/[svn]/branches/ircd-hybrid-20121027/etc/example.efnet.conf
ViewVC logotype

Contents of /branches/ircd-hybrid-20121027/etc/example.efnet.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1587 - (show annotations)
Sat Oct 27 20:46:16 2012 UTC (7 years, 9 months ago) by michael
File size: 39018 byte(s)
- Moving directories

1 /* doc/example.efnet.conf - ircd-hybrid-7 EFnet Example configuration file
2 * Copyright (C) 2000-2011 Hybrid Development Team
3 *
4 * Written by ejb, wcampbel, db, leeh and others
5 * Other example configurations can be found in the source dir under
6 * etc/.
7 *
8 * $Id$
9 */
10
11 /* IMPORTANT NOTES:
12 *
13 * auth {} blocks MUST be specified in order of precedence. The first one
14 * that matches a user will be used. So place spoofs first, then specials,
15 * then general access.
16 *
17 * Shell style (#), C++ style (//) and C style comments are supported.
18 *
19 * Files may be included by either:
20 * .include "filename"
21 * .include <filename>
22 *
23 * Times/durations are written as:
24 * 12 hours 30 minutes 1 second
25 *
26 * Valid units of time:
27 * month, week, day, hour, minute, second
28 *
29 * Valid units of size:
30 * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31 *
32 * Sizes and times may be singular or plural.
33 */
34
35 /* EFNET NOTE:
36 *
37 * This configuration file is a BASIC configuration file for use
38 * on EFnet. You MUST still take the time to set this file up
39 * properly.
40 *
41 * DISCLAIMER: This file was submitted by Disciple@EFnet and has
42 * since been modified by the Hybrid team.
43 */
44
45 /*
46 * serverinfo {}: contains information about the server. (OLD M:)
47 */
48 serverinfo {
49 /*
50 * name: the name of this server. This cannot be changed at runtime.
51 */
52 name = "efnet.irc";
53
54 /*
55 * sid: a server's unique ID. This is three characters long and must
56 * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
57 * a digit, followed by 2 alpha-numerical letters.
58 * NOTE: The letters must be capitalized. This cannot be changed at runtime.
59 */
60 sid = "_CHANGE_ME_";
61
62 /*
63 * description: the description of the server. '[' and ']' may not
64 * be used here for compatibility with older servers.
65 */
66 description = "hybrid-7 test server";
67
68 /*
69 * network info: the name and description of the network this server
70 * is on. Shown in the 005 reply and used with serverhiding.
71 */
72 network_name = "EFnet";
73 network_desc = "Eris Free Network";
74
75 /*
76 * hub: allow this server to act as a hub and have multiple servers
77 * connected to it.
78 */
79 hub = no;
80
81 /*
82 * vhost: the IP to bind to when we connect outward to ipv4 servers.
83 * This should be an ipv4 IP only, or "*" for INADDR_ANY.
84 */
85 #vhost = "192.169.0.1";
86
87 /*
88 * vhost6: the IP to bind to when we connect outward to ipv6 servers.
89 * This should be an ipv6 IP only, or "*" for INADDR_ANY.
90 */
91 #vhost6 = "3ffe:80e8:546::2";
92
93 /* max_clients: the maximum number of clients allowed to connect */
94 max_clients = 512;
95
96 /*
97 * rsa_private_key_file: the path to the file containing our
98 * rsa key for cryptlink.
99 *
100 * Example command to store a 2048 bit RSA keypair in
101 * rsa.key, and the public key in rsa.pub:
102 *
103 * openssl genrsa -out rsa.key 2048
104 * openssl rsa -in rsa.key -pubout -out rsa.pub
105 * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
106 * chmod 0600 rsa.key
107 * chmod 0644 rsa.pub
108 */
109 #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
110
111 /*
112 * ssl_certificate_file: the path to the file containing our
113 * ssl certificate for encrypted client connection.
114 *
115 * This assumes your private RSA key is stored in rsa.key. You
116 * MUST have an RSA key in order to generate the certificate
117 *
118 * openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
119 *
120 * See http://www.openssl.org/docs/HOWTO/certificates.txt
121 *
122 * Please use the following values when generating the cert
123 *
124 * Organization Name: Network Name
125 * Organization Unit Name: changme.someirc.net
126 * Common Name: irc.someirc.net
127 * E-mail: you@domain.com
128 */
129 #ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
130
131 /*
132 * ssl_server_protocol:
133 * SSL/TLS protocols we provide for incoming secure connections.
134 * This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
135 * SSLv2 is not suppported. This cannot be changed at runtime.
136 */
137 #ssl_server_protocol = sslv3, tlsv1;
138 };
139
140 /*
141 * admin {}: contains admin information about the server. (OLD A:)
142 */
143 admin {
144 name = "EFnet Admin";
145 description = "Main Server Administrator";
146 email = "<irc-admin@efnet.irc>";
147 };
148
149 /*
150 * log {}: contains information about logfiles.
151 */
152 log {
153 /* Do you want to enable logging to ircd.log? */
154 use_logging = yes;
155
156 /*
157 * logfiles: the logfiles to use for user connects, /oper uses,
158 * and failed /oper. These files must exist for logging to be used.
