/[svn]/ircd-hybrid-7.2/etc/example.conf
ViewVC logotype

Contents of /ircd-hybrid-7.2/etc/example.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 555 - (show annotations)
Sat Apr 22 09:39:44 2006 UTC (14 years, 3 months ago) by michael
File size: 35361 byte(s)
- Updated RELNOTED.  Added missing entries etc..
  BUGS, TODO, INSTALL: likewise
- Fixed formatting in example.conf

1 /* doc/example.conf - ircd-hybrid-7 Example configuration file
2 * Copyright (C) 2000-2005 Hybrid Development Team
3 *
4 * Written by ejb, wcampbel, db, leeh and others
5 * Other example configurations can be found in the source dir under
6 * etc/.
7 *
8 * $Id$
9 */
10
11 /* IMPORTANT NOTES:
12 *
13 * auth {} blocks MUST be specified in order of precedence. The first one
14 * that matches a user will be used. So place spoofs first, then specials,
15 * then general access.
16 *
17 * Shell style (#), C++ style (//) and C style comments are supported.
18 *
19 * Files may be included by either:
20 * .include "filename"
21 * .include <filename>
22 *
23 * Times/durations are written as:
24 * 12 hours 30 minutes 1 second
25 *
26 * Valid units of time:
27 * month, week, day, hour, minute, second
28 *
29 * Valid units of size:
30 * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31 *
32 * Sizes and times may be singular or plural.
33 */
34
35 /* EFNET NOTE:
36 *
37 * This config file is NOT suitable for EFNet. EFNet admins should use
38 * example.efnet.conf
39 */
40
41 /* serverinfo {}: Contains information about the server. (OLD M:) */
42 serverinfo {
43 /* name: the name of our server */
44 name = "hades.arpa";
45
46 /*
47 * A server's unique ID. This is three characters long and must be in
48 * the form [0-9][A-Z0-9][A-Z0-9]. The first character must be a
49 * digit, followed by 2 alpha-numerical letters.
50 * Note: The letters must be capitalized.
51 */
52 sid = "_CHANGE_ME_";
53
54 /*
55 * description: the description of the server. '[' and ']' may not
56 * be used here for compatibility with older servers.
57 */
58 description = "hybrid-7 test server";
59
60 /*
61 * network info: the name and description of the network this server
62 * is on. Shown in the 005 reply and used with serverhiding.
63 */
64 network_name = "MyNet";
65 network_desc = "This is My Network";
66
67 /*
68 * hub: allow this server to act as a hub and have multiple servers
69 * connected to it. This may not be changed if there are active
70 * LazyLink servers.
71 */
72 hub = no;
73
74 /*
75 * vhost: the IP to bind to when we connect outward to ipv4 servers.
76 * This should be an ipv4 IP only, or "* for INADDR_ANY.
77 */
78 #vhost = "192.169.0.1";
79
80 /*
81 * vhost6: the IP to bind to when we connect outward to ipv6 servers.
82 * This should be an ipv6 IP only, or "* for INADDR_ANY.
83 */
84 #vhost6 = "3ffe:80e8:546::2";
85
86 /* max_clients: the maximum number of clients allowed to connect */
87 max_clients = 512;
88
89 /*
90 * rsa key: the path to the file containing our rsa key for cryptlink.
91 *
92 * Example command to store a 2048 bit RSA keypair in
93 * rsa.key, and the public key in rsa.pub:
94 *
95 * openssl genrsa -out rsa.key 2048
96 * openssl rsa -in rsa.key -pubout -out rsa.pub
97 * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
98 * chmod 0600 rsa.key
99 * chmod 0644 rsa.pub
100 */
101 #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
102
103 /*
104 * ssl certificate: the path to the file containing our ssl certificate
105 * for encrypted client connection.
106 *
107 * This assumes your private RSA key is stored in rsa.key. You
108 * MUST have an RSA key in order to generate the certificate
109 *
110 * openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
111 *
112 * See http://www.openssl.org/docs/HOWTO/certificates.txt
113 *
114 * Please use the following values when generating the cert
115 *
116 * Organization Name: Network Name
117 * Organization Unit Name: changme.someirc.net
118 * Common Name: irc.someirc.net
119 * E-mail: you@domain.com
120 */
121 #ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
122 };
123
124 /* admin {}: contains admin information about the server. (OLD A:) */
125 admin {
126 name = "Smurf target";
127 description = "Main Server Administrator";
128 email = "<syn@packets.r.us>";
129 };
130
131 /* logging {}: contains information about logfiles. */
132 logging {
133 /* Do you want to enable logging to ircd.log? */
134 use_logging = yes;
135
136 /*
137 * logfiles: the logfiles to use for user connects, /oper uses,
138 * and failed /oper. These files must exist for logging to be used.
