevent servers hiding themselves from a
818 * /links output.
819 */
820 disable_hidden = no;
821
822 /*
823 * hide_servers: hide remote servernames everywhere and instead use
824 * hidden_name and network_desc.
825 */
826 hide_servers = no;
827
828 /*
829 * Use this as the servername users see if hide_servers = yes.
830 */
831 hidden_name = "*.hidden.com";
832
833 /*
834 * hide_server_ips: If this is disabled, opers will be unable to see servers
835 * ips and will be shown a masked ip, admins will be shown the real ip.
836 *
837 * If this is enabled, nobody can see a servers ip. *This is a kludge*, it
838 * has the side effect of hiding the ips everywhere, including logfiles.
839 *
840 * We recommend you leave this disabled, and just take care with who you
841 * give admin=yes; to.
842 */
843 hide_server_ips = no;
844 };
845
846 /*
847 * general {}
848 *
849 * The general block contains many of the options that were once compiled
850 * in options in config.h. The general block is read at start time.
851 */
852 general {
853 /*
854 * gline_min_cidr: the minimum required length of a CIDR bitmask
855 * for IPv4 based glines
856 */
857 gline_min_cidr = 16;
858
859 /*
860 * gline_min_cidr6: the minimum required length of a CIDR bitmask
861 * for IPv6 based glines
862 */
863 gline_min_cidr6 = 48;
864
865 /*
866 * Whether to automatically set mode +i on connecting users.
867 */
868 invisible_on_connect = yes;
869
870 /*
871 * If you don't explicitly specify burst_away in your connect blocks, then
872 * they will default to the burst_away value below.
873 */
874 burst_away = no;
875
876 /*
877 * Show "actually using host <ip>" on /whois when possible.
878 */
879 use_whois_actually = yes;
880
881 /*
882 * Max time from the nickname change that still causes KILL
883 * automatically to switch for the current nick of that user. (seconds)
884 */
885 kill_chase_time_limit = 90;
886
887 /*
888 * If hide_spoof_ips is disabled, opers will be allowed to see the real IP of spoofed
889 * users in /trace etc. If this is defined they will be shown a masked IP.
890 */
891 hide_spoof_ips = yes;
892
893 /*
894 * Ignore bogus timestamps from other servers. Yes, this will desync
895 * the network, but it will allow chanops to resync with a valid non TS 0
896 *
897 * This should be enabled network wide, or not at all.
898 */
899 ignore_bogus_ts = no;
900
901 /*
902 * disable_auth: completely disable ident lookups; if you enable this,
903 * be careful of what you set need_ident to in your auth {} blocks
904 */
905 disable_auth = no;
906
907 /* disable_remote_commands: disable users doing commands on remote servers */
908 disable_remote_commands = no;
909
910 /*
911 * Disable temporary kline/xline expire notices yes/no
912 */
913 tkline_expire_notices = no;
914
915 /*
916 * default_floodcount: the default value of floodcount that is configurable
917 * via /quote set floodcount. This is the amount of lines a user
918 * may send to any other user/channel in one second.
919 */
920 default_floodcount = 10;
921
922 /*
923 * failed_oper_notice: send a notice to all opers on the server when
924 * someone tries to OPER and uses the wrong password, host or ident.
925 */
926 failed_oper_notice = yes;
927
928 /*
929 * dots_in_ident: the amount of '.' characters permitted in an ident
930 * reply before the user is rejected.
931 */
932 dots_in_ident = 2;
933
934 /*
935 * dot_in_ip6_addr: ircd-hybrid-6.0 and earlier will disallow hosts
936 * without a '.' in them. this will add one to the end. only needed
937 * for older servers.
938 */
939 dot_in_ip6_addr = yes;
940
941 /*
942 * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
943 * placed via the server. klines hand placed are exempt from limits.
944 * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
945 */
946 min_nonwildcard = 4;
947
948 /*
949 * min_nonwildcard_simple: the minimum non wildcard characters in
950 * gecos bans. wildcard chars: '*' '?' '#'
951 */
952 min_nonwildcard_simple = 3;
953
954 /* max_accept: maximum allowed /accept's for +g usermode */
955 max_accept = 20;
956
957 /* anti_nick_flood: enable the nickflood control code */
958 anti_nick_flood = yes;
959
960 /* nick flood: the nick changes allowed in the specified period */
961 max_nick_time = 20 seconds;
962 max_nick_changes = 5;
963
964 /*
965 * anti_spam_exit_message_time: the minimum time a user must be connected
966 * before custom quit messages are allowed.