159 */
160 fname_userlog = "logs/userlog";
161 fname_operlog = "logs/operlog";
162 fname_killlog = "logs/kill";
163 fname_klinelog = "logs/kline";
164 fname_glinelog = "logs/gline";
165
166 /*
167 * log_level: the amount of detail to log in ircd.log. The
168 * higher, the more information is logged. May be changed
169 * once the server is running via /quote SET LOG. Either:
170 * L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
171 */
172 log_level = L_INFO;
173 };
174
175 /*
176 * class {}: contains information about classes for users (OLD Y:)
177 */
178 class {
179 /* name: the name of the class. classes are text now */
180 name = "users";
181
182 /*
183 * ping_time: how often a client must reply to a PING from the
184 * server before they are dropped.
185 */
186 ping_time = 90 seconds;
187
188 /*
189 * number_per_ip: how many local users are allowed to connect
190 * from one IP (optional)
191 */
192 number_per_ip = 2;
193
194 /*
195 * max_local: how many local users are allowed to connect
196 * from one ident@host (optional)
197 */
198 max_local = 2;
199
200 /*
201 * max_global: network-wide limit of users per ident@host (optional)
202 */
203 max_global = 10;
204
205 /*
206 * max_number: the maximum number of users allowed in this class (optional)
207 */
208 max_number = 100;
209
210 /*
211 * the following lines are optional and allow you to define
212 * how many users can connect from one /NN subnet
213 */
214 cidr_bitlen_ipv4 = 24;
215 cidr_bitlen_ipv6 = 120;
216 number_per_cidr = 16;
217
218 /*
219 * sendq: the amount of data allowed in a clients queue before
220 * they are dropped.
221 */
222 sendq = 100 kbytes;
223 };
224
225 class {
226 name = "opers";
227
228 /*
229 * contrary to seeming popular belief, setting ping time
230 * higher for an oper is NOT doing them a favor.
231 * Since if a link is dead its dead and it means
232 * you have to use another nick long enough to kill the old one :-)
233 * Its much better to use a fairly standard 90 second ping time
234 */
235 ping_time = 90 seconds;
236 number_per_ip = 10;
237 max_number = 100;
238 sendq = 1 mbyte;
239 };
240
241 class {
242 name = "server";
243
244 /*
245 * Same thing here. It's a fallacy to think increasing
246 * ping time for servers is a "good idea." All it leads to
247 * is "ghosting" on one end. Not a good idea.
248 */
249 ping_time = 90 seconds;
250
251 /*
252 * ping_warning: how fast a server must reply to a PING before
253 * a warning to opers is generated.
254 */
255 ping_warning = 15 seconds;
256
257 /*
258 * connectfreq: only used in server classes. Specifies the delay
259 * between autoconnecting to servers.
260 *
261 * Both comstud and I recommend 10 minutes a few years ago.
262 * 15 minutes might be right now. The reason you don't want it too
263 * low is, you make the servers reconnect too quickly with
264 * a large sendq, and they _will_ nick collide. badly. 5 minutes
265 * IS way too short.
266 */
267 connectfreq = 15 minutes;
268
269 /* max number: the amount of servers to autoconnect to */
270 max_number = 1;
271
272 /* sendq: servers need a higher sendq as they send more data */
273 sendq = 15 megabytes;
274 };
275
276 /*
277 * listen {}: contains information about the ports ircd listens on (OLD P:)
278 */
279 listen {
280 /*
281 * port: the specific port to listen on. If no host is specified
282 * before, it will listen on all available IPs.
283 *
284 * Ports are separated via a comma, a range may be specified using ".."
285 */
286
287 /* port: listen on all available IPs, ports 6665 to 6669 */
288 port = 6665 .. 6669;
289
290 /*
291 * Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
292 * unless you are an administrator.
293 *
294 * NOTE: The "flags" directive has to come before "port". Always!
295 *
296 * Currently available flags are:
297 *
298 * ssl - Port is for SSL client connections only
299 * server - Only server connections are permitted
300 * hidden - Port is hidden from /stats P
301 */
302 flags = hidden, ssl;
303 host = "192.168.0.1";
304 port = 6697;
305
306 /*
307 * host: set a specific IP/host the ports after the line will listen
308 * on. This may be ipv4 or ipv6.
309 */
310 host = "1.2.3.4";
311 port = 7000, 7001;
312
313 host = "3ffe:1234:a:b:c::d";
314 port = 7002;
315 };
316
317 /*
318 * auth {}: allow users to connect to the ircd (OLD I:)
319 */
320 auth {
321 /*
322 * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
323 * lines are permitted per auth block.
324 */
325 user = "*@172.16.0.0/12";
326 user = "*test@123D:B567:*";
327
328 /* password: an optional password that is required to use this block */
329 password = "letmein";
330
331 /*
332 * encrypted: controls whether the auth password above has been
333 * encrypted.