139 */
140 fuserlog = "logs/userlog";
141 foperlog = "logs/operlog";
142 fkilllog = "logs/kill";
143 fklinelog = "logs/kline";
144 fglinelog = "logs/gline";
145
146 /*
147 * log level: the amount of detail to log in ircd.log. The
148 * higher, the more information is logged. May be changed
149 * once the server is running via /quote SET LOG. Either:
150 * L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
151 */
152 log_level = L_INFO;
153 };
154
155 /* log is a synonym for logging
156 * fname_userlog is a synonym for fuserlog
157 * fname_operlog is a synonym for foperlog
158 * fname_killlog is a synonym for fkilllog
159 * fname_glinelog is a synonym for fglinelog
160 * hence this is equivalent to the above
161 */
162 log {
163 fname_userlog = "logs/userlog";
164 fname_operlog = "logs/operlog";
165 fname_killlog = "logs/kill";
166 fname_klinelog = "logs/kline";
167 fname_glinelog = "logs/gline";
168 log_level = L_INFO;
169 };
170
171 /* class {}: contain information about classes for users (OLD Y:) */
172 class {
173 /* name: the name of the class. classes are text now */
174 name = "users";
175
176 /*
177 * ping_time: how often a client must reply to a PING from the
178 * server before they are dropped.
179 */
180 ping_time = 1 minute 30 seconds;
181
182 /* optional: how many local users are allowed to connect from one IP */
183 number_per_ip = 4;
184
185 /*
186 * optional: how many local users are allowed to connect
187 * from one ident@host
188 */
189 max_local = 2;
190
191 /* optional: network-wide limit of users per ident@host */
192 max_global = 10;
193
194 /* optional: the maximum number of users allowed in this class */
195 max_number = 100;
196
197 /*
198 * the following lines are optional and allow you to define
199 * how many users can connect from one /NN subnet
200 */
201 cidr_bitlen_ipv4 = 24;
202 cidr_bitlen_ipv6 = 120;
203 number_per_cidr = 16;
204
205 /*
206 * sendq: the amount of data allowed in a clients queue before
207 * they are dropped.
208 */
209 sendq = 100 kbytes;
210 };
211
212 class {
213 name = "opers";
214 ping_time = 5 minutes;
215 number_per_ip = 10;
216 max_number = 100;
217 sendq = 100kbytes;
218 };
219
220 class {
221 name = "server";
222 ping_time = 1 minute 30 seconds;
223
224 /*
225 * ping_warning: how fast a server must reply to a PING before
226 * a warning to opers is generated.
227 */
228 ping_warning = 15 seconds;
229
230 /*
231 * connectfreq: only used in server classes. Specifies the delay
232 * between autoconnecting to servers.
233 */
234 connectfreq = 5 minutes;
235
236 /* max number: the amount of servers to autoconnect to */
237 max_number = 1;
238
239 /* sendq: servers need a higher sendq as they send more data */
240 sendq = 2 megabytes;
241 };
242
243 /* listen {}: contain information about the ports ircd listens on (OLD P:) */
244 listen {
245 /*
246 * port: the specific port to listen on. If no host is specified
247 * before, it will listen on all available IPs.
248 *
249 * Ports are separated via a comma, a range may be specified using ".."
250 */
251
252 /* port: listen on all available IPs, ports 6665 to 6669 */
253 port = 6665 .. 6669;
254
255 /*
256 * Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
257 * unless you are an administrator.
258 *
259 * NOTE: The "flags" directive has to come before "port". Always!
260 */
261 flags = hidden, ssl;
262 host = "192.168.0.1";
263 port = 6697;
264
265 /*
266 * host: set a specific IP/host the ports after the line will listen
267 * on. This may be ipv4 or ipv6.
268 */
269 host = "1.2.3.4";
270 port = 7000, 7001;
271
272 host = "3ffe:1234:a:b:c::d";
273 port = 7002;
274 };
275
276 /* auth {}: allow users to connect to the ircd (OLD I:) */
277 auth {
278 /*
279 * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
280 * lines are permitted per auth block.
281 */
282 user = "*@172.16.0.0/12";
283 user = "*test@123D:B567:*";
284
285 /* password: an optional password that is required to use this block */
286 password = "letmein";
287
288 /*
289 * encrypted: controls whether the auth password above has been
290 * encrypted.