967 */
968 anti_spam_exit_message_time = 5 minutes;
969
970 /*
971 * ts delta: the time delta allowed between server clocks before
972 * a warning is given, or before the link is dropped. all servers
973 * should run ntpdate/rdate to keep clocks in sync
974 */
975 ts_warn_delta = 30 seconds;
976 ts_max_delta = 5 minutes;
977
978 /*
979 * kline_with_reason: show the user the reason why they are k/d/glined
980 * on exit. May give away who set k/dline when set via tcm.
981 */
982 kline_with_reason = yes;
983
984 /*
985 * kline_reason: show this message to users on channel
986 * instead of the oper reason.
987 */
988 kline_reason = "Connection closed";
989
990 /*
991 * reject_hold_time: wait this amount of time before disconnecting
992 * a rejected client. Use 0 to disable.
993 */
994 reject_hold_time = 0;
995
996 /*
997 * warn_no_nline: warn opers about servers that try to connect but
998 * we don't have a connect {} block for. Twits with misconfigured
999 * servers can get really annoying with this enabled.
1000 */
1001 warn_no_nline = yes;
1002
1003 /* stats_o_oper only: make stats o (opers) oper only */
1004 stats_o_oper_only = yes;
1005
1006 /* stats_P_oper_only: make stats P (ports) oper only */
1007 stats_P_oper_only = no;
1008
1009 /*
1010 * stats i oper only: make stats i (auth {}) oper only. set to:
1011 * yes: show users no auth blocks, made oper only.
1012 * masked: show users first matching auth block
1013 * no: show users all auth blocks.
1014 */
1015 stats_i_oper_only = masked;
1016
1017 /*
1018 * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1019 * yes: show users no auth blocks, made oper only
1020 * masked: show users first matching auth block
1021 * no: show users all auth blocks.
1022 */
1023 stats_k_oper_only = masked;
1024
1025 /*
1026 * caller_id_wait: time between notifying a +g user that somebody
1027 * is messaging them.
1028 */
1029 caller_id_wait = 1 minute;
1030
1031 /*
1032 * opers_bypass_callerid: allows operators to bypass +g and message
1033 * anyone who has it set (useful if you use services).
1034 */
1035 opers_bypass_callerid = no;
1036
1037 /*
1038 * pace_wait_simple: time between use of less intensive commands
1039 * (HELP, remote WHOIS, WHOWAS)
1040 */
1041 pace_wait_simple = 1 second;
1042
1043 /*
1044 * pace_wait: time between more intensive commands
1045 * (ADMIN, INFO, LIST, LUSERS, MOTD, STATS, VERSION)
1046 */
1047 pace_wait = 10 seconds;
1048
1049 /*
1050 * short_motd: send clients a notice telling them to read the motd
1051 * instead of forcing a motd to clients who may simply ignore it.
1052 */
1053 short_motd = no;
1054
1055 /*
1056 * ping_cookie: require clients to respond exactly to a ping command,
1057 * can help block certain types of drones and FTP PASV mode spoofing.
1058 */
1059 ping_cookie = no;
1060
1061 /* no_oper_flood: increase flood limits for opers. */
1062 no_oper_flood = yes;
1063
1064 /*
1065 * true_no_oper_flood: completely eliminate flood limits for opers
1066 * and for clients with can_flood = yes in their auth {} blocks
1067 */
1068 true_no_oper_flood = yes;
1069
1070 /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1071 oper_pass_resv = yes;
1072
1073 /*
1074 * idletime: the maximum amount of time a user may idle before
1075 * they are disconnected
1076 */
1077 idletime = 0;
1078
1079 /* REMOVE ME. The following line checks you've been reading. */
1080 havent_read_conf = 1;
1081
1082 /*
1083 * max_targets: the maximum amount of targets in a single
1084 * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1085 */
1086 max_targets = 4;
1087
1088 /*
1089 * client_flood: maximum amount of data in a clients queue before
1090 * they are dropped for flooding.
1091 */
1092 client_flood = 2560 bytes;
1093
1094 /*
1095 * message_locale: the default message locale
1096 * Use "standard" for the compiled in defaults.
1097 * To install the translated messages, go into messages/ in the
1098 * source directory and run `make install'.