334 */
335 encrypted = yes;
336
337 /*
338 * spoof: fake the users host to this. This is free-form,
339 * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
340 */
341 spoof = "I.still.hate.packets";
342
343 /* class: the class the user is placed in */
344 class = "opers";
345
346 /*
347 * need_password: don't allow users who haven't supplied the correct
348 * password to connect using another auth{} block
349 * ('&' prefix on /stats I if disabled)
350 * need_ident: require the user to have identd to connect ('+' prefix on /stats I)
351 * spoof_notice: enable spoofing notification to admins
352 * exceed_limit: allow a user to exceed class limits ('>' prefix on /stats I)
353 * kline_exempt: exempt this user from k/glines ('^' prefix on /stats I)
354 * gline_exempt: exempt this user from glines ('_' prefix on /stats I)
355 * resv_exempt: exempt this user from resvs ('$' prefix on /stats I)
356 * no_tilde: remove ~ from a user with no ident ('-' prefix on /stats I)
357 * can_flood: allow this user to exceed flood limits ('|' prefix on /stats I)
358 * can_idle: exempt this user from idle restrictions ('<' prefix on /stats I)
359 */
360 flags = need_password, spoof_notice, exceed_limit, kline_exempt,
361 gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
362 };
363
364 auth {
365 /*
366 * redirect: the server and port to redirect a user to. A user does
367 * not have to obey the redirection, the ircd just suggests an alternative
368 * server for them.
369 */
370 redirserv = "this.is.not.a.real.server";
371 redirport = 6667;
372
373 user = "*.server";
374
375 /* class: a class is required even though it is not used */
376 class = "users";
377 };
378
379 auth {
380 user = "*@*";
381 class = "users";
382 flags = need_ident;
383 };
384
385 /*
386 * operator {}: defines ircd operators. (OLD O:)
387 *
388 * ircd-hybrid no longer supports local operators, privileges are
389 * controlled via flags.
390 */
391 operator {
392 /* name: the name of the oper */
393 /* NOTE: operator "opername"{} is also supported */
394 name = "god";
395
396 /*
397 * user: the user@host required for this operator. CIDR is not
398 * supported. Multiple user="" lines are supported.
399 */
400 user = "*god@*";
401 user = "*@127.0.0.1";
402
403 /*
404 * password: the password required to oper. By default this will
405 * need to be encrypted by using the provided mkpasswd tool.
406 * Several password hash algorithms are available depending
407 * on your system's crypt() implementation. For example, a modern
408 * glibc already has support for SHA-256/512, and MD5 encryption
409 * algorithms.
410 */
411 password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
412
413 /*
414 * encrypted: controls whether the oper password above has been
415 * encrypted.
416 */
417 encrypted = yes;
418
419 /*
420 * rsa_public_key_file: the public key for this oper when using Challenge.
421 * A password should not be defined when this is used, see
422 * doc/challenge.txt for more information.
423 */
424 # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
425
426 /* class: the class the oper joins when they successfully /oper */
427 class = "opers";
428
429 /*
430 * umodes: default usermodes opers get when they /oper. If defined,
431 * it will override oper_umodes settings in general {}.
432 * Available usermodes:
433 *
434 * +b - bots - See bot and drone flooding notices
435 * +c - cconn - Client connection/quit notices
436 * +C - cconn_full - Client connection/quit notices full
437 * +D - deaf - Don't receive channel messages
438 * +d - debug - See debugging notices
439 * +f - full - See I: line full notices
440 * +G - softcallerid - Server Side Ignore for users not on your channels
441 * +g - callerid - Server Side Ignore (for privmsgs etc)
442 * +i - invisible - Not shown in NAMES or WHO unless you share a
443 * a channel
444 * +k - skill - See server generated KILL messages
445 * +l - locops - See LOCOPS messages
446 * +n - nchange - See client nick changes
447 * +r - rej - See rejected client notices
448 * +s - servnotice - See general server notices
449 * +u - unauth - See unauthorized client notices
450 * +w - wallop - See server generated WALLOPS
451 * +x - external - See remote server connection and split notices
452 * +y - spy - See LINKS, STATS, TRACE notices etc.
453 * +z - operwall - See oper generated WALLOPS
454 */
455 # umodes = locops, servnotice, operwall, wallop;
456
457 /*
458 * privileges: controls the activities and commands an oper is
459 * allowed to do on the server. All options default to no.
460 * Available options:
461 *
462 * global_kill: allows remote users to be /KILL'd (OLD 'O' flag)
463 * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
464 * remoteban: allows remote KLINE/UNKLINE
465 * kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
466 * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
467 * gline: allows GLINE (OLD 'G' flag)
468 * xline: allows XLINE (OLD 'X' flag)
469 * operwall: allows OPERWALL
470 * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
471 * via usermode +n
472 * rehash: allows oper to REHASH config (OLD 'H' flag)
473 * die: allows DIE and RESTART (OLD 'D' flag)
474 * admin: gives admin privileges. admins
475 * may (un)load modules and see the
476 * real IPs of servers.
477 * hidden_admin: same as 'admin', but noone can recognize you as
478 * being an admin
479 * hidden_oper: not shown in /stats p (except for other operators)
480 *
481 * A flag can be negated with ~ i.e.
482 * flags = ~remote;
483 */
484 flags = global_kill, remote, kline, unkline, xline,
485 die, rehash, nick_changes, admin, operwall;
486 };
487
488 /*
489 * connect {}: controls servers we connect to (OLD C:, N:, H:, L:)
490 */
491 connect {
492 /* name: the name of the server */
493 name = "irc.uplink.com";
494
495 /*
496 * host: the host or IP to connect to. If a hostname is used it
497 * must match the reverse dns of the server.