291 */
292 encrypted = yes;
293
294 /*
295 * spoof: fake the users host to this. This is free-form,
296 * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
297 */
298 spoof = "I.still.hate.packets";
299
300 /* class: the class the user is placed in */
301 class = "opers";
302
303 /*
304 * need_password: don't allow users who haven't supplied the correct
305 * password to connect using another auth{} block
306 * ('&' prefix on /stats I if disabled)
307 * need_ident: require the user to have identd to connect ('+' prefix on /stats I)
308 * spoof_notice: enable spoofing notification to admins
309 * exceed_limit: allow a user to exceed class limits ('>' prefix on /stats I)
310 * kline_exempt: exempt this user from k/glines ('^' prefix on /stats I)
311 * gline_exempt: exempt this user from glines ('_' prefix on /stats I)
312 * resv_exempt: exempt this user from resvs ('$' prefix on /stats I)
313 * no_tilde: remove ~ from a user with no ident ('-' prefix on /stats I)
314 * can_flood: allow this user to exceed flood limits ('|' prefix on /stats I)
315 * can_idle: exempt this user from idle restrictions ('<' prefix on /stats I)
316 */
317 flags = need_password, spoof_notice, exceed_limit, kline_exempt,
318 gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
319 };
320
321 auth {
322 /*
323 * redirect: the server and port to redirect a user to. A user does
324 * not have to obey the redirection, the ircd just suggests an alternative
325 * server for them.
326 */
327 redirserv = "irc.fi";
328 redirport = 6667;
329
330 user = "*.fi";
331
332 /* class: a class is required even though it is not used */
333 class = "users";
334 };
335
336 auth {
337 user = "*@*";
338 class = "users";
339 flags = need_ident;
340 };
341
342 /* operator {}: defines ircd operators. (OLD O:)
343 * ircd-hybrid no longer supports local operators, privileges are
344 * controlled via flags.
345 */
346 operator {
347 /* name: the name of the oper */
348 /* Note: operator "opername"{} is also supported */
349 name = "god";
350
351 /*
352 * user: the user@host required for this operator. CIDR is not
353 * supported. Multiple user="" lines are supported.
354 */
355 user = "*god@*";
356 user = "*@127.0.0.1";
357
358 /*
359 * password: the password required to oper. By default this will
360 * need to be encrypted using 'mkpasswd'. MD5 is supported.
361 */
362 password = "etcnjl8juSU1E";
363
364 /*
365 * encrypted: controls whether the oper password above has been
366 * encrypted. (OLD CRYPT_OPER_PASSWORD now optional per operator)
367 */
368 encrypted = yes;
369
370 /*
371 * rsa_public_key_file: the public key for this oper when using Challenge.
372 * A password should not be defined when this is used, see
373 * doc/challenge.txt for more information.
374 */
375 # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
376
377 /* class: the class the oper joins when they successfully /oper */
378 class = "opers";
379
380 /*
381 * umodes: default usermodes opers get when they /oper. If defined,
382 * it will override oper_umodes settings in general {}.
383 * Available usermodes:
384 *
385 * +b - bots - See bot and drone flooding notices
386 * +c - cconn - Client connection/quit notices
387 * +D - deaf - Don't receive channel messages
388 * +d - debug - See debugging notices
389 * +f - full - See I: line full notices
390 * +G - softcallerid - Server Side Ignore for users not on your channels
391 * +g - callerid - Server Side Ignore (for privmsgs etc)
392 * +i - invisible - Not shown in NAMES or WHO unless you share a
393 * a channel
394 * +k - skill - See server generated KILL messages
395 * +l - locops - See LOCOPS messages
396 * +n - nchange - See client nick changes
397 * +r - rej - See rejected client notices
398 * +s - servnotice - See general server notices
399 * +u - unauth - See unauthorized client notices
400 * +w - wallop - See server generated WALLOPS
401 * +x - external - See remote server connection and split notices
402 * +y - spy - See LINKS, STATS, TRACE notices etc.
403 * +z - operwall - See oper generated WALLOPS
404 */
405 # umodes = locops, servnotice, operwall, wallop;
406
407 /*
408 * privileges: controls the activities and commands an oper is
409 * allowed to do on the server. All options default to no.
410 * Available options:
411 *
412 * global_kill: allows remote users to be /KILL'd (OLD 'O' flag)
413 * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
414 * remoteban: allows remote KLINE/UNKLINE
415 * kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
416 * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
417 * gline: allows GLINE (OLD 'G' flag)
418 * xline: allows XLINE (OLD 'X' flag)
419 * operwall: allows OPERWALL
420 * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
421 * via usermode +n
422 * rehash: allows oper to REHASH config (OLD 'H' flag)
423 * die: allows DIE and RESTART (OLD 'D' flag)
424 * admin: gives admin privileges. admins
425 * may (un)load modules and see the
426 * real IPs of servers.
427 * hidden_admin: same as 'admin', but noone can recognize you as
428 * being an admin
429 * hidden_oper: not shown in /stats p (except for other operators)
430 */
431 /* You can either use
432 * die = yes;
433 * rehash = yes;
434 *
435 * or in a flags statement i.e.
436 * flags = die, rehash;
437 *
438 * You can also negate a flag with ~ i.e.