1099 */
1100 message_locale = "standard";
1101
1102 /*
1103 * usermodes configurable: a list of usermodes for the options below
1104 *
1105 * +b - bots - See bot and drone flooding notices
1106 * +c - cconn - Client connection/quit notices
1107 * +D - deaf - Don't receive channel messages
1108 * +d - debug - See debugging notices
1109 * +f - full - See I: line full notices
1110 * +G - softcallerid - Server Side Ignore for users not on your channels
1111 * +g - callerid - Server Side Ignore (for privmsgs etc)
1112 * +i - invisible - Not shown in NAMES or WHO unless you share a
1113 * a channel
1114 * +k - skill - See server generated KILL messages
1115 * +l - locops - See LOCOPS messages
1116 * +n - nchange - See client nick changes
1117 * +r - rej - See rejected client notices
1118 * +s - servnotice - See general server notices
1119 * +u - unauth - See unauthorized client notices
1120 * +w - wallop - See server generated WALLOPS
1121 * +x - external - See remote server connection and split notices
1122 * +y - spy - See LINKS, STATS, TRACE notices etc.
1123 * +z - operwall - See oper generated WALLOPS
1124 */
1125
1126 /* oper_only_umodes: usermodes only opers may set */
1127 oper_only_umodes = bots, cconn, debug, full, skill, nchange,
1128 rej, spy, external, operwall, locops, unauth;
1129
1130 /* oper_umodes: default usermodes opers get when they /oper */
1131 oper_umodes = locops, servnotice, operwall, wallop;
1132
1133 /*
1134 * servlink_path: path to 'servlink' program used by ircd to handle
1135 * encrypted/compressed server <-> server links.
1136 *
1137 * only define if servlink is not in same directory as ircd itself.
1138 */
1139 #servlink_path = "/usr/local/ircd/bin/servlink";
1140
1141 /*
1142 * default_cipher_preference: default cipher to use for cryptlink when none is
1143 * specified in connect block.
1144 */
1145 #default_cipher_preference = "BF/168";
1146
1147 /*
1148 * use_egd: if your system does not have *random devices yet you
1149 * want to use OpenSSL and encrypted links, enable this. Beware -
1150 * EGD is *very* CPU intensive when gathering data for its pool
1151 */
1152 # use_egd = yes;
1153
1154 /*
1155 * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1156 * which automatically finds the path.
1157 */
1158 # egdpool_path = "/var/run/egd-pool";
1159
1160
1161 /*
1162 * compression_level: level of compression for compressed links between
1163 * servers.
1164 *
1165 * values are between: 1 (least compression, fastest)
1166 * and: 9 (most compression, slowest).
1167 */
1168 # compression_level = 6;
1169
1170 /*
1171 * throttle_time: the minimum amount of time between connections from
1172 * the same ip. exempt {} blocks are excluded from this throttling.
1173 * Offers protection against flooders who reconnect quickly.
1174 * Set to 0 to disable.
1175 */
1176 throttle_time = 10;
1177 };
1178
1179 glines {
1180 /* enable: enable glines, network wide temp klines */
1181 enable = yes;
1182
1183 /* duration: the amount of time a gline will remain on your server before expiring */
1184 duration = 1 day;
1185
1186 /* logging: which types of rules you want to log when triggered (choose reject or block) */
1187 logging = reject, block;
1188
1189 /*
1190 * NOTE: gline ACLs can cause a desync of glines throughout the network, meaning some servers
1191 * may have a gline triggered, and others may not. Also, you only need insert rules for glines
1192 * that you want to block and/or reject. If you want to accept and propagate the gline, do NOT
1193 * put a rule for it.
1194 */
1195
1196 /* user@host for rule to apply to */
1197 user = "god@I.still.hate.packets";
1198 /* server for rule to apply to */
1199 name = "hades.arpa";
1200
1201 /*
1202 * action: action to take when a matching gline is found. options are:
1203 * reject - do not apply the gline locally
1204 * block - do not propagate the gline
1205 */
1206 action = reject, block;
1207
1208 user = "god@*";
1209 name = "*";
1210 action = block;
1211 };
1212
1213 modules {
1214 /*
1215 * module path: other paths to search for modules specified below
1216 * and in /modload.
1217 */
1218 path = "/usr/local/ircd/modules";
1219 path = "/usr/local/ircd/modules/autoload";
1220
1221 /* module: the name of a module to load on startup/rehash */
1222 #module = "some_module.so";
1223 };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.26