498 */
499 host = "192.168.0.1";
500
501 /*
502 * vhost: the IP to bind to when we connect outward to servers.
503 * serverinfo::vhost and serverinfo::vhost6 will be overridden
504 * by this directive.
505 */
506 vhost = "192.168.0.2";
507
508 /*
509 * passwords: the passwords we send (OLD C:) and accept (OLD N:).
510 * The remote server will have these passwords reversed.
511 */
512 send_password = "password";
513 accept_password = "anotherpassword";
514
515 /*
516 * encrypted: controls whether the accept_password above has been
517 * encrypted.
518 */
519 encrypted = no;
520
521 /* port: the port to connect to this server on */
522 port = 6666;
523
524 /*
525 * hub_mask: the mask of servers that this server may hub. Multiple
526 * entries are permitted
527 */
528 hub_mask = "*";
529
530 /*
531 * leaf_mask: the mask of servers this server may not hub. Multiple
532 * entries are permitted. Useful for forbidding EU -> US -> EU routes.
533 */
534 # leaf_mask = "*.uk";
535
536 /* class: the class this server is in */
537 class = "server";
538
539 /*
540 * autoconn: controls whether we autoconnect to this server or not,
541 * dependent on class limits. By default, this is disabled.
542 * compressed: controls whether traffic is compressed via ziplinks.
543 * By default, this is disabled
544 * cryptlink: enable full encryption for all data passing between our
545 * server and this link and rsa authentication.
546 * burst_away: This will send the /away string that users have set
547 * on the server burst. Note this can be a lot of data
548 * and slow down your server burst.
549 * topicburst: Send topics to this server during channel burst. Works
550 * only if the server we are connecting to is capable
551 * of TBURST/TB.
552 */
553 # flags = autoconn, compressed, cryptlink, burst_away, topicburst;
554 };
555
556 connect {
557 name = "encrypted.auth.example";
558 host = "some.host.somewhere";
559 port = 6667;
560
561 flags = cryptlink;
562
563 /*
564 * rsa_public_key_file: the path to the public keyfile of the server.
565 * Used instead of passwords.
566 */
567 rsa_public_key_file = "etc/remote.server.keyfile";
568
569 /*
570 * cipher preference: set the preferred cipher for this link
571 *
572 * Available ciphers are:
573 * BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
574 * RC5.12/128 RC5.8/128 3DES/168 DES/56
575 *
576 * NOTE: Some ciphers may not be supported by your OpenSSL.
577 * Check the output from 'configure' for available ciphers.
578 *
579 * NOTE2: To help you decide what cipher to use, tools/encspeed
580 * will show you approximately how fast each cipher is.
581 * However, blowfish is fast and secure, and is probably
582 * a good default for most situations.
583 *
584 * NOTE3: Default if none is set is BF/128
585 *
586 * The cipher *MUST* be the same in both directions. If you
587 * set a cipher preference, your uplink must set the same cipher,
588 * else it will not link.
589 */
590 # cipher_preference = "BF/168";
591 };
592
593 /*
594 * NOTE: Don't add an extra 'name=' entry if you use
595 * the connect "name"{} feature
596 */
597 connect "ipv6.some.server" {
598 host = "3ffd:dead:beef::1";
599 send_password = "password";
600 accept_password = "password";
601 port = 6666;
602
603 /*
604 * aftype: controls whether the connection uses "ipv4" or "ipv6".
605 * Default is ipv4.
606 */
607 aftype = ipv6;
608 class = "server";
609 };
610
611 /*
612 * cluster {}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
613 * automatically (OLD hyb6 SLAVE_SERVERS)
614 */
615 cluster {
616 /*
617 * name: the server to share with, this can take wildcards
618 *
619 * NOTE: only local actions will be clustered, meaning if
620 * the server receives a shared kline/unkline/etc, it
621 * will not be propagated to clustered servers.
622 *
623 * Remote servers are not necessarily required to accept
624 * clustered lines, they need a shared{} for *THIS* server
625 * in order to accept them.
626 */
627 name = "*.arpa";
628
629 /*
630 * type: list of what to share, options are as follows:
631 * kline - share klines
632 * tkline - share temporary klines
633 * unkline - share unklines
634 * xline - share xlines
635 * txline - share temporary xlines
636 * unxline - share unxlines
637 * resv - share resvs
638 * tresv - share temporary resvs
639 * unresv - share unresvs
640 * locops - share locops
641 * all - share all of the above (default)
642 */
643 type = kline, unkline, locops, xline, resv;
644 };
645
646 /*
647 * shared {}: users that are allowed to remote kline (OLD U:)
648 *
649 * NOTE: This can be effectively used for remote klines.
650 * Please note that there is no password authentication
651 * for users setting remote klines. You must also be
652 * /oper'd in order to issue a remote kline.
653 */
654 shared {
655 /*
656 * name: the server the user must be on to set klines. If this is not
657 * specified, the user will be allowed to kline from all servers.
658 */
659 name = "irc2.some.server";
660
661 /*
662 * user: the user@host mask that is allowed to set klines. If this is
663 * not specified, all users on the server above will be allowed to set
664 * a remote kline.