439 * flags = ~remote;
440 *
441 */
442 flags = global_kill, remote, kline, unkline, xline,
443 die, rehash, nick_changes, admin, operwall;
444 };
445
446 /* connect {}: controls servers we connect to (OLD C:, N:, H:, L:) */
447 connect {
448 /* name: the name of the server */
449 name = "irc.uplink.com";
450
451 /*
452 * host: the host or IP to connect to. If a hostname is used it
453 * must match the reverse dns of the server.
454 */
455 host = "192.168.0.1";
456
457 /*
458 * vhost: the IP to bind to when we connect outward to servers.
459 * serverinfo::vhost and serverinfo::vhost6 will be overridden
460 * by this directive.
461 */
462 vhost = "192.168.0.2";
463
464 /*
465 * passwords: the passwords we send (OLD C:) and accept (OLD N:).
466 * The remote server will have these passwords reversed.
467 */
468 send_password = "password";
469 accept_password = "anotherpassword";
470
471 /*
472 * encrypted: controls whether the accept_password above has been
473 * encrypted. (OLD CRYPT_LINK_PASSWORD now optional per connect)
474 */
475 encrypted = no;
476
477 /* port: the port to connect to this server on */
478 port = 6666;
479
480 /*
481 * hub_mask: the mask of servers that this server may hub. Multiple
482 * entries are permitted
483 */
484 hub_mask = "*";
485
486 /*
487 * leaf_mask: the mask of servers this server may not hub. Multiple
488 * entries are permitted. Useful for forbidding EU -> US -> EU routes.
489 */
490 # leaf_mask = "*.uk";
491
492 /* masking: the servername we pretend to be when we connect */
493 # fakename = "*.arpa";
494
495 /* class: the class this server is in */
496 class = "server";
497
498 /*
499 * autoconn: controls whether we autoconnect to this server or not,
500 * dependent on class limits. By default, this is disabled.
501 * compressed: controls whether traffic is compressed via ziplinks.
502 * By default, this is disabled
503 * lazylink: controls whether this server is a LazyLink. LazyLink
504 * servers may NOT hub. See doc/LazyLinks.txt
505 * cryptlink: enable full encryption for all data passing between our
506 * server and this link and rsa authentication.
507 * burst_away: This will send the /away string that users have set
508 * on the server burst. Note this can be a lot of data
509 * and slow down your server burst.
510 * topicburst: Send topics to this server during channel burst. Works
511 * only if the server we are connecting to is capable
512 * of TBURST/TB.
513 */
514 # flags = autoconn, lazylink, compressed, cryptlink, burst_away, topicburst;
515 };
516
517 connect {
518 name = "encrypted.auth.example";
519 host = "some.host.somewhere";
520 port = 6667;
521
522 flags = cryptlink;
523
524 /*
525 * rsa_public_key_file: the path to the public keyfile of the server.
526 * Used instead of passwords.
527 */
528 rsa_public_key_file = "etc/remote.server.keyfile";
529
530 /*
531 * cipher preference: set the preferred cipher for this link
532 *
533 * Available ciphers are:
534 * BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
535 * RC5.12/128 RC5.8/128 3DES/168 DES/56
536 *
537 * NOTE: Some ciphers may not be supported by your OpenSSL.
538 * Check the output from 'configure' for available ciphers.
539 *
540 * NOTE2: To help you decide what cipher to use, tools/encspeed
541 * will show you approximately how fast each cipher is.
542 * However, blowfish is fast and secure, and is probably
543 * a good default for most situations.
544 *
545 * NOTE3: Default if none is set is BF/128
546 *
547 * The cipher *MUST* be the same in both directions. If you
548 * set a cipher preference, your uplink must set the same cipher,
549 * else it will not link.
550 */
551 # cipher_preference = "BF/168";
552 };
553
554 /*
555 * Note: Don't add an extra 'name=' entry if you use
556 * the connect "name"{} feature
557 */
558 connect "ipv6.some.server" {
559 host = "3ffd:dead:beef::1";
560 send_password = "password";
561 accept_password = "password";
562 port = 6666;
563
564 /*
565 * aftype: controls whether the connection uses "ipv4" or "ipv6".
566 * Default is ipv4.
567 */
568 aftype = ipv6;
569 class = "server";
570 };
571
572 /* cluster{}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
573 * automatically (OLD hyb6 SLAVE_SERVERS)
574 */
575 cluster {
576 /* name: the server to share with, this can take wildcards */
577 /* NOTE: only local actions will be clustered, meaning if
578 * the server receives a shared kline/unkline/etc, it
579 * will not be propagated to clustered servers.
580 *
581 * Remote servers are not necessarily required to accept
582 * clustered lines, they need a shared{} for *THIS* server
583 * in order to accept them.