665 */
666 user = "oper@my.host.is.spoofed";
667
668 /*
669 * type: list of what to share, options are as follows:
670 * kline - allow oper/server to kline
671 * tkline - allow temporary klines
672 * unkline - allow oper/server to unkline
673 * xline - allow oper/server to xline
674 * txline - allow temporary xlines
675 * unxline - allow oper/server to unxline
676 * resv - allow oper/server to resv
677 * tresv - allow temporary resvs
678 * unresv - allow oper/server to unresv
679 * locops - allow oper/server to locops - only used for servers that cluster
680 * all - allow oper/server to do all of the above (default)
681 */
682 type = kline, unkline, resv;
683 };
684
685 /*
686 * kill {}: users that are not allowed to connect (OLD K:)
687 * Oper issued klines will be added to the specified kline config
688 */
689 kill {
690 user = "bad@*.hacked.edu";
691 reason = "Obviously hacked account";
692 };
693
694 kill {
695 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
696
697 /*
698 * NOTE: You have to set type=regex; when using a regular expression
699 * based user entry
700 */
701 type = regex;
702 };
703
704 /*
705 * deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
706 * Oper issued dlines will be added to the specified dline config
707 */
708 deny {
709 ip = "10.0.1.0/24";
710 reason = "Reconnecting vhosted bots";
711 };
712
713 /*
714 * exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:)
715 *
716 * EFnet Note: We really suggest to enable general::stats_e_disabled
717 * if you plan to exempt EFnet server IPs you don't want to show to
718 * other operators and/or administrators through "STATS e".
719 */
720 exempt {
721 ip = "192.168.0.0/16";
722 };
723
724 /*
725 * resv {}: nicks and channels users may not use/join (OLD Q:)
726 */
727 resv {
728 /* reason: the reason for the proceeding resv's */
729 reason = "There are no services on this network";
730
731 /* resv: the nicks and channels users may not join/use */
732 nick = "nickserv";
733 nick = "chanserv";
734 nick = "operserv";
735 nick = "JUPES";
736 nick = "JUPE";
737 nick = "CH?NF?X"; # CHANFIX (services.int)
738
739 /* These are totally optional, but may be a good idea */
740 nick = "oper";
741 nick = "ircop";
742 nick = "op";
743 nick = "ident";
744 nick = "pass";
745 channel = "#jupedchan";
746
747 /* resv: wildcard masks are also supported in nicks only */
748 reason = "Clone bots";
749 nick = "clone*";
750 };
751
752 /*
753 * gecos {}: The X: replacement, used for banning users based on
754 * their "realname".
755 */
756 gecos {
757 name = "*sex*";
758 reason = "Possible spambot";
759 };
760
761 gecos {
762 name = "sub7server";
763 reason = "Trojan drone";
764 };
765
766 gecos {
767 name = "*http*";
768 reason = "Spambot";
769 };
770
771 gecos {
772 name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
773
774 /*
775 * NOTE: You have to set type=regex; when using a regular expression
776 * based name entry
777 */
778 type = regex;
779 };
780
781 /*
782 * channel {}: The channel block contains options pertaining to channels
783 */
784 channel {
785 /*
786 * disable_fake_channels: this option, if set to 'yes', will
787 * disallow clients to create or join channels that have one
788 * of the following ASCII characters in their name:
789 *
790 * 2 | bold
791 * 3 | mirc color
792 * 15 | plain text
793 * 22 | reverse
794 * 31 | underline
795 * 160 | non-breaking space
796 */
797 disable_fake_channels = yes;
798
799 /*
800 * restrict_channels: reverse channel RESVs logic, only reserved
801 * channels are allowed
802 */
803 restrict_channels = no;
804
805 /*
806 * disable_local_channels: prevent users from joining &channels.
807 */
808 disable_local_channels = no;
809
810 /*
811 * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
812 * that can join a +i channel without an invite.
813 */
814 use_invex = yes;
815
816 /*
817 * use_except: Enable/disable channel mode +e, a n!u@h list of masks
818 * that can join a channel through a ban (+b).
819 */
820 use_except = yes;
821
822 /*
823 * use_knock: Allows users to request an invite to a channel that
824 * is locked somehow (+ikl). If the channel is +p or you are banned
825 * the knock will not be sent.
826 *
827 * EFnet Note: This seems to be used mostly by European servers
828 * and not North American ones.
829 * Please feel free to disable this if you do not
830 * want to run channel knock.
831 * channel knock allows an user to "/quote knock #channel"
832 * to ask for an invite. It is typically used in eu-efnet
833 * to ask for an invite to #eu-opers.
834 * A user who is banned will not have their knock
835 * sent to channel. It is paced, so knock will not
836 * cause a flood.
837 */
838 use_knock = yes;
839
840 /*
841 * knock_delay: The amount of time a user must wait between issuing
842 * the knock command.
843 */
844 knock_delay = 5 minutes;
845
846 /*
847 * knock_delay_channel: How often a knock to any specific channel
848 * is permitted, regardless of the user sending the knock.
849 */
850 knock_delay_channel = 1 minute;
851
852 /*
853 * burst_topicwho: enable sending of who set topic on topicburst
854 * default is yes
855 */
856 burst_topicwho = yes;
857
858 /*
859 * max_chans_per_user: The maximum number of channels a user can
860 * join/be on.
861 */
862 max_chans_per_user = 25;
863
864 /* quiet_on_ban: stop banned people talking in channels. */
865 quiet_on_ban = yes;
866
867 /* max_bans: maximum number of +b/e/I modes in a channel */
868 max_bans = 100;
869
870 /*
871 * how many joins in how many seconds constitute a flood, use 0 to
872 * disable. +b opers will be notified (changeable via /set)
873 */
874 join_flood_count = 16;
875 join_flood_time = 8 seconds;
876
877 /*
878 * splitcode: The ircd will now check splitmode every few seconds.
879 *
880 * Either split users or split servers can activate splitmode, but
881 * both conditions must be met for the ircd to deactivate splitmode.
882 *
883 * You may force splitmode to be permanent by /quote set splitmode on
884 */
885
886 /*
887 * default_split_user_count: when the usercount is lower than this level,
888 * consider ourselves split. This must be set for automatic splitmode.
889 */
890 default_split_user_count = 20000;
891
892 /*
893 * default_split_server_count: when the servercount is lower than this,
894 * consider ourselves split. This must be set for automatic splitmode.
895 */
896 default_split_server_count = 10;
897
898 /* no_create_on_split: disallow users creating channels on split. */
899 no_create_on_split = yes;
900
901 /* no_join_on_split: disallow users joining channels at all on a split. */
902 no_join_on_split = no;
903 };
904
905 /*
906 * serverhide {}: The serverhide block contains the options regarding
907 * serverhiding
908 */
909 serverhide {
910 /*
911 * flatten_links: this option will show all servers in /links appear
912 * that they are linked to this current server
913 *
914 * EFnet Note: While this is not a requirement on EFnet, it
915 * may be a good idea. Except, it's useless
916 * unless the entire net runs it.
917 */
918 flatten_links = no;
919
920 /*
921 * links_delay: how often to update the links file when it is
922 * flattened.
923 */
924 links_delay = 5 minutes;
925
926 /*
927 * hidden: hide this server from a /links output on servers that
928 * support it. This allows hub servers to be hidden etc.
929 */
930 hidden = no;
931
932 /*
933 * disable_hidden: prevent servers hiding themselves from a
934 * /links output.
935 */
936 disable_hidden = no;
937
938 /*
939 * hide_servers: hide remote servernames everywhere and instead use
940 * hidden_name and network_desc.
941 */
942 hide_servers = no;
943
944 /*
945 * Use this as the servername users see if hide_servers = yes.
946 */
947 hidden_name = "*.hidden.com";
948
949 /*
950 * hide_server_ips: If this is disabled, opers will be unable to see
951 * servers ips and will be shown a masked ip, admins will be shown the
952 * real ip.
953 *
954 * If this is enabled, nobody can see a servers ip. *This is a kludge*,
955 * it has the side effect of hiding the ips everywhere, including
956 * logfiles.
957 *
958 * We recommend you leave this disabled, and just take care with who you
959 * give admin=yes; to.
960 */
961 hide_server_ips = yes;
962 };
963
964 /*
965 * general {}: The general block contains many of the options that were once
966 * compiled in options in config.h. The general block is read at start time.
967 */
968 general {
969 /* max_watch: maximum WATCH entries a client can have. */
970 max_watch = 60;
971
972 /*
973 * gline_min_cidr: the minimum required length of a CIDR bitmask
974 * for IPv4 based glines
975 */
976 gline_min_cidr = 16;
977
978 /*
979 * gline_min_cidr6: the minimum required length of a CIDR bitmask
980 * for IPv6 based glines
981 */
982 gline_min_cidr6 = 48;
983
984 /*
985 * Whether to automatically set mode +i on connecting users.
986 */
987 invisible_on_connect = yes;
988
989 /*
990 * If you don't explicitly specify burst_away in your connect blocks, then
991 * they will default to the burst_away value below.
992 */
993 burst_away = no;
994
995 /*
996 * Show "actually using host <ip>" on /whois when possible.
997 */
998 use_whois_actually = yes;
999
1000 /*
1001 * Max time from the nickname change that still causes KILL
1002 * automatically to switch for the current nick of that user.
1003 */
1004 kill_chase_time_limit = 90 seconds;
1005
1006 /*
1007 * If hide_spoof_ips is disabled, opers will be allowed to see the real
1008 * IP of spoofed users in /trace etc. If this is defined they will be
1009 * shown a masked IP.
1010 */
1011 hide_spoof_ips = yes;
1012
1013 /*
1014 * Ignore bogus timestamps from other servers. Yes, this will desync
1015 * the network, but it will allow chanops to resync with a valid non TS 0
1016 *
1017 * This should be enabled network wide, or not at all.
1018 */
1019 ignore_bogus_ts = no;
1020
1021 /*
1022 * disable_auth: completely disable ident lookups; if you enable this,
1023 * be careful of what you set need_ident to in your auth {} blocks
1024 */
1025 disable_auth = no;
1026
1027 /* disable_remote_commands: disable users doing commands on remote servers */
1028 disable_remote_commands = no;
1029
1030 /*
1031 * tkline_expire_notices: enables or disables temporary kline/xline
1032 * expire notices.
1033 */
1034 tkline_expire_notices = no;
1035
1036 /*
1037 * default_floodcount: the default value of floodcount that is configurable
1038 * via /quote set floodcount. This is the amount of lines a user
1039 * may send to any other user/channel in one second.