584 */
585 name = "*.arpa";
586
587 /*
588 * type: list of what to share, options are as follows:
589 * kline - share klines
590 * tkline - share temporary klines
591 * unkline - share unklines
592 * xline - share xlines
593 * txline - share temporary xlines
594 * unxline - share unxlines
595 * resv - share resvs
596 * tresv - share temporary resvs
597 * unresv - share unresvs
598 * locops - share locops
599 * all - share all of the above (default)
600 */
601 type = kline, unkline, locops, xline, resv;
602 };
603
604 /* shared {}: users that are allowed to remote kline (OLD U:) */
605 shared {
606 /*
607 * name: the server the user must be on to set klines. If this is not
608 * specified, the user will be allowed to kline from all servers.
609 */
610 name = "irc2.some.server";
611
612 /*
613 * user: the user@host mask that is allowed to set klines. If this is
614 * not specified, all users on the server above will be allowed to set
615 * a remote kline.
616 */
617 user = "oper@my.host.is.spoofed";
618
619 /*
620 * type: list of what to share, options are as follows:
621 * kline - allow oper/server to kline
622 * tkline - allow temporary klines
623 * unkline - allow oper/server to unkline
624 * xline - allow oper/server to xline
625 * txline - allow temporary xlines
626 * unxline - allow oper/server to unxline
627 * resv - allow oper/server to resv
628 * tresv - allow temporary resvs
629 * unresv - allow oper/server to unresv
630 * locops - allow oper/server to locops - only used for servers that cluster
631 * all - allow oper/server to do all of the above (default)
632 */
633 type = kline, unkline, resv;
634 };
635
636 /* kill {}: users that are not allowed to connect (OLD K:)
637 * Oper issued klines will be added to the specified kline config
638 */
639 kill {
640 user = "bad@*.hacked.edu";
641 reason = "Obviously hacked account";
642 };
643
644 kill {
645 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.org$";
646 type = regex;
647 };
648
649 /* deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
650 * Oper issued dlines will be added to the specified dline config
651 */
652 deny {
653 ip = "10.0.1.0/24";
654 reason = "Reconnecting vhosted bots";
655 };
656
657 /* exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:) */
658 exempt {
659 ip = "192.168.0.0/16";
660 };
661
662 /* resv {}: nicks and channels users may not use/join (OLD Q:) */
663 resv {
664 /* reason: the reason for the proceeding resv's */
665 reason = "There are no services on this network";
666
667 /* resv: the nicks and channels users may not join/use */
668 nick = "nickserv";
669 nick = "chanserv";
670 channel = "#services";
671
672 /* resv: wildcard masks are also supported in nicks only */
673 reason = "Clone bots";
674 nick = "clone*";
675 };
676
677 /* gecos {}: The X: replacement, used for banning users based on their
678 * "realname".
679 */
680 gecos {
681 name = "*sex*";
682 reason = "Possible spambot";
683 };
684
685 gecos {
686 name = "sub7server";
687 reason = "Trojan drone";
688 };
689
690 gecos {
691 name = "*http*";
692 reason = "Spambot";
693 };
694
695 gecos {
696 name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
697 type = regex;
698 };
699
700 /*
701 * channel {}
702 *
703 * The channel block contains options pertaining to channels
704 */
705 channel {
706 /*
707 * restrict_channels: reverse channel RESVs logic, only reserved
708 * channels are allowed
709 */
710 restrict_channels = no;
711
712 /*
713 * disable_local_channels: prevent users from joining &channels.
714 */
715 disable_local_channels = no;
716
717 /*
718 * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
719 * that can join a +i channel without an invite.
720 */
721 use_invex = yes;
722
723 /*
724 * use_except: Enable/disable channel mode +e, a n!u@h list of masks
725 * that can join a channel through a ban (+b).
726 */
727 use_except = yes;
728
729 /*
730 * use_knock: Allows users to request an invite to a channel that
731 * is locked somehow (+ikl). If the channel is +p or you are banned
732 * the knock will not be sent.
733 */
734 use_knock = yes;
735
736 /*
737 * knock_delay: The amount of time a user must wait between issuing
738 * the knock command.
739 */
740 knock_delay = 5 minutes;
741
742 /*
743 * knock_delay_channel: How often a knock to any specific channel
744 * is permitted, regardless of the user sending the knock.
745 */
746 knock_delay_channel = 1 minute;
747
748 /*
749 * burst topicwho: enable sending of who set topic on topicburst
750 * default is yes
751 */
752 burst_topicwho = yes;
753
754 /* max chans: The maximum number of channels a user can join/be on. */
755 max_chans_per_user = 15;
756
757 /* quiet_on_ban: stop banned people talking in channels. */
758 quiet_on_ban = yes;
759
760 /* max_bans: maximum number of +b/e/I modes in a channel */
761 max_bans = 25;
762
763 /*
764 * how many joins in how many seconds constitute a flood, use 0 to
765 * disable. +b opers will be notified (changeable via /set)
766 */
767 join_flood_count = 16;
768 join_flood_time = 8 seconds;
769
770 /*
771 * splitcode: The ircd will now check splitmode every few seconds.
772 *
773 * Either split users or split servers can activate splitmode, but
774 * both conditions must be met for the ircd to deactivate splitmode.
775 *
776 * You may force splitmode to be permanent by /quote set splitmode on
777 */
778
779 /*
780 * default_split_user_count: when the usercount is lower than this level,
781 * consider ourselves split. This must be set for automatic splitmode.
782 */
783 default_split_user_count = 0;
784
785 /*
786 * default_split_server_count: when the servercount is lower than this,
787 * consider ourselves split. This must be set for automatic splitmode.
788 */
789 default_split_server_count = 0;
790
791 /* split no create: disallow users creating channels on split. */
792 no_create_on_split = yes;
793
794 /* split: no join: disallow users joining channels at all on a split */
795 no_join_on_split = no;
796 };
797
798 /*
799 * serverhide {}
800 *
801 * The serverhide block contains the options regarding serverhiding
802 */
803 serverhide {
804 /*
805 * flatten_links: this option will show all servers in /links appear
806 * that they are linked to this current server
807 */
808 flatten_links = no;
809
810 /*
811 * links_delay: how often to update the links file when it is
812 * flattened.
813 */
814 links_delay = 5 minutes;
815
816 /*
817 * hidden: hide this server from a /links output on servers that
818 * support it. this allows hub servers to be hidden etc.
819 */
820 hidden = no;
821
822 /*
823 * disable_hidden: prevent servers hiding themselves from a
824 * /links output.
825 */
826 disable_hidden = no;
827
828 /*
829 * hide_servers: hide remote servernames everywhere and instead use
830 * hidden_name and network_desc.
831 */
832 hide_servers = no;
833
834 /*
835 * Use this as the servername users see if hide_servers = yes.
836 */
837 hidden_name = "*.hidden.com";
838
839 /*
840 * hide_server_ips: If this is disabled, opers will be unable to see servers
841 * ips and will be shown a masked ip, admins will be shown the real ip.
842 *
843 * If this is enabled, nobody can see a servers ip. *This is a kludge*, it
844 * has the side effect of hiding the ips everywhere, including logfiles.
845 *
846 * We recommend you leave this disabled, and just take care with who you
847 * give admin=yes; to.
848 */
849 hide_server_ips = no;
850 };
851
852 /*
853 * general {}
854 *
855 * The general block contains many of the options that were once compiled
856 * in options in config.h. The general block is read at start time.
857 */
858 general {
859 /*
860 * gline_min_cidr: the minimum required length of a CIDR bitmask
861 * for IPv4 based glines
862 */
863 gline_min_cidr = 16;
864
865 /*
866 * gline_min_cidr6: the minimum required length of a CIDR bitmask
867 * for IPv6 based glines
868 */
869 gline_min_cidr6 = 48;
870
871 /*
872 * Whether to automatically set mode +i on connecting users.
873 */
874 invisible_on_connect = yes;
875
876 /*
877 * If you don't explicitly specify burst_away in your connect blocks, then
878 * they will default to the burst_away value below.
879 */
880 burst_away = no;
881
882 /*
883 * Show "actually using host <ip>" on /whois when possible.
884 */
885 use_whois_actually = yes;
886
887 /*
888 * Max time from the nickname change that still causes KILL
889 * automatically to switch for the current nick of that user. (seconds)
890 */
891 kill_chase_time_limit = 90;
892
893 /*
894 * If hide_spoof_ips is disabled, opers will be allowed to see the real IP of spoofed
895 * users in /trace etc. If this is defined they will be shown a masked IP.
896 */
897 hide_spoof_ips = yes;
898
899 /*
900 * Ignore bogus timestamps from other servers. Yes, this will desync
901 * the network, but it will allow chanops to resync with a valid non TS 0
902 *
903 * This should be enabled network wide, or not at all.
904 */
905 ignore_bogus_ts = no;
906
907 /*
908 * disable_auth: completely disable ident lookups; if you enable this,
909 * be careful of what you set need_ident to in your auth {} blocks
910 */
911 disable_auth = no;
912
913 /* disable_remote_commands: disable users doing commands on remote servers */
914 disable_remote_commands = no;
915
916 /*
917 * Disable temporary kline/xline expire notices yes/no
918 */
919 tkline_expire_notices = no;
920
921 /*
922 * default_floodcount: the default value of floodcount that is configurable
923 * via /quote set floodcount. This is the amount of lines a user
924 * may send to any other user/channel in one second.
925 */
926 default_floodcount = 10;
927
928 /*
929 * failed_oper_notice: send a notice to all opers on the server when
930 * someone tries to OPER and uses the wrong password, host or ident.
931 */
932 failed_oper_notice = yes;
933
934 /*
935 * dots_in_ident: the amount of '.' characters permitted in an ident
936 * reply before the user is rejected.