1040 */
1041 default_floodcount = 10;
1042
1043 /*
1044 * failed_oper_notice: send a notice to all opers on the server when
1045 * someone tries to OPER and uses the wrong password, host or ident.
1046 */
1047 failed_oper_notice = yes;
1048
1049 /*
1050 * dots_in_ident: the amount of '.' characters permitted in an ident
1051 * reply before the user is rejected.
1052 */
1053 dots_in_ident = 2;
1054
1055 /*
1056 * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1057 * placed via the server. klines hand placed are exempt from limits.
1058 * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1059 */
1060 min_nonwildcard = 3;
1061
1062 /*
1063 * min_nonwildcard_simple: the minimum non wildcard characters in
1064 * gecos bans. wildcard chars: '*' '?' '#'
1065 */
1066 min_nonwildcard_simple = 3;
1067
1068 /* max_accept: maximum allowed /accept's for +g usermode */
1069 max_accept = 20;
1070
1071 /* anti_nick_flood: enable the nickflood control code */
1072 anti_nick_flood = yes;
1073
1074 /* nick flood: the nick changes allowed in the specified period */
1075 max_nick_time = 20 seconds;
1076 max_nick_changes = 5;
1077
1078 /*
1079 * anti_spam_exit_message_time: the minimum time a user must be connected
1080 * before custom quit messages are allowed.
1081 */
1082 anti_spam_exit_message_time = 5 minutes;
1083
1084 /*
1085 * ts delta: the time delta allowed between server clocks before
1086 * a warning is given, or before the link is dropped. all servers
1087 * should run ntpdate/rdate to keep clocks in sync
1088 */
1089 ts_warn_delta = 30 seconds;
1090 ts_max_delta = 5 minutes;
1091
1092 /*
1093 * kline_with_reason: show the user the reason why they are k/d/glined
1094 * on exit. May give away who set k/dline when set via tcm.
1095 */
1096 kline_with_reason = yes;
1097
1098 /*
1099 * kline_reason: show this message to users on channel
1100 * instead of the oper reason.
1101 */
1102 kline_reason = "Connection closed";
1103
1104 /*
1105 * reject_hold_time: wait this amount of time before disconnecting
1106 * a rejected client. Use 0 to disable.
1107 */
1108 reject_hold_time = 30 seconds;
1109
1110 /*
1111 * warn_no_nline: warn opers about servers that try to connect but
1112 * we don't have a connect {} block for. Twits with misconfigured
1113 * servers can get really annoying with this enabled.
1114 */
1115 warn_no_nline = yes;
1116
1117 /*
1118 * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1119 * operators and administrators. Doing so is a good idea in case
1120 * there are any exempted (exempt{}) server IPs you don't want to
1121 * see leaked.
1122 */
1123 stats_e_disabled = no;
1124
1125 /* stats_o_oper only: make stats o (opers) oper only */
1126 stats_o_oper_only = yes;
1127
1128 /* stats_P_oper_only: make stats P (ports) oper only */
1129 stats_P_oper_only = yes;
1130
1131 /*
1132 * stats i oper only: make stats i (auth {}) oper only. set to:
1133 * yes: show users no auth blocks, made oper only.
1134 * masked: show users first matching auth block
1135 * no: show users all auth blocks.
1136 */
1137 stats_i_oper_only = yes;
1138
1139 /*
1140 * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1141 * yes: show users no auth blocks, made oper only
1142 * masked: show users first matching auth block
1143 * no: show users all auth blocks.
1144 */
1145 stats_k_oper_only = yes;
1146
1147 /*
1148 * caller_id_wait: time between notifying a +g user that somebody
1149 * is messaging them.
1150 */
1151 caller_id_wait = 1 minute;
1152
1153 /*
1154 * opers_bypass_callerid: allows operators to bypass +g and message
1155 * anyone who has it set (useful if you use services).
1156 */
1157 opers_bypass_callerid = no;
1158
1159 /*
1160 * pace_wait_simple: time between use of less intensive commands
1161 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1162 */
1163 pace_wait_simple = 1 second;
1164
1165 /*
1166 * pace_wait: time between more intensive commands
1167 * (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1168 */
1169 pace_wait = 10 seconds;
1170
1171 /*
1172 * short_motd: send clients a notice telling them to read the motd
1173 * instead of forcing a motd to clients who may simply ignore it.
1174 */
1175 short_motd = no;
1176
1177 /*
1178 * ping_cookie: require clients to respond exactly to a ping command,
1179 * can help block certain types of drones and FTP PASV mode spoofing.
1180 */
1181 ping_cookie = no;
1182
1183 /* no_oper_flood: increase flood limits for opers. */
1184 no_oper_flood = yes;
1185
1186 /*
1187 * true_no_oper_flood: completely eliminate flood limits for opers
1188 * and for clients with can_flood = yes in their auth {} blocks
1189 */
1190 true_no_oper_flood = yes;
1191
1192 /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1193 oper_pass_resv = yes;
1194
1195 /*
1196 * idletime: the maximum amount of time a user may idle before
1197 * they are disconnected
1198 */
1199 idletime = 0;
1200
1201 /* REMOVE ME. The following line checks you've been reading. */
1202 havent_read_conf = 1;
1203
1204 /*
1205 * max_targets: the maximum amount of targets in a single
1206 * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1207 */
1208 max_targets = 4;
1209
1210 /*
1211 * client_flood: maximum amount of data in a clients queue before
1212 * they are dropped for flooding.