937 */
938 dots_in_ident = 2;
939
940 /*
941 * dot_in_ip6_addr: ircd-hybrid-6.0 and earlier will disallow hosts
942 * without a '.' in them. this will add one to the end. only needed
943 * for older servers.
944 */
945 dot_in_ip6_addr = yes;
946
947 /*
948 * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
949 * placed via the server. klines hand placed are exempt from limits.
950 * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
951 */
952 min_nonwildcard = 4;
953
954 /*
955 * min_nonwildcard_simple: the minimum non wildcard characters in
956 * gecos bans. wildcard chars: '*' '?' '#'
957 */
958 min_nonwildcard_simple = 3;
959
960 /* max_accept: maximum allowed /accept's for +g usermode */
961 max_accept = 20;
962
963 /* anti_nick_flood: enable the nickflood control code */
964 anti_nick_flood = yes;
965
966 /* nick flood: the nick changes allowed in the specified period */
967 max_nick_time = 20 seconds;
968 max_nick_changes = 5;
969
970 /*
971 * anti_spam_exit_message_time: the minimum time a user must be connected
972 * before custom quit messages are allowed.
973 */
974 anti_spam_exit_message_time = 5 minutes;
975
976 /*
977 * ts delta: the time delta allowed between server clocks before
978 * a warning is given, or before the link is dropped. all servers
979 * should run ntpdate/rdate to keep clocks in sync
980 */
981 ts_warn_delta = 30 seconds;
982 ts_max_delta = 5 minutes;
983
984 /*
985 * kline_with_reason: show the user the reason why they are k/d/glined
986 * on exit. May give away who set k/dline when set via tcm.
987 */
988 kline_with_reason = yes;
989
990 /*
991 * kline_reason: show this message to users on channel
992 * instead of the oper reason.
993 */
994 kline_reason = "Connection closed";
995
996 /*
997 * reject_hold_time: wait this amount of time before disconnecting
998 * a rejected client. Use 0 to disable.
999 */
1000 reject_hold_time = 0;
1001
1002 /*
1003 * warn_no_nline: warn opers about servers that try to connect but
1004 * we don't have a connect {} block for. Twits with misconfigured
1005 * servers can get really annoying with this enabled.
1006 */
1007 warn_no_nline = yes;
1008
1009 /* stats_o_oper only: make stats o (opers) oper only */
1010 stats_o_oper_only = yes;
1011
1012 /* stats_P_oper_only: make stats P (ports) oper only */
1013 stats_P_oper_only = no;
1014
1015 /*
1016 * stats i oper only: make stats i (auth {}) oper only. set to:
1017 * yes: show users no auth blocks, made oper only.
1018 * masked: show users first matching auth block
1019 * no: show users all auth blocks.
1020 */
1021 stats_i_oper_only = masked;
1022
1023 /*
1024 * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1025 * yes: show users no auth blocks, made oper only
1026 * masked: show users first matching auth block
1027 * no: show users all auth blocks.
1028 */
1029 stats_k_oper_only = masked;
1030
1031 /*
1032 * caller_id_wait: time between notifying a +g user that somebody
1033 * is messaging them.
1034 */
1035 caller_id_wait = 1 minute;
1036
1037 /*
1038 * opers_bypass_callerid: allows operators to bypass +g and message
1039 * anyone who has it set (useful if you use services).
1040 */
1041 opers_bypass_callerid = no;
1042
1043 /*
1044 * pace_wait_simple: time between use of less intensive commands
1045 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1046 */
1047 pace_wait_simple = 1 second;
1048
1049 /*
1050 * pace_wait: time between more intensive commands
1051 * (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1052 */
1053 pace_wait = 10 seconds;
1054
1055 /*
1056 * short_motd: send clients a notice telling them to read the motd
1057 * instead of forcing a motd to clients who may simply ignore it.
1058 */
1059 short_motd = no;
1060
1061 /*
1062 * ping_cookie: require clients to respond exactly to a ping command,
1063 * can help block certain types of drones and FTP PASV mode spoofing.
1064 */
1065 ping_cookie = no;
1066
1067 /* no_oper_flood: increase flood limits for opers. */
1068 no_oper_flood = yes;
1069
1070 /*
1071 * true_no_oper_flood: completely eliminate flood limits for opers
1072 * and for clients with can_flood = yes in their auth {} blocks
1073 */
1074 true_no_oper_flood = yes;
1075
1076 /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1077 oper_pass_resv = yes;
1078
1079 /*
1080 * idletime: the maximum amount of time a user may idle before
1081 * they are disconnected
1082 */
1083 idletime = 0;
1084
1085 /* REMOVE ME. The following line checks you've been reading. */
1086 havent_read_conf = 1;
1087
1088 /*
1089 * max_targets: the maximum amount of targets in a single
1090 * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1091 */
1092 max_targets = 4;
1093
1094 /*
1095 * client_flood: maximum amount of data in a clients queue before
1096 * they are dropped for flooding.
1097 */
1098 client_flood = 2560 bytes;
1099
1100 /*
1101 * message_locale: the default message locale
1102 * Use "standard" for the compiled in defaults.
1103 * To install the translated messages, go into messages/ in the
1104 * source directory and run `make install'.
1105 */
1106 message_locale = "standard";
1107
1108 /*
1109 * usermodes configurable: a list of usermodes for the options below
1110 *
1111 * +b - bots - See bot and drone flooding notices
1112 * +c - cconn - Client connection/quit notices
1113 * +D - deaf - Don't receive channel messages
1114 * +d - debug - See debugging notices
1115 * +f - full - See I: line full notices
1116 * +G - softcallerid - Server Side Ignore for users not on your channels
1117 * +g - callerid - Server Side Ignore (for privmsgs etc)
1118 * +i - invisible - Not shown in NAMES or WHO unless you share a
1119 * a channel
1120 * +k - skill - See server generated KILL messages
1121 * +l - locops - See LOCOPS messages
1122 * +n - nchange - See client nick changes
1123 * +r - rej - See rejected client notices
1124 * +s - servnotice - See general server notices
1125 * +u - unauth - See unauthorized client notices
1126 * +w - wallop - See server generated WALLOPS
1127 * +x - external - See remote server connection and split notices
1128 * +y - spy - See LINKS, STATS, TRACE notices etc.
1129 * +z - operwall - See oper generated WALLOPS
1130 */
1131
1132 /* oper_only_umodes: usermodes only opers may set */
1133 oper_only_umodes = bots, cconn, debug, full, skill, nchange,
1134 rej, spy, external, operwall, locops, unauth;
1135
1136 /* oper_umodes: default usermodes opers get when they /oper */
1137 oper_umodes = bots, locops, servnotice, operwall, wallop;
1138
1139 /*
1140 * servlink_path: path to 'servlink' program used by ircd to handle
1141 * encrypted/compressed server <-> server links.
1142 *
1143 * only define if servlink is not in same directory as ircd itself.
1144 */
1145 #servlink_path = "/usr/local/ircd/bin/servlink";
1146
1147 /*
1148 * default_cipher_preference: default cipher to use for cryptlink when none is
1149 * specified in connect block.
1150 */
1151 #default_cipher_preference = "BF/168";
1152
1153 /*
1154 * use_egd: if your system does not have *random devices yet you
1155 * want to use OpenSSL and encrypted links, enable this. Beware -
1156 * EGD is *very* CPU intensive when gathering data for its pool
1157 */
1158 # use_egd = yes;
1159
1160 /*
1161 * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1162 * which automatically finds the path.
1163 */
1164 # egdpool_path = "/var/run/egd-pool";
1165
1166
1167 /*
1168 * compression_level: level of compression for compressed links between
1169 * servers.
1170 *
1171 * values are between: 1 (least compression, fastest)
1172 * and: 9 (most compression, slowest).
1173 */
1174 # compression_level = 6;
1175
1176 /*
1177 * throttle_time: the minimum amount of time between connections from
1178 * the same ip. exempt {} blocks are excluded from this throttling.
1179 * Offers protection against flooders who reconnect quickly.
1180 * Set to 0 to disable.
1181 */
1182 throttle_time = 10;
1183 };
1184
1185 glines {
1186 /* enable: enable glines, network wide temp klines */
1187 enable = yes;
1188
1189 /* duration: the amount of time a gline will remain on your server before expiring */
1190 duration = 1 day;
1191
1192 /* logging: which types of rules you want to log when triggered (choose reject or block) */
1193 logging = reject, block;
1194
1195 /*
1196 * NOTE: gline ACLs can cause a desync of glines throughout the network, meaning some servers
1197 * may have a gline triggered, and others may not. Also, you only need insert rules for glines
1198 * that you want to block and/or reject. If you want to accept and propagate the gline, do NOT
1199 * put a rule for it.
1200 */
1201
1202 /* user@host for rule to apply to */
1203 user = "god@I.still.hate.packets";
1204 /* server for rule to apply to */
1205 name = "hades.arpa";
1206
1207 /*
1208 * action: action to take when a matching gline is found. options are:
1209 * reject - do not apply the gline locally
1210 * block - do not propagate the gline
1211 */
1212 action = reject, block;
1213
1214 user = "god@*";
1215 name = "*";
1216 action = block;
1217 };
1218
1219 modules {
1220 /*
1221 * module path: other paths to search for modules specified below
1222 * and in /modload.
1223 */
1224 path = "/usr/local/ircd/modules";
1225 path = "/usr/local/ircd/modules/autoload";
1226
1227 /* module: the name of a module to load on startup/rehash */
1228 #module = "some_module.so";
1229 };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28