1213 */
1214 client_flood = 2560 bytes;
1215
1216 /*
1217 * message_locale: the default message locale
1218 * Use "standard" for the compiled in defaults.
1219 * To install the translated messages, go into messages/ in the
1220 * source directory and run `make install'.
1221 */
1222 message_locale = "standard";
1223
1224 /*
1225 * usermodes configurable: a list of usermodes for the options below
1226 *
1227 * +b - bots - See bot and drone flooding notices
1228 * +c - cconn - Client connection/quit notices
1229 * +C - cconn_full - Client connection/quit notices full
1230 * +D - deaf - Don't receive channel messages
1231 * +d - debug - See debugging notices
1232 * +f - full - See I: line full notices
1233 * +G - softcallerid - Server Side Ignore for users not on your channels
1234 * +g - callerid - Server Side Ignore (for privmsgs etc)
1235 * +i - invisible - Not shown in NAMES or WHO unless you share a
1236 * a channel
1237 * +k - skill - See server generated KILL messages
1238 * +l - locops - See LOCOPS messages
1239 * +n - nchange - See client nick changes
1240 * +r - rej - See rejected client notices
1241 * +s - servnotice - See general server notices
1242 * +u - unauth - See unauthorized client notices
1243 * +w - wallop - See server generated WALLOPS
1244 * +x - external - See remote server connection and split notices
1245 * +y - spy - See LINKS, STATS, TRACE notices etc.
1246 * +z - operwall - See oper generated WALLOPS
1247 */
1248
1249 /* oper_only_umodes: usermodes only opers may set */
1250 oper_only_umodes = bots, cconn, cconn_full, debug, full, skill,
1251 nchange, rej, spy, external, operwall,
1252 locops, unauth;
1253
1254 /* oper_umodes: default usermodes opers get when they /oper */
1255 oper_umodes = bots, locops, servnotice, operwall, wallop;
1256
1257 /*
1258 * servlink_path: path to 'servlink' program used by ircd to handle
1259 * encrypted/compressed server <-> server links.
1260 *
1261 * only define if servlink is not in same directory as ircd itself.
1262 */
1263 #servlink_path = "/usr/local/ircd/bin/servlink";
1264
1265 /*
1266 * default_cipher_preference: default cipher to use for cryptlink when none is
1267 * specified in connect block.
1268 */
1269 #default_cipher_preference = "BF/168";
1270
1271 /*
1272 * use_egd: if your system does not have *random devices yet you
1273 * want to use OpenSSL and encrypted links, enable this. Beware -
1274 * EGD is *very* CPU intensive when gathering data for its pool
1275 */
1276 # use_egd = yes;
1277
1278 /*
1279 * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1280 * which automatically finds the path.
1281 */
1282 # egdpool_path = "/var/run/egd-pool";
1283
1284
1285 /*
1286 * compression_level: level of compression for compressed links between
1287 * servers.
1288 *
1289 * values are between: 1 (least compression, fastest)
1290 * and: 9 (most compression, slowest).
1291 */
1292 # compression_level = 6;
1293
1294 /*
1295 * throttle_time: the minimum amount of time between connections from
1296 * the same ip. exempt {} blocks are excluded from this throttling.
1297 * Offers protection against flooders who reconnect quickly.
1298 * Set to 0 to disable.
1299 */
1300 throttle_time = 0;
1301 };
1302
1303 glines {
1304 /*
1305 * EFnet Note: This feature is required for European EFnet servers
1306 * and is used by several North American servers. As
1307 * such, it has been left on by default. If you
1308 * do not want your server to participate in G:Lines
1309 * you should disable this.
1310 */
1311
1312 /* enable: enable glines, network wide temp klines */
1313 enable = yes;
1314
1315 /*
1316 * duration: the amount of time a gline will remain on your
1317 * server before expiring
1318 */
1319 duration = 1 day;
1320
1321 /*
1322 * logging: which types of rules you want to log when triggered
1323 * (choose reject or block)
1324 */
1325 logging = reject, block;
1326
1327 /*
1328 * NOTE: gline ACLs can cause a desync of glines throughout the
1329 * network, meaning some servers may have a gline triggered, and
1330 * others may not. Also, you only need insert rules for glines
1331 * that you want to block and/or reject. If you want to accept and
1332 * propagate the gline, do NOT put a rule for it.
1333 */
1334
1335 /* user@host for rule to apply to */
1336 user = "god@I.still.hate.packets";
1337 /* server for rule to apply to */
1338 name = "hades.arpa";
1339
1340 /*
1341 * action: action to take when a matching gline is found. options are:
1342 * reject - do not apply the gline locally
1343 * block - do not propagate the gline
1344 */
1345 action = reject, block;
1346
1347 user = "god@*";
1348 name = "*";
1349 action = block;
1350 };
1351
1352 modules {
1353 /*
1354 * path: other paths to search for modules specified below
1355 * and in /modload.
1356 */
1357 path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1358 path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1359
1360 /* module: the name of a module to load on startup/rehash */
1361 #module = "some_module.la";
1362 };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28